clk: max77686: Register OF clock provider

If max77686 chip is instantiated from device tree, it is desirable to
have an OF clock provider to allow device tree based look-up of clocks.
This patch adds OF clock provider registration to the clk-max77686
driver.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>

2 files changed, 41 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
new file mode 100644
index 00000000000..96ce71bbd74
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -0,0 +1,38 @@
+Binding for Maxim MAX77686 32k clock generator block
+
+This is a part of device tree bindings of MAX77686 multi-function device.
+More information can be found in bindings/mfd/max77686.txt file.
+
+The MAX77686 contains three 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C.
+
+Following properties should be presend in main device node of the MFD chip.
+
+Required properties:
+- #clock-cells: simple one-cell clock specifier format is used, where the
+  only cell is used as an index of the clock inside the provider. Following
+  indices are allowed:
+    - 0: 32khz_ap clock,
+    - 1: 32khz_cp clock,
+    - 2: 32khz_pmic clock.
+
+Example: Node of the MFD chip
+
+	max77686: max77686@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&wakeup_eint>;
+		interrupts = <26 0>;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		/* ... */
+	};
+
+Example: Clock consumer node
+
+	foo@0 {
+		compatible = "bar,foo";
+		/* ... */
+		clock-names = "my-clock";
+		clocks = <&max77686 2>;
+	};
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index c6a3469d343..678f3cf0b8f 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -7,6 +7,9 @@ different i2c slave address,presently for which we are statically creating i2c
 client while probing.This document describes the binding for mfd device and
 PMIC submodule.
 
+Binding for the built-in 32k clock generator block is defined separately
+in bindings/clk/maxim,max77686.txt file.
+
 Required properties:
 - compatible : Must be "maxim,max77686";
 - reg : Specifies the i2c slave address of PMIC block.