ARM: dts: mvebu: Convert all the mvebu files to use the range property

This conversion will allow to keep 32 bits addresses for the internal
registers whereas the memory of the system will be 64 bits.
Later it will also ease the move of the mvebu-mbus driver to the
device tree support.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 29 insertions, 29 deletions

diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index b9da5b8ae28..ce4f80a8285 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -62,7 +62,7 @@
 	soc {
 		pinctrl {
 			compatible = "marvell,mv78460-pinctrl";
-			reg = <0xd0018000 0x38>;
+			reg = <0x18000 0x38>;
 
 			sdio_pins: sdio-pins {
 				marvell,pins = "mpp30", "mpp31", "mpp32",
@@ -71,9 +71,9 @@
 			};
 		};
 
-		gpio0: gpio@d0018100 {
+		gpio0: gpio@18100 {
 			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
+			reg = <0x18100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -82,9 +82,9 @@
 			interrupts = <82>, <83>, <84>, <85>;
 		};
 
-		gpio1: gpio@d0018140 {
+		gpio1: gpio@18140 {
 			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
+			reg = <0x18140 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -93,9 +93,9 @@
 			interrupts = <87>, <88>, <89>, <90>;
 		};
 
-		gpio2: gpio@d0018180 {
+		gpio2: gpio@18180 {
 			compatible = "marvell,orion-gpio";
-			reg = <0xd0018180 0x40>;
+			reg = <0x18180 0x40>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -104,9 +104,9 @@
 			interrupts = <91>;
 		};
 
-		ethernet@d0034000 {
+		ethernet@34000 {
 				compatible = "marvell,armada-370-neta";
-				reg = <0xd0034000 0x2500>;
+				reg = <0x34000 0x2500>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;
 				status = "disabled";
@@ -127,22 +127,22 @@
 
 			bus-range = <0x00 0xff>;
 
-			ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000   /* Port 0.0 registers */
-				  0x82000000 0 0xd0042000 0xd0042000 0 0x00002000   /* Port 2.0 registers */
-				  0x82000000 0 0xd0044000 0xd0044000 0 0x00002000   /* Port 0.1 registers */
-				  0x82000000 0 0xd0048000 0xd0048000 0 0x00002000   /* Port 0.2 registers */
-				  0x82000000 0 0xd004c000 0xd004c000 0 0x00002000   /* Port 0.3 registers */
-				  0x82000000 0 0xd0080000 0xd0080000 0 0x00002000   /* Port 1.0 registers */
-				  0x82000000 0 0xd0082000 0xd0082000 0 0x00002000   /* Port 3.0 registers */
-				  0x82000000 0 0xd0084000 0xd0084000 0 0x00002000   /* Port 1.1 registers */
-				  0x82000000 0 0xd0088000 0xd0088000 0 0x00002000   /* Port 1.2 registers */
-				  0x82000000 0 0xd008c000 0xd008c000 0 0x00002000   /* Port 1.3 registers */
+			ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+				  0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
+				  0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
+				  0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
+				  0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				  0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
+				  0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
+				  0x82000000 0 0x84000 0x84000 0 0x00002000   /* Port 1.1 registers */
+				  0x82000000 0 0x88000 0x88000 0 0x00002000   /* Port 1.2 registers */
+				  0x82000000 0 0x8c000 0x8c000 0 0x00002000   /* Port 1.3 registers */
 				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
 				  0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
 
 			pcie@1,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -158,7 +158,7 @@
 
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -174,7 +174,7 @@
 
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -190,7 +190,7 @@
 
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -206,7 +206,7 @@
 
 			pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -222,7 +222,7 @@
 
 			pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -238,7 +238,7 @@
 
 			pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -254,7 +254,7 @@
 
 			pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -269,7 +269,7 @@
 			};
 			pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -285,7 +285,7 @@
 
 			pcie@10,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>;
+				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
 				reg = <0x5000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;