diff options
author | Antti Palosaari <crope@iki.fi> | 2012-08-12 22:27:07 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-08-13 15:58:12 -0300 |
commit | c01a35955fc6cbf4b36fd87c4af5691a81fcda5a (patch) | |
tree | b6c2ba06d98f226d48d7b1bcab89859c55fec7f9 /drivers/media | |
parent | d584b8386e1dacfb153cd9962ae2a01142234750 (diff) | |
download | linux-3.10-c01a35955fc6cbf4b36fd87c4af5691a81fcda5a.tar.gz linux-3.10-c01a35955fc6cbf4b36fd87c4af5691a81fcda5a.tar.bz2 linux-3.10-c01a35955fc6cbf4b36fd87c4af5691a81fcda5a.zip |
[media] rtl28xxu: convert to new DVB USB
Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media')
-rw-r--r-- | drivers/media/dvb/dvb-usb-v2/Kconfig | 13 | ||||
-rw-r--r-- | drivers/media/dvb/dvb-usb-v2/Makefile | 3 | ||||
-rw-r--r-- | drivers/media/dvb/dvb-usb-v2/rtl28xxu.c (renamed from drivers/media/dvb/dvb-usb/rtl28xxu.c) | 607 | ||||
-rw-r--r-- | drivers/media/dvb/dvb-usb-v2/rtl28xxu.h (renamed from drivers/media/dvb/dvb-usb/rtl28xxu.h) | 26 | ||||
-rw-r--r-- | drivers/media/dvb/dvb-usb/Kconfig | 13 | ||||
-rw-r--r-- | drivers/media/dvb/dvb-usb/Makefile | 3 |
6 files changed, 260 insertions, 405 deletions
diff --git a/drivers/media/dvb/dvb-usb-v2/Kconfig b/drivers/media/dvb/dvb-usb-v2/Kconfig index 14a635b97b0..ed87935dc8d 100644 --- a/drivers/media/dvb/dvb-usb-v2/Kconfig +++ b/drivers/media/dvb/dvb-usb-v2/Kconfig @@ -124,3 +124,16 @@ config DVB_USB_MXL111SF help Say Y here to support the MxL111SF USB2.0 DTV receiver. +config DVB_USB_RTL28XXU + tristate "Realtek RTL28xxU DVB USB support" + depends on DVB_USB_V2 && EXPERIMENTAL + select DVB_RTL2830 + select DVB_RTL2832 + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE + help + Say Y here to support the Realtek RTL28xxU DVB USB receiver. + diff --git a/drivers/media/dvb/dvb-usb-v2/Makefile b/drivers/media/dvb/dvb-usb-v2/Makefile index 26659bc7fa6..002e8888382 100644 --- a/drivers/media/dvb/dvb-usb-v2/Makefile +++ b/drivers/media/dvb/dvb-usb-v2/Makefile @@ -36,6 +36,9 @@ obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o +dvb-usb-rtl28xxu-objs = rtl28xxu.o +obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o + ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/ ccflags-y += -I$(srctree)/drivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c b/drivers/media/dvb/dvb-usb-v2/rtl28xxu.c index 6bd0bd79243..493d531109a 100644 --- a/drivers/media/dvb/dvb-usb/rtl28xxu.c +++ b/drivers/media/dvb/dvb-usb-v2/rtl28xxu.c @@ -31,10 +31,6 @@ #include "fc0012.h" #include "fc0013.h" -/* debug */ -static int dvb_usb_rtl28xxu_debug; -module_param_named(debug, dvb_usb_rtl28xxu_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) @@ -66,8 +62,7 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) if (ret > 0) ret = 0; - deb_dump(0, requesttype, req->value, req->index, buf, req->size, - deb_xfer); + deb_dump(0, requesttype, req->value, req->index, buf, req->size); /* read request, copy returned data to return buf */ if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) @@ -80,7 +75,7 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -291,7 +286,8 @@ static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = { static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) { int ret; - struct rtl28xxu_priv *priv = adap->dev->priv; + struct dvb_usb_device *d = adap_to_d(adap); + struct rtl28xxu_priv *priv = d_to_priv(d); u8 buf[1]; struct rtl2830_config *rtl2830_config; /* open RTL2831U/RTL2830 I2C gate */ @@ -301,7 +297,7 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) /* for QT1010 tuner probe */ struct rtl28xxu_req req_qt1010 = { 0x0fc4, CMD_I2C_RD, 1, buf }; - deb_info("%s:\n", __func__); + dev_dbg(&d->udev->dev, "%s:\n", __func__); /* * RTL2831U GPIOs @@ -312,12 +308,12 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) */ /* GPIO direction */ - ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a); + ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, 0x0a); if (ret) goto err; /* enable as output GPIO0, GPIO2, GPIO4 */ - ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15); + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, 0x15); if (ret) goto err; @@ -330,58 +326,58 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) msleep(20); /* open demod I2C gate */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate); + ret = rtl28xxu_ctrl_msg(d, &req_gate); if (ret) goto err; /* check QT1010 ID(?) register; reg=0f val=2c */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_qt1010); + ret = rtl28xxu_ctrl_msg(d, &req_qt1010); if (ret == 0 && buf[0] == 0x2c) { priv->tuner = TUNER_RTL2830_QT1010; rtl2830_config = &rtl28xxu_rtl2830_qt1010_config; - deb_info("%s: QT1010\n", __func__); + dev_dbg(&d->udev->dev, "%s: QT1010\n", __func__); goto found; } else { - deb_info("%s: QT1010 probe failed=%d - %02x\n", - __func__, ret, buf[0]); + dev_dbg(&d->udev->dev, "%s: QT1010 probe failed=%d - %02x\n", + __func__, ret, buf[0]); } /* open demod I2C gate */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate); + ret = rtl28xxu_ctrl_msg(d, &req_gate); if (ret) goto err; /* check MT2060 ID register; reg=00 val=63 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2060); + ret = rtl28xxu_ctrl_msg(d, &req_mt2060); if (ret == 0 && buf[0] == 0x63) { priv->tuner = TUNER_RTL2830_MT2060; rtl2830_config = &rtl28xxu_rtl2830_mt2060_config; - deb_info("%s: MT2060\n", __func__); + dev_dbg(&d->udev->dev, "%s: MT2060\n", __func__); goto found; } else { - deb_info("%s: MT2060 probe failed=%d - %02x\n", - __func__, ret, buf[0]); + dev_dbg(&d->udev->dev, "%s: MT2060 probe failed=%d - %02x\n", + __func__, ret, buf[0]); } /* assume MXL5005S */ ret = 0; priv->tuner = TUNER_RTL2830_MXL5005S; rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config; - deb_info("%s: MXL5005S\n", __func__); + dev_dbg(&d->udev->dev, "%s: MXL5005S\n", __func__); goto found; found: /* attach demodulator */ - adap->fe_adap[0].fe = dvb_attach(rtl2830_attach, rtl2830_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe == NULL) { + adap->fe[0] = dvb_attach(rtl2830_attach, rtl2830_config, + &d->i2c_adap); + if (adap->fe[0] == NULL) { ret = -ENODEV; goto err; } return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -405,7 +401,8 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, int ret; u8 val; - deb_info("%s cmd=%d arg=%d\n", __func__, cmd, arg); + dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg); + switch (cmd) { case FC_FE_CALLBACK_VHF_ENABLE: /* set output values */ @@ -430,8 +427,7 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, return 0; err: - err("%s: failed=%d\n", __func__, ret); - + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -476,15 +472,12 @@ static int rtl2832u_frontend_callback(void *adapter_priv, int component, return -EINVAL; } - - - static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) { int ret; - struct rtl28xxu_priv *priv = adap->dev->priv; + struct dvb_usb_device *d = adap_to_d(adap); + struct rtl28xxu_priv *priv = d_to_priv(d); struct rtl2832_config *rtl2832_config; - u8 buf[2], val; /* open RTL2832U/RTL2832 I2C gate */ struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"}; @@ -511,167 +504,173 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) /* for TDA18272 tuner probe */ struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf}; - deb_info("%s:\n", __func__); + dev_dbg(&d->udev->dev, "%s:\n", __func__); - - ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_DIR, &val); + ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR, &val); if (ret) goto err; val &= 0xbf; - ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, val); + ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val); if (ret) goto err; - /* enable as output GPIO3 and GPIO6*/ - ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_EN, &val); + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN, &val); if (ret) goto err; val |= 0x48; - ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, val); + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val); if (ret) goto err; - - /* * Probe used tuner. We need to know used tuner before demod attach * since there is some demod params needed to set according to tuner. */ /* open demod I2C gate */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_open); + ret = rtl28xxu_ctrl_msg(d, &req_gate_open); if (ret) goto err; priv->tuner = TUNER_NONE; /* check FC0012 ID register; reg=00 val=a1 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0012); + ret = rtl28xxu_ctrl_msg(d, &req_fc0012); if (ret == 0 && buf[0] == 0xa1) { priv->tuner = TUNER_RTL2832_FC0012; rtl2832_config = &rtl28xxu_rtl2832_fc0012_config; - info("%s: FC0012 tuner found", __func__); + dev_info(&d->udev->dev, "%s: FC0012 tuner found", + KBUILD_MODNAME); goto found; } /* check FC0013 ID register; reg=00 val=a3 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0013); + ret = rtl28xxu_ctrl_msg(d, &req_fc0013); if (ret == 0 && buf[0] == 0xa3) { priv->tuner = TUNER_RTL2832_FC0013; rtl2832_config = &rtl28xxu_rtl2832_fc0013_config; - info("%s: FC0013 tuner found", __func__); + dev_info(&d->udev->dev, "%s: FC0013 tuner found", + KBUILD_MODNAME); goto found; } /* check MT2266 ID register; reg=00 val=85 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2266); + ret = rtl28xxu_ctrl_msg(d, &req_mt2266); if (ret == 0 && buf[0] == 0x85) { priv->tuner = TUNER_RTL2832_MT2266; /* TODO implement tuner */ - info("%s: MT2266 tuner found", __func__); + dev_info(&d->udev->dev, "%s: MT2266 tuner found", + KBUILD_MODNAME); goto unsupported; } /* check FC2580 ID register; reg=01 val=56 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc2580); + ret = rtl28xxu_ctrl_msg(d, &req_fc2580); if (ret == 0 && buf[0] == 0x56) { priv->tuner = TUNER_RTL2832_FC2580; /* TODO implement tuner */ - info("%s: FC2580 tuner found", __func__); + dev_info(&d->udev->dev, "%s: FC2580 tuner found", + KBUILD_MODNAME); goto unsupported; } /* check MT2063 ID register; reg=00 val=9e || 9c */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2063); + ret = rtl28xxu_ctrl_msg(d, &req_mt2063); if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) { priv->tuner = TUNER_RTL2832_MT2063; /* TODO implement tuner */ - info("%s: MT2063 tuner found", __func__); + dev_info(&d->udev->dev, "%s: MT2063 tuner found", + KBUILD_MODNAME); goto unsupported; } /* check MAX3543 ID register; reg=00 val=38 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_max3543); + ret = rtl28xxu_ctrl_msg(d, &req_max3543); if (ret == 0 && buf[0] == 0x38) { priv->tuner = TUNER_RTL2832_MAX3543; /* TODO implement tuner */ - info("%s: MAX3534 tuner found", __func__); + dev_info(&d->udev->dev, "%s: MAX3534 tuner found", + KBUILD_MODNAME); goto unsupported; } /* check TUA9001 ID register; reg=7e val=2328 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_tua9001); + ret = rtl28xxu_ctrl_msg(d, &req_tua9001); if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) { priv->tuner = TUNER_RTL2832_TUA9001; /* TODO implement tuner */ - info("%s: TUA9001 tuner found", __func__); + dev_info(&d->udev->dev, "%s: TUA9001 tuner found", + KBUILD_MODNAME); goto unsupported; } /* check MXL5007R ID register; reg=d9 val=14 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_mxl5007t); + ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t); if (ret == 0 && buf[0] == 0x14) { priv->tuner = TUNER_RTL2832_MXL5007T; /* TODO implement tuner */ - info("%s: MXL5007T tuner found", __func__); + dev_info(&d->udev->dev, "%s: MXL5007T tuner found", + KBUILD_MODNAME); goto unsupported; } /* check E4000 ID register; reg=02 val=40 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_e4000); + ret = rtl28xxu_ctrl_msg(d, &req_e4000); if (ret == 0 && buf[0] == 0x40) { priv->tuner = TUNER_RTL2832_E4000; /* TODO implement tuner */ - info("%s: E4000 tuner found", __func__); + dev_info(&d->udev->dev, "%s: E4000 tuner found", + KBUILD_MODNAME); goto unsupported; } /* check TDA18272 ID register; reg=00 val=c760 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_tda18272); + ret = rtl28xxu_ctrl_msg(d, &req_tda18272); if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) { priv->tuner = TUNER_RTL2832_TDA18272; /* TODO implement tuner */ - info("%s: TDA18272 tuner found", __func__); + dev_info(&d->udev->dev, "%s: TDA18272 tuner found", + KBUILD_MODNAME); goto unsupported; } unsupported: /* close demod I2C gate */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close); + ret = rtl28xxu_ctrl_msg(d, &req_gate_close); if (ret) goto err; /* tuner not found */ - deb_info("No compatible tuner found"); + dev_dbg(&d->udev->dev, "%s: No compatible tuner found\n", __func__); ret = -ENODEV; return ret; found: /* close demod I2C gate */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close); + ret = rtl28xxu_ctrl_msg(d, &req_gate_close); if (ret) goto err; /* attach demodulator */ - adap->fe_adap[0].fe = dvb_attach(rtl2832_attach, rtl2832_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe == NULL) { + adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config, + &d->i2c_adap); + if (adap->fe[0] == NULL) { ret = -ENODEV; goto err; } /* set fe callbacks */ - adap->fe_adap[0].fe->callback = rtl2832u_frontend_callback; + adap->fe[0]->callback = rtl2832u_frontend_callback; return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -704,32 +703,34 @@ static struct mxl5005s_config rtl28xxu_mxl5005s_config = { static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap) { int ret; - struct rtl28xxu_priv *priv = adap->dev->priv; + struct dvb_usb_device *d = adap_to_d(adap); + struct rtl28xxu_priv *priv = d_to_priv(d); struct i2c_adapter *rtl2830_tuner_i2c; struct dvb_frontend *fe; - deb_info("%s:\n", __func__); + dev_dbg(&d->udev->dev, "%s:\n", __func__); /* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */ - rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe_adap[0].fe); + rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe[0]); switch (priv->tuner) { case TUNER_RTL2830_QT1010: - fe = dvb_attach(qt1010_attach, adap->fe_adap[0].fe, + fe = dvb_attach(qt1010_attach, adap->fe[0], rtl2830_tuner_i2c, &rtl28xxu_qt1010_config); break; case TUNER_RTL2830_MT2060: - fe = dvb_attach(mt2060_attach, adap->fe_adap[0].fe, + fe = dvb_attach(mt2060_attach, adap->fe[0], rtl2830_tuner_i2c, &rtl28xxu_mt2060_config, 1220); break; case TUNER_RTL2830_MXL5005S: - fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, + fe = dvb_attach(mxl5005s_attach, adap->fe[0], rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config); break; default: fe = NULL; - err("unknown tuner=%d", priv->tuner); + dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME, + priv->tuner); } if (fe == NULL) { @@ -739,40 +740,42 @@ static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap) return 0; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) { int ret; - struct rtl28xxu_priv *priv = adap->dev->priv; + struct dvb_usb_device *d = adap_to_d(adap); + struct rtl28xxu_priv *priv = d_to_priv(d); struct dvb_frontend *fe; - deb_info("%s:\n", __func__); + dev_dbg(&d->udev->dev, "%s:\n", __func__); switch (priv->tuner) { case TUNER_RTL2832_FC0012: - fe = dvb_attach(fc0012_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); + fe = dvb_attach(fc0012_attach, adap->fe[0], + &d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); /* since fc0012 includs reading the signal strength delegate * that to the tuner driver */ - adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0]. - fe->ops.tuner_ops.get_rf_strength; + adap->fe[0]->ops.read_signal_strength = + adap->fe[0]->ops.tuner_ops.get_rf_strength; return 0; break; case TUNER_RTL2832_FC0013: - fe = dvb_attach(fc0013_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); + fe = dvb_attach(fc0013_attach, adap->fe[0], + &d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); /* fc0013 also supports signal strength reading */ - adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0] - .fe->ops.tuner_ops.get_rf_strength; + adap->fe[0]->ops.read_signal_strength = + adap->fe[0]->ops.tuner_ops.get_rf_strength; return 0; default: fe = NULL; - err("unknown tuner=%d", priv->tuner); + dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME, + priv->tuner); } if (fe == NULL) { @@ -782,18 +785,53 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) return 0; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff) +static int rtl28xxu_init(struct dvb_usb_device *d) +{ + int ret; + u8 val; + + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + /* init USB endpoints */ + ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val); + if (ret) + goto err; + + /* enable DMA and Full Packet Mode*/ + val |= 0x09; + ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val); + if (ret) + goto err; + + /* set EPA maximum packet size to 0x0200 */ + ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); + if (ret) + goto err; + + /* change EPA FIFO length */ + ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); + if (ret) + goto err; + + return ret; +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2831u_streaming_ctrl(struct dvb_frontend *fe , int onoff) { int ret; u8 buf[2], gpio; + struct dvb_usb_device *d = fe_to_d(fe); - deb_info("%s: onoff=%d\n", __func__, onoff); + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); - ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_VAL, &gpio); + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio); if (ret) goto err; @@ -807,27 +845,27 @@ static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff) gpio &= (~0x04); /* LED off */ } - ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio); + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio); if (ret) goto err; - ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2); + ret = rtl28xx_wr_regs(d, USB_EPA_CTL, buf, 2); if (ret) goto err; return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff) +static int rtl2832u_streaming_ctrl(struct dvb_frontend *fe , int onoff) { int ret; u8 buf[2]; + struct dvb_usb_device *d = fe_to_d(fe); - deb_info("%s: onoff=%d\n", __func__, onoff); - + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); if (onoff) { buf[0] = 0x00; @@ -837,13 +875,13 @@ static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff) buf[1] = 0x02; /* reset EPA */ } - ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2); + ret = rtl28xx_wr_regs(d, USB_EPA_CTL, buf, 2); if (ret) goto err; return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -852,7 +890,7 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) int ret; u8 gpio, sys0; - deb_info("%s: onoff=%d\n", __func__, onoff); + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); /* demod adc */ ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0); @@ -864,7 +902,8 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) if (ret) goto err; - deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); + dev_dbg(&d->udev->dev, "%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, + sys0, gpio); if (onoff) { gpio |= 0x01; /* GPIO0 = 1 */ @@ -877,7 +916,8 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) sys0 = sys0 & (~0xc0); } - deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); + dev_dbg(&d->udev->dev, "%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, + sys0, gpio); /* demod adc */ ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0); @@ -891,7 +931,7 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -900,7 +940,7 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) int ret; u8 val; - deb_info("%s: onoff=%d\n", __func__, onoff); + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); if (onoff) { /* set output values */ @@ -1012,7 +1052,7 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -1085,10 +1125,21 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d) return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } +static int rtl2831u_get_rc_config(struct dvb_usb_device *d, + struct dvb_usb_rc *rc) +{ + rc->map_name = RC_MAP_EMPTY; + rc->allowed_protos = RC_TYPE_NEC; + rc->query = rtl2831u_rc_query; + rc->interval = 400; + + return 0; +} + static int rtl2832u_rc_query(struct dvb_usb_device *d) { int ret, i; @@ -1146,281 +1197,95 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d) exit: return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -enum rtl28xxu_usb_table_entry { - RTL2831U_0BDA_2831, - RTL2831U_14AA_0160, - RTL2831U_14AA_0161, - RTL2832U_0CCD_00A9, - RTL2832U_1F4D_B803, - RTL2832U_0CCD_00B3, -}; - -static struct usb_device_id rtl28xxu_table[] = { - /* RTL2831U */ - [RTL2831U_0BDA_2831] = { - USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U)}, - [RTL2831U_14AA_0160] = { - USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT)}, - [RTL2831U_14AA_0161] = { - USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2)}, - - /* RTL2832U */ - [RTL2832U_0CCD_00A9] = { - USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1)}, - [RTL2832U_1F4D_B803] = { - USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT)}, - [RTL2832U_0CCD_00B3] = { - USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK)}, - {} /* terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, rtl28xxu_table); - -static struct dvb_usb_device_properties rtl28xxu_properties[] = { - { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .no_reconnect = 1, - - .size_of_priv = sizeof(struct rtl28xxu_priv), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = rtl2831u_frontend_attach, - .tuner_attach = rtl2831u_tuner_attach, - .streaming_ctrl = rtl2831u_streaming_ctrl, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x81, - .u = { - .bulk = { - .buffersize = 8*512, - } - } - } - } - } - } - }, +static int rtl2832u_get_rc_config(struct dvb_usb_device *d, + struct dvb_usb_rc *rc) +{ + rc->map_name = RC_MAP_EMPTY; + rc->allowed_protos = RC_TYPE_NEC; + rc->query = rtl2832u_rc_query; + rc->interval = 400; - .power_ctrl = rtl2831u_power_ctrl, + return 0; +} - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "rtl28xxu", - .rc_query = rtl2831u_rc_query, - .rc_interval = 400, - .allowed_protos = RC_TYPE_NEC, - .rc_codes = RC_MAP_EMPTY, +static const struct dvb_usb_device_properties rtl2831u_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct rtl28xxu_priv), + + .power_ctrl = rtl2831u_power_ctrl, + .i2c_algo = &rtl28xxu_i2c_algo, + .frontend_attach = rtl2831u_frontend_attach, + .tuner_attach = rtl2831u_tuner_attach, + .init = rtl28xxu_init, + .get_rc_config = rtl2831u_get_rc_config, + .streaming_ctrl = rtl2831u_streaming_ctrl, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512), }, - - .i2c_algo = &rtl28xxu_i2c_algo, - - .num_device_descs = 2, - .devices = { - { - .name = "Realtek RTL2831U reference design", - .warm_ids = { - &rtl28xxu_table[RTL2831U_0BDA_2831], - }, - }, - { - .name = "Freecom USB2.0 DVB-T", - .warm_ids = { - &rtl28xxu_table[RTL2831U_14AA_0160], - &rtl28xxu_table[RTL2831U_14AA_0161], - }, - }, - } }, - { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .no_reconnect = 1, - - .size_of_priv = sizeof(struct rtl28xxu_priv), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = rtl2832u_frontend_attach, - .tuner_attach = rtl2832u_tuner_attach, - .streaming_ctrl = rtl2832u_streaming_ctrl, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x81, - .u = { - .bulk = { - .buffersize = 8*512, - } - } - } - } - } - } - }, - - .power_ctrl = rtl2832u_power_ctrl, +}; - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "rtl28xxu", - .rc_query = rtl2832u_rc_query, - .rc_interval = 400, - .allowed_protos = RC_TYPE_NEC, - .rc_codes = RC_MAP_EMPTY, +static const struct dvb_usb_device_properties rtl2832u_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct rtl28xxu_priv), + + .power_ctrl = rtl2832u_power_ctrl, + .i2c_algo = &rtl28xxu_i2c_algo, + .frontend_attach = rtl2832u_frontend_attach, + .tuner_attach = rtl2832u_tuner_attach, + .init = rtl28xxu_init, + .get_rc_config = rtl2832u_get_rc_config, + .streaming_ctrl = rtl2832u_streaming_ctrl, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512), }, - - .i2c_algo = &rtl28xxu_i2c_algo, - - .num_device_descs = 3, - .devices = { - { - .name = "Terratec Cinergy T Stick Black", - .warm_ids = { - &rtl28xxu_table[RTL2832U_0CCD_00A9], - }, - }, - { - .name = "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", - .warm_ids = { - &rtl28xxu_table[RTL2832U_1F4D_B803], - }, - }, - { - .name = "NOXON DAB/DAB+ USB dongle", - .warm_ids = { - &rtl28xxu_table[RTL2832U_0CCD_00B3], - }, - }, - } }, - }; -static int rtl28xxu_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int ret, i; - u8 val; - int properties_count = ARRAY_SIZE(rtl28xxu_properties); - struct dvb_usb_device *d; - struct usb_device *udev; - bool found; - - deb_info("%s: interface=%d\n", __func__, - intf->cur_altsetting->desc.bInterfaceNumber); - - if (intf->cur_altsetting->desc.bInterfaceNumber != 0) - return 0; - - /* Dynamic USB ID support. Replaces first device ID with current one .*/ - udev = interface_to_usbdev(intf); - - for (i = 0, found = false; i < ARRAY_SIZE(rtl28xxu_table) - 1; i++) { - if (rtl28xxu_table[i].idVendor == - le16_to_cpu(udev->descriptor.idVendor) && - rtl28xxu_table[i].idProduct == - le16_to_cpu(udev->descriptor.idProduct)) { - found = true; - break; - } - } - - if (!found) { - deb_info("%s: using dynamic ID %04x:%04x\n", __func__, - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct)); - rtl28xxu_properties[0].devices[0].warm_ids[0]->idVendor = - le16_to_cpu(udev->descriptor.idVendor); - rtl28xxu_properties[0].devices[0].warm_ids[0]->idProduct = - le16_to_cpu(udev->descriptor.idProduct); - } - - for (i = 0; i < properties_count; i++) { - ret = dvb_usb_device_init(intf, &rtl28xxu_properties[i], - THIS_MODULE, &d, adapter_nr); - if (ret == 0 || ret != -ENODEV) - break; - } - - if (ret) - goto err; - - - /* init USB endpoints */ - ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val); - if (ret) - goto err; - - /* enable DMA and Full Packet Mode*/ - val |= 0x09; - ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val); - if (ret) - goto err; - - /* set EPA maximum packet size to 0x0200 */ - ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); - if (ret) - goto err; - - /* change EPA FIFO length */ - ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); - if (ret) - goto err; - - return ret; -err: - deb_info("%s: failed=%d\n", __func__, ret); - return ret; -} - -static struct usb_driver rtl28xxu_driver = { - .name = "dvb_usb_rtl28xxu", - .probe = rtl28xxu_probe, - .disconnect = dvb_usb_device_exit, - .id_table = rtl28xxu_table, +static const struct usb_device_id rtl28xxu_id_table[] = { + { DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U, + &rtl2831u_props, "Realtek RTL2831U reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT, + &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) }, + { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2, + &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) }, + + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1, + &rtl2832u_props, "Terratec Cinergy T Stick Black", NULL) }, + { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT, + &rtl2832u_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK, + &rtl2832u_props, "NOXON DAB/DAB+ USB dongle", NULL) }, + { } +}; +MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table); + +static struct usb_driver rtl28xxu_usb_driver = { + .name = KBUILD_MODNAME, + .id_table = rtl28xxu_id_table, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, }; -/* module stuff */ -static int __init rtl28xxu_module_init(void) -{ - int ret; - - deb_info("%s:\n", __func__); - - ret = usb_register(&rtl28xxu_driver); - if (ret) - err("usb_register failed=%d", ret); - - return ret; -} - -static void __exit rtl28xxu_module_exit(void) -{ - deb_info("%s:\n", __func__); - - /* deregister this driver from the USB subsystem */ - usb_deregister(&rtl28xxu_driver); -} - -module_init(rtl28xxu_module_init); -module_exit(rtl28xxu_module_exit); +module_usb_driver(rtl28xxu_usb_driver); MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver"); MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.h b/drivers/media/dvb/dvb-usb-v2/rtl28xxu.h index 90f3bb4f4c0..575edbf13a9 100644 --- a/drivers/media/dvb/dvb-usb/rtl28xxu.h +++ b/drivers/media/dvb/dvb-usb-v2/rtl28xxu.h @@ -22,27 +22,17 @@ #ifndef RTL28XXU_H #define RTL28XXU_H -#define DVB_USB_LOG_PREFIX "rtl28xxu" -#include "dvb-usb.h" +#include "dvb_usb.h" -#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args) -#define deb_rc(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x02, args) -#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args) -#define deb_reg(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x08, args) -#define deb_i2c(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x10, args) -#define deb_fw(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x20, args) - -#define deb_dump(r, t, v, i, b, l, func) { \ - int loop_; \ - func("%02x %02x %02x %02x %02x %02x %02x %02x", \ - t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \ +#define deb_dump(r, t, v, i, b, l) { \ + char *direction; \ if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ - func(" >>> "); \ + direction = ">>>"; \ else \ - func(" <<< "); \ - for (loop_ = 0; loop_ < l; loop_++) \ - func("%02x ", b[loop_]); \ - func("\n");\ + direction = "<<<"; \ + dev_dbg(&d->udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \ + "%s [%d bytes]\n", __func__, t, r, v & 0xff, v >> 8, \ + i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l); \ } /* diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 8e13877a5c2..ec10c0f2f55 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -319,16 +319,3 @@ config DVB_USB_IT913X help Say Y here to support the it913x device -config DVB_USB_RTL28XXU - tristate "Realtek RTL28xxU DVB USB support" - depends on DVB_USB && EXPERIMENTAL - select DVB_RTL2830 - select DVB_RTL2832 - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Realtek RTL28xxU DVB USB receiver. - diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 859baf9c8e0..d1912e0e168 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -78,9 +78,6 @@ obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o dvb-usb-it913x-objs := it913x.o obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o -dvb-usb-rtl28xxu-objs = rtl28xxu.o -obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o - ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/ # due to tuner-xc3028 |