Move libata to drivers/ata.

1 files changed, 723 insertions, 0 deletions

diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
new file mode 100644
index 00000000000..907faa87239
--- /dev/null
+++ b/drivers/ata/sata_sil.c
@@ -0,0 +1,723 @@
+/*
+ *  sata_sil.c - Silicon Image SATA
+ *
+ *  Maintained by:  Jeff Garzik <jgarzik@pobox.com>
+ *  		    Please ALWAYS copy linux-ide@vger.kernel.org
+ *		    on emails.
+ *
+ *  Copyright 2003-2005 Red Hat, Inc.
+ *  Copyright 2003 Benjamin Herrenschmidt
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ *  libata documentation is available via 'make {ps|pdf}docs',
+ *  as Documentation/DocBook/libata.*
+ *
+ *  Documentation for SiI 3112:
+ *  http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
+ *
+ *  Other errata and documentation available under NDA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME	"sata_sil"
+#define DRV_VERSION	"2.0"
+
+enum {
+	/*
+	 * host flags
+	 */
+	SIL_FLAG_NO_SATA_IRQ	= (1 << 28),
+	SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
+	SIL_FLAG_MOD15WRITE	= (1 << 30),
+
+	SIL_DFL_HOST_FLAGS	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME,
+
+	/*
+	 * Controller IDs
+	 */
+	sil_3112		= 0,
+	sil_3112_no_sata_irq	= 1,
+	sil_3512		= 2,
+	sil_3114		= 3,
+
+	/*
+	 * Register offsets
+	 */
+	SIL_SYSCFG		= 0x48,
+
+	/*
+	 * Register bits
+	 */
+	/* SYSCFG */
+	SIL_MASK_IDE0_INT	= (1 << 22),
+	SIL_MASK_IDE1_INT	= (1 << 23),
+	SIL_MASK_IDE2_INT	= (1 << 24),
+	SIL_MASK_IDE3_INT	= (1 << 25),
+	SIL_MASK_2PORT		= SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT,
+	SIL_MASK_4PORT		= SIL_MASK_2PORT |
+				  SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT,
+
+	/* BMDMA/BMDMA2 */
+	SIL_INTR_STEERING	= (1 << 1),
+
+	SIL_DMA_ENABLE		= (1 << 0),  /* DMA run switch */
+	SIL_DMA_RDWR		= (1 << 3),  /* DMA Rd-Wr */
+	SIL_DMA_SATA_IRQ	= (1 << 4),  /* OR of all SATA IRQs */
+	SIL_DMA_ACTIVE		= (1 << 16), /* DMA running */
+	SIL_DMA_ERROR		= (1 << 17), /* PCI bus error */
+	SIL_DMA_COMPLETE	= (1 << 18), /* cmd complete / IRQ pending */
+	SIL_DMA_N_SATA_IRQ	= (1 << 6),  /* SATA_IRQ for the next channel */
+	SIL_DMA_N_ACTIVE	= (1 << 24), /* ACTIVE for the next channel */
+	SIL_DMA_N_ERROR		= (1 << 25), /* ERROR for the next channel */
+	SIL_DMA_N_COMPLETE	= (1 << 26), /* COMPLETE for the next channel */
+
+	/* SIEN */
+	SIL_SIEN_N		= (1 << 16), /* triggered by SError.N */
+
+	/*
+	 * Others
+	 */
+	SIL_QUIRK_MOD15WRITE	= (1 << 0),
+	SIL_QUIRK_UDMA5MAX	= (1 << 1),
+};
+
+static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int sil_pci_device_resume(struct pci_dev *pdev);
+static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
+static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
+static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static void sil_post_set_mode (struct ata_port *ap);
+static irqreturn_t sil_interrupt(int irq, void *dev_instance,
+				 struct pt_regs *regs);
+static void sil_freeze(struct ata_port *ap);
+static void sil_thaw(struct ata_port *ap);
+
+
+static const struct pci_device_id sil_pci_tbl[] = {
+	{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+	{ 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+	{ 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
+	{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
+	{ 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+	{ 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq },
+	{ 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq },
+	{ }	/* terminate list */
+};
+
+
+/* TODO firmware versions should be added - eric */
+static const struct sil_drivelist {
+	const char * product;
+	unsigned int quirk;
+} sil_blacklist [] = {
+	{ "ST320012AS",		SIL_QUIRK_MOD15WRITE },
+	{ "ST330013AS",		SIL_QUIRK_MOD15WRITE },
+	{ "ST340017AS",		SIL_QUIRK_MOD15WRITE },
+	{ "ST360015AS",		SIL_QUIRK_MOD15WRITE },
+	{ "ST380023AS",		SIL_QUIRK_MOD15WRITE },
+	{ "ST3120023AS",	SIL_QUIRK_MOD15WRITE },
+	{ "ST340014ASL",	SIL_QUIRK_MOD15WRITE },
+	{ "ST360014ASL",	SIL_QUIRK_MOD15WRITE },
+	{ "ST380011ASL",	SIL_QUIRK_MOD15WRITE },
+	{ "ST3120022ASL",	SIL_QUIRK_MOD15WRITE },
+	{ "ST3160021ASL",	SIL_QUIRK_MOD15WRITE },
+	{ "Maxtor 4D060H3",	SIL_QUIRK_UDMA5MAX },
+	{ }
+};
+
+static struct pci_driver sil_pci_driver = {
+	.name			= DRV_NAME,
+	.id_table		= sil_pci_tbl,
+	.probe			= sil_init_one,
+	.remove			= ata_pci_remove_one,
+	.suspend		= ata_pci_device_suspend,
+	.resume			= sil_pci_device_resume,
+};
+
+static struct scsi_host_template sil_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
+	.bios_param		= ata_std_bios_param,
+	.suspend		= ata_scsi_device_suspend,
+	.resume			= ata_scsi_device_resume,
+};
+
+static const struct ata_port_operations sil_ops = {
+	.port_disable		= ata_port_disable,
+	.dev_config		= sil_dev_config,
+	.tf_load		= ata_tf_load,
+	.tf_read		= ata_tf_read,
+	.check_status		= ata_check_status,
+	.exec_command		= ata_exec_command,
+	.dev_select		= ata_std_dev_select,
+	.post_set_mode		= sil_post_set_mode,
+	.bmdma_setup            = ata_bmdma_setup,
+	.bmdma_start            = ata_bmdma_start,
+	.bmdma_stop		= ata_bmdma_stop,
+	.bmdma_status		= ata_bmdma_status,
+	.qc_prep		= ata_qc_prep,
+	.qc_issue		= ata_qc_issue_prot,
+	.data_xfer		= ata_mmio_data_xfer,
+	.freeze			= sil_freeze,
+	.thaw			= sil_thaw,
+	.error_handler		= ata_bmdma_error_handler,
+	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.irq_handler		= sil_interrupt,
+	.irq_clear		= ata_bmdma_irq_clear,
+	.scr_read		= sil_scr_read,
+	.scr_write		= sil_scr_write,
+	.port_start		= ata_port_start,
+	.port_stop		= ata_port_stop,
+	.host_stop		= ata_pci_host_stop,
+};
+
+static const struct ata_port_info sil_port_info[] = {
+	/* sil_3112 */
+	{
+		.sht		= &sil_sht,
+		.host_flags	= SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE,
+		.pio_mask	= 0x1f,			/* pio0-4 */
+		.mwdma_mask	= 0x07,			/* mwdma0-2 */
+		.udma_mask	= 0x3f,			/* udma0-5 */
+		.port_ops	= &sil_ops,
+	},
+	/* sil_3112_no_sata_irq */
+	{
+		.sht		= &sil_sht,
+		.host_flags	= SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE |
+				  SIL_FLAG_NO_SATA_IRQ,
+		.pio_mask	= 0x1f,			/* pio0-4 */
+		.mwdma_mask	= 0x07,			/* mwdma0-2 */
+		.udma_mask	= 0x3f,			/* udma0-5 */
+		.port_ops	= &sil_ops,
+	},
+	/* sil_3512 */
+	{
+		.sht		= &sil_sht,
+		.host_flags	= SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
+		.pio_mask	= 0x1f,			/* pio0-4 */
+		.mwdma_mask	= 0x07,			/* mwdma0-2 */
+		.udma_mask	= 0x3f,			/* udma0-5 */
+		.port_ops	= &sil_ops,
+	},
+	/* sil_3114 */
+	{
+		.sht		= &sil_sht,
+		.host_flags	= SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
+		.pio_mask	= 0x1f,			/* pio0-4 */
+		.mwdma_mask	= 0x07,			/* mwdma0-2 */
+		.udma_mask	= 0x3f,			/* udma0-5 */
+		.port_ops	= &sil_ops,
+	},
+};
+
+/* per-port register offsets */
+/* TODO: we can probably calculate rather than use a table */
+static const struct {
+	unsigned long tf;	/* ATA taskfile register block */
+	unsigned long ctl;	/* ATA control/altstatus register block */
+	unsigned long bmdma;	/* DMA register block */
+	unsigned long bmdma2;	/* DMA register block #2 */
+	unsigned long fifo_cfg;	/* FIFO Valid Byte Count and Control */
+	unsigned long scr;	/* SATA control register block */
+	unsigned long sien;	/* SATA Interrupt Enable register */
+	unsigned long xfer_mode;/* data transfer mode register */
+	unsigned long sfis_cfg;	/* SATA FIS reception config register */
+} sil_port[] = {
+	/* port 0 ... */
+	{ 0x80, 0x8A, 0x00, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c },
+	{ 0xC0, 0xCA, 0x08, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc },
+	{ 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c },
+	{ 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc },
+	/* ... port 3 */
+};
+
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+static int slow_down = 0;
+module_param(slow_down, int, 0444);
+MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
+
+
+static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
+{
+	u8 cache_line = 0;
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line);
+	return cache_line;
+}
+
+static void sil_post_set_mode (struct ata_port *ap)
+{
+	struct ata_host_set *host_set = ap->host_set;
+	struct ata_device *dev;
+	void __iomem *addr =
+		host_set->mmio_base + sil_port[ap->port_no].xfer_mode;
+	u32 tmp, dev_mode[2];
+	unsigned int i;
+
+	for (i = 0; i < 2; i++) {
+		dev = &ap->device[i];
+		if (!ata_dev_enabled(dev))
+			dev_mode[i] = 0;	/* PIO0/1/2 */
+		else if (dev->flags & ATA_DFLAG_PIO)
+			dev_mode[i] = 1;	/* PIO3/4 */
+		else
+			dev_mode[i] = 3;	/* UDMA */
+		/* value 2 indicates MDMA */
+	}
+
+	tmp = readl(addr);
+	tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0));
+	tmp |= dev_mode[0];
+	tmp |= (dev_mode[1] << 4);
+	writel(tmp, addr);
+	readl(addr);	/* flush */
+}
+
+static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)
+{
+	unsigned long offset = ap->ioaddr.scr_addr;
+
+	switch (sc_reg) {
+	case SCR_STATUS:
+		return offset + 4;
+	case SCR_ERROR:
+		return offset + 8;
+	case SCR_CONTROL:
+		return offset;
+	default:
+		/* do nothing */
+		break;
+	}
+
+	return 0;
+}
+
+static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
+{
+	void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
+	if (mmio)
+		return readl(mmio);
+	return 0xffffffffU;
+}
+
+static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+{
+	void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
+	if (mmio)
+		writel(val, mmio);
+}
+
+static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
+{
+	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+	u8 status;
+
+	if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) {
+		u32 serror;
+
+		/* SIEN doesn't mask SATA IRQs on some 3112s.  Those
+		 * controllers continue to assert IRQ as long as
+		 * SError bits are pending.  Clear SError immediately.
+		 */
+		serror = sil_scr_read(ap, SCR_ERROR);
+		sil_scr_write(ap, SCR_ERROR, serror);
+
+		/* Trigger hotplug and accumulate SError only if the
+		 * port isn't already frozen.  Otherwise, PHY events
+		 * during hardreset makes controllers with broken SIEN
+		 * repeat probing needlessly.
+		 */
+		if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
+			ata_ehi_hotplugged(&ap->eh_info);
+			ap->eh_info.serror |= serror;
+		}
+
+		goto freeze;
+	}
+
+	if (unlikely(!qc || qc->tf.ctl & ATA_NIEN))
+		goto freeze;
+
+	/* Check whether we are expecting interrupt in this state */
+	switch (ap->hsm_task_state) {
+	case HSM_ST_FIRST:
+		/* Some pre-ATAPI-4 devices assert INTRQ
+		 * at this state when ready to receive CDB.
+		 */
+
+		/* Check the ATA_DFLAG_CDB_INTR flag is enough here.
+		 * The flag was turned on only for atapi devices.
+		 * No need to check is_atapi_taskfile(&qc->tf) again.
+		 */
+		if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+			goto err_hsm;
+		break;
+	case HSM_ST_LAST:
+		if (qc->tf.protocol == ATA_PROT_DMA ||
+		    qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+			/* clear DMA-Start bit */
+			ap->ops->bmdma_stop(qc);
+
+			if (bmdma2 & SIL_DMA_ERROR) {
+				qc->err_mask |= AC_ERR_HOST_BUS;
+				ap->hsm_task_state = HSM_ST_ERR;
+			}
+		}
+		break;
+	case HSM_ST:
+		break;
+	default:
+		goto err_hsm;
+	}
+
+	/* check main status, clearing INTRQ */
+	status = ata_chk_status(ap);
+	if (unlikely(status & ATA_BUSY))
+		goto err_hsm;
+
+	/* ack bmdma irq events */
+	ata_bmdma_irq_clear(ap);
+
+	/* kick HSM in the ass */
+	ata_hsm_move(ap, qc, status, 0);
+
+	return;
+
+ err_hsm:
+	qc->err_mask |= AC_ERR_HSM;
+ freeze:
+	ata_port_freeze(ap);
+}
+
+static irqreturn_t sil_interrupt(int irq, void *dev_instance,
+				 struct pt_regs *regs)
+{
+	struct ata_host_set *host_set = dev_instance;
+	void __iomem *mmio_base = host_set->mmio_base;
+	int handled = 0;
+	int i;
+
+	spin_lock(&host_set->lock);
+
+	for (i = 0; i < host_set->n_ports; i++) {
+		struct ata_port *ap = host_set->ports[i];
+		u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2);
+
+		if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
+			continue;
+
+		/* turn off SATA_IRQ if not supported */
+		if (ap->flags & SIL_FLAG_NO_SATA_IRQ)
+			bmdma2 &= ~SIL_DMA_SATA_IRQ;
+
+		if (bmdma2 == 0xffffffff ||
+		    !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ)))
+			continue;
+
+		sil_host_intr(ap, bmdma2);
+		handled = 1;
+	}
+
+	spin_unlock(&host_set->lock);
+
+	return IRQ_RETVAL(handled);
+}
+
+static void sil_freeze(struct ata_port *ap)
+{
+	void __iomem *mmio_base = ap->host_set->mmio_base;
+	u32 tmp;
+
+	/* global IRQ mask doesn't block SATA IRQ, turn off explicitly */
+	writel(0, mmio_base + sil_port[ap->port_no].sien);
+
+	/* plug IRQ */
+	tmp = readl(mmio_base + SIL_SYSCFG);
+	tmp |= SIL_MASK_IDE0_INT << ap->port_no;
+	writel(tmp, mmio_base + SIL_SYSCFG);
+	readl(mmio_base + SIL_SYSCFG);	/* flush */
+}
+
+static void sil_thaw(struct ata_port *ap)
+{
+	void __iomem *mmio_base = ap->host_set->mmio_base;
+	u32 tmp;
+
+	/* clear IRQ */
+	ata_chk_status(ap);
+	ata_bmdma_irq_clear(ap);
+
+	/* turn on SATA IRQ if supported */
+	if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
+		writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien);
+
+	/* turn on IRQ */
+	tmp = readl(mmio_base + SIL_SYSCFG);
+	tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no);
+	writel(tmp, mmio_base + SIL_SYSCFG);
+}
+
+/**
+ *	sil_dev_config - Apply device/host-specific errata fixups
+ *	@ap: Port containing device to be examined
+ *	@dev: Device to be examined
+ *
+ *	After the IDENTIFY [PACKET] DEVICE step is complete, and a
+ *	device is known to be present, this function is called.
+ *	We apply two errata fixups which are specific to Silicon Image,
+ *	a Seagate and a Maxtor fixup.
+ *
+ *	For certain Seagate devices, we must limit the maximum sectors
+ *	to under 8K.
+ *
+ *	For certain Maxtor devices, we must not program the drive
+ *	beyond udma5.
+ *
+ *	Both fixups are unfairly pessimistic.  As soon as I get more
+ *	information on these errata, I will create a more exhaustive
+ *	list, and apply the fixups to only the specific
+ *	devices/hosts/firmwares that need it.
+ *
+ *	20040111 - Seagate drives affected by the Mod15Write bug are blacklisted
+ *	The Maxtor quirk is in the blacklist, but I'm keeping the original
+ *	pessimistic fix for the following reasons...
+ *	- There seems to be less info on it, only one device gleaned off the
+ *	Windows	driver, maybe only one is affected.  More info would be greatly
+ *	appreciated.
+ *	- But then again UDMA5 is hardly anything to complain about
+ */
+static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
+{
+	unsigned int n, quirks = 0;
+	unsigned char model_num[41];
+
+	ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num));
+
+	for (n = 0; sil_blacklist[n].product; n++)
+		if (!strcmp(sil_blacklist[n].product, model_num)) {
+			quirks = sil_blacklist[n].quirk;
+			break;
+		}
+
+	/* limit requests to 15 sectors */
+	if (slow_down ||
+	    ((ap->flags & SIL_FLAG_MOD15WRITE) &&
+	     (quirks & SIL_QUIRK_MOD15WRITE))) {
+		ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix "
+			       "(mod15write workaround)\n");
+		dev->max_sectors = 15;
+		return;
+	}
+
+	/* limit to udma5 */
+	if (quirks & SIL_QUIRK_UDMA5MAX) {
+		ata_dev_printk(dev, KERN_INFO,
+			       "applying Maxtor errata fix %s\n", model_num);
+		dev->udma_mask &= ATA_UDMA5;
+		return;
+	}
+}
+
+static void sil_init_controller(struct pci_dev *pdev,
+				int n_ports, unsigned long host_flags,
+				void __iomem *mmio_base)
+{
+	u8 cls;
+	u32 tmp;
+	int i;
+
+	/* Initialize FIFO PCI bus arbitration */
+	cls = sil_get_device_cache_line(pdev);
+	if (cls) {
+		cls >>= 3;
+		cls++;  /* cls = (line_size/8)+1 */
+		for (i = 0; i < n_ports; i++)
+			writew(cls << 8 | cls,
+			       mmio_base + sil_port[i].fifo_cfg);
+	} else
+		dev_printk(KERN_WARNING, &pdev->dev,
+			   "cache line size not set.  Driver may not function\n");
+
+	/* Apply R_ERR on DMA activate FIS errata workaround */
+	if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+		int cnt;
+
+		for (i = 0, cnt = 0; i < n_ports; i++) {
+			tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+			if ((tmp & 0x3) != 0x01)
+				continue;
+			if (!cnt)
+				dev_printk(KERN_INFO, &pdev->dev,
+					   "Applying R_ERR on DMA activate "
+					   "FIS errata fix\n");
+			writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+			cnt++;
+		}
+	}
+
+	if (n_ports == 4) {
+		/* flip the magic "make 4 ports work" bit */
+		tmp = readl(mmio_base + sil_port[2].bmdma);
+		if ((tmp & SIL_INTR_STEERING) == 0)
+			writel(tmp | SIL_INTR_STEERING,
+			       mmio_base + sil_port[2].bmdma);
+	}
+}
+
+static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	static int printed_version;
+	struct ata_probe_ent *probe_ent = NULL;
+	unsigned long base;
+	void __iomem *mmio_base;
+	int rc;
+	unsigned int i;
+	int pci_dev_busy = 0;
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+	rc = pci_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc) {
+		pci_dev_busy = 1;
+		goto err_out;
+	}
+
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		goto err_out_regions;
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		goto err_out_regions;
+
+	probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
+	if (probe_ent == NULL) {
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	INIT_LIST_HEAD(&probe_ent->node);
+	probe_ent->dev = pci_dev_to_dev(pdev);
+	probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops;
+	probe_ent->sht = sil_port_info[ent->driver_data].sht;
+	probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2;
+	probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask;
+	probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
+	probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
+       	probe_ent->irq = pdev->irq;
+       	probe_ent->irq_flags = IRQF_SHARED;
+	probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags;
+
+	mmio_base = pci_iomap(pdev, 5, 0);
+	if (mmio_base == NULL) {
+		rc = -ENOMEM;
+		goto err_out_free_ent;
+	}
+
+	probe_ent->mmio_base = mmio_base;
+
+	base = (unsigned long) mmio_base;
+
+	for (i = 0; i < probe_ent->n_ports; i++) {
+		probe_ent->port[i].cmd_addr = base + sil_port[i].tf;
+		probe_ent->port[i].altstatus_addr =
+		probe_ent->port[i].ctl_addr = base + sil_port[i].ctl;
+		probe_ent->port[i].bmdma_addr = base + sil_port[i].bmdma;
+		probe_ent->port[i].scr_addr = base + sil_port[i].scr;
+		ata_std_ports(&probe_ent->port[i]);
+	}
+
+	sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags,
+			    mmio_base);
+
+	pci_set_master(pdev);
+
+	/* FIXME: check ata_device_add return value */
+	ata_device_add(probe_ent);
+	kfree(probe_ent);
+
+	return 0;
+
+err_out_free_ent:
+	kfree(probe_ent);
+err_out_regions:
+	pci_release_regions(pdev);
+err_out:
+	if (!pci_dev_busy)
+		pci_disable_device(pdev);
+	return rc;
+}
+
+static int sil_pci_device_resume(struct pci_dev *pdev)
+{
+	struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+
+	ata_pci_device_do_resume(pdev);
+	sil_init_controller(pdev, host_set->n_ports, host_set->ports[0]->flags,
+			    host_set->mmio_base);
+	ata_host_set_resume(host_set);
+
+	return 0;
+}
+
+static int __init sil_init(void)
+{
+	return pci_register_driver(&sil_pci_driver);
+}
+
+static void __exit sil_exit(void)
+{
+	pci_unregister_driver(&sil_pci_driver);
+}
+
+
+module_init(sil_init);
+module_exit(sil_exit);