Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

90 files changed, 1289 insertions, 1629 deletions

diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index e9c0178cd20..ac7eabbf662 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -107,8 +107,8 @@ hardware.
 	indicate that the signal is permanently active.  If RI is
 	not available, the signal should not be indicated as active.
 
-	Locking: none.
-	Interrupts: caller dependent.
+	Locking: port->lock taken.
+	Interrupts: locally disabled.
 	This call must not sleep
 
   stop_tx(port,tty_stop)
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 4c38bd8bc29..b713c44c6fb 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -30,9 +30,6 @@ extern void __lshrdi3(void);
 extern void __modsi3(void);
 extern void __muldi3(void);
 extern void __ucmpdi2(void);
-extern void __udivdi3(void);
-extern void __umoddi3(void);
-extern void __udivmoddi4(void);
 extern void __udivsi3(void);
 extern void __umodsi3(void);
 extern void __do_div64(void);
@@ -134,9 +131,6 @@ EXPORT_SYMBOL(__lshrdi3);
 EXPORT_SYMBOL(__modsi3);
 EXPORT_SYMBOL(__muldi3);
 EXPORT_SYMBOL(__ucmpdi2);
-EXPORT_SYMBOL(__udivdi3);
-EXPORT_SYMBOL(__umoddi3);
-EXPORT_SYMBOL(__udivmoddi4);
 EXPORT_SYMBOL(__udivsi3);
 EXPORT_SYMBOL(__umodsi3);
 EXPORT_SYMBOL(__do_div64);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 8cf733daa80..35b7273cfdb 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -359,7 +359,8 @@ void cpu_init(void)
 	      "I" (offsetof(struct stack, abt[0])),
 	      "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
 	      "I" (offsetof(struct stack, und[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE));
+	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+	    : "r14");
 }
 
 static struct machine_desc * __init setup_machine(unsigned int nr)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 34892758f09..a931409c8fe 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -502,3 +502,126 @@ int __init setup_profiling_timer(unsigned int multiplier)
 {
 	return -EINVAL;
 }
+
+static int
+on_each_cpu_mask(void (*func)(void *), void *info, int retry, int wait,
+		 cpumask_t mask)
+{
+	int ret = 0;
+
+	preempt_disable();
+
+	ret = smp_call_function_on_cpu(func, info, retry, wait, mask);
+	if (cpu_isset(smp_processor_id(), mask))
+		func(info);
+
+	preempt_enable();
+
+	return ret;
+}
+
+/**********************************************************************/
+
+/*
+ * TLB operations
+ */
+struct tlb_args {
+	struct vm_area_struct *ta_vma;
+	unsigned long ta_start;
+	unsigned long ta_end;
+};
+
+static inline void ipi_flush_tlb_all(void *ignored)
+{
+	local_flush_tlb_all();
+}
+
+static inline void ipi_flush_tlb_mm(void *arg)
+{
+	struct mm_struct *mm = (struct mm_struct *)arg;
+
+	local_flush_tlb_mm(mm);
+}
+
+static inline void ipi_flush_tlb_page(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_kernel_page(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_kernel_page(ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_range(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+}
+
+static inline void ipi_flush_tlb_kernel_range(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end);
+}
+
+void flush_tlb_all(void)
+{
+	on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	cpumask_t mask = mm->cpu_vm_mask;
+
+	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, 1, mask);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
+	struct tlb_args ta;
+
+	ta.ta_vma = vma;
+	ta.ta_start = uaddr;
+
+	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, 1, mask);
+}
+
+void flush_tlb_kernel_page(unsigned long kaddr)
+{
+	struct tlb_args ta;
+
+	ta.ta_start = kaddr;
+
+	on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1, 1);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma,
+                     unsigned long start, unsigned long end)
+{
+	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
+	struct tlb_args ta;
+
+	ta.ta_vma = vma;
+	ta.ta_start = start;
+	ta.ta_end = end;
+
+	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, 1, mask);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	struct tlb_args ta;
+
+	ta.ta_start = start;
+	ta.ta_end = end;
+
+	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1, 1);
+}
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index c0e65833ffc..8725d63e421 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -11,7 +11,7 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   strnlen_user.o strchr.o strrchr.o testchangebit.o  \
 		   testclearbit.o testsetbit.o uaccess.o getuser.o    \
 		   putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o   \
-		   ucmpdi2.o udivdi3.o lib1funcs.o div64.o	      \
+		   ucmpdi2.o lib1funcs.o div64.o	              \
 		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o
 
 ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/longlong.h b/arch/arm/lib/longlong.h
deleted file mode 100644
index 90ae647e4d7..00000000000
--- a/arch/arm/lib/longlong.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/* longlong.h -- based on code from gcc-2.95.3
-
-   definitions for mixed size 32/64 bit arithmetic.
-   Copyright (C) 1991, 92, 94, 95, 96, 1997, 1998 Free Software Foundation, Inc.
-
-   This definition file is free software; you can redistribute it
-   and/or modify it under the terms of the GNU General Public
-   License as published by the Free Software Foundation; either
-   version 2, or (at your option) any later version.
-
-   This definition file is distributed in the hope that it will be
-   useful, but WITHOUT ANY WARRANTY; without even the implied
-   warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-   See the GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* Borrowed from GCC 2.95.3, I Molton 29/07/01 */
-
-#ifndef SI_TYPE_SIZE
-#define SI_TYPE_SIZE 32
-#endif
-
-#define __BITS4 (SI_TYPE_SIZE / 4)
-#define __ll_B (1L << (SI_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((u32) (t) % __ll_B)
-#define __ll_highpart(t) ((u32) (t) / __ll_B)
-
-/* Define auxiliary asm macros.
-
-   1) umul_ppmm(high_prod, low_prod, multipler, multiplicand)
-   multiplies two u32 integers MULTIPLER and MULTIPLICAND,
-   and generates a two-part u32 product in HIGH_PROD and
-   LOW_PROD.
-
-   2) __umulsidi3(a,b) multiplies two u32 integers A and B,
-   and returns a u64 product.  This is just a variant of umul_ppmm.
-
-   3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
-   denominator) divides a two-word unsigned integer, composed by the
-   integers HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and
-   places the quotient in QUOTIENT and the remainder in REMAINDER.
-   HIGH_NUMERATOR must be less than DENOMINATOR for correct operation.
-   If, in addition, the most significant bit of DENOMINATOR must be 1,
-   then the pre-processor symbol UDIV_NEEDS_NORMALIZATION is defined to 1.
-
-   4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
-   denominator).  Like udiv_qrnnd but the numbers are signed.  The
-   quotient is rounded towards 0.
-
-   5) count_leading_zeros(count, x) counts the number of zero-bits from
-   the msb to the first non-zero bit.  This is the number of steps X
-   needs to be shifted left to set the msb.  Undefined for X == 0.
-
-   6) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1,
-   high_addend_2, low_addend_2) adds two two-word unsigned integers,
-   composed by HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and
-   LOW_ADDEND_2 respectively.  The result is placed in HIGH_SUM and
-   LOW_SUM.  Overflow (i.e. carry out) is not stored anywhere, and is
-   lost.
-
-   7) sub_ddmmss(high_difference, low_difference, high_minuend,
-   low_minuend, high_subtrahend, low_subtrahend) subtracts two
-   two-word unsigned integers, composed by HIGH_MINUEND_1 and
-   LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and LOW_SUBTRAHEND_2
-   respectively.  The result is placed in HIGH_DIFFERENCE and
-   LOW_DIFFERENCE.  Overflow (i.e. carry out) is not stored anywhere,
-   and is lost.
-
-   If any of these macros are left undefined for a particular CPU,
-   C macros are used.  */
-
-#if defined (__arm__)
-#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
-  __asm__ ("adds	%1, %4, %5					\n\
-	adc	%0, %2, %3"						\
-	   : "=r" ((u32) (sh)),					\
-	     "=&r" ((u32) (sl))					\
-	   : "%r" ((u32) (ah)),					\
-	     "rI" ((u32) (bh)),					\
-	     "%r" ((u32) (al)),					\
-	     "rI" ((u32) (bl)))
-#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
-  __asm__ ("subs	%1, %4, %5					\n\
-	sbc	%0, %2, %3"						\
-	   : "=r" ((u32) (sh)),					\
-	     "=&r" ((u32) (sl))					\
-	   : "r" ((u32) (ah)),					\
-	     "rI" ((u32) (bh)),					\
-	     "r" ((u32) (al)),					\
-	     "rI" ((u32) (bl)))
-#define umul_ppmm(xh, xl, a, b) \
-{register u32 __t0, __t1, __t2;					\
-  __asm__ ("%@ Inlined umul_ppmm					\n\
-	mov	%2, %5, lsr #16						\n\
-	mov	%0, %6, lsr #16						\n\
-	bic	%3, %5, %2, lsl #16					\n\
-	bic	%4, %6, %0, lsl #16					\n\
-	mul	%1, %3, %4						\n\
-	mul	%4, %2, %4						\n\
-	mul	%3, %0, %3						\n\
-	mul	%0, %2, %0						\n\
-	adds	%3, %4, %3						\n\
-	addcs	%0, %0, #65536						\n\
-	adds	%1, %1, %3, lsl #16					\n\
-	adc	%0, %0, %3, lsr #16"					\
-	   : "=&r" ((u32) (xh)),					\
-	     "=r" ((u32) (xl)),					\
-	     "=&r" (__t0), "=&r" (__t1), "=r" (__t2)			\
-	   : "r" ((u32) (a)),					\
-	     "r" ((u32) (b)));}
-#define UMUL_TIME 20
-#define UDIV_TIME 100
-#endif				/* __arm__ */
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;							\
-    umul_ppmm (__w.s.high, __w.s.low, u, v);				\
-    __w.ll; })
-
-#define __udiv_qrnnd_c(q, r, n1, n0, d) \
-  do {									\
-    u32 __d1, __d0, __q1, __q0;					\
-    u32 __r1, __r0, __m;						\
-    __d1 = __ll_highpart (d);						\
-    __d0 = __ll_lowpart (d);						\
-									\
-    __r1 = (n1) % __d1;							\
-    __q1 = (n1) / __d1;							\
-    __m = (u32) __q1 * __d0;					\
-    __r1 = __r1 * __ll_B | __ll_highpart (n0);				\
-    if (__r1 < __m)							\
-      {									\
-	__q1--, __r1 += (d);						\
-	if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
-	  if (__r1 < __m)						\
-	    __q1--, __r1 += (d);					\
-      }									\
-    __r1 -= __m;							\
-									\
-    __r0 = __r1 % __d1;							\
-    __q0 = __r1 / __d1;							\
-    __m = (u32) __q0 * __d0;					\
-    __r0 = __r0 * __ll_B | __ll_lowpart (n0);				\
-    if (__r0 < __m)							\
-      {									\
-	__q0--, __r0 += (d);						\
-	if (__r0 >= (d))						\
-	  if (__r0 < __m)						\
-	    __q0--, __r0 += (d);					\
-      }									\
-    __r0 -= __m;							\
-									\
-    (q) = (u32) __q1 * __ll_B | __q0;				\
-    (r) = __r0;								\
-  } while (0)
-
-#define UDIV_NEEDS_NORMALIZATION 1
-#define udiv_qrnnd __udiv_qrnnd_c
-
-#define count_leading_zeros(count, x) \
-  do {									\
-    u32 __xr = (x);							\
-    u32 __a;							\
-									\
-    if (SI_TYPE_SIZE <= 32)						\
-      {									\
-	__a = __xr < ((u32)1<<2*__BITS4)				\
-	  ? (__xr < ((u32)1<<__BITS4) ? 0 : __BITS4)		\
-	  : (__xr < ((u32)1<<3*__BITS4) ?  2*__BITS4 : 3*__BITS4);	\
-      }									\
-    else								\
-      {									\
-	for (__a = SI_TYPE_SIZE - 8; __a > 0; __a -= 8)			\
-	  if (((__xr >> __a) & 0xff) != 0)				\
-	    break;							\
-      }									\
-									\
-    (count) = SI_TYPE_SIZE - (__clz_tab[__xr >> __a] + __a);		\
-  } while (0)
diff --git a/arch/arm/lib/udivdi3.c b/arch/arm/lib/udivdi3.c
deleted file mode 100644
index e343be4c664..00000000000
--- a/arch/arm/lib/udivdi3.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include "gcclib.h"
-#include "longlong.h"
-
-static const u8 __clz_tab[] = {
-	0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5,
-	    5, 5, 5, 5, 5, 5, 5, 5,
-	6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
-	    6, 6, 6, 6, 6, 6, 6, 6,
-	7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-	    7, 7, 7, 7, 7, 7, 7, 7,
-	7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-	    7, 7, 7, 7, 7, 7, 7, 7,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-};
-
-u64 __udivmoddi4(u64 n, u64 d, u64 * rp)
-{
-	DIunion ww;
-	DIunion nn, dd;
-	DIunion rr;
-	u32 d0, d1, n0, n1, n2;
-	u32 q0, q1;
-	u32 b, bm;
-
-	nn.ll = n;
-	dd.ll = d;
-
-	d0 = dd.s.low;
-	d1 = dd.s.high;
-	n0 = nn.s.low;
-	n1 = nn.s.high;
-
-	if (d1 == 0) {
-		if (d0 > n1) {
-			/* 0q = nn / 0D */
-
-			count_leading_zeros(bm, d0);
-
-			if (bm != 0) {
-				/* Normalize, i.e. make the most significant bit of the
-				   denominator set.  */
-
-				d0 = d0 << bm;
-				n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm));
-				n0 = n0 << bm;
-			}
-
-			udiv_qrnnd(q0, n0, n1, n0, d0);
-			q1 = 0;
-
-			/* Remainder in n0 >> bm.  */
-		} else {
-			/* qq = NN / 0d */
-
-			if (d0 == 0)
-				d0 = 1 / d0;	/* Divide intentionally by zero.  */
-
-			count_leading_zeros(bm, d0);
-
-			if (bm == 0) {
-				/* From (n1 >= d0) /\ (the most significant bit of d0 is set),
-				   conclude (the most significant bit of n1 is set) /\ (the
-				   leading quotient digit q1 = 1).
-
-				   This special case is necessary, not an optimization.
-				   (Shifts counts of SI_TYPE_SIZE are undefined.)  */
-
-				n1 -= d0;
-				q1 = 1;
-			} else {
-				/* Normalize.  */
-
-				b = SI_TYPE_SIZE - bm;
-
-				d0 = d0 << bm;
-				n2 = n1 >> b;
-				n1 = (n1 << bm) | (n0 >> b);
-				n0 = n0 << bm;
-
-				udiv_qrnnd(q1, n1, n2, n1, d0);
-			}
-
-			/* n1 != d0...  */
-
-			udiv_qrnnd(q0, n0, n1, n0, d0);
-
-			/* Remainder in n0 >> bm.  */
-		}
-
-		if (rp != 0) {
-			rr.s.low = n0 >> bm;
-			rr.s.high = 0;
-			*rp = rr.ll;
-		}
-	} else {
-		if (d1 > n1) {
-			/* 00 = nn / DD */
-
-			q0 = 0;
-			q1 = 0;
-
-			/* Remainder in n1n0.  */
-			if (rp != 0) {
-				rr.s.low = n0;
-				rr.s.high = n1;
-				*rp = rr.ll;
-			}
-		} else {
-			/* 0q = NN / dd */
-
-			count_leading_zeros(bm, d1);
-			if (bm == 0) {
-				/* From (n1 >= d1) /\ (the most significant bit of d1 is set),
-				   conclude (the most significant bit of n1 is set) /\ (the
-				   quotient digit q0 = 0 or 1).
-
-				   This special case is necessary, not an optimization.  */
-
-				/* The condition on the next line takes advantage of that
-				   n1 >= d1 (true due to program flow).  */
-				if (n1 > d1 || n0 >= d0) {
-					q0 = 1;
-					sub_ddmmss(n1, n0, n1, n0, d1, d0);
-				} else
-					q0 = 0;
-
-				q1 = 0;
-
-				if (rp != 0) {
-					rr.s.low = n0;
-					rr.s.high = n1;
-					*rp = rr.ll;
-				}
-			} else {
-				u32 m1, m0;
-				/* Normalize.  */
-
-				b = SI_TYPE_SIZE - bm;
-
-				d1 = (d1 << bm) | (d0 >> b);
-				d0 = d0 << bm;
-				n2 = n1 >> b;
-				n1 = (n1 << bm) | (n0 >> b);
-				n0 = n0 << bm;
-
-				udiv_qrnnd(q0, n1, n2, n1, d1);
-				umul_ppmm(m1, m0, q0, d0);
-
-				if (m1 > n1 || (m1 == n1 && m0 > n0)) {
-					q0--;
-					sub_ddmmss(m1, m0, m1, m0, d1, d0);
-				}
-
-				q1 = 0;
-
-				/* Remainder in (n1n0 - m1m0) >> bm.  */
-				if (rp != 0) {
-					sub_ddmmss(n1, n0, n1, n0, m1, m0);
-					rr.s.low = (n1 << b) | (n0 >> bm);
-					rr.s.high = n1 >> bm;
-					*rp = rr.ll;
-				}
-			}
-		}
-	}
-
-	ww.s.low = q0;
-	ww.s.high = q1;
-	return ww.ll;
-}
-
-u64 __udivdi3(u64 n, u64 d)
-{
-	return __udivmoddi4(n, d, (u64 *) 0);
-}
-
-u64 __umoddi3(u64 u, u64 v)
-{
-	u64 w;
-
-	(void)__udivmoddi4(u, v, &w);
-
-	return w;
-}
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 9222e57bd87..dacbf504dae 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -20,6 +20,7 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/amba.h>
+#include <asm/hardware/arm_timer.h>
 #include <asm/arch/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
@@ -156,16 +157,6 @@ EXPORT_SYMBOL(cm_control);
 #define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
 #endif
 
-/*
- * What does it look like?
- */
-typedef struct TimerStruct {
-	unsigned long TimerLoad;
-	unsigned long TimerValue;
-	unsigned long TimerControl;
-	unsigned long TimerClear;
-} TimerStruct_t;
-
 static unsigned long timer_reload;
 
 /*
@@ -174,7 +165,6 @@ static unsigned long timer_reload;
  */
 unsigned long integrator_gettimeoffset(void)
 {
-	volatile TimerStruct_t *timer1 = (TimerStruct_t *)TIMER1_VA_BASE;
 	unsigned long ticks1, ticks2, status;
 
 	/*
@@ -183,11 +173,11 @@ unsigned long integrator_gettimeoffset(void)
 	 * an interrupt.  We get around this by ensuring that the
 	 * counter has not reloaded between our two reads.
 	 */
-	ticks2 = timer1->TimerValue & 0xffff;
+	ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
 	do {
 		ticks1 = ticks2;
 		status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
-		ticks2 = timer1->TimerValue & 0xffff;
+		ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
 	} while (ticks2 > ticks1);
 
 	/*
@@ -213,14 +203,12 @@ unsigned long integrator_gettimeoffset(void)
 static irqreturn_t
 integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
-	volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
-
 	write_seqlock(&xtime_lock);
 
 	/*
 	 * clear the interrupt
 	 */
-	timer1->TimerClear = 1;
+	writel(1, TIMER1_VA_BASE + TIMER_INTCLR);
 
 	/*
 	 * the clock tick routines are only processed on the
@@ -256,32 +244,29 @@ static struct irqaction integrator_timer_irq = {
  */
 void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
 {
-	volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
-	volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
-	volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
-	unsigned int timer_ctrl = 0x80 | 0x40;	/* periodic */
+	unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
 
 	timer_reload = reload;
 	timer_ctrl |= ctrl;
 
 	if (timer_reload > 0x100000) {
 		timer_reload >>= 8;
-		timer_ctrl |= 0x08; /* /256 */
+		timer_ctrl |= TIMER_CTRL_DIV256;
 	} else if (timer_reload > 0x010000) {
 		timer_reload >>= 4;
-		timer_ctrl |= 0x04; /* /16 */
+		timer_ctrl |= TIMER_CTRL_DIV16;
 	}
 
 	/*
 	 * Initialise to a known state (all timers off)
 	 */
-	timer0->TimerControl = 0;
-	timer1->TimerControl = 0;
-	timer2->TimerControl = 0;
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 
-	timer1->TimerLoad    = timer_reload;
-	timer1->TimerValue   = timer_reload;
-	timer1->TimerControl = timer_ctrl;
+	writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD);
+	writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE);
+	writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL);
 
 	/*
 	 * Make irqs happen for the system timer
diff --git a/arch/arm/mach-omap/pm.c b/arch/arm/mach-omap/pm.c
index 00fac155df2..6b03ccdc1e9 100644
--- a/arch/arm/mach-omap/pm.c
+++ b/arch/arm/mach-omap/pm.c
@@ -41,7 +41,9 @@
 #include <linux/pm.h>
 
 #include <asm/io.h>
+#include <asm/mach/time.h>
 #include <asm/mach-types.h>
+
 #include <asm/arch/omap16xx.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/mux.h>
@@ -80,13 +82,13 @@ void omap_pm_idle(void)
 		return;
 	}
 	mask32 = omap_readl(ARM_SYSST);
-	local_fiq_enable();
-	local_irq_enable();
 
-#if defined(CONFIG_OMAP_32K_TIMER) && defined(CONFIG_NO_IDLE_HZ)
-	/* Override timer to use VST for the next cycle */
-	omap_32k_timer_next_vst_interrupt();
-#endif
+	/*
+	 * Since an interrupt may set up a timer, we don't want to
+	 * reprogram the hardware timer with interrupts enabled.
+	 * Re-enable interrupts only after returning from idle.
+	 */
+	timer_dyn_reprogram();
 
 	if ((mask32 & DSP_IDLE) == 0) {
 		__asm__ volatile ("mcr	p15, 0, r0, c7, c0, 4");
@@ -102,6 +104,8 @@ void omap_pm_idle(void)
 
 		func_ptr();
 	}
+	local_fiq_enable();
+	local_irq_enable();
 }
 
 /*
diff --git a/arch/arm/mach-omap/time.c b/arch/arm/mach-omap/time.c
index 589e8b2740d..dd34e9f4c41 100644
--- a/arch/arm/mach-omap/time.c
+++ b/arch/arm/mach-omap/time.c
@@ -4,7 +4,7 @@
  * OMAP Timers
  *
  * Copyright (C) 2004 Nokia Corporation
- * Partial timer rewrite and additional VST timer support by
+ * Partial timer rewrite and additional dynamic tick timer support by
  * Tony Lindgen <tony@atomide.com> and
  * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
@@ -261,7 +261,6 @@ unsigned long long sched_clock(void)
  * so with HZ = 100, TVR = 327.68.
  */
 #define OMAP_32K_TIMER_TICK_PERIOD	((32768 / HZ) - 1)
-#define MAX_SKIP_JIFFIES		25
 #define TIMER_32K_SYNCHRONIZED		0xfffbc410
 
 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate)			\
@@ -347,6 +346,42 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_NO_IDLE_HZ
+/*
+ * Programs the next timer interrupt needed. Called when dynamic tick is
+ * enabled, and to reprogram the ticks to skip from pm_idle. Note that
+ * we can keep the timer continuous, and don't need to set it to run in
+ * one-shot mode. This is because the timer will get reprogrammed again
+ * after next interrupt.
+ */
+void omap_32k_timer_reprogram(unsigned long next_tick)
+{
+	omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1);
+}
+
+static struct irqaction omap_32k_timer_irq;
+extern struct timer_update_handler timer_update;
+
+static int omap_32k_timer_enable_dyn_tick(void)
+{
+	/* No need to reprogram timer, just use the next interrupt */
+	return 0;
+}
+
+static int omap_32k_timer_disable_dyn_tick(void)
+{
+	omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+	return 0;
+}
+
+static struct dyn_tick_timer omap_dyn_tick_timer = {
+	.enable		= omap_32k_timer_enable_dyn_tick,
+	.disable	= omap_32k_timer_disable_dyn_tick,
+	.reprogram	= omap_32k_timer_reprogram,
+	.handler	= omap_32k_timer_interrupt,
+};
+#endif	/* CONFIG_NO_IDLE_HZ */
+
 static struct irqaction omap_32k_timer_irq = {
 	.name		= "32KHz timer",
 	.flags		= SA_INTERRUPT | SA_TIMER,
@@ -355,6 +390,11 @@ static struct irqaction omap_32k_timer_irq = {
 
 static __init void omap_init_32k_timer(void)
 {
+
+#ifdef CONFIG_NO_IDLE_HZ
+	omap_timer.dyn_tick = &omap_dyn_tick_timer;
+#endif
+
 	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
 	omap_timer.offset  = omap_32k_timer_gettimeoffset;
 	omap_32k_last_tick = omap_32k_sync_timer_read();
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 534df0c6c77..d4d03d0daae 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -154,6 +154,11 @@ config S3C2410_PM_CHECK_CHUNKSIZE
 	  the CRC data block will take more memory, but wil identify any
 	  faults with better precision.
 
+config PM_SIMTEC
+	bool
+	depends on PM && (ARCH_BAST || MACH_VR1000)
+	default y
+
 config S3C2410_LOWLEVEL_UART_PORT
 	int "S3C2410 UART to use for low-level messages"
 	default 0
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 7c379aad5d6..f99b689e439 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_S3C2410_DMA)  += dma.o
 # Power Management support
 
 obj-$(CONFIG_PM)	   += pm.o sleep.o
+obj-$(CONFIG_PM_SIMTEC)	   += pm-simtec.o
 
 # S3C2440 support
 
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index 64792f67866..4664bd11adc 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -96,8 +96,8 @@ struct platform_device s3c_device_lcd = {
 	.num_resources	  = ARRAY_SIZE(s3c_lcd_resource),
 	.resource	  = s3c_lcd_resource,
 	.dev              = {
-		.dma_mask = &s3c_device_lcd_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
+		.dma_mask		= &s3c_device_lcd_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL
 	}
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index f3e970039b6..549bcb1f32c 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -27,6 +27,7 @@
  *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
  *     14-Mar-2006 BJD  Updated for __iomem changes
  *     22-Jun-2006 BJD  Added DM9000 platform information
+ *     28-Jun-2006 BJD  Moved pm functionality out to common code
 */
 
 #include <linux/kernel.h>
@@ -67,7 +68,6 @@
 #include "devs.h"
 #include "cpu.h"
 #include "usb-simtec.h"
-#include "pm.h"
 
 #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
 
@@ -405,44 +405,13 @@ void __init bast_map_io(void)
 	usb_simtec_init();
 }
 
-void __init bast_init_irq(void)
-{
-	s3c24xx_init_irq();
-}
-
-#ifdef CONFIG_PM
-
-/* bast_init_machine
- *
- * enable the power management functions for the EB2410ITX
-*/
-
-static __init void bast_init_machine(void)
-{
-	unsigned long gstatus4;
-
-	printk(KERN_INFO "BAST Power Manangement" COPYRIGHT "\n");
-
-	gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
-	gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
-	gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
-
-	__raw_writel(gstatus4, S3C2410_GSTATUS4);
-
-	s3c2410_pm_init();
-}
-
-#else
-#define bast_init_machine NULL
-#endif
-
 
 MACHINE_START(BAST, "Simtec-BAST")
      MAINTAINER("Ben Dooks <ben@simtec.co.uk>")
      BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
      BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
-     MAPIO(bast_map_io)
-     INITIRQ(bast_init_irq)
-	.init_machine	= bast_init_machine,
+
+	.map_io		= bast_map_io,
+	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 76be074944a..1db2855e3e5 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -371,16 +371,12 @@ void __init vr1000_map_io(void)
 	usb_simtec_init();
 }
 
-void __init vr1000_init_irq(void)
-{
-	s3c24xx_init_irq();
-}
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
      MAINTAINER("Ben Dooks <ben@simtec.co.uk>")
      BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
      BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
-     MAPIO(vr1000_map_io)
-     INITIRQ(vr1000_init_irq)
+	.map_io		= vr1000_map_io,
+	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c
new file mode 100644
index 00000000000..2cb79883222
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pm-simtec.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s3c2410/pm-simtec.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * Power Management helpers for Simtec S3C24XX implementations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+
+#include <asm/mach-types.h>
+
+#include "pm.h"
+
+#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+
+/* pm_simtec_init
+ *
+ * enable the power management functions
+*/
+
+static __init int pm_simtec_init(void)
+{
+	unsigned long gstatus4;
+
+	/* check which machine we are running on */
+
+	if (!machine_is_bast() && !machine_is_vr1000())
+		return 0;
+
+	printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
+
+	gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
+	gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
+	gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
+
+	__raw_writel(gstatus4, S3C2410_GSTATUS4);
+
+	return s3c2410_pm_init();
+}
+
+arch_initcall(pm_simtec_init);
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 9d1f2253e98..f01c0f8a2bb 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -33,6 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/amba_clcd.h>
+#include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst307.h>
 
 #include <asm/mach/arch.h>
@@ -788,38 +789,25 @@ void __init versatile_init(void)
  */
 #define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
 #if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)		/* Divide by 256 */
-#define TIMER_CTRL	0x88				/* Enable, Clock / 256 */
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
 #define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
 #elif TIMER_INTERVAL >= 0x10000
 #define TIMER_RELOAD	(TIMER_INTERVAL >> 4)		/* Divide by 16 */
-#define TIMER_CTRL	0x84				/* Enable, Clock / 16 */
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
 #define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
 #else
 #define TIMER_RELOAD	(TIMER_INTERVAL)
-#define TIMER_CTRL	0x80				/* Enable */
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
 #define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
 #endif
 
-#define TIMER_CTRL_IE	(1 << 5)	/* Interrupt Enable */
-
-/*
- * What does it look like?
- */
-typedef struct TimerStruct {
-	unsigned long TimerLoad;
-	unsigned long TimerValue;
-	unsigned long TimerControl;
-	unsigned long TimerClear;
-} TimerStruct_t;
-
 /*
  * Returns number of ms since last clock interrupt.  Note that interrupts
  * will have been disabled by do_gettimeoffset()
  */
 static unsigned long versatile_gettimeoffset(void)
 {
-	volatile TimerStruct_t *timer0 = (TimerStruct_t *)TIMER0_VA_BASE;
 	unsigned long ticks1, ticks2, status;
 
 	/*
@@ -828,11 +816,11 @@ static unsigned long versatile_gettimeoffset(void)
 	 * an interrupt.  We get around this by ensuring that the
 	 * counter has not reloaded between our two reads.
 	 */
-	ticks2 = timer0->TimerValue & 0xffff;
+	ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 	do {
 		ticks1 = ticks2;
 		status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS);
-		ticks2 = timer0->TimerValue & 0xffff;
+		ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 	} while (ticks2 > ticks1);
 
 	/*
@@ -859,12 +847,10 @@ static unsigned long versatile_gettimeoffset(void)
  */
 static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
-	volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
-
 	write_seqlock(&xtime_lock);
 
 	// ...clear the interrupt
-	timer0->TimerClear = 1;
+	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
 
 	timer_tick(regs);
 
@@ -884,31 +870,32 @@ static struct irqaction versatile_timer_irq = {
  */
 static void __init versatile_timer_init(void)
 {
-	volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
-	volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
-	volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
-	volatile TimerStruct_t *timer3 = (volatile TimerStruct_t *)TIMER3_VA_BASE;
+	u32 val;
 
 	/* 
 	 * set clock frequency: 
 	 *	VERSATILE_REFCLK is 32KHz
 	 *	VERSATILE_TIMCLK is 1MHz
 	 */
-	*(volatile unsigned int *)IO_ADDRESS(VERSATILE_SCTL_BASE) |= 
-	  ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | 
-	   (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel));
+	val = readl(IO_ADDRESS(VERSATILE_SCTL_BASE));
+	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | 
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
+	       IO_ADDRESS(VERSATILE_SCTL_BASE));
 
 	/*
 	 * Initialise to a known state (all timers off)
 	 */
-	timer0->TimerControl = 0;
-	timer1->TimerControl = 0;
-	timer2->TimerControl = 0;
-	timer3->TimerControl = 0;
-
-	timer0->TimerLoad    = TIMER_RELOAD;
-	timer0->TimerValue   = TIMER_RELOAD;
-	timer0->TimerControl = TIMER_CTRL | 0x40 | TIMER_CTRL_IE;  /* periodic + IE */
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+	writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+	writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
+	writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
+	       TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
 
 	/* 
 	 * Make irqs happen for the system timer
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 6dcb23d64bf..edffa47a4b2 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -437,7 +437,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
 	memtable_init(mi);
 	if (mdesc->map_io)
 		mdesc->map_io();
-	flush_tlb_all();
+	local_flush_tlb_all();
 
 	/*
 	 * initialise the zones within each node
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index 052ab443ec4..c3bd503b43a 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -682,7 +682,7 @@ void __init memtable_init(struct meminfo *mi)
 	}
 
 	flush_cache_all();
-	flush_tlb_all();
+	local_flush_tlb_all();
 
 	top_pmd = pmd_off_k(0xffff0000);
 }
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 55a02bc994a..4b97950984e 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -117,7 +117,13 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m)
 	if (nh >= m)
 		return ~0ULL;
 	mh = m >> 32;
-	z = (mh << 32 <= nh) ? 0xffffffff00000000ULL : (nh / mh) << 32;
+	if (mh << 32 <= nh) {
+		z = 0xffffffff00000000ULL;
+	} else {
+		z = nh;
+		do_div(z, mh);
+		z <<= 32;
+	}
 	mul64to128(&termh, &terml, m, z);
 	sub128(&remh, &reml, nh, nl, termh, terml);
 	ml = m << 32;
@@ -126,7 +132,12 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m)
 		add128(&remh, &reml, remh, reml, mh, ml);
 	}
 	remh = (remh << 32) | (reml >> 32);
-	z |= (mh << 32 <= remh) ? 0xffffffff : remh / mh;
+	if (mh << 32 <= remh) {
+		z |= 0xffffffff;
+	} else {
+		do_div(remh, mh);
+		z |= remh;
+	}
 	return z;
 }
 
diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c
index fa3053e84db..b801cd66b6e 100644
--- a/arch/arm/vfp/vfpdouble.c
+++ b/arch/arm/vfp/vfpdouble.c
@@ -32,6 +32,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/bitops.h>
+
+#include <asm/div64.h>
 #include <asm/ptrace.h>
 #include <asm/vfp.h>
 
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 3aeedd2afc7..22f3da4e082 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -89,7 +89,7 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
 	current->thread.error_code = 0;
 	current->thread.trap_no = 6;
 
-	force_sig_info(SIGFPE, &info, current);
+	send_sig_info(SIGFPE, &info, current);
 }
 
 static void vfp_panic(char *reason)
diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c
index 6849fe35cb2..14dd696ddeb 100644
--- a/arch/arm/vfp/vfpsingle.c
+++ b/arch/arm/vfp/vfpsingle.c
@@ -32,6 +32,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/bitops.h>
+
+#include <asm/div64.h>
 #include <asm/ptrace.h>
 #include <asm/vfp.h>
 
@@ -303,7 +305,11 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand)
 		if (z <= a)
 			return (s32)a >> 1;
 	}
-	return (u32)(((u64)a << 31) / z) + (z >> 1);
+	{
+		u64 v = (u64)a << 31;
+		do_div(v, z);
+		return v + (z >> 1);
+	}
 }
 
 static u32 vfp_single_fsqrt(int sd, int unused, s32 m, u32 fpscr)
@@ -1107,7 +1113,11 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr)
 		vsn.significand >>= 1;
 		vsd.exponent++;
 	}
-	vsd.significand = ((u64)vsn.significand << 32) / vsm.significand;
+	{
+		u64 significand = (u64)vsn.significand << 32;
+		do_div(significand, vsm.significand);
+		vsd.significand = significand;
+	}
 	if ((vsd.significand & 0x3f) == 0)
 		vsd.significand |= ((u64)vsm.significand * vsd.significand != (u64)vsn.significand << 32);
 
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 487d2e36b0a..c0561398030 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -99,7 +99,7 @@ CONFIG_ACPI_DEALLOCATE_IRQ=y
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
-# CONFIG_EFI_PCDP is not set
+CONFIG_EFI_PCDP=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
@@ -650,7 +650,7 @@ CONFIG_MMTIMER=y
 #
 # Console display driver support
 #
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_VGA_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 
 #
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 47f45341ac6..73454eee26f 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-20050621
-# Tue Jun 21 14:03:24 2005
+# Linux kernel version: 2.6.13-rc1-20050629
+# Wed Jun 29 15:28:12 2005
 #
 
 #
@@ -80,18 +80,29 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
 # CONFIG_NUMA is not set
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=18
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -257,6 +268,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -395,6 +407,7 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -407,6 +420,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_IP_TCPDIAG=y
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -598,9 +613,7 @@ CONFIG_GAMEPORT=m
 # CONFIG_GAMEPORT_NS558 is not set
 # CONFIG_GAMEPORT_L4 is not set
 # CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
 # CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461X is not set
 
 #
 # Character devices
@@ -629,7 +642,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -743,6 +755,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -779,9 +792,11 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -838,7 +853,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -857,12 +872,17 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -922,7 +942,6 @@ CONFIG_NTFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 CONFIG_TMPFS_XATTR=y
@@ -953,15 +972,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -1069,6 +1091,7 @@ CONFIG_LOG_BUF_SHIFT=20
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1090,7 +1113,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 21d6f9bab5e..b7755e4436d 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10
-# Wed Dec 29 09:05:48 2004
+# Linux kernel version: 2.6.13-rc1-20050629
+# Wed Jun 29 15:31:11 2005
 #
 
 #
@@ -12,6 +12,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -24,23 +25,26 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=17
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -59,12 +63,15 @@ CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 CONFIG_IA64_HP_ZX1=y
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 # CONFIG_IA64_SGI_SN2 is not set
 # CONFIG_IA64_HP_SIM is not set
 # CONFIG_ITANIUM is not set
@@ -73,22 +80,36 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
 # CONFIG_NUMA is not set
 CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=18
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 # CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_ACPI_DEALLOCATE_IRQ=y
 
 #
 # Firmware Drivers
@@ -120,6 +141,7 @@ CONFIG_ACPI_BUS=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_PCI=y
 CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_CONTAINER is not set
 
 #
 # Bus options (PCI, PCMCIA)
@@ -129,6 +151,7 @@ CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCI Hotplug Support
@@ -138,7 +161,6 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=y
 # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
 # CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 
 #
@@ -147,10 +169,6 @@ CONFIG_HOTPLUG_PCI_ACPI=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # Device Drivers
 #
 
@@ -184,6 +202,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -203,6 +222,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -246,6 +266,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -275,6 +296,7 @@ CONFIG_CHR_DEV_OSST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -288,6 +310,7 @@ CONFIG_SCSI_LOGGING=y
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -303,13 +326,10 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
@@ -319,8 +339,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
@@ -331,7 +349,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -344,9 +362,9 @@ CONFIG_SCSI_QLA2XXX=y
 #
 # Fusion MPT device support
 #
-CONFIG_FUSION=y
-CONFIG_FUSION_MAX_SGE=40
-# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -368,12 +386,12 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -386,6 +404,8 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -405,8 +425,6 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_ARPTABLES=y
 # CONFIG_IP_NF_ARPFILTER is not set
 # CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -483,7 +501,6 @@ CONFIG_NET_PCI=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -505,9 +522,11 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -565,18 +584,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -586,6 +593,16 @@ CONFIG_SERIO=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -603,7 +620,6 @@ CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -611,6 +627,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -644,6 +661,12 @@ CONFIG_DRM_RADEON=y
 # CONFIG_DRM_SIS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HPET is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -668,6 +691,7 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -691,10 +715,14 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -705,21 +733,29 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -746,6 +782,7 @@ CONFIG_VIDEO_DEV=y
 #
 # Video Adapters
 #
+# CONFIG_TUNER_MULTI_I2C is not set
 # CONFIG_VIDEO_BT848 is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
@@ -778,6 +815,11 @@ CONFIG_VIDEO_DEV=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -785,6 +827,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -801,6 +844,7 @@ CONFIG_FB_RADEON_DEBUG=y
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -820,6 +864,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -869,6 +914,8 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
 # CONFIG_SND_KORG1212 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -876,6 +923,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
 # CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_YMFPCI is not set
 # CONFIG_SND_ALS4000 is not set
@@ -893,13 +941,14 @@ CONFIG_SND_FM801_TEA575X=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_SONICVIBES is not set
 # CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
 
 #
 # USB devices
 #
 # CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
 
 #
 # Open Sound System
@@ -909,6 +958,8 @@ CONFIG_SND_FM801_TEA575X=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -920,8 +971,6 @@ CONFIG_USB_BANDWIDTH=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -929,7 +978,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 
@@ -947,12 +999,11 @@ CONFIG_USB_UHCI_HCD=y
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
@@ -966,9 +1017,11 @@ CONFIG_USB_HIDINPUT=y
 CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -978,7 +1031,6 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
 
 #
 # USB Multimedia devices
@@ -992,6 +1044,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_SE401 is not set
 # CONFIG_USB_SN9C102 is not set
 # CONFIG_USB_STV680 is not set
+# CONFIG_USB_PWC is not set
 
 #
 # USB Network Adapters
@@ -1001,6 +1054,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1016,7 +1070,6 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -1025,9 +1078,11 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -1041,12 +1096,22 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_MMC is not set
 
 #
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_POSIX_ACL is not set
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -1056,6 +1121,10 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1089,7 +1158,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 CONFIG_TMPFS_XATTR=y
@@ -1120,15 +1188,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
@@ -1209,6 +1280,8 @@ CONFIG_NLS_UTF8=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Profiling support
@@ -1218,14 +1291,18 @@ CONFIG_CRC32=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_KPROBES=y
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 CONFIG_IA64_PRINT_HAZARDS=y
@@ -1252,6 +1329,7 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index b8db6e3e5e8..11957598a8b 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -156,10 +156,13 @@
 */
 #define DELAYED_RESOURCE_CNT	64
 
+#define PCI_DEVICE_ID_HP_SX2000_IOC	0x12ec
+
 #define ZX1_IOC_ID	((PCI_DEVICE_ID_HP_ZX1_IOC << 16) | PCI_VENDOR_ID_HP)
 #define ZX2_IOC_ID	((PCI_DEVICE_ID_HP_ZX2_IOC << 16) | PCI_VENDOR_ID_HP)
 #define REO_IOC_ID	((PCI_DEVICE_ID_HP_REO_IOC << 16) | PCI_VENDOR_ID_HP)
 #define SX1000_IOC_ID	((PCI_DEVICE_ID_HP_SX1000_IOC << 16) | PCI_VENDOR_ID_HP)
+#define SX2000_IOC_ID	((PCI_DEVICE_ID_HP_SX2000_IOC << 16) | PCI_VENDOR_ID_HP)
 
 #define ZX1_IOC_OFFSET	0x1000	/* ACPI reports SBA, we want IOC */
 
@@ -1726,6 +1729,7 @@ static struct ioc_iommu ioc_iommu_info[] __initdata = {
 	{ ZX1_IOC_ID, "zx1", ioc_zx1_init },
 	{ ZX2_IOC_ID, "zx2", NULL },
 	{ SX1000_IOC_ID, "sx1000", NULL },
+	{ SX2000_IOC_ID, "sx2000", NULL },
 };
 
 static struct ioc * __init
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 786e70718ce..7a8ae0f4b38 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/serial.h>
 #include <linux/serialP.h>
+#include <linux/sysrq.h>
 
 #include <asm/irq.h>
 #include <asm/hw_irq.h>
@@ -149,12 +150,17 @@ static  void receive_chars(struct tty_struct *tty, struct pt_regs *regs)
 				seen_esc = 2;
 				continue;
 			} else if ( seen_esc == 2 ) {
-				if ( ch == 'P' ) show_state();		/* F1 key */
-#ifdef CONFIG_KDB
-				if ( ch == 'S' )
-					kdb(KDB_REASON_KEYBOARD, 0, (kdb_eframe_t) regs);
+				if ( ch == 'P' ) /* F1 */
+					show_state();
+#ifdef CONFIG_MAGIC_SYSRQ
+				if ( ch == 'S' ) { /* F4 */
+					do
+						ch = ia64_ssc(0, 0, 0, 0,
+							      SSC_GETCHAR);
+					while (!ch);
+					handle_sysrq(ch, regs, NULL);
+				}
 #endif
-
 				seen_esc = 0;
 				continue;
 			}
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 785a51b0ad8..69f88d561d6 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -470,18 +470,6 @@ ENTRY(load_switch_stack)
 	br.cond.sptk.many b7
 END(load_switch_stack)
 
-GLOBAL_ENTRY(__ia64_syscall)
-	.regstk 6,0,0,0
-	mov r15=in5				// put syscall number in place
-	break __BREAK_SYSCALL
-	movl r2=errno
-	cmp.eq p6,p7=-1,r10
-	;;
-(p6)	st4 [r2]=r8
-(p6)	mov r8=-1
-	br.ret.sptk.many rp
-END(__ia64_syscall)
-
 GLOBAL_ENTRY(execve)
 	mov r15=__NR_execve			// put syscall number in place
 	break __BREAK_SYSCALL
@@ -637,7 +625,7 @@ END(ia64_ret_from_syscall)
  *	      r8-r11: restored (syscall return value(s))
  *		 r12: restored (user-level stack pointer)
  *		 r13: restored (user-level thread pointer)
- *		 r14: cleared
+ *		 r14: set to __kernel_syscall_via_epc
  *		 r15: restored (syscall #)
  *	     r16-r17: cleared
  *		 r18: user-level b6
@@ -658,7 +646,7 @@ END(ia64_ret_from_syscall)
  *		  pr: restored (user-level pr)
  *		  b0: restored (user-level rp)
  *	          b6: restored
- *		  b7: cleared
+ *		  b7: set to __kernel_syscall_via_epc
  *	     ar.unat: restored (user-level ar.unat)
  *	      ar.pfs: restored (user-level ar.pfs)
  *	      ar.rsc: restored (user-level ar.rsc)
@@ -704,72 +692,79 @@ ENTRY(ia64_leave_syscall)
 	;;
 (p6)	ld4 r31=[r18]				// load current_thread_info()->flags
 	ld8 r19=[r2],PT(B6)-PT(LOADRS)		// load ar.rsc value for "loadrs"
-	mov b7=r0		// clear b7
+	nop.i 0
 	;;
-	ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE)	// load ar.bspstore (may be garbage)
+	mov r16=ar.bsp				// M2  get existing backing store pointer
 	ld8 r18=[r2],PT(R9)-PT(B6)		// load b6
 (p6)	and r15=TIF_WORK_MASK,r31		// any work other than TIF_SYSCALL_TRACE?
 	;;
-	mov r16=ar.bsp				// M2  get existing backing store pointer
+	ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE)	// load ar.bspstore (may be garbage)
 (p6)	cmp4.ne.unc p6,p0=r15, r0		// any special work pending?
 (p6)	br.cond.spnt .work_pending_syscall
 	;;
 	// start restoring the state saved on the kernel stack (struct pt_regs):
 	ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
 	ld8 r11=[r3],PT(CR_IIP)-PT(R11)
-	mov f6=f0		// clear f6
+(pNonSys) break 0		//      bug check: we shouldn't be here if pNonSys is TRUE!
 	;;
 	invala			// M0|1 invalidate ALAT
-	rsm psr.i | psr.ic	// M2 initiate turning off of interrupt and interruption collection
-	mov f9=f0		// clear f9
+	rsm psr.i | psr.ic	// M2   turn off interrupts and interruption collection
+	cmp.eq p9,p0=r0,r0	// A    set p9 to indicate that we should restore cr.ifs
 
-	ld8 r29=[r2],16		// load cr.ipsr
-	ld8 r28=[r3],16			// load cr.iip
-	mov f8=f0		// clear f8
+	ld8 r29=[r2],16		// M0|1 load cr.ipsr
+	ld8 r28=[r3],16		// M0|1 load cr.iip
+	mov r22=r0		// A    clear r22
 	;;
 	ld8 r30=[r2],16		// M0|1 load cr.ifs
 	ld8 r25=[r3],16		// M0|1 load ar.unat
-	cmp.eq p9,p0=r0,r0	// set p9 to indicate that we should restore cr.ifs
+(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
 	;;
 	ld8 r26=[r2],PT(B0)-PT(AR_PFS)	// M0|1 load ar.pfs
-(pKStk)	mov r22=psr		// M2 read PSR now that interrupts are disabled
-	mov f10=f0		// clear f10
+(pKStk)	mov r22=psr			// M2   read PSR now that interrupts are disabled
+	nop 0
 	;;
-	ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // load b0
-	ld8 r27=[r3],PT(PR)-PT(AR_RSC)	// load ar.rsc
-	mov f11=f0		// clear f11
+	ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
+	ld8 r27=[r3],PT(PR)-PT(AR_RSC)	// M0|1 load ar.rsc
+	mov f6=f0			// F    clear f6
 	;;
-	ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT)	// load ar.rnat (may be garbage)
-	ld8 r31=[r3],PT(R1)-PT(PR)		// load predicates
-(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
+	ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT)	// M0|1 load ar.rnat (may be garbage)
+	ld8 r31=[r3],PT(R1)-PT(PR)		// M0|1 load predicates
+	mov f7=f0				// F    clear f7
 	;;
-	ld8 r20=[r2],PT(R12)-PT(AR_FPSR)	// load ar.fpsr
-	ld8.fill r1=[r3],16	// load r1
-(pUStk) mov r17=1
+	ld8 r20=[r2],PT(R12)-PT(AR_FPSR)	// M0|1 load ar.fpsr
+	ld8.fill r1=[r3],16			// M0|1 load r1
+(pUStk) mov r17=1				// A
 	;;
-	srlz.d			// M0  ensure interruption collection is off
-	ld8.fill r13=[r3],16
-	mov f7=f0		// clear f7
+(pUStk) st1 [r14]=r17				// M2|3
+	ld8.fill r13=[r3],16			// M0|1
+	mov f8=f0				// F    clear f8
 	;;
-	ld8.fill r12=[r2]	// restore r12 (sp)
-	mov.m ar.ssd=r0		// M2 clear ar.ssd
-	mov r22=r0		// clear r22
+	ld8.fill r12=[r2]			// M0|1 restore r12 (sp)
+	ld8.fill r15=[r3]			// M0|1 restore r15
+	mov b6=r18				// I0   restore b6
 
-	ld8.fill r15=[r3]	// restore r15
-(pUStk) st1 [r14]=r17
-	addl r3=THIS_CPU(ia64_phys_stacked_size_p8),r0
+	addl r17=THIS_CPU(ia64_phys_stacked_size_p8),r0 // A
+	mov f9=f0					// F    clear f9
+(pKStk) br.cond.dpnt.many skip_rbs_switch		// B
+
+	srlz.d				// M0   ensure interruption collection is off (for cover)
+	shr.u r18=r19,16		// I0|1 get byte size of existing "dirty" partition
+	cover				// B    add current frame into dirty partition & set cr.ifs
 	;;
-(pUStk)	ld4 r17=[r3]		// r17 = cpu_data->phys_stacked_size_p8
-	mov.m ar.csd=r0		// M2 clear ar.csd
-	mov b6=r18		// I0  restore b6
+(pUStk) ld4 r17=[r17]			// M0|1 r17 = cpu_data->phys_stacked_size_p8
+	mov r19=ar.bsp			// M2   get new backing store pointer
+	mov f10=f0			// F    clear f10
+
+	nop.m 0
+	movl r14=__kernel_syscall_via_epc // X
 	;;
-	mov r14=r0		// clear r14
-	shr.u r18=r19,16	// I0|1 get byte size of existing "dirty" partition
-(pKStk) br.cond.dpnt.many skip_rbs_switch
+	mov.m ar.csd=r0			// M2   clear ar.csd
+	mov.m ar.ccv=r0			// M2   clear ar.ccv
+	mov b7=r14			// I0   clear b7 (hint with __kernel_syscall_via_epc)
 
-	mov.m ar.ccv=r0		// clear ar.ccv
-(pNonSys) br.cond.dpnt.many dont_preserve_current_frame
-	br.cond.sptk.many rbs_switch
+	mov.m ar.ssd=r0			// M2   clear ar.ssd
+	mov f11=f0			// F    clear f11
+	br.cond.sptk.many rbs_switch	// B
 END(ia64_leave_syscall)
 
 #ifdef CONFIG_IA32_SUPPORT
@@ -885,7 +880,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	ldf.fill f7=[r2],PT(F11)-PT(F7)
 	ldf.fill f8=[r3],32
 	;;
-	srlz.i			// ensure interruption collection is off
+	srlz.d	// ensure that inter. collection is off (VHPT is don't care, since text is pinned)
 	mov ar.ccv=r15
 	;;
 	ldf.fill f11=[r2]
@@ -945,11 +940,10 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	 * NOTE: alloc, loadrs, and cover can't be predicated.
 	 */
 (pNonSys) br.cond.dpnt dont_preserve_current_frame
-
-rbs_switch:
 	cover				// add current frame into dirty partition and set cr.ifs
 	;;
 	mov r19=ar.bsp			// get new backing store pointer
+rbs_switch:
 	sub r16=r16,r18			// krbs = old bsp - size of dirty partition
 	cmp.ne p9,p0=r0,r0		// clear p9 to skip restore of cr.ifs
 	;;
@@ -1024,14 +1018,14 @@ rse_clear_invalid:
 	mov loc5=0
 	mov loc6=0
 	mov loc7=0
-(pRecurse) br.call.sptk.few b0=rse_clear_invalid
+(pRecurse) br.call.dptk.few b0=rse_clear_invalid
 	;;
 	mov loc8=0
 	mov loc9=0
 	cmp.ne pReturn,p0=r0,in1	// if recursion count != 0, we need to do a br.ret
 	mov loc10=0
 	mov loc11=0
-(pReturn) br.ret.sptk.many b0
+(pReturn) br.ret.dptk.many b0
 #endif /* !CONFIG_ITANIUM */
 #	undef pRecurse
 #	undef pReturn
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 962b6c4e32b..7d7684a369d 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -531,93 +531,114 @@ GLOBAL_ENTRY(fsys_bubble_down)
 	.altrp b6
 	.body
 	/*
-	 * We get here for syscalls that don't have a lightweight handler.  For those, we
-	 * need to bubble down into the kernel and that requires setting up a minimal
-	 * pt_regs structure, and initializing the CPU state more or less as if an
-	 * interruption had occurred.  To make syscall-restarts work, we setup pt_regs
-	 * such that cr_iip points to the second instruction in syscall_via_break.
-	 * Decrementing the IP hence will restart the syscall via break and not
-	 * decrementing IP will return us to the caller, as usual.  Note that we preserve
-	 * the value of psr.pp rather than initializing it from dcr.pp.  This makes it
-	 * possible to distinguish fsyscall execution from other privileged execution.
+	 * We get here for syscalls that don't have a lightweight
+	 * handler.  For those, we need to bubble down into the kernel
+	 * and that requires setting up a minimal pt_regs structure,
+	 * and initializing the CPU state more or less as if an
+	 * interruption had occurred.  To make syscall-restarts work,
+	 * we setup pt_regs such that cr_iip points to the second
+	 * instruction in syscall_via_break.  Decrementing the IP
+	 * hence will restart the syscall via break and not
+	 * decrementing IP will return us to the caller, as usual.
+	 * Note that we preserve the value of psr.pp rather than
+	 * initializing it from dcr.pp.  This makes it possible to
+	 * distinguish fsyscall execution from other privileged
+	 * execution.
 	 *
 	 * On entry:
-	 *	- normal fsyscall handler register usage, except that we also have:
+	 *	- normal fsyscall handler register usage, except
+	 *	  that we also have:
 	 *	- r18: address of syscall entry point
 	 *	- r21: ar.fpsr
 	 *	- r26: ar.pfs
 	 *	- r27: ar.rsc
 	 *	- r29: psr
+	 *
+	 * We used to clear some PSR bits here but that requires slow
+	 * serialization.  Fortuntely, that isn't really necessary.
+	 * The rationale is as follows: we used to clear bits
+	 * ~PSR_PRESERVED_BITS in PSR.L.  Since
+	 * PSR_PRESERVED_BITS==PSR.{UP,MFL,MFH,PK,DT,PP,SP,RT,IC}, we
+	 * ended up clearing PSR.{BE,AC,I,DFL,DFH,DI,DB,SI,TB}.
+	 * However,
+	 *
+	 * PSR.BE : already is turned off in __kernel_syscall_via_epc()
+	 * PSR.AC : don't care (kernel normally turns PSR.AC on)
+	 * PSR.I  : already turned off by the time fsys_bubble_down gets
+	 *	    invoked
+	 * PSR.DFL: always 0 (kernel never turns it on)
+	 * PSR.DFH: don't care --- kernel never touches f32-f127 on its own
+	 *	    initiative
+	 * PSR.DI : always 0 (kernel never turns it on)
+	 * PSR.SI : always 0 (kernel never turns it on)
+	 * PSR.DB : don't care --- kernel never enables kernel-level
+	 *	    breakpoints
+	 * PSR.TB : must be 0 already; if it wasn't zero on entry to
+	 *          __kernel_syscall_via_epc, the branch to fsys_bubble_down
+	 *          will trigger a taken branch; the taken-trap-handler then
+	 *          converts the syscall into a break-based system-call.
 	 */
-#	define PSR_PRESERVED_BITS	(IA64_PSR_UP | IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_PK \
-					 | IA64_PSR_DT | IA64_PSR_PP | IA64_PSR_SP | IA64_PSR_RT \
-					 | IA64_PSR_IC)
 	/*
-	 * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc.  The rest we have
-	 * to synthesize.
+	 * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc.
+	 * The rest we have to synthesize.
 	 */
-#	define PSR_ONE_BITS		((3 << IA64_PSR_CPL0_BIT) | (0x1 << IA64_PSR_RI_BIT) \
+#	define PSR_ONE_BITS		((3 << IA64_PSR_CPL0_BIT)	\
+					 | (0x1 << IA64_PSR_RI_BIT)	\
 					 | IA64_PSR_BN | IA64_PSR_I)
 
-	invala
-	movl r8=PSR_ONE_BITS
+	invala					// M0|1
+	movl r14=ia64_ret_from_syscall		// X
 
-	mov r25=ar.unat			// save ar.unat (5 cyc)
-	movl r9=PSR_PRESERVED_BITS
+	nop.m 0
+	movl r28=__kernel_syscall_via_break	// X	create cr.iip
+	;;
 
-	mov ar.rsc=0			// set enforced lazy mode, pl 0, little-endian, loadrs=0
-	movl r28=__kernel_syscall_via_break
+	mov r2=r16				// A    get task addr to addl-addressable register
+	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 // A
+	mov r31=pr				// I0   save pr (2 cyc)
 	;;
-	mov r23=ar.bspstore		// save ar.bspstore (12 cyc)
-	mov r31=pr			// save pr (2 cyc)
-	mov r20=r1			// save caller's gp in r20
+	st1 [r16]=r0				// M2|3 clear current->thread.on_ustack flag
+	addl r22=IA64_RBS_OFFSET,r2		// A    compute base of RBS
+	add r3=TI_FLAGS+IA64_TASK_SIZE,r2	// A
 	;;
-	mov r2=r16			// copy current task addr to addl-addressable register
-	and r9=r9,r29
-	mov r19=b6			// save b6 (2 cyc)
+	ld4 r3=[r3]				// M0|1 r3 = current_thread_info()->flags
+	lfetch.fault.excl.nt1 [r22]		// M0|1 prefetch register backing-store
+	nop.i 0
 	;;
-	mov psr.l=r9			// slam the door (17 cyc to srlz.i)
-	or r29=r8,r29			// construct cr.ipsr value to save
-	addl r22=IA64_RBS_OFFSET,r2	// compute base of RBS
+	mov ar.rsc=0				// M2   set enforced lazy mode, pl 0, LE, loadrs=0
+	nop.m 0
+	nop.i 0
 	;;
-	// GAS reports a spurious RAW hazard on the read of ar.rnat because it thinks
-	// we may be reading ar.itc after writing to psr.l.  Avoid that message with
-	// this directive:
-	dv_serialize_data
-	mov.m r24=ar.rnat		// read ar.rnat (5 cyc lat)
-	lfetch.fault.excl.nt1 [r22]
-	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r2
-
-	// ensure previous insn group is issued before we stall for srlz.i:
+	mov r23=ar.bspstore			// M2 (12 cyc) save ar.bspstore
+	mov.m r24=ar.rnat			// M2 (5 cyc) read ar.rnat (dual-issues!)
+	nop.i 0
 	;;
-	srlz.i				// ensure new psr.l has been established
-	/////////////////////////////////////////////////////////////////////////////
-	////////// from this point on, execution is not interruptible anymore
-	/////////////////////////////////////////////////////////////////////////////
-	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2	// compute base of memory stack
-	cmp.ne pKStk,pUStk=r0,r0	// set pKStk <- 0, pUStk <- 1
+	mov ar.bspstore=r22			// M2 (6 cyc) switch to kernel RBS
+	movl r8=PSR_ONE_BITS			// X
 	;;
-	st1 [r16]=r0			// clear current->thread.on_ustack flag
-	mov ar.bspstore=r22		// switch to kernel RBS
-	mov b6=r18			// copy syscall entry-point to b6 (7 cyc)
-	add r3=TI_FLAGS+IA64_TASK_SIZE,r2
+	mov r25=ar.unat				// M2 (5 cyc) save ar.unat
+	mov r19=b6				// I0   save b6 (2 cyc)
+	mov r20=r1				// A    save caller's gp in r20
 	;;
-	ld4 r3=[r3]				// r2 = current_thread_info()->flags
-	mov r18=ar.bsp			// save (kernel) ar.bsp (12 cyc)
-	mov ar.rsc=0x3			// set eager mode, pl 0, little-endian, loadrs=0
-	br.call.sptk.many b7=ia64_syscall_setup
-	;;
-	ssm psr.i
-	movl r2=ia64_ret_from_syscall
+	or r29=r8,r29				// A    construct cr.ipsr value to save
+	mov b6=r18				// I0   copy syscall entry-point to b6 (7 cyc)
+	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 // A compute base of memory stack
+
+	mov r18=ar.bsp				// M2   save (kernel) ar.bsp (12 cyc)
+	cmp.ne pKStk,pUStk=r0,r0		// A    set pKStk <- 0, pUStk <- 1
+	br.call.sptk.many b7=ia64_syscall_setup	// B
 	;;
-	mov rp=r2				// set the real return addr
-	and r3=_TIF_SYSCALL_TRACEAUDIT,r3
+	mov ar.rsc=0x3				// M2   set eager mode, pl 0, LE, loadrs=0
+	mov rp=r14				// I0   set the real return addr
+	and r3=_TIF_SYSCALL_TRACEAUDIT,r3	// A
 	;;
-	cmp.eq p8,p0=r3,r0
+	ssm psr.i				// M2   we're on kernel stacks now, reenable irqs
+	cmp.eq p8,p0=r3,r0			// A
+(p10)	br.cond.spnt.many ia64_ret_from_syscall	// B    return if bad call-frame or r15 is a NaT
 
-(p10)	br.cond.spnt.many ia64_ret_from_syscall	// p10==true means out registers are more than 8
-(p8)	br.call.sptk.many b6=b6		// ignore this return addr
-	br.cond.sptk ia64_trace_syscall
+	nop.m 0
+(p8)	br.call.sptk.many b6=b6			// B    (ignore return address)
+	br.cond.spnt ia64_trace_syscall		// B
 END(fsys_bubble_down)
 
 	.rodata
diff --git a/arch/ia64/kernel/gate.S b/arch/ia64/kernel/gate.S
index facf75acdc8..86948ce63e4 100644
--- a/arch/ia64/kernel/gate.S
+++ b/arch/ia64/kernel/gate.S
@@ -72,38 +72,40 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
 	 * bundle get executed.  The remaining code must be safe even if
 	 * they do not get executed.
 	 */
-	adds r17=-1024,r15
-	mov r10=0				// default to successful syscall execution
-	epc
+	adds r17=-1024,r15			// A
+	mov r10=0				// A    default to successful syscall execution
+	epc					// B	causes split-issue
 }
 	;;
-	rsm psr.be // note: on McKinley "rsm psr.be/srlz.d" is slightly faster than "rum psr.be"
-	LOAD_FSYSCALL_TABLE(r14)
-
-	mov r16=IA64_KR(CURRENT)		// 12 cycle read latency
-	tnat.nz p10,p9=r15
-	mov r19=NR_syscalls-1
+	rsm psr.be | psr.i			// M2 (5 cyc to srlz.d)
+	LOAD_FSYSCALL_TABLE(r14)		// X
 	;;
-	shladd r18=r17,3,r14
-
-	srlz.d
-	cmp.ne p8,p0=r0,r0			// p8 <- FALSE
-	/* Note: if r17 is a NaT, p6 will be set to zero.  */
-	cmp.geu p6,p7=r19,r17			// (syscall > 0 && syscall < 1024+NR_syscalls)?
-	;;
-(p6)	ld8 r18=[r18]
-	mov r21=ar.fpsr
-	add r14=-8,r14				// r14 <- addr of fsys_bubble_down entry
-	;;
-(p6)	mov b7=r18
-(p6)	tbit.z p8,p0=r18,0
-(p8)	br.dptk.many b7
-
-(p6)	rsm psr.i
-	mov r27=ar.rsc
-	mov r26=ar.pfs
+	mov r16=IA64_KR(CURRENT)		// M2 (12 cyc)
+	shladd r18=r17,3,r14			// A
+	mov r19=NR_syscalls-1			// A
+	;;
+	lfetch [r18]				// M0|1
+	mov r29=psr				// M2 (12 cyc)
+	// If r17 is a NaT, p6 will be zero
+	cmp.geu p6,p7=r19,r17			// A    (sysnr > 0 && sysnr < 1024+NR_syscalls)?
+	;;
+	mov r21=ar.fpsr				// M2 (12 cyc)
+	tnat.nz p10,p9=r15			// I0
+	mov.i r26=ar.pfs			// I0 (would stall anyhow due to srlz.d...)
+	;;
+	srlz.d					// M0 (forces split-issue) ensure PSR.BE==0
+(p6)	ld8 r18=[r18]				// M0|1
+	nop.i 0
+	;;
+	nop.m 0
+(p6)	tbit.z.unc p8,p0=r18,0			// I0 (dual-issues with "mov b7=r18"!)
+	nop.i 0
 	;;
-	mov r29=psr				// read psr (12 cyc load latency)
+(p8)	ssm psr.i
+(p6)	mov b7=r18				// I0
+(p8)	br.dptk.many b7				// B
+
+	mov r27=ar.rsc				// M2 (12 cyc)
 /*
  * brl.cond doesn't work as intended because the linker would convert this branch
  * into a branch to a PLT.  Perhaps there will be a way to avoid this with some
@@ -111,6 +113,8 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
  * instead.
  */
 #ifdef CONFIG_ITANIUM
+(p6)	add r14=-8,r14				// r14 <- addr of fsys_bubble_down entry
+	;;
 (p6)	ld8 r14=[r14]				// r14 <- fsys_bubble_down
 	;;
 (p6)	mov b7=r14
@@ -118,7 +122,7 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
 #else
 	BRL_COND_FSYS_BUBBLE_DOWN(p6)
 #endif
-
+	ssm psr.i
 	mov r10=-1
 (p10)	mov r8=EINVAL
 (p9)	mov r8=ENOSYS
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 7bbf019c986..01572814abe 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -58,9 +58,6 @@ EXPORT_SYMBOL(__strlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(__strnlen_user);
 
-#include <asm/unistd.h>
-EXPORT_SYMBOL(__ia64_syscall);
-
 /* from arch/ia64/lib */
 extern void __divsi3(void);
 extern void __udivsi3(void);
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 2bc085a73e3..3bb3a13c404 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -1,7 +1,7 @@
 /*
  * arch/ia64/kernel/ivt.S
  *
- * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co
+ * Copyright (C) 1998-2001, 2003, 2005 Hewlett-Packard Co
  *	Stephane Eranian <eranian@hpl.hp.com>
  *	David Mosberger <davidm@hpl.hp.com>
  * Copyright (C) 2000, 2002-2003 Intel Co
@@ -692,82 +692,118 @@ ENTRY(break_fault)
 	 * to prevent leaking bits from kernel to user level.
 	 */
 	DBG_FAULT(11)
-	mov r16=IA64_KR(CURRENT)		// r16 = current task; 12 cycle read lat.
-	mov r17=cr.iim
-	mov r18=__IA64_BREAK_SYSCALL
-	mov r21=ar.fpsr
-	mov r29=cr.ipsr
-	mov r19=b6
-	mov r25=ar.unat
-	mov r27=ar.rsc
-	mov r26=ar.pfs
-	mov r28=cr.iip
-	mov r31=pr				// prepare to save predicates
-	mov r20=r1
-	;;
+	mov.m r16=IA64_KR(CURRENT)		// M2 r16 <- current task (12 cyc)
+	mov r29=cr.ipsr				// M2 (12 cyc)
+	mov r31=pr				// I0 (2 cyc)
+
+	mov r17=cr.iim				// M2 (2 cyc)
+	mov.m r27=ar.rsc			// M2 (12 cyc)
+	mov r18=__IA64_BREAK_SYSCALL		// A
+
+	mov.m ar.rsc=0				// M2
+	mov.m r21=ar.fpsr			// M2 (12 cyc)
+	mov r19=b6				// I0 (2 cyc)
+	;;
+	mov.m r23=ar.bspstore			// M2 (12 cyc)
+	mov.m r24=ar.rnat			// M2 (5 cyc)
+	mov.i r26=ar.pfs			// I0 (2 cyc)
+
+	invala					// M0|1
+	nop.m 0					// M
+	mov r20=r1				// A			save r1
+
+	nop.m 0
+	movl r30=sys_call_table			// X
+
+	mov r28=cr.iip				// M2 (2 cyc)
+	cmp.eq p0,p7=r18,r17			// I0 is this a system call?
+(p7)	br.cond.spnt non_syscall		// B  no ->
+	//
+	// From this point on, we are definitely on the syscall-path
+	// and we can use (non-banked) scratch registers.
+	//
+///////////////////////////////////////////////////////////////////////
+	mov r1=r16				// A    move task-pointer to "addl"-addressable reg
+	mov r2=r16				// A    setup r2 for ia64_syscall_setup
+	add r9=TI_FLAGS+IA64_TASK_SIZE,r16	// A	r9 = &current_thread_info()->flags
+
 	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16
-	cmp.eq p0,p7=r18,r17			// is this a system call? (p7 <- false, if so)
-(p7)	br.cond.spnt non_syscall
+	adds r15=-1024,r15			// A    subtract 1024 from syscall number
+	mov r3=NR_syscalls - 1
 	;;
-	ld1 r17=[r16]				// load current->thread.on_ustack flag
-	st1 [r16]=r0				// clear current->thread.on_ustack flag
-	add r1=-IA64_TASK_THREAD_ON_USTACK_OFFSET,r16	// set r1 for MINSTATE_START_SAVE_MIN_VIRT
+	ld1.bias r17=[r16]			// M0|1 r17 = current->thread.on_ustack flag
+	ld4 r9=[r9]				// M0|1 r9 = current_thread_info()->flags
+	extr.u r8=r29,41,2			// I0   extract ei field from cr.ipsr
+
+	shladd r30=r15,3,r30			// A    r30 = sys_call_table + 8*(syscall-1024)
+	addl r22=IA64_RBS_OFFSET,r1		// A    compute base of RBS
+	cmp.leu p6,p7=r15,r3			// A    syscall number in range?
 	;;
-	invala
 
-	/* adjust return address so we skip over the break instruction: */
+	lfetch.fault.excl.nt1 [r22]		// M0|1 prefetch RBS
+(p6)	ld8 r30=[r30]				// M0|1 load address of syscall entry point
+	tnat.nz.or p7,p0=r15			// I0	is syscall nr a NaT?
 
-	extr.u r8=r29,41,2			// extract ei field from cr.ipsr
-	;;
-	cmp.eq p6,p7=2,r8			// isr.ei==2?
-	mov r2=r1				// setup r2 for ia64_syscall_setup
-	;;
-(p6)	mov r8=0				// clear ei to 0
-(p6)	adds r28=16,r28				// switch cr.iip to next bundle cr.ipsr.ei wrapped
-(p7)	adds r8=1,r8				// increment ei to next slot
-	;;
-	cmp.eq pKStk,pUStk=r0,r17		// are we in kernel mode already?
-	dep r29=r8,r29,41,2			// insert new ei into cr.ipsr
+	mov.m ar.bspstore=r22			// M2   switch to kernel RBS
+	cmp.eq p8,p9=2,r8			// A    isr.ei==2?
 	;;
 
-	// switch from user to kernel RBS:
-	MINSTATE_START_SAVE_MIN_VIRT
-	br.call.sptk.many b7=ia64_syscall_setup
-	;;
-	MINSTATE_END_SAVE_MIN_VIRT		// switch to bank 1
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
-	mov r3=NR_syscalls - 1
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	// p10==true means out registers are more than 8 or r15's Nat is true
-(p10)	br.cond.spnt.many ia64_ret_from_syscall
-	;;
-	movl r16=sys_call_table
+(p8)	mov r8=0				// A    clear ei to 0
+(p7)	movl r30=sys_ni_syscall			// X
 
-	adds r15=-1024,r15			// r15 contains the syscall number---subtract 1024
-	movl r2=ia64_ret_from_syscall
-	;;
-	shladd r20=r15,3,r16			// r20 = sys_call_table + 8*(syscall-1024)
-	cmp.leu p6,p7=r15,r3			// (syscall > 0 && syscall < 1024 + NR_syscalls) ?
-	mov rp=r2				// set the real return addr
+(p8)	adds r28=16,r28				// A    switch cr.iip to next bundle
+(p9)	adds r8=1,r8				// A    increment ei to next slot
+	nop.i 0
 	;;
-(p6)	ld8 r20=[r20]				// load address of syscall entry point
-(p7)	movl r20=sys_ni_syscall
 
-	add r2=TI_FLAGS+IA64_TASK_SIZE,r13
-	;;
-	ld4 r2=[r2]				// r2 = current_thread_info()->flags
-	;;
-	and r2=_TIF_SYSCALL_TRACEAUDIT,r2	// mask trace or audit
+	mov.m r25=ar.unat			// M2 (5 cyc)
+	dep r29=r8,r29,41,2			// I0   insert new ei into cr.ipsr
+	adds r15=1024,r15			// A    restore original syscall number
+	//
+	// If any of the above loads miss in L1D, we'll stall here until
+	// the data arrives.
+	//
+///////////////////////////////////////////////////////////////////////
+	st1 [r16]=r0				// M2|3 clear current->thread.on_ustack flag
+	mov b6=r30				// I0   setup syscall handler branch reg early
+	cmp.eq pKStk,pUStk=r0,r17		// A    were we on kernel stacks already?
+
+	and r9=_TIF_SYSCALL_TRACEAUDIT,r9	// A    mask trace or audit
+	mov r18=ar.bsp				// M2 (12 cyc)
+(pKStk)	br.cond.spnt .break_fixup		// B	we're already in kernel-mode -- fix up RBS
+	;;
+.back_from_break_fixup:
+(pUStk)	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1 // A    compute base of memory stack
+	cmp.eq p14,p0=r9,r0			// A    are syscalls being traced/audited?
+	br.call.sptk.many b7=ia64_syscall_setup	// B
+1:
+	mov ar.rsc=0x3				// M2   set eager mode, pl 0, LE, loadrs=0
+	nop 0
+	bsw.1					// B (6 cyc) regs are saved, switch to bank 1
 	;;
-	cmp.eq p8,p0=r2,r0
-	mov b6=r20
+
+	ssm psr.ic | PSR_DEFAULT_BITS		// M2	now it's safe to re-enable intr.-collection
+	movl r3=ia64_ret_from_syscall		// X
 	;;
-(p8)	br.call.sptk.many b6=b6			// ignore this return addr
-	br.cond.sptk ia64_trace_syscall
+
+	srlz.i					// M0   ensure interruption collection is on
+	mov rp=r3				// I0   set the real return addr
+(p10)	br.cond.spnt.many ia64_ret_from_syscall	// B    return if bad call-frame or r15 is a NaT
+
+(p15)	ssm psr.i				// M2   restore psr.i
+(p14)	br.call.sptk.many b6=b6			// B    invoke syscall-handker (ignore return addr)
+	br.cond.spnt.many ia64_trace_syscall	// B	do syscall-tracing thingamagic
 	// NOT REACHED
+///////////////////////////////////////////////////////////////////////
+	// On entry, we optimistically assumed that we're coming from user-space.
+	// For the rare cases where a system-call is done from within the kernel,
+	// we fix things up at this point:
+.break_fixup:
+	add r1=-IA64_PT_REGS_SIZE,sp		// A    allocate space for pt_regs structure
+	mov ar.rnat=r24				// M2	restore kernel's AR.RNAT
+	;;
+	mov ar.bspstore=r23			// M2	restore kernel's AR.BSPSTORE
+	br.cond.sptk .back_from_break_fixup
 END(break_fault)
 
 	.org ia64_ivt+0x3000
@@ -842,8 +878,6 @@ END(interrupt)
 	 *	- r31: saved pr
 	 *	-  b0: original contents (to be saved)
 	 * On exit:
-	 *	- executing on bank 1 registers
-	 *	- psr.ic enabled, interrupts restored
 	 *	-  p10: TRUE if syscall is invoked with more than 8 out
 	 *		registers or r15's Nat is true
 	 *	-  r1: kernel's gp
@@ -851,8 +885,11 @@ END(interrupt)
 	 *	-  r8: -EINVAL if p10 is true
 	 *	- r12: points to kernel stack
 	 *	- r13: points to current task
+	 *	- r14: preserved (same as on entry)
+	 *	- p13: preserved
 	 *	- p15: TRUE if interrupts need to be re-enabled
 	 *	- ar.fpsr: set to kernel settings
+	 *	-  b6: preserved (same as on entry)
 	 */
 GLOBAL_ENTRY(ia64_syscall_setup)
 #if PT(B6) != 0
@@ -920,10 +957,10 @@ GLOBAL_ENTRY(ia64_syscall_setup)
 (p13)	mov in5=-1
 	;;
 	st8 [r16]=r21,PT(R8)-PT(AR_FPSR)	// save ar.fpsr
-	tnat.nz p14,p0=in6
+	tnat.nz p13,p0=in6
 	cmp.lt p10,p9=r11,r8	// frame size can't be more than local+8
 	;;
-	stf8 [r16]=f1		// ensure pt_regs.r8 != 0 (see handle_syscall_error)
+	mov r8=1
 (p9)	tnat.nz p10,p0=r15
 	adds r12=-16,r1		// switch to kernel memory stack (with 16 bytes of scratch)
 
@@ -934,9 +971,9 @@ GLOBAL_ENTRY(ia64_syscall_setup)
 	mov r13=r2				// establish `current'
 	movl r1=__gp				// establish kernel global pointer
 	;;
-(p14)	mov in6=-1
+	st8 [r16]=r8		// ensure pt_regs.r8 != 0 (see handle_syscall_error)
+(p13)	mov in6=-1
 (p8)	mov in7=-1
-	nop.i 0
 
 	cmp.eq pSys,pNonSys=r0,r0		// set pSys=1, pNonSys=0
 	movl r17=FPSR_DEFAULT
@@ -1007,6 +1044,8 @@ END(dispatch_illegal_op_fault)
 	FAULT(17)
 
 ENTRY(non_syscall)
+	mov ar.rsc=r27			// restore ar.rsc before SAVE_MIN_WITH_COVER
+	;;
 	SAVE_MIN_WITH_COVER
 
 	// There is no particular reason for this code to be here, other than that
@@ -1204,6 +1243,25 @@ END(disabled_fp_reg)
 // 0x5600 Entry 26 (size 16 bundles) Nat Consumption (11,23,37,50)
 ENTRY(nat_consumption)
 	DBG_FAULT(26)
+
+	mov r16=cr.ipsr
+	mov r17=cr.isr
+	mov r31=pr				// save PR
+	;;
+	and r18=0xf,r17				// r18 = cr.ipsr.code{3:0}
+	tbit.z p6,p0=r17,IA64_ISR_NA_BIT
+	;;
+	cmp.ne.or p6,p0=IA64_ISR_CODE_LFETCH,r18
+	dep r16=-1,r16,IA64_PSR_ED_BIT,1
+(p6)	br.cond.spnt 1f		// branch if (cr.ispr.na == 0 || cr.ipsr.code{3:0} != LFETCH)
+	;;
+	mov cr.ipsr=r16		// set cr.ipsr.na
+	mov pr=r31,-1
+	;;
+	rfi
+
+1:	mov pr=r31,-1
+	;;
 	FAULT(26)
 END(nat_consumption)
 
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 6d57aebad48..bbb8bc7c055 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -725,12 +725,32 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs  *pt,
 			break;
 	}
 
+	/*
+	 * Note: at the time of this call, the target task is blocked
+	 * in notify_resume_user() and by clearling PRED_LEAVE_SYSCALL
+	 * (aka, "pLvSys") we redirect execution from
+	 * .work_pending_syscall_end to .work_processed_kernel.
+	 */
 	unw_get_pr(&prev_info, &pr);
-	pr &= ~(1UL << PRED_SYSCALL);
+	pr &= ~((1UL << PRED_SYSCALL) | (1UL << PRED_LEAVE_SYSCALL));
 	pr |=  (1UL << PRED_NON_SYSCALL);
 	unw_set_pr(&prev_info, pr);
 
 	pt->cr_ifs = (1UL << 63) | cfm;
+	/*
+	 * Clear the memory that is NOT written on syscall-entry to
+	 * ensure we do not leak kernel-state to user when execution
+	 * resumes.
+	 */
+	pt->r2 = 0;
+	pt->r3 = 0;
+	pt->r14 = 0;
+	memset(&pt->r16, 0, 16*8);	/* clear r16-r31 */
+	memset(&pt->f6, 0, 6*16);	/* clear f6-f11 */
+	pt->b7 = 0;
+	pt->ar_ccv = 0;
+	pt->ar_csd = 0;
+	pt->ar_ssd = 0;
 }
 
 static int
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index d14692e0920..2693e1522d7 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -72,6 +72,8 @@ DEFINE_PER_CPU(unsigned long, ia64_phys_stacked_size_p8);
 unsigned long ia64_cycles_per_usec;
 struct ia64_boot_param *ia64_boot_param;
 struct screen_info screen_info;
+unsigned long vga_console_iobase;
+unsigned long vga_console_membase;
 
 unsigned long ia64_max_cacheline_size;
 unsigned long ia64_iobase;	/* virtual address for I/O accesses */
@@ -273,23 +275,25 @@ io_port_init (void)
 static inline int __init
 early_console_setup (char *cmdline)
 {
+	int earlycons = 0;
+
 #ifdef CONFIG_SERIAL_SGI_L1_CONSOLE
 	{
 		extern int sn_serial_console_early_setup(void);
 		if (!sn_serial_console_early_setup())
-			return 0;
+			earlycons++;
 	}
 #endif
 #ifdef CONFIG_EFI_PCDP
 	if (!efi_setup_pcdp_console(cmdline))
-		return 0;
+		earlycons++;
 #endif
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	if (!early_serial_console_init(cmdline))
-		return 0;
+		earlycons++;
 #endif
 
-	return -1;
+	return (earlycons) ? 0 : -1;
 }
 
 static inline void
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index b49d4ddaab9..0166a984709 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -231,13 +231,16 @@ smp_flush_tlb_all (void)
 void
 smp_flush_tlb_mm (struct mm_struct *mm)
 {
+	preempt_disable();
 	/* this happens for the common case of a single-threaded fork():  */
 	if (likely(mm == current->active_mm && atomic_read(&mm->mm_users) == 1))
 	{
 		local_finish_flush_tlb_mm(mm);
+		preempt_enable();
 		return;
 	}
 
+	preempt_enable();
 	/*
 	 * We could optimize this further by using mm->cpu_vm_mask to track which CPUs
 	 * have been running in the address space.  It's not clear that this is worth the
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 9e07f5463f2..783eb432384 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -384,7 +384,7 @@ static int __init sn_pci_init(void)
 	extern void register_sn_procfs(void);
 #endif
 
-	if (!ia64_platform_is("sn2") || IS_RUNNING_ON_SIMULATOR())
+	if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
 		return 0;
 
 	/*
diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c
index fec6d8b8237..7ce3cdad627 100644
--- a/arch/ia64/sn/kernel/iomv.c
+++ b/arch/ia64/sn/kernel/iomv.c
@@ -9,12 +9,16 @@
 #include <linux/module.h>
 #include <asm/io.h>
 #include <asm/delay.h>
+#include <asm/vga.h>
 #include <asm/sn/nodepda.h>
 #include <asm/sn/simulator.h>
 #include <asm/sn/pda.h>
 #include <asm/sn/sn_cpuid.h>
 #include <asm/sn/shub_mmr.h>
 
+#define IS_LEGACY_VGA_IOPORT(p) \
+	(((p) >= 0x3b0 && (p) <= 0x3bb) || ((p) >= 0x3c0 && (p) <= 0x3df))
+
 /**
  * sn_io_addr - convert an in/out port to an i/o address
  * @port: port to convert
@@ -26,6 +30,8 @@
 void *sn_io_addr(unsigned long port)
 {
 	if (!IS_RUNNING_ON_SIMULATOR()) {
+		if (IS_LEGACY_VGA_IOPORT(port))
+			port += vga_console_iobase;
 		/* On sn2, legacy I/O ports don't point at anything */
 		if (port < (64 * 1024))
 			return NULL;
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 44bfc7f318c..22e10d282c7 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/machvec.h>
 #include <asm/system.h>
 #include <asm/processor.h>
+#include <asm/vga.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/pda.h>
@@ -95,6 +96,7 @@ u8 sn_coherency_id;
 EXPORT_SYMBOL(sn_coherency_id);
 u8 sn_region_size;
 EXPORT_SYMBOL(sn_region_size);
+int sn_prom_type;	/* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
 
 short physical_node_map[MAX_PHYSNODE_ID];
 
@@ -273,14 +275,17 @@ void __init sn_setup(char **cmdline_p)
 
 	ia64_sn_plat_set_error_handling_features();
 
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 	/*
-	 * If the generic code has enabled vga console support - lets
-	 * get rid of it again. This is a kludge for the fact that ACPI
-	 * currtently has no way of informing us if legacy VGA is available
-	 * or not.
+	 * If there was a primary vga adapter identified through the
+	 * EFI PCDP table, make it the preferred console.  Otherwise
+	 * zero out conswitchp.
 	 */
-#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
-	if (conswitchp == &vga_con) {
+
+	if (vga_console_membase) {
+		/* usable vga ... make tty0 the preferred default console */
+		add_preferred_console("tty", 0, NULL);
+	} else {
 		printk(KERN_DEBUG "SGI: Disabling VGA console\n");
 #ifdef CONFIG_DUMMY_CONSOLE
 		conswitchp = &dummy_con;
@@ -350,7 +355,7 @@ void __init sn_setup(char **cmdline_p)
 
 	ia64_mark_idle = &snidle;
 
-	/* 
+	/*
 	 * For the bootcpu, we do this here. All other cpus will make the
 	 * call as part of cpu_init in slave cpu initialization.
 	 */
@@ -397,7 +402,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 		nodepdaindr[cnode] =
 		    alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
 		memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
-		memset(nodepdaindr[cnode]->phys_cpuid, -1, 
+		memset(nodepdaindr[cnode]->phys_cpuid, -1,
 		    sizeof(nodepdaindr[cnode]->phys_cpuid));
 	}
 
@@ -427,7 +432,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 	}
 
 	/*
-	 * Initialize the per node hubdev.  This includes IO Nodes and 
+	 * Initialize the per node hubdev.  This includes IO Nodes and
 	 * headless/memless nodes.
 	 */
 	for (cnode = 0; cnode < numionodes; cnode++) {
@@ -455,6 +460,14 @@ void __init sn_cpu_init(void)
 	int i;
 	static int wars_have_been_checked;
 
+	if (smp_processor_id() == 0 && IS_MEDUSA()) {
+		if (ia64_sn_is_fake_prom())
+			sn_prom_type = 2;
+		else
+			sn_prom_type = 1;
+		printk("Running on medusa with %s PROM\n", (sn_prom_type == 1) ? "real" : "fake");
+	}
+
 	memset(pda, 0, sizeof(pda));
 	if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift,
 				&sn_system_size, &sn_sharing_domain_size, &sn_partition_id,
@@ -520,7 +533,7 @@ void __init sn_cpu_init(void)
 	 */
 	{
 		u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0};
-		u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1, 
+		u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1,
 			SH2_PIO_WRITE_STATUS_2, SH2_PIO_WRITE_STATUS_3};
 		u64 *pio;
 		pio = is_shub1() ? pio1 : pio2;
@@ -552,6 +565,10 @@ static void __init scan_for_ionodes(void)
 	int nasid = 0;
 	lboard_t *brd;
 
+	/* fakeprom does not support klgraph */
+	if (IS_RUNNING_ON_FAKE_PROM())
+		return;
+
 	/* Setup ionodes with memory */
 	for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
 		char *klgraph_header;
@@ -563,8 +580,6 @@ static void __init scan_for_ionodes(void)
 		cnodeid = -1;
 		klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
 		if (!klgraph_header) {
-			if (IS_RUNNING_ON_SIMULATOR())
-				continue;
 			BUG();	/* All nodes must have klconfig tables! */
 		}
 		cnodeid = nasid_to_cnodeid(nasid);
@@ -630,8 +645,8 @@ int
 nasid_slice_to_cpuid(int nasid, int slice)
 {
 	long cpu;
-	
-	for (cpu=0; cpu < NR_CPUS; cpu++) 
+
+	for (cpu=0; cpu < NR_CPUS; cpu++)
 		if (cpuid_to_nasid(cpu) == nasid &&
 					cpuid_to_slice(cpu) == slice)
 			return cpu;
diff --git a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S
index 7947312801e..96cb71d1568 100644
--- a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S
+++ b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S
@@ -6,6 +6,7 @@
  * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
  */
 
+#include <asm/types.h>
 #include <asm/sn/shub_mmr.h>
 
 #define DEADLOCKBIT	SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT
diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c
index a087b274847..8716f4d5314 100644
--- a/arch/ia64/sn/kernel/tiocx.c
+++ b/arch/ia64/sn/kernel/tiocx.c
@@ -204,8 +204,8 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num,
 	cx_dev->dev.parent = NULL;
 	cx_dev->dev.bus = &tiocx_bus_type;
 	cx_dev->dev.release = tiocx_bus_release;
-	snprintf(cx_dev->dev.bus_id, BUS_ID_SIZE, "%d.0x%x",
-		 cx_dev->cx_id.nasid, cx_dev->cx_id.part_num);
+	snprintf(cx_dev->dev.bus_id, BUS_ID_SIZE, "%d",
+		 cx_dev->cx_id.nasid);
 	device_register(&cx_dev->dev);
 	get_device(&cx_dev->dev);
 
@@ -236,7 +236,6 @@ int cx_device_unregister(struct cx_dev *cx_dev)
  */
 static int cx_device_reload(struct cx_dev *cx_dev)
 {
-	device_remove_file(&cx_dev->dev, &dev_attr_cxdev_control);
 	cx_device_unregister(cx_dev);
 	return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num,
 				  cx_dev->cx_id.mfg_num, cx_dev->hubdev);
@@ -383,6 +382,7 @@ static int is_fpga_brick(int nasid)
 	switch (tiocx_btchar_get(nasid)) {
 	case L1_BRICKTYPE_SA:
 	case L1_BRICKTYPE_ATHENA:
+	case L1_BRICKTYPE_DAYTONA:
 		return 1;
 	}
 	return 0;
@@ -409,7 +409,7 @@ static int tiocx_reload(struct cx_dev *cx_dev)
 		uint64_t cx_id;
 
 		cx_id =
-		    *(volatile int32_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
+		    *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
 					  WIDGET_ID);
 		part_num = XWIDGET_PART_NUM(cx_id);
 		mfg_num = XWIDGET_MFG_NUM(cx_id);
@@ -458,6 +458,10 @@ static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *
 
 	switch (n) {
 	case 1:
+		tio_corelet_reset(cx_dev->cx_id.nasid, TIOCX_CORELET);
+		tiocx_reload(cx_dev);
+		break;
+	case 2:
 		tiocx_reload(cx_dev);
 		break;
 	case 3:
@@ -537,7 +541,7 @@ static void __exit tiocx_exit(void)
 	bus_unregister(&tiocx_bus_type);
 }
 
-module_init(tiocx_init);
+subsys_initcall(tiocx_init);
 module_exit(tiocx_exit);
 
 /************************************************************************
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 8dae9eb4545..05aa8c2fe9b 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -336,7 +336,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr)
 	if (!ct_addr)
 		return 0;
 
-	bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffff);
+	bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffffUL);
 	node_upper = ct_addr >> 48;
 
 	if (node_upper > 64) {
@@ -464,7 +464,7 @@ map_return:
  * For mappings created using the direct modes (64 or 48) there are no
  * resources to release.
  */
-void
+static void
 tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
 {
 	int i, entry;
@@ -514,7 +514,7 @@ tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
  * The mapping mode used is based on the devices dma_mask.  As a last resort
  * use the GART mapped mode.
  */
-uint64_t
+static uint64_t
 tioca_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
 {
 	uint64_t mapaddr;
@@ -580,7 +580,7 @@ tioca_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
  * On successful setup, returns the kernel version of tioca_common back to
  * the caller.
  */
-void *
+static void *
 tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft)
 {
 	struct tioca_common *tioca_common;
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 872085dea8a..6efaa9293ee 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -506,7 +506,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=17
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index d28ebfa1070..30fc03ed0cf 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -662,7 +662,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=17
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 1700d7aec68..46c9511f322 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -514,7 +514,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_NR_UARTS=13
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index b27980161c3..67aca6ccc9b 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -661,7 +661,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_NR_UARTS=13
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index ebd6301aa59..fdae21c503d 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -517,7 +517,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_NR_UARTS=13
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c
index 839b44a7e08..53c95c0bbf4 100644
--- a/drivers/firmware/pcdp.c
+++ b/drivers/firmware/pcdp.c
@@ -16,6 +16,7 @@
 #include <linux/console.h>
 #include <linux/efi.h>
 #include <linux/serial.h>
+#include <asm/vga.h>
 #include "pcdp.h"
 
 static int __init
@@ -40,10 +41,27 @@ setup_serial_console(struct pcdp_uart *uart)
 }
 
 static int __init
-setup_vga_console(struct pcdp_vga *vga)
+setup_vga_console(struct pcdp_device *dev)
 {
 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
-	if (efi_mem_type(0xA0000) == EFI_CONVENTIONAL_MEMORY) {
+	u8 *if_ptr;
+
+	if_ptr = ((u8 *)dev + sizeof(struct pcdp_device));
+	if (if_ptr[0] == PCDP_IF_PCI) {
+		struct pcdp_if_pci if_pci;
+
+		/* struct copy since ifptr might not be correctly aligned */
+
+		memcpy(&if_pci, if_ptr, sizeof(if_pci));
+
+		if (if_pci.trans & PCDP_PCI_TRANS_IOPORT)
+			vga_console_iobase = if_pci.ioport_tra;
+
+		if (if_pci.trans & PCDP_PCI_TRANS_MMIO)
+			vga_console_membase = if_pci.mmio_tra;
+	}
+
+	if (efi_mem_type(vga_console_membase + 0xA0000) == EFI_CONVENTIONAL_MEMORY) {
 		printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n");
 		return -ENODEV;
 	}
@@ -95,7 +113,7 @@ efi_setup_pcdp_console(char *cmdline)
 	     dev = (struct pcdp_device *) ((u8 *) dev + dev->length)) {
 		if (dev->flags & PCDP_PRIMARY_CONSOLE) {
 			if (dev->type == PCDP_CONSOLE_VGA) {
-				return setup_vga_console((struct pcdp_vga *) dev);
+				return setup_vga_console(dev);
 			}
 		}
 	}
diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
index 1dc7c88b7b4..e72cc47de33 100644
--- a/drivers/firmware/pcdp.h
+++ b/drivers/firmware/pcdp.h
@@ -52,11 +52,34 @@ struct pcdp_uart {
 	u32				clock_rate;
 	u8				pci_prog_intfc;
 	u8				flags;
-};
+} __attribute__((packed));
+
+#define PCDP_IF_PCI	1
+
+/* pcdp_if_pci.trans */
+#define PCDP_PCI_TRANS_IOPORT	0x02
+#define PCDP_PCI_TRANS_MMIO	0x01
+
+struct pcdp_if_pci {
+	u8			interconnect;
+	u8			reserved;
+	u16			length;
+	u8			segment;
+	u8			bus;
+	u8			dev;
+	u8			fun;
+	u16			dev_id;
+	u16			vendor_id;
+	u32			acpi_interrupt;
+	u64			mmio_tra;
+	u64			ioport_tra;
+	u8			flags;
+	u8			trans;
+} __attribute__((packed));
 
 struct pcdp_vga {
 	u8			count;		/* address space descriptors */
-};
+} __attribute__((packed));
 
 /* pcdp_device.flags */
 #define PCDP_PRIMARY_CONSOLE	1
@@ -66,7 +89,9 @@ struct pcdp_device {
 	u8			flags;
 	u16			length;
 	u16			efi_index;
-};
+	/* next data is pcdp_if_pci or pcdp_if_acpi (not yet supported) */
+	/* next data is device specific type (currently only pcdp_vga) */
+} __attribute__((packed));
 
 struct pcdp {
 	u8			signature[4];
@@ -81,4 +106,4 @@ struct pcdp {
 	u32			num_uarts;
 	struct pcdp_uart	uart[0];	/* actual size is num_uarts */
 	/* remainder of table is pcdp_device structures */
-};
+} __attribute__((packed));
diff --git a/drivers/i2c/chips/atxp1.c b/drivers/i2c/chips/atxp1.c
index 5c6597aa2c7..0bcf82b4c07 100644
--- a/drivers/i2c/chips/atxp1.c
+++ b/drivers/i2c/chips/atxp1.c
@@ -144,7 +144,7 @@ static ssize_t atxp1_storevcore(struct device *dev, struct device_attribute *att
 	if (vid == cvid)
 		return count;
 
-	dev_info(dev, "Setting VCore to %d mV (0x%02x)\n", vcore, vid);
+	dev_dbg(dev, "Setting VCore to %d mV (0x%02x)\n", vcore, vid);
 
 	/* Write every 25 mV step to increase stability */
 	if (cvid > vid) {
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 2e28c201dcc..942a2819576 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -68,7 +68,6 @@ struct etherh_priv {
 	void __iomem	*dma_base;
 	unsigned int	id;
 	void __iomem	*ctrl_port;
-	void __iomem	*base;
 	unsigned char	ctrl;
 	u32		supported;
 };
@@ -178,7 +177,7 @@ etherh_setif(struct net_device *dev)
 	switch (etherh_priv(dev)->id) {
 	case PROD_I3_ETHERLAN600:
 	case PROD_I3_ETHERLAN600A:
-		addr = etherh_priv(dev)->base + EN0_RCNTHI;
+		addr = (void *)dev->base_addr + EN0_RCNTHI;
 
 		switch (dev->if_port) {
 		case IF_PORT_10BASE2:
@@ -219,7 +218,7 @@ etherh_getifstat(struct net_device *dev)
 	switch (etherh_priv(dev)->id) {
 	case PROD_I3_ETHERLAN600:
 	case PROD_I3_ETHERLAN600A:
-		addr = etherh_priv(dev)->base + EN0_RCNTHI;
+		addr = (void *)dev->base_addr + EN0_RCNTHI;
 		switch (dev->if_port) {
 		case IF_PORT_10BASE2:
 			stat = 1;
@@ -282,7 +281,7 @@ static void
 etherh_reset(struct net_device *dev)
 {
 	struct ei_device *ei_local = netdev_priv(dev);
-	void __iomem *addr = etherh_priv(dev)->base;
+	void __iomem *addr = (void *)dev->base_addr;
 
 	writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr);
 
@@ -328,7 +327,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf
 
 	ei_local->dmaing = 1;
 
-	addr = etherh_priv(dev)->base;
+	addr = (void *)dev->base_addr;
 	dma_base = etherh_priv(dev)->dma_base;
 
 	count = (count + 1) & ~1;
@@ -388,7 +387,7 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int
 
 	ei_local->dmaing = 1;
 
-	addr = etherh_priv(dev)->base;
+	addr = (void *)dev->base_addr;
 	dma_base = etherh_priv(dev)->dma_base;
 
 	buf = skb->data;
@@ -428,7 +427,7 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p
 
 	ei_local->dmaing = 1;
 
-	addr = etherh_priv(dev)->base;
+	addr = (void *)dev->base_addr;
 	dma_base = etherh_priv(dev)->dma_base;
 
 	writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
@@ -697,8 +696,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
 		eh->ctrl_port = eh->ioc_fast;
 	}
 
-	eh->base = eh->memc + data->ns8390_offset;
-	dev->base_addr = (unsigned long)eh->base;
+	dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset;
 	eh->dma_base = eh->memc + data->dataport_offset;
 	eh->ctrl_port += data->ctrlport_offset;
 
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 34e75bc8f4c..9224fc3184e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -105,7 +105,7 @@ static struct old_serial_port old_serial_port[] = {
 	SERIAL_PORT_DFNS /* defined in asm/serial.h */
 };
 
-#define UART_NR	(ARRAY_SIZE(old_serial_port) + CONFIG_SERIAL_8250_NR_UARTS)
+#define UART_NR	CONFIG_SERIAL_8250_NR_UARTS
 
 #ifdef CONFIG_SERIAL_8250_RSA
 
@@ -993,21 +993,24 @@ static void autoconfig_irq(struct uart_8250_port *up)
 	up->port.irq = (irq > 0) ? irq : 0;
 }
 
+static inline void __stop_tx(struct uart_8250_port *p)
+{
+	if (p->ier & UART_IER_THRI) {
+		p->ier &= ~UART_IER_THRI;
+		serial_out(p, UART_IER, p->ier);
+	}
+}
+
 static void serial8250_stop_tx(struct uart_port *port, unsigned int tty_stop)
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
 
-	if (up->ier & UART_IER_THRI) {
-		up->ier &= ~UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-	}
+	__stop_tx(up);
 
 	/*
-	 * We only do this from uart_stop - if we run out of
-	 * characters to send, we don't want to prevent the
-	 * FIFO from emptying.
+	 * We really want to stop the transmitter from sending.
 	 */
-	if (up->port.type == PORT_16C950 && tty_stop) {
+	if (up->port.type == PORT_16C950) {
 		up->acr |= UART_ACR_TXDIS;
 		serial_icr_write(up, UART_ACR, up->acr);
 	}
@@ -1031,10 +1034,11 @@ static void serial8250_start_tx(struct uart_port *port, unsigned int tty_start)
 				transmit_chars(up);
 		}
 	}
+
 	/*
-	 * We only do this from uart_start
+	 * Re-enable the transmitter if we disabled it.
 	 */
-	if (tty_start && up->port.type == PORT_16C950) {
+	if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
 		up->acr &= ~UART_ACR_TXDIS;
 		serial_icr_write(up, UART_ACR, up->acr);
 	}
@@ -1155,7 +1159,7 @@ static _INLINE_ void transmit_chars(struct uart_8250_port *up)
 		return;
 	}
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
-		serial8250_stop_tx(&up->port, 0);
+		__stop_tx(up);
 		return;
 	}
 
@@ -1174,7 +1178,7 @@ static _INLINE_ void transmit_chars(struct uart_8250_port *up)
 	DEBUG_INTR("THRE...");
 
 	if (uart_circ_empty(xmit))
-		serial8250_stop_tx(&up->port, 0);
+		__stop_tx(up);
 }
 
 static _INLINE_ void check_modem_status(struct uart_8250_port *up)
@@ -1376,13 +1380,10 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
 static unsigned int serial8250_get_mctrl(struct uart_port *port)
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
-	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
-	spin_lock_irqsave(&up->port.lock, flags);
 	status = serial_in(up, UART_MSR);
-	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	ret = 0;
 	if (status & UART_MSR_DCD)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e879bce160d..e0d0a470ddf 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -86,7 +86,7 @@ config SERIAL_8250_ACPI
 	  namespace, say Y here.  If unsure, say N.
 
 config SERIAL_8250_NR_UARTS
-	int "Maximum number of non-legacy 8250/16550 serial ports"
+	int "Maximum number of 8250/16550 serial ports"
 	depends on SERIAL_8250
 	default "4"
 	help
diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c
index 5400dc2c087..6104aeef124 100644
--- a/drivers/serial/au1x00_uart.c
+++ b/drivers/serial/au1x00_uart.c
@@ -556,13 +556,10 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
 static unsigned int serial8250_get_mctrl(struct uart_port *port)
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
-	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
-	spin_lock_irqsave(&up->port.lock, flags);
 	status = serial_in(up, UART_MSR);
-	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	ret = 0;
 	if (status & UART_MSR_DCD)
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 3ea46c069f6..ea5bf4d4daa 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -518,27 +518,28 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id, struct pt_regs *re
 static __inline__ unsigned char ip22zilog_read_channel_status(struct uart_port *port)
 {
 	struct zilog_channel *channel;
-	unsigned long flags;
 	unsigned char status;
 
-	spin_lock_irqsave(&port->lock, flags);
-
 	channel = ZILOG_CHANNEL_FROM_PORT(port);
 	status = readb(&channel->control);
 	ZSDELAY();
 
-	spin_unlock_irqrestore(&port->lock, flags);
-
 	return status;
 }
 
 /* The port lock is not held.  */
 static unsigned int ip22zilog_tx_empty(struct uart_port *port)
 {
+	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
+	spin_lock_irqsave(&port->lock, flags);
+
 	status = ip22zilog_read_channel_status(port);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
 	if (status & Tx_BUF_EMP)
 		ret = TIOCSER_TEMT;
 	else
@@ -547,7 +548,7 @@ static unsigned int ip22zilog_tx_empty(struct uart_port *port)
 	return ret;
 }
 
-/* The port lock is not held.  */
+/* The port lock is held and interrupts are disabled.  */
 static unsigned int ip22zilog_get_mctrl(struct uart_port *port)
 {
 	unsigned char status;
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index a2a64331800..e43276c6a95 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -1058,12 +1058,9 @@ mpsc_get_mctrl(struct uart_port *port)
 {
 	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
 	u32 mflags, status;
-	ulong iflags;
 
-	spin_lock_irqsave(&pi->port.lock, iflags);
 	status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m :
 		readl(pi->mpsc_base + MPSC_CHR_10);
-	spin_unlock_irqrestore(&pi->port.lock, iflags);
 
 	mflags = 0;
 	if (status & 0x1)
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 85abd8a045e..1c9f7161712 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -604,7 +604,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
 /* 
  * Get Modem Control bits (only the input ones, the core will
  * or that with a cached value of the control ones)
- * The port lock is not held.
+ * The port lock is held and interrupts are disabled.
  */
 static unsigned int pmz_get_mctrl(struct uart_port *port)
 {
@@ -615,7 +615,7 @@ static unsigned int pmz_get_mctrl(struct uart_port *port)
 	if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
 		return 0;
 
-	status = pmz_peek_status(to_pmz(port));
+	status = read_zsreg(uap, R0);
 
 	ret = 0;
 	if (status & DCD)
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 08b08d6ae90..461c81c9320 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -274,14 +274,11 @@ static unsigned int serial_pxa_tx_empty(struct uart_port *port)
 static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
 {
 	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-	spin_lock_irqsave(&up->port.lock, flags);
 	status = serial_in(up, UART_MSR);
-	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	ret = 0;
 	if (status & UART_MSR_DCD)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 36b1ae083fb..139863a787f 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -182,6 +182,13 @@ static int uart_startup(struct uart_state *state, int init_hw)
 				uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
 		}
 
+		if (info->flags & UIF_CTS_FLOW) {
+			spin_lock_irq(&port->lock);
+			if (!(port->ops->get_mctrl(port) & TIOCM_CTS))
+				info->tty->hw_stopped = 1;
+			spin_unlock_irq(&port->lock);
+		}
+
 		info->flags |= UIF_INITIALIZED;
 
 		clear_bit(TTY_IO_ERROR, &info->tty->flags);
@@ -828,7 +835,10 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
 	if ((!file || !tty_hung_up_p(file)) &&
 	    !(tty->flags & (1 << TTY_IO_ERROR))) {
 		result = port->mctrl;
+
+		spin_lock_irq(&port->lock);
 		result |= port->ops->get_mctrl(port);
+		spin_unlock_irq(&port->lock);
 	}
 	up(&state->sem);
 
@@ -1131,6 +1141,16 @@ static void uart_set_termios(struct tty_struct *tty, struct termios *old_termios
 		spin_unlock_irqrestore(&state->port->lock, flags);
 	}
 
+	/* Handle turning on CRTSCTS */
+	if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
+		spin_lock_irqsave(&state->port->lock, flags);
+		if (!(state->port->ops->get_mctrl(state->port) & TIOCM_CTS)) {
+			tty->hw_stopped = 1;
+			state->port->ops->stop_tx(state->port, 0);
+		}
+		spin_unlock_irqrestore(&state->port->lock, flags);
+	}
+
 #if 0
 	/*
 	 * No need to wake up processes in open wait, since they
@@ -1369,6 +1389,7 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 	DECLARE_WAITQUEUE(wait, current);
 	struct uart_info *info = state->info;
 	struct uart_port *port = state->port;
+	unsigned int mctrl;
 
 	info->blocked_open++;
 	state->count--;
@@ -1416,7 +1437,10 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 		 * and wait for the carrier to indicate that the
 		 * modem is ready for us.
 		 */
-		if (port->ops->get_mctrl(port) & TIOCM_CAR)
+		spin_lock_irq(&port->lock);
+		mctrl = port->ops->get_mctrl(port);
+		spin_unlock_irq(&port->lock);
+		if (mctrl & TIOCM_CAR)
 			break;
 
 		up(&state->sem);
@@ -1618,7 +1642,9 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
 
 	if(capable(CAP_SYS_ADMIN))
 	{
+		spin_lock_irq(&port->lock);
 		status = port->ops->get_mctrl(port);
+		spin_unlock_irq(&port->lock);
 
 		ret += sprintf(buf + ret, " tx:%d rx:%d",
 				port->icount.tx, port->icount.rx);
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 3f1051a4a13..d085030df70 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -442,13 +442,10 @@ static unsigned int serial_txx9_tx_empty(struct uart_port *port)
 static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
 {
 	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
-	unsigned long flags;
 	unsigned int ret;
 
-	spin_lock_irqsave(&up->port.lock, flags);
 	ret =  ((sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS)
 		| ((sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS);
-	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	return ret;
 }
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 10e2990a40d..8d198880756 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -426,18 +426,15 @@ static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
 		sunsab_tx_idle(up);
 }
 
-/* port->lock is not held.  */
+/* port->lock is held by caller and interrupts are disabled.  */
 static unsigned int sunsab_get_mctrl(struct uart_port *port)
 {
 	struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
-	unsigned long flags;
 	unsigned char val;
 	unsigned int result;
 
 	result = 0;
 
-	spin_lock_irqsave(&up->port.lock, flags);
-
 	val = readb(&up->regs->r.pvr);
 	result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR;
 
@@ -447,8 +444,6 @@ static unsigned int sunsab_get_mctrl(struct uart_port *port)
 	val = readb(&up->regs->r.star);
 	result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0;
 
-	spin_unlock_irqrestore(&up->port.lock, flags);
-
 	return result;
 }
 
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index ddc97c905e1..d57a3553aea 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -572,13 +572,10 @@ static unsigned int sunsu_tx_empty(struct uart_port *port)
 static unsigned int sunsu_get_mctrl(struct uart_port *port)
 {
 	struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
-	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
-	spin_lock_irqsave(&up->port.lock, flags);
 	status = serial_in(up, UART_MSR);
-	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	ret = 0;
 	if (status & UART_MSR_DCD)
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 8e65206d3d7..bff42a7b89d 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -610,27 +610,28 @@ static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *reg
 static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port)
 {
 	struct zilog_channel __iomem *channel;
-	unsigned long flags;
 	unsigned char status;
 
-	spin_lock_irqsave(&port->lock, flags);
-
 	channel = ZILOG_CHANNEL_FROM_PORT(port);
 	status = sbus_readb(&channel->control);
 	ZSDELAY();
 
-	spin_unlock_irqrestore(&port->lock, flags);
-
 	return status;
 }
 
 /* The port lock is not held.  */
 static unsigned int sunzilog_tx_empty(struct uart_port *port)
 {
+	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
+	spin_lock_irqsave(&port->lock, flags);
+
 	status = sunzilog_read_channel_status(port);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
 	if (status & Tx_BUF_EMP)
 		ret = TIOCSER_TEMT;
 	else
@@ -639,7 +640,7 @@ static unsigned int sunzilog_tx_empty(struct uart_port *port)
 	return ret;
 }
 
-/* The port lock is not held.  */
+/* The port lock is held and interrupts are disabled.  */
 static unsigned int sunzilog_get_mctrl(struct uart_port *port)
 {
 	unsigned char status;
diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c
index 94dc42475a0..76caedf737f 100644
--- a/fs/reiserfs/ioctl.c
+++ b/fs/reiserfs/ioctl.c
@@ -36,10 +36,16 @@ int reiserfs_ioctl (struct inode * inode, struct file * filp, unsigned int cmd,
 	/* following two cases are taken from fs/ext2/ioctl.c by Remy
 	   Card (card@masi.ibp.fr) */
 	case REISERFS_IOC_GETFLAGS:
+		if (!reiserfs_attrs (inode->i_sb))
+			return -ENOTTY;
+
 		flags = REISERFS_I(inode) -> i_attrs;
 		i_attrs_to_sd_attrs( inode, ( __u16 * ) &flags );
 		return put_user(flags, (int __user *) arg);
 	case REISERFS_IOC_SETFLAGS: {
+		if (!reiserfs_attrs (inode->i_sb))
+			return -ENOTTY;
+
 		if (IS_RDONLY(inode))
 			return -EROFS;
 
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 660aefca1fd..d50a5cd860c 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1066,6 +1066,8 @@ static void handle_attrs( struct super_block *s )
 				reiserfs_warning(s, "reiserfs: cannot support attributes until flag is set in super-block" );
 				REISERFS_SB(s) -> s_mount_opt &= ~ ( 1 << REISERFS_ATTRS );
 		}
+	} else if (le32_to_cpu( rs -> s_flags ) & reiserfs_attrs_cleared) {
+		REISERFS_SB(s)->s_mount_opt |= REISERFS_ATTRS;
 	}
 }
 
diff --git a/include/asm-alpha/serial.h b/include/asm-alpha/serial.h
index 7b2d9ee95a4..7e4b2987d45 100644
--- a/include/asm-alpha/serial.h
+++ b/include/asm-alpha/serial.h
@@ -22,54 +22,9 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#endif
-	
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS
diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S
index f288e74b67c..b6ec6887917 100644
--- a/include/asm-arm/arch-pxa/debug-macro.S
+++ b/include/asm-arm/arch-pxa/debug-macro.S
@@ -11,6 +11,8 @@
  *
 */
 
+#include "hardware.h"
+
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/include/asm-arm/hardware/arm_timer.h b/include/asm-arm/hardware/arm_timer.h
new file mode 100644
index 00000000000..04be3bdf46b
--- /dev/null
+++ b/include/asm-arm/hardware/arm_timer.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
+#define __ASM_ARM_HARDWARE_ARM_TIMER_H
+
+#define TIMER_LOAD	0x00
+#define TIMER_VALUE	0x04
+#define TIMER_CTRL	0x08
+#define TIMER_CTRL_ONESHOT	(1 << 0)
+#define TIMER_CTRL_32BIT	(1 << 1)
+#define TIMER_CTRL_DIV1		(0 << 2)
+#define TIMER_CTRL_DIV16	(1 << 2)
+#define TIMER_CTRL_DIV256	(2 << 2)
+#define TIMER_CTRL_IE		(1 << 5)	/* Interrupt Enable (versatile only) */
+#define TIMER_CTRL_PERIODIC	(1 << 6)
+#define TIMER_CTRL_ENABLE	(1 << 7)
+
+#define TIMER_INTCLR	0x0c
+#define TIMER_RIS	0x10
+#define TIMER_MIS	0x14
+#define TIMER_BGLOAD	0x18
+
+#endif
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index 3d0d2860b6d..cdf49f442fd 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -290,7 +290,6 @@ do {									\
 })
 
 #ifdef CONFIG_SMP
-#error SMP not supported
 
 #define smp_mb()		mb()
 #define smp_rmb()		rmb()
@@ -304,6 +303,8 @@ do {									\
 #define smp_wmb()		barrier()
 #define smp_read_barrier_depends()		do { } while(0)
 
+#endif /* CONFIG_SMP */
+
 #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
 /*
  * On the StrongARM, "swp" is terminally broken since it bypasses the
@@ -316,9 +317,16 @@ do {									\
  *
  * We choose (1) since its the "easiest" to achieve here and is not
  * dependent on the processor type.
+ *
+ * NOTE that this solution won't work on an SMP system, so explcitly
+ * forbid it here.
  */
+#ifdef CONFIG_SMP
+#error SMP is not supported on SA1100/SA110
+#else
 #define swp_is_buggy
 #endif
+#endif
 
 static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
 {
@@ -361,8 +369,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 	return ret;
 }
 
-#endif /* CONFIG_SMP */
-
 #endif /* __ASSEMBLY__ */
 
 #define arch_align_stack(x) (x)
diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h
index 8a864b11856..9387a5e1ffe 100644
--- a/include/asm-arm/tlbflush.h
+++ b/include/asm-arm/tlbflush.h
@@ -235,7 +235,7 @@ extern struct cpu_tlb_fns cpu_tlb;
 
 #define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
 
-static inline void flush_tlb_all(void)
+static inline void local_flush_tlb_all(void)
 {
 	const int zero = 0;
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
@@ -253,7 +253,7 @@ static inline void flush_tlb_all(void)
 		asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero));
 }
 
-static inline void flush_tlb_mm(struct mm_struct *mm)
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
 {
 	const int zero = 0;
 	const int asid = ASID(mm);
@@ -282,7 +282,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
 }
 
 static inline void
-flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
 	const int zero = 0;
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
@@ -313,7 +313,7 @@ flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (uaddr));
 }
 
-static inline void flush_tlb_kernel_page(unsigned long kaddr)
+static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 {
 	const int zero = 0;
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
@@ -384,8 +384,24 @@ static inline void clean_pmd_entry(pmd_t *pmd)
 /*
  * Convert calls to our calling convention.
  */
-#define flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
-#define flush_tlb_kernel_range(s,e)	__cpu_flush_kern_tlb_range(s,e)
+#define local_flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
+#define local_flush_tlb_kernel_range(s,e)	__cpu_flush_kern_tlb_range(s,e)
+
+#ifndef CONFIG_SMP
+#define flush_tlb_all		local_flush_tlb_all
+#define flush_tlb_mm		local_flush_tlb_mm
+#define flush_tlb_page		local_flush_tlb_page
+#define flush_tlb_kernel_page	local_flush_tlb_kernel_page
+#define flush_tlb_range		local_flush_tlb_range
+#define flush_tlb_kernel_range	local_flush_tlb_kernel_range
+#else
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr);
+extern void flush_tlb_kernel_page(unsigned long kaddr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+#endif
 
 /*
  * if PG_dcache_dirty is set for the page, we need to ensure that any
diff --git a/include/asm-arm26/serial.h b/include/asm-arm26/serial.h
index 21e1df31f08..5fc747d1b50 100644
--- a/include/asm-arm26/serial.h
+++ b/include/asm-arm26/serial.h
@@ -30,34 +30,16 @@
 #if defined(CONFIG_ARCH_A5K)
      /* UART CLK        PORT  IRQ     FLAGS        */
 
-#define STD_SERIAL_PORT_DEFNS                                           \
+#define SERIAL_PORT_DFNS                                                \
         { 0, BASE_BAUD, 0x3F8, 10, STD_COM_FLAGS },     /* ttyS0 */     \
         { 0, BASE_BAUD, 0x2F8, 10, STD_COM_FLAGS },     /* ttyS1 */
 
 #else
 
-#define STD_SERIAL_PORT_DEFNS                                           \
+#define SERIAL_PORT_DFNS                                                \
         { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS0 */     \
         { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS1 */
 
 #endif
 
-#define EXTRA_SERIAL_PORT_DEFNS \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS2 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS3 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS4 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS5 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS6 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS7 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS8 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS9 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS10 */    \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS11 */    \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS12 */    \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS13 */
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS
-
 #endif
diff --git a/include/asm-i386/serial.h b/include/asm-i386/serial.h
index 21ddecc77c7..e1ecfccb743 100644
--- a/include/asm-i386/serial.h
+++ b/include/asm-i386/serial.h
@@ -22,109 +22,9 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#endif
-
-#define MCA_COM_FLAGS	(STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA)
-
-/*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
- */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS		\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
-#ifdef CONFIG_MCA
-#define MCA_SERIAL_PORT_DFNS			\
-	{ 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS },
-#else
-#define MCA_SERIAL_PORT_DFNS
-#endif
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS		\
-	HUB6_SERIAL_PORT_DFNS		\
-	MCA_SERIAL_PORT_DFNS
-
diff --git a/include/asm-ia64/mmu_context.h b/include/asm-ia64/mmu_context.h
index 0096e7e0501..e3e5fededb0 100644
--- a/include/asm-ia64/mmu_context.h
+++ b/include/asm-ia64/mmu_context.h
@@ -132,6 +132,9 @@ reload_context (mm_context_t context)
 	ia64_srlz_i();			/* srlz.i implies srlz.d */
 }
 
+/*
+ * Must be called with preemption off
+ */
 static inline void
 activate_context (struct mm_struct *mm)
 {
diff --git a/include/asm-ia64/sn/addrs.h b/include/asm-ia64/sn/addrs.h
index 1bfdfb4d7b0..103d745dc5f 100644
--- a/include/asm-ia64/sn/addrs.h
+++ b/include/asm-ia64/sn/addrs.h
@@ -216,6 +216,10 @@
 #define TIO_SWIN_WIDGETNUM(x)		(((x)  >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
 
 
+#define TIO_IOSPACE_ADDR(n,x)					\
+	/* Move in the Chiplet ID for TIO Local Block MMR */	\
+	(REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2))
+
 /*
  * The following macros produce the correct base virtual address for
  * the hub registers. The REMOTE_HUB_* macro produce
@@ -233,13 +237,16 @@
 #define REMOTE_HUB_ADDR(n,x)						\
 	((n & 1) ?							\
 	/* TIO: */							\
-	((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))			\
-	: /* SHUB: */							\
-	(((x) & BWIN_TOP) ? ((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))\
+	(is_shub2() ?							\
+	/* TIO on Shub2 */						\
+	(volatile u64 *)(TIO_IOSPACE_ADDR(n,x))				\
+	: /* TIO on shub1 */						\
+	(volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))				\
+									\
+	: /* SHUB1 and SHUB2 MMRs: */					\
+	(((x) & BWIN_TOP) ? ((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))	\
 	: ((volatile u64 *)(NODE_SWIN_BASE(n,1) + 0x800000 + (x)))))
 
-
-
 #define HUB_L(x)			(*((volatile typeof(*x) *)x))
 #define	HUB_S(x,d)			(*((volatile typeof(*x) *)x) = (d))
 
diff --git a/include/asm-ia64/sn/l1.h b/include/asm-ia64/sn/l1.h
index 08050d37b66..2e5f0aa3888 100644
--- a/include/asm-ia64/sn/l1.h
+++ b/include/asm-ia64/sn/l1.h
@@ -33,5 +33,6 @@
 #define L1_BRICKTYPE_PA		0x6a            /* j */
 #define L1_BRICKTYPE_IA		0x6b            /* k */
 #define L1_BRICKTYPE_ATHENA	0x2b            /* + */
+#define L1_BRICKTYPE_DAYTONA	0x7a            /* z */
 
 #endif /* _ASM_IA64_SN_L1_H */
diff --git a/include/asm-ia64/sn/shub_mmr.h b/include/asm-ia64/sn/shub_mmr.h
index 323fa0cd8d8..7de1d1d4b71 100644
--- a/include/asm-ia64/sn/shub_mmr.h
+++ b/include/asm-ia64/sn/shub_mmr.h
@@ -14,96 +14,98 @@
 /*                        Register "SH_IPI_INT"                         */
 /*               SHub Inter-Processor Interrupt Registers               */
 /* ==================================================================== */
-#define SH1_IPI_INT                               0x0000000110000380
-#define SH2_IPI_INT                               0x0000000010000380
+#define SH1_IPI_INT			__IA64_UL_CONST(0x0000000110000380)
+#define SH2_IPI_INT			__IA64_UL_CONST(0x0000000010000380)
 
 /*   SH_IPI_INT_TYPE                                                    */
 /*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
-#define SH_IPI_INT_TYPE_SHFT                     0
-#define SH_IPI_INT_TYPE_MASK                     0x0000000000000007
+#define SH_IPI_INT_TYPE_SHFT				0
+#define SH_IPI_INT_TYPE_MASK		__IA64_UL_CONST(0x0000000000000007)
 
 /*   SH_IPI_INT_AGT                                                     */
 /*   Description:  Agent, must be 0 for SHub                            */
-#define SH_IPI_INT_AGT_SHFT                      3
-#define SH_IPI_INT_AGT_MASK                      0x0000000000000008
+#define SH_IPI_INT_AGT_SHFT				3
+#define SH_IPI_INT_AGT_MASK		__IA64_UL_CONST(0x0000000000000008)
 
 /*   SH_IPI_INT_PID                                                     */
 /*   Description:  Processor ID, same setting as on targeted McKinley  */
-#define SH_IPI_INT_PID_SHFT                      4
-#define SH_IPI_INT_PID_MASK                      0x00000000000ffff0
+#define SH_IPI_INT_PID_SHFT                      	4
+#define SH_IPI_INT_PID_MASK		__IA64_UL_CONST(0x00000000000ffff0)
 
 /*   SH_IPI_INT_BASE                                                    */
 /*   Description:  Optional interrupt vector area, 2MB aligned          */
-#define SH_IPI_INT_BASE_SHFT                     21
-#define SH_IPI_INT_BASE_MASK                     0x0003ffffffe00000
+#define SH_IPI_INT_BASE_SHFT				21
+#define SH_IPI_INT_BASE_MASK 		__IA64_UL_CONST(0x0003ffffffe00000)
 
 /*   SH_IPI_INT_IDX                                                     */
 /*   Description:  Targeted McKinley interrupt vector                   */
-#define SH_IPI_INT_IDX_SHFT                      52
-#define SH_IPI_INT_IDX_MASK                      0x0ff0000000000000
+#define SH_IPI_INT_IDX_SHFT				52
+#define SH_IPI_INT_IDX_MASK		__IA64_UL_CONST(0x0ff0000000000000)
 
 /*   SH_IPI_INT_SEND                                                    */
 /*   Description:  Send Interrupt Message to PI, This generates a puls  */
-#define SH_IPI_INT_SEND_SHFT                     63
-#define SH_IPI_INT_SEND_MASK                     0x8000000000000000
+#define SH_IPI_INT_SEND_SHFT				63
+#define SH_IPI_INT_SEND_MASK		__IA64_UL_CONST(0x8000000000000000)
 
 /* ==================================================================== */
 /*                     Register "SH_EVENT_OCCURRED"                     */
 /*                    SHub Interrupt Event Occurred                     */
 /* ==================================================================== */
-#define SH1_EVENT_OCCURRED                        0x0000000110010000
-#define SH1_EVENT_OCCURRED_ALIAS                  0x0000000110010008
-#define SH2_EVENT_OCCURRED                        0x0000000010010000
-#define SH2_EVENT_OCCURRED_ALIAS                  0x0000000010010008
+#define SH1_EVENT_OCCURRED		__IA64_UL_CONST(0x0000000110010000)
+#define SH1_EVENT_OCCURRED_ALIAS	__IA64_UL_CONST(0x0000000110010008)
+#define SH2_EVENT_OCCURRED		__IA64_UL_CONST(0x0000000010010000)
+#define SH2_EVENT_OCCURRED_ALIAS 	__IA64_UL_CONST(0x0000000010010008)
 
 /* ==================================================================== */
 /*                     Register "SH_PI_CAM_CONTROL"                     */
 /*                      CRB CAM MMR Access Control                      */
 /* ==================================================================== */
-#define SH1_PI_CAM_CONTROL                        0x0000000120050300
+#define SH1_PI_CAM_CONTROL		__IA64_UL_CONST(0x0000000120050300)
 
 /* ==================================================================== */
 /*                        Register "SH_SHUB_ID"                         */
 /*                            SHub ID Number                            */
 /* ==================================================================== */
-#define SH1_SHUB_ID                               0x0000000110060580
-#define SH1_SHUB_ID_REVISION_SHFT                 28
-#define SH1_SHUB_ID_REVISION_MASK                 0x00000000f0000000
+#define SH1_SHUB_ID			__IA64_UL_CONST(0x0000000110060580)
+#define SH1_SHUB_ID_REVISION_SHFT			28
+#define SH1_SHUB_ID_REVISION_MASK	__IA64_UL_CONST(0x00000000f0000000)
 
 /* ==================================================================== */
 /*                          Register "SH_RTC"                           */
 /*                           Real-time Clock                            */
 /* ==================================================================== */
-#define SH1_RTC                                   0x00000001101c0000
-#define SH2_RTC					  0x00000002101c0000
-#define SH_RTC_MASK                               0x007fffffffffffff
+#define SH1_RTC				__IA64_UL_CONST(0x00000001101c0000)
+#define SH2_RTC				__IA64_UL_CONST(0x00000002101c0000)
+#define SH_RTC_MASK			__IA64_UL_CONST(0x007fffffffffffff)
 
 /* ==================================================================== */
 /*                   Register "SH_PIO_WRITE_STATUS_0|1"                 */
 /*                      PIO Write Status for CPU 0 & 1                  */
 /* ==================================================================== */
-#define SH1_PIO_WRITE_STATUS_0                    0x0000000120070200
-#define SH1_PIO_WRITE_STATUS_1                    0x0000000120070280
-#define SH2_PIO_WRITE_STATUS_0                    0x0000000020070200
-#define SH2_PIO_WRITE_STATUS_1                    0x0000000020070280
-#define SH2_PIO_WRITE_STATUS_2                    0x0000000020070300
-#define SH2_PIO_WRITE_STATUS_3                    0x0000000020070380
+#define SH1_PIO_WRITE_STATUS_0		__IA64_UL_CONST(0x0000000120070200)
+#define SH1_PIO_WRITE_STATUS_1		__IA64_UL_CONST(0x0000000120070280)
+#define SH2_PIO_WRITE_STATUS_0		__IA64_UL_CONST(0x0000000020070200)
+#define SH2_PIO_WRITE_STATUS_1		__IA64_UL_CONST(0x0000000020070280)
+#define SH2_PIO_WRITE_STATUS_2		__IA64_UL_CONST(0x0000000020070300)
+#define SH2_PIO_WRITE_STATUS_3		__IA64_UL_CONST(0x0000000020070380)
 
 /*   SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK                               */
 /*   Description:  Deadlock response detected                           */
-#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1
-#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK 0x0000000000000002
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT		1
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \
+					__IA64_UL_CONST(0x0000000000000002)
 
 /*   SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT                          */
 /*   Description:  Count of currently pending PIO writes                */
-#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56
-#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK 0x3f00000000000000
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT	56
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \
+					__IA64_UL_CONST(0x3f00000000000000)
 
 /* ==================================================================== */
 /*                Register "SH_PIO_WRITE_STATUS_0_ALIAS"                */
 /* ==================================================================== */
-#define SH1_PIO_WRITE_STATUS_0_ALIAS              0x0000000120070208
-#define SH2_PIO_WRITE_STATUS_0_ALIAS              0x0000000020070208
+#define SH1_PIO_WRITE_STATUS_0_ALIAS	__IA64_UL_CONST(0x0000000120070208)
+#define SH2_PIO_WRITE_STATUS_0_ALIAS	__IA64_UL_CONST(0x0000000020070208)
 
 /* ==================================================================== */
 /*                     Register "SH_EVENT_OCCURRED"                     */
@@ -111,33 +113,33 @@
 /* ==================================================================== */
 /*   SH_EVENT_OCCURRED_UART_INT                                         */
 /*   Description:  Pending Junk Bus UART Interrupt                      */
-#define SH_EVENT_OCCURRED_UART_INT_SHFT          20
-#define SH_EVENT_OCCURRED_UART_INT_MASK          0x0000000000100000
+#define SH_EVENT_OCCURRED_UART_INT_SHFT			20
+#define SH_EVENT_OCCURRED_UART_INT_MASK	__IA64_UL_CONST(0x0000000000100000)
 
 /*   SH_EVENT_OCCURRED_IPI_INT                                          */
 /*   Description:  Pending IPI Interrupt                                */
-#define SH_EVENT_OCCURRED_IPI_INT_SHFT           28
-#define SH_EVENT_OCCURRED_IPI_INT_MASK           0x0000000010000000
+#define SH_EVENT_OCCURRED_IPI_INT_SHFT			28
+#define SH_EVENT_OCCURRED_IPI_INT_MASK	__IA64_UL_CONST(0x0000000010000000)
 
 /*   SH_EVENT_OCCURRED_II_INT0                                          */
 /*   Description:  Pending II 0 Interrupt                               */
-#define SH_EVENT_OCCURRED_II_INT0_SHFT           29
-#define SH_EVENT_OCCURRED_II_INT0_MASK           0x0000000020000000
+#define SH_EVENT_OCCURRED_II_INT0_SHFT			29
+#define SH_EVENT_OCCURRED_II_INT0_MASK	__IA64_UL_CONST(0x0000000020000000)
 
 /*   SH_EVENT_OCCURRED_II_INT1                                          */
 /*   Description:  Pending II 1 Interrupt                               */
-#define SH_EVENT_OCCURRED_II_INT1_SHFT           30
-#define SH_EVENT_OCCURRED_II_INT1_MASK           0x0000000040000000
+#define SH_EVENT_OCCURRED_II_INT1_SHFT			30
+#define SH_EVENT_OCCURRED_II_INT1_MASK	__IA64_UL_CONST(0x0000000040000000)
 
 /*   SH2_EVENT_OCCURRED_EXTIO_INT2                                      */
 /*   Description:  Pending SHUB 2 EXT IO INT2                           */
-#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT       33
-#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK       0x0000000200000000
+#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT		33
+#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000)
 
 /*   SH2_EVENT_OCCURRED_EXTIO_INT3                                      */
 /*   Description:  Pending SHUB 2 EXT IO INT3                           */
-#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT       34
-#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK       0x0000000400000000
+#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT		34
+#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000)
 
 #define SH_ALL_INT_MASK \
 	(SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \
@@ -149,310 +151,310 @@
 /* ==================================================================== */
 /*                         LEDS                                         */
 /* ==================================================================== */
-#define SH1_REAL_JUNK_BUS_LED0			 0x7fed00000UL
-#define SH1_REAL_JUNK_BUS_LED1			 0x7fed10000UL
-#define SH1_REAL_JUNK_BUS_LED2			 0x7fed20000UL
-#define SH1_REAL_JUNK_BUS_LED3			 0x7fed30000UL
+#define SH1_REAL_JUNK_BUS_LED0			0x7fed00000UL
+#define SH1_REAL_JUNK_BUS_LED1			0x7fed10000UL
+#define SH1_REAL_JUNK_BUS_LED2			0x7fed20000UL
+#define SH1_REAL_JUNK_BUS_LED3			0x7fed30000UL
 
-#define SH2_REAL_JUNK_BUS_LED0			 0xf0000000UL
-#define SH2_REAL_JUNK_BUS_LED1			 0xf0010000UL
-#define SH2_REAL_JUNK_BUS_LED2			 0xf0020000UL
-#define SH2_REAL_JUNK_BUS_LED3			 0xf0030000UL
+#define SH2_REAL_JUNK_BUS_LED0			0xf0000000UL
+#define SH2_REAL_JUNK_BUS_LED1			0xf0010000UL
+#define SH2_REAL_JUNK_BUS_LED2			0xf0020000UL
+#define SH2_REAL_JUNK_BUS_LED3			0xf0030000UL
 
 /* ==================================================================== */
 /*                         Register "SH1_PTC_0"                         */
 /*       Puge Translation Cache Message Configuration Information       */
 /* ==================================================================== */
-#define SH1_PTC_0                                 0x00000001101a0000
+#define SH1_PTC_0			__IA64_UL_CONST(0x00000001101a0000)
 
 /*   SH1_PTC_0_A                                                        */
 /*   Description:  Type                                                 */
-#define SH1_PTC_0_A_SHFT                          0
+#define SH1_PTC_0_A_SHFT				0
 
 /*   SH1_PTC_0_PS                                                       */
 /*   Description:  Page Size                                            */
-#define SH1_PTC_0_PS_SHFT                         2
+#define SH1_PTC_0_PS_SHFT				2
 
 /*   SH1_PTC_0_RID                                                      */
 /*   Description:  Region ID                                            */
-#define SH1_PTC_0_RID_SHFT                        8
+#define SH1_PTC_0_RID_SHFT				8
 
 /*   SH1_PTC_0_START                                                    */
 /*   Description:  Start                                                */
-#define SH1_PTC_0_START_SHFT                      63
+#define SH1_PTC_0_START_SHFT				63
 
 /* ==================================================================== */
 /*                         Register "SH1_PTC_1"                         */
 /*       Puge Translation Cache Message Configuration Information       */
 /* ==================================================================== */
-#define SH1_PTC_1                                 0x00000001101a0080
+#define SH1_PTC_1			__IA64_UL_CONST(0x00000001101a0080)
 
 /*   SH1_PTC_1_START                                                    */
 /*   Description:  PTC_1 Start                                          */
-#define SH1_PTC_1_START_SHFT                      63
-
+#define SH1_PTC_1_START_SHFT				63
 
 /* ==================================================================== */
 /*                         Register "SH2_PTC"                           */
 /*       Puge Translation Cache Message Configuration Information       */
 /* ==================================================================== */
-#define SH2_PTC                                   0x0000000170000000
+#define SH2_PTC				__IA64_UL_CONST(0x0000000170000000)
 
 /*   SH2_PTC_A                                                          */
 /*   Description:  Type                                                 */
-#define SH2_PTC_A_SHFT                            0
+#define SH2_PTC_A_SHFT					0
 
 /*   SH2_PTC_PS                                                         */
 /*   Description:  Page Size                                            */
-#define SH2_PTC_PS_SHFT                           2
+#define SH2_PTC_PS_SHFT					2
 
 /*   SH2_PTC_RID                                                      */
 /*   Description:  Region ID                                            */
-#define SH2_PTC_RID_SHFT                          4
+#define SH2_PTC_RID_SHFT				4
 
 /*   SH2_PTC_START                                                      */
 /*   Description:  Start                                                */
-#define SH2_PTC_START_SHFT                        63
+#define SH2_PTC_START_SHFT				63
 
 /*   SH2_PTC_ADDR_RID                                                   */
 /*   Description:  Region ID                                            */
-#define SH2_PTC_ADDR_SHFT                         4
-#define SH2_PTC_ADDR_MASK                         0x1ffffffffffff000
+#define SH2_PTC_ADDR_SHFT				4
+#define SH2_PTC_ADDR_MASK		__IA64_UL_CONST(0x1ffffffffffff000)
 
 /* ==================================================================== */
 /*                    Register "SH_RTC1_INT_CONFIG"                     */
 /*                SHub RTC 1 Interrupt Config Registers                 */
 /* ==================================================================== */
 
-#define SH1_RTC1_INT_CONFIG                      0x0000000110001480
-#define SH2_RTC1_INT_CONFIG                      0x0000000010001480
-#define SH_RTC1_INT_CONFIG_MASK                  0x0ff3ffffffefffff
-#define SH_RTC1_INT_CONFIG_INIT                  0x0000000000000000
+#define SH1_RTC1_INT_CONFIG		__IA64_UL_CONST(0x0000000110001480)
+#define SH2_RTC1_INT_CONFIG		__IA64_UL_CONST(0x0000000010001480)
+#define SH_RTC1_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC1_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
 
 /*   SH_RTC1_INT_CONFIG_TYPE                                            */
 /*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
-#define SH_RTC1_INT_CONFIG_TYPE_SHFT             0
-#define SH_RTC1_INT_CONFIG_TYPE_MASK             0x0000000000000007
+#define SH_RTC1_INT_CONFIG_TYPE_SHFT			0
+#define SH_RTC1_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
 
 /*   SH_RTC1_INT_CONFIG_AGT                                             */
 /*   Description:  Agent, must be 0 for SHub                            */
-#define SH_RTC1_INT_CONFIG_AGT_SHFT              3
-#define SH_RTC1_INT_CONFIG_AGT_MASK              0x0000000000000008
+#define SH_RTC1_INT_CONFIG_AGT_SHFT			3
+#define SH_RTC1_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
 
 /*   SH_RTC1_INT_CONFIG_PID                                             */
 /*   Description:  Processor ID, same setting as on targeted McKinley  */
-#define SH_RTC1_INT_CONFIG_PID_SHFT              4
-#define SH_RTC1_INT_CONFIG_PID_MASK              0x00000000000ffff0
+#define SH_RTC1_INT_CONFIG_PID_SHFT			4
+#define SH_RTC1_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
 
 /*   SH_RTC1_INT_CONFIG_BASE                                            */
 /*   Description:  Optional interrupt vector area, 2MB aligned          */
-#define SH_RTC1_INT_CONFIG_BASE_SHFT             21
-#define SH_RTC1_INT_CONFIG_BASE_MASK             0x0003ffffffe00000
+#define SH_RTC1_INT_CONFIG_BASE_SHFT			21
+#define SH_RTC1_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
 
 /*   SH_RTC1_INT_CONFIG_IDX                                             */
 /*   Description:  Targeted McKinley interrupt vector                   */
-#define SH_RTC1_INT_CONFIG_IDX_SHFT              52
-#define SH_RTC1_INT_CONFIG_IDX_MASK              0x0ff0000000000000
+#define SH_RTC1_INT_CONFIG_IDX_SHFT			52
+#define SH_RTC1_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
 
 /* ==================================================================== */
 /*                    Register "SH_RTC1_INT_ENABLE"                     */
 /*                SHub RTC 1 Interrupt Enable Registers                 */
 /* ==================================================================== */
 
-#define SH1_RTC1_INT_ENABLE                      0x0000000110001500
-#define SH2_RTC1_INT_ENABLE                      0x0000000010001500
-#define SH_RTC1_INT_ENABLE_MASK                  0x0000000000000001
-#define SH_RTC1_INT_ENABLE_INIT                  0x0000000000000000
+#define SH1_RTC1_INT_ENABLE		__IA64_UL_CONST(0x0000000110001500)
+#define SH2_RTC1_INT_ENABLE		__IA64_UL_CONST(0x0000000010001500)
+#define SH_RTC1_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC1_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
 
 /*   SH_RTC1_INT_ENABLE_RTC1_ENABLE                                     */
 /*   Description:  Enable RTC 1 Interrupt                               */
-#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT      0
-#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK      0x0000000000000001
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT		0
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \
+					__IA64_UL_CONST(0x0000000000000001)
 
 /* ==================================================================== */
 /*                    Register "SH_RTC2_INT_CONFIG"                     */
 /*                SHub RTC 2 Interrupt Config Registers                 */
 /* ==================================================================== */
 
-#define SH1_RTC2_INT_CONFIG                      0x0000000110001580
-#define SH2_RTC2_INT_CONFIG                      0x0000000010001580
-#define SH_RTC2_INT_CONFIG_MASK                  0x0ff3ffffffefffff
-#define SH_RTC2_INT_CONFIG_INIT                  0x0000000000000000
+#define SH1_RTC2_INT_CONFIG		__IA64_UL_CONST(0x0000000110001580)
+#define SH2_RTC2_INT_CONFIG		__IA64_UL_CONST(0x0000000010001580)
+#define SH_RTC2_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC2_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
 
 /*   SH_RTC2_INT_CONFIG_TYPE                                            */
 /*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
-#define SH_RTC2_INT_CONFIG_TYPE_SHFT             0
-#define SH_RTC2_INT_CONFIG_TYPE_MASK             0x0000000000000007
+#define SH_RTC2_INT_CONFIG_TYPE_SHFT			0
+#define SH_RTC2_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
 
 /*   SH_RTC2_INT_CONFIG_AGT                                             */
 /*   Description:  Agent, must be 0 for SHub                            */
-#define SH_RTC2_INT_CONFIG_AGT_SHFT              3
-#define SH_RTC2_INT_CONFIG_AGT_MASK              0x0000000000000008
+#define SH_RTC2_INT_CONFIG_AGT_SHFT			3
+#define SH_RTC2_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
 
 /*   SH_RTC2_INT_CONFIG_PID                                             */
 /*   Description:  Processor ID, same setting as on targeted McKinley  */
-#define SH_RTC2_INT_CONFIG_PID_SHFT              4
-#define SH_RTC2_INT_CONFIG_PID_MASK              0x00000000000ffff0
+#define SH_RTC2_INT_CONFIG_PID_SHFT			4
+#define SH_RTC2_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
 
 /*   SH_RTC2_INT_CONFIG_BASE                                            */
 /*   Description:  Optional interrupt vector area, 2MB aligned          */
-#define SH_RTC2_INT_CONFIG_BASE_SHFT             21
-#define SH_RTC2_INT_CONFIG_BASE_MASK             0x0003ffffffe00000
+#define SH_RTC2_INT_CONFIG_BASE_SHFT			21
+#define SH_RTC2_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
 
 /*   SH_RTC2_INT_CONFIG_IDX                                             */
 /*   Description:  Targeted McKinley interrupt vector                   */
-#define SH_RTC2_INT_CONFIG_IDX_SHFT              52
-#define SH_RTC2_INT_CONFIG_IDX_MASK              0x0ff0000000000000
+#define SH_RTC2_INT_CONFIG_IDX_SHFT			52
+#define SH_RTC2_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
 
 /* ==================================================================== */
 /*                    Register "SH_RTC2_INT_ENABLE"                     */
 /*                SHub RTC 2 Interrupt Enable Registers                 */
 /* ==================================================================== */
 
-#define SH1_RTC2_INT_ENABLE                      0x0000000110001600
-#define SH2_RTC2_INT_ENABLE                      0x0000000010001600
-#define SH_RTC2_INT_ENABLE_MASK                  0x0000000000000001
-#define SH_RTC2_INT_ENABLE_INIT                  0x0000000000000000
+#define SH1_RTC2_INT_ENABLE		__IA64_UL_CONST(0x0000000110001600)
+#define SH2_RTC2_INT_ENABLE		__IA64_UL_CONST(0x0000000010001600)
+#define SH_RTC2_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC2_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
 
 /*   SH_RTC2_INT_ENABLE_RTC2_ENABLE                                     */
 /*   Description:  Enable RTC 2 Interrupt                               */
-#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT      0
-#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK      0x0000000000000001
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT		0
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \
+					__IA64_UL_CONST(0x0000000000000001)
 
 /* ==================================================================== */
 /*                    Register "SH_RTC3_INT_CONFIG"                     */
 /*                SHub RTC 3 Interrupt Config Registers                 */
 /* ==================================================================== */
 
-#define SH1_RTC3_INT_CONFIG                      0x0000000110001680
-#define SH2_RTC3_INT_CONFIG                      0x0000000010001680
-#define SH_RTC3_INT_CONFIG_MASK                  0x0ff3ffffffefffff
-#define SH_RTC3_INT_CONFIG_INIT                  0x0000000000000000
+#define SH1_RTC3_INT_CONFIG		__IA64_UL_CONST(0x0000000110001680)
+#define SH2_RTC3_INT_CONFIG		__IA64_UL_CONST(0x0000000010001680)
+#define SH_RTC3_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC3_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
 
 /*   SH_RTC3_INT_CONFIG_TYPE                                            */
 /*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
-#define SH_RTC3_INT_CONFIG_TYPE_SHFT             0
-#define SH_RTC3_INT_CONFIG_TYPE_MASK             0x0000000000000007
+#define SH_RTC3_INT_CONFIG_TYPE_SHFT			0
+#define SH_RTC3_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
 
 /*   SH_RTC3_INT_CONFIG_AGT                                             */
 /*   Description:  Agent, must be 0 for SHub                            */
-#define SH_RTC3_INT_CONFIG_AGT_SHFT              3
-#define SH_RTC3_INT_CONFIG_AGT_MASK              0x0000000000000008
+#define SH_RTC3_INT_CONFIG_AGT_SHFT			3
+#define SH_RTC3_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
 
 /*   SH_RTC3_INT_CONFIG_PID                                             */
 /*   Description:  Processor ID, same setting as on targeted McKinley  */
-#define SH_RTC3_INT_CONFIG_PID_SHFT              4
-#define SH_RTC3_INT_CONFIG_PID_MASK              0x00000000000ffff0
+#define SH_RTC3_INT_CONFIG_PID_SHFT			4
+#define SH_RTC3_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
 
 /*   SH_RTC3_INT_CONFIG_BASE                                            */
 /*   Description:  Optional interrupt vector area, 2MB aligned          */
-#define SH_RTC3_INT_CONFIG_BASE_SHFT             21
-#define SH_RTC3_INT_CONFIG_BASE_MASK             0x0003ffffffe00000
+#define SH_RTC3_INT_CONFIG_BASE_SHFT			21
+#define SH_RTC3_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
 
 /*   SH_RTC3_INT_CONFIG_IDX                                             */
 /*   Description:  Targeted McKinley interrupt vector                   */
-#define SH_RTC3_INT_CONFIG_IDX_SHFT              52
-#define SH_RTC3_INT_CONFIG_IDX_MASK              0x0ff0000000000000
+#define SH_RTC3_INT_CONFIG_IDX_SHFT			52
+#define SH_RTC3_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
 
 /* ==================================================================== */
 /*                    Register "SH_RTC3_INT_ENABLE"                     */
 /*                SHub RTC 3 Interrupt Enable Registers                 */
 /* ==================================================================== */
 
-#define SH1_RTC3_INT_ENABLE                      0x0000000110001700
-#define SH2_RTC3_INT_ENABLE                      0x0000000010001700
-#define SH_RTC3_INT_ENABLE_MASK                  0x0000000000000001
-#define SH_RTC3_INT_ENABLE_INIT                  0x0000000000000000
+#define SH1_RTC3_INT_ENABLE		__IA64_UL_CONST(0x0000000110001700)
+#define SH2_RTC3_INT_ENABLE		__IA64_UL_CONST(0x0000000010001700)
+#define SH_RTC3_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC3_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
 
 /*   SH_RTC3_INT_ENABLE_RTC3_ENABLE                                     */
 /*   Description:  Enable RTC 3 Interrupt                               */
-#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT      0
-#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK      0x0000000000000001
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT		0
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \
+					__IA64_UL_CONST(0x0000000000000001)
 
 /*   SH_EVENT_OCCURRED_RTC1_INT                                         */
 /*   Description:  Pending RTC 1 Interrupt                              */
-#define SH_EVENT_OCCURRED_RTC1_INT_SHFT          24
-#define SH_EVENT_OCCURRED_RTC1_INT_MASK          0x0000000001000000
+#define SH_EVENT_OCCURRED_RTC1_INT_SHFT			24
+#define SH_EVENT_OCCURRED_RTC1_INT_MASK	__IA64_UL_CONST(0x0000000001000000)
 
 /*   SH_EVENT_OCCURRED_RTC2_INT                                         */
 /*   Description:  Pending RTC 2 Interrupt                              */
-#define SH_EVENT_OCCURRED_RTC2_INT_SHFT          25
-#define SH_EVENT_OCCURRED_RTC2_INT_MASK          0x0000000002000000
+#define SH_EVENT_OCCURRED_RTC2_INT_SHFT			25
+#define SH_EVENT_OCCURRED_RTC2_INT_MASK	__IA64_UL_CONST(0x0000000002000000)
 
 /*   SH_EVENT_OCCURRED_RTC3_INT                                         */
 /*   Description:  Pending RTC 3 Interrupt                              */
-#define SH_EVENT_OCCURRED_RTC3_INT_SHFT          26
-#define SH_EVENT_OCCURRED_RTC3_INT_MASK          0x0000000004000000
+#define SH_EVENT_OCCURRED_RTC3_INT_SHFT			26
+#define SH_EVENT_OCCURRED_RTC3_INT_MASK	__IA64_UL_CONST(0x0000000004000000)
 
 /* ==================================================================== */
 /*                       Register "SH_IPI_ACCESS"                       */
 /*                 CPU interrupt Access Permission Bits                 */
 /* ==================================================================== */
 
-#define SH1_IPI_ACCESS                           0x0000000110060480
-#define SH2_IPI_ACCESS0                          0x0000000010060c00
-#define SH2_IPI_ACCESS1                          0x0000000010060c80
-#define SH2_IPI_ACCESS2                          0x0000000010060d00
-#define SH2_IPI_ACCESS3                          0x0000000010060d80
+#define SH1_IPI_ACCESS			__IA64_UL_CONST(0x0000000110060480)
+#define SH2_IPI_ACCESS0			__IA64_UL_CONST(0x0000000010060c00)
+#define SH2_IPI_ACCESS1			__IA64_UL_CONST(0x0000000010060c80)
+#define SH2_IPI_ACCESS2			__IA64_UL_CONST(0x0000000010060d00)
+#define SH2_IPI_ACCESS3			__IA64_UL_CONST(0x0000000010060d80)
 
 /* ==================================================================== */
 /*                        Register "SH_INT_CMPB"                        */
 /*                  RTC Compare Value for Processor B                   */
 /* ==================================================================== */
 
-#define SH1_INT_CMPB                             0x00000001101b0080
-#define SH2_INT_CMPB                             0x00000000101b0080
-#define SH_INT_CMPB_MASK                         0x007fffffffffffff
-#define SH_INT_CMPB_INIT                         0x0000000000000000
+#define SH1_INT_CMPB			__IA64_UL_CONST(0x00000001101b0080)
+#define SH2_INT_CMPB			__IA64_UL_CONST(0x00000000101b0080)
+#define SH_INT_CMPB_MASK		__IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPB_INIT		__IA64_UL_CONST(0x0000000000000000)
 
 /*   SH_INT_CMPB_REAL_TIME_CMPB                                         */
 /*   Description:  Real Time Clock Compare                              */
-#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT          0
-#define SH_INT_CMPB_REAL_TIME_CMPB_MASK          0x007fffffffffffff
+#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT			0
+#define SH_INT_CMPB_REAL_TIME_CMPB_MASK	__IA64_UL_CONST(0x007fffffffffffff)
 
 /* ==================================================================== */
 /*                        Register "SH_INT_CMPC"                        */
 /*                  RTC Compare Value for Processor C                   */
 /* ==================================================================== */
 
-#define SH1_INT_CMPC                             0x00000001101b0100
-#define SH2_INT_CMPC                             0x00000000101b0100
-#define SH_INT_CMPC_MASK                         0x007fffffffffffff
-#define SH_INT_CMPC_INIT                         0x0000000000000000
+#define SH1_INT_CMPC			__IA64_UL_CONST(0x00000001101b0100)
+#define SH2_INT_CMPC			__IA64_UL_CONST(0x00000000101b0100)
+#define SH_INT_CMPC_MASK		__IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPC_INIT		__IA64_UL_CONST(0x0000000000000000)
 
 /*   SH_INT_CMPC_REAL_TIME_CMPC                                         */
 /*   Description:  Real Time Clock Compare                              */
-#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT          0
-#define SH_INT_CMPC_REAL_TIME_CMPC_MASK          0x007fffffffffffff
+#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT			0
+#define SH_INT_CMPC_REAL_TIME_CMPC_MASK	__IA64_UL_CONST(0x007fffffffffffff)
 
 /* ==================================================================== */
 /*                        Register "SH_INT_CMPD"                        */
 /*                  RTC Compare Value for Processor D                   */
 /* ==================================================================== */
 
-#define SH1_INT_CMPD                             0x00000001101b0180
-#define SH2_INT_CMPD                             0x00000000101b0180
-#define SH_INT_CMPD_MASK                         0x007fffffffffffff
-#define SH_INT_CMPD_INIT                         0x0000000000000000
+#define SH1_INT_CMPD			__IA64_UL_CONST(0x00000001101b0180)
+#define SH2_INT_CMPD			__IA64_UL_CONST(0x00000000101b0180)
+#define SH_INT_CMPD_MASK		__IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPD_INIT		__IA64_UL_CONST(0x0000000000000000)
 
 /*   SH_INT_CMPD_REAL_TIME_CMPD                                         */
 /*   Description:  Real Time Clock Compare                              */
-#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT          0
-#define SH_INT_CMPD_REAL_TIME_CMPD_MASK          0x007fffffffffffff
+#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT			0
+#define SH_INT_CMPD_REAL_TIME_CMPD_MASK	__IA64_UL_CONST(0x007fffffffffffff)
 
 /* ==================================================================== */
 /*                Register "SH_MD_DQLP_MMR_DIR_PRIVEC0"                 */
 /*                      privilege vector for acc=0                      */
 /* ==================================================================== */
-
-#define SH1_MD_DQLP_MMR_DIR_PRIVEC0              0x0000000100030300
+#define SH1_MD_DQLP_MMR_DIR_PRIVEC0	__IA64_UL_CONST(0x0000000100030300)
 
 /* ==================================================================== */
 /*                Register "SH_MD_DQRP_MMR_DIR_PRIVEC0"                 */
 /*                      privilege vector for acc=0                      */
 /* ==================================================================== */
-
-#define SH1_MD_DQRP_MMR_DIR_PRIVEC0              0x0000000100050300
+#define SH1_MD_DQRP_MMR_DIR_PRIVEC0	__IA64_UL_CONST(0x0000000100050300)
 
 /* ==================================================================== */
 /* Some MMRs are functionally identical (or close enough) on both SHUB1 */
@@ -484,17 +486,17 @@
 /*                    Engine 0 Control and Status Register                    */
 /* ========================================================================== */
 
-#define SH2_BT_ENG_CSR_0                         0x0000000030040000
-#define SH2_BT_ENG_SRC_ADDR_0                    0x0000000030040080
-#define SH2_BT_ENG_DEST_ADDR_0                   0x0000000030040100
-#define SH2_BT_ENG_NOTIF_ADDR_0                  0x0000000030040180
+#define SH2_BT_ENG_CSR_0		__IA64_UL_CONST(0x0000000030040000)
+#define SH2_BT_ENG_SRC_ADDR_0		__IA64_UL_CONST(0x0000000030040080)
+#define SH2_BT_ENG_DEST_ADDR_0		__IA64_UL_CONST(0x0000000030040100)
+#define SH2_BT_ENG_NOTIF_ADDR_0		__IA64_UL_CONST(0x0000000030040180)
 
 /* ========================================================================== */
 /*                       BTE interfaces 1-3                                   */
 /* ========================================================================== */
 
-#define SH2_BT_ENG_CSR_1                         0x0000000030050000
-#define SH2_BT_ENG_CSR_2                         0x0000000030060000
-#define SH2_BT_ENG_CSR_3                         0x0000000030070000
+#define SH2_BT_ENG_CSR_1		__IA64_UL_CONST(0x0000000030050000)
+#define SH2_BT_ENG_CSR_2		__IA64_UL_CONST(0x0000000030060000)
+#define SH2_BT_ENG_CSR_3		__IA64_UL_CONST(0x0000000030070000)
 
 #endif /* _ASM_IA64_SN_SHUB_MMR_H */
diff --git a/include/asm-ia64/sn/simulator.h b/include/asm-ia64/sn/simulator.h
index 78eb4f869c8..cf770e246af 100644
--- a/include/asm-ia64/sn/simulator.h
+++ b/include/asm-ia64/sn/simulator.h
@@ -10,16 +10,17 @@
 
 #include <linux/config.h>
 
-#ifdef CONFIG_IA64_SGI_SN_SIM
-
 #define SNMAGIC 0xaeeeeeee8badbeefL
-#define IS_RUNNING_ON_SIMULATOR() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
-
-#define SIMULATOR_SLEEP()	asm("nop.i 0x8beef")
+#define IS_MEDUSA()			({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
 
+#ifdef CONFIG_IA64_SGI_SN_SIM
+#define SIMULATOR_SLEEP()		asm("nop.i 0x8beef")
+#define IS_RUNNING_ON_SIMULATOR() 	(sn_prom_type)
+#define IS_RUNNING_ON_FAKE_PROM()	(sn_prom_type == 2)
+extern int sn_prom_type;		/* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
 #else
-
 #define IS_RUNNING_ON_SIMULATOR()	(0)
+#define IS_RUNNING_ON_FAKE_PROM()	(0)
 #define SIMULATOR_SLEEP()
 
 #endif
diff --git a/include/asm-ia64/sn/sn2/sn_hwperf.h b/include/asm-ia64/sn/sn2/sn_hwperf.h
index b0c4d6dd77b..df75f4c4aec 100644
--- a/include/asm-ia64/sn/sn2/sn_hwperf.h
+++ b/include/asm-ia64/sn/sn2/sn_hwperf.h
@@ -223,4 +223,6 @@ struct sn_hwperf_ioctl_args {
 #define SN_HWPERF_OP_RECONFIGURE	253
 #define SN_HWPERF_OP_INVAL		254
 
+int sn_topology_open(struct inode *inode, struct file *file);
+int sn_topology_release(struct inode *inode, struct file *file);
 #endif				/* SN_HWPERF_H */
diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h
index eb0395ad0d6..1455375d2ce 100644
--- a/include/asm-ia64/sn/sn_sal.h
+++ b/include/asm-ia64/sn/sn_sal.h
@@ -132,6 +132,8 @@
 #define SALRET_INVALID_ARG	(-2)
 #define SALRET_ERROR		(-3)
 
+#define SN_SAL_FAKE_PROM			   0x02009999
+
 
 /**
  * sn_sal_rev_major - get the major SGI SAL revision number
@@ -1105,4 +1107,12 @@ ia64_sn_bte_recovery(nasid_t nasid)
 	return (int) rv.status;
 }
 
+static inline int
+ia64_sn_is_fake_prom(void)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0);
+	return (rv.status == 0);
+}
+
 #endif /* _ASM_IA64_SN_SN_SAL_H */
diff --git a/include/asm-ia64/sn/tioca_provider.h b/include/asm-ia64/sn/tioca_provider.h
index b6acc22ab23..5ccec608d32 100644
--- a/include/asm-ia64/sn/tioca_provider.h
+++ b/include/asm-ia64/sn/tioca_provider.h
@@ -201,6 +201,7 @@ tioca_tlbflush(struct tioca_kernel *tioca_kernel)
 }
 
 extern uint32_t	tioca_gart_found;
+extern struct list_head tioca_list;
 extern int tioca_init_provider(void);
 extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern);
 #endif /* _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H */
diff --git a/include/asm-ia64/vga.h b/include/asm-ia64/vga.h
index 1f446d6841f..bc3349ffc50 100644
--- a/include/asm-ia64/vga.h
+++ b/include/asm-ia64/vga.h
@@ -14,7 +14,10 @@
  * videoram directly without any black magic.
  */
 
-#define VGA_MAP_MEM(x)	((unsigned long) ioremap((x), 0))
+extern unsigned long vga_console_iobase;
+extern unsigned long vga_console_membase;
+
+#define VGA_MAP_MEM(x)	((unsigned long) ioremap(vga_console_membase + (x), 0))
 
 #define vga_readb(x)	(*(x))
 #define vga_writeb(x,y)	(*(y) = (x))
diff --git a/include/asm-m68k/serial.h b/include/asm-m68k/serial.h
index 9f5bcdc105f..3fe29f8b019 100644
--- a/include/asm-m68k/serial.h
+++ b/include/asm-m68k/serial.h
@@ -26,54 +26,9 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#endif
-
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS },	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index 8a70ff58f76..4eed8e2acdc 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -29,32 +29,6 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#define RS_TABLE_SIZE	64
-#else
-#define RS_TABLE_SIZE
-#endif
-
-/*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-
 #ifdef CONFIG_MACH_JAZZ
 #include <asm/jazz.h>
 
@@ -240,66 +214,10 @@
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },			/* ttyS14 (spare) */ \
-	{ 0, BASE_BAUD, 0x000, 0, 0 },			/* ttyS15 (spare) */ \
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else /* CONFIG_SERIAL_MANY_PORTS */
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif /* CONFIG_SERIAL_MANY_PORTS */
-
 #else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
 #define STD_SERIAL_PORT_DEFNS
-#define EXTRA_SERIAL_PORT_DEFNS
 #endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
 
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
- */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS		\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
 #ifdef CONFIG_MOMENCO_JAGUAR_ATX
 /* Ordinary NS16552 duart with a 20MHz crystal.  */
 #define JAGUAR_ATX_UART_CLK	20000000
@@ -427,8 +345,6 @@
 	COBALT_SERIAL_PORT_DEFNS			\
 	DDB5477_SERIAL_PORT_DEFNS			\
 	EV96100_SERIAL_PORT_DEFNS			\
-	EXTRA_SERIAL_PORT_DEFNS				\
-	HUB6_SERIAL_PORT_DFNS				\
 	IP32_SERIAL_PORT_DEFNS                          \
 	ITE_SERIAL_PORT_DEFNS           		\
 	IVR_SERIAL_PORT_DEFNS           		\
diff --git a/include/asm-parisc/serial.h b/include/asm-parisc/serial.h
index 239c5dcab7e..82fd820d684 100644
--- a/include/asm-parisc/serial.h
+++ b/include/asm-parisc/serial.h
@@ -19,18 +19,4 @@
  * A500 w/ PCI serial cards: 5 + 4 * card ~= 17
  */
  
-#define STD_SERIAL_PORT_DEFNS			\
-	{ 0, },		/* ttyS0 */	\
-	{ 0, },		/* ttyS1 */	\
-	{ 0, },		/* ttyS2 */	\
-	{ 0, },		/* ttyS3 */	\
-	{ 0, },		/* ttyS4 */	\
-	{ 0, },		/* ttyS5 */	\
-	{ 0, },		/* ttyS6 */	\
-	{ 0, },		/* ttyS7 */	\
-	{ 0, },		/* ttyS8 */
-
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS
-
+#define SERIAL_PORT_DFNS
diff --git a/include/asm-ppc/pc_serial.h b/include/asm-ppc/pc_serial.h
index fa9cbb67ce3..8f994f9f885 100644
--- a/include/asm-ppc/pc_serial.h
+++ b/include/asm-ppc/pc_serial.h
@@ -35,93 +35,9 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#endif
-	
-/*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
- */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS		\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS		\
-	HUB6_SERIAL_PORT_DFNS
diff --git a/include/asm-sh/bigsur/serial.h b/include/asm-sh/bigsur/serial.h
index 540f1220592..7233af42f75 100644
--- a/include/asm-sh/bigsur/serial.h
+++ b/include/asm-sh/bigsur/serial.h
@@ -14,13 +14,10 @@
 #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
 
 
-#define STD_SERIAL_PORT_DEFNS                   \
+#define SERIAL_PORT_DFNS                   \
         /* UART CLK   PORT IRQ     FLAGS        */                      \
         { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ 
 
-
-#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
-
 /* XXX: This should be moved ino irq.h */
 #define irq_cannonicalize(x) (x)
 
diff --git a/include/asm-sh/ec3104/serial.h b/include/asm-sh/ec3104/serial.h
index f8eb16312ed..cfe4d78ec1e 100644
--- a/include/asm-sh/ec3104/serial.h
+++ b/include/asm-sh/ec3104/serial.h
@@ -10,13 +10,11 @@
  * it's got the keyboard controller behind it so we can't really use it
  * (without moving the keyboard driver to userspace, which doesn't sound
  * like a very good idea) */
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x11C00, EC3104_IRQBASE+7, STD_COM_FLAGS }, /* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x12000, EC3104_IRQBASE+8, STD_COM_FLAGS }, /* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x12400, EC3104_IRQBASE+9, STD_COM_FLAGS }, /* ttyS2 */
 
-#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
-
 /* XXX: This should be moved ino irq.h */
 #define irq_cannonicalize(x) (x)
diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h
index 5474dbdbaa8..f51e232d5cd 100644
--- a/include/asm-sh/serial.h
+++ b/include/asm-sh/serial.h
@@ -29,20 +29,18 @@
 #ifdef CONFIG_HD64465
 #include <asm/hd64465.h>
 
-#define STD_SERIAL_PORT_DEFNS                   \
+#define SERIAL_PORT_DFNS                   \
         /* UART CLK   PORT IRQ     FLAGS        */                      \
         { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS }  /* ttyS0 */
 
 #else
 
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }	/* ttyS1 */
 
 #endif
 
-#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
-
 #endif
 #endif /* _ASM_SERIAL_H */
diff --git a/include/asm-sh64/serial.h b/include/asm-sh64/serial.h
index 8e39b4e90c7..29c9be15112 100644
--- a/include/asm-sh64/serial.h
+++ b/include/asm-sh64/serial.h
@@ -20,13 +20,11 @@
 
 #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
 
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }	/* ttyS1 */
 
-#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
-
 /* XXX: This should be moved ino irq.h */
 #define irq_cannonicalize(x) (x)
 
diff --git a/include/asm-x86_64/serial.h b/include/asm-x86_64/serial.h
index dbab232044c..dc752eafa68 100644
--- a/include/asm-x86_64/serial.h
+++ b/include/asm-x86_64/serial.h
@@ -22,109 +22,9 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#endif
-
-#define MCA_COM_FLAGS	(STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA)
-
-/*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
- */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS		\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
-#ifdef CONFIG_MCA
-#define MCA_SERIAL_PORT_DFNS			\
-	{ 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS },
-#else
-#define MCA_SERIAL_PORT_DFNS
-#endif
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS		\
-	HUB6_SERIAL_PORT_DFNS		\
-	MCA_SERIAL_PORT_DFNS
-