summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2009-02-05 12:06:51 +1100
committerLinus Torvalds <torvalds@linux-foundation.org>2009-02-08 10:48:56 -0800
commitb746bb77627cba62765ff2afeec9cc9a8cbb926c (patch)
treed6a1b84104e0891d1d39d2968db3194e26b392d0
parentb7468168631e03c70105491a0236137868613436 (diff)
downloadlinux-3.10-b746bb77627cba62765ff2afeec9cc9a8cbb926c.tar.gz
linux-3.10-b746bb77627cba62765ff2afeec9cc9a8cbb926c.tar.bz2
linux-3.10-b746bb77627cba62765ff2afeec9cc9a8cbb926c.zip
aty128fb: Properly save PCI state before changing PCI PM level
This fixes aty128fb to properly save the PCI config space -before- it potentially switches the PM state of the chip. This avoids a warning with the new PM core and is the right thing to do anyway. I also replaced the hand-coded switch to D2 with a call to the genericc pci_set_power_state() and removed the code that switches it back to D0 since the generic code is doing that for us nowadays. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--drivers/video/aty/aty128fb.c25
1 files changed, 15 insertions, 10 deletions
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index fb2b0f5b23b..e6e299feb51 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2374,6 +2374,8 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
/* Set the chip into the appropriate suspend mode (we use D2,
* D3 would require a complete re-initialisation of the chip,
* including PCI config registers, clocks, AGP configuration, ...)
+ *
+ * For resume, the core will have already brought us back to D0
*/
if (suspend) {
/* Make sure CRTC2 is reset. Remove that the day we decide to
@@ -2391,17 +2393,9 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
aty_st_le32(BUS_CNTL1, 0x00000010);
aty_st_le32(MEM_POWER_MISC, 0x0c830000);
mdelay(100);
- pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+
/* Switch PCI power management to D2 */
- pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL,
- (pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2);
- pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
- } else {
- /* Switch back PCI power management to D0 */
- mdelay(100);
- pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0);
- pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
- mdelay(100);
+ pci_set_power_state(pdev, PCI_D2);
}
}
@@ -2410,6 +2404,12 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
struct fb_info *info = pci_get_drvdata(pdev);
struct aty128fb_par *par = info->par;
+ /* Because we may change PCI D state ourselves, we need to
+ * first save the config space content so the core can
+ * restore it properly on resume.
+ */
+ pci_save_state(pdev);
+
/* We don't do anything but D2, for now we return 0, but
* we may want to change that. How do we know if the BIOS
* can properly take care of D3 ? Also, with swsusp, we
@@ -2476,6 +2476,11 @@ static int aty128_do_resume(struct pci_dev *pdev)
if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
+ /* PCI state will have been restored by the core, so
+ * we should be in D0 now with our config space fully
+ * restored
+ */
+
/* Wakeup chip */
aty128_set_suspend(par, 0);
par->asleep = 0;