summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSimon Arlott <simon@fire.lp0.eu>2007-05-14 08:15:10 +0900
committerPaul Mundt <lethal@linux-sh.org>2007-05-21 14:31:39 +0900
commite868d61272caa648214046a096e5a6bfc068dc8c (patch)
tree087153c10725af12129ac8c55bda489f255bdd2c
parent049fa57ce3b22d9f5acb251070941b630ee71d6e (diff)
downloadlinux-3.10-e868d61272caa648214046a096e5a6bfc068dc8c.tar.gz
linux-3.10-e868d61272caa648214046a096e5a6bfc068dc8c.tar.bz2
linux-3.10-e868d61272caa648214046a096e5a6bfc068dc8c.zip
spelling fixes: arch/sh/
Spelling fixes in arch/sh/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-rw-r--r--arch/sh/boards/landisk/gio.c2
-rw-r--r--arch/sh/boards/snapgear/rtc.c2
-rw-r--r--arch/sh/boards/superh/microdev/io.c6
-rw-r--r--arch/sh/boards/superh/microdev/irq.c6
-rw-r--r--arch/sh/boards/superh/microdev/setup.c2
-rw-r--r--arch/sh/boards/unknown/setup.c2
-rw-r--r--arch/sh/drivers/dma/dma-api.c2
-rw-r--r--arch/sh/drivers/dma/dma-isa.c2
-rw-r--r--arch/sh/drivers/dma/dmabrg.c2
-rw-r--r--arch/sh/drivers/pci/ops-dreamcast.c2
-rw-r--r--arch/sh/drivers/pci/pci-st40.c6
-rw-r--r--arch/sh/drivers/pci/pci-st40.h2
-rw-r--r--arch/sh/drivers/superhyway/ops-sh4-202.c2
-rw-r--r--arch/sh/kernel/cf-enabler.c2
-rw-r--r--arch/sh/kernel/cpu/irq/maskreg.c2
-rw-r--r--arch/sh/kernel/cpu/sh4/fpu.c2
-rw-r--r--arch/sh/kernel/kgdb_stub.c4
-rw-r--r--arch/sh/kernel/traps.c2
-rw-r--r--arch/sh/math-emu/math.c2
-rw-r--r--arch/sh/mm/init.c2
20 files changed, 27 insertions, 27 deletions
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c
index 50d38be62f0..a37643d002b 100644
--- a/arch/sh/boards/landisk/gio.c
+++ b/arch/sh/boards/landisk/gio.c
@@ -69,7 +69,7 @@ static int gio_ioctl(struct inode *inode, struct file *filp,
}
switch (cmd) {
- case GIODRV_IOCSGIOSETADDR: /* addres set */
+ case GIODRV_IOCSGIOSETADDR: /* address set */
addr = data;
break;
diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c
index 1659fdd6695..edb3dd936cb 100644
--- a/arch/sh/boards/snapgear/rtc.c
+++ b/arch/sh/boards/snapgear/rtc.c
@@ -108,7 +108,7 @@ static void ds1302_writebyte(unsigned int addr, unsigned int val)
static void ds1302_reset(void)
{
unsigned long flags;
- /* Hardware dependant reset/init */
+ /* Hardware dependent reset/init */
local_irq_save(flags);
set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK);
set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c
index 83419bf4c83..b704e20d7e4 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/superh/microdev/io.c
@@ -198,12 +198,12 @@ void microdev_outb(unsigned char b, unsigned long port)
/*
* There is a board feature with the current SH4-202 MicroDev in
* that the 2 byte enables (nBE0 and nBE1) are tied together (and
- * to the Chip Select Line (Ethernet_CS)). Due to this conectivity,
+ * to the Chip Select Line (Ethernet_CS)). Due to this connectivity,
* it is not possible to safely perform 8-bit writes to the
* Ethernet registers, as 16-bits will be consumed from the Data
* lines (corrupting the other byte). Hence, this function is
- * written to impliment 16-bit read/modify/write for all byte-wide
- * acceses.
+ * written to implement 16-bit read/modify/write for all byte-wide
+ * accesses.
*
* Note: there is no problem with byte READS (even or odd).
*
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c
index 8c64baa3036..cc1cb04fa61 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/superh/microdev/irq.c
@@ -100,7 +100,7 @@ static void disable_microdev_irq(unsigned int irq)
fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
- /* disable interupts on the FPGA INTC register */
+ /* disable interrupts on the FPGA INTC register */
ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
}
@@ -125,7 +125,7 @@ static void enable_microdev_irq(unsigned int irq)
priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
ctrl_outl(priorities, priorityReg);
- /* enable interupts on the FPGA INTC register */
+ /* enable interrupts on the FPGA INTC register */
ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
}
@@ -152,7 +152,7 @@ extern void __init init_microdev_irq(void)
{
int i;
- /* disable interupts on the FPGA INTC register */
+ /* disable interrupts on the FPGA INTC register */
ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c
index 031c814e6e7..6396cea1c89 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/superh/microdev/setup.c
@@ -349,7 +349,7 @@ static int __init smsc_superio_setup(void)
SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */
- /* Exit the configuraton state */
+ /* Exit the configuration state */
outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
return 0;
diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c
index 1c941370a2e..bee4612de59 100644
--- a/arch/sh/boards/unknown/setup.c
+++ b/arch/sh/boards/unknown/setup.c
@@ -6,7 +6,7 @@
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
- * Setup code for an unknown machine (internal peripherials only)
+ * Setup code for an unknown machine (internal peripherals only)
*
* This is the simplest of all boards, and serves only as a quick and dirty
* method to start debugging a new board during bring-up until proper board
diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c
index e062067edd2..8057a27a1bc 100644
--- a/arch/sh/drivers/dma/dma-api.c
+++ b/arch/sh/drivers/dma/dma-api.c
@@ -115,7 +115,7 @@ static int search_cap(const char **haystack, const char *needle)
/**
* request_dma_bycap - Allocate a DMA channel based on its capabilities
* @dmac: List of DMA controllers to search
- * @caps: List of capabilites
+ * @caps: List of capabilities
*
* Search all channels of all DMA controllers to find a channel which
* matches the requested capabilities. The result is the channel
diff --git a/arch/sh/drivers/dma/dma-isa.c b/arch/sh/drivers/dma/dma-isa.c
index 05a74ffdb68..5fb044b791c 100644
--- a/arch/sh/drivers/dma/dma-isa.c
+++ b/arch/sh/drivers/dma/dma-isa.c
@@ -28,7 +28,7 @@
* NOTE: ops->xfer() is the preferred way of doing things. However, there
* are some users of the ISA DMA API that exist in common code that we
* don't necessarily want to go out of our way to break, so we still
- * allow for some compatability at that level. Any new code is strongly
+ * allow for some compatibility at that level. Any new code is strongly
* advised to run far away from the ISA DMA API and use the SH DMA API
* directly.
*/
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
index 9d0a29370f2..5e22689c2fc 100644
--- a/arch/sh/drivers/dma/dmabrg.c
+++ b/arch/sh/drivers/dma/dmabrg.c
@@ -33,7 +33,7 @@
* 9 | HAC1/SSI1 | rec | half done | DMABRGI2
*
* all can be enabled/disabled in the DMABRGCR register,
- * as well as checked if they occured.
+ * as well as checked if they occurred.
*
* DMABRGI0 services USB DMA Address errors, but it still must be
* enabled/acked in the DMABRGCR register. USB-DMA complete indicator
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index 381306cf542..e1284fc6936 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -57,7 +57,7 @@ struct pci_channel board_pci_channels[] = {
*
* Also, we could very easily support both Type 0 and Type 1 configurations
* here, but since it doesn't seem that there is any such implementation in
- * existance, we don't bother.
+ * existence, we don't bother.
*
* I suppose if someone actually gets around to ripping the chip out of
* the BBA and hanging some more devices off of it, then this might be
diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c
index d67656a44b1..543417ff831 100644
--- a/arch/sh/drivers/pci/pci-st40.c
+++ b/arch/sh/drivers/pci/pci-st40.c
@@ -292,7 +292,7 @@ int __init st40pci_init(unsigned memStart, unsigned memSize)
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
PCI_COMMAND_IO);
- /* Accesse to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000
+ /* Access to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000
* on the PCI bus. This allows a nice 1-1 bus to phys mapping.
*/
@@ -315,7 +315,7 @@ int __init st40pci_init(unsigned memStart, unsigned memSize)
ST40PCI_WRITE(CSR_MBAR0, 0);
ST40PCI_WRITE(LSR0, 0x0fff0001);
- /* ... and set up the initial incomming window to expose all of RAM */
+ /* ... and set up the initial incoming window to expose all of RAM */
pci_set_rbar_region(7, memStart, memStart, memSize);
/* Maximise timeout values */
@@ -473,7 +473,7 @@ static void pci_set_rbar_region(unsigned int region, unsigned long localAddr
mask = r2p2(regionSize) - 0x10000;
- /* Diable the region (in case currently in use, should never happen) */
+ /* Disable the region (in case currently in use, should never happen) */
ST40PCI_WRITE_INDEXED(RSR, region, 0);
/* Start of local address space to publish */
diff --git a/arch/sh/drivers/pci/pci-st40.h b/arch/sh/drivers/pci/pci-st40.h
index d729e0c2d5f..cf0d35bd135 100644
--- a/arch/sh/drivers/pci/pci-st40.h
+++ b/arch/sh/drivers/pci/pci-st40.h
@@ -4,7 +4,7 @@
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
- * Defintions for the ST40 PCI hardware.
+ * Definitions for the ST40 PCI hardware.
*/
#ifndef __PCI_ST40_H__
diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c
index a55c98a9052..3b14bf860db 100644
--- a/arch/sh/drivers/superhyway/ops-sh4-202.c
+++ b/arch/sh/drivers/superhyway/ops-sh4-202.c
@@ -130,7 +130,7 @@ static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr)
* Some modules (PBR and ePBR for instance) also appear to have
* VCRL/VCRH flipped in the documentation, but on the SH4-202
* itself it appears that these are all consistently mapped with
- * VCRH preceeding VCRL.
+ * VCRH preceding VCRL.
*
* Do not trust the documentation, for it is evil.
*/
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index 0758d48147a..849a9e19139 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -31,7 +31,7 @@
*/
#if defined(CONFIG_CPU_SH4)
/* SH4 can't access PCMCIA interface through P2 area.
- * we must remap it with appropreate attribute bit of the page set.
+ * we must remap it with appropriate attribute bit of the page set.
* this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */
#if defined(CONFIG_CF_AREA6)
diff --git a/arch/sh/kernel/cpu/irq/maskreg.c b/arch/sh/kernel/cpu/irq/maskreg.c
index 492db31b3ca..978992e367a 100644
--- a/arch/sh/kernel/cpu/irq/maskreg.c
+++ b/arch/sh/kernel/cpu/irq/maskreg.c
@@ -38,7 +38,7 @@ static struct hw_interrupt_type maskreg_irq_type = {
.end = end_maskreg_irq
};
-/* actual implementatin */
+/* actual implementation */
static unsigned int startup_maskreg_irq(unsigned int irq)
{
enable_maskreg_irq(irq);
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index d61dd599169..c5a4fc77fa0 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -138,7 +138,7 @@ restore_fpu(struct task_struct *tsk)
/*
* Load the FPU with signalling NANS. This bit pattern we're using
* has the property that no matter wether considered as single or as
- * double precission represents signaling NANS.
+ * double precision represents signaling NANS.
*/
static void
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index a5323364cbc..edd1ec214e6 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -2,7 +2,7 @@
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
- * Containes extracts from code by Glenn Engel, Jim Kingdon,
+ * Contains extracts from code by Glenn Engel, Jim Kingdon,
* David Grothe <dave@gcom.com>, Tigran Aivazian <tigran@sco.com>,
* Amit S. Kale <akale@veritas.com>, William Gatliff <bgat@open-widgets.com>,
* Ben Lee, Steve Chamberlain and Benoit Miller <fulg@iname.com>.
@@ -85,7 +85,7 @@
*
* Responses can be run-length encoded to save space. A '*' means that
* the next character is an ASCII encoding giving a repeat count which
- * stands for that many repititions of the character preceding the '*'.
+ * stands for that many repetitions of the character preceding the '*'.
* The encoding is n+29, yielding a printable character where n >=3
* (which is where RLE starts to win). Don't use an n > 126.
*
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 3a197649cd8..a01e36705c5 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -513,7 +513,7 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
* misaligned data access
* access to >= 0x80000000 is user mode
* Unfortuntaly we can't distinguish between instruction address error
- * and data address errors caused by read acceses.
+ * and data address errors caused by read accesses.
*/
asmlinkage void do_address_error(struct pt_regs *regs,
unsigned long writeaccess,
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
index 1efbac15ff4..a38e1eed9e7 100644
--- a/arch/sh/math-emu/math.c
+++ b/arch/sh/math-emu/math.c
@@ -148,7 +148,7 @@ fmac(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
return 0;
}
-// to process fmov's extention (odd n for DR access XD).
+// to process fmov's extension (odd n for DR access XD).
#define FMOV_EXT(x) if(x&1) x+=16-1
static int
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 8fe223a890e..2bb0d865b8f 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -112,7 +112,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
* As a performance optimization, other platforms preserve the fixmap mapping
* across a context switch, we don't presently do this, but this could be done
* in a similar fashion as to the wired TLB interface that sh64 uses (by way
- * of the memorry mapped UTLB configuration) -- this unfortunately forces us to
+ * of the memory mapped UTLB configuration) -- this unfortunately forces us to
* give up a TLB entry for each mapping we want to preserve. While this may be
* viable for a small number of fixmaps, it's not particularly useful for
* everything and needs to be carefully evaluated. (ie, we may want this for