summaryrefslogtreecommitdiff
path: root/drivers/dma
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@stericsson.com>2010-03-02 20:12:46 +0100
committerDan Williams <dan.j.williams@intel.com>2010-03-02 14:17:46 -0700
commit516fd4305e5f5718475e81fe5c17c95888a8157b (patch)
tree33d6648233b48178d58426d1659fd1234d9f95b0 /drivers/dma
parent0b58828c923e57f1bfbbd2c4277ceb60666314fa (diff)
downloadlinux-3.10-516fd4305e5f5718475e81fe5c17c95888a8157b.tar.gz
linux-3.10-516fd4305e5f5718475e81fe5c17c95888a8157b.tar.bz2
linux-3.10-516fd4305e5f5718475e81fe5c17c95888a8157b.zip
DMAENGINE: COH 901 318 configure channel direction
This makes the COH 901 318 configure channel direction (to or from device) dynamically, instead of being passed in from the platform data. This was necessary in order to get the MMC/SD-card channel bidirectional (all other channels on the U300 were either RX or TX but this one was both). This also sets memcpy() alignent to even 2^2 (32bit) boundaries, which makes the memcpy() stress tests start working. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Diffstat (limited to 'drivers/dma')
-rw-r--r--drivers/dma/coh901318.c14
1 files changed, 14 insertions, 0 deletions
diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c
index 544c46278f8..1656fdcdb6c 100644
--- a/drivers/dma/coh901318.c
+++ b/drivers/dma/coh901318.c
@@ -928,6 +928,7 @@ coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
struct coh901318_chan *cohc = to_coh901318_chan(chan);
struct coh901318_lli *data;
struct coh901318_desc *cohd;
+ const struct coh901318_params *params;
struct scatterlist *sg;
int len = 0;
int size;
@@ -935,6 +936,7 @@ coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
u32 ctrl_chained = cohc_chan_param(cohc)->ctrl_lli_chained;
u32 ctrl = cohc_chan_param(cohc)->ctrl_lli;
u32 ctrl_last = cohc_chan_param(cohc)->ctrl_lli_last;
+ u32 config;
unsigned long flg;
int ret;
@@ -952,10 +954,14 @@ coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
/* Trigger interrupt after last lli */
ctrl_last |= COH901318_CX_CTRL_TC_IRQ_ENABLE;
+ params = cohc_chan_param(cohc);
+ config = params->config;
+
if (direction == DMA_TO_DEVICE) {
u32 tx_flags = COH901318_CX_CTRL_PRDD_SOURCE |
COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE;
+ config |= COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY;
ctrl_chained |= tx_flags;
ctrl_last |= tx_flags;
ctrl |= tx_flags;
@@ -963,12 +969,15 @@ coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
u32 rx_flags = COH901318_CX_CTRL_PRDD_DEST |
COH901318_CX_CTRL_DST_ADDR_INC_ENABLE;
+ config |= COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY;
ctrl_chained |= rx_flags;
ctrl_last |= rx_flags;
ctrl |= rx_flags;
} else
goto err_direction;
+ coh901318_set_conf(cohc, config);
+
/* The dma only supports transmitting packages up to
* MAX_DMA_PACKET_SIZE. Calculate to total number of
* dma elemts required to send the entire sg list
@@ -1250,6 +1259,11 @@ static int __init coh901318_probe(struct platform_device *pdev)
base->dma_memcpy.device_issue_pending = coh901318_issue_pending;
base->dma_memcpy.device_terminate_all = coh901318_terminate_all;
base->dma_memcpy.dev = &pdev->dev;
+ /*
+ * This controller can only access address at even 32bit boundaries,
+ * i.e. 2^2
+ */
+ base->dma_memcpy.copy_align = 2;
err = dma_async_device_register(&base->dma_memcpy);
if (err)