Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull SPI changes for v3.4 from Grant Likely:
 "Mostly a bunch of new drivers and driver bug fixes; but this also
  includes a few patches that create a core message queue infrastructure
  for the spi subsystem instead of making each driver open code it."

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
  spi/fsl-espi: Make sure pm is within 2..32
  spi/fsl-espi: make the clock computation easier to read
  spi: sh-hspi: modify write/read method
  spi: sh-hspi: control spi clock more correctly
  spi: sh-hspi: convert to using core message queue
  spi: s3c64xx: Fix build
  spi: s3c64xx: remove unnecessary callback msg->complete
  spi: remove redundant variable assignment
  spi: release lock on error path in spi_pump_messages()
  spi: Compatibility with direction which is used in samsung DMA operation
  spi-topcliff-pch: add recovery processing in case wait-event timeout
  spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
  spi-topcliff-pch: Fix issue for transmitting over 4KByte
  spi-topcliff-pch: Modify pci-bus number dynamically to get DMA device info
  spi/imx: simplify error handling to free gpios
  spi: Convert to DEFINE_PCI_DEVICE_TABLE
  spi: add Broadcom BCM63xx SPI controller driver
  SPI: add CSR SiRFprimaII SPI controller driver
  spi-topcliff-pch: fix -Wuninitialized warning
  spi: Mark spi_register_board_info() __devinit
  ...

3 files changed, 78 insertions, 1 deletions

diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
index 572f637299c..3672f40f345 100644
--- a/include/linux/amba/pl022.h
+++ b/include/linux/amba/pl022.h
@@ -241,6 +241,8 @@ struct dma_chan;
  * @autosuspend_delay: delay in ms following transfer completion before the
  *     runtime power management system suspends the device. A setting of 0
  *     indicates no delay and the device will be suspended immediately.
+ * @rt: indicates the controller should run the message pump with realtime
+ *     priority to minimise the transfer latency on the bus.
  */
 struct pl022_ssp_controller {
 	u16 bus_id;
@@ -250,6 +252,7 @@ struct pl022_ssp_controller {
 	void *dma_rx_param;
 	void *dma_tx_param;
 	int autosuspend_delay;
+	bool rt;
 };
 
 /**
diff --git a/include/linux/spi/sh_hspi.h b/include/linux/spi/sh_hspi.h
new file mode 100644
index 00000000000..a1121f872ac
--- /dev/null
+++ b/include/linux/spi/sh_hspi.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2011 Kuninori Morimoto
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef SH_HSPI_H
+#define SH_HSPI_H
+
+struct sh_hspi_info {
+};
+
+#endif
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 176fce9cc6b..98679b061b6 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -22,6 +22,7 @@
 #include <linux/device.h>
 #include <linux/mod_devicetable.h>
 #include <linux/slab.h>
+#include <linux/kthread.h>
 
 /*
  * INTERFACES between SPI master-side drivers and SPI infrastructure.
@@ -235,6 +236,27 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *	the device whose settings are being modified.
  * @transfer: adds a message to the controller's transfer queue.
  * @cleanup: frees controller-specific state
+ * @queued: whether this master is providing an internal message queue
+ * @kworker: thread struct for message pump
+ * @kworker_task: pointer to task for message pump kworker thread
+ * @pump_messages: work struct for scheduling work to the message pump
+ * @queue_lock: spinlock to syncronise access to message queue
+ * @queue: message queue
+ * @cur_msg: the currently in-flight message
+ * @busy: message pump is busy
+ * @running: message pump is running
+ * @rt: whether this queue is set to run as a realtime task
+ * @prepare_transfer_hardware: a message will soon arrive from the queue
+ *	so the subsystem requests the driver to prepare the transfer hardware
+ *	by issuing this call
+ * @transfer_one_message: the subsystem calls the driver to transfer a single
+ *	message while queuing transfers that arrive in the meantime. When the
+ *	driver is finished with this message, it must call
+ *	spi_finalize_current_message() so the subsystem can issue the next
+ *	transfer
+ * @prepare_transfer_hardware: there are currently no more messages on the
+ *	queue so the subsystem notifies the driver that it may relax the
+ *	hardware by issuing this call
  *
  * Each SPI master controller can communicate with one or more @spi_device
  * children.  These make a small bus, sharing MOSI, MISO and SCK signals
@@ -318,6 +340,28 @@ struct spi_master {
 
 	/* called on release() to free memory provided by spi_master */
 	void			(*cleanup)(struct spi_device *spi);
+
+	/*
+	 * These hooks are for drivers that want to use the generic
+	 * master transfer queueing mechanism. If these are used, the
+	 * transfer() function above must NOT be specified by the driver.
+	 * Over time we expect SPI drivers to be phased over to this API.
+	 */
+	bool				queued;
+	struct kthread_worker		kworker;
+	struct task_struct		*kworker_task;
+	struct kthread_work		pump_messages;
+	spinlock_t			queue_lock;
+	struct list_head		queue;
+	struct spi_message		*cur_msg;
+	bool				busy;
+	bool				running;
+	bool				rt;
+
+	int (*prepare_transfer_hardware)(struct spi_master *master);
+	int (*transfer_one_message)(struct spi_master *master,
+				    struct spi_message *mesg);
+	int (*unprepare_transfer_hardware)(struct spi_master *master);
 };
 
 static inline void *spi_master_get_devdata(struct spi_master *master)
@@ -343,6 +387,13 @@ static inline void spi_master_put(struct spi_master *master)
 		put_device(&master->dev);
 }
 
+/* PM calls that need to be issued by the driver */
+extern int spi_master_suspend(struct spi_master *master);
+extern int spi_master_resume(struct spi_master *master);
+
+/* Calls the driver make to interact with the message queue */
+extern struct spi_message *spi_get_next_queued_message(struct spi_master *master);
+extern void spi_finalize_current_message(struct spi_master *master);
 
 /* the spi driver core manages memory for the spi_master classdev */
 extern struct spi_master *
@@ -549,7 +600,7 @@ static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags
 			+ ntrans * sizeof(struct spi_transfer),
 			flags);
 	if (m) {
-		int i;
+		unsigned i;
 		struct spi_transfer *t = (struct spi_transfer *)(m + 1);
 
 		INIT_LIST_HEAD(&m->transfers);