summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJames Smart <james.smart@emulex.com>2011-04-16 11:03:17 -0400
committerJames Bottomley <James.Bottomley@suse.de>2011-05-01 11:03:38 -0500
commit9589b062f53e314ea3abfaca8de7a260b4ef69c2 (patch)
treee1a1e7138e2950aac7a83a7833fe50a9271b8288
parent86a80846a68eeb8575119db61f6b262f49522e6f (diff)
downloadlinux-3.10-9589b062f53e314ea3abfaca8de7a260b4ef69c2.tar.gz
linux-3.10-9589b062f53e314ea3abfaca8de7a260b4ef69c2.tar.bz2
linux-3.10-9589b062f53e314ea3abfaca8de7a260b4ef69c2.zip
[SCSI] lpfc 8.3.23: Miscellaneous fixes
Miscellaneous fixes - Do not limit RPI Count to a minimum of 64 - Fix FCFI incorrect on received unsolicited frames. - Save the FCFI returned in the REG_FCFI mailbox command if it was successful. - Fixed Vports not sending FDISC after lips. - Align based on the SLI4_PAGE_SIZE. - Fixed double byte swap on received RRQ. - Fixed mask size for the wq_id mask from 0x7F to 0x7FFF. - Clear FC_FABRIC flag when NPIV LOGO completes (and add a log message). - Modified driver to skip round robin only when ulpStatus==LOCAL_REJECT and word4=SEQUENCE_TIMEOUT to prevent FLOGI to disconnected FCF. - Don't add rport if driver unloading Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c27
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c6
-rw-r--r--drivers/scsi/lpfc/lpfc_hw4.h4
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c7
-rw-r--r--drivers/scsi/lpfc/lpfc_mbox.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c7
6 files changed, 39 insertions, 14 deletions
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index d34b69f9cdb..04a5aeb4147 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -670,6 +670,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
* Driver needs to re-reg VPI in order for f/w
* to update the MAC address.
*/
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
lpfc_register_new_vport(phba, vport, ndlp);
return 0;
}
@@ -869,8 +870,8 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
*/
if ((phba->hba_flag & HBA_FIP_SUPPORT) &&
(phba->fcf.fcf_flag & FCF_DISCOVERY) &&
- (irsp->ulpStatus != IOSTAT_LOCAL_REJECT) &&
- (irsp->un.ulpWord[4] != IOERR_SLI_ABORTED)) {
+ !((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+ (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED))) {
lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
"2611 FLOGI failed on FCF (x%x), "
"status:x%x/x%x, tmo:x%x, perform "
@@ -4107,13 +4108,13 @@ lpfc_els_clear_rrq(struct lpfc_vport *vport,
pcmd += sizeof(uint32_t);
rrq = (struct RRQ *)pcmd;
rrq->rrq_exchg = be32_to_cpu(rrq->rrq_exchg);
- rxid = be16_to_cpu(bf_get(rrq_rxid, rrq));
+ rxid = bf_get(rrq_rxid, rrq);
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"2883 Clear RRQ for SID:x%x OXID:x%x RXID:x%x"
" x%x x%x\n",
be32_to_cpu(bf_get(rrq_did, rrq)),
- be16_to_cpu(bf_get(rrq_oxid, rrq)),
+ bf_get(rrq_oxid, rrq),
rxid,
iocb->iotag, iocb->iocb.ulpContext);
@@ -4121,7 +4122,7 @@ lpfc_els_clear_rrq(struct lpfc_vport *vport,
"Clear RRQ: did:x%x flg:x%x exchg:x%.08x",
ndlp->nlp_DID, ndlp->nlp_flag, rrq->rrq_exchg);
if (vport->fc_myDID == be32_to_cpu(bf_get(rrq_did, rrq)))
- xri = be16_to_cpu(bf_get(rrq_oxid, rrq));
+ xri = bf_get(rrq_oxid, rrq);
else
xri = rxid;
prrq = lpfc_get_active_rrq(vport, xri, ndlp->nlp_DID);
@@ -7290,8 +7291,9 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_vport *vport = cmdiocb->vport;
IOCB_t *irsp;
struct lpfc_nodelist *ndlp;
- ndlp = (struct lpfc_nodelist *)cmdiocb->context1;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+ ndlp = (struct lpfc_nodelist *)cmdiocb->context1;
irsp = &rspiocb->iocb;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"LOGO npiv cmpl: status:x%x/x%x did:x%x",
@@ -7302,6 +7304,19 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
/* Trigger the release of the ndlp after logo */
lpfc_nlp_put(ndlp);
+
+ /* NPIV LOGO completes to NPort <nlp_DID> */
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+ "2928 NPIV LOGO completes to NPort x%x "
+ "Data: x%x x%x x%x x%x\n",
+ ndlp->nlp_DID, irsp->ulpStatus, irsp->un.ulpWord[4],
+ irsp->ulpTimeout, vport->num_disc_nodes);
+
+ if (irsp->ulpStatus == IOSTAT_SUCCESS) {
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag &= ~FC_FABRIC;
+ spin_unlock_irq(shost->host_lock);
+ }
}
/**
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 301498301a8..7a35df5e203 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2011 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -3569,6 +3569,10 @@ lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
"rport add: did:x%x flg:x%x type x%x",
ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
+ /* Don't add the remote port if unloading. */
+ if (vport->load_flag & FC_UNLOADING)
+ return;
+
ndlp->rport = rport = fc_remote_port_add(shost, 0, &rport_ids);
if (!rport || !get_device(&rport->dev)) {
dev_printk(KERN_WARNING, &phba->pcidev->dev,
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 8433ac0d9fb..a8e2c6993d4 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -2108,6 +2108,8 @@ struct lpfc_mbx_pc_sli4_params {
#define sgl_pp_align_WORD word12
uint32_t rsvd_13_63[51];
};
+#define SLI4_PAGE_ALIGN(addr) (((addr)+((SLI4_PAGE_SIZE)-1)) \
+ &(~((SLI4_PAGE_SIZE)-1)))
struct lpfc_sli4_parameters {
uint32_t word0;
@@ -2524,7 +2526,7 @@ struct wqe_common {
#define wqe_wqes_WORD word10
/* Note that this field overlaps above fields */
#define wqe_wqid_SHIFT 1
-#define wqe_wqid_MASK 0x0000007f
+#define wqe_wqid_MASK 0x00007fff
#define wqe_wqid_WORD word10
#define wqe_pri_SHIFT 16
#define wqe_pri_MASK 0x00000007
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 505f88443b5..7b6a089796d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4906,6 +4906,7 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
uint16_t rpi_limit, curr_rpi_range;
struct lpfc_dmabuf *dmabuf;
struct lpfc_rpi_hdr *rpi_hdr;
+ uint32_t rpi_count;
rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
phba->sli4_hba.max_cfg_param.max_rpi - 1;
@@ -4920,7 +4921,9 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
* and to allow the full max_rpi range per port.
*/
if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
- return NULL;
+ rpi_count = rpi_limit - curr_rpi_range;
+ else
+ rpi_count = LPFC_RPI_HDR_COUNT;
/*
* First allocate the protocol header region for the port. The
@@ -4961,7 +4964,7 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
* The next_rpi stores the next module-64 rpi value to post
* in any subsequent rpi memory region postings.
*/
- phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
+ phba->sli4_hba.next_rpi += rpi_count;
spin_unlock_irq(&phba->hbalock);
return rpi_hdr;
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index fbab9734e9b..e6ce9033f85 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1736,7 +1736,7 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
}
/* Setup for the none-embedded mbox command */
- pcount = (PAGE_ALIGN(length))/SLI4_PAGE_SIZE;
+ pcount = (SLI4_PAGE_ALIGN(length))/SLI4_PAGE_SIZE;
pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ?
LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount;
/* Allocate record for keeping SGE virtual addresses */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index dacabbe0a58..580b00bc35c 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -5018,10 +5018,11 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
lpfc_reg_fcfi(phba, mboxq);
mboxq->vport = phba->pport;
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
- if (rc == MBX_SUCCESS)
- rc = 0;
- else
+ if (rc != MBX_SUCCESS)
goto out_unset_queue;
+ rc = 0;
+ phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi,
+ &mboxq->u.mqe.un.reg_fcfi);
}
/*
* The port is ready, set the host's link state to LINK_DOWN