[SCSI] fix command retries in spi_transport class

The premise is that domain validation is likely to trigger errors which
it wants to know about, so the only time it should be retrying them is
when it gets a unit attention (likely as the result of a previous bus or
device reset).  Ironically, the previous coding retried three times in
all cases except those of unit attention.  The attached fixes this to do
the right thing.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 34 insertions, 15 deletions

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 303d7656f71..28966d05435 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/workqueue.h>
+#include <linux/blkdev.h>
 #include <asm/semaphore.h>
 #include <scsi/scsi.h>
 #include "scsi_priv.h"
@@ -41,6 +42,11 @@
 
 #define SPI_MAX_ECHO_BUFFER_SIZE	4096
 
+#define DV_LOOPS	3
+#define DV_TIMEOUT	(10*HZ)
+#define DV_RETRIES	3	/* should only need at most 
+				 * two cc/ua clears */
+
 /* Private data accessors (keep these out of the header file) */
 #define spi_dv_pending(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_pending)
 #define spi_dv_sem(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_sem)
@@ -100,6 +106,29 @@ static int sprint_frac(char *dest, int value, int denom)
 	return result;
 }
 
+/* Modification of scsi_wait_req that will clear UNIT ATTENTION conditions
+ * resulting from (likely) bus and device resets */
+static void spi_wait_req(struct scsi_request *sreq, const void *cmd,
+			 void *buffer, unsigned bufflen)
+{
+	int i;
+
+	for(i = 0; i < DV_RETRIES; i++) {
+		sreq->sr_request->flags |= REQ_FAILFAST;
+
+		scsi_wait_req(sreq, cmd, buffer, bufflen,
+			      DV_TIMEOUT, /* retries */ 1);
+		if (sreq->sr_result & DRIVER_SENSE) {
+			struct scsi_sense_hdr sshdr;
+
+			if (scsi_request_normalize_sense(sreq, &sshdr)
+			    && sshdr.sense_key == UNIT_ATTENTION)
+				continue;
+		}
+		break;
+	}
+}
+
 static struct {
 	enum spi_signal_type	value;
 	char			*name;
@@ -378,11 +407,6 @@ static CLASS_DEVICE_ATTR(signalling, S_IRUGO | S_IWUSR,
 	if(i->f->set_##x)		\
 		i->f->set_##x(sdev->sdev_target, y)
 
-#define DV_LOOPS	3
-#define DV_TIMEOUT	(10*HZ)
-#define DV_RETRIES	3	/* should only need at most 
-				 * two cc/ua clears */
-
 enum spi_compare_returns {
 	SPI_COMPARE_SUCCESS,
 	SPI_COMPARE_FAILURE,
@@ -446,8 +470,7 @@ spi_dv_device_echo_buffer(struct scsi_request *sreq, u8 *buffer,
 	for (r = 0; r < retries; r++) {
 		sreq->sr_cmd_len = 0;	/* wait_req to fill in */
 		sreq->sr_data_direction = DMA_TO_DEVICE;
-		scsi_wait_req(sreq, spi_write_buffer, buffer, len,
-			      DV_TIMEOUT, DV_RETRIES);
+		spi_wait_req(sreq, spi_write_buffer, buffer, len);
 		if(sreq->sr_result || !scsi_device_online(sdev)) {
 			struct scsi_sense_hdr sshdr;
 
@@ -471,8 +494,7 @@ spi_dv_device_echo_buffer(struct scsi_request *sreq, u8 *buffer,
 		memset(ptr, 0, len);
 		sreq->sr_cmd_len = 0;	/* wait_req to fill in */
 		sreq->sr_data_direction = DMA_FROM_DEVICE;
-		scsi_wait_req(sreq, spi_read_buffer, ptr, len,
-			      DV_TIMEOUT, DV_RETRIES);
+		spi_wait_req(sreq, spi_read_buffer, ptr, len);
 		scsi_device_set_state(sdev, SDEV_QUIESCE);
 
 		if (memcmp(buffer, ptr, len) != 0)
@@ -500,8 +522,7 @@ spi_dv_device_compare_inquiry(struct scsi_request *sreq, u8 *buffer,
 
 		memset(ptr, 0, len);
 
-		scsi_wait_req(sreq, spi_inquiry, ptr, len,
-			      DV_TIMEOUT, DV_RETRIES);
+		spi_wait_req(sreq, spi_inquiry, ptr, len);
 		
 		if(sreq->sr_result || !scsi_device_online(sdev)) {
 			scsi_device_set_state(sdev, SDEV_QUIESCE);
@@ -593,8 +614,7 @@ spi_dv_device_get_echo_buffer(struct scsi_request *sreq, u8 *buffer)
 	 * (reservation conflict, device not ready, etc) just
 	 * skip the write tests */
 	for (l = 0; ; l++) {
-		scsi_wait_req(sreq, spi_test_unit_ready, NULL, 0,
-			      DV_TIMEOUT, DV_RETRIES);
+		spi_wait_req(sreq, spi_test_unit_ready, NULL, 0);
 
 		if(sreq->sr_result) {
 			if(l >= 3)
@@ -608,8 +628,7 @@ spi_dv_device_get_echo_buffer(struct scsi_request *sreq, u8 *buffer)
 	sreq->sr_cmd_len = 0;
 	sreq->sr_data_direction = DMA_FROM_DEVICE;
 
-	scsi_wait_req(sreq, spi_read_buffer_descriptor, buffer, 4,
-		      DV_TIMEOUT, DV_RETRIES);
+	spi_wait_req(sreq, spi_read_buffer_descriptor, buffer, 4);
 
 	if (sreq->sr_result)
 		/* Device has no echo buffer */