diff options
author | Eilon Greenstein <eilong@broadcom.com> | 2008-08-13 15:59:08 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2008-08-13 16:05:37 -0700 |
commit | 3347162995d23bc13f6f99c02ae89814babcaec2 (patch) | |
tree | 7354014426b77c424634355f63a2c4a8bfa31724 /drivers | |
parent | 3196a88a8593748bad24824ef5eb8e5aa99698c9 (diff) | |
download | linux-3.10-3347162995d23bc13f6f99c02ae89814babcaec2.tar.gz linux-3.10-3347162995d23bc13f6f99c02ae89814babcaec2.tar.bz2 linux-3.10-3347162995d23bc13f6f99c02ae89814babcaec2.zip |
bnx2x: Spelling mistakes
Spelling mistakes
Spelling has to L's in it...
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/bnx2x.h | 10 | ||||
-rw-r--r-- | drivers/net/bnx2x_hsi.h | 16 | ||||
-rw-r--r-- | drivers/net/bnx2x_init.h | 6 | ||||
-rw-r--r-- | drivers/net/bnx2x_link.h | 4 | ||||
-rw-r--r-- | drivers/net/bnx2x_main.c | 24 | ||||
-rw-r--r-- | drivers/net/bnx2x_reg.h | 18 |
6 files changed, 39 insertions, 39 deletions
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 80f5179d636..33437e5bcec 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -155,7 +155,7 @@ struct sw_rx_page { #define NUM_RX_SGE_PAGES 2 #define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge)) #define MAX_RX_SGE_CNT (RX_SGE_CNT - 2) -/* RX_SGE_CNT is promissed to be a power of 2 */ +/* RX_SGE_CNT is promised to be a power of 2 */ #define RX_SGE_MASK (RX_SGE_CNT - 1) #define NUM_RX_SGE (RX_SGE_CNT * NUM_RX_SGE_PAGES) #define MAX_RX_SGE (NUM_RX_SGE - 1) @@ -317,7 +317,7 @@ struct bnx2x_fastpath { #define RCQ_BD(x) ((x) & MAX_RCQ_BD) -/* This is needed for determening of last_max */ +/* This is needed for determining of last_max */ #define SUB_S16(a, b) (s16)((s16)(a) - (s16)(b)) #define __SGE_MASK_SET_BIT(el, bit) \ @@ -784,7 +784,7 @@ struct bnx2x { u8 stats_pending; u8 set_mac_pending; - /* End of fileds used in the performance code paths */ + /* End of fields used in the performance code paths */ int panic; int msglevel; @@ -1024,10 +1024,10 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, /* resolution of the rate shaping timer - 100 usec */ #define RS_PERIODIC_TIMEOUT_USEC 100 /* resolution of fairness algorithm in usecs - - coefficient for clauclating the actuall t fair */ + coefficient for calculating the actual t fair */ #define T_FAIR_COEF 10000000 /* number of bytes in single QM arbitration cycle - - coeffiecnt for calculating the fairness timer */ + coefficient for calculating the fairness timer */ #define QM_ARB_BYTES 40000 #define FAIR_MEM 2 diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h index d3e8198d7db..efd764427fa 100644 --- a/drivers/net/bnx2x_hsi.h +++ b/drivers/net/bnx2x_hsi.h @@ -1268,7 +1268,7 @@ struct doorbell { /* - * IGU driver acknowlegement register + * IGU driver acknowledgement register */ struct igu_ack_register { #if defined(__BIG_ENDIAN) @@ -1882,7 +1882,7 @@ struct timers_block_context { }; /* - * structure for easy accessability to assembler + * structure for easy accessibility to assembler */ struct eth_tx_bd_flags { u8 as_bitfield; @@ -2044,7 +2044,7 @@ struct eth_context { /* - * ethernet doorbell + * Ethernet doorbell */ struct eth_tx_doorbell { #if defined(__BIG_ENDIAN) @@ -2256,7 +2256,7 @@ struct ramrod_data { }; /* - * union for ramrod data for ethernet protocol (CQE) (force size of 16 bits) + * union for ramrod data for Ethernet protocol (CQE) (force size of 16 bits) */ union eth_ramrod_data { struct ramrod_data general; @@ -2330,7 +2330,7 @@ struct spe_hdr { }; /* - * ethernet slow path element + * Ethernet slow path element */ union eth_specific_data { u8 protocol_data[8]; @@ -2343,7 +2343,7 @@ union eth_specific_data { }; /* - * ethernet slow path element + * Ethernet slow path element */ struct eth_spe { struct spe_hdr hdr; @@ -2615,7 +2615,7 @@ struct tstorm_eth_rx_producers { /* - * common flag to indicate existance of TPA. + * common flag to indicate existence of TPA. */ struct tstorm_eth_tpa_exist { #if defined(__BIG_ENDIAN) @@ -2765,7 +2765,7 @@ struct tstorm_common_stats { }; /* - * Eth statistics query sturcture for the eth_stats_quesry ramrod + * Eth statistics query structure for the eth_stats_query ramrod */ struct eth_stats_query { struct xstorm_common_stats xstorm_common; diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index 4c7750789b6..f62891bf757 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -208,7 +208,7 @@ static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data, /********************************************************* There are different blobs for each PRAM section. In addition, each blob write operation is divided into a few operations - in order to decrease the amount of phys. contigious buffer needed. + in order to decrease the amount of phys. contiguous buffer needed. Thus, when we select a blob the address may be with some offset from the beginning of PRAM section. The same holds for the INT_TABLE sections. @@ -336,7 +336,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) len = op->str_wr.data_len; data = data_base + op->str_wr.data_off; - /* carefull! it must be in order */ + /* careful! it must be in order */ if (unlikely(op_type > OP_WB)) { /* If E1 only */ @@ -740,7 +740,7 @@ static u8 calc_crc8(u32 data, u8 crc) return crc_res; } -/* regiesers addresses are not in order +/* registers addresses are not in order so these arrays help simplify the code */ static const int cm_start[E1H_FUNC_MAX][9] = { {MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START, diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h index 80c945ca3a5..86d54a17b41 100644 --- a/drivers/net/bnx2x_link.h +++ b/drivers/net/bnx2x_link.h @@ -143,7 +143,7 @@ u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type, u8 phy_addr, u8 devad, u16 reg, u16 val); /* Reads the link_status from the shmem, - and update the link vars accordinaly */ + and update the link vars accordingly */ void bnx2x_link_status_update(struct link_params *input, struct link_vars *output); /* returns string representing the fw_version of the external phy */ @@ -152,7 +152,7 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, /* Set/Unset the led Basically, the CLC takes care of the led for the link, but in case one needs - to set/unset the led unnatually, set the "mode" to LED_MODE_OPER to + to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to blink the led, and LED_MODE_OFF to set the led off.*/ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed, u16 hw_led_mode, u32 chip_id); diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index d3c4c1ed07e..1bbcdb22d96 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -1151,8 +1151,8 @@ static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp) memset(fp->sge_mask, 0xff, (NUM_RX_SGE >> RX_SGE_MASK_ELEM_SHIFT)*sizeof(u64)); - /* Clear the two last indeces in the page to 1: - these are the indeces that correspond to the "next" element, + /* Clear the two last indices in the page to 1: + these are the indices that correspond to the "next" element, hence will never be indicated and should be removed from the calculations. */ bnx2x_clear_sge_mask_next_elems(fp); @@ -2011,7 +2011,7 @@ static u8 bnx2x_link_test(struct bnx2x *bp) sum of vn_min_rates or 0 - if all the min_rates are 0. - In the later case fainess algorithm should be deactivated. + In the later case fairness algorithm should be deactivated. If not all min_rates are zero then those that are zeroes will be set to 1. */ @@ -2134,7 +2134,7 @@ static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func, FUNC_MF_CFG_MIN_BW_SHIFT) * 100; /* If FAIRNESS is enabled (not all min rates are zeroes) and if current min rate is zero - set it to 1. - This is a requirment of the algorithm. */ + This is a requirement of the algorithm. */ if ((vn_min_rate == 0) && wsum) vn_min_rate = DEF_MIN_RATE; vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >> @@ -6562,7 +6562,7 @@ static void bnx2x_reset_port(struct bnx2x *bp) val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4); if (val) DP(NETIF_MSG_IFDOWN, - "BRB1 is not empty %d blooks are occupied\n", val); + "BRB1 is not empty %d blocks are occupied\n", val); /* TODO: Close Doorbell port? */ } @@ -6602,7 +6602,7 @@ static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code) } } -/* msut be called with rtnl_lock */ +/* must be called with rtnl_lock */ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) { int port = BP_PORT(bp); @@ -7455,7 +7455,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) if (BP_NOMCP(bp)) { /* only supposed to happen on emulation/FPGA */ - BNX2X_ERR("warning rendom MAC workaround active\n"); + BNX2X_ERR("warning random MAC workaround active\n"); random_ether_addr(bp->dev->dev_addr); memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN); } @@ -8907,7 +8907,7 @@ static void bnx2x_self_test(struct net_device *dev, if (!netif_running(dev)) return; - /* offline tests are not suppoerted in MF mode */ + /* offline tests are not supported in MF mode */ if (IS_E1HMF(bp)) etest->flags &= ~ETH_TEST_FL_OFFLINE; @@ -9216,7 +9216,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) PCI_PM_CTRL_PME_STATUS)); if (pmcsr & PCI_PM_CTRL_STATE_MASK) - /* delay required during transition out of D3hot */ + /* delay required during transition out of D3hot */ msleep(20); break; @@ -9289,7 +9289,7 @@ poll_panic: /* we split the first BD into headers and data BDs - * to ease the pain of our fellow micocode engineers + * to ease the pain of our fellow microcode engineers * we use one mapping for both BDs * So far this has only been observed to happen * in Other Operating Systems(TM) @@ -9396,7 +9396,7 @@ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb, /* Check if LSO packet needs to be copied: 3 = 1 (for headers BD) + 2 (for PBD and last BD) */ int wnd_size = MAX_FETCH_BD - 3; - /* Number of widnows to check */ + /* Number of windows to check */ int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size; int wnd_idx = 0; int frag_idx = 0; @@ -9498,7 +9498,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr, ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type); - /* First, check if we need to linearaize the skb + /* First, check if we need to linearize the skb (due to FW restrictions) */ if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) { /* Statistics of linearization */ diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index 5029d1e466f..a67b0c358ae 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -6,7 +6,7 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * The registers description starts with the regsister Access type followed + * The registers description starts with the register Access type followed * by size in bits. For example [RW 32]. The access types are: * R - Read only * RC - Clear on read @@ -49,7 +49,7 @@ /* [RW 10] Write client 0: Assert pause threshold. */ #define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068 #define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c -/* [R 24] The number of full blocks occpied by port. */ +/* [R 24] The number of full blocks occupied by port. */ #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094 /* [RW 1] Reset the design by software. */ #define BRB1_REG_SOFT_RESET 0x600dc @@ -1412,13 +1412,13 @@ #define MISC_REG_GPIO 0xa490 /* [R 28] this field hold the last information that caused reserved attention. bits [19:0] - address; [22:20] function; [23] reserved; - [27:24] the master thatcaused the attention - according to the following + [27:24] the master that caused the attention - according to the following encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = dbu; 8 = dmae */ #define MISC_REG_GRC_RSV_ATTN 0xa3c0 /* [R 28] this field hold the last information that caused timeout attention. bits [19:0] - address; [22:20] function; [23] reserved; - [27:24] the master thatcaused the attention - according to the following + [27:24] the master that caused the attention - according to the following encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = dbu; 8 = dmae */ #define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4 @@ -2320,7 +2320,7 @@ /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k; -128k */ #define PXP2_REG_RQ_QM_P_SIZE 0x120050 -/* [RW 1] 1' indicates that the RBC has finished configurating the PSWRQ */ +/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */ #define PXP2_REG_RQ_RBC_DONE 0x1201b0 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B; 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ @@ -2428,7 +2428,7 @@ /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the buffer reaches this number has_payload will be asserted */ #define PXP2_REG_WR_DMAE_MPS 0x1205ec -/* [RW 10] if Number of entries in dmae fifo will be higer than this +/* [RW 10] if Number of entries in dmae fifo will be higher than this threshold then has_payload indication will be asserted; the default value should be equal to > write MBS size! */ #define PXP2_REG_WR_DMAE_TH 0x120368 @@ -2449,7 +2449,7 @@ /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the buffer reaches this number has_payload will be asserted */ #define PXP2_REG_WR_TSDM_MPS 0x1205d4 -/* [RW 10] if Number of entries in usdmdp fifo will be higer than this +/* [RW 10] if Number of entries in usdmdp fifo will be higher than this threshold then has_payload indication will be asserted; the default value should be equal to > write MBS size! */ #define PXP2_REG_WR_USDMDP_TH 0x120348 @@ -3316,12 +3316,12 @@ #define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 #define CFC_DEBUG1_REG_WRITE_AC (0x1<<4) #define CFC_DEBUG1_REG_WRITE_AC_SIZE 4 -/* [R 1] debug only: This bit indicates wheter indicates that external +/* [R 1] debug only: This bit indicates whether indicates that external buffer was wrapped (oldest data was thrown); Relevant only when ~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */ #define DBG_REG_WRAP_ON_EXT_BUFFER 0xc124 #define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE 1 -/* [R 1] debug only: This bit indicates wheter the internal buffer was +/* [R 1] debug only: This bit indicates whether the internal buffer was wrapped (oldest data was thrown) Relevant only when ~dbg_registers_debug_target=0 (internal buffer) */ #define DBG_REG_WRAP_ON_INT_BUFFER 0xc128 |