diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-12-15 09:01:00 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-12-15 09:01:00 -0800 |
commit | 050cbb09dac0402672edeaeac06094ef8ff1749a (patch) | |
tree | 89cbe4ac48e8e8f80ff5849e2cc33f045f5ccd52 /arch/avr32/boards | |
parent | 17c330f98383629cfd359ee62b3adde1d2a3ff7c (diff) | |
parent | 0386f9e68fc92a3650088b86d908b07de4fb1744 (diff) | |
download | linux-3.10-050cbb09dac0402672edeaeac06094ef8ff1749a.tar.gz linux-3.10-050cbb09dac0402672edeaeac06094ef8ff1749a.tar.bz2 linux-3.10-050cbb09dac0402672edeaeac06094ef8ff1749a.zip |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
avr32: update default configurations for ATNGW100, ATSTK1002 and ATSTK1006
avr32: add default configurations for ATNGW100 mkII and EVKLCD10X
avr32: add support for ATNGW100 mkII board
avr32: convert to asm-generic/hardirq.h
avr32: add two new at91 to cpu.h definition
avr32: clean up linker script using standard macros.
avr32: MRMT: correct setup of SPI slaves
avr32: function for independently setting up SPI slaves
avr32: re-instate MCI WP/CD pin assignments for ATNGW100
Diffstat (limited to 'arch/avr32/boards')
-rw-r--r-- | arch/avr32/boards/atngw100/Kconfig | 25 | ||||
-rw-r--r-- | arch/avr32/boards/atngw100/evklcd10x.c | 7 | ||||
-rw-r--r-- | arch/avr32/boards/atngw100/mrmt.c | 1 | ||||
-rw-r--r-- | arch/avr32/boards/atngw100/setup.c | 121 |
4 files changed, 133 insertions, 21 deletions
diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig index be27a0218ab..4e55617ade2 100644 --- a/arch/avr32/boards/atngw100/Kconfig +++ b/arch/avr32/boards/atngw100/Kconfig @@ -1,6 +1,17 @@ # NGW100 customization -if BOARD_ATNGW100 +if BOARD_ATNGW100_COMMON + +config BOARD_ATNGW100_MKII_LCD + bool "Enable ATNGW100 mkII LCD interface" + depends on BOARD_ATNGW100_MKII + help + This enables the LCD controller (LCDC) in the AT32AP7000. Since the + LCDC is multiplexed with MACB1 (LAN) Ethernet port, only one can be + enabled at a time. + + This choice enables the LCDC and disables the MACB1 interface marked + LAN on the PCB. choice prompt "Select an NGW100 add-on board to support" @@ -11,15 +22,11 @@ config BOARD_ATNGW100_ADDON_NONE config BOARD_ATNGW100_EVKLCD10X bool "EVKLCD10X addon board" + depends on BOARD_ATNGW100_MKI || BOARD_ATNGW100_MKII_LCD help This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA) - addon board for the NGW100. By enabling this the LCD controller and - AC97 controller is added as platform devices. - - This choice disables the detect pin and the write-protect pin for the - MCI platform device, since it conflicts with the LCD platform device. - The MCI pins can be reenabled by editing the "add device function" but - this may break the setup for other displays that use these pins. + addon board for the NGW100 and NGW100 mkII. By enabling this the LCD + controller and AC97 controller is added as platform devices. config BOARD_ATNGW100_MRMT bool "Mediama RMT1/2 add-on board" @@ -55,4 +62,4 @@ if BOARD_ATNGW100_MRMT source "arch/avr32/boards/atngw100/Kconfig_mrmt" endif -endif # BOARD_ATNGW100 +endif # BOARD_ATNGW100_COMMON diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c index 00337112c5a..20388750d56 100644 --- a/arch/avr32/boards/atngw100/evklcd10x.c +++ b/arch/avr32/boards/atngw100/evklcd10x.c @@ -164,7 +164,12 @@ static int __init atevklcd10x_init(void) at32_add_device_lcdc(0, &atevklcd10x_lcdc_data, fbmem_start, fbmem_size, - ATMEL_LCDC_ALT_18BIT | ATMEL_LCDC_PE_DVAL); +#ifdef CONFIG_BOARD_ATNGW100_MKII + ATMEL_LCDC_PRI_18BIT | ATMEL_LCDC_PC_DVAL +#else + ATMEL_LCDC_ALT_18BIT | ATMEL_LCDC_PE_DVAL +#endif + ); at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH); diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c index bf78e516a85..7919be311f4 100644 --- a/arch/avr32/boards/atngw100/mrmt.c +++ b/arch/avr32/boards/atngw100/mrmt.c @@ -302,6 +302,7 @@ static int __init mrmt1_init(void) at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ), GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH); set_irq_type( AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING ); + at32_spi_setup_slaves(0,spi01_board_info,ARRAY_SIZE(spi01_board_info)); spi_register_board_info(spi01_board_info,ARRAY_SIZE(spi01_board_info)); #endif diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index bc299fbbeb4..8c6a2440e34 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -20,6 +20,7 @@ #include <linux/leds.h> #include <linux/spi/spi.h> #include <linux/atmel-mci.h> +#include <linux/usb/atmel_usba_udc.h> #include <asm/io.h> #include <asm/setup.h> @@ -36,6 +37,75 @@ unsigned long at32_board_osc_rates[3] = { [2] = 12000000, /* 12 MHz on osc1 */ }; +/* + * The ATNGW100 mkII is very similar to the ATNGW100. Both have the AT32AP7000 + * chip on board; the difference is that the ATNGW100 mkII has 128 MB 32-bit + * SDRAM (the ATNGW100 has 32 MB 16-bit SDRAM) and 256 MB 16-bit NAND flash + * (the ATNGW100 has none.) + * + * The RAM difference is handled by the boot loader, so the only difference we + * end up handling here is the NAND flash, EBI pin reservation and if LCDC or + * MACB1 should be enabled. + */ +#ifdef CONFIG_BOARD_ATNGW100_MKII +#include <linux/mtd/partitions.h> +#include <mach/smc.h> + +static struct smc_timing nand_timing __initdata = { + .ncs_read_setup = 0, + .nrd_setup = 10, + .ncs_write_setup = 0, + .nwe_setup = 10, + + .ncs_read_pulse = 30, + .nrd_pulse = 15, + .ncs_write_pulse = 30, + .nwe_pulse = 15, + + .read_cycle = 30, + .write_cycle = 30, + + .ncs_read_recover = 0, + .nrd_recover = 15, + .ncs_write_recover = 0, + /* WE# high -> RE# low min 60 ns */ + .nwe_recover = 50, +}; + +static struct smc_config nand_config __initdata = { + .bus_width = 2, + .nrd_controlled = 1, + .nwe_controlled = 1, + .nwait_mode = 0, + .byte_write = 0, + .tdf_cycles = 2, + .tdf_mode = 0, +}; + +static struct mtd_partition nand_partitions[] = { + { + .name = "main", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition *nand_part_info(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(nand_partitions); + return nand_partitions; +} + +static struct atmel_nand_data atngw100mkii_nand_data __initdata = { + .cle = 21, + .ale = 22, + .rdy_pin = GPIO_PIN_PB(28), + .enable_pin = GPIO_PIN_PE(23), + .bus_width_16 = true, + .partition_info = nand_part_info, +}; +#endif + /* Initialized by bootloader-specific startup code. */ struct tag *bootloader_tags __initdata; @@ -56,9 +126,9 @@ static struct spi_board_info spi0_board_info[] __initdata = { static struct mci_platform_data __initdata mci0_data = { .slot[0] = { .bus_width = 4, -#if defined(CONFIG_BOARD_ATNGW100_EVKLCD10X) || defined(CONFIG_BOARD_ATNGW100_MRMT1) - .detect_pin = GPIO_PIN_NONE, - .wp_pin = GPIO_PIN_NONE, +#if defined(CONFIG_BOARD_ATNGW100_MKII) + .detect_pin = GPIO_PIN_PC(25), + .wp_pin = GPIO_PIN_PE(22), #else .detect_pin = GPIO_PIN_PC(25), .wp_pin = GPIO_PIN_PE(0), @@ -66,6 +136,14 @@ static struct mci_platform_data __initdata mci0_data = { }, }; +static struct usba_platform_data atngw100_usba_data __initdata = { +#if defined(CONFIG_BOARD_ATNGW100_MKII) + .vbus_pin = GPIO_PIN_PE(26), +#else + .vbus_pin = -ENODEV, +#endif +}; + /* * The next two functions should go away as the boot loader is * supposed to initialize the macb address registers with a valid @@ -173,18 +251,27 @@ static int __init atngw100_init(void) unsigned i; /* - * ATNGW100 uses 16-bit SDRAM interface, so we don't need to - * reserve any pins for it. + * ATNGW100 mkII uses 32-bit SDRAM interface. Reserve the + * SDRAM-specific pins so that nobody messes with them. */ +#ifdef CONFIG_BOARD_ATNGW100_MKII + at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); + + smc_set_timing(&nand_config, &nand_timing); + smc_set_configuration(3, &nand_config); + at32_add_device_nand(0, &atngw100mkii_nand_data); +#endif at32_add_device_usart(0); set_hw_addr(at32_add_device_eth(0, ð_data[0])); +#ifndef CONFIG_BOARD_ATNGW100_MKII_LCD set_hw_addr(at32_add_device_eth(1, ð_data[1])); +#endif at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); at32_add_device_mci(0, &mci0_data); - at32_add_device_usba(0, NULL); + at32_add_device_usba(0, &atngw100_usba_data); for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) { at32_select_gpio(ngw_leds[i].gpio, @@ -194,10 +281,14 @@ static int __init atngw100_init(void) /* all these i2c/smbus pins should have external pullups for * open-drain sharing among all I2C devices. SDA and SCL do; - * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus), - * but it's not available off-board. + * PB28/EXTINT3 (ATNGW100) and PE21 (ATNGW100 mkII) doesn't; it should + * be SMBALERT# (for PMBus), but it's not available off-board. */ +#ifdef CONFIG_BOARD_ATNGW100_MKII + at32_select_periph(GPIO_PIOE_BASE, 1 << 21, 0, AT32_GPIOF_PULLUP); +#else at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP); +#endif at32_select_gpio(i2c_gpio_data.sda_pin, AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); at32_select_gpio(i2c_gpio_data.scl_pin, @@ -211,14 +302,22 @@ postcore_initcall(atngw100_init); static int __init atngw100_arch_init(void) { - /* PB30 is the otherwise unused jumper on the mainboard, with an - * external pullup; the jumper grounds it. Use it however you - * like, including letting U-Boot or Linux tweak boot sequences. + /* PB30 (ATNGW100) and PE30 (ATNGW100 mkII) is the otherwise unused + * jumper on the mainboard, with an external pullup; the jumper grounds + * it. Use it however you like, including letting U-Boot or Linux tweak + * boot sequences. */ +#ifdef CONFIG_BOARD_ATNGW100_MKII + at32_select_gpio(GPIO_PIN_PE(30), 0); + gpio_request(GPIO_PIN_PE(30), "j15"); + gpio_direction_input(GPIO_PIN_PE(30)); + gpio_export(GPIO_PIN_PE(30), false); +#else at32_select_gpio(GPIO_PIN_PB(30), 0); gpio_request(GPIO_PIN_PB(30), "j15"); gpio_direction_input(GPIO_PIN_PB(30)); gpio_export(GPIO_PIN_PB(30), false); +#endif /* set_irq_type() after the arch_initcall for EIC has run, and * before the I2C subsystem could try using this IRQ. |