diff options
| -rw-r--r-- | drivers/ata/libata-core.c | 16 | ||||
| -rw-r--r-- | drivers/ata/libata-eh.c | 121 | ||||
| -rw-r--r-- | drivers/ata/libata.h | 2 | ||||
| -rw-r--r-- | include/linux/libata.h | 8 |
4 files changed, 142 insertions, 5 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c5c3b1b516e..9bef1a84fe3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -144,7 +144,7 @@ static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CF module_param_named(dma, libata_dma_mask, int, 0444); MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)"); -static int ata_probe_timeout = ATA_TMOUT_INTERNAL / 1000; +static int ata_probe_timeout; module_param(ata_probe_timeout, int, 0444); MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); @@ -1611,6 +1611,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, struct ata_link *link = dev->link; struct ata_port *ap = link->ap; u8 command = tf->command; + int auto_timeout = 0; struct ata_queued_cmd *qc; unsigned int tag, preempted_tag; u32 preempted_sactive, preempted_qc_active; @@ -1683,8 +1684,14 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, spin_unlock_irqrestore(ap->lock, flags); - if (!timeout) - timeout = ata_probe_timeout * 1000; + if (!timeout) { + if (ata_probe_timeout) + timeout = ata_probe_timeout * 1000; + else { + timeout = ata_internal_cmd_timeout(dev, command); + auto_timeout = 1; + } + } rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); @@ -1760,6 +1767,9 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, spin_unlock_irqrestore(ap->lock, flags); + if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout) + ata_internal_cmd_timed_out(dev, command); + return err_mask; } diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 83d1451fa71..d5f03a6e333 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -67,6 +67,8 @@ enum { ATA_ECAT_DUBIOUS_UNK_DEV = 7, ATA_ECAT_NR = 8, + ATA_EH_CMD_DFL_TIMEOUT = 5000, + /* always put at least this amount of time between resets */ ATA_EH_RESET_COOL_DOWN = 5000, @@ -93,6 +95,53 @@ static const unsigned long ata_eh_reset_timeouts[] = { ULONG_MAX, /* > 1 min has elapsed, give up */ }; +static const unsigned long ata_eh_identify_timeouts[] = { + 5000, /* covers > 99% of successes and not too boring on failures */ + 10000, /* combined time till here is enough even for media access */ + 30000, /* for true idiots */ + ULONG_MAX, +}; + +static const unsigned long ata_eh_other_timeouts[] = { + 5000, /* same rationale as identify timeout */ + 10000, /* ditto */ + /* but no merciful 30sec for other commands, it just isn't worth it */ + ULONG_MAX, +}; + +struct ata_eh_cmd_timeout_ent { + const u8 *commands; + const unsigned long *timeouts; +}; + +/* The following table determines timeouts to use for EH internal + * commands. Each table entry is a command class and matches the + * commands the entry applies to and the timeout table to use. + * + * On the retry after a command timed out, the next timeout value from + * the table is used. If the table doesn't contain further entries, + * the last value is used. + * + * ehc->cmd_timeout_idx keeps track of which timeout to use per + * command class, so if SET_FEATURES times out on the first try, the + * next try will use the second timeout value only for that class. + */ +#define CMDS(cmds...) (const u8 []){ cmds, 0 } +static const struct ata_eh_cmd_timeout_ent +ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = { + { .commands = CMDS(ATA_CMD_ID_ATA, ATA_CMD_ID_ATAPI), + .timeouts = ata_eh_identify_timeouts, }, + { .commands = CMDS(ATA_CMD_READ_NATIVE_MAX, ATA_CMD_READ_NATIVE_MAX_EXT), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_SET_MAX, ATA_CMD_SET_MAX_EXT), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_SET_FEATURES), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_INIT_DEV_PARAMS), + .timeouts = ata_eh_other_timeouts, }, +}; +#undef CMDS + static void __ata_port_freeze(struct ata_port *ap); #ifdef CONFIG_PM static void ata_eh_handle_port_suspend(struct ata_port *ap); @@ -238,6 +287,73 @@ void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, #endif /* CONFIG_PCI */ +static int ata_lookup_timeout_table(u8 cmd) +{ + int i; + + for (i = 0; i < ATA_EH_CMD_TIMEOUT_TABLE_SIZE; i++) { + const u8 *cur; + + for (cur = ata_eh_cmd_timeout_table[i].commands; *cur; cur++) + if (*cur == cmd) + return i; + } + + return -1; +} + +/** + * ata_internal_cmd_timeout - determine timeout for an internal command + * @dev: target device + * @cmd: internal command to be issued + * + * Determine timeout for internal command @cmd for @dev. + * + * LOCKING: + * EH context. + * + * RETURNS: + * Determined timeout. + */ +unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + int ent = ata_lookup_timeout_table(cmd); + int idx; + + if (ent < 0) + return ATA_EH_CMD_DFL_TIMEOUT; + + idx = ehc->cmd_timeout_idx[dev->devno][ent]; + return ata_eh_cmd_timeout_table[ent].timeouts[idx]; +} + +/** + * ata_internal_cmd_timed_out - notification for internal command timeout + * @dev: target device + * @cmd: internal command which timed out + * + * Notify EH that internal command @cmd for @dev timed out. This + * function should be called only for commands whose timeouts are + * determined using ata_internal_cmd_timeout(). + * + * LOCKING: + * EH context. + */ +void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + int ent = ata_lookup_timeout_table(cmd); + int idx; + + if (ent < 0) + return; + + idx = ehc->cmd_timeout_idx[dev->devno][ent]; + if (ata_eh_cmd_timeout_table[ent].timeouts[idx + 1] != ULONG_MAX) + ehc->cmd_timeout_idx[dev->devno][ent]++; +} + static void ata_ering_record(struct ata_ering *ering, unsigned int eflags, unsigned int err_mask) { @@ -2600,8 +2716,11 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) ata_eh_detach_dev(dev); /* schedule probe if necessary */ - if (ata_eh_schedule_probe(dev)) + if (ata_eh_schedule_probe(dev)) { ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + memset(ehc->cmd_timeout_idx[dev->devno], 0, + sizeof(ehc->cmd_timeout_idx[dev->devno])); + } return 1; } else { diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 1cf803adbc9..f6f9c28ec7f 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -151,6 +151,8 @@ extern void ata_scsi_dev_rescan(struct work_struct *work); extern int ata_bus_probe(struct ata_port *ap); /* libata-eh.c */ +extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); +extern void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd); extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); extern void ata_scsi_error(struct Scsi_Host *host); extern void ata_port_wait_eh(struct ata_port *ap); diff --git a/include/linux/libata.h b/include/linux/libata.h index 9058c2a325a..035f8e1cd0a 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -237,7 +237,6 @@ enum { /* various lengths of time */ ATA_TMOUT_BOOT = 30000, /* heuristic */ ATA_TMOUT_BOOT_QUICK = 7000, /* heuristic */ - ATA_TMOUT_INTERNAL = 30000, ATA_TMOUT_INTERNAL_QUICK = 5000, /* FIXME: GoVault needs 2s but we can't afford that without @@ -341,6 +340,11 @@ enum { SATA_PMP_RW_TIMEOUT = 3000, /* PMP read/write timeout */ + /* This should match the actual table size of + * ata_eh_cmd_timeout_table in libata-eh.c. + */ + ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 5, + /* Horkage types. May be set by libata or controller on drives (some horkage may be drive/controller pair dependant */ @@ -598,6 +602,8 @@ struct ata_eh_info { struct ata_eh_context { struct ata_eh_info i; int tries[ATA_MAX_DEVICES]; + int cmd_timeout_idx[ATA_MAX_DEVICES] + [ATA_EH_CMD_TIMEOUT_TABLE_SIZE]; unsigned int classes[ATA_MAX_DEVICES]; unsigned int did_probe_mask; unsigned int saved_ncq_enabled; |