Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "This update contains overall only driver-specific fixes.  Slightly
  large LOC are seen in usb-audio driver for a couple of new device
  quirks and cs42l71 ASoC driver for enhanced features.  The others are
  a few small (regression) fixes HD-audio, and yet other small / trival
  ASoC fixes."

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card:
  ALSA: HDA: Fix sound resume hang
  ALSA: hda - bug fix for invalid connection list of Haswell HDMI codec pins
  ALSA: hda - Fix the wrong pincaps set in ALC861VD dallas/hp fixup
  ALSA: hda - Set codec->single_adc_amp flag for Realtek codecs
  ASoC: atmel-ssc: change disable to disable in dts node
  ASoC: Prevent pop_wait overwrite
  ALSA: usb-audio: ignore-quirk for HP Wireless Audio
  ALSA: hda - Always turn on pins for HDMI/DP
  ALSA: hda - Fix pin configuration of HP Pavilion dv7
  ASoC: core: Fix splitting of log messages
  ASoC: cs42l73: Change VSPIN/VSPOUT to VSPINOUT
  ASoC: cs42l73: Add DAPM events for power down.
  ASoC: cs42l73: Add DMIC's as DAPM inputs.
  ASoC: sigmadsp: Fix endianness conversion issue
  ASoC: tpa6130a2: Use devm_* APIs

4 files changed, 219 insertions, 0 deletions

diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 34b9bb7fe87..c183d34842a 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -2181,6 +2181,10 @@ int snd_usbmidi_create(struct snd_card *card,
 		umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
 		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
 		break;
+	case QUIRK_MIDI_MBOX2:
+		umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops;
+		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
+		break;
 	case QUIRK_MIDI_RAW_BYTES:
 		umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
 		/*
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 49f9af995d7..cdcf6b45e8a 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -99,6 +99,42 @@
 },
 
 /*
+ * HP Wireless Audio
+ * When not ignored, causes instability issues for some users, forcing them to
+ * blacklist the entire module.
+ */
+{
+	USB_DEVICE(0x0424, 0xb832),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.vendor_name = "Standard Microsystems Corp.",
+		.product_name = "HP Wireless Audio",
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			/* Mixer */
+			{
+				.ifnum = 0,
+				.type = QUIRK_IGNORE_INTERFACE,
+			},
+			/* Playback */
+			{
+				.ifnum = 1,
+				.type = QUIRK_IGNORE_INTERFACE,
+			},
+			/* Capture */
+			{
+				.ifnum = 2,
+				.type = QUIRK_IGNORE_INTERFACE,
+			},
+			/* HID Device, .ifnum = 3 */
+			{
+				.ifnum = -1,
+			}
+		}
+	}
+},
+
+/*
  * Logitech QuickCam: bDeviceClass is vendor-specific, so generic interface
  * class matches do not take effect without an explicit ID match.
  */
@@ -2885,6 +2921,93 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 
 	}
 },
+
+/* DIGIDESIGN MBOX 2 */
+{
+	USB_DEVICE(0x0dba, 0x3000),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.vendor_name = "Digidesign",
+		.product_name = "Mbox 2",
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3BE,
+					.channels = 2,
+					.iface = 2,
+					.altsetting = 2,
+					.altset_idx = 1,
+					.attributes = 0x00,
+					.endpoint = 0x03,
+					.ep_attr = USB_ENDPOINT_SYNC_ASYNC,
+					.maxpacksize = 0x128,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) {
+						48000
+					}
+				}
+			},
+			{
+				.ifnum = 3,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 4,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+				.formats = SNDRV_PCM_FMTBIT_S24_3BE,
+					.channels = 2,
+					.iface = 4,
+					.altsetting = 2,
+					.altset_idx = 1,
+					.attributes = UAC_EP_CS_ATTR_SAMPLE_RATE,
+					.endpoint = 0x85,
+					.ep_attr = USB_ENDPOINT_SYNC_SYNC,
+					.maxpacksize = 0x128,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) {
+						48000
+					}
+				}
+			},
+			{
+				.ifnum = 5,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 6,
+				.type = QUIRK_MIDI_MBOX2,
+				.data = &(const struct snd_usb_midi_endpoint_info) {
+					.out_ep =  0x02,
+					.out_cables = 0x0001,
+					.in_ep = 0x81,
+					.in_interval = 0x01,
+					.in_cables = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 {
 	/* Tascam US122 MKII - playback-only support */
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 007fcecdf5c..f104c68fe1e 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -306,6 +306,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
 		[QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
 		[QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
 		[QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
+		[QUIRK_MIDI_MBOX2] = create_any_midi_quirk,
 		[QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
 		[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
 		[QUIRK_MIDI_CME] = create_any_midi_quirk,
@@ -497,6 +498,92 @@ static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
 	return -EAGAIN;
 }
 
+static void mbox2_setup_48_24_magic(struct usb_device *dev)
+{
+	u8 srate[3];
+	u8 temp[12];
+
+	/* Choose 48000Hz permanently */
+	srate[0] = 0x80;
+	srate[1] = 0xbb;
+	srate[2] = 0x00;
+
+	/* Send the magic! */
+	snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+		0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003);
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+		0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003);
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+		0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+		0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);
+	return;
+}
+
+/* Digidesign Mbox 2 needs to load firmware onboard
+ * and driver must wait a few seconds for initialisation.
+ */
+
+#define MBOX2_FIRMWARE_SIZE    646
+#define MBOX2_BOOT_LOADING     0x01 /* Hard coded into the device */
+#define MBOX2_BOOT_READY       0x02 /* Hard coded into the device */
+
+int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
+{
+	struct usb_host_config *config = dev->actconfig;
+	int err;
+	u8 bootresponse;
+	int fwsize;
+	int count;
+
+	fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
+
+	if (fwsize != MBOX2_FIRMWARE_SIZE) {
+		snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize);
+		return -ENODEV;
+	}
+
+	snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");
+
+	count = 0;
+	bootresponse = MBOX2_BOOT_LOADING;
+	while ((bootresponse == MBOX2_BOOT_LOADING) && (count < 10)) {
+		msleep(500); /* 0.5 second delay */
+		snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+			/* Control magic - load onboard firmware */
+			0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
+		if (bootresponse == MBOX2_BOOT_READY)
+			break;
+		snd_printd("usb-audio: device not ready, resending boot sequence...\n");
+		count++;
+	}
+
+	if (bootresponse != MBOX2_BOOT_READY) {
+		snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse);
+		return -ENODEV;
+	}
+
+	snd_printdd("usb-audio: device initialised!\n");
+
+	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
+		&dev->descriptor, sizeof(dev->descriptor));
+	config = dev->actconfig;
+	if (err < 0)
+		snd_printd("error usb_get_descriptor: %d\n", err);
+
+	err = usb_reset_configuration(dev);
+	if (err < 0)
+		snd_printd("error usb_reset_configuration: %d\n", err);
+	snd_printdd("mbox2_boot: new boot length = %d\n",
+		le16_to_cpu(get_cfg_desc(config)->wTotalLength));
+
+	mbox2_setup_48_24_magic(dev);
+
+	snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz");
+
+	return 0; /* Successful boot */
+}
+
 /*
  * Setup quirks
  */
@@ -655,6 +742,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
 	case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
 		return snd_usb_cm6206_boot_quirk(dev);
 
+	case USB_ID(0x0dba, 0x3000):
+		/* Digidesign Mbox 2 */
+		return snd_usb_mbox2_boot_quirk(dev);
+
 	case USB_ID(0x133e, 0x0815):
 		/* Access Music VirusTI Desktop */
 		return snd_usb_accessmusic_boot_quirk(dev);
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 1ac3fd9cc5a..a8172c11979 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -76,6 +76,7 @@ enum quirk_type {
 	QUIRK_MIDI_YAMAHA,
 	QUIRK_MIDI_MIDIMAN,
 	QUIRK_MIDI_NOVATION,
+	QUIRK_MIDI_MBOX2,
 	QUIRK_MIDI_RAW_BYTES,
 	QUIRK_MIDI_EMAGIC,
 	QUIRK_MIDI_CME,