diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-07-10 13:24:48 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-07-10 13:24:48 -0700 |
commit | 055c9fa8874fa7261eec7a268366565db84af474 (patch) | |
tree | abad18539e25866d9fb9ca358400f230897a886b /drivers | |
parent | 310959e831783d220d1fcaaca90e17c923830ed6 (diff) | |
parent | 46bada60961396b65d01480e2cadf4af03bc1632 (diff) | |
download | linux-3.10-055c9fa8874fa7261eec7a268366565db84af474.tar.gz linux-3.10-055c9fa8874fa7261eec7a268366565db84af474.tar.bz2 linux-3.10-055c9fa8874fa7261eec7a268366565db84af474.zip |
Merge tag 'fixes-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Yes, this is a *LATE* GPIO pull request with fixes for v3.5.
Grant moved across the planet and accidentally fell off the grid, so
he asked me to take over the GPIO merges for a while 10 days ago.
Since then I went over the archives and collected this pile of fixes,
and pulled two of them from the TI maintainer Kevin Hilman. Then
waited for them to at least hit linux-next once or twice."
GPIO fixes for v3.5:
- Invalid context restore on bank 0 for OMAP driver in runtime
suspend/resume cycle
- Check for NULL platform data in sta-2x11 driver
- Constrain selection of the V1 MSM GPIO driver to applicable platforms
(Kconfig issue)
- Make sure the correct output value is set in the wm8994 driver
- Export devm_gpio_request_one() so it can be used in modules.
Apparently some in-kernel modules can be configured to use this
leading to breakage.
- Check that the GPIO is valid in the lantiq driver
- Fix the flag bits introduced for v3.5, so they don't overlap
- Fix a device tree intialization bug for imx21-compatible devices
- Carry over the OF node to the TPS65910 GPIO chip struct
* tag 'fixes-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: tps65910: initialize of_node of gpio_chip
gpio/mxc: make irqs work for fsl,imx21-gpio devices
gpio: fix bits conflict for gpio flags
mips: pci-lantiq: Fix check for valid gpio
gpio: export devm_gpio_request_one
gpiolib: wm8994: Pay attention to the value set when enabling as output
gpio/msm_v1: CONFIG_GPIO_MSM_V1 is only available on three SoCs
gpio-sta2x11: don't use pdata if null
gpio/omap: fix invalid context restore of gpio bank-0
gpio/omap: fix irq loss while in idle with debounce on
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/gpio/Kconfig | 2 | ||||
-rw-r--r-- | drivers/gpio/devres.c | 1 | ||||
-rw-r--r-- | drivers/gpio/gpio-mxc.c | 10 | ||||
-rw-r--r-- | drivers/gpio/gpio-omap.c | 14 | ||||
-rw-r--r-- | drivers/gpio/gpio-sta2x11.c | 5 | ||||
-rw-r--r-- | drivers/gpio/gpio-tps65910.c | 1 | ||||
-rw-r--r-- | drivers/gpio/gpio-wm8994.c | 5 |
7 files changed, 29 insertions, 9 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index c4067d0141f..542f0c04b69 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -136,7 +136,7 @@ config GPIO_MPC8XXX config GPIO_MSM_V1 tristate "Qualcomm MSM GPIO v1" - depends on GPIOLIB && ARCH_MSM + depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50) help Say yes here to support the GPIO interface on ARM v6 based Qualcomm MSM chips. Most of the pins on the MSM can be diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c index 9e9947cb86a..1077754f828 100644 --- a/drivers/gpio/devres.c +++ b/drivers/gpio/devres.c @@ -98,6 +98,7 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio, return 0; } +EXPORT_SYMBOL(devm_gpio_request_one); /** * devm_gpio_free - free an interrupt diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index c337143b18f..c89c4c1e668 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -398,10 +398,12 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) writel(~0, port->base + GPIO_ISR); if (mxc_gpio_hwtype == IMX21_GPIO) { - /* setup one handler for all GPIO interrupts */ - if (pdev->id == 0) - irq_set_chained_handler(port->irq, - mx2_gpio_irq_handler); + /* + * Setup one handler for all GPIO interrupts. Actually setting + * the handler is needed only once, but doing it for every port + * is more robust and easier. + */ + irq_set_chained_handler(port->irq, mx2_gpio_irq_handler); } else { /* setup one handler for each entry */ irq_set_chained_handler(port->irq, mx3_gpio_irq_handler); diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index c4ed1722734..4fbc208c32c 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -174,12 +174,22 @@ static inline void _gpio_dbck_enable(struct gpio_bank *bank) if (bank->dbck_enable_mask && !bank->dbck_enabled) { clk_enable(bank->dbck); bank->dbck_enabled = true; + + __raw_writel(bank->dbck_enable_mask, + bank->base + bank->regs->debounce_en); } } static inline void _gpio_dbck_disable(struct gpio_bank *bank) { if (bank->dbck_enable_mask && bank->dbck_enabled) { + /* + * Disable debounce before cutting it's clock. If debounce is + * enabled but the clock is not, GPIO module seems to be unable + * to detect events and generate interrupts at least on OMAP3. + */ + __raw_writel(0, bank->base + bank->regs->debounce_en); + clk_disable(bank->dbck); bank->dbck_enabled = false; } @@ -1081,7 +1091,6 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) bank->is_mpuio = pdata->is_mpuio; bank->non_wakeup_gpios = pdata->non_wakeup_gpios; bank->loses_context = pdata->loses_context; - bank->get_context_loss_count = pdata->get_context_loss_count; bank->regs = pdata->regs; #ifdef CONFIG_OF_GPIO bank->chip.of_node = of_node_get(node); @@ -1135,6 +1144,9 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) omap_gpio_chip_init(bank); omap_gpio_show_rev(bank); + if (bank->loses_context) + bank->get_context_loss_count = pdata->get_context_loss_count; + pm_runtime_put(bank->dev); list_add_tail(&bank->node, &omap_gpio_list); diff --git a/drivers/gpio/gpio-sta2x11.c b/drivers/gpio/gpio-sta2x11.c index 38416be8ba1..6064fb376e1 100644 --- a/drivers/gpio/gpio-sta2x11.c +++ b/drivers/gpio/gpio-sta2x11.c @@ -383,8 +383,9 @@ static int __devinit gsta_probe(struct platform_device *dev) } spin_lock_init(&chip->lock); gsta_gpio_setup(chip); - for (i = 0; i < GSTA_NR_GPIO; i++) - gsta_set_config(chip, i, gpio_pdata->pinconfig[i]); + if (gpio_pdata) + for (i = 0; i < GSTA_NR_GPIO; i++) + gsta_set_config(chip, i, gpio_pdata->pinconfig[i]); /* 384 was used in previous code: be compatible for other drivers */ err = irq_alloc_descs(-1, 384, GSTA_NR_GPIO, NUMA_NO_NODE); diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c index c1ad2884f2e..0749f963086 100644 --- a/drivers/gpio/gpio-tps65910.c +++ b/drivers/gpio/gpio-tps65910.c @@ -149,6 +149,7 @@ static int __devinit tps65910_gpio_probe(struct platform_device *pdev) tps65910_gpio->gpio_chip.set = tps65910_gpio_set; tps65910_gpio->gpio_chip.get = tps65910_gpio_get; tps65910_gpio->gpio_chip.dev = &pdev->dev; + tps65910_gpio->gpio_chip.of_node = tps65910->dev->of_node; if (pdata && pdata->gpio_base) tps65910_gpio->gpio_chip.base = pdata->gpio_base; else diff --git a/drivers/gpio/gpio-wm8994.c b/drivers/gpio/gpio-wm8994.c index 92ea5350dfe..aa61ad2fcaa 100644 --- a/drivers/gpio/gpio-wm8994.c +++ b/drivers/gpio/gpio-wm8994.c @@ -89,8 +89,11 @@ static int wm8994_gpio_direction_out(struct gpio_chip *chip, struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip); struct wm8994 *wm8994 = wm8994_gpio->wm8994; + if (value) + value = WM8994_GPN_LVL; + return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, - WM8994_GPN_DIR, 0); + WM8994_GPN_DIR | WM8994_GPN_LVL, value); } static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |