diff options
| -rw-r--r-- | drivers/video/Kconfig | 43 |
1 files changed, 25 insertions, 18 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index b218ac5e611..e63e5648e0a 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -254,16 +254,24 @@ config FB_PM2 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help - This is the frame buffer device driver for the Permedia2 AGP frame - buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a - product page at - <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>. + This is the frame buffer device driver for cards based on + the 3D Labs Permedia, Permedia 2 and Permedia 2V chips. + The driver was tested on the following cards: + Diamond FireGL 1000 PRO AGP + ELSA Gloria Synergy PCI + Appian Jeronimo PRO (both heads) PCI + 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI + Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC + ASK Graphic Blaster Exxtreme AGP + + To compile this driver as a module, choose M here: the + module will be called pm2fb. config FB_PM2_FIFO_DISCONNECT bool "enable FIFO disconnect feature" depends on FB_PM2 && PCI help - Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2). + Support the Permedia2 FIFO disconnect feature. config FB_ARMCLCD tristate "ARM PrimeCell PL110 support" @@ -1539,25 +1547,25 @@ config FB_KYRO module will be called kyrofb. config FB_3DFX - tristate "3Dfx Banshee/Voodoo3 display support" + tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support" depends on FB && PCI select FB_CFB_IMAGEBLIT select FB_CFB_FILLRECT select FB_CFB_COPYAREA help - This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 - chips. Say Y if you have such a graphics board. + This driver supports graphics boards with the 3Dfx Banshee, + Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have + such a graphics board. To compile this driver as a module, choose M here: the module will be called tdfxfb. config FB_3DFX_ACCEL - bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)" + bool "3Dfx Acceleration functions (EXPERIMENTAL)" depends on FB_3DFX && EXPERIMENTAL ---help--- - This will compile the 3Dfx Banshee/Voodoo3 frame buffer device - with acceleration functions. - + This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer + device driver with acceleration functions. config FB_VOODOO1 tristate "3Dfx Voodoo Graphics (sst1) support" @@ -1622,17 +1630,16 @@ config FB_TRIDENT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- - This driver is supposed to support graphics boards with the - Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops + This is the frame buffer device driver for Trident PCI/AGP chipsets. + Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D + and Blade XP. + There are also integrated versions of these chips called CyberXXXX, + CyberImage or CyberBlade. These chips are mostly found in laptops but also on some motherboards. For more information, read <file:Documentation/fb/tridentfb.txt> - Cyberblade/i1 support will be removed soon, use the cyblafb driver - instead. - Say Y if you have such a graphics board. - To compile this driver as a module, choose M here: the module will be called tridentfb. |