diff options
| author | Hauke Mehrtens <hauke@hauke-m.de> | 2012-04-29 02:50:32 +0200 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2012-05-16 12:45:24 -0400 |
| commit | b30ee754400d16606fc6308fa36ad4f49a72ff85 (patch) | |
| tree | c916cb29b78e261650d6d7067256993dc934587a | |
| parent | 63286295e6e069649b3234c3080d9c141524daea (diff) | |
| download | linux-3.10-b30ee754400d16606fc6308fa36ad4f49a72ff85.tar.gz linux-3.10-b30ee754400d16606fc6308fa36ad4f49a72ff85.tar.bz2 linux-3.10-b30ee754400d16606fc6308fa36ad4f49a72ff85.zip | |
brcmsmac: remove ai_pci_setup()
This is now done by calling bcma_core_pci_irq_ctl()
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/aiutils.c | 23 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/aiutils.h | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/main.c | 7 |
3 files changed, 2 insertions, 29 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c index fd99e7bd0dc..585a5169ca5 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c @@ -843,29 +843,6 @@ void ai_pci_down(struct si_pub *sih) } /* - * Configure the pci core for pci client (NIC) action - * coremask is the bitvec of cores by index to be enabled. - */ -void ai_pci_setup(struct si_pub *sih, uint coremask) -{ - struct si_info *sii; - u32 w; - - sii = (struct si_info *)sih; - - /* - * Enable sb->pci interrupts. Assume - * PCI rev 2.3 support was added in pci core rev 6 and things changed.. - */ - if (PCIE(sih)) { - /* pci config write to set this core bit in PCIIntMask */ - pci_read_config_dword(sii->pcibus, PCI_INT_MASK, &w); - w |= (coremask << PCI_SBIM_SHIFT); - pci_write_config_dword(sii->pcibus, PCI_INT_MASK, w); - } -} - -/* * Fixup SROMless PCI device's configuration. * The current core may be changed upon return. */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h index 4ea166c8bba..39942572013 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h @@ -196,7 +196,6 @@ extern u32 ai_core_cflags(struct bcma_device *core, u32 mask, u32 val); extern struct si_pub *ai_attach(struct bcma_bus *pbus); extern void ai_detach(struct si_pub *sih); extern uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val); -extern void ai_pci_setup(struct si_pub *sih, uint coremask); extern void ai_clkctl_init(struct si_pub *sih); extern u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih); extern bool ai_clkctl_cc(struct si_pub *sih, uint mode); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 5e5d8b96d8e..9cd7c05443e 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -5050,8 +5050,6 @@ static void brcms_b_hw_up(struct brcms_hardware *wlc_hw) static int brcms_b_up_prep(struct brcms_hardware *wlc_hw) { - uint coremask; - BCMMSG(wlc_hw->wlc->wiphy, "wl%d\n", wlc_hw->unit); /* @@ -5066,9 +5064,8 @@ static int brcms_b_up_prep(struct brcms_hardware *wlc_hw) * Configure pci/pcmcia here instead of in brcms_c_attach() * to allow mfg hotswap: down, hotswap (chip power cycle), up. */ - coremask = (1 << wlc_hw->wlc->core->coreidx); - - ai_pci_setup(wlc_hw->sih, coremask); + bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci, wlc_hw->d11core, + true); /* * Need to read the hwradio status here to cover the case where the |