Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 199 insertions, 0 deletions

diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
new file mode 100644
index 00000000000..5b5cd00d98c
--- /dev/null
+++ b/arch/parisc/Kconfig
@@ -0,0 +1,199 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux/PA-RISC Kernel Configuration"
+
+config PARISC
+	def_bool y
+	help
+	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
+	  in many of their workstations & servers (HP9000 700 and 800 series,
+	  and later HP3000 series).  The PA-RISC Linux project home page is
+	  at <http://www.parisc-linux.org/>.
+
+config MMU
+	def_bool y
+
+config STACK_GROWSUP
+	def_bool y
+
+config UID16
+	bool
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config GENERIC_ISA_DMA
+	bool
+
+config GENERIC_HARDIRQS
+	def_bool y
+
+config GENERIC_IRQ_PROBE
+	def_bool y
+
+# unless you want to implement ACPI on PA-RISC ... ;-)
+config PM
+	bool
+
+source "init/Kconfig"
+
+
+menu "Processor type and features"
+
+choice
+	prompt "Processor type"
+	default PA7000
+
+config PA7000
+	bool "PA7000/PA7100"
+	---help---
+	  This is the processor type of your CPU.  This information is
+	  used for optimizing purposes.  In order to compile a kernel
+	  that can run on all 32-bit PA CPUs (albeit not optimally fast),
+	  you can specify "PA7000" here.
+
+	  Specifying "PA8000" here will allow you to select a 64-bit kernel
+	  which is required on some machines.
+
+config PA7100LC
+	bool "PA7100LC"
+	help
+	  Select this option for the PCX-L processor, as used in the
+	  712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748,
+	  D200, D210, D300, D310 and E-class
+
+config PA7200
+	bool "PA7200"
+	help
+	  Select this option for the PCX-T' processor, as used in the
+	  C100, C110, J100, J110, J210XC, D250, D260, D350, D360,
+	  K100, K200, K210, K220, K400, K410 and K420
+
+config PA7300LC
+	bool "PA7300LC"
+	help
+	  Select this option for the PCX-L2 processor, as used in the
+	  744, A180, B132L, B160L, B180L, C132L, C160L, C180L,
+	  D220, D230, D320 and D330.
+
+config PA8X00
+	bool "PA8000 and up"
+	help
+	  Select this option for PCX-U to PCX-W2 processors.
+
+endchoice
+
+# Define implied options from the CPU selection here
+
+config PA20
+	def_bool y
+	depends on PA8X00
+
+config PA11
+	def_bool y
+	depends on PA7000 || PA7100LC || PA7200 || PA7300LC
+
+config PREFETCH
+	def_bool y
+	depends on PA8X00
+
+config 64BIT
+	bool "64-bit kernel"
+	depends on PA8X00
+	help
+	  Enable this if you want to support 64bit kernel on PA-RISC platform.
+
+	  At the moment, only people willing to use more than 2GB of RAM,
+	  or having a 64bit-only capable PA-RISC machine should say Y here.
+
+	  Since there is no 64bit userland on PA-RISC, there is no point to
+	  enable this option otherwise. The 64bit kernel is significantly bigger
+	  and slower than the 32bit one.
+
+config SMP
+	bool "Symmetric multi-processing support"
+	---help---
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, like most personal computers, say N. If
+	  you have a system with more than one CPU, say Y.
+
+	  If you say N here, the kernel will run on single and multiprocessor
+	  machines, but will use only one CPU of a multiprocessor machine. If
+	  you say Y here, the kernel will run on many, but not all,
+	  singleprocessor machines. On a singleprocessor machine, the kernel
+	  will run faster if you say N here.
+
+	  See also the <file:Documentation/smp.txt>,
+	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available
+	  at <http://www.tldp.org/docs.html#howto>.
+
+	  If you don't know what to do here, say N.
+
+config HOTPLUG_CPU
+	bool
+	default y if SMP
+	select HOTPLUG
+
+config DISCONTIGMEM
+	bool "Discontiguous memory support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  Say Y to support efficient handling of discontiguous physical memory,
+	  for architectures which are either NUMA (Non-Uniform Memory Access)
+	  or have huge holes in the physical address space for other reasons.
+	  See <file:Documentation/vm/numa> for more.
+
+config PREEMPT
+	bool
+#	bool "Preemptible Kernel"
+	default n
+
+config COMPAT
+	def_bool y
+	depends on 64BIT
+
+config HPUX
+	bool "Support for HP-UX binaries"
+	depends on !64BIT
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	depends on SMP
+	default "32"
+
+endmenu
+
+
+source "drivers/parisc/Kconfig"
+
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/parisc/oprofile/Kconfig"
+
+source "arch/parisc/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"