x86: unify mp_register_gsi

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

2 files changed, 82 insertions, 10 deletions

diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse_32.c
index 1ad8a5d4e3e..6376791cffe 100644
--- a/arch/x86/kernel/mpparse_32.c
+++ b/arch/x86/kernel/mpparse_32.c
@@ -994,14 +994,15 @@ void __init mp_config_acpi_legacy_irqs(void)
 	}
 }
 
-#define MAX_GSI_NUM	4096
-#define IRQ_COMPRESSION_START	64
-
 int mp_register_gsi(u32 gsi, int triggering, int polarity)
 {
 	int ioapic = -1;
 	int ioapic_pin = 0;
 	int idx, bit = 0;
+#ifdef CONFIG_X86_32
+#define MAX_GSI_NUM	4096
+#define IRQ_COMPRESSION_START	64
+
 	static int pci_irq = IRQ_COMPRESSION_START;
 	/*
 	 * Mapping between Global System Interrupts, which
@@ -1009,6 +1010,11 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 	 * assigned to actual devices.
 	 */
 	static int gsi_to_irq[MAX_GSI_NUM];
+#else
+
+	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
+		return gsi;
+#endif
 
 	/* Don't set up the ACPI SCI because it's already set up */
 	if (acpi_gbl_FADT.sci_interrupt == gsi)
@@ -1022,8 +1028,10 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 
 	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
 
+#ifdef CONFIG_X86_32
 	if (ioapic_renumber_irq)
 		gsi = ioapic_renumber_irq(ioapic, gsi);
+#endif
 
 	/*
 	 * Avoid pin reprogramming.  PRTs typically include entries
@@ -1041,11 +1049,15 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 	if ((1 << bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
 		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
 			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+#ifdef CONFIG_X86_32
 		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
+#else
+		return gsi;
+#endif
 	}
 
 	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1 << bit);
-
+#ifdef CONFIG_X86_32
 	/*
 	 * For GSI >= 64, use IRQ compression
 	 */
@@ -1079,7 +1091,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 			return gsi;
 		}
 	}
-
+#endif
 	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
 				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
 				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
diff --git a/arch/x86/kernel/mpparse_64.c b/arch/x86/kernel/mpparse_64.c
index 8ad365136a6..7d742577d68 100644
--- a/arch/x86/kernel/mpparse_64.c
+++ b/arch/x86/kernel/mpparse_64.c
@@ -685,6 +685,8 @@ void __init find_smp_config(void)
 
 #ifdef CONFIG_ACPI
 
+#ifdef	CONFIG_X86_IO_APIC
+
 #define MP_ISA_BUS		0
 #define MP_MAX_IOAPIC_PIN	127
 
@@ -770,7 +772,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 	int ioapic = -1;
 	int pin = -1;
 
-	/* 
+	/*
 	 * Convert 'gsi' to 'ioapic.pin'.
 	 */
 	ioapic = mp_find_ioapic(gsi);
@@ -780,7 +782,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 
 	/*
 	 * TBD: This check is for faulty timer entries, where the override
-	 *      erroneously sets the trigger to level, resulting in a HUGE 
+	 *      erroneously sets the trigger to level, resulting in a HUGE
 	 *      increase of timer interrupts!
 	 */
 	if ((bus_irq == 0) && (trigger == 3))
@@ -886,9 +888,22 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 	int ioapic = -1;
 	int ioapic_pin = 0;
 	int idx, bit = 0;
+#ifdef CONFIG_X86_32
+#define MAX_GSI_NUM	4096
+#define IRQ_COMPRESSION_START	64
+
+	static int pci_irq = IRQ_COMPRESSION_START;
+	/*
+	 * Mapping between Global System Interrupts, which
+	 * represent all possible interrupts, and IRQs
+	 * assigned to actual devices.
+	 */
+	static int gsi_to_irq[MAX_GSI_NUM];
+#else
 
 	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
 		return gsi;
+#endif
 
 	/* Don't set up the ACPI SCI because it's already set up */
 	if (acpi_gbl_FADT.sci_interrupt == gsi)
@@ -902,8 +917,13 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 
 	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
 
-	/* 
-	 * Avoid pin reprogramming.  PRTs typically include entries  
+#ifdef CONFIG_X86_32
+	if (ioapic_renumber_irq)
+		gsi = ioapic_renumber_irq(ioapic, gsi);
+#endif
+
+	/*
+	 * Avoid pin reprogramming.  PRTs typically include entries
 	 * with redundant pin->gsi mappings (but unique PCI devices);
 	 * we only program the IOAPIC on the first.
 	 */
@@ -918,14 +938,54 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 	if ((1 << bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
 		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
 			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+#ifdef CONFIG_X86_32
+		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
+#else
 		return gsi;
+#endif
 	}
 
 	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1 << bit);
-
+#ifdef CONFIG_X86_32
+	/*
+	 * For GSI >= 64, use IRQ compression
+	 */
+	if ((gsi >= IRQ_COMPRESSION_START)
+	    && (triggering == ACPI_LEVEL_SENSITIVE)) {
+		/*
+		 * For PCI devices assign IRQs in order, avoiding gaps
+		 * due to unused I/O APIC pins.
+		 */
+		int irq = gsi;
+		if (gsi < MAX_GSI_NUM) {
+			/*
+			 * Retain the VIA chipset work-around (gsi > 15), but
+			 * avoid a problem where the 8254 timer (IRQ0) is setup
+			 * via an override (so it's not on pin 0 of the ioapic),
+			 * and at the same time, the pin 0 interrupt is a PCI
+			 * type.  The gsi > 15 test could cause these two pins
+			 * to be shared as IRQ0, and they are not shareable.
+			 * So test for this condition, and if necessary, avoid
+			 * the pin collision.
+			 */
+			gsi = pci_irq++;
+			/*
+			 * Don't assign IRQ used by ACPI SCI
+			 */
+			if (gsi == acpi_gbl_FADT.sci_interrupt)
+				gsi = pci_irq++;
+			gsi_to_irq[irq] = gsi;
+		} else {
+			printk(KERN_ERR "GSI %u is too high\n", gsi);
+			return gsi;
+		}
+	}
+#endif
 	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
 				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
 				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
 	return gsi;
 }
+
+#endif /* CONFIG_X86_IO_APIC */
 #endif /* CONFIG_ACPI */