summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRongQing.Li <roy.qing.li@gmail.com>2012-04-27 19:53:41 +0000
committerDavid S. Miller <davem@davemloft.net>2012-04-30 21:37:27 -0400
commitd344c4f3103c6faa1635b155d8f516e8a7e0aa4e (patch)
treea3384fbfcbc8aebe8065279c5744488ca8b59672
parent1d0c0b328a63826b7c80c27d1c4f2b04e8225273 (diff)
downloadlinux-3.10-d344c4f3103c6faa1635b155d8f516e8a7e0aa4e.tar.gz
linux-3.10-d344c4f3103c6faa1635b155d8f516e8a7e0aa4e.tar.bz2
linux-3.10-d344c4f3103c6faa1635b155d8f516e8a7e0aa4e.zip
pch_gbe: reprogram multicast address register on reset
The reset logic after a Rx FIFO overrun will clear the programmed multicast addresses. This patch fixes the issue by reprogramming the registers after the reset. The commit eefc48b ("pch_gbe: reprogram multicast address register on reset") tried to fix this problem, but it introduces unnecessary codes. In fact, all multicast addresses have been saved in netdev->mc, So we can call pch_gbe_set_multi() directly after reset_hw and reset_rx. This commit kills 50+ line codes Cc: Richard Cochran <richardcochran@gmail.com> Cc: Takahiro Shimizu <tshimizu818@gmail.com> Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c60
1 files changed, 5 insertions, 55 deletions
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 107f41a46a4..9dc7e502367 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -120,6 +120,7 @@ static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT;
static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg);
static void pch_gbe_mdio_write(struct net_device *netdev, int addr, int reg,
int data);
+static void pch_gbe_set_multi(struct net_device *netdev);
#ifdef CONFIG_PCH_PTP
static struct sock_filter ptp_filter[] = {
@@ -391,58 +392,13 @@ static void pch_gbe_mac_mar_set(struct pch_gbe_hw *hw, u8 * addr, u32 index)
}
/**
- * pch_gbe_mac_save_mac_addr_regs - Save MAC addresse registers
- * @hw: Pointer to the HW structure
- * @addr: Pointer to the MAC address
- * @index: MAC address array register
- */
-static void
-pch_gbe_mac_save_mac_addr_regs(struct pch_gbe_hw *hw,
- struct pch_gbe_regs_mac_adr *mac_adr, u32 index)
-{
- mac_adr->high = ioread32(&hw->reg->mac_adr[index].high);
- mac_adr->low = ioread32(&hw->reg->mac_adr[index].low);
-}
-
-/**
- * pch_gbe_mac_store_mac_addr_regs - Store MAC addresse registers
- * @hw: Pointer to the HW structure
- * @addr: Pointer to the MAC address
- * @index: MAC address array register
- */
-static void
-pch_gbe_mac_store_mac_addr_regs(struct pch_gbe_hw *hw,
- struct pch_gbe_regs_mac_adr *mac_adr, u32 index)
-{
- u32 adrmask;
-
- adrmask = ioread32(&hw->reg->ADDR_MASK);
- iowrite32((adrmask | (0x0001 << index)), &hw->reg->ADDR_MASK);
- /* wait busy */
- pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY);
- /* Set the MAC address to the MAC address xA/xB register */
- iowrite32(mac_adr->high, &hw->reg->mac_adr[index].high);
- iowrite32(mac_adr->low, &hw->reg->mac_adr[index].low);
- iowrite32((adrmask & ~(0x0001 << index)), &hw->reg->ADDR_MASK);
- /* wait busy */
- pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY);
-}
-
-#define MAC_ADDR_LIST_NUM 16
-/**
* pch_gbe_mac_reset_hw - Reset hardware
* @hw: Pointer to the HW structure
*/
static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw)
{
- struct pch_gbe_regs_mac_adr mac_addr_list[MAC_ADDR_LIST_NUM];
- int i;
-
/* Read the MAC address. and store to the private data */
pch_gbe_mac_read_mac_addr(hw);
- /* Read other MAC addresses */
- for (i = 1; i < MAC_ADDR_LIST_NUM; i++)
- pch_gbe_mac_save_mac_addr_regs(hw, &mac_addr_list[i], i);
iowrite32(PCH_GBE_ALL_RST, &hw->reg->RESET);
#ifdef PCH_GBE_MAC_IFOP_RGMII
iowrite32(PCH_GBE_MODE_GMII_ETHER, &hw->reg->MODE);
@@ -450,26 +406,17 @@ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw)
pch_gbe_wait_clr_bit(&hw->reg->RESET, PCH_GBE_ALL_RST);
/* Setup the receive addresses */
pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
- for (i = 1; i < MAC_ADDR_LIST_NUM; i++)
- pch_gbe_mac_store_mac_addr_regs(hw, &mac_addr_list[i], i);
return;
}
static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw)
{
- struct pch_gbe_regs_mac_adr mac_addr_list[MAC_ADDR_LIST_NUM];
- int i;
-
/* Read the MAC addresses. and store to the private data */
pch_gbe_mac_read_mac_addr(hw);
- for (i = 1; i < MAC_ADDR_LIST_NUM; i++)
- pch_gbe_mac_save_mac_addr_regs(hw, &mac_addr_list[i], i);
iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET);
pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST);
/* Setup the MAC addresses */
pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
- for (i = 1; i < MAC_ADDR_LIST_NUM; i++)
- pch_gbe_mac_store_mac_addr_regs(hw, &mac_addr_list[i], i);
return;
}
@@ -836,6 +783,8 @@ void pch_gbe_reinit_locked(struct pch_gbe_adapter *adapter)
void pch_gbe_reset(struct pch_gbe_adapter *adapter)
{
pch_gbe_mac_reset_hw(&adapter->hw);
+ /* reprogram multicast address register after reset */
+ pch_gbe_set_multi(adapter->netdev);
/* Setup the receive address. */
pch_gbe_mac_init_rx_addrs(&adapter->hw, PCH_GBE_MAR_ENTRIES);
if (pch_gbe_hal_init_hw(&adapter->hw))
@@ -1398,6 +1347,8 @@ static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter)
/* Stop Receive */
pch_gbe_mac_reset_rx(hw);
}
+ /* reprogram multicast address register after reset */
+ pch_gbe_set_multi(adapter->netdev);
}
static void pch_gbe_start_receive(struct pch_gbe_hw *hw)
@@ -1980,7 +1931,6 @@ static int pch_gbe_request_irq(struct pch_gbe_adapter *adapter)
}
-static void pch_gbe_set_multi(struct net_device *netdev);
/**
* pch_gbe_up - Up GbE network device
* @adapter: Board private structure