diff options
30 files changed, 75 insertions, 75 deletions
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 3549c94467b..c4784494970 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -791,7 +791,7 @@ static __init int setup_additional_cpus(char *s) early_param("additional_cpus", setup_additional_cpus); /* - * cpu_possible_map should be static, it cannot change as cpu's + * cpu_possible_map should be static, it cannot change as CPUs * are onlined, or offlined. The reason is per-cpu data-structures * are allocated by some modules at init time, and dont expect to * do this dynamically on cpu arrival/departure. diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c index aeb79fb28f0..e80c82ce6b7 100644 --- a/arch/ia64/kernel/crash.c +++ b/arch/ia64/kernel/crash.c @@ -163,7 +163,7 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data) return NOTIFY_DONE; nd = (struct ia64_mca_notify_die *)args->err; - /* Reason code 1 means machine check rendezous*/ + /* Reason code 1 means machine check rendezvous*/ if ((val == DIE_INIT_MONARCH_ENTER || val == DIE_INIT_SLAVE_ENTER) && nd->sos->rv_rc == 1) return NOTIFY_DONE; diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index b4c239685d2..407b4587048 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -4,7 +4,7 @@ * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar * * This file contains the code used by various IRQ handling routines: - * asking for different IRQ's should be done through these routines + * asking for different IRQs should be done through these routines * instead of just grabbing them. Thus setups with different IRQ numbers * shouldn't result in any weird surprises, and installing new handlers * should be easier. @@ -12,7 +12,7 @@ * Copyright (C) Ashok Raj<ashok.raj@intel.com>, Intel Corporation 2004 * * 4/14/2004: Added code to handle cpu migration and do safe irq - * migration without lossing interrupts for iosapic + * migration without losing interrupts for iosapic * architecture. */ @@ -190,7 +190,7 @@ void fixup_irqs(void) } /* - * Phase 1: Locate irq's bound to this cpu and + * Phase 1: Locate IRQs bound to this cpu and * relocate them for cpu removal. */ migrate_irqs(); diff --git a/arch/ia64/kernel/irq_lsapic.c b/arch/ia64/kernel/irq_lsapic.c index c2f07beb175..e56a7a36aca 100644 --- a/arch/ia64/kernel/irq_lsapic.c +++ b/arch/ia64/kernel/irq_lsapic.c @@ -23,7 +23,7 @@ lsapic_noop_startup (unsigned int irq) static void lsapic_noop (unsigned int irq) { - /* nuthing to do... */ + /* nothing to do... */ } static int lsapic_retrigger(unsigned int irq) diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 72e593e9405..be81fe42d80 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -151,12 +151,12 @@ static uint __kprobes is_cmp_ctype_unc_inst(uint template, uint slot, cmp_inst.l = kprobe_inst; if ((cmp_inst.f.x2 == 0) || (cmp_inst.f.x2 == 1)) { - /* Integere compare - Register Register (A6 type)*/ + /* Integer compare - Register Register (A6 type)*/ if ((cmp_inst.f.tb == 0) && (cmp_inst.f.ta == 0) &&(cmp_inst.f.c == 1)) ctype_unc = 1; } else if ((cmp_inst.f.x2 == 2)||(cmp_inst.f.x2 == 3)) { - /* Integere compare - Immediate Register (A8 type)*/ + /* Integer compare - Immediate Register (A8 type)*/ if ((cmp_inst.f.ta == 0) &&(cmp_inst.f.c == 1)) ctype_unc = 1; } @@ -954,7 +954,7 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) /* * Callee owns the argument space and could overwrite it, eg * tail call optimization. So to be absolutely safe - * we save the argument space before transfering the control + * we save the argument space before transferring the control * to instrumented jprobe function which runs in * the process context */ diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index 70b8bdbb7e6..aba813c2c15 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -438,7 +438,7 @@ is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci, * @peidx: pointer of index of processor error section * * Return value: - * target address on Success / 0 on Failue + * target address on Success / 0 on Failure */ static u64 get_target_identifier(peidx_table_t *peidx) @@ -701,7 +701,7 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, return fatal_mca("External bus check fatal status"); /* - * This is a local MCA and estimated as a recoverble error. + * This is a local MCA and estimated as a recoverable error. */ if (platform) return recover_from_platform_error(slidx, peidx, pbci, sos); diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index 158e3c51bb7..196287928ba 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -861,7 +861,7 @@ apply_relocate (Elf64_Shdr *sechdrs, const char *strtab, unsigned int symindex, /* * Modules contain a single unwind table which covers both the core and the init text * sections but since the two are not contiguous, we need to split this table up such that - * we can register (and unregister) each "segment" seperately. Fortunately, this sounds + * we can register (and unregister) each "segment" separately. Fortunately, this sounds * more complicated than it really is. */ static void diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index e7191ca30b1..b7133cabdbe 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -1318,7 +1318,7 @@ pfm_reserve_session(struct task_struct *task, int is_syswide, unsigned int cpu) { unsigned long flags; /* - * validy checks on cpu_mask have been done upstream + * validity checks on cpu_mask have been done upstream */ LOCK_PFS(flags); @@ -1384,7 +1384,7 @@ pfm_unreserve_session(pfm_context_t *ctx, int is_syswide, unsigned int cpu) { unsigned long flags; /* - * validy checks on cpu_mask have been done upstream + * validity checks on cpu_mask have been done upstream */ LOCK_PFS(flags); @@ -1835,7 +1835,7 @@ pfm_flush(struct file *filp, fl_owner_t id) /* * remove our file from the async queue, if we use this mode. * This can be done without the context being protected. We come - * here when the context has become unreacheable by other tasks. + * here when the context has become unreachable by other tasks. * * We may still have active monitoring at this point and we may * end up in pfm_overflow_handler(). However, fasync_helper() @@ -2132,7 +2132,7 @@ doit: filp->private_data = NULL; /* - * if we free on the spot, the context is now completely unreacheable + * if we free on the spot, the context is now completely unreachable * from the callers side. The monitored task side is also cut, so we * can freely cut. * @@ -2562,7 +2562,7 @@ pfm_reset_pmu_state(pfm_context_t *ctx) ctx->ctx_all_pmcs[0] = pmu_conf->impl_pmcs[0] & ~0x1; /* - * bitmask of all PMDs that are accesible to this context + * bitmask of all PMDs that are accessible to this context */ ctx->ctx_all_pmds[0] = pmu_conf->impl_pmds[0]; @@ -3395,7 +3395,7 @@ pfm_read_pmds(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) if (unlikely(!PMD_IS_IMPL(cnum))) goto error; /* * we can only read the register that we use. That includes - * the one we explicitely initialize AND the one we want included + * the one we explicitly initialize AND the one we want included * in the sampling buffer (smpl_regs). * * Having this restriction allows optimization in the ctxsw routine @@ -3715,7 +3715,7 @@ pfm_restart(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) * if non-blocking, then we ensure that the task will go into * pfm_handle_work() before returning to user mode. * - * We cannot explicitely reset another task, it MUST always + * We cannot explicitly reset another task, it MUST always * be done by the task itself. This works for system wide because * the tool that is controlling the session is logically doing * "self-monitoring". @@ -4644,7 +4644,7 @@ pfm_exit_thread(struct task_struct *task) switch(state) { case PFM_CTX_UNLOADED: /* - * only comes to thios function if pfm_context is not NULL, i.e., cannot + * only comes to this function if pfm_context is not NULL, i.e., cannot * be in unloaded state */ printk(KERN_ERR "perfmon: pfm_exit_thread [%d] ctx unloaded\n", task->pid); @@ -5247,7 +5247,7 @@ pfm_end_notify_user(pfm_context_t *ctx) /* * main overflow processing routine. - * it can be called from the interrupt path or explicitely during the context switch code + * it can be called from the interrupt path or explicitly during the context switch code */ static void pfm_overflow_handler(struct task_struct *task, pfm_context_t *ctx, u64 pmc0, struct pt_regs *regs) diff --git a/arch/ia64/kernel/perfmon_mckinley.h b/arch/ia64/kernel/perfmon_mckinley.h index 9becccda289..c4bec7a9d18 100644 --- a/arch/ia64/kernel/perfmon_mckinley.h +++ b/arch/ia64/kernel/perfmon_mckinley.h @@ -181,7 +181,7 @@ static pmu_config_t pmu_conf_mck={ .pmc_desc = pfm_mck_pmc_desc, .num_ibrs = 8, .num_dbrs = 8, - .use_rr_dbregs = 1 /* debug register are use for range retrictions */ + .use_rr_dbregs = 1 /* debug register are use for range restrictions */ }; diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c index 37c876f95db..27c2ef445a5 100644 --- a/arch/ia64/kernel/sal.c +++ b/arch/ia64/kernel/sal.c @@ -134,7 +134,7 @@ set_smp_redirect (int flag) * interrupt redirection. The reason is this would require that * All interrupts be stopped and hard bind the irq to a cpu. * Later when the interrupt is fired we need to set the redir hint - * on again in the vector. This is combersome for something that the + * on again in the vector. This is cumbersome for something that the * user mode irq balancer will solve anyways. */ no_int_routing=1; diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index 89f6b138a62..25cd75f50ab 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -162,7 +162,7 @@ static DEFINE_SPINLOCK(data_saved_lock); /** salinfo_platform_oemdata - optional callback to decode oemdata from an error * record. * @sect_header: pointer to the start of the section to decode. - * @oemdata: returns vmalloc area containing the decded output. + * @oemdata: returns vmalloc area containing the decoded output. * @oemdata_size: returns length of decoded output (strlen). * * Description: If user space asks for oem data to be decoded by the kernel diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 9df1efe7487..eaa6a24bc0b 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -576,7 +576,7 @@ setup_arch (char **cmdline_p) } /* - * Display cpu info for all cpu's. + * Display cpu info for all CPUs. */ static int show_cpuinfo (struct seq_file *m, void *v) @@ -761,7 +761,7 @@ identify_cpu (struct cpuinfo_ia64 *c) c->cpu = smp_processor_id(); /* below default values will be overwritten by identify_siblings() - * for Multi-Threading/Multi-Core capable cpu's + * for Multi-Threading/Multi-Core capable CPUs */ c->threads_per_core = c->cores_per_socket = c->num_log = 1; c->socket_id = -1; @@ -947,7 +947,7 @@ cpu_init (void) ia32_cpu_init(); #endif - /* Clear ITC to eliminiate sched_clock() overflows in human time. */ + /* Clear ITC to eliminate sched_clock() overflows in human time. */ ia64_set_itc(0); /* disable all local interrupt sources: */ diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index 221de380456..b3a47f986e1 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -186,7 +186,7 @@ handle_IPI (int irq, void *dev_id) } /* - * Called with preeemption disabled. + * Called with preemption disabled. */ static inline void send_IPI_single (int dest_cpu, int op) @@ -196,7 +196,7 @@ send_IPI_single (int dest_cpu, int op) } /* - * Called with preeemption disabled. + * Called with preemption disabled. */ static inline void send_IPI_allbutself (int op) @@ -210,7 +210,7 @@ send_IPI_allbutself (int op) } /* - * Called with preeemption disabled. + * Called with preemption disabled. */ static inline void send_IPI_all (int op) @@ -223,7 +223,7 @@ send_IPI_all (int op) } /* - * Called with preeemption disabled. + * Called with preemption disabled. */ static inline void send_IPI_self (int op) @@ -252,7 +252,7 @@ kdump_smp_send_init(void) } #endif /* - * Called with preeemption disabled. + * Called with preemption disabled. */ void smp_send_reschedule (int cpu) @@ -261,7 +261,7 @@ smp_send_reschedule (int cpu) } /* - * Called with preeemption disabled. + * Called with preemption disabled. */ static void smp_send_local_flush_tlb (int cpu) diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index a44792d0f3a..542958079f1 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -694,7 +694,7 @@ int migrate_platform_irqs(unsigned int cpu) set_cpei_target_cpu(new_cpei_cpu); desc = irq_desc + ia64_cpe_irq; /* - * Switch for now, immediatly, we need to do fake intr + * Switch for now, immediately, we need to do fake intr * as other interrupts, but need to study CPEI behaviour with * polling before making changes. */ @@ -840,7 +840,7 @@ __cpu_up (unsigned int cpu) } /* - * Assume that CPU's have been discovered by some platform-dependent interface. For + * Assume that CPUs have been discovered by some platform-dependent interface. For * SoftSDV/Lion, that would be ACPI. * * Setup of the IPI irq handler is done in irq.c:init_IRQ_SMP(). @@ -854,7 +854,7 @@ init_smp_config(void) } *ap_startup; long sal_ret; - /* Tell SAL where to drop the AP's. */ + /* Tell SAL where to drop the APs. */ ap_startup = (struct fptr *) start_ap; sal_ret = ia64_sal_set_vectors(SAL_VECTOR_OS_BOOT_RENDEZ, ia64_tpa(ap_startup->fp), ia64_tpa(ap_startup->gp), 0, 0, 0, 0); diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index a06667c7acc..bf7e7b5c924 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -216,7 +216,7 @@ ia64_init_itm (void) #ifdef CONFIG_SMP /* On IA64 in an SMP configuration ITCs are never accurately synchronized. * Jitter compensation requires a cmpxchg which may limit - * the scalability of the syscalls for retrieving time. + * the scalibility of the syscalls for retrieving time. * The ITC synchronization is usually successful to within a few * ITC ticks but this is not a sure thing. If you need to improve * timer performance in SMP situations then boot the kernel with the diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index b8e0d70bf98..15ad85da15a 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -304,7 +304,7 @@ handle_fpu_swa (int fp_fault, struct pt_regs *regs, unsigned long isr) * Lower 4 bits are used as a count. Upper bits are a sequence * number that is updated when count is reset. The cmpxchg will * fail is seqno has changed. This minimizes mutiple cpus - * reseting the count. + * resetting the count. */ if (current_jiffies > last.time) (void) cmpxchg_acq(&last.count, count, 16 + (count & ~15)); diff --git a/arch/ia64/kernel/unwind.c b/arch/ia64/kernel/unwind.c index fe1426266b9..7d3dd6cdafa 100644 --- a/arch/ia64/kernel/unwind.c +++ b/arch/ia64/kernel/unwind.c @@ -2,7 +2,7 @@ * Copyright (C) 1999-2004 Hewlett-Packard Co * David Mosberger-Tang <davidm@hpl.hp.com> * Copyright (C) 2003 Fenghua Yu <fenghua.yu@intel.com> - * - Change pt_regs_off() to make it less dependant on pt_regs structure. + * - Change pt_regs_off() to make it less dependent on pt_regs structure. */ /* * This file implements call frame unwind support for the Linux diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 38085ac1833..0dbf0e81f8c 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -317,7 +317,7 @@ static void __meminit scatter_node_data(void) * node_online_map is not set for hot-added nodes at this time, * because we are halfway through initialization of the new node's * structures. If for_each_online_node() is used, a new node's - * pg_data_ptrs will be not initialized. Insted of using it, + * pg_data_ptrs will be not initialized. Instead of using it, * pgdat_list[] is checked. */ for_each_node(node) { diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c index ff1c5560117..b362d6d6a8c 100644 --- a/arch/ia64/sn/kernel/bte.c +++ b/arch/ia64/sn/kernel/bte.c @@ -63,7 +63,7 @@ static inline void bte_start_transfer(struct bteinfo_s *bte, u64 len, u64 mode) * Use the block transfer engine to move kernel memory from src to dest * using the assigned mode. * - * Paramaters: + * Parameters: * src - physical address of the transfer source. * dest - physical address of the transfer destination. * len - number of bytes to transfer from source to dest. @@ -247,7 +247,7 @@ EXPORT_SYMBOL(bte_copy); * use the block transfer engine to move kernel * memory from src to dest using the assigned mode. * - * Paramaters: + * Parameters: * src - physical address of the transfer source. * dest - physical address of the transfer destination. * len - number of bytes to transfer from source to dest. @@ -255,7 +255,7 @@ EXPORT_SYMBOL(bte_copy); * for IBCT0/1 in the SGI documentation. * * NOTE: If the source, dest, and len are all cache line aligned, - * then it would be _FAR_ preferrable to use bte_copy instead. + * then it would be _FAR_ preferable to use bte_copy instead. */ bte_result_t bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode) { @@ -300,7 +300,7 @@ bte_result_t bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode) * a standard bte copy. * * One nasty exception to the above rule is when the - * source and destination are not symetrically + * source and destination are not symmetrically * mis-aligned. If the source offset from the first * cache line is different from the destination offset, * we make the first section be the entire transfer @@ -337,7 +337,7 @@ bte_result_t bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode) if (footBcopyDest == (headBcopyDest + headBcopyLen)) { /* - * We have two contigous bcopy + * We have two contiguous bcopy * blocks. Merge them. */ headBcopyLen += footBcopyLen; @@ -375,7 +375,7 @@ bte_result_t bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode) } else { /* - * The transfer is not symetric, we will + * The transfer is not symmetric, we will * allocate a buffer large enough for all the * data, bte_copy into that buffer and then * bcopy to the destination. diff --git a/arch/ia64/sn/kernel/bte_error.c b/arch/ia64/sn/kernel/bte_error.c index b6fcf8164f2..27c5936ccfe 100644 --- a/arch/ia64/sn/kernel/bte_error.c +++ b/arch/ia64/sn/kernel/bte_error.c @@ -105,7 +105,7 @@ int shub1_bte_error_handler(unsigned long _nodepda) } BTE_PRINTK(("eh:%p:%d Cleaning up\n", err_nodepda, smp_processor_id())); - /* Reenable both bte interfaces */ + /* Re-enable both bte interfaces */ imem.ii_imem_regval = REMOTE_HUB_L(nasid, IIO_IMEM); imem.ii_imem_fld_s.i_b0_esd = imem.ii_imem_fld_s.i_b1_esd = 1; REMOTE_HUB_S(nasid, IIO_IMEM, imem.ii_imem_regval); @@ -243,7 +243,7 @@ bte_crb_error_handler(cnodeid_t cnode, int btenum, /* * The caller has already figured out the error type, we save that - * in the bte handle structure for the thread excercising the + * in the bte handle structure for the thread exercising the * interface to consume. */ bte->bh_error = ioe->ie_errortype + BTEFAIL_OFFSET; diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c index 7ed72d3faf7..787ed642dd4 100644 --- a/arch/ia64/sn/kernel/io_common.c +++ b/arch/ia64/sn/kernel/io_common.c @@ -479,7 +479,7 @@ sn_io_early_init(void) } /* - * prime sn_pci_provider[]. Individial provider init routines will + * prime sn_pci_provider[]. Individual provider init routines will * override their respective default entries. */ diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index a9bed5ca2ed..a574fcd163d 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -167,7 +167,7 @@ void __init early_sn_setup(void) * IO on SN2 is done via SAL calls, early_printk won't work without this. * * This code duplicates some of the ACPI table parsing that is in efi.c & sal.c. - * Any changes to those file may have to be made hereas well. + * Any changes to those file may have to be made here as well. */ efi_systab = (efi_system_table_t *) __va(ia64_boot_param->efi_systab); config_tables = __va(efi_systab->tables); diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 5d318b579fb..033c8a9f000 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -104,7 +104,7 @@ static inline unsigned long wait_piowc(void) * * SN2 PIO writes from separate CPUs are not guaranteed to arrive in order. * Context switching user threads which have memory-mapped MMIO may cause - * PIOs to issue from seperate CPUs, thus the PIO writes must be drained + * PIOs to issue from separate CPUs, thus the PIO writes must be drained * from the previous CPU's Shub before execution resumes on the new CPU. */ void sn_migrate(struct task_struct *task) diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c index c08db9c2375..44ccc0d789c 100644 --- a/arch/ia64/sn/kernel/xpc_channel.c +++ b/arch/ia64/sn/kernel/xpc_channel.c @@ -293,7 +293,7 @@ xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst, /* - * Pull the remote per partititon specific variables from the specified + * Pull the remote per partition specific variables from the specified * partition. */ enum xpc_retval @@ -461,7 +461,7 @@ xpc_allocate_local_msgqueue(struct xpc_channel *ch) // >>> may want to check for ch->flags & XPC_C_DISCONNECTING between // >>> iterations of the for-loop, bail if set? - // >>> should we impose a minumum #of entries? like 4 or 8? + // >>> should we impose a minimum #of entries? like 4 or 8? for (nentries = ch->local_nentries; nentries > 0; nentries--) { nbytes = nentries * ch->msg_size; @@ -514,7 +514,7 @@ xpc_allocate_remote_msgqueue(struct xpc_channel *ch) // >>> may want to check for ch->flags & XPC_C_DISCONNECTING between // >>> iterations of the for-loop, bail if set? - // >>> should we impose a minumum #of entries? like 4 or 8? + // >>> should we impose a minimum #of entries? like 4 or 8? for (nentries = ch->remote_nentries; nentries > 0; nentries--) { nbytes = nentries * ch->msg_size; @@ -1478,7 +1478,7 @@ xpc_teardown_infrastructure(struct xpc_partition *part) /* - * Before proceding with the teardown we have to wait until all + * Before proceeding with the teardown we have to wait until all * existing references cease. */ wait_event(part->teardown_wq, (atomic_read(&part->references) == 0)); diff --git a/arch/ia64/sn/kernel/xpnet.c b/arch/ia64/sn/kernel/xpnet.c index da721353097..e58fcadff2e 100644 --- a/arch/ia64/sn/kernel/xpnet.c +++ b/arch/ia64/sn/kernel/xpnet.c @@ -531,7 +531,7 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp); /* - * If we wanted to allow promiscous mode to work like an + * If we wanted to allow promiscuous mode to work like an * unswitched network, this would be a good point to OR in a * mask of partitions which should be receiving all packets. */ diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index 7a291a27151..d79ddacfba2 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -333,7 +333,7 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size) /* * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work * around hw issues at the pci bus level. SGI proms older than - * 4.10 don't implment this. + * 4.10 don't implement this. */ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, @@ -348,7 +348,7 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size) /* * If the above failed, retry using the SAL_PROBE call which should * be present in all proms (but which cannot work round PCI chipset - * bugs). This code is retained for compatability with old + * bugs). This code is retained for compatibility with old * pre-4.10 proms, and should be removed at some point in the future. */ @@ -379,7 +379,7 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) /* * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work * around hw issues at the pci bus level. SGI proms older than - * 4.10 don't implment this. + * 4.10 don't implement this. */ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, @@ -394,7 +394,7 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) /* * If the above failed, retry using the SAL_PROBE call which should * be present in all proms (but which cannot work round PCI chipset - * bugs). This code is retained for compatability with old + * bugs). This code is retained for compatibility with old * pre-4.10 proms, and should be removed at some point in the future. */ diff --git a/arch/ia64/sn/pci/pcibr/pcibr_ate.c b/arch/ia64/sn/pci/pcibr/pcibr_ate.c index 935029fc400..239b3cedcf2 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_ate.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_ate.c @@ -30,7 +30,7 @@ static void mark_ate(struct ate_resource *ate_resource, int start, int number, /* * find_free_ate: Find the first free ate index starting from the given - * index for the desired consequtive count. + * index for the desired consecutive count. */ static int find_free_ate(struct ate_resource *ate_resource, int start, int count) @@ -88,7 +88,7 @@ static inline int alloc_ate_resource(struct ate_resource *ate_resource, return -1; /* - * Find the required number of free consequtive ates. + * Find the required number of free consecutive ates. */ start_index = find_free_ate(ate_resource, ate_resource->lowest_free_index, @@ -105,7 +105,7 @@ static inline int alloc_ate_resource(struct ate_resource *ate_resource, /* * Allocate "count" contiguous Bridge Address Translation Entries * on the specified bridge to be used for PCI to XTALK mappings. - * Indices in rm map range from 1..num_entries. Indicies returned + * Indices in rm map range from 1..num_entries. Indices returned * to caller range from 0..num_entries-1. * * Return the start index on success, -1 on failure. diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c index 95af40cb22f..e626e50a938 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -201,7 +201,7 @@ pcibr_dmatrans_direct32(struct pcidev_info * info, } /* - * Wrapper routine for free'ing DMA maps + * Wrapper routine for freeing DMA maps * DMA mappings for Direct 64 and 32 do not have any DMA maps. */ void diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index 8a2cb4e691f..b9bedbd6e1d 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -223,7 +223,7 @@ tioca_fastwrite_enable(struct tioca_kernel *tioca_kern) /* * Scan all vga controllers on this bus making sure they all - * suport FW. If not, return. + * support FW. If not, return. */ list_for_each_entry(pdev, tioca_kern->ca_devices, bus_list) { @@ -364,7 +364,7 @@ tioca_dma_d48(struct pci_dev *pdev, u64 paddr) * @req_size: len (bytes) to map * * Map @paddr into CA address space using the GART mechanism. The mapped - * dma_addr_t is guarenteed to be contiguous in CA bus space. + * dma_addr_t is guaranteed to be contiguous in CA bus space. */ static dma_addr_t tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size) @@ -526,7 +526,7 @@ tioca_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags) return 0; /* - * If card is 64 or 48 bit addresable, use a direct mapping. 32 + * If card is 64 or 48 bit addressable, use a direct mapping. 32 * bit direct is so restrictive w.r.t. where the memory resides that * we don't use it even though CA has some support. */ diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 35f854fb612..f4c0b961a93 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -256,9 +256,9 @@ pcidev_to_tioce(struct pci_dev *pdev, struct tioce __iomem **base, * @ct_addr: the coretalk address to map * @len: number of bytes to map * - * Given the addressing type, set up various paramaters that define the + * Given the addressing type, set up various parameters that define the * ATE pool to use. Search for a contiguous block of entries to cover the - * length, and if enough resources exist, fill in the ATE's and construct a + * length, and if enough resources exist, fill in the ATEs and construct a * tioce_dmamap struct to track the mapping. */ static u64 @@ -581,8 +581,8 @@ tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count, */ if (!mapaddr && !barrier && dma_mask >= 0xffffffffffUL) { /* - * We have two options for 40-bit mappings: 16GB "super" ATE's - * and 64MB "regular" ATE's. We'll try both if needed for a + * We have two options for 40-bit mappings: 16GB "super" ATEs + * and 64MB "regular" ATEs. We'll try both if needed for a * given mapping but which one we try first depends on the * size. For requests >64MB, prefer to use a super page with * regular as the fallback. Otherwise, try in the reverse order. @@ -687,8 +687,8 @@ tioce_error_intr_handler(int irq, void *arg) } /** - * tioce_reserve_m32 - reserve M32 ate's for the indicated address range - * @tioce_kernel: TIOCE context to reserve ate's for + * tioce_reserve_m32 - reserve M32 ATEs for the indicated address range + * @tioce_kernel: TIOCE context to reserve ATEs for * @base: starting bus address to reserve * @limit: last bus address to reserve * @@ -763,7 +763,7 @@ tioce_kern_init(struct tioce_common *tioce_common) /* * Set PMU pagesize to the largest size available, and zero out - * the ate's. + * the ATEs. */ tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base; @@ -784,7 +784,7 @@ tioce_kern_init(struct tioce_common *tioce_common) } /* - * Reserve ATE's corresponding to reserved address ranges. These + * Reserve ATEs corresponding to reserved address ranges. These * include: * * Memory space covered by each PPB mem base/limit register |