Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull second set of media updates from Mauro Carvalho Chehab:
 "Despite its size, most of the stuff here is trivial.  This series
  contains:

   - s5p-mfc: additions at the driver and at the core to support H.264
     hardware codec;
   - Some improvements at s5p and davinci embedded drivers;
   - Some V4L2 compliance fixes applied on a few drivers;
   - Several random trivial patches, including several fixes and a few
     new board support additions;

  Notes:

   1) Some Exynos media patches were dependent on some -arm fixes that
      got merged on changeset 782cd9e.  That's why this pull request is
      based that changeset.

   2) As promised, I reviewed the pending VB2 DMABUF series.

      While setting a test environment, it was noticed that the upstream
      support for Samsung Exynos 4 boards (smdk310 and Origen) are
      broken upstream, likely due to regressions: both defconfigs are
      wrong and regulator settings for both boards are broken.  That,
      allied with some bug at the dummy regulator driver, causes OOPSes
      during boot time.

      Long story short: even fixing the above, the proposed patches
      OOPSed when running the DMABUF test.  Not sure yet if the OOPSes
      are due to some other undetected regressions, or due to some bug
      on the patches.

      Due to the above, DMABUF patches for vb2 got NACKed for 3.7."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (109 commits)
  [media] m5mols: Add missing #include <linux/sizes.h>
  [media] stk1160: Add support for S-Video input
  Revert "[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check"
  [media]  dvb: LNA implementation changes
  [media] v4l2-ioctl: fix W=1 warnings
  [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID
  [media] omap3isp: Fix compilation error in ispreg.h
  [media] rc-msi-digivox-ii: Add full scan keycodes
  [media] cx25821: testing the wrong variable
  [media] tda18271-common: hold the I2C adapter during write transfers
  [media] ds3000: add module parameter to force firmware upload
  [media] drivers/media: Remove unnecessary semicolon
  [media] winbond: remove space from driver name
  [media] iguanair: cannot send data from the stack
  [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
  [media] dvb-usb: print small buffers via %*ph
  [media] uvc: Add return code check at vb2_queue_init()
  [media] em28xx: Replace memcpy with struct assignment
  [media] bt8xx: Add video4linux control V4L2_CID_COLOR_KILLER
  [media] mem2mem_testdev: Use devm_kzalloc() in probe
  ...

Conflicts:
	arch/arm/mach-davinci/include/mach/da8xx.h

1 files changed, 6 insertions, 71 deletions

diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c
index 1f3943bb87d..d5e10215a28 100644
--- a/drivers/media/i2c/tvp514x.c
+++ b/drivers/media/i2c/tvp514x.c
@@ -519,6 +519,12 @@ static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
 
 	*std_id = V4L2_STD_UNKNOWN;
 
+	/* To query the standard the TVP514x must power on the ADCs. */
+	if (!decoder->streaming) {
+		tvp514x_s_stream(sd, 1);
+		msleep(LOCK_RETRY_DELAY);
+	}
+
 	/* query the current standard */
 	current_std = tvp514x_query_current_std(sd);
 	if (current_std == STD_INVALID)
@@ -625,25 +631,12 @@ static int tvp514x_s_routing(struct v4l2_subdev *sd,
 	int err;
 	enum tvp514x_input input_sel;
 	enum tvp514x_output output_sel;
-	u8 sync_lock_status, lock_mask;
-	int try_count = LOCK_RETRY_COUNT;
 
 	if ((input >= INPUT_INVALID) ||
 			(output >= OUTPUT_INVALID))
 		/* Index out of bound */
 		return -EINVAL;
 
-	/*
-	 * For the sequence streamon -> streamoff and again s_input
-	 * it fails to lock the signal, since streamoff puts TVP514x
-	 * into power off state which leads to failure in sub-sequent s_input.
-	 *
-	 * So power up the TVP514x device here, since it is important to lock
-	 * the signal at this stage.
-	 */
-	if (!decoder->streaming)
-		tvp514x_s_stream(sd, 1);
-
 	input_sel = input;
 	output_sel = output;
 
@@ -660,64 +653,6 @@ static int tvp514x_s_routing(struct v4l2_subdev *sd,
 
 	decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel;
 	decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel;
-
-	/* Clear status */
-	msleep(LOCK_RETRY_DELAY);
-	err =
-	    tvp514x_write_reg(sd, REG_CLEAR_LOST_LOCK, 0x01);
-	if (err)
-		return err;
-
-	switch (input_sel) {
-	case INPUT_CVBS_VI1A:
-	case INPUT_CVBS_VI1B:
-	case INPUT_CVBS_VI1C:
-	case INPUT_CVBS_VI2A:
-	case INPUT_CVBS_VI2B:
-	case INPUT_CVBS_VI2C:
-	case INPUT_CVBS_VI3A:
-	case INPUT_CVBS_VI3B:
-	case INPUT_CVBS_VI3C:
-	case INPUT_CVBS_VI4A:
-		lock_mask = STATUS_CLR_SUBCAR_LOCK_BIT |
-			STATUS_HORZ_SYNC_LOCK_BIT |
-			STATUS_VIRT_SYNC_LOCK_BIT;
-		break;
-
-	case INPUT_SVIDEO_VI2A_VI1A:
-	case INPUT_SVIDEO_VI2B_VI1B:
-	case INPUT_SVIDEO_VI2C_VI1C:
-	case INPUT_SVIDEO_VI2A_VI3A:
-	case INPUT_SVIDEO_VI2B_VI3B:
-	case INPUT_SVIDEO_VI2C_VI3C:
-	case INPUT_SVIDEO_VI4A_VI1A:
-	case INPUT_SVIDEO_VI4A_VI1B:
-	case INPUT_SVIDEO_VI4A_VI1C:
-	case INPUT_SVIDEO_VI4A_VI3A:
-	case INPUT_SVIDEO_VI4A_VI3B:
-	case INPUT_SVIDEO_VI4A_VI3C:
-		lock_mask = STATUS_HORZ_SYNC_LOCK_BIT |
-			STATUS_VIRT_SYNC_LOCK_BIT;
-		break;
-	/* Need to add other interfaces*/
-	default:
-		return -EINVAL;
-	}
-
-	while (try_count-- > 0) {
-		/* Allow decoder to sync up with new input */
-		msleep(LOCK_RETRY_DELAY);
-
-		sync_lock_status = tvp514x_read_reg(sd,
-				REG_STATUS1);
-		if (lock_mask == (sync_lock_status & lock_mask))
-			/* Input detected */
-			break;
-	}
-
-	if (try_count < 0)
-		return -EINVAL;
-
 	decoder->input = input;
 	decoder->output = output;