diff options
author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2010-12-01 19:59:50 +0000 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2010-12-10 22:12:32 -0800 |
commit | 667445008db3f45a760c235d771be0c9671e59e5 (patch) | |
tree | 6b6fea62bfcfeb78a6deeb851b70c8eda0700c17 | |
parent | 19a0b67afd174c4db261d587b5c67704dcd53c17 (diff) | |
download | linux-3.10-667445008db3f45a760c235d771be0c9671e59e5.tar.gz linux-3.10-667445008db3f45a760c235d771be0c9671e59e5.tar.bz2 linux-3.10-667445008db3f45a760c235d771be0c9671e59e5.zip |
Intel Wired LAN drivers: Use static const
Based on work by Joe Perches <joe@perches.com>
Using static const to decrease data and overall object size.
CC: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
-rw-r--r-- | drivers/net/e1000/e1000_hw.c | 20 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_param.c | 13 | ||||
-rw-r--r-- | drivers/net/e1000e/phy.c | 11 | ||||
-rw-r--r-- | drivers/net/igb/e1000_phy.c | 11 | ||||
-rw-r--r-- | drivers/net/ixgb/ixgb_param.c | 21 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_ethtool.c | 24 | ||||
-rw-r--r-- | drivers/net/ixgbevf/ethtool.c | 18 |
7 files changed, 65 insertions, 53 deletions
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index c7e242b69a1..77d08e697b7 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -4892,11 +4892,11 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */ u16 cur_agc_value; u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE; - u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = - { IGP01E1000_PHY_AGC_A, - IGP01E1000_PHY_AGC_B, - IGP01E1000_PHY_AGC_C, - IGP01E1000_PHY_AGC_D + static const u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = { + IGP01E1000_PHY_AGC_A, + IGP01E1000_PHY_AGC_B, + IGP01E1000_PHY_AGC_C, + IGP01E1000_PHY_AGC_D }; /* Read the AGC registers for all channels */ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { @@ -5071,11 +5071,11 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) { s32 ret_val; u16 phy_data, phy_saved_data, speed, duplex, i; - u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = - { IGP01E1000_PHY_AGC_PARAM_A, - IGP01E1000_PHY_AGC_PARAM_B, - IGP01E1000_PHY_AGC_PARAM_C, - IGP01E1000_PHY_AGC_PARAM_D + static const u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = { + IGP01E1000_PHY_AGC_PARAM_A, + IGP01E1000_PHY_AGC_PARAM_B, + IGP01E1000_PHY_AGC_PARAM_C, + IGP01E1000_PHY_AGC_PARAM_D }; u16 min_length, max_length; diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 10d8d98bb79..1301eba8b57 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -352,12 +352,13 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) } { /* Flow Control */ - struct e1000_opt_list fc_list[] = - {{ E1000_FC_NONE, "Flow Control Disabled" }, - { E1000_FC_RX_PAUSE,"Flow Control Receive Only" }, - { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" }, - { E1000_FC_FULL, "Flow Control Enabled" }, - { E1000_FC_DEFAULT, "Flow Control Hardware Default" }}; + static const struct e1000_opt_list fc_list[] = { + { E1000_FC_NONE, "Flow Control Disabled" }, + { E1000_FC_RX_PAUSE, "Flow Control Receive Only" }, + { E1000_FC_TX_PAUSE, "Flow Control Transmit Only" }, + { E1000_FC_FULL, "Flow Control Enabled" }, + { E1000_FC_DEFAULT, "Flow Control Hardware Default" } + }; opt = (struct e1000_option) { .type = list_option, diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 3d3dc0c8235..6ad90ccb4ba 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -1840,11 +1840,12 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw) u16 phy_data, i, agc_value = 0; u16 cur_agc_index, max_agc_index = 0; u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; - u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = - {IGP02E1000_PHY_AGC_A, - IGP02E1000_PHY_AGC_B, - IGP02E1000_PHY_AGC_C, - IGP02E1000_PHY_AGC_D}; + static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { + IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D + }; /* Read the AGC registers for all channels */ for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index ddd036a7899..6694bf3e5ad 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -1757,11 +1757,12 @@ s32 igb_get_cable_length_igp_2(struct e1000_hw *hw) u16 phy_data, i, agc_value = 0; u16 cur_agc_index, max_agc_index = 0; u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; - u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = - {IGP02E1000_PHY_AGC_A, - IGP02E1000_PHY_AGC_B, - IGP02E1000_PHY_AGC_C, - IGP02E1000_PHY_AGC_D}; + static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { + IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D + }; /* Read the AGC registers for all channels */ for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ixgb/ixgb_param.c index 88a08f05624..dd7fbeb1f7d 100644 --- a/drivers/net/ixgb/ixgb_param.c +++ b/drivers/net/ixgb/ixgb_param.c @@ -191,9 +191,9 @@ struct ixgb_option { } r; struct { /* list_option info */ int nr; - struct ixgb_opt_list { + const struct ixgb_opt_list { int i; - char *str; + const char *str; } *p; } l; } arg; @@ -226,7 +226,7 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt) break; case list_option: { int i; - struct ixgb_opt_list *ent; + const struct ixgb_opt_list *ent; for (i = 0; i < opt->arg.l.nr; i++) { ent = &opt->arg.l.p[i]; @@ -322,14 +322,15 @@ ixgb_check_options(struct ixgb_adapter *adapter) } { /* Flow Control */ - struct ixgb_opt_list fc_list[] = - {{ ixgb_fc_none, "Flow Control Disabled" }, - { ixgb_fc_rx_pause,"Flow Control Receive Only" }, - { ixgb_fc_tx_pause,"Flow Control Transmit Only" }, - { ixgb_fc_full, "Flow Control Enabled" }, - { ixgb_fc_default, "Flow Control Hardware Default" }}; + static const struct ixgb_opt_list fc_list[] = { + { ixgb_fc_none, "Flow Control Disabled" }, + { ixgb_fc_rx_pause, "Flow Control Receive Only" }, + { ixgb_fc_tx_pause, "Flow Control Transmit Only" }, + { ixgb_fc_full, "Flow Control Enabled" }, + { ixgb_fc_default, "Flow Control Hardware Default" } + }; - const struct ixgb_option opt = { + static const struct ixgb_option opt = { .type = list_option, .name = "Flow Control", .err = "reading default settings from EEPROM", diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index ef3f9105a05..90a740d77e5 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -1157,7 +1157,7 @@ struct ixgbe_reg_test { #define TABLE64_TEST_HI 6 /* default 82599 register test */ -static struct ixgbe_reg_test reg_test_82599[] = { +static const struct ixgbe_reg_test reg_test_82599[] = { { IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, { IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, @@ -1181,7 +1181,7 @@ static struct ixgbe_reg_test reg_test_82599[] = { }; /* default 82598 register test */ -static struct ixgbe_reg_test reg_test_82598[] = { +static const struct ixgbe_reg_test reg_test_82598[] = { { IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, @@ -1208,18 +1208,22 @@ static struct ixgbe_reg_test reg_test_82598[] = { { 0, 0, 0, 0 } }; +static const u32 register_test_patterns[] = { + 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF +}; + #define REG_PATTERN_TEST(R, M, W) \ { \ u32 pat, val, before; \ - const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \ - for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { \ + for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) { \ before = readl(adapter->hw.hw_addr + R); \ - writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \ + writel((register_test_patterns[pat] & W), \ + (adapter->hw.hw_addr + R)); \ val = readl(adapter->hw.hw_addr + R); \ - if (val != (_test[pat] & W & M)) { \ - e_err(drv, "pattern test reg %04X failed: got " \ - "0x%08X expected 0x%08X\n", \ - R, val, (_test[pat] & W & M)); \ + if (val != (register_test_patterns[pat] & W & M)) { \ + e_err(drv, "pattern test reg %04X failed: got " \ + "0x%08X expected 0x%08X\n", \ + R, val, (register_test_patterns[pat] & W & M)); \ *data = R; \ writel(before, adapter->hw.hw_addr + R); \ return 1; \ @@ -1246,7 +1250,7 @@ static struct ixgbe_reg_test reg_test_82598[] = { static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data) { - struct ixgbe_reg_test *test; + const struct ixgbe_reg_test *test; u32 value, before, after; u32 i, toggle; diff --git a/drivers/net/ixgbevf/ethtool.c b/drivers/net/ixgbevf/ethtool.c index 4cc817acfb6..fa29b3c8c46 100644 --- a/drivers/net/ixgbevf/ethtool.c +++ b/drivers/net/ixgbevf/ethtool.c @@ -544,7 +544,7 @@ struct ixgbevf_reg_test { #define TABLE64_TEST_HI 6 /* default VF register test */ -static struct ixgbevf_reg_test reg_test_vf[] = { +static const struct ixgbevf_reg_test reg_test_vf[] = { { IXGBE_VFRDBAL(0), 2, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 }, { IXGBE_VFRDBAH(0), 2, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, { IXGBE_VFRDLEN(0), 2, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, @@ -557,19 +557,23 @@ static struct ixgbevf_reg_test reg_test_vf[] = { { 0, 0, 0, 0 } }; +static const u32 register_test_patterns[] = { + 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF +}; + #define REG_PATTERN_TEST(R, M, W) \ { \ u32 pat, val, before; \ - const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \ - for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { \ + for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) { \ before = readl(adapter->hw.hw_addr + R); \ - writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \ + writel((register_test_patterns[pat] & W), \ + (adapter->hw.hw_addr + R)); \ val = readl(adapter->hw.hw_addr + R); \ - if (val != (_test[pat] & W & M)) { \ + if (val != (register_test_patterns[pat] & W & M)) { \ hw_dbg(&adapter->hw, \ "pattern test reg %04X failed: got " \ "0x%08X expected 0x%08X\n", \ - R, val, (_test[pat] & W & M)); \ + R, val, (register_test_patterns[pat] & W & M)); \ *data = R; \ writel(before, adapter->hw.hw_addr + R); \ return 1; \ @@ -596,7 +600,7 @@ static struct ixgbevf_reg_test reg_test_vf[] = { static int ixgbevf_reg_test(struct ixgbevf_adapter *adapter, u64 *data) { - struct ixgbevf_reg_test *test; + const struct ixgbevf_reg_test *test; u32 i; test = reg_test_vf; |