iio:adc:max1363 move from staging.

Now this driver is using kfifo we can move it out of staging.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>

3 files changed, 1719 insertions, 0 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 706386ba02e..ef5200a6850 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -73,4 +73,22 @@ config LP8788_ADC
 	help
 	  Say yes here to build support for TI LP8788 ADC.
 
+config MAX1363
+	tristate "Maxim max1363 ADC driver"
+	depends on I2C
+	select IIO_TRIGGER
+	select MAX1363_RING_BUFFER
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
+	help
+	  Say yes here to build support for many Maxim i2c analog to digital
+	  converters (ADC). (max1361, max1362, max1363, max1364, max1036,
+	  max1037, max1038, max1039, max1136, max1136, max1137, max1138,
+	  max1139, max1236, max1237, max11238, max1239, max11600, max11601,
+	  max11602, max11603, max11604, max11605, max11606, max11607,
+	  max11608, max11609, max11610, max11611, max11612, max11613,
+	  max11614, max11615, max11616, max11617, max11644, max11645,
+	  max11646, max11647) Provides direct access via sysfs and buffered
+	  data via the iio dev interface.
+
 endmenu
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 034eacb8f7c..54ac7bbcd01 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_AD7791) += ad7791.o
 obj-$(CONFIG_AD7887) += ad7887.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o
 obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
+obj-$(CONFIG_MAX1363) += max1363.o
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
new file mode 100644
index 00000000000..1e84b5b5509
--- /dev/null
+++ b/drivers/iio/adc/max1363.c
@@ -0,0 +1,1700 @@
+ /*
+  * iio/adc/max1363.c
+  * Copyright (C) 2008-2010 Jonathan Cameron
+  *
+  * based on linux/drivers/i2c/chips/max123x
+  * Copyright (C) 2002-2004 Stefan Eletzhofer
+  *
+  * based on linux/drivers/acron/char/pcf8583.c
+  * Copyright (C) 2000 Russell King
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License version 2 as
+  * published by the Free Software Foundation.
+  *
+  * max1363.c
+  *
+  * Partial support for max1363 and similar chips.
+  *
+  * Not currently implemented.
+  *
+  * - Control of internal reference.
+  */
+
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/list.h>
+#include <linux/i2c.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define MAX1363_SETUP_BYTE(a) ((a) | 0x80)
+
+/* There is a fair bit more defined here than currently
+ * used, but the intention is to support everything these
+ * chips do in the long run */
+
+/* see data sheets */
+/* max1363 and max1236, max1237, max1238, max1239 */
+#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_VDD	0x00
+#define MAX1363_SETUP_AIN3_IS_REF_EXT_TO_REF	0x20
+#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_INT	0x40
+#define MAX1363_SETUP_AIN3_IS_REF_REF_IS_INT	0x60
+#define MAX1363_SETUP_POWER_UP_INT_REF		0x10
+#define MAX1363_SETUP_POWER_DOWN_INT_REF	0x00
+
+/* think about includeing max11600 etc - more settings */
+#define MAX1363_SETUP_EXT_CLOCK			0x08
+#define MAX1363_SETUP_INT_CLOCK			0x00
+#define MAX1363_SETUP_UNIPOLAR			0x00
+#define MAX1363_SETUP_BIPOLAR			0x04
+#define MAX1363_SETUP_RESET			0x00
+#define MAX1363_SETUP_NORESET			0x02
+/* max1363 only - though don't care on others.
+ * For now monitor modes are not implemented as the relevant
+ * line is not connected on my test board.
+ * The definitions are here as I intend to add this soon.
+ */
+#define MAX1363_SETUP_MONITOR_SETUP		0x01
+
+/* Specific to the max1363 */
+#define MAX1363_MON_RESET_CHAN(a) (1 << ((a) + 4))
+#define MAX1363_MON_INT_ENABLE			0x01
+
+/* defined for readability reasons */
+/* All chips */
+#define MAX1363_CONFIG_BYTE(a) ((a))
+
+#define MAX1363_CONFIG_SE			0x01
+#define MAX1363_CONFIG_DE			0x00
+#define MAX1363_CONFIG_SCAN_TO_CS		0x00
+#define MAX1363_CONFIG_SCAN_SINGLE_8		0x20
+#define MAX1363_CONFIG_SCAN_MONITOR_MODE	0x40
+#define MAX1363_CONFIG_SCAN_SINGLE_1		0x60
+/* max123{6-9} only */
+#define MAX1236_SCAN_MID_TO_CHANNEL		0x40
+
+/* max1363 only - merely part of channel selects or don't care for others*/
+#define MAX1363_CONFIG_EN_MON_MODE_READ 0x18
+
+#define MAX1363_CHANNEL_SEL(a) ((a) << 1)
+
+/* max1363 strictly 0x06 - but doesn't matter */
+#define MAX1363_CHANNEL_SEL_MASK		0x1E
+#define MAX1363_SCAN_MASK			0x60
+#define MAX1363_SE_DE_MASK			0x01
+
+#define MAX1363_MAX_CHANNELS 25
+/**
+ * struct max1363_mode - scan mode information
+ * @conf:	The corresponding value of the configuration register
+ * @modemask:	Bit mask corresponding to channels enabled in this mode
+ */
+struct max1363_mode {
+	int8_t		conf;
+	DECLARE_BITMAP(modemask, MAX1363_MAX_CHANNELS);
+};
+
+/* This must be maintained along side the max1363_mode_table in max1363_core */
+enum max1363_modes {
+	/* Single read of a single channel */
+	_s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7, _s8, _s9, _s10, _s11,
+	/* Differential single read */
+	d0m1, d2m3, d4m5, d6m7, d8m9, d10m11,
+	d1m0, d3m2, d5m4, d7m6, d9m8, d11m10,
+	/* Scan to channel and mid to channel where overlapping */
+	s0to1, s0to2, s2to3, s0to3, s0to4, s0to5, s0to6,
+	s6to7, s0to7, s6to8, s0to8, s6to9,
+	s0to9, s6to10, s0to10, s6to11, s0to11,
+	/* Differential scan to channel and mid to channel where overlapping */
+	d0m1to2m3, d0m1to4m5, d0m1to6m7, d6m7to8m9,
+	d0m1to8m9, d6m7to10m11, d0m1to10m11, d1m0to3m2,
+	d1m0to5m4, d1m0to7m6, d7m6to9m8, d1m0to9m8,
+	d7m6to11m10, d1m0to11m10,
+};
+
+/**
+ * struct max1363_chip_info - chip specifc information
+ * @info:		iio core function callbacks structure
+ * @channels:		channel specification
+ * @num_channels:       number of channels
+ * @mode_list:		array of available scan modes
+ * @default_mode:	the scan mode in which the chip starts up
+ * @int_vref_mv:	the internal reference voltage
+ * @num_channels:	number of channels
+ * @bits:		accuracy of the adc in bits
+ */
+struct max1363_chip_info {
+	const struct iio_info		*info;
+	const struct iio_chan_spec	*channels;
+	int				num_channels;
+	const enum max1363_modes	*mode_list;
+	enum max1363_modes		default_mode;
+	u16				int_vref_mv;
+	u8				num_modes;
+	u8				bits;
+};
+
+/**
+ * struct max1363_state - driver instance specific data
+ * @client:		i2c_client
+ * @setupbyte:		cache of current device setup byte
+ * @configbyte:		cache of current device config byte
+ * @chip_info:		chip model specific constants, available modes etc
+ * @current_mode:	the scan mode of this chip
+ * @requestedmask:	a valid requested set of channels
+ * @reg:		supply regulator
+ * @monitor_on:		whether monitor mode is enabled
+ * @monitor_speed:	parameter corresponding to device monitor speed setting
+ * @mask_high:		bitmask for enabled high thresholds
+ * @mask_low:		bitmask for enabled low thresholds
+ * @thresh_high:	high threshold values
+ * @thresh_low:		low threshold values
+ */
+struct max1363_state {
+	struct i2c_client		*client;
+	u8				setupbyte;
+	u8				configbyte;
+	const struct max1363_chip_info	*chip_info;
+	const struct max1363_mode	*current_mode;
+	u32				requestedmask;
+	struct regulator		*reg;
+
+	/* Using monitor modes and buffer at the same time is
+	   currently not supported */
+	bool				monitor_on;
+	unsigned int			monitor_speed:3;
+	u8				mask_high;
+	u8				mask_low;
+	/* 4x unipolar first then the fours bipolar ones */
+	s16				thresh_high[8];
+	s16				thresh_low[8];
+};
+
+#define MAX1363_MODE_SINGLE(_num, _mask) {				\
+		.conf = MAX1363_CHANNEL_SEL(_num)			\
+			| MAX1363_CONFIG_SCAN_SINGLE_1			\
+			| MAX1363_CONFIG_SE,				\
+			.modemask[0] = _mask,				\
+			}
+
+#define MAX1363_MODE_SCAN_TO_CHANNEL(_num, _mask) {			\
+		.conf = MAX1363_CHANNEL_SEL(_num)			\
+			| MAX1363_CONFIG_SCAN_TO_CS			\
+			| MAX1363_CONFIG_SE,				\
+			.modemask[0] = _mask,				\
+			}
+
+/* note not available for max1363 hence naming */
+#define MAX1236_MODE_SCAN_MID_TO_CHANNEL(_mid, _num, _mask) {		\
+		.conf = MAX1363_CHANNEL_SEL(_num)			\
+			| MAX1236_SCAN_MID_TO_CHANNEL			\
+			| MAX1363_CONFIG_SE,				\
+			.modemask[0] = _mask				\
+}
+
+#define MAX1363_MODE_DIFF_SINGLE(_nump, _numm, _mask) {			\
+		.conf = MAX1363_CHANNEL_SEL(_nump)			\
+			| MAX1363_CONFIG_SCAN_SINGLE_1			\
+			| MAX1363_CONFIG_DE,				\
+			.modemask[0] = _mask				\
+			}
+
+/* Can't think how to automate naming so specify for now */
+#define MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(_num, _numvals, _mask) {	\
+		.conf = MAX1363_CHANNEL_SEL(_num)			\
+			| MAX1363_CONFIG_SCAN_TO_CS			\
+			| MAX1363_CONFIG_DE,				\
+			.modemask[0] = _mask				\
+			}
+
+/* note only available for max1363 hence naming */
+#define MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL(_num, _numvals, _mask) {	\
+		.conf = MAX1363_CHANNEL_SEL(_num)			\
+			| MAX1236_SCAN_MID_TO_CHANNEL			\
+			| MAX1363_CONFIG_SE,				\
+			.modemask[0] = _mask				\
+}
+
+static const struct max1363_mode max1363_mode_table[] = {
+	/* All of the single channel options first */
+	MAX1363_MODE_SINGLE(0, 1 << 0),
+	MAX1363_MODE_SINGLE(1, 1 << 1),
+	MAX1363_MODE_SINGLE(2, 1 << 2),
+	MAX1363_MODE_SINGLE(3, 1 << 3),
+	MAX1363_MODE_SINGLE(4, 1 << 4),
+	MAX1363_MODE_SINGLE(5, 1 << 5),
+	MAX1363_MODE_SINGLE(6, 1 << 6),
+	MAX1363_MODE_SINGLE(7, 1 << 7),
+	MAX1363_MODE_SINGLE(8, 1 << 8),
+	MAX1363_MODE_SINGLE(9, 1 << 9),
+	MAX1363_MODE_SINGLE(10, 1 << 10),
+	MAX1363_MODE_SINGLE(11, 1 << 11),
+
+	MAX1363_MODE_DIFF_SINGLE(0, 1, 1 << 12),
+	MAX1363_MODE_DIFF_SINGLE(2, 3, 1 << 13),
+	MAX1363_MODE_DIFF_SINGLE(4, 5, 1 << 14),
+	MAX1363_MODE_DIFF_SINGLE(6, 7, 1 << 15),
+	MAX1363_MODE_DIFF_SINGLE(8, 9, 1 << 16),
+	MAX1363_MODE_DIFF_SINGLE(10, 11, 1 << 17),
+	MAX1363_MODE_DIFF_SINGLE(1, 0, 1 << 18),
+	MAX1363_MODE_DIFF_SINGLE(3, 2, 1 << 19),
+	MAX1363_MODE_DIFF_SINGLE(5, 4, 1 << 20),
+	MAX1363_MODE_DIFF_SINGLE(7, 6, 1 << 21),
+	MAX1363_MODE_DIFF_SINGLE(9, 8, 1 << 22),
+	MAX1363_MODE_DIFF_SINGLE(11, 10, 1 << 23),
+
+	/* The multichannel scans next */
+	MAX1363_MODE_SCAN_TO_CHANNEL(1, 0x003),
+	MAX1363_MODE_SCAN_TO_CHANNEL(2, 0x007),
+	MAX1236_MODE_SCAN_MID_TO_CHANNEL(2, 3, 0x00C),
+	MAX1363_MODE_SCAN_TO_CHANNEL(3, 0x00F),
+	MAX1363_MODE_SCAN_TO_CHANNEL(4, 0x01F),
+	MAX1363_MODE_SCAN_TO_CHANNEL(5, 0x03F),
+	MAX1363_MODE_SCAN_TO_CHANNEL(6, 0x07F),
+	MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 7, 0x0C0),
+	MAX1363_MODE_SCAN_TO_CHANNEL(7, 0x0FF),
+	MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 8, 0x1C0),
+	MAX1363_MODE_SCAN_TO_CHANNEL(8, 0x1FF),
+	MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 9, 0x3C0),
+	MAX1363_MODE_SCAN_TO_CHANNEL(9, 0x3FF),
+	MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 10, 0x7C0),
+	MAX1363_MODE_SCAN_TO_CHANNEL(10, 0x7FF),
+	MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 11, 0xFC0),
+	MAX1363_MODE_SCAN_TO_CHANNEL(11, 0xFFF),
+
+	MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(2, 2, 0x003000),
+	MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(4, 3, 0x007000),
+	MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(6, 4, 0x00F000),
+	MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL(8, 2, 0x018000),
+	MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(8, 5, 0x01F000),
+	MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL(10, 3, 0x038000),
+	MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(10, 6, 0x3F000),
+	MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(3, 2, 0x0C0000),
+	MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(5, 3, 0x1C0000),
+	MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(7, 4, 0x3C0000),
+	MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL(9, 2, 0x600000),
+	MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(9, 5, 0x7C0000),
+	MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL(11, 3, 0xE00000),
+	MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(11, 6, 0xFC0000),
+};
+
+static const struct max1363_mode
+*max1363_match_mode(const unsigned long *mask,
+const struct max1363_chip_info *ci)
+{
+	int i;
+	if (mask)
+		for (i = 0; i < ci->num_modes; i++)
+			if (bitmap_subset(mask,
+					  max1363_mode_table[ci->mode_list[i]].
+					  modemask,
+					  MAX1363_MAX_CHANNELS))
+				return &max1363_mode_table[ci->mode_list[i]];
+	return NULL;
+}
+
+static int max1363_write_basic_config(struct i2c_client *client,
+				      unsigned char d1,
+				      unsigned char d2)
+{
+	u8 tx_buf[2] = {d1, d2};
+
+	return i2c_master_send(client, tx_buf, 2);
+}
+
+static int max1363_set_scan_mode(struct max1363_state *st)
+{
+	st->configbyte &= ~(MAX1363_CHANNEL_SEL_MASK
+			    | MAX1363_SCAN_MASK
+			    | MAX1363_SE_DE_MASK);
+	st->configbyte |= st->current_mode->conf;
+
+	return max1363_write_basic_config(st->client,
+					  st->setupbyte,
+					  st->configbyte);
+}
+
+static int max1363_read_single_chan(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan,
+				    int *val,
+				    long m)
+{
+	int ret = 0;
+	s32 data;
+	char rxbuf[2];
+	struct max1363_state *st = iio_priv(indio_dev);
+	struct i2c_client *client = st->client;
+
+	mutex_lock(&indio_dev->mlock);
+	/*
+	 * If monitor mode is enabled, the method for reading a single
+	 * channel will have to be rather different and has not yet
+	 * been implemented.
+	 *
+	 * Also, cannot read directly if buffered capture enabled.
+	 */
+	if (st->monitor_on || iio_buffer_enabled(indio_dev)) {
+		ret = -EBUSY;
+		goto error_ret;
+	}
+
+	/* Check to see if current scan mode is correct */
+	if (st->current_mode != &max1363_mode_table[chan->address]) {
+		/* Update scan mode if needed */
+		st->current_mode = &max1363_mode_table[chan->address];
+		ret = max1363_set_scan_mode(st);
+		if (ret < 0)
+			goto error_ret;
+	}
+	if (st->chip_info->bits != 8) {
+		/* Get reading */
+		data = i2c_master_recv(client, rxbuf, 2);
+		if (data < 0) {
+			ret = data;
+			goto error_ret;
+		}
+		data = (s32)(rxbuf[1]) | ((s32)(rxbuf[0] & 0x0F)) << 8;
+	} else {
+		/* Get reading */
+		data = i2c_master_recv(client, rxbuf, 1);
+		if (data < 0) {
+			ret = data;
+			goto error_ret;
+		}
+		data = rxbuf[0];
+	}
+	*val = data;
+error_ret:
+	mutex_unlock(&indio_dev->mlock);
+	return ret;
+
+}
+
+static int max1363_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val,
+			    int *val2,
+			    long m)
+{
+	struct max1363_state *st = iio_priv(indio_dev);
+	int ret;
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		ret = max1363_read_single_chan(indio_dev, chan, val, m);
+		if (ret < 0)
+			return ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if ((1 << (st->chip_info->bits + 1)) >
+		    st->chip_info->int_vref_mv) {
+			*val = 0;
+			*val2 = 500000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		} else {
+			*val = (st->chip_info->int_vref_mv)
+				>> st->chip_info->bits;
+			return IIO_VAL_INT;
+		}
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* Applies to max1363 */
+static const enum max1363_modes max1363_mode_list[] = {
+	_s0, _s1, _s2, _s3,
+	s0to1, s0to2, s0to3,
+	d0m1, d2m3, d1m0, d3m2,
+	d0m1to2m3, d1m0to3m2,
+};
+
+#define MAX1363_EV_M						\
+	(IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)	\
+	 | IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING))
+#define MAX1363_INFO_MASK (IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			   IIO_CHAN_INFO_SCALE_SHARED_BIT)
+#define MAX1363_CHAN_U(num, addr, si, bits, evmask)			\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = num,						\
+		.address = addr,					\
+		.info_mask = MAX1363_INFO_MASK,				\
+		.datasheet_name = "AIN"#num,				\
+		.scan_type = {						\
+			.sign = 'u',					\
+			.realbits = bits,				\
+			.storagebits = (bits > 8) ? 16 : 8,		\
+			.endianness = IIO_BE,				\
+		},							\
+		.scan_index = si,					\
+		.event_mask = evmask,					\
+	}
+
+/* bipolar channel */
+#define MAX1363_CHAN_B(num, num2, addr, si, bits, evmask)		\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.differential = 1,					\
+		.indexed = 1,						\
+		.channel = num,						\
+		.channel2 = num2,					\
+		.address = addr,					\
+		.info_mask = MAX1363_INFO_MASK,				\
+		.datasheet_name = "AIN"#num"-AIN"#num2,			\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = bits,				\
+			.storagebits = (bits > 8) ? 16 : 8,		\
+			.endianness = IIO_BE,				\
+		},							\
+		.scan_index = si,					\
+		.event_mask = evmask,					\
+	}
+
+#define MAX1363_4X_CHANS(bits, em) {			\
+	MAX1363_CHAN_U(0, _s0, 0, bits, em),		\
+	MAX1363_CHAN_U(1, _s1, 1, bits, em),		\
+	MAX1363_CHAN_U(2, _s2, 2, bits, em),		\
+	MAX1363_CHAN_U(3, _s3, 3, bits, em),		\
+	MAX1363_CHAN_B(0, 1, d0m1, 4, bits, em),	\
+	MAX1363_CHAN_B(2, 3, d2m3, 5, bits, em),	\
+	MAX1363_CHAN_B(1, 0, d1m0, 6, bits, em),	\
+	MAX1363_CHAN_B(3, 2, d3m2, 7, bits, em),	\
+	IIO_CHAN_SOFT_TIMESTAMP(8)			\
+	}
+
+static const struct iio_chan_spec max1036_channels[] = MAX1363_4X_CHANS(8, 0);
+static const struct iio_chan_spec max1136_channels[] = MAX1363_4X_CHANS(10, 0);
+static const struct iio_chan_spec max1236_channels[] = MAX1363_4X_CHANS(12, 0);
+static const struct iio_chan_spec max1361_channels[] =
+	MAX1363_4X_CHANS(10, MAX1363_EV_M);
+static const struct iio_chan_spec max1363_channels[] =
+	MAX1363_4X_CHANS(12, MAX1363_EV_M);
+
+/* Applies to max1236, max1237 */
+static const enum max1363_modes max1236_mode_list[] = {
+	_s0, _s1, _s2, _s3,
+	s0to1, s0to2, s0to3,
+	d0m1, d2m3, d1m0, d3m2,
+	d0m1to2m3, d1m0to3m2,
+	s2to3,
+};
+
+/* Applies to max1238, max1239 */
+static const enum max1363_modes max1238_mode_list[] = {
+	_s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7, _s8, _s9, _s10, _s11,
+	s0to1, s0to2, s0to3, s0to4, s0to5, s0to6,
+	s0to7, s0to8, s0to9, s0to10, s0to11,
+	d0m1, d2m3, d4m5, d6m7, d8m9, d10m11,
+	d1m0, d3m2, d5m4, d7m6, d9m8, d11m10,
+	d0m1to2m3, d0m1to4m5, d0m1to6m7, d0m1to8m9, d0m1to10m11,
+	d1m0to3m2, d1m0to5m4, d1m0to7m6, d1m0to9m8, d1m0to11m10,
+	s6to7, s6to8, s6to9, s6to10, s6to11,
+	d6m7to8m9, d6m7to10m11, d7m6to9m8, d7m6to11m10,
+};
+
+#define MAX1363_12X_CHANS(bits) {			\
+	MAX1363_CHAN_U(0, _s0, 0, bits, 0),		\
+	MAX1363_CHAN_U(1, _s1, 1, bits, 0),		\
+	MAX1363_CHAN_U(2, _s2, 2, bits, 0),		\
+	MAX1363_CHAN_U(3, _s3, 3, bits, 0),		\
+	MAX1363_CHAN_U(4, _s4, 4, bits, 0),		\
+	MAX1363_CHAN_U(5, _s5, 5, bits, 0),		\
+	MAX1363_CHAN_U(6, _s6, 6, bits, 0),		\
+	MAX1363_CHAN_U(7, _s7, 7, bits, 0),		\
+	MAX1363_CHAN_U(8, _s8, 8, bits, 0),		\
+	MAX1363_CHAN_U(9, _s9, 9, bits, 0),		\
+	MAX1363_CHAN_U(10, _s10, 10, bits, 0),		\
+	MAX1363_CHAN_U(11, _s11, 11, bits, 0),		\
+	MAX1363_CHAN_B(0, 1, d0m1, 12, bits, 0),	\
+	MAX1363_CHAN_B(2, 3, d2m3, 13, bits, 0),	\
+	MAX1363_CHAN_B(4, 5, d4m5, 14, bits, 0),	\
+	MAX1363_CHAN_B(6, 7, d6m7, 15, bits, 0),	\
+	MAX1363_CHAN_B(8, 9, d8m9, 16, bits, 0),	\
+	MAX1363_CHAN_B(10, 11, d10m11, 17, bits, 0),	\
+	MAX1363_CHAN_B(1, 0, d1m0, 18, bits, 0),	\
+	MAX1363_CHAN_B(3, 2, d3m2, 19, bits, 0),	\
+	MAX1363_CHAN_B(5, 4, d5m4, 20, bits, 0),	\
+	MAX1363_CHAN_B(7, 6, d7m6, 21, bits, 0),	\
+	MAX1363_CHAN_B(9, 8, d9m8, 22, bits, 0),	\
+	MAX1363_CHAN_B(11, 10, d11m10, 23, bits, 0),	\
+	IIO_CHAN_SOFT_TIMESTAMP(24)			\
+	}
+static const struct iio_chan_spec max1038_channels[] = MAX1363_12X_CHANS(8);
+static const struct iio_chan_spec max1138_channels[] = MAX1363_12X_CHANS(10);
+static const struct iio_chan_spec max1238_channels[] = MAX1363_12X_CHANS(12);
+
+static const enum max1363_modes max11607_mode_list[] = {
+	_s0, _s1, _s2, _s3,
+	s0to1, s0to2, s0to3,
+	s2to3,
+	d0m1, d2m3, d1m0, d3m2,
+	d0m1to2m3, d1m0to3m2,
+};
+
+static const enum max1363_modes max11608_mode_list[] = {
+	_s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7,
+	s0to1, s0to2, s0to3, s0to4, s0to5, s0to6, s0to7,
+	s6to7,
+	d0m1, d2m3, d4m5, d6m7,
+	d1m0, d3m2, d5m4, d7m6,
+	d0m1to2m3, d0m1to4m5, d0m1to6m7,
+	d1m0to3m2, d1m0to5m4, d1m0to7m6,
+};
+
+#define MAX1363_8X_CHANS(bits) {			\
+	MAX1363_CHAN_U(0, _s0, 0, bits, 0),		\
+	MAX1363_CHAN_U(1, _s1, 1, bits, 0),		\
+	MAX1363_CHAN_U(2, _s2, 2, bits, 0),		\
+	MAX1363_CHAN_U(3, _s3, 3, bits, 0),		\
+	MAX1363_CHAN_U(4, _s4, 4, bits, 0),		\
+	MAX1363_CHAN_U(5, _s5, 5, bits, 0),		\
+	MAX1363_CHAN_U(6, _s6, 6, bits, 0),		\
+	MAX1363_CHAN_U(7, _s7, 7, bits, 0),		\
+	MAX1363_CHAN_B(0, 1, d0m1, 8, bits, 0),	\
+	MAX1363_CHAN_B(2, 3, d2m3, 9, bits, 0),	\
+	MAX1363_CHAN_B(4, 5, d4m5, 10, bits, 0),	\
+	MAX1363_CHAN_B(6, 7, d6m7, 11, bits, 0),	\
+	MAX1363_CHAN_B(1, 0, d1m0, 12, bits, 0),	\
+	MAX1363_CHAN_B(3, 2, d3m2, 13, bits, 0),	\
+	MAX1363_CHAN_B(5, 4, d5m4, 14, bits, 0),	\
+	MAX1363_CHAN_B(7, 6, d7m6, 15, bits, 0),	\
+	IIO_CHAN_SOFT_TIMESTAMP(16)			\
+}
+static const struct iio_chan_spec max11602_channels[] = MAX1363_8X_CHANS(8);
+static const struct iio_chan_spec max11608_channels[] = MAX1363_8X_CHANS(10);
+static const struct iio_chan_spec max11614_channels[] = MAX1363_8X_CHANS(12);
+
+static const enum max1363_modes max11644_mode_list[] = {
+	_s0, _s1, s0to1, d0m1, d1m0,
+};
+
+#define MAX1363_2X_CHANS(bits) {			\
+	MAX1363_CHAN_U(0, _s0, 0, bits, 0),		\
+	MAX1363_CHAN_U(1, _s1, 1, bits, 0),		\
+	MAX1363_CHAN_B(0, 1, d0m1, 2, bits, 0),	\
+	MAX1363_CHAN_B(1, 0, d1m0, 3, bits, 0),	\
+	IIO_CHAN_SOFT_TIMESTAMP(4)			\
+	}
+
+static const struct iio_chan_spec max11646_channels[] = MAX1363_2X_CHANS(10);
+static const struct iio_chan_spec max11644_channels[] = MAX1363_2X_CHANS(12);
+
+enum { max1361,
+       max1362,
+       max1363,
+       max1364,
+       max1036,
+       max1037,
+       max1038,
+       max1039,
+       max1136,
+       max1137,
+       max1138,
+       max1139,
+       max1236,
+       max1237,
+       max1238,
+       max1239,
+       max11600,
+       max11601,
+       max11602,
+       max11603,
+       max11604,
+       max11605,
+       max11606,
+       max11607,
+       max11608,
+       max11609,
+       max11610,
+       max11611,
+       max11612,
+       max11613,
+       max11614,
+       max11615,
+       max11616,
+       max11617,
+       max11644,
+       max11645,
+       max11646,
+       max11647
+};
+
+static const int max1363_monitor_speeds[] = { 133000, 665000, 33300, 16600,
+					      8300, 4200, 2000, 1000 };
+
+static ssize_t max1363_monitor_show_freq(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct max1363_state *st = iio_priv(dev_to_iio_dev(dev));
+	return sprintf(buf, "%d\n", max1363_monitor_speeds[st->monitor_speed]);
+}
+
+static ssize_t max1363_monitor_store_freq(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct max1363_state *st = iio_priv(indio_dev);
+	int i, ret;
+	unsigned long val;
+	bool found = false;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		return -EINVAL;
+	for (i = 0; i < ARRAY_SIZE(max1363_monitor_speeds); i++)
+		if (val == max1363_monitor_speeds[i]) {
+			found = true;
+			break;
+		}
+	if (!found)
+		return -EINVAL;
+
+	mutex_lock(&indio_dev->mlock);
+	st->monitor_speed = i;
+	mutex_unlock(&indio_dev->mlock);
+
+	return 0;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR,
+			max1363_monitor_show_freq,
+			max1363_monitor_store_freq);
+
+static IIO_CONST_ATTR(sampling_frequency_available,
+		"133000 665000 33300 16600 8300 4200 2000 1000");
+
+static int max1363_read_thresh(struct iio_dev *indio_dev,
+			       u64 event_code,
+			       int *val)
+{
+	struct max1363_state *st = iio_priv(indio_dev);
+	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_FALLING)
+		*val = st->thresh_low[IIO_EVENT_CODE_EXTRACT_CHAN(event_code)];
+	else
+		*val = st->thresh_high[IIO_EVENT_CODE_EXTRACT_CHAN(event_code)];
+	return 0;
+}
+
+static int max1363_write_thresh(struct iio_dev *indio_dev,
+				u64 event_code,
+				int val)
+{
+	struct max1363_state *st = iio_priv(indio_dev);
+	/* make it handle signed correctly as well */
+	switch (st->chip_info->bits) {
+	case 10:
+		if (val > 0x3FF)
+			return -EINVAL;
+		break;
+	case 12:
+		if (val > 0xFFF)
+			return -EINVAL;
+		break;
+	}
+
+	switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+	case IIO_EV_DIR_FALLING:
+		st->thresh_low[IIO_EVENT_CODE_EXTRACT_CHAN(event_code)] = val;
+		break;
+	case IIO_EV_DIR_RISING:
+		st->thresh_high[IIO_EVENT_CODE_EXTRACT_CHAN(event_code)] = val;
+		break;
+	}
+
+	return 0;
+}
+
+static const u64 max1363_event_codes[] = {
+	IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 0,
+			     IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING),
+	IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 1,
+			     IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING),
+	IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 2,
+			     IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING),
+	IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 3,
+			     IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING),
+	IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 0,
+			     IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING),
+	IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 1,
+			     IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING),
+	IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 2,
+			     IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING),
+	IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 3,
+			     IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING),
+};
+
+static irqreturn_t max1363_event_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct max1363_state *st = iio_priv(indio_dev);
+	s64 timestamp = iio_get_time_ns();
+	unsigned long mask, loc;
+	u8 rx;
+	u8 tx[2] = { st->setupbyte,
+		     MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0 };
+
+	i2c_master_recv(st->client, &rx, 1);
+	mask = rx;
+	for_each_set_bit(loc, &mask, 8)
+		iio_push_event(indio_dev, max1363_event_codes[loc], timestamp);
+	i2c_master_send(st->client, tx, 2);
+
+	return IRQ_HANDLED;
+}
+
+static int max1363_read_event_config(struct iio_dev *indio_dev,
+				     u64 event_code)
+{
+	struct max1363_state *st = iio_priv(indio_dev);
+	int val;
+	int number = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
+
+	mutex_lock(&indio_dev->mlock);
+	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_FALLING)
+		val = (1 << number) & st->mask_low;
+	else
+		val = (1 << number) & st->mask_high;
+	mutex_unlock(&indio_dev->mlock);
+
+	return val;
+}
+
+static int max1363_monitor_mode_update(struct max1363_state *st, int enabled)
+{
+	u8 *tx_buf;
+	int ret, i = 3, j;
+	unsigned long numelements;
+	int len;
+	const long *modemask;
+
+	if (!enabled) {
+		/* transition to buffered capture is not currently supported */
+		st->setupbyte &= ~MAX1363_SETUP_MONITOR_SETUP;
+		st->configbyte &= ~MAX1363_SCAN_MASK;
+		st->monitor_on = false;
+		return max1363_write_basic_config(st->client,
+						st->setupbyte,
+						st->configbyte);
+	}
+
+	/* Ensure we are in the relevant mode */
+	st->setupbyte |= MAX1363_SETUP_MONITOR_SETUP;
+	st->configbyte &= ~(MAX1363_CHANNEL_SEL_MASK
+			    | MAX1363_SCAN_MASK
+			| MAX1363_SE_DE_MASK);
+	st->configbyte |= MAX1363_CONFIG_SCAN_MONITOR_MODE;
+	if ((st->mask_low | st->mask_high) & 0x0F) {
+		st->configbyte |= max1363_mode_table[s0to3].conf;
+		modemask = max1363_mode_table[s0to3].modemask;
+	} else if ((st->mask_low | st->mask_high) & 0x30) {
+		st->configbyte |= max1363_mode_table[d0m1to2m3].conf;
+		modemask = max1363_mode_table[d0m1to2m3].modemask;
+	} else {
+		st->configbyte |= max1363_mode_table[d1m0to3m2].conf;
+		modemask = max1363_mode_table[d1m0to3m2].modemask;
+	}
+	numelements = bitmap_weight(modemask, MAX1363_MAX_CHANNELS);
+	len = 3 * numelements + 3;
+	tx_buf = kmalloc(len, GFP_KERNEL);
+	if (!tx_buf) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	tx_buf[0] = st->configbyte;
+	tx_buf[1] = st->setupbyte;
+	tx_buf[2] = (st->monitor_speed << 1);
+
+	/*
+	 * So we need to do yet another bit of nefarious scan mode
+	 * setup to match what we need.
+	 */
+	for (j = 0; j < 8; j++)
+		if (test_bit(j, modemask)) {
+			/* Establish the mode is in the scan */
+			if (st->mask_low & (1 << j)) {
+				tx_buf[i] = (st->thresh_low[j] >> 4) & 0xFF;
+				tx_buf[i + 1] = (st->thresh_low[j] << 4) & 0xF0;
+			} else if (j < 4) {
+				tx_buf[i] = 0;
+				tx_buf[i + 1] = 0;
+			} else {
+				tx_buf[i] = 0x80;
+				tx_buf[i + 1] = 0;
+			}
+			if (st->mask_high & (1 << j)) {
+				tx_buf[i + 1] |=
+					(st->thresh_high[j] >> 8) & 0x0F;
+				tx_buf[i + 2] = st->thresh_high[j] & 0xFF;
+			} else if (j < 4) {
+				tx_buf[i + 1] |= 0x0F;
+				tx_buf[i + 2] = 0xFF;
+			} else {
+				tx_buf[i + 1] |= 0x07;
+				tx_buf[i + 2] = 0xFF;
+			}
+			i += 3;
+		}
+
+
+	ret = i2c_master_send(st->client, tx_buf, len);
+	if (ret < 0)
+		goto error_ret;
+	if (ret != len) {
+		ret = -EIO;
+		goto error_ret;
+	}
+
+	/*
+	 * Now that we hopefully have sensible thresholds in place it is
+	 * time to turn the interrupts on.
+	 * It is unclear from the data sheet if this should be necessary
+	 * (i.e. whether monitor mode setup is atomic) but it appears to
+	 * be in practice.
+	 */
+	tx_buf[0] = st->setupbyte;
+	tx_buf[1] = MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0;
+	ret = i2c_master_send(st->client, tx_buf, 2);
+	if (ret < 0)
+		goto error_ret;
+	if (ret != 2) {
+		ret = -EIO;
+		goto error_ret;
+	}
+	ret = 0;
+	st->monitor_on = true;
+error_ret:
+
+	kfree(tx_buf);
+
+	return ret;
+}
+
+/*
+ * To keep this manageable we always use one of 3 scan modes.
+ * Scan 0...3, 0-1,2-3 and 1-0,3-2
+ */
+
+static inline int __max1363_check_event_mask(int thismask, int checkmask)
+{
+	int ret = 0;
+	/* Is it unipolar */
+	if (thismask < 4) {
+		if (checkmask & ~0x0F) {
+			ret = -EBUSY;
+			goto error_ret;
+		}
+	} else if (thismask < 6) {
+		if (checkmask & ~0x30) {
+			ret = -EBUSY;
+			goto error_ret;
+		}
+	} else if (checkmask & ~0xC0)
+		ret = -EBUSY;
+error_ret:
+	return ret;
+}
+
+static int max1363_write_event_config(struct iio_dev *indio_dev,
+				      u64 event_code,
+				      int state)
+{
+	int ret = 0;
+	struct max1363_state *st = iio_priv(indio_dev);
+	u16 unifiedmask;
+	int number = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
+
+	mutex_lock(&indio_dev->mlock);
+	unifiedmask = st->mask_low | st->mask_high;
+	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_FALLING) {
+
+		if (state == 0)
+			st->mask_low &= ~(1 << number);
+		else {
+			ret = __max1363_check_event_mask((1 << number),
+							 unifiedmask);
+			if (ret)
+				goto error_ret;
+			st->mask_low |= (1 << number);
+		}
+	} else {
+		if (state == 0)
+			st->mask_high &= ~(1 << number);
+		else {
+			ret = __max1363_check_event_mask((1 << number),
+							 unifiedmask);
+			if (ret)
+				goto error_ret;
+			st->mask_high |= (1 << number);
+		}
+	}
+
+	max1363_monitor_mode_update(st, !!(st->mask_high | st->mask_low));
+error_ret:
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+/*
+ * As with scan_elements, only certain sets of these can
+ * be combined.
+ */
+static struct attribute *max1363_event_attributes[] = {
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static struct attribute_group max1363_event_attribute_group = {
+	.attrs = max1363_event_attributes,
+	.name = "events",
+};
+
+static int max1363_update_scan_mode(struct iio_dev *indio_dev,
+				    const unsigned long *scan_mask)
+{
+	struct max1363_state *st = iio_priv(indio_dev);
+
+	/*
+	 * Need to figure out the current mode based upon the requested
+	 * scan mask in iio_dev
+	 */
+	st->current_mode = max1363_match_mode(scan_mask, st->chip_info);
+	if (!st->current_mode)
+		return -EINVAL;
+	max1363_set_scan_mode(st);
+	return 0;
+}
+
+static const struct iio_info max1238_info = {
+	.read_raw = &max1363_read_raw,
+	.driver_module = THIS_MODULE,
+	.update_scan_mode = &max1363_update_scan_mode,
+};
+
+static const struct iio_info max1363_info = {
+	.read_event_value = &max1363_read_thresh,
+	.write_event_value = &max1363_write_thresh,
+	.read_event_config = &max1363_read_event_config,
+	.write_event_config = &max1363_write_event_config,
+	.read_raw = &max1363_read_raw,
+	.update_scan_mode = &max1363_update_scan_mode,
+	.driver_module = THIS_MODULE,
+	.event_attrs = &max1363_event_attribute_group,
+};
+
+/* max1363 and max1368 tested - rest from data sheet */
+static const struct max1363_chip_info max1363_chip_info_tbl[] = {
+	[max1361] = {
+		.bits = 10,
+		.int_vref_mv = 2048,
+		.mode_list = max1363_mode_list,
+		.num_modes = ARRAY_SIZE(max1363_mode_list),
+		.default_mode = s0to3,
+		.channels = max1361_channels,
+		.num_channels = ARRAY_SIZE(max1361_channels),
+		.info = &max1363_info,
+	},
+	[max1362] = {
+		.bits = 10,
+		.int_vref_mv = 4096,
+		.mode_list = max1363_mode_list,
+		.num_modes = ARRAY_SIZE(max1363_mode_list),
+		.default_mode = s0to3,
+		.channels = max1361_channels,
+		.num_channels = ARRAY_SIZE(max1361_channels),
+		.info = &max1363_info,
+	},
+	[max1363] = {
+		.bits = 12,
+		.int_vref_mv = 2048,
+		.mode_list = max1363_mode_list,
+		.num_modes = ARRAY_SIZE(max1363_mode_list),
+		.default_mode = s0to3,
+		.channels = max1363_channels,
+		.num_channels = ARRAY_SIZE(max1363_channels),
+		.info = &max1363_info,
+	},
+	[max1364] = {
+		.bits = 12,
+		.int_vref_mv = 4096,
+		.mode_list = max1363_mode_list,
+		.num_modes = ARRAY_SIZE(max1363_mode_list),
+		.default_mode = s0to3,
+		.channels = max1363_channels,
+		.num_channels = ARRAY_SIZE(max1363_channels),
+		.info = &max1363_info,
+	},
+	[max1036] = {
+		.bits = 8,
+		.int_vref_mv = 4096,
+		.mode_list = max1236_mode_list,
+		.num_modes = ARRAY_SIZE(max1236_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1036_channels,
+		.num_channels = ARRAY_SIZE(max1036_channels),
+	},
+	[max1037] = {
+		.bits = 8,
+		.int_vref_mv = 2048,
+		.mode_list = max1236_mode_list,
+		.num_modes = ARRAY_SIZE(max1236_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1036_channels,
+		.num_channels = ARRAY_SIZE(max1036_channels),
+	},
+	[max1038] = {
+		.bits = 8,
+		.int_vref_mv = 4096,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1038_channels,
+		.num_channels = ARRAY_SIZE(max1038_channels),
+	},
+	[max1039] = {
+		.bits = 8,
+		.int_vref_mv = 2048,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1038_channels,
+		.num_channels = ARRAY_SIZE(max1038_channels),
+	},
+	[max1136] = {
+		.bits = 10,
+		.int_vref_mv = 4096,
+		.mode_list = max1236_mode_list,
+		.num_modes = ARRAY_SIZE(max1236_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1136_channels,
+		.num_channels = ARRAY_SIZE(max1136_channels),
+	},
+	[max1137] = {
+		.bits = 10,
+		.int_vref_mv = 2048,
+		.mode_list = max1236_mode_list,
+		.num_modes = ARRAY_SIZE(max1236_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1136_channels,
+		.num_channels = ARRAY_SIZE(max1136_channels),
+	},
+	[max1138] = {
+		.bits = 10,
+		.int_vref_mv = 4096,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1138_channels,
+		.num_channels = ARRAY_SIZE(max1138_channels),
+	},
+	[max1139] = {
+		.bits = 10,
+		.int_vref_mv = 2048,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1138_channels,
+		.num_channels = ARRAY_SIZE(max1138_channels),
+	},
+	[max1236] = {
+		.bits = 12,
+		.int_vref_mv = 4096,
+		.mode_list = max1236_mode_list,
+		.num_modes = ARRAY_SIZE(max1236_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1236_channels,
+		.num_channels = ARRAY_SIZE(max1236_channels),
+	},
+	[max1237] = {
+		.bits = 12,
+		.int_vref_mv = 2048,
+		.mode_list = max1236_mode_list,
+		.num_modes = ARRAY_SIZE(max1236_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1236_channels,
+		.num_channels = ARRAY_SIZE(max1236_channels),
+	},
+	[max1238] = {
+		.bits = 12,
+		.int_vref_mv = 4096,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1238_channels,
+		.num_channels = ARRAY_SIZE(max1238_channels),
+	},
+	[max1239] = {
+		.bits = 12,
+		.int_vref_mv = 2048,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1238_channels,
+		.num_channels = ARRAY_SIZE(max1238_channels),
+	},
+	[max11600] = {
+		.bits = 8,
+		.int_vref_mv = 4096,
+		.mode_list = max11607_mode_list,
+		.num_modes = ARRAY_SIZE(max11607_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1036_channels,
+		.num_channels = ARRAY_SIZE(max1036_channels),
+	},
+	[max11601] = {
+		.bits = 8,
+		.int_vref_mv = 2048,
+		.mode_list = max11607_mode_list,
+		.num_modes = ARRAY_SIZE(max11607_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1036_channels,
+		.num_channels = ARRAY_SIZE(max1036_channels),
+	},
+	[max11602] = {
+		.bits = 8,
+		.int_vref_mv = 4096,
+		.mode_list = max11608_mode_list,
+		.num_modes = ARRAY_SIZE(max11608_mode_list),
+		.default_mode = s0to7,
+		.info = &max1238_info,
+		.channels = max11602_channels,
+		.num_channels = ARRAY_SIZE(max11602_channels),
+	},
+	[max11603] = {
+		.bits = 8,
+		.int_vref_mv = 2048,
+		.mode_list = max11608_mode_list,
+		.num_modes = ARRAY_SIZE(max11608_mode_list),
+		.default_mode = s0to7,
+		.info = &max1238_info,
+		.channels = max11602_channels,
+		.num_channels = ARRAY_SIZE(max11602_channels),
+	},
+	[max11604] = {
+		.bits = 8,
+		.int_vref_mv = 4098,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1238_channels,
+		.num_channels = ARRAY_SIZE(max1238_channels),
+	},
+	[max11605] = {
+		.bits = 8,
+		.int_vref_mv = 2048,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1238_channels,
+		.num_channels = ARRAY_SIZE(max1238_channels),
+	},
+	[max11606] = {
+		.bits = 10,
+		.int_vref_mv = 4096,
+		.mode_list = max11607_mode_list,
+		.num_modes = ARRAY_SIZE(max11607_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1136_channels,
+		.num_channels = ARRAY_SIZE(max1136_channels),
+	},
+	[max11607] = {
+		.bits = 10,
+		.int_vref_mv = 2048,
+		.mode_list = max11607_mode_list,
+		.num_modes = ARRAY_SIZE(max11607_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1136_channels,
+		.num_channels = ARRAY_SIZE(max1136_channels),
+	},
+	[max11608] = {
+		.bits = 10,
+		.int_vref_mv = 4096,
+		.mode_list = max11608_mode_list,
+		.num_modes = ARRAY_SIZE(max11608_mode_list),
+		.default_mode = s0to7,
+		.info = &max1238_info,
+		.channels = max11608_channels,
+		.num_channels = ARRAY_SIZE(max11608_channels),
+	},
+	[max11609] = {
+		.bits = 10,
+		.int_vref_mv = 2048,
+		.mode_list = max11608_mode_list,
+		.num_modes = ARRAY_SIZE(max11608_mode_list),
+		.default_mode = s0to7,
+		.info = &max1238_info,
+		.channels = max11608_channels,
+		.num_channels = ARRAY_SIZE(max11608_channels),
+	},
+	[max11610] = {
+		.bits = 10,
+		.int_vref_mv = 4098,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1238_channels,
+		.num_channels = ARRAY_SIZE(max1238_channels),
+	},
+	[max11611] = {
+		.bits = 10,
+		.int_vref_mv = 2048,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1238_channels,
+		.num_channels = ARRAY_SIZE(max1238_channels),
+	},
+	[max11612] = {
+		.bits = 12,
+		.int_vref_mv = 4096,
+		.mode_list = max11607_mode_list,
+		.num_modes = ARRAY_SIZE(max11607_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1363_channels,
+		.num_channels = ARRAY_SIZE(max1363_channels),
+	},
+	[max11613] = {
+		.bits = 12,
+		.int_vref_mv = 2048,
+		.mode_list = max11607_mode_list,
+		.num_modes = ARRAY_SIZE(max11607_mode_list),
+		.default_mode = s0to3,
+		.info = &max1238_info,
+		.channels = max1363_channels,
+		.num_channels = ARRAY_SIZE(max1363_channels),
+	},
+	[max11614] = {
+		.bits = 12,
+		.int_vref_mv = 4096,
+		.mode_list = max11608_mode_list,
+		.num_modes = ARRAY_SIZE(max11608_mode_list),
+		.default_mode = s0to7,
+		.info = &max1238_info,
+		.channels = max11614_channels,
+		.num_channels = ARRAY_SIZE(max11614_channels),
+	},
+	[max11615] = {
+		.bits = 12,
+		.int_vref_mv = 2048,
+		.mode_list = max11608_mode_list,
+		.num_modes = ARRAY_SIZE(max11608_mode_list),
+		.default_mode = s0to7,
+		.info = &max1238_info,
+		.channels = max11614_channels,
+		.num_channels = ARRAY_SIZE(max11614_channels),
+	},
+	[max11616] = {
+		.bits = 12,
+		.int_vref_mv = 4098,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1238_channels,
+		.num_channels = ARRAY_SIZE(max1238_channels),
+	},
+	[max11617] = {
+		.bits = 12,
+		.int_vref_mv = 2048,
+		.mode_list = max1238_mode_list,
+		.num_modes = ARRAY_SIZE(max1238_mode_list),
+		.default_mode = s0to11,
+		.info = &max1238_info,
+		.channels = max1238_channels,
+		.num_channels = ARRAY_SIZE(max1238_channels),
+	},
+	[max11644] = {
+		.bits = 12,
+		.int_vref_mv = 2048,
+		.mode_list = max11644_mode_list,
+		.num_modes = ARRAY_SIZE(max11644_mode_list),
+		.default_mode = s0to1,
+		.info = &max1238_info,
+		.channels = max11644_channels,
+		.num_channels = ARRAY_SIZE(max11644_channels),
+	},
+	[max11645] = {
+		.bits = 12,
+		.int_vref_mv = 4096,
+		.mode_list = max11644_mode_list,
+		.num_modes = ARRAY_SIZE(max11644_mode_list),
+		.default_mode = s0to1,
+		.info = &max1238_info,
+		.channels = max11644_channels,
+		.num_channels = ARRAY_SIZE(max11644_channels),
+	},
+	[max11646] = {
+		.bits = 10,
+		.int_vref_mv = 2048,
+		.mode_list = max11644_mode_list,
+		.num_modes = ARRAY_SIZE(max11644_mode_list),
+		.default_mode = s0to1,
+		.info = &max1238_info,
+		.channels = max11646_channels,
+		.num_channels = ARRAY_SIZE(max11646_channels),
+	},
+	[max11647] = {
+		.bits = 10,
+		.int_vref_mv = 4096,
+		.mode_list = max11644_mode_list,
+		.num_modes = ARRAY_SIZE(max11644_mode_list),
+		.default_mode = s0to1,
+		.info = &max1238_info,
+		.channels = max11646_channels,
+		.num_channels = ARRAY_SIZE(max11646_channels),
+	},
+};
+
+static int max1363_initial_setup(struct max1363_state *st)
+{
+	st->setupbyte = MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_VDD
+		| MAX1363_SETUP_POWER_UP_INT_REF
+		| MAX1363_SETUP_INT_CLOCK
+		| MAX1363_SETUP_UNIPOLAR
+		| MAX1363_SETUP_NORESET;
+
+	/* Set scan mode writes the config anyway so wait until then*/
+	st->setupbyte = MAX1363_SETUP_BYTE(st->setupbyte);
+	st->current_mode = &max1363_mode_table[st->chip_info->default_mode];
+	st->configbyte = MAX1363_CONFIG_BYTE(st->configbyte);
+
+	return max1363_set_scan_mode(st);
+}
+
+static int __devinit max1363_alloc_scan_masks(struct iio_dev *indio_dev)
+{
+	struct max1363_state *st = iio_priv(indio_dev);
+	unsigned long *masks;
+	int i;
+
+	masks = kzalloc(BITS_TO_LONGS(MAX1363_MAX_CHANNELS)*sizeof(long)*
+			  (st->chip_info->num_modes + 1), GFP_KERNEL);
+	if (!masks)
+		return -ENOMEM;
+
+	for (i = 0; i < st->chip_info->num_modes; i++)
+		bitmap_copy(masks + BITS_TO_LONGS(MAX1363_MAX_CHANNELS)*i,
+			    max1363_mode_table[st->chip_info->mode_list[i]]
+			    .modemask, MAX1363_MAX_CHANNELS);
+
+	indio_dev->available_scan_masks = masks;
+
+	return 0;
+}
+
+
+static irqreturn_t max1363_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct max1363_state *st = iio_priv(indio_dev);
+	s64 time_ns;
+	__u8 *rxbuf;
+	int b_sent;
+	size_t d_size;
+	unsigned long numvals = bitmap_weight(st->current_mode->modemask,
+					      MAX1363_MAX_CHANNELS);
+
+	/* Ensure the timestamp is 8 byte aligned */
+	if (st->chip_info->bits != 8)
+		d_size = numvals*2;
+	else
+		d_size = numvals;
+	if (indio_dev->scan_timestamp) {
+		d_size += sizeof(s64);
+		if (d_size % sizeof(s64))
+			d_size += sizeof(s64) - (d_size % sizeof(s64));
+	}
+	/* Monitor mode prevents reading. Whilst not currently implemented
+	 * might as well have this test in here in the meantime as it does
+	 * no harm.
+	 */
+	if (numvals == 0)
+		goto done;
+
+	rxbuf = kmalloc(d_size,	GFP_KERNEL);
+	if (rxbuf == NULL)
+		goto done;
+	if (st->chip_info->bits != 8)
+		b_sent = i2c_master_recv(st->client, rxbuf, numvals*2);
+	else
+		b_sent = i2c_master_recv(st->client, rxbuf, numvals);
+	if (b_sent < 0)
+		goto done_free;
+
+	time_ns = iio_get_time_ns();
+
+	if (indio_dev->scan_timestamp)
+		memcpy(rxbuf + d_size - sizeof(s64), &time_ns, sizeof(time_ns));
+	iio_push_to_buffers(indio_dev, rxbuf);
+
+done_free:
+	kfree(rxbuf);
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_buffer_setup_ops max1363_buffered_setup_ops = {
+	.postenable = &iio_triggered_buffer_postenable,
+	.preenable = &iio_sw_buffer_preenable,
+	.predisable = &iio_triggered_buffer_predisable,
+};
+
+static int max1363_register_buffered_funcs_and_init(struct iio_dev *indio_dev)
+{
+	struct max1363_state *st = iio_priv(indio_dev);
+	int ret = 0;
+
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
+	if (!indio_dev->buffer) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	indio_dev->pollfunc = iio_alloc_pollfunc(NULL,
+						 &max1363_trigger_handler,
+						 IRQF_ONESHOT,
+						 indio_dev,
+						 "%s_consumer%d",
+						 st->client->name,
+						 indio_dev->id);
+	if (indio_dev->pollfunc == NULL) {
+		ret = -ENOMEM;
+		goto error_deallocate_sw_rb;
+	}
+	/* Buffer functions - here trigger setup related */
+	indio_dev->setup_ops = &max1363_buffered_setup_ops;
+
+	/* Flag that polled buffering is possible */
+	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
+
+	return 0;
+
+error_deallocate_sw_rb:
+	iio_kfifo_free(indio_dev->buffer);
+error_ret:
+	return ret;
+}
+
+static void max1363_buffer_cleanup(struct iio_dev *indio_dev)
+{
+	/* ensure that the trigger has been detached */
+	iio_dealloc_pollfunc(indio_dev->pollfunc);
+	iio_kfifo_free(indio_dev->buffer);
+}
+
+static int __devinit max1363_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	int ret;
+	struct max1363_state *st;
+	struct iio_dev *indio_dev;
+
+	indio_dev = iio_device_alloc(sizeof(struct max1363_state));
+	if (indio_dev == NULL) {
+		ret = -ENOMEM;
+		goto error_out;
+	}
+
+	ret = iio_map_array_register(indio_dev, client->dev.platform_data);
+	if (ret < 0)
+		goto error_free_device;
+
+	st = iio_priv(indio_dev);
+
+	st->reg = regulator_get(&client->dev, "vcc");
+	if (IS_ERR(st->reg)) {
+		ret = PTR_ERR(st->reg);
+		goto error_unregister_map;
+	}
+
+	ret = regulator_enable(st->reg);
+	if (ret)
+		goto error_put_reg;
+
+	/* this is only used for device removal purposes */
+	i2c_set_clientdata(client, indio_dev);
+
+	st->chip_info = &max1363_chip_info_tbl[id->driver_data];
+	st->client = client;
+
+	ret = max1363_alloc_scan_masks(indio_dev);
+	if (ret)
+		goto error_disable_reg;
+
+	/* Estabilish that the iio_dev is a child of the i2c device */
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = id->name;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = st->chip_info->num_channels;
+	indio_dev->info = st->chip_info->info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = st->chip_info->num_channels;
+	ret = max1363_initial_setup(st);
+	if (ret < 0)
+		goto error_free_available_scan_masks;
+
+	ret = max1363_register_buffered_funcs_and_init(indio_dev);
+	if (ret)
+		goto error_free_available_scan_masks;
+
+	ret = iio_buffer_register(indio_dev,
+				  st->chip_info->channels,
+				  st->chip_info->num_channels);
+	if (ret)
+		goto error_cleanup_buffer;
+
+	if (client->irq) {
+		ret = request_threaded_irq(st->client->irq,
+					   NULL,
+					   &max1363_event_handler,
+					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					   "max1363_event",
+					   indio_dev);
+
+		if (ret)
+			goto error_uninit_buffer;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto error_free_irq;
+
+	return 0;
+error_free_irq:
+	free_irq(st->client->irq, indio_dev);
+error_uninit_buffer:
+	iio_buffer_unregister(indio_dev);
+error_cleanup_buffer:
+	max1363_buffer_cleanup(indio_dev);
+error_free_available_scan_masks:
+	kfree(indio_dev->available_scan_masks);
+error_unregister_map:
+	iio_map_array_unregister(indio_dev, client->dev.platform_data);
+error_disable_reg:
+	regulator_disable(st->reg);
+error_put_reg:
+	regulator_put(st->reg);
+error_free_device:
+	iio_device_free(indio_dev);
+error_out:
+	return ret;
+}
+
+static int __devexit max1363_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct max1363_state *st = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	if (client->irq)
+		free_irq(st->client->irq, indio_dev);
+	iio_buffer_unregister(indio_dev);
+	max1363_buffer_cleanup(indio_dev);
+	kfree(indio_dev->available_scan_masks);
+	if (!IS_ERR(st->reg)) {
+		regulator_disable(st->reg);
+		regulator_put(st->reg);
+	}
+	iio_map_array_unregister(indio_dev, client->dev.platform_data);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id max1363_id[] = {
+	{ "max1361", max1361 },
+	{ "max1362", max1362 },
+	{ "max1363", max1363 },
+	{ "max1364", max1364 },
+	{ "max1036", max1036 },
+	{ "max1037", max1037 },
+	{ "max1038", max1038 },
+	{ "max1039", max1039 },
+	{ "max1136", max1136 },
+	{ "max1137", max1137 },
+	{ "max1138", max1138 },
+	{ "max1139", max1139 },
+	{ "max1236", max1236 },
+	{ "max1237", max1237 },
+	{ "max1238", max1238 },
+	{ "max1239", max1239 },
+	{ "max11600", max11600 },
+	{ "max11601", max11601 },
+	{ "max11602", max11602 },
+	{ "max11603", max11603 },
+	{ "max11604", max11604 },
+	{ "max11605", max11605 },
+	{ "max11606", max11606 },
+	{ "max11607", max11607 },
+	{ "max11608", max11608 },
+	{ "max11609", max11609 },
+	{ "max11610", max11610 },
+	{ "max11611", max11611 },
+	{ "max11612", max11612 },
+	{ "max11613", max11613 },
+	{ "max11614", max11614 },
+	{ "max11615", max11615 },
+	{ "max11616", max11616 },
+	{ "max11617", max11617 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, max1363_id);
+
+static struct i2c_driver max1363_driver = {
+	.driver = {
+		.name = "max1363",
+	},
+	.probe = max1363_probe,
+	.remove = __devexit_p(max1363_remove),
+	.id_table = max1363_id,
+};
+module_i2c_driver(max1363_driver);
+
+MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
+MODULE_DESCRIPTION("Maxim 1363 ADC");
+MODULE_LICENSE("GPL v2");