diff options
| -rw-r--r-- | include/net/cfg80211.h | 13 | ||||
| -rw-r--r-- | include/net/mac80211.h | 8 | ||||
| -rw-r--r-- | net/mac80211/cfg.c | 32 | ||||
| -rw-r--r-- | net/mac80211/debugfs_netdev.c | 22 | ||||
| -rw-r--r-- | net/mac80211/ieee80211_i.h | 4 | ||||
| -rw-r--r-- | net/mac80211/iface.c | 8 | ||||
| -rw-r--r-- | net/mac80211/rate.c | 63 | ||||
| -rw-r--r-- | net/mac80211/rate.h | 5 | ||||
| -rw-r--r-- | net/mac80211/tx.c | 12 | ||||
| -rw-r--r-- | net/wireless/wext-compat.c | 34 |
10 files changed, 122 insertions, 79 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index a8d5d04314b..22e062afb5a 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -857,20 +857,11 @@ enum tx_power_setting { * cfg80211_bitrate_mask - masks for bitrate control */ struct cfg80211_bitrate_mask { -/* - * As discussed in Berlin, this struct really - * should look like this: - struct { u32 legacy; - u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; + /* TODO: add support for masking MCS rates; e.g.: */ + /* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */ } control[IEEE80211_NUM_BANDS]; - - * Since we can always fix in-kernel users, let's keep - * it simpler for now: - */ - u32 fixed; /* fixed bitrate, 0 == not fixed */ - u32 maxrate; /* in kbps, 0 == no limit */ }; /** * struct cfg80211_pmksa - PMK Security Association diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 39c516c352b..7e5af6d90b9 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -255,9 +255,6 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be * set by rate control algorithms to indicate probe rate, will * be cleared for fragmented frames (except on the last fragment) - * @IEEE80211_TX_INTFL_RCALGO: mac80211 internal flag, do not test or - * set this flag in the driver; indicates that the rate control - * algorithm was used and should be notified of TX status * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211, * used to indicate that a pending frame requires TX processing before * it can be sent out. @@ -287,7 +284,6 @@ enum mac80211_tx_control_flags { IEEE80211_TX_STAT_AMPDU = BIT(10), IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11), IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), - IEEE80211_TX_INTFL_RCALGO = BIT(13), IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), IEEE80211_TX_INTFL_RETRIED = BIT(15), IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16), @@ -2297,6 +2293,9 @@ enum rate_control_changed { * @short_preamble: whether mac80211 will request short-preamble transmission * if the selected rate supports it * @max_rate_idx: user-requested maximum rate (not MCS for now) + * (deprecated; this will be removed once drivers get updated to use + * rate_idx_mask) + * @rate_idx_mask: user-requested rate mask (not MCS for now) * @skb: the skb that will be transmitted, the control information in it needs * to be filled in * @ap: whether this frame is sent out in AP mode @@ -2309,6 +2308,7 @@ struct ieee80211_tx_rate_control { struct ieee80211_tx_rate reported_rate; bool rts, short_preamble; u8 max_rate_idx; + u32 rate_idx_mask; bool ap; }; diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 976014c5e74..e5dda6fb8df 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1406,8 +1406,6 @@ static int ieee80211_set_bitrate_mask(struct wiphy *wiphy, struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); int i; - u32 target_rate; - struct ieee80211_supported_band *sband; /* * This _could_ be supported by providing a hook for @@ -1417,35 +1415,11 @@ static int ieee80211_set_bitrate_mask(struct wiphy *wiphy, if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) return -EOPNOTSUPP; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - - /* - * target_rate = -1, rate->fixed = 0 means auto only, so use all rates - * target_rate = X, rate->fixed = 1 means only rate X - * target_rate = X, rate->fixed = 0 means all rates <= X - */ - sdata->max_ratectrl_rateidx = -1; - sdata->force_unicast_rateidx = -1; - if (mask->fixed) - target_rate = mask->fixed / 100; - else if (mask->maxrate) - target_rate = mask->maxrate / 100; - else - return 0; + for (i = 0; i < IEEE80211_NUM_BANDS; i++) + sdata->rc_rateidx_mask[i] = mask->control[i].legacy; - for (i = 0; i< sband->n_bitrates; i++) { - if (target_rate != sband->bitrates[i].bitrate) - continue; - - /* requested bitrate found */ - sdata->max_ratectrl_rateidx = i; - if (mask->fixed) - sdata->force_unicast_rateidx = i; - return 0; - } - - return -EINVAL; + return 0; } static int ieee80211_remain_on_channel(struct wiphy *wiphy, diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index 59f6e3bcbd0..1481049f0f7 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -127,8 +127,10 @@ __IEEE80211_IF_FILE(name, ieee80211_if_write_##name) /* common attributes */ IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC); -IEEE80211_IF_FILE(force_unicast_rateidx, force_unicast_rateidx, DEC); -IEEE80211_IF_FILE(max_ratectrl_rateidx, max_ratectrl_rateidx, DEC); +IEEE80211_IF_FILE(rc_rateidx_mask_2ghz, rc_rateidx_mask[IEEE80211_BAND_2GHZ], + HEX); +IEEE80211_IF_FILE(rc_rateidx_mask_5ghz, rc_rateidx_mask[IEEE80211_BAND_5GHZ], + HEX); /* STA attributes */ IEEE80211_IF_FILE(bssid, u.mgd.bssid, MAC); @@ -264,8 +266,8 @@ IEEE80211_IF_FILE(dot11MeshHWMPRootMode, static void add_sta_files(struct ieee80211_sub_if_data *sdata) { DEBUGFS_ADD(drop_unencrypted, sta); - DEBUGFS_ADD(force_unicast_rateidx, sta); - DEBUGFS_ADD(max_ratectrl_rateidx, sta); + DEBUGFS_ADD(rc_rateidx_mask_2ghz, sta); + DEBUGFS_ADD(rc_rateidx_mask_5ghz, sta); DEBUGFS_ADD(bssid, sta); DEBUGFS_ADD(aid, sta); @@ -275,8 +277,8 @@ static void add_sta_files(struct ieee80211_sub_if_data *sdata) static void add_ap_files(struct ieee80211_sub_if_data *sdata) { DEBUGFS_ADD(drop_unencrypted, ap); - DEBUGFS_ADD(force_unicast_rateidx, ap); - DEBUGFS_ADD(max_ratectrl_rateidx, ap); + DEBUGFS_ADD(rc_rateidx_mask_2ghz, ap); + DEBUGFS_ADD(rc_rateidx_mask_5ghz, ap); DEBUGFS_ADD(num_sta_ps, ap); DEBUGFS_ADD(dtim_count, ap); @@ -286,8 +288,8 @@ static void add_ap_files(struct ieee80211_sub_if_data *sdata) static void add_wds_files(struct ieee80211_sub_if_data *sdata) { DEBUGFS_ADD(drop_unencrypted, wds); - DEBUGFS_ADD(force_unicast_rateidx, wds); - DEBUGFS_ADD(max_ratectrl_rateidx, wds); + DEBUGFS_ADD(rc_rateidx_mask_2ghz, wds); + DEBUGFS_ADD(rc_rateidx_mask_5ghz, wds); DEBUGFS_ADD(peer, wds); } @@ -295,8 +297,8 @@ static void add_wds_files(struct ieee80211_sub_if_data *sdata) static void add_vlan_files(struct ieee80211_sub_if_data *sdata) { DEBUGFS_ADD(drop_unencrypted, vlan); - DEBUGFS_ADD(force_unicast_rateidx, vlan); - DEBUGFS_ADD(max_ratectrl_rateidx, vlan); + DEBUGFS_ADD(rc_rateidx_mask_2ghz, vlan); + DEBUGFS_ADD(rc_rateidx_mask_5ghz, vlan); } static void add_monitor_files(struct ieee80211_sub_if_data *sdata) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index a27921ee6e6..3e4ac3f3085 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -494,8 +494,8 @@ struct ieee80211_sub_if_data { */ struct ieee80211_if_ap *bss; - int force_unicast_rateidx; /* forced TX rateidx for unicast frames */ - int max_ratectrl_rateidx; /* max TX rateidx for rate control */ + /* bitmap of allowed (non-MCS) rate indexes for rate control */ + u32 rc_rateidx_mask[IEEE80211_NUM_BANDS]; union { struct ieee80211_if_ap ap; diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 264a6c975f8..fe140bf033f 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -856,8 +856,12 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, INIT_LIST_HEAD(&sdata->key_list); - sdata->force_unicast_rateidx = -1; - sdata->max_ratectrl_rateidx = -1; + for (i = 0; i < IEEE80211_NUM_BANDS; i++) { + struct ieee80211_supported_band *sband; + sband = local->hw.wiphy->bands[i]; + sdata->rc_rateidx_mask[i] = + sband ? (1 << sband->n_bitrates) - 1 : 0; + } /* setup type-dependent data */ ieee80211_setup_sdata(sdata, type); diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 6349e7f4dca..c74b7c85403 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -249,6 +249,38 @@ bool rate_control_send_low(struct ieee80211_sta *sta, } EXPORT_SYMBOL(rate_control_send_low); +static void rate_idx_match_mask(struct ieee80211_tx_rate *rate, + int n_bitrates, u32 mask) +{ + int j; + + /* See whether the selected rate or anything below it is allowed. */ + for (j = rate->idx; j >= 0; j--) { + if (mask & (1 << j)) { + /* Okay, found a suitable rate. Use it. */ + rate->idx = j; + return; + } + } + + /* Try to find a higher rate that would be allowed */ + for (j = rate->idx + 1; j < n_bitrates; j++) { + if (mask & (1 << j)) { + /* Okay, found a suitable rate. Use it. */ + rate->idx = j; + return; + } + } + + /* + * Uh.. No suitable rate exists. This should not really happen with + * sane TX rate mask configurations. However, should someone manage to + * configure supported rates and TX rate mask in incompatible way, + * allow the frame to be transmitted with whatever the rate control + * selected. + */ +} + void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_tx_rate_control *txrc) @@ -258,6 +290,7 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, struct ieee80211_sta *ista = NULL; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); int i; + u32 mask; if (sta) { ista = &sta->sta; @@ -270,23 +303,31 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, info->control.rates[i].count = 1; } - if (sta && sdata->force_unicast_rateidx > -1) { - info->control.rates[0].idx = sdata->force_unicast_rateidx; - } else { - ref->ops->get_rate(ref->priv, ista, priv_sta, txrc); - info->flags |= IEEE80211_TX_INTFL_RCALGO; - } + ref->ops->get_rate(ref->priv, ista, priv_sta, txrc); /* - * try to enforce the maximum rate the user wanted + * Try to enforce the rateidx mask the user wanted. skip this if the + * default mask (allow all rates) is used to save some processing for + * the common case. */ - if (sdata->max_ratectrl_rateidx > -1) + mask = sdata->rc_rateidx_mask[info->band]; + if (mask != (1 << txrc->sband->n_bitrates) - 1) { + if (sta) { + /* Filter out rates that the STA does not support */ + mask &= sta->sta.supp_rates[info->band]; + } + /* + * Make sure the rate index selected for each TX rate is + * included in the configured mask and change the rate indexes + * if needed. + */ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + /* Rate masking supports only legacy rates for now */ if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS) continue; - info->control.rates[i].idx = - min_t(s8, info->control.rates[i].idx, - sdata->max_ratectrl_rateidx); + rate_idx_match_mask(&info->control.rates[i], + txrc->sband->n_bitrates, mask); + } } BUG_ON(info->control.rates[0].idx < 0); diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h index cb9bd1f65e2..669dddd4052 100644 --- a/net/mac80211/rate.h +++ b/net/mac80211/rate.h @@ -44,10 +44,7 @@ static inline void rate_control_tx_status(struct ieee80211_local *local, struct rate_control_ref *ref = local->rate_ctrl; struct ieee80211_sta *ista = &sta->sta; void *priv_sta = sta->rate_ctrl_priv; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - - if (likely(info->flags & IEEE80211_TX_INTFL_RCALGO)) - ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb); + ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb); } diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 4961168f509..d3a44812f8b 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -519,7 +519,11 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) txrc.bss_conf = &tx->sdata->vif.bss_conf; txrc.skb = tx->skb; txrc.reported_rate.idx = -1; - txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx; + txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[tx->channel->band]; + if (txrc.rate_idx_mask == (1 << sband->n_bitrates) - 1) + txrc.max_rate_idx = -1; + else + txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1; txrc.ap = tx->sdata->vif.type == NL80211_IFTYPE_AP; /* set up RTS protection if desired */ @@ -2178,7 +2182,11 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, txrc.bss_conf = &sdata->vif.bss_conf; txrc.skb = skb; txrc.reported_rate.idx = -1; - txrc.max_rate_idx = sdata->max_ratectrl_rateidx; + txrc.rate_idx_mask = sdata->rc_rateidx_mask[band]; + if (txrc.rate_idx_mask == (1 << sband->n_bitrates) - 1) + txrc.max_rate_idx = -1; + else + txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1; txrc.ap = true; rate_control_get_rate(sdata, NULL, &txrc); diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index 4198243a3df..966d2f01bea 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -1204,21 +1204,47 @@ int cfg80211_wext_siwrate(struct net_device *dev, struct wireless_dev *wdev = dev->ieee80211_ptr; struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); struct cfg80211_bitrate_mask mask; + u32 fixed, maxrate; + struct ieee80211_supported_band *sband; + int band, ridx; + bool match = false; if (!rdev->ops->set_bitrate_mask) return -EOPNOTSUPP; - mask.fixed = 0; - mask.maxrate = 0; + memset(&mask, 0, sizeof(mask)); + fixed = 0; + maxrate = 0; if (rate->value < 0) { /* nothing */ } else if (rate->fixed) { - mask.fixed = rate->value / 1000; /* kbps */ + fixed = rate->value / 100000; } else { - mask.maxrate = rate->value / 1000; /* kbps */ + maxrate = rate->value / 100000; + } + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + sband = wdev->wiphy->bands[band]; + if (sband == NULL) + continue; + for (ridx = 0; ridx < sband->n_bitrates; ridx++) { + struct ieee80211_rate *srate = &sband->bitrates[ridx]; + if (fixed == srate->bitrate) { + mask.control[band].legacy = 1 << ridx; + match = true; + break; + } + if (srate->bitrate <= maxrate) { + mask.control[band].legacy |= 1 << ridx; + match = true; + } + } } + if (!match) + return -EINVAL; + return rdev->ops->set_bitrate_mask(wdev->wiphy, dev, NULL, &mask); } EXPORT_SYMBOL_GPL(cfg80211_wext_siwrate); |