summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-03-03 17:48:55 +0100
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-03-03 17:48:55 +0100
commitb6209a90eca8c9a464bf9c5b91741fb125185619 (patch)
tree1abca15051b7654571e7286fd9ae5dabf44a0816
parente76ecf86da99383f59f4c85f594403c5c3c1fe91 (diff)
downloadlinux-3.10-b6209a90eca8c9a464bf9c5b91741fb125185619.tar.gz
linux-3.10-b6209a90eca8c9a464bf9c5b91741fb125185619.tar.bz2
linux-3.10-b6209a90eca8c9a464bf9c5b91741fb125185619.zip
ide: remove some obsoleted kernel params (v2)
Remove * "hdx=serialize" * "idex=noautotune" * "idex=autotune" kernel params, they have been obsoleted for ages. "idex=serialize", "hdx=noautotune" and "hdx=autotune" are still available so there is no funcionality loss caused by this patch. v2: * fix CONFIG_BLK_DEV_4DRIVES=y build broken by version 1 of the patch [ /me wearing brown paper bag ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-rw-r--r--Documentation/ide.txt15
-rw-r--r--drivers/ide/ide.c23
-rw-r--r--drivers/ide/legacy/qd65xx.c4
-rw-r--r--drivers/ide/pci/opti621.c2
4 files changed, 14 insertions, 30 deletions
diff --git a/Documentation/ide.txt b/Documentation/ide.txt
index 786c3a76699..82349f5cd3d 100644
--- a/Documentation/ide.txt
+++ b/Documentation/ide.txt
@@ -232,7 +232,9 @@ Summary of ide driver parameters for kernel command line
"hdx=remap63" : remap the drive: add 63 to all sector numbers
(for DM OnTrack)
-
+
+ "idex=noautotune" : driver will NOT attempt to tune interface speed
+
"hdx=autotune" : driver will attempt to tune interface speed
to the fastest PIO mode supported,
if possible for this drive only.
@@ -267,17 +269,6 @@ Summary of ide driver parameters for kernel command line
"idex=base,ctl" : specify both base and ctl
"idex=base,ctl,irq" : specify base, ctl, and irq number
-
- "idex=autotune" : driver will attempt to tune interface speed
- to the fastest PIO mode supported,
- for all drives on this interface.
- Not fully supported by all chipset types,
- and quite likely to cause trouble with
- older/odd IDE drives.
-
- "idex=noautotune" : driver will NOT attempt to tune interface speed
- This is the default for most chipsets,
- except the cmd640.
"idex=serialize" : do not overlap operations on idex. Please note
that you will have to specify this option for
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 48a087dfc59..ac1a720f182 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1578,7 +1578,7 @@ static int __init ide_setup(char *s)
*/
if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
const char *hd_words[] = {
- "none", "noprobe", "nowerr", "cdrom", "serialize",
+ "none", "noprobe", "nowerr", "cdrom", "minus5",
"autotune", "noautotune", "minus8", "swapdata", "bswap",
"noflush", "remap", "remap63", "scsi", NULL };
unit = s[2] - 'a';
@@ -1606,9 +1606,6 @@ static int __init ide_setup(char *s)
drive->ready_stat = 0;
hwif->noprobe = 0;
goto done;
- case -5: /* "serialize" */
- printk(" -- USE \"ide%d=serialize\" INSTEAD", hw);
- goto do_serialize;
case -6: /* "autotune" */
drive->autotune = IDE_TUNE_AUTO;
goto obsolete_option;
@@ -1669,7 +1666,7 @@ static int __init ide_setup(char *s)
* (-8, -9, -10) are reserved to ease the hardcoding.
*/
static const char *ide_words[] = {
- "noprobe", "serialize", "autotune", "noautotune",
+ "noprobe", "serialize", "minus3", "minus4",
"reset", "dma", "ata66", "minus8", "minus9",
"minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
"dtc2278", "umc8672", "ali14xx", NULL };
@@ -1740,12 +1737,17 @@ static int __init ide_setup(char *s)
hwif->chipset = mate->chipset = ide_4drives;
mate->irq = hwif->irq;
memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
- goto do_serialize;
+ hwif->mate = mate;
+ mate->mate = hwif;
+ hwif->serialized = mate->serialized = 1;
+ goto obsolete_option;
}
#endif /* CONFIG_BLK_DEV_4DRIVES */
case -10: /* minus10 */
case -9: /* minus9 */
case -8: /* minus8 */
+ case -4:
+ case -3:
goto bad_option;
case -7: /* ata66 */
#ifdef CONFIG_BLK_DEV_IDEPCI
@@ -1760,16 +1762,7 @@ static int __init ide_setup(char *s)
case -5: /* "reset" */
hwif->reset = 1;
goto obsolete_option;
- case -4: /* "noautotune" */
- hwif->drives[0].autotune = IDE_TUNE_NOAUTO;
- hwif->drives[1].autotune = IDE_TUNE_NOAUTO;
- goto obsolete_option;
- case -3: /* "autotune" */
- hwif->drives[0].autotune = IDE_TUNE_AUTO;
- hwif->drives[1].autotune = IDE_TUNE_AUTO;
- goto obsolete_option;
case -2: /* "serialize" */
- do_serialize:
hwif->mate = &ide_hwifs[hw^1];
hwif->mate->mate = hwif;
hwif->serialized = hwif->mate->serialized = 1;
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 584e26c96b4..ab482c85e41 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -16,8 +16,8 @@
* Please set local bus speed using kernel parameter idebus
* for example, "idebus=33" stands for 33Mhz VLbus
* To activate controller support, use "ide0=qd65xx"
- * To enable tuning, use "ide0=autotune"
- * To enable second channel tuning (qd6580 only), use "ide1=autotune"
+ * To enable tuning, use "hda=autotune hdb=autotune"
+ * To enable 2nd channel tuning (qd6580 only), use "hdc=autotune hdd=autotune"
*/
/*
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index af9aaafa55b..aede7eee924 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -57,7 +57,7 @@
* There is a 25/33MHz switch in configuration
* register, but driver is written for use at any frequency which get
* (use idebus=xx to select PCI bus speed).
- * Use ide0=autotune for automatical tune of the PIO modes.
+ * Use hda=autotune and hdb=autotune for automatical tune of the PIO modes.
* If you get strange results, do not use this and set PIO manually
* by hdparm.
*