diff options
author | Marek Szyprowski <m.szyprowski@samsung.com> | 2009-05-19 07:33:55 +0200 |
---|---|---|
committer | Liam Girdwood <lrg@slimlogic.co.uk> | 2009-06-15 11:18:26 +0100 |
commit | 0cbdf7bce5b98807b946d1a96956f30dcae24a50 (patch) | |
tree | a13822c57cf0b2e7cce0ad5f01399e51d6a80534 /drivers | |
parent | 1909e2f658ee6ec5bcca62a5599f5653857cfe18 (diff) | |
download | linux-3.10-0cbdf7bce5b98807b946d1a96956f30dcae24a50.tar.gz linux-3.10-0cbdf7bce5b98807b946d1a96956f30dcae24a50.tar.bz2 linux-3.10-0cbdf7bce5b98807b946d1a96956f30dcae24a50.zip |
LP3971 PMIC regulator driver (updated and combined version)
This patch adds regulator drivers for National Semiconductors LP3971 PMIC.
This LP3971 PMIC controller has 3 DC/DC voltage converters and 5 low
drop-out (LDO) regulators. LP3971 PMIC controller uses I2C interface.
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/regulator/Kconfig | 7 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
-rw-r--r-- | drivers/regulator/lp3971.c | 562 |
3 files changed, 570 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 5bec17cf1d5..f4317798e47 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -110,4 +110,11 @@ config REGULATOR_PCF50633 Say Y here to support the voltage regulators and convertors on PCF50633 +config REGULATOR_LP3971 + tristate "National Semiconductors LP3971 PMIC regulator driver" + depends on I2C + help + Say Y here to support the voltage regulators and convertors + on National Semiconductors LP3971 PMIC + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index faf7bcc1af9..4d762c4cccf 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o +obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c new file mode 100644 index 00000000000..35abebea4ed --- /dev/null +++ b/drivers/regulator/lp3971.c @@ -0,0 +1,562 @@ +/* + * Regulator driver for National Semiconductors LP3971 PMIC chip + * + * Copyright (C) 2009 Samsung Electronics + * Author: Marek Szyprowski <m.szyprowski@samsung.com> + * + * Based on wm8350.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/bug.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/lp3971.h> + +struct lp3971 { + struct device *dev; + struct mutex io_lock; + struct i2c_client *i2c; + int num_regulators; + struct regulator_dev **rdev; +}; + +static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg); +static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val); + +#define LP3971_SYS_CONTROL1_REG 0x07 + +/* System control register 1 initial value, + bits 4 and 5 are EPROM programmable */ +#define SYS_CONTROL1_INIT_VAL 0x40 +#define SYS_CONTROL1_INIT_MASK 0xCF + +#define LP3971_BUCK_VOL_ENABLE_REG 0x10 +#define LP3971_BUCK_VOL_CHANGE_REG 0x20 + +/* Voltage control registers shift: + LP3971_BUCK1 -> 0 + LP3971_BUCK2 -> 4 + LP3971_BUCK3 -> 6 +*/ +#define BUCK_VOL_CHANGE_SHIFT(x) (((1 << x) & ~0x01) << 1) +#define BUCK_VOL_CHANGE_FLAG_GO 0x01 +#define BUCK_VOL_CHANGE_FLAG_TARGET 0x02 +#define BUCK_VOL_CHANGE_FLAG_MASK 0x03 + +#define LP3971_BUCK1_BASE 0x23 +#define LP3971_BUCK2_BASE 0x29 +#define LP3971_BUCK3_BASE 0x32 + +const static int buck_base_addr[] = { + LP3971_BUCK1_BASE, + LP3971_BUCK2_BASE, + LP3971_BUCK3_BASE, +}; + +#define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x]) +#define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1) + +const static int buck_voltage_map[] = { + 0, 800, 850, 900, 950, 1000, 1050, 1100, + 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500, + 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800, + 3000, 3300, +}; + +#define BUCK_TARGET_VOL_MASK 0x3f +#define BUCK_TARGET_VOL_MIN_IDX 0x01 +#define BUCK_TARGET_VOL_MAX_IDX 0x19 + +#define LP3971_BUCK_RAMP_REG(x) (buck_base_addr[x]+2) + +#define LP3971_LDO_ENABLE_REG 0x12 +#define LP3971_LDO_VOL_CONTR_BASE 0x39 + +/* Voltage control registers: + LP3971_LDO1 -> LP3971_LDO_VOL_CONTR_BASE + 0 + LP3971_LDO2 -> LP3971_LDO_VOL_CONTR_BASE + 0 + LP3971_LDO3 -> LP3971_LDO_VOL_CONTR_BASE + 1 + LP3971_LDO4 -> LP3971_LDO_VOL_CONTR_BASE + 1 + LP3971_LDO5 -> LP3971_LDO_VOL_CONTR_BASE + 2 +*/ +#define LP3971_LDO_VOL_CONTR_REG(x) (LP3971_LDO_VOL_CONTR_BASE + (x >> 1)) + +/* Voltage control registers shift: + LP3971_LDO1 -> 0, LP3971_LDO2 -> 4 + LP3971_LDO3 -> 0, LP3971_LDO4 -> 4 + LP3971_LDO5 -> 0 +*/ +#define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2) +#define LDO_VOL_CONTR_MASK 0x0f + +const static int ldo45_voltage_map[] = { + 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350, + 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300, +}; + +const static int ldo123_voltage_map[] = { + 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, + 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300, +}; + +const static int *ldo_voltage_map[] = { + ldo123_voltage_map, /* LDO1 */ + ldo123_voltage_map, /* LDO2 */ + ldo123_voltage_map, /* LDO3 */ + ldo45_voltage_map, /* LDO4 */ + ldo45_voltage_map, /* LDO5 */ +}; + +#define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)]) + +#define LDO_VOL_MIN_IDX 0x00 +#define LDO_VOL_MAX_IDX 0x0f + +static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index) +{ + int ldo = rdev_get_id(dev) - LP3971_LDO1; + return 1000 * LDO_VOL_VALUE_MAP(ldo)[index]; +} + +static int lp3971_ldo_is_enabled(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3971_LDO1; + u16 mask = 1 << (1 + ldo); + u16 val; + + val = lp3971_reg_read(lp3971, LP3971_LDO_ENABLE_REG); + return (val & mask) != 0; +} + +static int lp3971_ldo_enable(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3971_LDO1; + u16 mask = 1 << (1 + ldo); + + return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, mask); +} + +static int lp3971_ldo_disable(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3971_LDO1; + u16 mask = 1 << (1 + ldo); + + return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0); +} + +static int lp3971_ldo_get_voltage(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3971_LDO1; + u16 val, reg; + + reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo)); + val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK; + + return 1000 * LDO_VOL_VALUE_MAP(ldo)[val]; +} + +static int lp3971_ldo_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3971_LDO1; + int min_vol = min_uV / 1000, max_vol = max_uV / 1000; + const int *vol_map = LDO_VOL_VALUE_MAP(ldo); + u16 val; + + if (min_vol < vol_map[LDO_VOL_MIN_IDX] || + min_vol > vol_map[LDO_VOL_MAX_IDX]) + return -EINVAL; + + for (val = LDO_VOL_MIN_IDX; val <= LDO_VOL_MAX_IDX; val++) + if (vol_map[val] >= min_vol) + break; + + if (vol_map[val] > max_vol) + return -EINVAL; + + return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo), + LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo), val); +} + +static struct regulator_ops lp3971_ldo_ops = { + .list_voltage = lp3971_ldo_list_voltage, + .is_enabled = lp3971_ldo_is_enabled, + .enable = lp3971_ldo_enable, + .disable = lp3971_ldo_disable, + .get_voltage = lp3971_ldo_get_voltage, + .set_voltage = lp3971_ldo_set_voltage, +}; + +static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index) +{ + return 1000 * buck_voltage_map[index]; +} + +static int lp3971_dcdc_is_enabled(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3971_DCDC1; + u16 mask = 1 << (buck * 2); + u16 val; + + val = lp3971_reg_read(lp3971, LP3971_BUCK_VOL_ENABLE_REG); + return (val & mask) != 0; +} + +static int lp3971_dcdc_enable(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3971_DCDC1; + u16 mask = 1 << (buck * 2); + + return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, mask); +} + +static int lp3971_dcdc_disable(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3971_DCDC1; + u16 mask = 1 << (buck * 2); + + return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0); +} + +static int lp3971_dcdc_get_voltage(struct regulator_dev *dev) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3971_DCDC1; + u16 reg; + int val; + + reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck)); + reg &= BUCK_TARGET_VOL_MASK; + + if (reg <= BUCK_TARGET_VOL_MAX_IDX) + val = 1000 * buck_voltage_map[reg]; + else { + val = 0; + dev_warn(&dev->dev, "chip reported incorrect voltage value.\n"); + } + + return val; +} + +static int lp3971_dcdc_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct lp3971 *lp3971 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3971_DCDC1; + int min_vol = min_uV / 1000, max_vol = max_uV / 1000; + const int *vol_map = buck_voltage_map; + u16 val; + int ret; + + if (min_vol < vol_map[BUCK_TARGET_VOL_MIN_IDX] || + min_vol > vol_map[BUCK_TARGET_VOL_MAX_IDX]) + return -EINVAL; + + for (val = BUCK_TARGET_VOL_MIN_IDX; val <= BUCK_TARGET_VOL_MAX_IDX; + val++) + if (vol_map[val] >= min_vol) + break; + + if (vol_map[val] > max_vol) + return -EINVAL; + + ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck), + BUCK_TARGET_VOL_MASK, val); + if (ret) + return ret; + + ret = lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG, + BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck), + BUCK_VOL_CHANGE_FLAG_GO << BUCK_VOL_CHANGE_SHIFT(buck)); + if (ret) + return ret; + + return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG, + BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck), + 0 << BUCK_VOL_CHANGE_SHIFT(buck)); +} + +static struct regulator_ops lp3971_dcdc_ops = { + .list_voltage = lp3971_dcdc_list_voltage, + .is_enabled = lp3971_dcdc_is_enabled, + .enable = lp3971_dcdc_enable, + .disable = lp3971_dcdc_disable, + .get_voltage = lp3971_dcdc_get_voltage, + .set_voltage = lp3971_dcdc_set_voltage, +}; + +static struct regulator_desc regulators[] = { + { + .name = "LDO1", + .id = LP3971_LDO1, + .ops = &lp3971_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo123_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO2", + .id = LP3971_LDO2, + .ops = &lp3971_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo123_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO3", + .id = LP3971_LDO3, + .ops = &lp3971_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo123_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO4", + .id = LP3971_LDO4, + .ops = &lp3971_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo45_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO5", + .id = LP3971_LDO5, + .ops = &lp3971_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo45_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC1", + .id = LP3971_DCDC1, + .ops = &lp3971_dcdc_ops, + .n_voltages = ARRAY_SIZE(buck_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC2", + .id = LP3971_DCDC2, + .ops = &lp3971_dcdc_ops, + .n_voltages = ARRAY_SIZE(buck_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC3", + .id = LP3971_DCDC3, + .ops = &lp3971_dcdc_ops, + .n_voltages = ARRAY_SIZE(buck_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, +}; + +static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count, + u16 *dest) +{ + int ret; + + if (count != 1) + return -EIO; + ret = i2c_smbus_read_byte_data(i2c, reg); + if (ret < 0 || count != 1) + return -EIO; + + *dest = ret; + return 0; +} + +static int lp3971_i2c_write(struct i2c_client *i2c, char reg, int count, + const u16 *src) +{ + int ret; + + if (count != 1) + return -EIO; + ret = i2c_smbus_write_byte_data(i2c, reg, *src); + if (ret >= 0) + return 0; + + return ret; +} + +static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg) +{ + u16 val = 0; + + mutex_lock(&lp3971->io_lock); + + lp3971_i2c_read(lp3971->i2c, reg, 1, &val); + + dev_dbg(lp3971->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg, + (unsigned)val&0xff); + + mutex_unlock(&lp3971->io_lock); + + return val & 0xff; +} + +static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val) +{ + u16 tmp; + int ret; + + mutex_lock(&lp3971->io_lock); + + ret = lp3971_i2c_read(lp3971->i2c, reg, 1, &tmp); + tmp = (tmp & ~mask) | val; + if (ret == 0) { + ret = lp3971_i2c_write(lp3971->i2c, reg, 1, &tmp); + dev_dbg(lp3971->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg, + (unsigned)val&0xff); + } + mutex_unlock(&lp3971->io_lock); + + return ret; +} + +static int setup_regulators(struct lp3971 *lp3971, + struct lp3971_platform_data *pdata) +{ + int i, err; + int num_regulators = pdata->num_regulators; + lp3971->num_regulators = num_regulators; + lp3971->rdev = kzalloc(sizeof(struct regulator_dev *) * num_regulators, + GFP_KERNEL); + + /* Instantiate the regulators */ + for (i = 0; i < num_regulators; i++) { + int id = pdata->regulators[i].id; + lp3971->rdev[i] = regulator_register(®ulators[id], + lp3971->dev, pdata->regulators[i].initdata, lp3971); + + err = IS_ERR(lp3971->rdev[i]); + if (err) { + dev_err(lp3971->dev, "regulator init failed: %d\n", + err); + goto error; + } + } + + return 0; +error: + for (i = 0; i < num_regulators; i++) + if (lp3971->rdev[i]) + regulator_unregister(lp3971->rdev[i]); + kfree(lp3971->rdev); + lp3971->rdev = NULL; + return err; +} + +static int __devinit lp3971_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct lp3971 *lp3971; + struct lp3971_platform_data *pdata = i2c->dev.platform_data; + int ret; + u16 val; + + lp3971 = kzalloc(sizeof(struct lp3971), GFP_KERNEL); + if (lp3971 == NULL) { + ret = -ENOMEM; + goto err; + } + + lp3971->i2c = i2c; + lp3971->dev = &i2c->dev; + i2c_set_clientdata(i2c, lp3971); + + mutex_init(&lp3971->io_lock); + + /* Detect LP3971 */ + ret = lp3971_i2c_read(i2c, LP3971_SYS_CONTROL1_REG, 1, &val); + if (ret == 0 && (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) + ret = -ENODEV; + if (ret < 0) { + dev_err(&i2c->dev, "failed to detect device\n"); + goto err_detect; + } + + if (pdata) { + ret = setup_regulators(lp3971, pdata); + if (ret < 0) + goto err_detect; + } else + dev_warn(lp3971->dev, "No platform init data supplied\n"); + + return 0; + +err_detect: + i2c_set_clientdata(i2c, NULL); + kfree(lp3971); +err: + return ret; +} + +static int __devexit lp3971_i2c_remove(struct i2c_client *i2c) +{ + struct lp3971 *lp3971 = i2c_get_clientdata(i2c); + int i; + for (i = 0; i < lp3971->num_regulators; i++) + if (lp3971->rdev[i]) + regulator_unregister(lp3971->rdev[i]); + kfree(lp3971->rdev); + i2c_set_clientdata(i2c, NULL); + kfree(lp3971); + + return 0; +} + +static const struct i2c_device_id lp3971_i2c_id[] = { + { "lp3971", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lp3971_i2c_id); + +static struct i2c_driver lp3971_i2c_driver = { + .driver = { + .name = "LP3971", + .owner = THIS_MODULE, + }, + .probe = lp3971_i2c_probe, + .remove = lp3971_i2c_remove, + .id_table = lp3971_i2c_id, +}; + +static int __init lp3971_module_init(void) +{ + int ret = -ENODEV; + + ret = i2c_add_driver(&lp3971_i2c_driver); + if (ret != 0) + pr_err("Failed to register I2C driver: %d\n", ret); + + return ret; +} +module_init(lp3971_module_init); + +static void __exit lp3971_module_exit(void) +{ + i2c_del_driver(&lp3971_i2c_driver); +} +module_exit(lp3971_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Marek Szyprowski <m.szyprowski@samsung.com>"); +MODULE_DESCRIPTION("LP3971 PMIC driver"); |