[SCSI] 53c7xx: kill driver

It's been more than enough time now to try to get the new m68k drivers
into the tree.  Let's remove the old ones and we can remerge the new
glue once it's ready.  Given that there are patches to rename two out
of the three drivers in m68k CVS and all of them need a lot of
codingstyle love anyway that's probably the better strategy to begin
with.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kars de Jong <jongk@linux-m68k.org>
Cc: linux-m68k@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 files changed, 1 insertions, 12651 deletions

diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c
deleted file mode 100644
index 93b41f45638..00000000000
--- a/drivers/scsi/53c7xx.c
+++ /dev/null
@@ -1,6102 +0,0 @@
-/*
- * 53c710 driver.  Modified from Drew Eckhardts driver
- * for 53c810 by Richard Hirst [richard@sleepie.demon.co.uk]
- * Check out PERM_OPTIONS and EXPECTED_CLOCK, which may be defined in the
- * relevant machine specific file (eg. mvme16x.[ch], amiga7xx.[ch]).
- * There are also currently some defines at the top of 53c7xx.scr.
- * The chip type is #defined in script_asm.pl, as well as the Makefile.
- * Host scsi ID expected to be 7 - see NCR53c7x0_init().
- *
- * I have removed the PCI code and some of the 53c8xx specific code - 
- * simply to make this file smaller and easier to manage.
- *
- * MVME16x issues:
- *   Problems trying to read any chip registers in NCR53c7x0_init(), as they
- *   may never have been set by 16xBug (eg. If kernel has come in over tftp).
- */
-
-/*
- * Adapted for Linux/m68k Amiga platforms for the A4000T/A4091 and
- * WarpEngine SCSI controllers.
- * By Alan Hourihane <alanh@fairlite.demon.co.uk>
- * Thanks to Richard Hirst for making it possible with the MVME additions
- */
-
-/*
- * 53c710 rev 0 doesn't support add with carry.  Rev 1 and 2 does.  To
- * overcome this problem you can define FORCE_DSA_ALIGNMENT, which ensures
- * that the DSA address is always xxxxxx00.  If disconnection is not allowed,
- * then the script only ever tries to add small (< 256) positive offsets to
- * DSA, so lack of carry isn't a problem.  FORCE_DSA_ALIGNMENT can, of course,
- * be defined for all chip revisions at a small cost in memory usage.
- */
-
-#define FORCE_DSA_ALIGNMENT
-
-/*
- * Selection timer does not always work on the 53c710, depending on the
- * timing at the last disconnect, if this is a problem for you, try
- * using validids as detailed below.
- *
- * Options for the NCR7xx driver
- *
- * noasync:0		-	disables sync and asynchronous negotiation
- * nosync:0		-	disables synchronous negotiation (does async)
- * nodisconnect:0	-	disables disconnection
- * validids:0x??	-	Bitmask field that disallows certain ID's.
- *			-	e.g.	0x03	allows ID 0,1
- *			-		0x1F	allows ID 0,1,2,3,4
- * opthi:n		-	replace top word of options with 'n'
- * optlo:n		-	replace bottom word of options with 'n'
- *			-	ALWAYS SPECIFY opthi THEN optlo <<<<<<<<<<
- */
-
-/*
- * PERM_OPTIONS are driver options which will be enabled for all NCR boards
- * in the system at driver initialization time.
- *
- * Don't THINK about touching these in PERM_OPTIONS : 
- *   OPTION_MEMORY_MAPPED 
- * 	680x0 doesn't have an IO map!
- *
- *   OPTION_DEBUG_TEST1
- *	Test 1 does bus mastering and interrupt tests, which will help weed 
- *	out brain damaged main boards.
- *
- * Other PERM_OPTIONS settings are listed below.  Note the actual options
- * required are set in the relevant file (mvme16x.c, amiga7xx.c, etc):
- *
- *   OPTION_NO_ASYNC
- *	Don't negotiate for asynchronous transfers on the first command 
- *	when OPTION_ALWAYS_SYNCHRONOUS is set.  Useful for dain bramaged
- *	devices which do something bad rather than sending a MESSAGE 
- *	REJECT back to us like they should if they can't cope.
- *
- *   OPTION_SYNCHRONOUS
- *	Enable support for synchronous transfers.  Target negotiated 
- *	synchronous transfers will be responded to.  To initiate 
- *	a synchronous transfer request,  call 
- *
- *	    request_synchronous (hostno, target) 
- *
- *	from within KGDB.
- *
- *   OPTION_ALWAYS_SYNCHRONOUS
- *	Negotiate for synchronous transfers with every target after
- *	driver initialization or a SCSI bus reset.  This is a bit dangerous, 
- *	since there are some dain bramaged SCSI devices which will accept
- *	SDTR messages but keep talking asynchronously.
- *
- *   OPTION_DISCONNECT
- *	Enable support for disconnect/reconnect.  To change the 
- *	default setting on a given host adapter, call
- *
- *	    request_disconnect (hostno, allow)
- *
- *	where allow is non-zero to allow, 0 to disallow.
- * 
- *  If you really want to run 10MHz FAST SCSI-II transfers, you should 
- *  know that the NCR driver currently ignores parity information.  Most
- *  systems do 5MHz SCSI fine.  I've seen a lot that have problems faster
- *  than 8MHz.  To play it safe, we only request 5MHz transfers.
- *
- *  If you'd rather get 10MHz transfers, edit sdtr_message and change 
- *  the fourth byte from 50 to 25.
- */
-
-/*
- * Sponsored by 
- *	iX Multiuser Multitasking Magazine
- *	Hannover, Germany
- *	hm@ix.de
- *
- * Copyright 1993, 1994, 1995 Drew Eckhardt
- *      Visionary Computing 
- *      (Unix and Linux consulting and custom programming)
- *      drew@PoohSticks.ORG
- *	+1 (303) 786-7975
- *
- * TolerANT and SCSI SCRIPTS are registered trademarks of NCR Corporation.
- * 
- * For more information, please consult 
- *
- * NCR53C810 
- * SCSI I/O Processor
- * Programmer's Guide
- *
- * NCR 53C810
- * PCI-SCSI I/O Processor
- * Data Manual
- *
- * NCR 53C810/53C820
- * PCI-SCSI I/O Processor Design In Guide
- *
- * For literature on Symbios Logic Inc. formerly NCR, SCSI, 
- * and Communication products please call (800) 334-5454 or
- * (719) 536-3300. 
- * 
- * PCI BIOS Specification Revision
- * PCI Local Bus Specification
- * PCI System Design Guide
- *
- * PCI Special Interest Group
- * M/S HF3-15A
- * 5200 N.E. Elam Young Parkway
- * Hillsboro, Oregon 97124-6497
- * +1 (503) 696-2000 
- * +1 (800) 433-5177
- */
-
-/*
- * Design issues : 
- * The cumulative latency needed to propagate a read/write request 
- * through the file system, buffer cache, driver stacks, SCSI host, and 
- * SCSI device is ultimately the limiting factor in throughput once we 
- * have a sufficiently fast host adapter.
- *  
- * So, to maximize performance we want to keep the ratio of latency to data 
- * transfer time to a minimum by
- * 1.  Minimizing the total number of commands sent (typical command latency
- *	including drive and bus mastering host overhead is as high as 4.5ms)
- *	to transfer a given amount of data.  
- *
- *      This is accomplished by placing no arbitrary limit on the number
- *	of scatter/gather buffers supported, since we can transfer 1K
- *	per scatter/gather buffer without Eric's cluster patches, 
- *	4K with.  
- *
- * 2.  Minimizing the number of fatal interrupts serviced, since
- * 	fatal interrupts halt the SCSI I/O processor.  Basically,
- *	this means offloading the practical maximum amount of processing 
- *	to the SCSI chip.
- * 
- *	On the NCR53c810/820/720,  this is accomplished by using 
- *		interrupt-on-the-fly signals when commands complete, 
- *		and only handling fatal errors and SDTR / WDTR 	messages 
- *		in the host code.
- *
- *	On the NCR53c710, interrupts are generated as on the NCR53c8x0,
- *		only the lack of a interrupt-on-the-fly facility complicates
- *		things.   Also, SCSI ID registers and commands are 
- *		bit fielded rather than binary encoded.
- *		
- * 	On the NCR53c700 and NCR53c700-66, operations that are done via 
- *		indirect, table mode on the more advanced chips must be
- *	        replaced by calls through a jump table which 
- *		acts as a surrogate for the DSA.  Unfortunately, this 
- * 		will mean that we must service an interrupt for each 
- *		disconnect/reconnect.
- * 
- * 3.  Eliminating latency by pipelining operations at the different levels.
- * 	
- *	This driver allows a configurable number of commands to be enqueued
- *	for each target/lun combination (experimentally, I have discovered
- *	that two seems to work best) and will ultimately allow for 
- *	SCSI-II tagged queuing.
- * 	
- *
- * Architecture : 
- * This driver is built around a Linux queue of commands waiting to 
- * be executed, and a shared Linux/NCR array of commands to start.  Commands
- * are transferred to the array  by the run_process_issue_queue() function 
- * which is called whenever a command completes.
- *
- * As commands are completed, the interrupt routine is triggered,
- * looks for commands in the linked list of completed commands with
- * valid status, removes these commands from a list of running commands, 
- * calls the done routine, and flags their target/luns as not busy.
- *
- * Due to limitations in the intelligence of the NCR chips, certain
- * concessions are made.  In many cases, it is easier to dynamically 
- * generate/fix-up code rather than calculate on the NCR at run time.  
- * So, code is generated or fixed up for
- *
- * - Handling data transfers, using a variable number of MOVE instructions
- *	interspersed with CALL MSG_IN, WHEN MSGIN instructions.
- *
- * 	The DATAIN and DATAOUT routines	are separate, so that an incorrect
- *	direction can be trapped, and space isn't wasted. 
- *
- *	It may turn out that we're better off using some sort 
- *	of table indirect instruction in a loop with a variable
- *	sized table on the NCR53c710 and newer chips.
- *
- * - Checking for reselection (NCR53c710 and better)
- *
- * - Handling the details of SCSI context switches (NCR53c710 and better),
- *	such as reprogramming appropriate synchronous parameters, 
- *	removing the dsa structure from the NCR's queue of outstanding
- *	commands, etc.
- *
- */
-
-#include <linux/module.h>
-
-
-#include <linux/types.h>
-#include <asm/setup.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <linux/delay.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/time.h>
-#include <linux/blkdev.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <asm/pgtable.h>
-
-#ifdef CONFIG_AMIGA
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/irq.h>
-
-#define BIG_ENDIAN
-#define NO_IO_SPACE
-#endif
-
-#ifdef CONFIG_MVME16x
-#include <asm/mvme16xhw.h>
-
-#define BIG_ENDIAN
-#define NO_IO_SPACE
-#define VALID_IDS
-#endif
-
-#ifdef CONFIG_BVME6000
-#include <asm/bvme6000hw.h>
-
-#define BIG_ENDIAN
-#define NO_IO_SPACE
-#define VALID_IDS
-#endif
-
-#include "scsi.h"
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_transport_spi.h>
-#include "53c7xx.h"
-#include <linux/stat.h>
-#include <linux/stddef.h>
-
-#ifdef NO_IO_SPACE
-/*
- * The following make the definitions in 53c7xx.h (write8, etc) smaller,
- * we don't have separate i/o space anyway.
- */
-#undef inb
-#undef outb
-#undef inw
-#undef outw
-#undef inl
-#undef outl
-#define inb(x)          1
-#define inw(x)          1
-#define inl(x)          1
-#define outb(x,y)       1
-#define outw(x,y)       1
-#define outl(x,y)       1
-#endif
-
-static int check_address (unsigned long addr, int size);
-static void dump_events (struct Scsi_Host *host, int count);
-static Scsi_Cmnd * return_outstanding_commands (struct Scsi_Host *host, 
-    int free, int issue);
-static void hard_reset (struct Scsi_Host *host);
-static void ncr_scsi_reset (struct Scsi_Host *host);
-static void print_lots (struct Scsi_Host *host);
-static void set_synchronous (struct Scsi_Host *host, int target, int sxfer, 
-    int scntl3, int now_connected);
-static int datapath_residual (struct Scsi_Host *host);
-static const char * sbcl_to_phase (int sbcl);
-static void print_progress (Scsi_Cmnd *cmd);
-static void print_queues (struct Scsi_Host *host);
-static void process_issue_queue (unsigned long flags);
-static int shutdown (struct Scsi_Host *host);
-static void abnormal_finished (struct NCR53c7x0_cmd *cmd, int result);
-static int disable (struct Scsi_Host *host);
-static int NCR53c7xx_run_tests (struct Scsi_Host *host);
-static irqreturn_t NCR53c7x0_intr(int irq, void *dev_id);
-static void NCR53c7x0_intfly (struct Scsi_Host *host);
-static int ncr_halt (struct Scsi_Host *host);
-static void intr_phase_mismatch (struct Scsi_Host *host, struct NCR53c7x0_cmd 
-    *cmd);
-static void intr_dma (struct Scsi_Host *host, struct NCR53c7x0_cmd *cmd);
-static void print_dsa (struct Scsi_Host *host, u32 *dsa,
-    const char *prefix);
-static int print_insn (struct Scsi_Host *host, const u32 *insn,
-    const char *prefix, int kernel);
-
-static void NCR53c7xx_dsa_fixup (struct NCR53c7x0_cmd *cmd);
-static void NCR53c7x0_init_fixup (struct Scsi_Host *host);
-static int NCR53c7x0_dstat_sir_intr (struct Scsi_Host *host, struct 
-    NCR53c7x0_cmd *cmd);
-static void NCR53c7x0_soft_reset (struct Scsi_Host *host);
-
-/* Size of event list (per host adapter) */
-static int track_events = 0;
-static struct Scsi_Host *first_host = NULL;	/* Head of list of NCR boards */
-static struct scsi_host_template *the_template = NULL;
-
-/* NCR53c710 script handling code */
-
-#include "53c7xx_d.h"
-#ifdef A_int_debug_sync
-#define DEBUG_SYNC_INTR A_int_debug_sync
-#endif
-int NCR53c7xx_script_len = sizeof (SCRIPT);
-int NCR53c7xx_dsa_len = A_dsa_end + Ent_dsa_zero - Ent_dsa_code_template;
-#ifdef FORCE_DSA_ALIGNMENT
-int CmdPageStart = (0 - Ent_dsa_zero - sizeof(struct NCR53c7x0_cmd)) & 0xff;
-#endif
-
-static char *setup_strings[] =
-	{"","","","","","","",""};
-
-#define MAX_SETUP_STRINGS ARRAY_SIZE(setup_strings)
-#define SETUP_BUFFER_SIZE 200
-static char setup_buffer[SETUP_BUFFER_SIZE];
-static char setup_used[MAX_SETUP_STRINGS];
-
-void ncr53c7xx_setup (char *str, int *ints)
-{
-   int i;
-   char *p1, *p2;
-
-   p1 = setup_buffer;
-   *p1 = '\0';
-   if (str)
-      strncpy(p1, str, SETUP_BUFFER_SIZE - strlen(setup_buffer));
-   setup_buffer[SETUP_BUFFER_SIZE - 1] = '\0';
-   p1 = setup_buffer;
-   i = 0;
-   while (*p1 && (i < MAX_SETUP_STRINGS)) {
-      p2 = strchr(p1, ',');
-      if (p2) {
-         *p2 = '\0';
-         if (p1 != p2)
-            setup_strings[i] = p1;
-         p1 = p2 + 1;
-         i++;
-         }
-      else {
-         setup_strings[i] = p1;
-         break;
-         }
-      }
-   for (i=0; i<MAX_SETUP_STRINGS; i++)
-      setup_used[i] = 0;
-}
-
-
-/* check_setup_strings() returns index if key found, 0 if not
- */
-
-static int check_setup_strings(char *key, int *flags, int *val, char *buf)
-{
-int x;
-char *cp;
-
-   for  (x=0; x<MAX_SETUP_STRINGS; x++) {
-      if (setup_used[x])
-         continue;
-      if (!strncmp(setup_strings[x], key, strlen(key)))
-         break;
-      if (!strncmp(setup_strings[x], "next", strlen("next")))
-         return 0;
-      }
-   if (x == MAX_SETUP_STRINGS)
-      return 0;
-   setup_used[x] = 1;
-   cp = setup_strings[x] + strlen(key);
-   *val = -1;
-   if (*cp != ':')
-      return ++x;
-   cp++;
-   if ((*cp >= '0') && (*cp <= '9')) {
-      *val = simple_strtoul(cp,NULL,0);
-      }
-   return ++x;
-}
-
-
-
-/*
- * KNOWN BUGS :
- * - There is some sort of conflict when the PPP driver is compiled with 
- * 	support for 16 channels?
- * 
- * - On systems which predate the 1.3.x initialization order change,
- *      the NCR driver will cause Cannot get free page messages to appear.  
- *      These are harmless, but I don't know of an easy way to avoid them.
- *
- * - With OPTION_DISCONNECT, on two systems under unknown circumstances,
- *	we get a PHASE MISMATCH with DSA set to zero (suggests that we 
- *	are occurring somewhere in the reselection code) where 
- *	DSP=some value DCMD|DBC=same value.  
- * 	
- *	Closer inspection suggests that we may be trying to execute
- *	some portion of the DSA?
- * scsi0 : handling residual transfer (+ 0 bytes from DMA FIFO)
- * scsi0 : handling residual transfer (+ 0 bytes from DMA FIFO)
- * scsi0 : no current command : unexpected phase MSGIN.
- *         DSP=0x1c46cc, DCMD|DBC=0x1c46ac, DSA=0x0
- *         DSPS=0x0, TEMP=0x1c3e70, DMODE=0x80
- * scsi0 : DSP->
- * 001c46cc : 0x001c46cc 0x00000000
- * 001c46d4 : 0x001c5ea0 0x000011f8
- *
- *	Changed the print code in the phase_mismatch handler so
- *	that we call print_lots to try to diagnose this.
- *
- */
-
-/* 
- * Possible future direction of architecture for max performance :
- *
- * We're using a single start array for the NCR chip.  This is 
- * sub-optimal, because we cannot add a command which would conflict with 
- * an executing command to this start queue, and therefore must insert the 
- * next command for a given I/T/L combination after the first has completed;
- * incurring our interrupt latency between SCSI commands.
- *
- * To allow further pipelining of the NCR and host CPU operation, we want 
- * to set things up so that immediately on termination of a command destined 
- * for a given LUN, we get that LUN busy again.  
- * 
- * To do this, we need to add a 32 bit pointer to which is jumped to 
- * on completion of a command.  If no new command is available, this 
- * would point to the usual DSA issue queue select routine.
- *
- * If one were, it would point to a per-NCR53c7x0_cmd select routine 
- * which starts execution immediately, inserting the command at the head 
- * of the start queue if the NCR chip is selected or reselected.
- *
- * We would change so that we keep a list of outstanding commands 
- * for each unit, rather than a single running_list.  We'd insert 
- * a new command into the right running list; if the NCR didn't 
- * have something running for that yet, we'd put it in the 
- * start queue as well.  Some magic needs to happen to handle the 
- * race condition between the first command terminating before the 
- * new one is written.
- *
- * Potential for profiling : 
- * Call do_gettimeofday(struct timeval *tv) to get 800ns resolution.
- */
-
-
-/*
- * TODO : 
- * 1.  To support WIDE transfers, not much needs to happen.  We
- *	should do CHMOVE instructions instead of MOVEs when
- *	we have scatter/gather segments of uneven length.  When
- * 	we do this, we need to handle the case where we disconnect
- *	between segments.
- * 
- * 2.  Currently, when Icky things happen we do a FATAL().  Instead,
- *     we want to do an integrity check on the parts of the NCR hostdata
- *     structure which were initialized at boot time; FATAL() if that 
- *     fails, and otherwise try to recover.  Keep track of how many
- *     times this has happened within a single SCSI command; if it 
- *     gets excessive, then FATAL().
- *
- * 3.  Parity checking is currently disabled, and a few things should 
- *     happen here now that we support synchronous SCSI transfers :
- *     1.  On soft-reset, we shoould set the EPC (Enable Parity Checking)
- *	   and AAP (Assert SATN/ on parity error) bits in SCNTL0.
- *	
- *     2.  We should enable the parity interrupt in the SIEN0 register.
- * 
- *     3.  intr_phase_mismatch() needs to believe that message out is 
- *	   always an "acceptable" phase to have a mismatch in.  If 
- *	   the old phase was MSG_IN, we should send a MESSAGE PARITY 
- *	   error.  If the old phase was something else, we should send
- *	   a INITIATOR_DETECTED_ERROR message.  Note that this could
- *	   cause a RESTORE POINTERS message; so we should handle that 
- *	   correctly first.  Instead, we should probably do an 
- *	   initiator_abort.
- *
- * 4.  MPEE bit of CTEST4 should be set so we get interrupted if 
- *     we detect an error.
- *
- *  
- * 5.  The initial code has been tested on the NCR53c810.  I don't 
- *     have access to NCR53c700, 700-66 (Forex boards), NCR53c710
- *     (NCR Pentium systems), NCR53c720, NCR53c820, or NCR53c825 boards to 
- *     finish development on those platforms.
- *
- *     NCR53c820/825/720 - need to add wide transfer support, including WDTR 
- *     		negotiation, programming of wide transfer capabilities
- *		on reselection and table indirect selection.
- *
- *     NCR53c710 - need to add fatal interrupt or GEN code for 
- *		command completion signaling.   Need to modify all 
- *		SDID, SCID, etc. registers, and table indirect select code 
- *		since these use bit fielded (ie 1<<target) instead of 
- *		binary encoded target ids.  Need to accommodate
- *		different register mappings, probably scan through
- *		the SCRIPT code and change the non SFBR register operand
- *		of all MOVE instructions.
- *
- *		It is rather worse than this actually, the 710 corrupts
- *		both TEMP and DSA when you do a MOVE MEMORY.  This
- *		screws you up all over the place.  MOVE MEMORY 4 with a
- *		destination of DSA seems to work OK, which helps some.
- *		Richard Hirst  richard@sleepie.demon.co.uk
- * 
- *     NCR53c700/700-66 - need to add code to refix addresses on 
- *		every nexus change, eliminate all table indirect code,
- *		very messy.
- *
- * 6.  The NCR53c7x0 series is very popular on other platforms that 
- *     could be running Linux - ie, some high performance AMIGA SCSI 
- *     boards use it.  
- *	
- *     So, I should include #ifdef'd code so that it is 
- *     compatible with these systems.
- *	
- *     Specifically, the little Endian assumptions I made in my 
- *     bit fields need to change, and if the NCR doesn't see memory
- *     the right way, we need to provide options to reverse words
- *     when the scripts are relocated.
- *
- * 7.  Use vremap() to access memory mapped boards.  
- */
-
-/* 
- * Allow for simultaneous existence of multiple SCSI scripts so we 
- * can have a single driver binary for all of the family.
- *
- * - one for NCR53c700 and NCR53c700-66 chips	(not yet supported)
- * - one for rest (only the NCR53c810, 815, 820, and 825 are currently 
- *	supported)
- * 
- * So that we only need two SCSI scripts, we need to modify things so
- * that we fixup register accesses in READ/WRITE instructions, and 
- * we'll also have to accommodate the bit vs. binary encoding of IDs
- * with the 7xx chips.
- */
-
-#define ROUNDUP(adr,type)	\
-  ((void *) (((long) (adr) + sizeof(type) - 1) & ~(sizeof(type) - 1)))
-
-
-/*
- * Function: issue_to_cmd
- *
- * Purpose: convert jump instruction in issue array to NCR53c7x0_cmd
- *	structure pointer.  
- *
- * Inputs; issue - pointer to start of NOP or JUMP instruction
- *	in issue array.
- *
- * Returns: pointer to command on success; 0 if opcode is NOP.
- */
-
-static inline struct NCR53c7x0_cmd *
-issue_to_cmd (struct Scsi_Host *host, struct NCR53c7x0_hostdata *hostdata,
-    u32 *issue)
-{
-    return (issue[0] != hostdata->NOP_insn) ? 
-    /* 
-     * If the IF TRUE bit is set, it's a JUMP instruction.  The
-     * operand is a bus pointer to the dsa_begin routine for this DSA.  The
-     * dsa field of the NCR53c7x0_cmd structure starts with the 
-     * DSA code template.  By converting to a virtual address,
-     * subtracting the code template size, and offset of the 
-     * dsa field, we end up with a pointer to the start of the 
-     * structure (alternatively, we could use the 
-     * dsa_cmnd field, an anachronism from when we weren't
-     * sure what the relationship between the NCR structures
-     * and host structures were going to be.
-     */
-	(struct NCR53c7x0_cmd *) ((char *) bus_to_virt (issue[1]) - 
-	    (hostdata->E_dsa_code_begin - hostdata->E_dsa_code_template) -
-	    offsetof(struct NCR53c7x0_cmd, dsa)) 
-    /* If the IF TRUE bit is not set, it's a NOP */
-	: NULL;
-}
-
-
-/* 
- * FIXME: we should junk these, in favor of synchronous_want and 
- * wide_want in the NCR53c7x0_hostdata structure.
- */
-
-/* Template for "preferred" synchronous transfer parameters. */
-
-static const unsigned char sdtr_message[] = {
-#ifdef CONFIG_SCSI_NCR53C7xx_FAST
-    EXTENDED_MESSAGE, 3 /* length */, EXTENDED_SDTR, 25 /* *4ns */, 8 /* off */
-#else
-    EXTENDED_MESSAGE, 3 /* length */, EXTENDED_SDTR, 50 /* *4ns */, 8 /* off */ 
-#endif
-};
-
-/* Template to request asynchronous transfers */
-
-static const unsigned char async_message[] = {
-    EXTENDED_MESSAGE, 3 /* length */, EXTENDED_SDTR, 0, 0 /* asynchronous */
-};
-
-/* Template for "preferred" WIDE transfer parameters */
-
-static const unsigned char wdtr_message[] = {
-    EXTENDED_MESSAGE, 2 /* length */, EXTENDED_WDTR, 1 /* 2^1 bytes */
-};
-
-#if 0
-/*
- * Function : struct Scsi_Host *find_host (int host)
- * 
- * Purpose : KGDB support function which translates a host number 
- * 	to a host structure. 
- *
- * Inputs : host - number of SCSI host
- *
- * Returns : NULL on failure, pointer to host structure on success.
- */
-
-static struct Scsi_Host *
-find_host (int host) {
-    struct Scsi_Host *h;
-    for (h = first_host; h && h->host_no != host; h = h->next);
-    if (!h) {
-	printk (KERN_ALERT "scsi%d not found\n", host);
-	return NULL;
-    } else if (h->hostt != the_template) {
-	printk (KERN_ALERT "scsi%d is not a NCR board\n", host);
-	return NULL;
-    }
-    return h;
-}
-
-#if 0
-/*
- * Function : request_synchronous (int host, int target)
- * 
- * Purpose : KGDB interface which will allow us to negotiate for 
- * 	synchronous transfers.  This ill be replaced with a more 
- * 	integrated function; perhaps a new entry in the scsi_host 
- *	structure, accessible via an ioctl() or perhaps /proc/scsi.
- *
- * Inputs : host - number of SCSI host; target - number of target.
- *
- * Returns : 0 when negotiation has been setup for next SCSI command,
- *	-1 on failure.
- */
-
-static int
-request_synchronous (int host, int target) {
-    struct Scsi_Host *h;
-    struct NCR53c7x0_hostdata *hostdata;
-    unsigned long flags;
-    if (target < 0) {
-	printk (KERN_ALERT "target %d is bogus\n", target);
-	return -1;
-    }
-    if (!(h = find_host (host)))
-	return -1;
-    else if (h->this_id == target) {
-	printk (KERN_ALERT "target %d is host ID\n", target);
-	return -1;
-    } 
-    else if (target >= h->max_id) {
-	printk (KERN_ALERT "target %d exceeds maximum of %d\n", target,
-	    h->max_id);
-	return -1;
-    }
-    hostdata = (struct NCR53c7x0_hostdata *)h->hostdata[0];
-
-    local_irq_save(flags);
-    if (hostdata->initiate_sdtr & (1 << target)) {
-	local_irq_restore(flags);
-	printk (KERN_ALERT "target %d already doing SDTR\n", target);
-	return -1;
-    } 
-    hostdata->initiate_sdtr |= (1 << target);
-    local_irq_restore(flags);
-    return 0;
-}
-#endif
-
-/*
- * Function : request_disconnect (int host, int on_or_off)
- * 
- * Purpose : KGDB support function, tells us to allow or disallow 
- *	disconnections.
- *
- * Inputs : host - number of SCSI host; on_or_off - non-zero to allow,
- *	zero to disallow.
- *
- * Returns : 0 on success, *	-1 on failure.
- */
-
-static int 
-request_disconnect (int host, int on_or_off) {
-    struct Scsi_Host *h;
-    struct NCR53c7x0_hostdata *hostdata;
-    if (!(h = find_host (host)))
-	return -1;
-    hostdata = (struct NCR53c7x0_hostdata *) h->hostdata[0];
-    if (on_or_off) 
-	hostdata->options |= OPTION_DISCONNECT;
-    else
-	hostdata->options &= ~OPTION_DISCONNECT;
-    return 0;
-}
-#endif
-
-/*
- * Function : static void NCR53c7x0_driver_init (struct Scsi_Host *host)
- *
- * Purpose : Initialize internal structures, as required on startup, or 
- *	after a SCSI bus reset.
- * 
- * Inputs : host - pointer to this host adapter's structure
- */
-
-static void 
-NCR53c7x0_driver_init (struct Scsi_Host *host) {
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    int i, j;
-    u32 *ncrcurrent;
-
-    for (i = 0; i < 16; ++i) {
-	hostdata->request_sense[i] = 0;
-    	for (j = 0; j < 8; ++j) 
-	    hostdata->busy[i][j] = 0;
-	set_synchronous (host, i, /* sxfer */ 0, hostdata->saved_scntl3, 0);
-    }
-    hostdata->issue_queue = NULL;
-    hostdata->running_list = hostdata->finished_queue = 
-	hostdata->ncrcurrent = NULL;
-    for (i = 0, ncrcurrent = (u32 *) hostdata->schedule; 
-	i < host->can_queue; ++i, ncrcurrent += 2) {
-	ncrcurrent[0] = hostdata->NOP_insn;
-	ncrcurrent[1] = 0xdeadbeef;
-    }
-    ncrcurrent[0] = ((DCMD_TYPE_TCI|DCMD_TCI_OP_JUMP) << 24) | DBC_TCI_TRUE;
-    ncrcurrent[1] = (u32) virt_to_bus (hostdata->script) +
-	hostdata->E_wait_reselect;
-    hostdata->reconnect_dsa_head = 0;
-    hostdata->addr_reconnect_dsa_head = (u32) 
-	virt_to_bus((void *) &(hostdata->reconnect_dsa_head));
-    hostdata->expecting_iid = 0;
-    hostdata->expecting_sto = 0;
-    if (hostdata->options & OPTION_ALWAYS_SYNCHRONOUS) 
-	hostdata->initiate_sdtr = 0xffff; 
-    else
-    	hostdata->initiate_sdtr = 0;
-    hostdata->talked_to = 0;
-    hostdata->idle = 1;
-}
-
-/* 
- * Function : static int clock_to_ccf_710 (int clock)
- *
- * Purpose :  Return the clock conversion factor for a given SCSI clock.
- *
- * Inputs : clock - SCSI clock expressed in Hz.
- *
- * Returns : ccf on success, -1 on failure.
- */
-
-static int 
-clock_to_ccf_710 (int clock) {
-    if (clock <= 16666666)
-	return -1;
-    if (clock <= 25000000)
-	return 2; 	/* Divide by 1.0 */
-    else if (clock <= 37500000)
-	return 1; 	/* Divide by 1.5 */
-    else if (clock <= 50000000)
-	return 0;	/* Divide by 2.0 */
-    else if (clock <= 66000000)
-	return 3;	/* Divide by 3.0 */
-    else 
-	return -1;
-}
-    
-/* 
- * Function : static int NCR53c7x0_init (struct Scsi_Host *host)
- *
- * Purpose :  initialize the internal structures for a given SCSI host
- *
- * Inputs : host - pointer to this host adapter's structure
- *
- * Preconditions : when this function is called, the chip_type 
- * 	field of the hostdata structure MUST have been set.
- *
- * Returns : 0 on success, -1 on failure.
- */
-
-int 
-NCR53c7x0_init (struct Scsi_Host *host) {
-    NCR53c7x0_local_declare();
-    int i, ccf;
-    unsigned char revision;
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    /* 
-     * There are some things which we need to know about in order to provide
-     * a semblance of support.  Print 'em if they aren't what we expect, 
-     * otherwise don't add to the noise.
-     * 
-     * -1 means we don't know what to expect.
-     */
-    int val, flags;
-    char buf[32];
-    int expected_id = -1;
-    int expected_clock = -1;
-    int uninitialized = 0;
-#ifdef NO_IO_SPACE
-    int expected_mapping = OPTION_MEMORY_MAPPED;
-#else
-    int expected_mapping = OPTION_IO_MAPPED;
-#endif
-    for (i=0;i<7;i++)
-	hostdata->valid_ids[i] = 1;	/* Default all ID's to scan */
-
-    /* Parse commandline flags */
-    if (check_setup_strings("noasync",&flags,&val,buf))
-    {
-	hostdata->options |= OPTION_NO_ASYNC;
-	hostdata->options &= ~(OPTION_SYNCHRONOUS | OPTION_ALWAYS_SYNCHRONOUS);
-    }
-
-    if (check_setup_strings("nosync",&flags,&val,buf))
-    {
-	hostdata->options &= ~(OPTION_SYNCHRONOUS | OPTION_ALWAYS_SYNCHRONOUS);
-    }
-
-    if (check_setup_strings("nodisconnect",&flags,&val,buf))
-	hostdata->options &= ~OPTION_DISCONNECT;
-
-    if (check_setup_strings("validids",&flags,&val,buf))
-    {
-	for (i=0;i<7;i++) 
-		hostdata->valid_ids[i] = val & (1<<i);
-    }
- 
-    if  ((i = check_setup_strings("next",&flags,&val,buf)))
-    {
-	while (i)
-		setup_used[--i] = 1;
-    }
-
-    if (check_setup_strings("opthi",&flags,&val,buf))
-	hostdata->options = (long long)val << 32;
-    if (check_setup_strings("optlo",&flags,&val,buf))
-	hostdata->options |= val;
-
-    NCR53c7x0_local_setup(host);
-    switch (hostdata->chip) {
-    case 710:
-    case 770:
-    	hostdata->dstat_sir_intr = NCR53c7x0_dstat_sir_intr;
-    	hostdata->init_save_regs = NULL;
-    	hostdata->dsa_fixup = NCR53c7xx_dsa_fixup;
-    	hostdata->init_fixup = NCR53c7x0_init_fixup;
-    	hostdata->soft_reset = NCR53c7x0_soft_reset;
-	hostdata->run_tests = NCR53c7xx_run_tests;
-	expected_clock = hostdata->scsi_clock;
-	expected_id = 7;
-    	break;
-    default:
-	printk ("scsi%d : chip type of %d is not supported yet, detaching.\n",
-	    host->host_no, hostdata->chip);
-	scsi_unregister (host);
-	return -1;
-    }
-
-    /* Assign constants accessed by NCR */
-    hostdata->NCR53c7xx_zero = 0;			
-    hostdata->NCR53c7xx_msg_reject = MESSAGE_REJECT;
-    hostdata->NCR53c7xx_msg_abort = ABORT;
-    hostdata->NCR53c7xx_msg_nop = NOP;
-    hostdata->NOP_insn = (DCMD_TYPE_TCI|DCMD_TCI_OP_JUMP) << 24;
-    if (expected_mapping == -1 || 
-	(hostdata->options & (OPTION_MEMORY_MAPPED)) != 
-	(expected_mapping & OPTION_MEMORY_MAPPED))
-	printk ("scsi%d : using %s mapped access\n", host->host_no, 
-	    (hostdata->options & OPTION_MEMORY_MAPPED) ? "memory" : 
-	    "io");
-
-    hostdata->dmode = (hostdata->chip == 700 || hostdata->chip == 70066) ? 
-	DMODE_REG_00 : DMODE_REG_10;
-    hostdata->istat = ((hostdata->chip / 100) == 8) ? 
-    	ISTAT_REG_800 : ISTAT_REG_700;
-
-/* We have to assume that this may be the first access to the chip, so
- * we must set EA in DCNTL. */
-
-    NCR53c7x0_write8 (DCNTL_REG, DCNTL_10_EA|DCNTL_10_COM);
-
-
-/* Only the ISTAT register is readable when the NCR is running, so make 
-   sure it's halted. */
-    ncr_halt(host);
-
-/* 
- * XXX - the NCR53c700 uses bitfielded registers for SCID, SDID, etc,
- *	as does the 710 with one bit per SCSI ID.  Conversely, the NCR
- * 	uses a normal, 3 bit binary representation of these values.
- *
- * Get the rest of the NCR documentation, and FIND OUT where the change
- * was.
- */
-
-#if 0
-	/* May not be able to do this - chip my not have been set up yet */
-	tmp = hostdata->this_id_mask = NCR53c7x0_read8(SCID_REG);
-	for (host->this_id = 0; tmp != 1; tmp >>=1, ++host->this_id);
-#else
-	host->this_id = 7;
-#endif
-
-/*
- * Note : we should never encounter a board setup for ID0.  So,
- * 	if we see ID0, assume that it was uninitialized and set it
- * 	to the industry standard 7.
- */
-    if (!host->this_id) {
-	printk("scsi%d : initiator ID was %d, changing to 7\n",
-	    host->host_no, host->this_id);
-	host->this_id = 7;
-	hostdata->this_id_mask = 1 << 7;
-	uninitialized = 1;
-    };
-
-    if (expected_id == -1 || host->this_id != expected_id)
-    	printk("scsi%d : using initiator ID %d\n", host->host_no,
-    	    host->this_id);
-
-    /*
-     * Save important registers to allow a soft reset.
-     */
-
-    /*
-     * CTEST7 controls cache snooping, burst mode, and support for 
-     * external differential drivers.  This isn't currently used - the
-     * default value may not be optimal anyway.
-     * Even worse, it may never have been set up since reset.
-     */
-    hostdata->saved_ctest7 = NCR53c7x0_read8(CTEST7_REG) & CTEST7_SAVE;
-    revision = (NCR53c7x0_read8(CTEST8_REG) & 0xF0) >> 4;
-    switch (revision) {
-	case 1: revision = 0;    break;
-	case 2: revision = 1;    break;
-	case 4: revision = 2;    break;
-	case 8: revision = 3;    break;
-	default: revision = 255; break;
-    }
-    printk("scsi%d: Revision 0x%x\n",host->host_no,revision);
-
-    if ((revision == 0 || revision == 255) && (hostdata->options & (OPTION_SYNCHRONOUS|OPTION_DISCONNECT|OPTION_ALWAYS_SYNCHRONOUS)))
-    {
-	printk ("scsi%d: Disabling sync working and disconnect/reselect\n",
-							host->host_no);
-	hostdata->options &= ~(OPTION_SYNCHRONOUS|OPTION_DISCONNECT|OPTION_ALWAYS_SYNCHRONOUS);
-    }
-
-    /*
-     * On NCR53c700 series chips, DCNTL controls the SCSI clock divisor,
-     * on 800 series chips, it allows for a totem-pole IRQ driver.
-     * NOTE saved_dcntl currently overwritten in init function.
-     * The value read here may be garbage anyway, MVME16x board at least
-     * does not initialise chip if kernel arrived via tftp.
-     */
-
-    hostdata->saved_dcntl = NCR53c7x0_read8(DCNTL_REG);
-
-    /*
-     * DMODE controls DMA burst length, and on 700 series chips,
-     * 286 mode and bus width  
-     * NOTE:  On MVME16x, chip may have been reset, so this could be a
-     * power-on/reset default value.
-     */
-    hostdata->saved_dmode = NCR53c7x0_read8(hostdata->dmode);
-
-    /* 
-     * Now that burst length and enabled/disabled status is known, 
-     * clue the user in on it.  
-     */
-   
-    ccf = clock_to_ccf_710 (expected_clock);
-
-    for (i = 0; i < 16; ++i) 
-	hostdata->cmd_allocated[i] = 0;
-
-    if (hostdata->init_save_regs)
-    	hostdata->init_save_regs (host);
-    if (hostdata->init_fixup)
-    	hostdata->init_fixup (host);
-
-    if (!the_template) {
-	the_template = host->hostt;
-	first_host = host;
-    }
-
-    /* 
-     * Linux SCSI drivers have always been plagued with initialization 
-     * problems - some didn't work with the BIOS disabled since they expected
-     * initialization from it, some didn't work when the networking code
-     * was enabled and registers got scrambled, etc.
-     *
-     * To avoid problems like this, in the future, we will do a soft 
-     * reset on the SCSI chip, taking it back to a sane state.
-     */
-
-    hostdata->soft_reset (host);
-
-#if 1
-    hostdata->debug_count_limit = -1;
-#else
-    hostdata->debug_count_limit = 1;
-#endif
-    hostdata->intrs = -1;
-    hostdata->resets = -1;
-    memcpy ((void *) hostdata->synchronous_want, (void *) sdtr_message, 
-	sizeof (hostdata->synchronous_want));
-
-    NCR53c7x0_driver_init (host);
-
-    if (request_irq(host->irq, NCR53c7x0_intr, IRQF_SHARED, "53c7xx", host))
-    {
-	printk("scsi%d : IRQ%d not free, detaching\n",
-		host->host_no, host->irq);
-	goto err_unregister;
-    } 
-
-    if ((hostdata->run_tests && hostdata->run_tests(host) == -1) ||
-        (hostdata->options & OPTION_DEBUG_TESTS_ONLY)) {
-    	/* XXX Should disable interrupts, etc. here */
-	goto err_free_irq;
-    } else {
-	if (host->io_port)  {
-	    host->n_io_port = 128;
-	    if (!request_region (host->io_port, host->n_io_port, "ncr53c7xx"))
-		goto err_free_irq;
-	}
-    }
-    
-    if (NCR53c7x0_read8 (SBCL_REG) & SBCL_BSY) {
-	printk ("scsi%d : bus wedge, doing SCSI reset\n", host->host_no);
-	hard_reset (host);
-    }
-    return 0;
-
- err_free_irq:
-    free_irq(host->irq,  NCR53c7x0_intr);
- err_unregister:
-    scsi_unregister(host);
-    return -1;
-}
-
-/* 
- * Function : int ncr53c7xx_init(struct scsi_host_template *tpnt, int board, int chip,
- *	unsigned long base, int io_port, int irq, int dma, long long options,
- *	int clock);
- *
- * Purpose : initializes a NCR53c7,8x0 based on base addresses,
- *	IRQ, and DMA channel.	
- *	
- * Inputs : tpnt - Template for this SCSI adapter, board - board level
- *	product, chip - 710
- * 
- * Returns : 0 on success, -1 on failure.
- *
- */
-
-int 
-ncr53c7xx_init (struct scsi_host_template *tpnt, int board, int chip,
-    unsigned long base, int io_port, int irq, int dma, 
-    long long options, int clock)
-{
-    struct Scsi_Host *instance;
-    struct NCR53c7x0_hostdata *hostdata;
-    char chip_str[80];
-    int script_len = 0, dsa_len = 0, size = 0, max_cmd_size = 0,
-	schedule_size = 0, ok = 0;
-    void *tmp;
-    unsigned long page;
-
-    switch (chip) {
-    case 710:
-    case 770:
-	schedule_size = (tpnt->can_queue + 1) * 8 /* JUMP instruction size */;
-	script_len = NCR53c7xx_script_len;
-    	dsa_len = NCR53c7xx_dsa_len;
-    	options |= OPTION_INTFLY;
-    	sprintf (chip_str, "NCR53c%d", chip);
-    	break;
-    default:
-    	printk("scsi-ncr53c7xx : unsupported SCSI chip %d\n", chip);
-    	return -1;
-    }
-
-    printk("scsi-ncr53c7xx : %s at memory 0x%lx, io 0x%x, irq %d",
-    	chip_str, base, io_port, irq);
-    if (dma == DMA_NONE)
-    	printk("\n");
-    else 
-    	printk(", dma %d\n", dma);
-
-    if (options & OPTION_DEBUG_PROBE_ONLY) {
-    	printk ("scsi-ncr53c7xx : probe only enabled, aborting initialization\n");
-    	return -1;
-    }
-
-    max_cmd_size = sizeof(struct NCR53c7x0_cmd) + dsa_len +
-    	/* Size of dynamic part of command structure : */
-	2 * /* Worst case : we don't know if we need DATA IN or DATA out */
-		( 2 * /* Current instructions per scatter/gather segment */ 
-        	  tpnt->sg_tablesize + 
-                  3 /* Current startup / termination required per phase */
-		) *
-	8 /* Each instruction is eight bytes */;
-
-    /* Allocate fixed part of hostdata, dynamic part to hold appropriate
-       SCSI SCRIPT(tm) plus a single, maximum-sized NCR53c7x0_cmd structure.
-
-       We need a NCR53c7x0_cmd structure for scan_scsis() when we are 
-       not loaded as a module, and when we're loaded as a module, we 
-       can't use a non-dynamically allocated structure because modules
-       are vmalloc()'d, which can allow structures to cross page 
-       boundaries and breaks our physical/virtual address assumptions
-       for DMA.
-
-       So, we stick it past the end of our hostdata structure.
-
-       ASSUMPTION : 
-       	 Regardless of how many simultaneous SCSI commands we allow,
-	 the probe code only executes a _single_ instruction at a time,
-	 so we only need one here, and don't need to allocate NCR53c7x0_cmd
-	 structures for each target until we are no longer in scan_scsis
-	 and kmalloc() has become functional (memory_init() happens 
-	 after all device driver initialization).
-    */
-
-    size = sizeof(struct NCR53c7x0_hostdata) + script_len + 
-    /* Note that alignment will be guaranteed, since we put the command
-       allocated at probe time after the fixed-up SCSI script, which 
-       consists of 32 bit words, aligned on a 32 bit boundary.  But
-       on a 64bit machine we need 8 byte alignment for hostdata->free, so
-       we add in another 4 bytes to take care of potential misalignment
-       */
-	(sizeof(void *) - sizeof(u32)) + max_cmd_size + schedule_size;
-
-    page = __get_free_pages(GFP_ATOMIC,1);
-    if(page==0)
-    {
-    	printk(KERN_ERR "53c7xx: out of memory.\n");
-    	return -ENOMEM;
-    }
-#ifdef FORCE_DSA_ALIGNMENT
-    /*
-     * 53c710 rev.0 doesn't have an add-with-carry instruction.
-     * Ensure we allocate enough memory to force DSA alignment.
-    */
-    size += 256;
-#endif
-    /* Size should be < 8K, so we can fit it in two pages. */
-    if (size > 8192) {
-      printk(KERN_ERR "53c7xx: hostdata > 8K\n");
-      return -1;
-    }
-
-    instance = scsi_register (tpnt, 4);
-    if (!instance)
-    {
-        free_page(page);
-	return -1;
-    }
-    instance->hostdata[0] = page;
-    memset((void *)instance->hostdata[0], 0, 8192);
-    cache_push(virt_to_phys((void *)(instance->hostdata[0])), 8192);
-    cache_clear(virt_to_phys((void *)(instance->hostdata[0])), 8192);
-    kernel_set_cachemode((void *)instance->hostdata[0], 8192, IOMAP_NOCACHE_SER);
-
-    /* FIXME : if we ever support an ISA NCR53c7xx based board, we
-       need to check if the chip is running in a 16 bit mode, and if so 
-       unregister it if it is past the 16M (0x1000000) mark */
-
-    hostdata = (struct NCR53c7x0_hostdata *)instance->hostdata[0];
-    hostdata->size = size;
-    hostdata->script_count = script_len / sizeof(u32);
-    hostdata->board = board;
-    hostdata->chip = chip;
-
-    /*
-     * Being memory mapped is more desirable, since 
-     *
-     * - Memory accesses may be faster.
-     *
-     * - The destination and source address spaces are the same for 
-     *	 all instructions, meaning we don't have to twiddle dmode or 
-     *	 any other registers.
-     *
-     * So, we try for memory mapped, and if we don't get it,
-     * we go for port mapped, and that failing we tell the user
-     * it can't work.
-     */
-
-    if (base) {
-	instance->base = base;
-	/* Check for forced I/O mapping */
-    	if (!(options & OPTION_IO_MAPPED)) {
-	    options |= OPTION_MEMORY_MAPPED;
-	    ok = 1;
-	}
-    } else {
-	options &= ~OPTION_MEMORY_MAPPED;
-    }
-
-    if (io_port) {
-	instance->io_port = io_port;
-	options |= OPTION_IO_MAPPED;
-	ok = 1;
-    } else {
-	options &= ~OPTION_IO_MAPPED;
-    }
-
-    if (!ok) {
-	printk ("scsi%d : not initializing, no I/O or memory mapping known \n",
-	    instance->host_no);
-	scsi_unregister (instance);
-	return -1;
-    }
-    instance->irq = irq;
-    instance->dma_channel = dma;
-
-    hostdata->options = options;
-    hostdata->dsa_len = dsa_len;
-    hostdata->max_cmd_size = max_cmd_size;
-    hostdata->num_cmds = 1;
-    hostdata->scsi_clock = clock;
-    /* Initialize single command */
-    tmp = (hostdata->script + hostdata->script_count);
-#ifdef FORCE_DSA_ALIGNMENT
-    {
-	void *t = ROUNDUP(tmp, void *);
-	if (((u32)t & 0xff) > CmdPageStart)
-	    t = (void *)((u32)t + 255);
-	t = (void *)(((u32)t & ~0xff) + CmdPageStart);
-        hostdata->free = t;
-#if 0
-	printk ("scsi: Registered size increased by 256 to %d\n", size);
-	printk ("scsi: CmdPageStart = 0x%02x\n", CmdPageStart);
-	printk ("scsi: tmp = 0x%08x, hostdata->free set to 0x%08x\n",
-			(u32)tmp, (u32)t);
-#endif
-    }
-#else
-    hostdata->free = ROUNDUP(tmp, void *);
-#endif
-    hostdata->free->real = tmp;
-    hostdata->free->size = max_cmd_size;
-    hostdata->free->free = NULL;
-    hostdata->free->next = NULL;
-    hostdata->extra_allocate = 0;
-
-    /* Allocate command start code space */
-    hostdata->schedule = (chip == 700 || chip == 70066) ?
-	NULL : (u32 *) ((char *)hostdata->free + max_cmd_size);
-
-/* 
- * For diagnostic purposes, we don't really care how fast things blaze.
- * For profiling, we want to access the 800ns resolution system clock,
- * using a 'C' call on the host processor.
- *
- * Therefore, there's no need for the NCR chip to directly manipulate
- * this data, and we should put it wherever is most convenient for 
- * Linux.
- */
-    if (track_events) 
-	hostdata->events = (struct NCR53c7x0_event *) (track_events ? 
-	    vmalloc (sizeof (struct NCR53c7x0_event) * track_events) : NULL);
-    else
-	hostdata->events = NULL;
-
-    if (hostdata->events) {
-	memset ((void *) hostdata->events, 0, sizeof(struct NCR53c7x0_event) *
-	    track_events);	
-	hostdata->event_size = track_events;
-	hostdata->event_index = 0;
-    } else 
-	hostdata->event_size = 0;
-
-    return NCR53c7x0_init(instance);
-}
-
-
-/* 
- * Function : static void NCR53c7x0_init_fixup (struct Scsi_Host *host)
- *
- * Purpose :  copy and fixup the SCSI SCRIPTS(tm) code for this device.
- *
- * Inputs : host - pointer to this host adapter's structure
- *
- */
-
-static void 
-NCR53c7x0_init_fixup (struct Scsi_Host *host) {
-    NCR53c7x0_local_declare();
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    unsigned char tmp;
-    int i, ncr_to_memory, memory_to_ncr;
-    u32 base;
-    NCR53c7x0_local_setup(host);
-
-
-    /* XXX - NOTE : this code MUST be made endian aware */
-    /*  Copy code into buffer that was allocated at detection time.  */
-    memcpy ((void *) hostdata->script, (void *) SCRIPT, 
-	sizeof(SCRIPT));
-    /* Fixup labels */
-    for (i = 0; i < PATCHES; ++i) 
-	hostdata->script[LABELPATCHES[i]] += 
-    	    virt_to_bus(hostdata->script);
-    /* Fixup addresses of constants that used to be EXTERNAL */
-
-    patch_abs_32 (hostdata->script, 0, NCR53c7xx_msg_abort, 
-    	virt_to_bus(&(hostdata->NCR53c7xx_msg_abort)));
-    patch_abs_32 (hostdata->script, 0, NCR53c7xx_msg_reject, 
-    	virt_to_bus(&(hostdata->NCR53c7xx_msg_reject)));
-    patch_abs_32 (hostdata->script, 0, NCR53c7xx_zero, 
-    	virt_to_bus(&(hostdata->NCR53c7xx_zero)));
-    patch_abs_32 (hostdata->script, 0, NCR53c7xx_sink, 
-    	virt_to_bus(&(hostdata->NCR53c7xx_sink)));
-    patch_abs_32 (hostdata->script, 0, NOP_insn,
-	virt_to_bus(&(hostdata->NOP_insn)));
-    patch_abs_32 (hostdata->script, 0, schedule,
-	virt_to_bus((void *) hostdata->schedule));
-
-    /* Fixup references to external variables: */
-    for (i = 0; i < EXTERNAL_PATCHES_LEN; ++i)
-       hostdata->script[EXTERNAL_PATCHES[i].offset] +=
-         virt_to_bus(EXTERNAL_PATCHES[i].address);
-
-    /* 
-     * Fixup absolutes set at boot-time.
-     * 
-     * All non-code absolute variables suffixed with "dsa_" and "int_"
-     * are constants, and need no fixup provided the assembler has done 
-     * it for us (I don't know what the "real" NCR assembler does in 
-     * this case, my assembler does the right magic).
-     */
-
-    patch_abs_rwri_data (hostdata->script, 0, dsa_save_data_pointer, 
-    	Ent_dsa_code_save_data_pointer - Ent_dsa_zero);
-    patch_abs_rwri_data (hostdata->script, 0, dsa_restore_pointers,
-    	Ent_dsa_code_restore_pointers - Ent_dsa_zero);
-    patch_abs_rwri_data (hostdata->script, 0, dsa_check_reselect,
-    	Ent_dsa_code_check_reselect - Ent_dsa_zero);
-
-    /*
-     * Just for the hell of it, preserve the settings of 
-     * Burst Length and Enable Read Line bits from the DMODE 
-     * register.  Make sure SCRIPTS start automagically.
-     */
-
-#if defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)
-    /* We know better what we want than 16xBug does! */
-    tmp = DMODE_10_BL_8 | DMODE_10_FC2;
-#else
-    tmp = NCR53c7x0_read8(DMODE_REG_10);
-    tmp &= (DMODE_BL_MASK | DMODE_10_FC2 | DMODE_10_FC1 | DMODE_710_PD |
-								DMODE_710_UO);
-#endif
-
-    if (!(hostdata->options & OPTION_MEMORY_MAPPED)) {
-    	base = (u32) host->io_port;
-    	memory_to_ncr = tmp|DMODE_800_DIOM;
-    	ncr_to_memory = tmp|DMODE_800_SIOM;
-    } else {
-    	base = virt_to_bus((void *)host->base);
-	memory_to_ncr = ncr_to_memory = tmp;
-    }
-
-    /* SCRATCHB_REG_10 == SCRATCHA_REG_800, as it happens */
-    patch_abs_32 (hostdata->script, 0, addr_scratch, base + SCRATCHA_REG_800);
-    patch_abs_32 (hostdata->script, 0, addr_temp, base + TEMP_REG);
-    patch_abs_32 (hostdata->script, 0, addr_dsa, base + DSA_REG);
-
-    /*
-     * I needed some variables in the script to be accessible to 
-     * both the NCR chip and the host processor. For these variables,
-     * I made the arbitrary decision to store them directly in the 
-     * hostdata structure rather than in the RELATIVE area of the 
-     * SCRIPTS.
-     */
-    
-
-    patch_abs_rwri_data (hostdata->script, 0, dmode_memory_to_memory, tmp);
-    patch_abs_rwri_data (hostdata->script, 0, dmode_memory_to_ncr, memory_to_ncr);
-    patch_abs_rwri_data (hostdata->script, 0, dmode_ncr_to_memory, ncr_to_memory);
-
-    patch_abs_32 (hostdata->script, 0, msg_buf, 
-	virt_to_bus((void *)&(hostdata->msg_buf)));
-    patch_abs_32 (hostdata->script, 0, reconnect_dsa_head, 
-    	virt_to_bus((void *)&(hostdata->reconnect_dsa_head)));
-    patch_abs_32 (hostdata->script, 0, addr_reconnect_dsa_head, 
-	virt_to_bus((void *)&(hostdata->addr_reconnect_dsa_head)));
-    patch_abs_32 (hostdata->script, 0, reselected_identify, 
-    	virt_to_bus((void *)&(hostdata->reselected_identify)));
-/* reselected_tag is currently unused */
-#if 0
-    patch_abs_32 (hostdata->script, 0, reselected_tag, 
-    	virt_to_bus((void *)&(hostdata->reselected_tag)));
-#endif
-
-    patch_abs_32 (hostdata->script, 0, test_dest, 
-	virt_to_bus((void*)&hostdata->test_dest));
-    patch_abs_32 (hostdata->script, 0, test_src, 
-	virt_to_bus(&hostdata->test_source));
-    patch_abs_32 (hostdata->script, 0, saved_dsa,
-	virt_to_bus((void *)&hostdata->saved2_dsa));
-    patch_abs_32 (hostdata->script, 0, emulfly,
-	virt_to_bus((void *)&hostdata->emulated_intfly));
-
-    patch_abs_rwri_data (hostdata->script, 0, dsa_check_reselect, 
-	(unsigned char)(Ent_dsa_code_check_reselect - Ent_dsa_zero));
-
-/* These are for event logging; the ncr_event enum contains the 
-   actual interrupt numbers. */
-#ifdef A_int_EVENT_SELECT
-   patch_abs_32 (hostdata->script, 0, int_EVENT_SELECT, (u32) EVENT_SELECT);
-#endif
-#ifdef A_int_EVENT_DISCONNECT
-   patch_abs_32 (hostdata->script, 0, int_EVENT_DISCONNECT, (u32) EVENT_DISCONNECT);
-#endif
-#ifdef A_int_EVENT_RESELECT
-   patch_abs_32 (hostdata->script, 0, int_EVENT_RESELECT, (u32) EVENT_RESELECT);
-#endif
-#ifdef A_int_EVENT_COMPLETE
-   patch_abs_32 (hostdata->script, 0, int_EVENT_COMPLETE, (u32) EVENT_COMPLETE);
-#endif
-#ifdef A_int_EVENT_IDLE
-   patch_abs_32 (hostdata->script, 0, int_EVENT_IDLE, (u32) EVENT_IDLE);
-#endif
-#ifdef A_int_EVENT_SELECT_FAILED
-   patch_abs_32 (hostdata->script, 0, int_EVENT_SELECT_FAILED, 
-	(u32) EVENT_SELECT_FAILED);
-#endif
-#ifdef A_int_EVENT_BEFORE_SELECT
-   patch_abs_32 (hostdata->script, 0, int_EVENT_BEFORE_SELECT,
-	(u32) EVENT_BEFORE_SELECT);
-#endif
-#ifdef A_int_EVENT_RESELECT_FAILED
-   patch_abs_32 (hostdata->script, 0, int_EVENT_RESELECT_FAILED, 
-	(u32) EVENT_RESELECT_FAILED);
-#endif
-
-    /*
-     * Make sure the NCR and Linux code agree on the location of 
-     * certain fields.
-     */
-
-    hostdata->E_accept_message = Ent_accept_message;
-    hostdata->E_command_complete = Ent_command_complete;		
-    hostdata->E_cmdout_cmdout = Ent_cmdout_cmdout;
-    hostdata->E_data_transfer = Ent_data_transfer;
-    hostdata->E_debug_break = Ent_debug_break;	
-    hostdata->E_dsa_code_template = Ent_dsa_code_template;
-    hostdata->E_dsa_code_template_end = Ent_dsa_code_template_end;
-    hostdata->E_end_data_transfer = Ent_end_data_transfer;
-    hostdata->E_initiator_abort = Ent_initiator_abort;
-    hostdata->E_msg_in = Ent_msg_in;
-    hostdata->E_other_transfer = Ent_other_transfer;
-    hostdata->E_other_in = Ent_other_in;
-    hostdata->E_other_out = Ent_other_out;
-    hostdata->E_reject_message = Ent_reject_message;
-    hostdata->E_respond_message = Ent_respond_message;
-    hostdata->E_select = Ent_select;
-    hostdata->E_select_msgout = Ent_select_msgout;
-    hostdata->E_target_abort = Ent_target_abort;
-#ifdef Ent_test_0
-    hostdata->E_test_0 = Ent_test_0;
-#endif
-    hostdata->E_test_1 = Ent_test_1;
-    hostdata->E_test_2 = Ent_test_2;
-#ifdef Ent_test_3
-    hostdata->E_test_3 = Ent_test_3;
-#endif
-    hostdata->E_wait_reselect = Ent_wait_reselect;
-    hostdata->E_dsa_code_begin = Ent_dsa_code_begin;
-
-    hostdata->dsa_cmdout = A_dsa_cmdout;
-    hostdata->dsa_cmnd = A_dsa_cmnd;
-    hostdata->dsa_datain = A_dsa_datain;
-    hostdata->dsa_dataout = A_dsa_dataout;
-    hostdata->dsa_end = A_dsa_end;			
-    hostdata->dsa_msgin = A_dsa_msgin;
-    hostdata->dsa_msgout = A_dsa_msgout;
-    hostdata->dsa_msgout_other = A_dsa_msgout_other;
-    hostdata->dsa_next = A_dsa_next;
-    hostdata->dsa_select = A_dsa_select;
-    hostdata->dsa_start = Ent_dsa_code_template - Ent_dsa_zero;
-    hostdata->dsa_status = A_dsa_status;
-    hostdata->dsa_jump_dest = Ent_dsa_code_fix_jump - Ent_dsa_zero + 
-	8 /* destination operand */;
-
-    /* sanity check */
-    if (A_dsa_fields_start != Ent_dsa_code_template_end - 
-    	Ent_dsa_zero) 
-    	printk("scsi%d : NCR dsa_fields start is %d not %d\n",
-    	    host->host_no, A_dsa_fields_start, Ent_dsa_code_template_end - 
-    	    Ent_dsa_zero);
-
-    printk("scsi%d : NCR code relocated to 0x%lx (virt 0x%p)\n", host->host_no,
-	virt_to_bus(hostdata->script), hostdata->script);
-}
-
-/*
- * Function : static int NCR53c7xx_run_tests (struct Scsi_Host *host)
- *
- * Purpose : run various verification tests on the NCR chip, 
- *	including interrupt generation, and proper bus mastering
- * 	operation.
- * 
- * Inputs : host - a properly initialized Scsi_Host structure
- *
- * Preconditions : the NCR chip must be in a halted state.
- *
- * Returns : 0 if all tests were successful, -1 on error.
- * 
- */
-
-static int 
-NCR53c7xx_run_tests (struct Scsi_Host *host) {
-    NCR53c7x0_local_declare();
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    unsigned long timeout;
-    u32 start;
-    int failed, i;
-    unsigned long flags;
-    NCR53c7x0_local_setup(host);
-
-    /* The NCR chip _must_ be idle to run the test scripts */
-
-    local_irq_save(flags);
-    if (!hostdata->idle) {
-	printk ("scsi%d : chip not idle, aborting tests\n", host->host_no);
-	local_irq_restore(flags);
-	return -1;
-    }
-
-    /* 
-     * Check for functional interrupts, this could work as an
-     * autoprobe routine.
-     */
-
-    if ((hostdata->options & OPTION_DEBUG_TEST1) && 
-	    hostdata->state != STATE_DISABLED) {
-	hostdata->idle = 0;
-	hostdata->test_running = 1;
-	hostdata->test_completed = -1;
-	hostdata->test_dest = 0;
-	hostdata->test_source = 0xdeadbeef;
-	start = virt_to_bus (hostdata->script) + hostdata->E_test_1;
-    	hostdata->state = STATE_RUNNING;
-	printk ("scsi%d : test 1", host->host_no);
-	NCR53c7x0_write32 (DSP_REG, start);
-	if (hostdata->options & OPTION_DEBUG_TRACE)
-	    NCR53c7x0_write8 (DCNTL_REG, hostdata->saved_dcntl | DCNTL_SSM |
-						DCNTL_STD);
-	printk (" started\n");
-	local_irq_restore(flags);
-
-	/* 
-	 * This is currently a .5 second timeout, since (in theory) no slow 
-	 * board will take that long.  In practice, we've seen one 
-	 * pentium which occassionally fails with this, but works with 
-	 * 10 times as much?
-	 */
-
-	timeout = jiffies + 5 * HZ / 10;
-	while ((hostdata->test_completed == -1) && time_before(jiffies, timeout))
-		barrier();
-
-	failed = 1;
-	if (hostdata->test_completed == -1)
-	    printk ("scsi%d : driver test 1 timed out%s\n",host->host_no ,
-		(hostdata->test_dest == 0xdeadbeef) ? 
-		    " due to lost interrupt.\n"
-		    "         Please verify that the correct IRQ is being used for your board,\n"
-		    : "");
-	else if (hostdata->test_completed != 1) 
-	    printk ("scsi%d : test 1 bad interrupt value (%d)\n", 
-		host->host_no, hostdata->test_completed);
-	else 
-	    failed = (hostdata->test_dest != 0xdeadbeef);
-
-	if (hostdata->test_dest != 0xdeadbeef) {
-	    printk ("scsi%d : driver test 1 read 0x%x instead of 0xdeadbeef indicating a\n"
-                    "         probable cache invalidation problem.  Please configure caching\n"
-		    "         as write-through or disabled\n",
-		host->host_no, hostdata->test_dest);
-	}
-
-	if (failed) {
-	    printk ("scsi%d : DSP = 0x%p (script at 0x%p, start at 0x%x)\n",
-		host->host_no, bus_to_virt(NCR53c7x0_read32(DSP_REG)),
-		hostdata->script, start);
-	    printk ("scsi%d : DSPS = 0x%x\n", host->host_no,
-		NCR53c7x0_read32(DSPS_REG));
-	    local_irq_restore(flags);
-	    return -1;
-	}
-    	hostdata->test_running = 0;
-    }
-
-    if ((hostdata->options & OPTION_DEBUG_TEST2) && 
-	hostdata->state != STATE_DISABLED) {
-	u32 dsa[48];
-    	unsigned char identify = IDENTIFY(0, 0);
-	unsigned char cmd[6];
-	unsigned char data[36];
-    	unsigned char status = 0xff;
-    	unsigned char msg = 0xff;
-
-    	cmd[0] = INQUIRY;
-    	cmd[1] = cmd[2] = cmd[3] = cmd[5] = 0;
-    	cmd[4] = sizeof(data); 
-
-    	dsa[2] = 1;
-    	dsa[3] = virt_to_bus(&identify);
-    	dsa[4] = 6;
-    	dsa[5] = virt_to_bus(&cmd);
-    	dsa[6] = sizeof(data);
-    	dsa[7] = virt_to_bus(&data);
-    	dsa[8] = 1;
-    	dsa[9] = virt_to_bus(&status);
-    	dsa[10] = 1;
-    	dsa[11] = virt_to_bus(&msg);
-
-	for (i = 0; i < 6; ++i) {
-#ifdef VALID_IDS
-	    if (!hostdata->valid_ids[i])
-		continue;
-#endif
-	    local_irq_disable();
-	    if (!hostdata->idle) {
-		printk ("scsi%d : chip not idle, aborting tests\n", host->host_no);
-		local_irq_restore(flags);
-		return -1;
-	    }
-
-	    /* 710: bit mapped scsi ID, async   */
-            dsa[0] = (1 << i) << 16;
-	    hostdata->idle = 0;
-	    hostdata->test_running = 2;
-	    hostdata->test_completed = -1;
-	    start = virt_to_bus(hostdata->script) + hostdata->E_test_2;
-	    hostdata->state = STATE_RUNNING;
-	    NCR53c7x0_write32 (DSA_REG, virt_to_bus(dsa));
-	    NCR53c7x0_write32 (DSP_REG, start);
-	    if (hostdata->options & OPTION_DEBUG_TRACE)
-	        NCR53c7x0_write8 (DCNTL_REG, hostdata->saved_dcntl |
-				DCNTL_SSM | DCNTL_STD);
-	    local_irq_restore(flags);
-
-	    timeout = jiffies + 5 * HZ;	/* arbitrary */
-	    while ((hostdata->test_completed == -1) && time_before(jiffies, timeout))
-	    	barrier();
-
-	    NCR53c7x0_write32 (DSA_REG, 0);
-
-	    if (hostdata->test_completed == 2) {
-		data[35] = 0;
-		printk ("scsi%d : test 2 INQUIRY to target %d, lun 0 : %s\n",
-		    host->host_no, i, data + 8);
-		printk ("scsi%d : status ", host->host_no);
-		scsi_print_status (status);
-		printk ("\nscsi%d : message ", host->host_no);
-		spi_print_msg(&msg);
-		printk ("\n");
-	    } else if (hostdata->test_completed == 3) {
-		printk("scsi%d : test 2 no connection with target %d\n",
-		    host->host_no, i);
-		if (!hostdata->idle) {
-		    printk("scsi%d : not idle\n", host->host_no);
-		    local_irq_restore(flags);
-		    return -1;
-		}
-	    } else if (hostdata->test_completed == -1) {
-		printk ("scsi%d : test 2 timed out\n", host->host_no);
-		local_irq_restore(flags);
-		return -1;
-	    } 
-	    hostdata->test_running = 0;
-	}
-    }
-
-    local_irq_restore(flags);
-    return 0;
-}
-
-/*
- * Function : static void NCR53c7xx_dsa_fixup (struct NCR53c7x0_cmd *cmd)
- *
- * Purpose : copy the NCR53c8xx dsa structure into cmd's dsa buffer,
- * 	performing all necessary relocation.
- *
- * Inputs : cmd, a NCR53c7x0_cmd structure with a dsa area large
- *	enough to hold the NCR53c8xx dsa.
- */
-
-static void 
-NCR53c7xx_dsa_fixup (struct NCR53c7x0_cmd *cmd) {
-    Scsi_Cmnd *c = cmd->cmd;
-    struct Scsi_Host *host = c->device->host;
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-    	host->hostdata[0];
-    int i;
-
-    memcpy (cmd->dsa, hostdata->script + (hostdata->E_dsa_code_template / 4),
-    	hostdata->E_dsa_code_template_end - hostdata->E_dsa_code_template);
-
-    /* 
-     * Note : within the NCR 'C' code, dsa points to the _start_
-     * of the DSA structure, and _not_ the offset of dsa_zero within
-     * that structure used to facilitate shorter signed offsets
-     * for the 8 bit ALU.
-     * 
-     * The implications of this are that 
-     * 
-     * - 32 bit A_dsa_* absolute values require an additional 
-     * 	 dsa_zero added to their value to be correct, since they are 
-     *   relative to dsa_zero which is in essentially a separate
-     *   space from the code symbols.
-     *
-     * - All other symbols require no special treatment.
-     */
-
-    patch_abs_tci_data (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
-    	dsa_temp_lun, c->device->lun);
-    patch_abs_32 (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
-	dsa_temp_addr_next, virt_to_bus(&cmd->dsa_next_addr));
-    patch_abs_32 (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
-    	dsa_temp_next, virt_to_bus(cmd->dsa) + Ent_dsa_zero -
-	Ent_dsa_code_template + A_dsa_next);
-    patch_abs_32 (cmd->dsa, Ent_dsa_code_template / sizeof(u32), 
-    	dsa_temp_sync, virt_to_bus((void *)hostdata->sync[c->device->id].script));
-    patch_abs_32 (cmd->dsa, Ent_dsa_code_template / sizeof(u32), 
-    	dsa_sscf_710, virt_to_bus((void *)&hostdata->sync[c->device->id].sscf_710));
-    patch_abs_tci_data (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
-    	    dsa_temp_target, 1 << c->device->id);
-    /* XXX - new pointer stuff */
-    patch_abs_32 (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
-    	dsa_temp_addr_saved_pointer, virt_to_bus(&cmd->saved_data_pointer));
-    patch_abs_32 (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
-    	dsa_temp_addr_saved_residual, virt_to_bus(&cmd->saved_residual));
-    patch_abs_32 (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
-    	dsa_temp_addr_residual, virt_to_bus(&cmd->residual));
-
-    /*  XXX - new start stuff */
-
-    patch_abs_32 (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
-	dsa_temp_addr_dsa_value, virt_to_bus(&cmd->dsa_addr));
-}
-
-/* 
- * Function : run_process_issue_queue (void)
- * 
- * Purpose : insure that the coroutine is running and will process our 
- * 	request.  process_issue_queue_running is checked/set here (in an 
- *	inline function) rather than in process_issue_queue itself to reduce 
- * 	the chances of stack overflow.
- *
- */
-
-static volatile int process_issue_queue_running = 0;
-
-static __inline__ void 
-run_process_issue_queue(void) {
-    unsigned long flags;
-    local_irq_save(flags);
-    if (!process_issue_queue_running) {
-	process_issue_queue_running = 1;
-        process_issue_queue(flags);
-	/* 
-         * process_issue_queue_running is cleared in process_issue_queue 
-	 * once it can't do more work, and process_issue_queue exits with 
-	 * interrupts disabled.
-	 */
-    }
-    local_irq_restore(flags);
-}
-
-/*
- * Function : static void abnormal_finished (struct NCR53c7x0_cmd *cmd, int
- *	result)
- *
- * Purpose : mark SCSI command as finished, OR'ing the host portion 
- *	of the result word into the result field of the corresponding
- *	Scsi_Cmnd structure, and removing it from the internal queues.
- *
- * Inputs : cmd - command, result - entire result field
- *
- * Preconditions : the 	NCR chip should be in a halted state when 
- *	abnormal_finished is run, since it modifies structures which
- *	the NCR expects to have exclusive access to.
- */
-
-static void 
-abnormal_finished (struct NCR53c7x0_cmd *cmd, int result) {
-    Scsi_Cmnd *c = cmd->cmd;
-    struct Scsi_Host *host = c->device->host;
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-    	host->hostdata[0];
-    unsigned long flags;
-    int left, found;
-    volatile struct NCR53c7x0_cmd * linux_search;
-    volatile struct NCR53c7x0_cmd * volatile *linux_prev;
-    volatile u32 *ncr_prev, *ncrcurrent, ncr_search;
-
-#if 0
-    printk ("scsi%d: abnormal finished\n", host->host_no);
-#endif
-
-    local_irq_save(flags);
-    found = 0;
-    /* 
-     * Traverse the NCR issue array until we find a match or run out 
-     * of instructions.  Instructions in the NCR issue array are 
-     * either JUMP or NOP instructions, which are 2 words in length.
-     */
-
-
-    for (found = 0, left = host->can_queue, ncrcurrent = hostdata->schedule; 
-	left > 0; --left, ncrcurrent += 2)
-    {
-	if (issue_to_cmd (host, hostdata, (u32 *) ncrcurrent) == cmd) 
-	{
-	    ncrcurrent[0] = hostdata->NOP_insn;
-	    ncrcurrent[1] = 0xdeadbeef;
-	    ++found;
-	    break;
-	}
-    }
-	
-    /* 
-     * Traverse the NCR reconnect list of DSA structures until we find 
-     * a pointer to this dsa or have found too many command structures.  
-     * We let prev point at the next field of the previous element or 
-     * head of the list, so we don't do anything different for removing 
-     * the head element.  
-     */
-
-    for (left = host->can_queue,
-	    ncr_search = hostdata->reconnect_dsa_head, 
-	    ncr_prev = &hostdata->reconnect_dsa_head;
-	left >= 0 && ncr_search && 
-	    ((char*)bus_to_virt(ncr_search) + hostdata->dsa_start) 
-		!= (char *) cmd->dsa;
-	ncr_prev = (u32*) ((char*)bus_to_virt(ncr_search) + 
-	    hostdata->dsa_next), ncr_search = *ncr_prev, --left);
-
-    if (left < 0) 
-	printk("scsi%d: loop detected in ncr reconncect list\n",
-	    host->host_no);
-    else if (ncr_search) {
-	if (found)
-	    printk("scsi%d: scsi %ld in ncr issue array and reconnect lists\n",
-		host->host_no, c->pid);
-	else {
-	    volatile u32 * next = (u32 *) 
-	    	((char *)bus_to_virt(ncr_search) + hostdata->dsa_next);
-	    *ncr_prev = *next;
-/* If we're at the tail end of the issue queue, update that pointer too. */
-	    found = 1;
-	}
-    }
-
-    /*
-     * Traverse the host running list until we find this command or discover
-     * we have too many elements, pointing linux_prev at the next field of the 
-     * linux_previous element or head of the list, search at this element.
-     */
-
-    for (left = host->can_queue, linux_search = hostdata->running_list, 
-	    linux_prev = &hostdata->running_list;
-	left >= 0 && linux_search && linux_search != cmd;
-	linux_prev = &(linux_search->next), 
-	    linux_search = linux_search->next, --left);
-    
-    if (left < 0) 
-	printk ("scsi%d: loop detected in host running list for scsi pid %ld\n",
-	    host->host_no, c->pid);
-    else if (linux_search) {
-	*linux_prev = linux_search->next;
-	--hostdata->busy[c->device->id][c->device->lun];
-    }
-
-    /* Return the NCR command structure to the free list */
-    cmd->next = hostdata->free;
-    hostdata->free = cmd;
-    c->host_scribble = NULL;
-
-    /* And return */
-    c->result = result;
-    c->scsi_done(c);
-
-    local_irq_restore(flags);
-    run_process_issue_queue();
-}
-
-/* 
- * Function : static void intr_break (struct Scsi_Host *host,
- * 	struct NCR53c7x0_cmd *cmd)
- *
- * Purpose :  Handler for breakpoint interrupts from a SCSI script
- *
- * Inputs : host - pointer to this host adapter's structure,
- * 	cmd - pointer to the command (if any) dsa was pointing 
- * 	to.
- *
- */
-
-static void 
-intr_break (struct Scsi_Host *host, struct 
-    NCR53c7x0_cmd *cmd) {
-    NCR53c7x0_local_declare();
-    struct NCR53c7x0_break *bp;
-#if 0
-    Scsi_Cmnd *c = cmd ? cmd->cmd : NULL;
-#endif
-    u32 *dsp;
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];		
-    unsigned long flags;
-    NCR53c7x0_local_setup(host);
-
-    /*
-     * Find the break point corresponding to this address, and 
-     * dump the appropriate debugging information to standard 
-     * output.  
-     */
-    local_irq_save(flags);
-    dsp = (u32 *) bus_to_virt(NCR53c7x0_read32(DSP_REG));
-    for (bp = hostdata->breakpoints; bp && bp->address != dsp; 
-    	bp = bp->next);
-    if (!bp) 
-    	panic("scsi%d : break point interrupt from %p with no breakpoint!",
-    	    host->host_no, dsp);
-
-    /*
-     * Configure the NCR chip for manual start mode, so that we can 
-     * point the DSP register at the instruction that follows the 
-     * INT int_debug_break instruction.
-     */
-
-    NCR53c7x0_write8 (hostdata->dmode, 
-	NCR53c7x0_read8(hostdata->dmode)|DMODE_MAN);
-
-    /*
-     * And update the DSP register, using the size of the old 
-     * instruction in bytes.
-     */
-
-    local_irq_restore(flags);
-}
-/*
- * Function : static void print_synchronous (const char *prefix, 
- *	const unsigned char *msg)
- * 
- * Purpose : print a pretty, user and machine parsable representation
- *	of a SDTR message, including the "real" parameters, data
- *	clock so we can tell transfer rate at a glance.
- *
- * Inputs ; prefix - text to prepend, msg - SDTR message (5 bytes)
- */
-
-static void
-print_synchronous (const char *prefix, const unsigned char *msg) {
-    if (msg[4]) {
-	int Hz = 1000000000 / (msg[3] * 4);
-	int integer = Hz / 1000000;
-	int fraction = (Hz - (integer * 1000000)) / 10000;
-	printk ("%speriod %dns offset %d %d.%02dMHz %s SCSI%s\n",
-	    prefix, (int) msg[3] * 4, (int) msg[4], integer, fraction,
-	    (((msg[3] * 4) < 200) ? "FAST" : "synchronous"),
-	    (((msg[3] * 4) < 200) ? "-II" : ""));
-    } else 
-	printk ("%sasynchronous SCSI\n", prefix);
-}
-
-/*
- * Function : static void set_synchronous (struct Scsi_Host *host, 
- *	 	int target, int sxfer, int scntl3, int now_connected)
- *
- * Purpose : reprogram transfers between the selected SCSI initiator and 
- *	target with the given register values; in the indirect
- *	select operand, reselection script, and chip registers.
- *
- * Inputs : host - NCR53c7,8xx SCSI host, target - number SCSI target id,
- *	sxfer and scntl3 - NCR registers. now_connected - if non-zero, 
- *	we should reprogram the registers now too.
- *
- *      NOTE:  For 53c710, scntl3 is actually used for SCF bits from
- *	SBCL, as we don't have a SCNTL3.
- */
-
-static void
-set_synchronous (struct Scsi_Host *host, int target, int sxfer, int scntl3,
-    int now_connected) {
-    NCR53c7x0_local_declare();
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *) 
-	host->hostdata[0];
-    u32 *script;
-    NCR53c7x0_local_setup(host);
-
-    /* These are eight bit registers */
-    sxfer &= 0xff;
-    scntl3 &= 0xff;
-
-    hostdata->sync[target].sxfer_sanity = sxfer;
-    hostdata->sync[target].scntl3_sanity = scntl3;
-
-/* 
- * HARD CODED : synchronous script is EIGHT words long.  This 
- * must agree with 53c7.8xx.h
- */
-
-    if ((hostdata->chip != 700) && (hostdata->chip != 70066)) {
-	hostdata->sync[target].select_indirect = (1 << target) << 16 |
-		(sxfer << 8);
-	hostdata->sync[target].sscf_710 = scntl3;
-
-	script = (u32 *) hostdata->sync[target].script;
-
-	/* XXX - add NCR53c7x0 code to reprogram SCF bits if we want to */
-	script[0] = ((DCMD_TYPE_RWRI | DCMD_RWRI_OPC_MODIFY |
-		DCMD_RWRI_OP_MOVE) << 24) |
-		(SBCL_REG << 16) | (scntl3 << 8);
-	script[1] = 0;
-	script += 2;
-
-	script[0] = ((DCMD_TYPE_RWRI | DCMD_RWRI_OPC_MODIFY |
-	    DCMD_RWRI_OP_MOVE) << 24) |
-		(SXFER_REG << 16) | (sxfer << 8);
-	script[1] = 0;
-	script += 2;
-
-#ifdef DEBUG_SYNC_INTR
-	if (hostdata->options & OPTION_DEBUG_DISCONNECT) {
-	    script[0] = ((DCMD_TYPE_TCI|DCMD_TCI_OP_INT) << 24) | DBC_TCI_TRUE;
-	    script[1] = DEBUG_SYNC_INTR;
-	    script += 2;
-	}
-#endif
-
-	script[0] = ((DCMD_TYPE_TCI|DCMD_TCI_OP_RETURN) << 24) | DBC_TCI_TRUE;
-	script[1] = 0;
-	script += 2;
-    }
-
-    if (hostdata->options & OPTION_DEBUG_SYNCHRONOUS) 
-	printk ("scsi%d : target %d sync parameters are sxfer=0x%x, scntl3=0x%x\n",
-	host->host_no, target, sxfer, scntl3);
-
-    if (now_connected) {
-	NCR53c7x0_write8(SBCL_REG, scntl3);
-	NCR53c7x0_write8(SXFER_REG, sxfer);
-    }
-}
-
-
-/*
- * Function : static int asynchronous (struct Scsi_Host *host, int target)
- *
- * Purpose : reprogram between the selected SCSI Host adapter and target 
- *      (assumed to be currently connected) for asynchronous transfers.
- *
- * Inputs : host - SCSI host structure, target - numeric target ID.
- *
- * Preconditions : the NCR chip should be in one of the halted states
- */
-    
-static void
-asynchronous (struct Scsi_Host *host, int target) {
-    NCR53c7x0_local_declare();
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    NCR53c7x0_local_setup(host);
-    set_synchronous (host, target, /* no offset */ 0, hostdata->saved_scntl3,
-	1);
-    printk ("scsi%d : setting target %d to asynchronous SCSI\n",
-	host->host_no, target);
-}
-
-/* 
- * XXX - do we want to go out of our way (ie, add extra code to selection
- * 	in the NCR53c710/NCR53c720 script) to reprogram the synchronous
- * 	conversion bits, or can we be content in just setting the 
- * 	sxfer bits?  I chose to do so [richard@sleepie.demon.co.uk]
- */
-
-/* Table for NCR53c8xx synchronous values */
-
-/* This table is also correct for 710, allowing that scf=4 is equivalent
- * of SSCF=0 (ie use DCNTL, divide by 3) for a 50.01-66.00MHz clock.
- * For any other clock values, we cannot use entries with SCF values of
- * 4.  I guess that for a 66MHz clock, the slowest it will set is 2MHz,
- * and for a 50MHz clock, the slowest will be 2.27Mhz.  Should check
- * that a device doesn't try and negotiate sync below these limits!
- */
- 
-static const struct {
-    int div;		/* Total clock divisor * 10 */
-    unsigned char scf;	/* */
-    unsigned char tp;	/* 4 + tp = xferp divisor */
-} syncs[] = {
-/*	div	scf	tp	div	scf	tp	div	scf	tp */
-    {	40,	1,	0}, {	50,	1,	1}, {	60,	1,	2}, 
-    {	70,	1,	3}, {	75,	2,	1}, {	80,	1,	4},
-    {	90,	1,	5}, {	100,	1,	6}, {	105,	2,	3},
-    {	110,	1,	7}, {	120,	2,	4}, {	135,	2,	5},
-    {	140,	3,	3}, {	150,	2,	6}, {	160,	3,	4},
-    {	165,	2,	7}, {	180,	3,	5}, {	200,	3,	6},
-    {	210,	4,	3}, {	220,	3,	7}, {	240,	4,	4},
-    {	270,	4,	5}, {	300,	4,	6}, {	330,	4,	7}
-};
-
-/*
- * Function : static void synchronous (struct Scsi_Host *host, int target, 
- *	char *msg)
- *
- * Purpose : reprogram transfers between the selected SCSI initiator and 
- *	target for synchronous SCSI transfers such that the synchronous 
- *	offset is less than that requested and period at least as long 
- *	as that requested.  Also modify *msg such that it contains 
- *	an appropriate response. 
- *
- * Inputs : host - NCR53c7,8xx SCSI host, target - number SCSI target id,
- *	msg - synchronous transfer request.
- */
-
-
-static void
-synchronous (struct Scsi_Host *host, int target, char *msg) {
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    int desire, divisor, i, limit;
-    unsigned char scntl3, sxfer;
-/* The diagnostic message fits on one line, even with max. width integers */
-    char buf[80];
-
-/* Desired transfer clock in Hz */
-    desire = 1000000000L / (msg[3] * 4);
-/* Scale the available SCSI clock by 10 so we get tenths */
-    divisor = (hostdata->scsi_clock * 10) / desire;
-
-/* NCR chips can handle at most an offset of 8 */
-    if (msg[4] > 8)
-	msg[4] = 8;
-
-    if (hostdata->options & OPTION_DEBUG_SDTR)
-    	printk("scsi%d : optimal synchronous divisor of %d.%01d\n",
-	    host->host_no, divisor / 10, divisor % 10);
-
-    limit = ARRAY_SIZE(syncs) - 1;
-    for (i = 0; (i < limit) && (divisor > syncs[i].div); ++i);
-
-    if (hostdata->options & OPTION_DEBUG_SDTR)
-    	printk("scsi%d : selected synchronous divisor of %d.%01d\n",
-	    host->host_no, syncs[i].div / 10, syncs[i].div % 10);
-
-    msg[3] = ((1000000000L / hostdata->scsi_clock) * syncs[i].div / 10 / 4);
-
-    if (hostdata->options & OPTION_DEBUG_SDTR)
-    	printk("scsi%d : selected synchronous period of %dns\n", host->host_no,
-	    msg[3] * 4);
-
-    scntl3 = syncs[i].scf;
-    sxfer = (msg[4] << SXFER_MO_SHIFT) | (syncs[i].tp << 4);
-    if (hostdata->options & OPTION_DEBUG_SDTR)
-    	printk ("scsi%d : sxfer=0x%x scntl3=0x%x\n", 
-	    host->host_no, (int) sxfer, (int) scntl3);
-    set_synchronous (host, target, sxfer, scntl3, 1);
-    sprintf (buf, "scsi%d : setting target %d to ", host->host_no, target);
-    print_synchronous (buf, msg);
-}
-
-/* 
- * Function : static int NCR53c7x0_dstat_sir_intr (struct Scsi_Host *host,
- * 	struct NCR53c7x0_cmd *cmd)
- *
- * Purpose :  Handler for INT generated instructions for the 
- * 	NCR53c810/820 SCSI SCRIPT
- *
- * Inputs : host - pointer to this host adapter's structure,
- * 	cmd - pointer to the command (if any) dsa was pointing 
- * 	to.
- *
- */
-
-static int 
-NCR53c7x0_dstat_sir_intr (struct Scsi_Host *host, struct 
-    NCR53c7x0_cmd *cmd) {
-    NCR53c7x0_local_declare();
-    int print;
-    Scsi_Cmnd *c = cmd ? cmd->cmd : NULL;
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];		
-    u32 dsps,*dsp;	/* Argument of the INT instruction */
-
-    NCR53c7x0_local_setup(host);
-    dsps = NCR53c7x0_read32(DSPS_REG);
-    dsp = (u32 *) bus_to_virt(NCR53c7x0_read32(DSP_REG));
-
-    /* RGH 150597:  Frig.  Commands which fail with Check Condition are
-     * Flagged as successful - hack dsps to indicate check condition */
-#if 0
-    /* RGH 200597:  Need to disable for BVME6000, as it gets Check Conditions
-     * and then dies.  Seems to handle Check Condition at startup, but
-     * not mid kernel build. */
-    if (dsps == A_int_norm_emulateintfly && cmd && cmd->result == 2)
-        dsps = A_int_err_check_condition;
-#endif
-
-    if (hostdata->options & OPTION_DEBUG_INTR) 
-	printk ("scsi%d : DSPS = 0x%x\n", host->host_no, dsps);
-
-    switch (dsps) {
-    case A_int_msg_1:
-	print = 1;
-	switch (hostdata->msg_buf[0]) {
-	/* 
-	 * Unless we've initiated synchronous negotiation, I don't
-	 * think that this should happen.
-	 */
-	case MESSAGE_REJECT:
-	    hostdata->dsp = hostdata->script + hostdata->E_accept_message /
-		sizeof(u32);
-	    hostdata->dsp_changed = 1;
-	    if (cmd && (cmd->flags & CMD_FLAG_SDTR)) {
-		printk ("scsi%d : target %d rejected SDTR\n", host->host_no, 
-		    c->device->id);
-		cmd->flags &= ~CMD_FLAG_SDTR;
-		asynchronous (host, c->device->id);
-		print = 0;
-	    } 
-	    break;
-	case INITIATE_RECOVERY:
-	    printk ("scsi%d : extended contingent allegiance not supported yet, rejecting\n",
-		host->host_no);
-	    /* Fall through to default */
-	    hostdata->dsp = hostdata->script + hostdata->E_reject_message /
-		sizeof(u32);
-	    hostdata->dsp_changed = 1;
-	    break;
-	default:
-	    printk ("scsi%d : unsupported message, rejecting\n",
-		host->host_no);
-	    hostdata->dsp = hostdata->script + hostdata->E_reject_message /
-		sizeof(u32);
-	    hostdata->dsp_changed = 1;
-	}
-	if (print) {
-	    printk ("scsi%d : received message", host->host_no);
-	    if (c) 
-	    	printk (" from target %d lun %d ", c->device->id, c->device->lun);
-	    spi_print_msg((unsigned char *) hostdata->msg_buf);
-	    printk("\n");
-	}
-	
-	return SPECIFIC_INT_NOTHING;
-
-
-    case A_int_msg_sdtr:
-/*
- * At this point, hostdata->msg_buf contains
- * 0 EXTENDED MESSAGE
- * 1 length 
- * 2 SDTR
- * 3 period * 4ns
- * 4 offset
- */
-
-	if (cmd) {
-	    char buf[80];
-	    sprintf (buf, "scsi%d : target %d %s ", host->host_no, c->device->id,
-		(cmd->flags & CMD_FLAG_SDTR) ? "accepting" : "requesting");
-	    print_synchronous (buf, (unsigned char *) hostdata->msg_buf);
-
-	/* 
-	 * Initiator initiated, won't happen unless synchronous 
-	 * 	transfers are enabled.  If we get a SDTR message in
-	 * 	response to our SDTR, we should program our parameters
-	 * 	such that 
-	 *		offset <= requested offset
-	 *		period >= requested period		 	
-   	 */
-	    if (cmd->flags & CMD_FLAG_SDTR) {
-		cmd->flags &= ~CMD_FLAG_SDTR; 
-		if (hostdata->msg_buf[4]) 
-		    synchronous (host, c->device->id, (unsigned char *) 
-		    	hostdata->msg_buf);
-		else 
-		    asynchronous (host, c->device->id);
-		hostdata->dsp = hostdata->script + hostdata->E_accept_message /
-		    sizeof(u32);
-		hostdata->dsp_changed = 1;
-		return SPECIFIC_INT_NOTHING;
-	    } else {
-		if (hostdata->options & OPTION_SYNCHRONOUS)  {
-		    cmd->flags |= CMD_FLAG_DID_SDTR;
-		    synchronous (host, c->device->id, (unsigned char *) 
-			hostdata->msg_buf);
-		} else {
-		    hostdata->msg_buf[4] = 0;		/* 0 offset = async */
-		    asynchronous (host, c->device->id);
-		}
-		patch_dsa_32 (cmd->dsa, dsa_msgout_other, 0, 5);
-		patch_dsa_32 (cmd->dsa, dsa_msgout_other, 1, (u32) 
-		    virt_to_bus ((void *)&hostdata->msg_buf));
-		hostdata->dsp = hostdata->script + 
-		    hostdata->E_respond_message / sizeof(u32);
-		hostdata->dsp_changed = 1;
-	    }
-	    return SPECIFIC_INT_NOTHING;
-	}
-	/* Fall through to abort if we couldn't find a cmd, and 
-	   therefore a dsa structure to twiddle */
-    case A_int_msg_wdtr:
-	hostdata->dsp = hostdata->script + hostdata->E_reject_message /
-	    sizeof(u32);
-	hostdata->dsp_changed = 1;
-	return SPECIFIC_INT_NOTHING;
-    case A_int_err_unexpected_phase:
-	if (hostdata->options & OPTION_DEBUG_INTR) 
-	    printk ("scsi%d : unexpected phase\n", host->host_no);
-	return SPECIFIC_INT_ABORT;
-    case A_int_err_selected:
-	if ((hostdata->chip / 100) == 8)
-	    printk ("scsi%d : selected by target %d\n", host->host_no,
-	        (int) NCR53c7x0_read8(SDID_REG_800) &7);
-	else
-            printk ("scsi%d : selected by target LCRC=0x%02x\n", host->host_no,
-                (int) NCR53c7x0_read8(LCRC_REG_10));
-	hostdata->dsp = hostdata->script + hostdata->E_target_abort / 
-    	    sizeof(u32);
-	hostdata->dsp_changed = 1;
-	return SPECIFIC_INT_NOTHING;
-    case A_int_err_unexpected_reselect:
-	if ((hostdata->chip / 100) == 8)
-	    printk ("scsi%d : unexpected reselect by target %d lun %d\n", 
-	        host->host_no, (int) NCR53c7x0_read8(SDID_REG_800) & 7,
-	        hostdata->reselected_identify & 7);
-	else
-            printk ("scsi%d : unexpected reselect LCRC=0x%02x\n", host->host_no,
-                (int) NCR53c7x0_read8(LCRC_REG_10));
-	hostdata->dsp = hostdata->script + hostdata->E_initiator_abort /
-    	    sizeof(u32);
-	hostdata->dsp_changed = 1;
-	return SPECIFIC_INT_NOTHING;
-/*
- * Since contingent allegiance conditions are cleared by the next 
- * command issued to a target, we must issue a REQUEST SENSE 
- * command after receiving a CHECK CONDITION status, before
- * another command is issued.
- * 
- * Since this NCR53c7x0_cmd will be freed after use, we don't 
- * care if we step on the various fields, so modify a few things.
- */
-    case A_int_err_check_condition: 
-#if 0
-	if (hostdata->options & OPTION_DEBUG_INTR) 
-#endif
-	    printk ("scsi%d : CHECK CONDITION\n", host->host_no);
-	if (!c) {
-	    printk("scsi%d : CHECK CONDITION with no SCSI command\n",
-		host->host_no);
-	    return SPECIFIC_INT_PANIC;
-	}
-
-	/* 
-	 * FIXME : this uses the normal one-byte selection message.
-	 * 	We may want to renegotiate for synchronous & WIDE transfers
-	 * 	since these could be the crux of our problem.
-	 *
-	 hostdata->NOP_insn* FIXME : once SCSI-II tagged queuing is implemented, we'll
-	 * 	have to set this up so that the rest of the DSA
-	 *	agrees with this being an untagged queue'd command.
-	 */
-
-    	patch_dsa_32 (cmd->dsa, dsa_msgout, 0, 1);
-
-    	/* 
-    	 * Modify the table indirect for COMMAND OUT phase, since 
-    	 * Request Sense is a six byte command.
-    	 */
-
-    	patch_dsa_32 (cmd->dsa, dsa_cmdout, 0, 6);
-
-        /*
-         * The CDB is now mirrored in our local non-cached
-         * structure, but keep the old structure up to date as well,
-         * just in case anyone looks at it.
-         */
-
-	/*
-	 * XXX Need to worry about data buffer alignment/cache state
-	 * XXX here, but currently never get A_int_err_check_condition,
-	 * XXX so ignore problem for now.
-         */
-	cmd->cmnd[0] = c->cmnd[0] = REQUEST_SENSE;
-	cmd->cmnd[0] = c->cmnd[1] &= 0xe0;	/* Zero all but LUN */
-	cmd->cmnd[0] = c->cmnd[2] = 0;
-	cmd->cmnd[0] = c->cmnd[3] = 0;
-	cmd->cmnd[0] = c->cmnd[4] = sizeof(c->sense_buffer);
-	cmd->cmnd[0] = c->cmnd[5] = 0; 
-
-	/*
-	 * Disable dataout phase, and program datain to transfer to the 
-	 * sense buffer, and add a jump to other_transfer after the 
-    	 * command so overflow/underrun conditions are detected.
-	 */
-
-    	patch_dsa_32 (cmd->dsa, dsa_dataout, 0, 
-	    virt_to_bus(hostdata->script) + hostdata->E_other_transfer);
-    	patch_dsa_32 (cmd->dsa, dsa_datain, 0, 
-	    virt_to_bus(cmd->data_transfer_start));
-    	cmd->data_transfer_start[0] = (((DCMD_TYPE_BMI | DCMD_BMI_OP_MOVE_I | 
-    	    DCMD_BMI_IO)) << 24) | sizeof(c->sense_buffer);
-    	cmd->data_transfer_start[1] = (u32) virt_to_bus(c->sense_buffer);
-
-	cmd->data_transfer_start[2] = ((DCMD_TYPE_TCI | DCMD_TCI_OP_JUMP) 
-    	    << 24) | DBC_TCI_TRUE;
-	cmd->data_transfer_start[3] = (u32) virt_to_bus(hostdata->script) + 
-	    hostdata->E_other_transfer;
-
-    	/*
-    	 * Currently, this command is flagged as completed, ie 
-    	 * it has valid status and message data.  Reflag it as
-    	 * incomplete.  Q - need to do something so that original
-	 * status, etc are used.
-    	 */
-
-	cmd->result = cmd->cmd->result = 0xffff;		
-
-	/* 
-	 * Restart command as a REQUEST SENSE.
-	 */
-	hostdata->dsp = (u32 *) hostdata->script + hostdata->E_select /
-	    sizeof(u32);
-	hostdata->dsp_changed = 1;
-	return SPECIFIC_INT_NOTHING;
-    case A_int_debug_break:
-	return SPECIFIC_INT_BREAK;
-    case A_int_norm_aborted:
-	hostdata->dsp = (u32 *) hostdata->schedule;
-	hostdata->dsp_changed = 1;
-	if (cmd)
-	    abnormal_finished (cmd, DID_ERROR << 16);
-	return SPECIFIC_INT_NOTHING;
-    case A_int_norm_emulateintfly:
-	NCR53c7x0_intfly(host);
-	return SPECIFIC_INT_NOTHING;
-    case A_int_test_1:
-    case A_int_test_2:
-	hostdata->idle = 1;
-	hostdata->test_completed = (dsps - A_int_test_1) / 0x00010000 + 1;
-	if (hostdata->options & OPTION_DEBUG_INTR)
-	    printk("scsi%d : test%d complete\n", host->host_no,
-		hostdata->test_completed);
-	return SPECIFIC_INT_NOTHING;
-#ifdef A_int_debug_reselected_ok
-    case A_int_debug_reselected_ok:
-	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR|
-    	    	OPTION_DEBUG_DISCONNECT)) {
-	    /* 
-	     * Note - this dsa is not based on location relative to 
-	     * the command structure, but to location relative to the 
-	     * DSA register 
-	     */	
-	    u32 *dsa;
-	    dsa = (u32 *) bus_to_virt (NCR53c7x0_read32(DSA_REG));
-
-	    printk("scsi%d : reselected_ok (DSA = 0x%x (virt 0x%p)\n", 
-		host->host_no, NCR53c7x0_read32(DSA_REG), dsa);
-	    printk("scsi%d : resume address is 0x%x (virt 0x%p)\n",
-		    host->host_no, cmd->saved_data_pointer,
-		    bus_to_virt(cmd->saved_data_pointer));
-	    print_insn (host, hostdata->script + Ent_reselected_ok / 
-    	    	    sizeof(u32), "", 1);
-	    if ((hostdata->chip / 100) == 8)
-    	        printk ("scsi%d : sxfer=0x%x, scntl3=0x%x\n",
-		    host->host_no, NCR53c7x0_read8(SXFER_REG),
-		    NCR53c7x0_read8(SCNTL3_REG_800));
-	    else
-    	        printk ("scsi%d : sxfer=0x%x, cannot read SBCL\n",
-		    host->host_no, NCR53c7x0_read8(SXFER_REG));
-	    if (c) {
-		print_insn (host, (u32 *) 
-		    hostdata->sync[c->device->id].script, "", 1);
-		print_insn (host, (u32 *) 
-		    hostdata->sync[c->device->id].script + 2, "", 1);
-	    }
-	}
-    	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_reselect_check
-    case A_int_debug_reselect_check:
-	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
-	    u32 *dsa;
-#if 0
-	    u32 *code;
-#endif
-	    /* 
-	     * Note - this dsa is not based on location relative to 
-	     * the command structure, but to location relative to the 
-	     * DSA register 
-	     */	
-	    dsa = bus_to_virt (NCR53c7x0_read32(DSA_REG));
-	    printk("scsi%d : reselected_check_next (DSA = 0x%lx (virt 0x%p))\n",
-		host->host_no, virt_to_bus(dsa), dsa);
-	    if (dsa) {
-		printk("scsi%d : resume address is 0x%x (virt 0x%p)\n",
-		    host->host_no, cmd->saved_data_pointer,
-		    bus_to_virt (cmd->saved_data_pointer));
-#if 0
-		printk("scsi%d : template code :\n", host->host_no);
-		for (code = dsa + (Ent_dsa_code_check_reselect - Ent_dsa_zero) 
-		    / sizeof(u32); code < (dsa + Ent_dsa_zero / sizeof(u32)); 
-		    code += print_insn (host, code, "", 1));
-#endif
-	    }
-	    print_insn (host, hostdata->script + Ent_reselected_ok / 
-    	    	    sizeof(u32), "", 1);
-	}
-    	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_dsa_schedule
-    case A_int_debug_dsa_schedule:
-	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
-	    u32 *dsa;
-	    /* 
-	     * Note - this dsa is not based on location relative to 
-	     * the command structure, but to location relative to the 
-	     * DSA register 
-	     */	
-	    dsa = (u32 *) bus_to_virt (NCR53c7x0_read32(DSA_REG));
-	    printk("scsi%d : dsa_schedule (old DSA = 0x%lx (virt 0x%p))\n", 
-		host->host_no, virt_to_bus(dsa), dsa);
-	    if (dsa) 
-		printk("scsi%d : resume address is 0x%x (virt 0x%p)\n"
-		       "         (temp was 0x%x (virt 0x%p))\n",
-		    host->host_no, cmd->saved_data_pointer,
-		    bus_to_virt (cmd->saved_data_pointer),
-		    NCR53c7x0_read32 (TEMP_REG),
-		    bus_to_virt (NCR53c7x0_read32(TEMP_REG)));
-	}
-    	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_scheduled
-    case A_int_debug_scheduled:
-	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
-	    printk("scsi%d : new I/O 0x%x (virt 0x%p) scheduled\n", 
-		host->host_no, NCR53c7x0_read32(DSA_REG),
-	    	bus_to_virt(NCR53c7x0_read32(DSA_REG)));
-	}
-	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_idle
-    case A_int_debug_idle:
-	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
-	    printk("scsi%d : idle\n", host->host_no);
-	}
-	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_cmd
-    case A_int_debug_cmd:
-	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
-	    printk("scsi%d : command sent\n");
-	}
-    	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_dsa_loaded
-    case A_int_debug_dsa_loaded:
-	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
-	    printk("scsi%d : DSA loaded with 0x%x (virt 0x%p)\n", host->host_no,
-		NCR53c7x0_read32(DSA_REG), 
-		bus_to_virt(NCR53c7x0_read32(DSA_REG)));
-	}
-	return SPECIFIC_INT_RESTART; 
-#endif
-#ifdef A_int_debug_reselected
-    case A_int_debug_reselected:
-	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR|
-	    OPTION_DEBUG_DISCONNECT)) {
-	    if ((hostdata->chip / 100) == 8)
-		printk("scsi%d : reselected by target %d lun %d\n",
-		    host->host_no, (int) NCR53c7x0_read8(SDID_REG_800) & ~0x80, 
-		    (int) hostdata->reselected_identify & 7);
-	    else
-		printk("scsi%d : reselected by LCRC=0x%02x lun %d\n",
-                    host->host_no, (int) NCR53c7x0_read8(LCRC_REG_10),
-                    (int) hostdata->reselected_identify & 7);
-	    print_queues(host);
-	}
-    	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_disconnect_msg
-    case A_int_debug_disconnect_msg:
-	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
-	    if (c)
-		printk("scsi%d : target %d lun %d disconnecting\n", 
-		    host->host_no, c->device->id, c->device->lun);
-	    else
-		printk("scsi%d : unknown target disconnecting\n",
-		    host->host_no);
-	}
-	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_disconnected
-    case A_int_debug_disconnected:
-	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR|
-		OPTION_DEBUG_DISCONNECT)) {
-	    printk ("scsi%d : disconnected, new queues are\n", 
-		host->host_no);
-	    print_queues(host);
-#if 0
-	    /* Not valid on ncr53c710! */
-    	    printk ("scsi%d : sxfer=0x%x, scntl3=0x%x\n",
-		host->host_no, NCR53c7x0_read8(SXFER_REG),
-		NCR53c7x0_read8(SCNTL3_REG_800));
-#endif
-	    if (c) {
-		print_insn (host, (u32 *) 
-		    hostdata->sync[c->device->id].script, "", 1);
-		print_insn (host, (u32 *) 
-		    hostdata->sync[c->device->id].script + 2, "", 1);
-	    }
-	}
-	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_panic
-    case A_int_debug_panic:
-	printk("scsi%d : int_debug_panic received\n", host->host_no);
-	print_lots (host);
-	return SPECIFIC_INT_PANIC;
-#endif
-#ifdef A_int_debug_saved
-    case A_int_debug_saved:
-    	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR|
-    	    OPTION_DEBUG_DISCONNECT)) {
-    	    printk ("scsi%d : saved data pointer 0x%x (virt 0x%p)\n",
-    	    	host->host_no, cmd->saved_data_pointer,
-		bus_to_virt (cmd->saved_data_pointer));
-    	    print_progress (c);
-    	}
-    	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_restored
-    case A_int_debug_restored:
-    	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR|
-    	    OPTION_DEBUG_DISCONNECT)) {
-    	    if (cmd) {
-		int size;
-    	    	printk ("scsi%d : restored data pointer 0x%x (virt 0x%p)\n",
-    	    	    host->host_no, cmd->saved_data_pointer, bus_to_virt (
-		    cmd->saved_data_pointer));
-		size = print_insn (host, (u32 *) 
-		    bus_to_virt(cmd->saved_data_pointer), "", 1);
-		size = print_insn (host, (u32 *) 
-		    bus_to_virt(cmd->saved_data_pointer) + size, "", 1);
-    	    	print_progress (c);
-	    }
-#if 0
-	    printk ("scsi%d : datapath residual %d\n",
-		host->host_no, datapath_residual (host)) ;
-#endif
-    	}
-    	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_sync
-    case A_int_debug_sync:
-    	if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR|
-    	    OPTION_DEBUG_DISCONNECT|OPTION_DEBUG_SDTR)) {
-	    unsigned char sxfer = NCR53c7x0_read8 (SXFER_REG), scntl3;
-	    if ((hostdata->chip / 100) == 8) {
-		scntl3 = NCR53c7x0_read8 (SCNTL3_REG_800);
-		if (c) {
-		  if (sxfer != hostdata->sync[c->device->id].sxfer_sanity ||
-		    scntl3 != hostdata->sync[c->device->id].scntl3_sanity) {
-		   	printk ("scsi%d :  sync sanity check failed sxfer=0x%x, scntl3=0x%x",
-			    host->host_no, sxfer, scntl3);
-			NCR53c7x0_write8 (SXFER_REG, sxfer);
-			NCR53c7x0_write8 (SCNTL3_REG_800, scntl3);
-		    }
-		} else 
-    	    	  printk ("scsi%d : unknown command sxfer=0x%x, scntl3=0x%x\n",
-		    host->host_no, (int) sxfer, (int) scntl3);
-	    } else {
-		if (c) {
-		  if (sxfer != hostdata->sync[c->device->id].sxfer_sanity) {
-		   	printk ("scsi%d :  sync sanity check failed sxfer=0x%x",
-			    host->host_no, sxfer);
-			NCR53c7x0_write8 (SXFER_REG, sxfer);
-			NCR53c7x0_write8 (SBCL_REG,
-				hostdata->sync[c->device->id].sscf_710);
-		    }
-		} else 
-    	    	  printk ("scsi%d : unknown command sxfer=0x%x\n",
-		    host->host_no, (int) sxfer);
-	    }
-	}
-    	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_datain
-	case A_int_debug_datain:
-	    if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR|
-		OPTION_DEBUG_DISCONNECT|OPTION_DEBUG_SDTR)) {
-		int size;
-		if ((hostdata->chip / 100) == 8)
-		  printk ("scsi%d : In do_datain (%s) sxfer=0x%x, scntl3=0x%x\n"
-			"         datapath residual=%d\n",
-		    host->host_no, sbcl_to_phase (NCR53c7x0_read8 (SBCL_REG)),
-		    (int) NCR53c7x0_read8(SXFER_REG), 
-		    (int) NCR53c7x0_read8(SCNTL3_REG_800),
-		    datapath_residual (host)) ;
-		else
-		  printk ("scsi%d : In do_datain (%s) sxfer=0x%x\n"
-			"         datapath residual=%d\n",
-		    host->host_no, sbcl_to_phase (NCR53c7x0_read8 (SBCL_REG)),
-		    (int) NCR53c7x0_read8(SXFER_REG), 
-		    datapath_residual (host)) ;
-		print_insn (host, dsp, "", 1);
-		size = print_insn (host, (u32 *) bus_to_virt(dsp[1]), "", 1);
-		print_insn (host, (u32 *) bus_to_virt(dsp[1]) + size, "", 1);
-	   } 
-	return SPECIFIC_INT_RESTART;
-#endif
-#ifdef A_int_debug_check_dsa
-	case A_int_debug_check_dsa:
-	    if (NCR53c7x0_read8 (SCNTL1_REG) & SCNTL1_CON) {
-		int sdid;
-		int tmp;
-		char *where;
-		if (hostdata->chip / 100 == 8)
-		    sdid = NCR53c7x0_read8 (SDID_REG_800) & 15;
-		else {
-		    tmp = NCR53c7x0_read8 (SDID_REG_700);
-		    if (!tmp)
-			panic ("SDID_REG_700 = 0");
-		    tmp >>= 1;
-		    sdid = 0;
-		    while (tmp) {
-			tmp >>= 1;
-			sdid++;
-		    }
-		}
-		where = dsp - NCR53c7x0_insn_size(NCR53c7x0_read8 
-			(DCMD_REG)) == hostdata->script + 
-		    	Ent_select_check_dsa / sizeof(u32) ?
-		    "selection" : "reselection";
-		if (c && sdid != c->device->id) {
-		    printk ("scsi%d : SDID target %d != DSA target %d at %s\n",
-			host->host_no, sdid, c->device->id, where);
-		    print_lots(host);
-		    dump_events (host, 20);
-		    return SPECIFIC_INT_PANIC;
-		}
-	    }
-	    return SPECIFIC_INT_RESTART;
-#endif
-    default:
-	if ((dsps & 0xff000000) == 0x03000000) {
-	     printk ("scsi%d : misc debug interrupt 0x%x\n",
-		host->host_no, dsps);
-	    return SPECIFIC_INT_RESTART;
-	} else if ((dsps & 0xff000000) == 0x05000000) {
-	    if (hostdata->events) {
-		struct NCR53c7x0_event *event;
-		++hostdata->event_index;
-		if (hostdata->event_index >= hostdata->event_size)
-		    hostdata->event_index = 0;
-		event = (struct NCR53c7x0_event *) hostdata->events + 
-		    hostdata->event_index;
-		event->event = (enum ncr_event) dsps;
-		event->dsa = bus_to_virt(NCR53c7x0_read32(DSA_REG));
-		if (NCR53c7x0_read8 (SCNTL1_REG) & SCNTL1_CON) {
-		    if (hostdata->chip / 100 == 8)
-			event->target = NCR53c7x0_read8(SSID_REG_800);
-		    else {
-			unsigned char tmp, sdid;
-		        tmp = NCR53c7x0_read8 (SDID_REG_700);
-		        if (!tmp)
-			    panic ("SDID_REG_700 = 0");
-		        tmp >>= 1;
-		        sdid = 0;
-		        while (tmp) {
-			    tmp >>= 1;
-			    sdid++;
-		        }
-			event->target = sdid;
-		    }
-		}
-		else 
-			event->target = 255;
-
-		if (event->event == EVENT_RESELECT)
-		    event->lun = hostdata->reselected_identify & 0xf;
-		else if (c)
-		    event->lun = c->device->lun;
-		else
-		    event->lun = 255;
-		do_gettimeofday(&(event->time));
-		if (c) {
-		    event->pid = c->pid;
-		    memcpy ((void *) event->cmnd, (void *) c->cmnd, 
-			sizeof (event->cmnd));
-		} else {
-		    event->pid = -1;
-		}
-	    }
-	    return SPECIFIC_INT_RESTART;
-	}
-
-	printk ("scsi%d : unknown user interrupt 0x%x\n", 
-	    host->host_no, (unsigned) dsps);
-	return SPECIFIC_INT_PANIC;
-    }
-}
-
-/* 
- * XXX - the stock NCR assembler won't output the scriptu.h file,
- * which undefine's all #define'd CPP symbols from the script.h
- * file, which will create problems if you use multiple scripts
- * with the same  symbol names.
- *
- * If you insist on using NCR's assembler, you could generate
- * scriptu.h from script.h using something like 
- *
- * grep #define script.h | \
- * sed 's/#define[ 	][ 	]*\([_a-zA-Z][_a-zA-Z0-9]*\).*$/#undefine \1/' \
- * > scriptu.h
- */
-
-#include "53c7xx_u.h"
-
-/* XXX - add alternate script handling code here */
-
-
-/* 
- * Function : static void NCR537xx_soft_reset (struct Scsi_Host *host)
- *
- * Purpose :  perform a soft reset of the NCR53c7xx chip
- *
- * Inputs : host - pointer to this host adapter's structure
- *
- * Preconditions : NCR53c7x0_init must have been called for this 
- *      host.
- * 
- */
-
-static void 
-NCR53c7x0_soft_reset (struct Scsi_Host *host) {
-    NCR53c7x0_local_declare();
-    unsigned long flags;
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    NCR53c7x0_local_setup(host);
-
-    local_irq_save(flags);
-
-    /* Disable scsi chip and s/w level 7 ints */
-
-#ifdef CONFIG_MVME16x
-    if (MACH_IS_MVME16x)
-    {
-        volatile unsigned long v;
-
-        v = *(volatile unsigned long *)0xfff4006c;
-        v &= ~0x8000;
-        *(volatile unsigned long *)0xfff4006c = v;
-        v = *(volatile unsigned long *)0xfff4202c;
-        v &= ~0x10;
-        *(volatile unsigned long *)0xfff4202c = v;
-    }
-#endif
-    /* Anything specific for your hardware? */
-
-    /*
-     * Do a soft reset of the chip so that everything is 
-     * reinitialized to the power-on state.
-     *
-     * Basically follow the procedure outlined in the NCR53c700
-     * data manual under Chapter Six, How to Use, Steps Necessary to
-     * Start SCRIPTS, with the exception of actually starting the 
-     * script and setting up the synchronous transfer gunk.
-     */
-
-    /* Should we reset the scsi bus here??????????????????? */
-
-    NCR53c7x0_write8(ISTAT_REG_700, ISTAT_10_SRST);
-    NCR53c7x0_write8(ISTAT_REG_700, 0);
-
-    /*
-     * saved_dcntl is set up in NCR53c7x0_init() before it is overwritten
-     * here.  We should have some better way of working out the CF bit
-     * setting..
-     */
-
-    hostdata->saved_dcntl = DCNTL_10_EA|DCNTL_10_COM;
-    if (hostdata->scsi_clock > 50000000)
-	hostdata->saved_dcntl |= DCNTL_700_CF_3;
-    else
-    if (hostdata->scsi_clock > 37500000)
-        hostdata->saved_dcntl |= DCNTL_700_CF_2;
-#if 0
-    else
-	/* Any clocks less than 37.5MHz? */
-#endif
-
-    if (hostdata->options & OPTION_DEBUG_TRACE)
-    	NCR53c7x0_write8(DCNTL_REG, hostdata->saved_dcntl | DCNTL_SSM);
-    else
-    	NCR53c7x0_write8(DCNTL_REG, hostdata->saved_dcntl);
-    /* Following disables snooping - snooping is not required, as non-
-     * cached pages are used for shared data, and appropriate use is
-     * made of cache_push/cache_clear.  Indeed, for 68060
-     * enabling snooping causes disk corruption of ext2fs free block
-     * bitmaps and the like.  If you have a 68060 with snooping hardwared
-     * on, then you need to enable CONFIG_060_WRITETHROUGH.
-     */
-    NCR53c7x0_write8(CTEST7_REG, CTEST7_10_TT1|CTEST7_STD);
-    /* Actually burst of eight, according to my 53c710 databook */
-    NCR53c7x0_write8(hostdata->dmode, DMODE_10_BL_8 | DMODE_10_FC2);
-    NCR53c7x0_write8(SCID_REG, 1 << host->this_id);
-    NCR53c7x0_write8(SBCL_REG, 0);
-    NCR53c7x0_write8(SCNTL1_REG, SCNTL1_ESR_700);
-    NCR53c7x0_write8(SCNTL0_REG, ((hostdata->options & OPTION_PARITY) ? 
-            SCNTL0_EPC : 0) | SCNTL0_EPG_700 | SCNTL0_ARB1 | SCNTL0_ARB2);
-
-    /*
-     * Enable all interrupts, except parity which we only want when
-     * the user requests it.
-     */
-
-    NCR53c7x0_write8(DIEN_REG, DIEN_700_BF |
-		DIEN_ABRT | DIEN_SSI | DIEN_SIR | DIEN_700_OPC);
-
-    NCR53c7x0_write8(SIEN_REG_700, ((hostdata->options & OPTION_PARITY) ?
-	    SIEN_PAR : 0) | SIEN_700_STO | SIEN_RST | SIEN_UDC |
-		SIEN_SGE | SIEN_MA);
-
-#ifdef CONFIG_MVME16x
-    if (MACH_IS_MVME16x)
-    {
-        volatile unsigned long v;
-
-        /* Enable scsi chip and s/w level 7 ints */
-        v = *(volatile unsigned long *)0xfff40080;
-        v = (v & ~(0xf << 28)) | (4 << 28);
-        *(volatile unsigned long *)0xfff40080 = v;
-        v = *(volatile unsigned long *)0xfff4006c;
-        v |= 0x8000;
-        *(volatile unsigned long *)0xfff4006c = v;
-        v = *(volatile unsigned long *)0xfff4202c;
-        v = (v & ~0xff) | 0x10 | 4;
-        *(volatile unsigned long *)0xfff4202c = v;
-    }
-#endif
-    /* Anything needed for your hardware? */
-    local_irq_restore(flags);
-}
-
-
-/*
- * Function static struct NCR53c7x0_cmd *allocate_cmd (Scsi_Cmnd *cmd)
- * 
- * Purpose : Return the first free NCR53c7x0_cmd structure (which are 
- * 	reused in a LIFO manner to minimize cache thrashing).
- *
- * Side effects : If we haven't yet scheduled allocation of NCR53c7x0_cmd
- *	structures for this device, do so.  Attempt to complete all scheduled
- *	allocations using get_zeroed_page(), putting NCR53c7x0_cmd structures on
- *	the free list.  Teach programmers not to drink and hack.
- *
- * Inputs : cmd - SCSI command
- *
- * Returns : NCR53c7x0_cmd structure allocated on behalf of cmd;
- *	NULL on failure.
- */
-
-static void
-my_free_page (void *addr, int dummy)
-{
-    /* XXX This assumes default cache mode to be IOMAP_FULL_CACHING, which
-     * XXX may be invalid (CONFIG_060_WRITETHROUGH)
-     */
-    kernel_set_cachemode((void *)addr, 4096, IOMAP_FULL_CACHING);
-    free_page ((u32)addr);
-}
-
-static struct NCR53c7x0_cmd *
-allocate_cmd (Scsi_Cmnd *cmd) {
-    struct Scsi_Host *host = cmd->device->host;
-    struct NCR53c7x0_hostdata *hostdata = 
-	(struct NCR53c7x0_hostdata *) host->hostdata[0];
-    u32 real;			/* Real address */
-    int size;			/* Size of *tmp */
-    struct NCR53c7x0_cmd *tmp;
-    unsigned long flags;
-
-    if (hostdata->options & OPTION_DEBUG_ALLOCATION)
-	printk ("scsi%d : num_cmds = %d, can_queue = %d\n"
-		"         target = %d, lun = %d, %s\n",
-	    host->host_no, hostdata->num_cmds, host->can_queue,
-	    cmd->device->id, cmd->device->lun, (hostdata->cmd_allocated[cmd->device->id] &
-		(1 << cmd->device->lun)) ? "already allocated" : "not allocated");
-
-/*
- * If we have not yet reserved commands for this I_T_L nexus, and
- * the device exists (as indicated by permanent Scsi_Cmnd structures
- * being allocated under 1.3.x, or being outside of scan_scsis in
- * 1.2.x), do so now.
- */
-    if (!(hostdata->cmd_allocated[cmd->device->id] & (1 << cmd->device->lun)) &&
-				cmd->device && cmd->device->has_cmdblocks) {
-      if ((hostdata->extra_allocate + hostdata->num_cmds) < host->can_queue)
-          hostdata->extra_allocate += host->cmd_per_lun;
-      hostdata->cmd_allocated[cmd->device->id] |= (1 << cmd->device->lun);
-    }
-
-    for (; hostdata->extra_allocate > 0 ; --hostdata->extra_allocate, 
-    	++hostdata->num_cmds) {
-    /* historically, kmalloc has returned unaligned addresses; pad so we
-       have enough room to ROUNDUP */
-	size = hostdata->max_cmd_size + sizeof (void *);
-#ifdef FORCE_DSA_ALIGNMENT
-	/*
-	 * 53c710 rev.0 doesn't have an add-with-carry instruction.
-	 * Ensure we allocate enough memory to force alignment.
-	 */
-	size += 256;
-#endif
-/* FIXME: for ISA bus '7xx chips, we need to or GFP_DMA in here */
-
-        if (size > 4096) {
-            printk (KERN_ERR "53c7xx: allocate_cmd size > 4K\n");
-	    return NULL;
-	}
-        real = get_zeroed_page(GFP_ATOMIC);
-        if (real == 0)
-        	return NULL;
-        cache_push(virt_to_phys((void *)real), 4096);
-        cache_clear(virt_to_phys((void *)real), 4096);
-        kernel_set_cachemode((void *)real, 4096, IOMAP_NOCACHE_SER);
-	tmp = ROUNDUP(real, void *);
-#ifdef FORCE_DSA_ALIGNMENT
-	{
-	    if (((u32)tmp & 0xff) > CmdPageStart)
-		tmp = (struct NCR53c7x0_cmd *)((u32)tmp + 255);
-	    tmp = (struct NCR53c7x0_cmd *)(((u32)tmp & ~0xff) + CmdPageStart);
-#if 0
-	    printk ("scsi: size = %d, real = 0x%08x, tmp set to 0x%08x\n",
-			size, real, (u32)tmp);
-#endif
-	}
-#endif
-	tmp->real = (void *)real;
-	tmp->size = size;			
-	tmp->free = ((void (*)(void *, int)) my_free_page);
-	local_irq_save(flags);
-	tmp->next = hostdata->free;
-	hostdata->free = tmp;
-	local_irq_restore(flags);
-    }
-    local_irq_save(flags);
-    tmp = (struct NCR53c7x0_cmd *) hostdata->free;
-    if (tmp) {
-	hostdata->free = tmp->next;
-    }
-    local_irq_restore(flags);
-    if (!tmp)
-	printk ("scsi%d : can't allocate command for target %d lun %d\n",
-	    host->host_no, cmd->device->id, cmd->device->lun);
-    return tmp;
-}
-
-/*
- * Function static struct NCR53c7x0_cmd *create_cmd (Scsi_Cmnd *cmd) 
- *
- *
- * Purpose : allocate a NCR53c7x0_cmd structure, initialize it based on the 
- * 	Scsi_Cmnd structure passed in cmd, including dsa and Linux field 
- * 	initialization, and dsa code relocation.
- *
- * Inputs : cmd - SCSI command
- *
- * Returns : NCR53c7x0_cmd structure corresponding to cmd,
- *	NULL on failure.
- */
-static struct NCR53c7x0_cmd *
-create_cmd (Scsi_Cmnd *cmd) {
-    NCR53c7x0_local_declare();
-    struct Scsi_Host *host = cmd->device->host;
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-        host->hostdata[0];	
-    struct NCR53c7x0_cmd *tmp; 	/* NCR53c7x0_cmd structure for this command */
-    int datain,  		/* Number of instructions per phase */
-	dataout;
-    int data_transfer_instructions, /* Count of dynamic instructions */
-    	i;			/* Counter */
-    u32 *cmd_datain,		/* Address of datain/dataout code */
-	*cmd_dataout;		/* Incremented as we assemble */
-#ifdef notyet
-    unsigned char *msgptr;	/* Current byte in select message */
-    int msglen;			/* Length of whole select message */
-#endif
-    unsigned long flags;
-    u32 exp_select_indirect;	/* Used in sanity check */
-    NCR53c7x0_local_setup(cmd->device->host);
-
-    if (!(tmp = allocate_cmd (cmd)))
-	return NULL;
-
-    /*
-     * Copy CDB and initialised result fields from Scsi_Cmnd to NCR53c7x0_cmd.
-     * We do this because NCR53c7x0_cmd may have a special cache mode
-     * selected to cope with lack of bus snooping, etc.
-     */
-
-    memcpy(tmp->cmnd, cmd->cmnd, 12);
-    tmp->result = cmd->result;
-
-    /*
-     * Decide whether we need to generate commands for DATA IN,
-     * DATA OUT, neither, or both based on the SCSI command 
-     */
-
-    switch (cmd->cmnd[0]) {
-    /* These commands do DATA IN */
-    case INQUIRY:
-    case MODE_SENSE:
-    case READ_6:
-    case READ_10:
-    case READ_CAPACITY:
-    case REQUEST_SENSE:
-    case READ_BLOCK_LIMITS:
-    case READ_TOC:
-	datain = 2 * (cmd->use_sg ? cmd->use_sg : 1) + 3;
-    	dataout = 0;
-	break;
-    /* These commands do DATA OUT */
-    case MODE_SELECT: 
-    case WRITE_6:
-    case WRITE_10:
-#if 0
-	printk("scsi%d : command is ", host->host_no);
-	__scsi_print_command(cmd->cmnd);
-#endif
-#if 0
-	printk ("scsi%d : %d scatter/gather segments\n", host->host_no,
-	    cmd->use_sg);
-#endif
-    	datain = 0;
-	dataout = 2 * (cmd->use_sg ? cmd->use_sg : 1) + 3;
-#if 0
-	hostdata->options |= OPTION_DEBUG_INTR;
-#endif
-	break;
-    /* 
-     * These commands do no data transfer, we should force an
-     * interrupt if a data phase is attempted on them.
-     */
-    case TEST_UNIT_READY:
-    case ALLOW_MEDIUM_REMOVAL:
-    case START_STOP:
-    	datain = dataout = 0;
-	break;
-    /*
-     * We don't know about these commands, so generate code to handle
-     * both DATA IN and DATA OUT phases.  More efficient to identify them
-     * and add them to the above cases.
-     */
-    default:
-	printk("scsi%d : datain+dataout for command ", host->host_no);
-	__scsi_print_command(cmd->cmnd);
-	datain = dataout = 2 * (cmd->use_sg ? cmd->use_sg : 1) + 3;
-    }
-
-    /*
-     * New code : so that active pointers work correctly regardless
-     * 	of where the saved data pointer is at, we want to immediately
-     * 	enter the dynamic code after selection, and on a non-data
-     * 	phase perform a CALL to the non-data phase handler, with
-     * 	returns back to this address.
-     *
-     * 	If a phase mismatch is encountered in the middle of a 
-     * 	Block MOVE instruction, we want to _leave_ that instruction
-     *	unchanged as the current case is, modify a temporary buffer,
-     *	and point the active pointer (TEMP) at that.
-     *
-     * 	Furthermore, we want to implement a saved data pointer, 
-     * 	set by the SAVE_DATA_POINTERs message.
-     *
-     * 	So, the data transfer segments will change to 
-     *		CALL data_transfer, WHEN NOT data phase
-     *		MOVE x, x, WHEN data phase
-     *		( repeat )
-     *		JUMP other_transfer
-     */
-
-    data_transfer_instructions = datain + dataout;
-
-    /*
-     * When we perform a request sense, we overwrite various things,
-     * including the data transfer code.  Make sure we have enough
-     * space to do that.
-     */
-
-    if (data_transfer_instructions < 2)
-    	data_transfer_instructions = 2;
-
-
-    /*
-     * The saved data pointer is set up so that a RESTORE POINTERS message 
-     * will start the data transfer over at the beginning.
-     */
-
-    tmp->saved_data_pointer = virt_to_bus (hostdata->script) + 
-	hostdata->E_data_transfer;
-
-    /*
-     * Initialize Linux specific fields.
-     */
-
-    tmp->cmd = cmd;
-    tmp->next = NULL;
-    tmp->flags = 0;
-    tmp->dsa_next_addr = virt_to_bus(tmp->dsa) + hostdata->dsa_next - 
-	hostdata->dsa_start;
-    tmp->dsa_addr = virt_to_bus(tmp->dsa) - hostdata->dsa_start;
-
-    /* 
-     * Calculate addresses of dynamic code to fill in DSA
-     */
-
-    tmp->data_transfer_start = tmp->dsa + (hostdata->dsa_end - 
-    	hostdata->dsa_start) / sizeof(u32);
-    tmp->data_transfer_end = tmp->data_transfer_start + 
-    	2 * data_transfer_instructions;
-
-    cmd_datain = datain ? tmp->data_transfer_start : NULL;
-    cmd_dataout = dataout ? (datain ? cmd_datain + 2 * datain : tmp->
-    	data_transfer_start) : NULL;
-
-    /*
-     * Fill in the NCR53c7x0_cmd structure as follows
-     * dsa, with fixed up DSA code
-     * datain code
-     * dataout code
-     */
-
-    /* Copy template code into dsa and perform all necessary fixups */
-    if (hostdata->dsa_fixup)
-    	hostdata->dsa_fixup(tmp);
-
-    patch_dsa_32(tmp->dsa, dsa_next, 0, 0);
-    /*
-     * XXX is this giving 53c710 access to the Scsi_Cmnd in some way?
-     * Do we need to change it for caching reasons?
-     */
-    patch_dsa_32(tmp->dsa, dsa_cmnd, 0, virt_to_bus(cmd));
-
-    if (hostdata->options & OPTION_DEBUG_SYNCHRONOUS) {
-
-	exp_select_indirect = ((1 << cmd->device->id) << 16) |
-			(hostdata->sync[cmd->device->id].sxfer_sanity << 8);
-
-	if (hostdata->sync[cmd->device->id].select_indirect !=
-				exp_select_indirect) {
-	    printk ("scsi%d :  sanity check failed select_indirect=0x%x\n",
-		host->host_no, hostdata->sync[cmd->device->id].select_indirect);
-	    FATAL(host);
-
-	}
-    }
-
-    patch_dsa_32(tmp->dsa, dsa_select, 0,
-		hostdata->sync[cmd->device->id].select_indirect);
-
-    /*
-     * Right now, we'll do the WIDE and SYNCHRONOUS negotiations on
-     * different commands; although it should be trivial to do them
-     * both at the same time.
-     */
-    if (hostdata->initiate_wdtr & (1 << cmd->device->id)) {
-	memcpy ((void *) (tmp->select + 1), (void *) wdtr_message,
-	    sizeof(wdtr_message));
-    	patch_dsa_32(tmp->dsa, dsa_msgout, 0, 1 + sizeof(wdtr_message));
-	local_irq_save(flags);
-	hostdata->initiate_wdtr &= ~(1 << cmd->device->id);
-	local_irq_restore(flags);
-    } else if (hostdata->initiate_sdtr & (1 << cmd->device->id)) {
-	memcpy ((void *) (tmp->select + 1), (void *) sdtr_message, 
-	    sizeof(sdtr_message));
-    	patch_dsa_32(tmp->dsa, dsa_msgout, 0, 1 + sizeof(sdtr_message));
-	tmp->flags |= CMD_FLAG_SDTR;
-	local_irq_save(flags);
-	hostdata->initiate_sdtr &= ~(1 << cmd->device->id);
-	local_irq_restore(flags);
-    
-    }
-#if 1
-    else if (!(hostdata->talked_to & (1 << cmd->device->id)) &&
-		!(hostdata->options & OPTION_NO_ASYNC)) {
-
-	memcpy ((void *) (tmp->select + 1), (void *) async_message, 
-	    sizeof(async_message));
-    	patch_dsa_32(tmp->dsa, dsa_msgout, 0, 1 + sizeof(async_message));
-	tmp->flags |= CMD_FLAG_SDTR;
-    } 
-#endif
-    else 
-    	patch_dsa_32(tmp->dsa, dsa_msgout, 0, 1);
-
-    hostdata->talked_to |= (1 << cmd->device->id);
-    tmp->select[0] = (hostdata->options & OPTION_DISCONNECT) ? 
-	IDENTIFY (1, cmd->device->lun) : IDENTIFY (0, cmd->device->lun);
-    patch_dsa_32(tmp->dsa, dsa_msgout, 1, virt_to_bus(tmp->select));
-    patch_dsa_32(tmp->dsa, dsa_cmdout, 0, cmd->cmd_len);
-    patch_dsa_32(tmp->dsa, dsa_cmdout, 1, virt_to_bus(tmp->cmnd));
-    patch_dsa_32(tmp->dsa, dsa_dataout, 0, cmd_dataout ? 
-    	    virt_to_bus (cmd_dataout)
-	: virt_to_bus (hostdata->script) + hostdata->E_other_transfer);
-    patch_dsa_32(tmp->dsa, dsa_datain, 0, cmd_datain ? 
-    	    virt_to_bus (cmd_datain) 
-	: virt_to_bus (hostdata->script) + hostdata->E_other_transfer);
-    /* 
-     * XXX - need to make endian aware, should use separate variables
-     * for both status and message bytes.
-     */
-    patch_dsa_32(tmp->dsa, dsa_msgin, 0, 1);
-/* 
- * FIXME : these only works for little endian.  We probably want to 
- * 	provide message and status fields in the NCR53c7x0_cmd 
- *	structure, and assign them to cmd->result when we're done.
- */
-#ifdef BIG_ENDIAN
-    patch_dsa_32(tmp->dsa, dsa_msgin, 1, virt_to_bus(&tmp->result) + 2);
-    patch_dsa_32(tmp->dsa, dsa_status, 0, 1);
-    patch_dsa_32(tmp->dsa, dsa_status, 1, virt_to_bus(&tmp->result) + 3);
-#else
-    patch_dsa_32(tmp->dsa, dsa_msgin, 1, virt_to_bus(&tmp->result) + 1);
-    patch_dsa_32(tmp->dsa, dsa_status, 0, 1);
-    patch_dsa_32(tmp->dsa, dsa_status, 1, virt_to_bus(&tmp->result));
-#endif
-    patch_dsa_32(tmp->dsa, dsa_msgout_other, 0, 1);
-    patch_dsa_32(tmp->dsa, dsa_msgout_other, 1, 
-	virt_to_bus(&(hostdata->NCR53c7xx_msg_nop)));
-    
-    /*
-     * Generate code for zero or more of the DATA IN, DATA OUT phases 
-     * in the format 
-     *
-     * CALL data_transfer, WHEN NOT phase
-     * MOVE first buffer length, first buffer address, WHEN phase
-     * ...
-     * MOVE last buffer length, last buffer address, WHEN phase
-     * JUMP other_transfer
-     */
-
-/* 
- * See if we're getting to data transfer by generating an unconditional 
- * interrupt.
- */
-#if 0
-    if (datain) {
-	cmd_datain[0] = 0x98080000;
-	cmd_datain[1] = 0x03ffd00d;
-	cmd_datain += 2;
-    }
-#endif
-
-/* 
- * XXX - I'm undecided whether all of this nonsense is faster
- * in the long run, or whether I should just go and implement a loop
- * on the NCR chip using table indirect mode?
- *
- * In any case, this is how it _must_ be done for 53c700/700-66 chips,
- * so this stays even when we come up with something better.
- *
- * When we're limited to 1 simultaneous command, no overlapping processing,
- * we're seeing 630K/sec, with 7% CPU usage on a slow Syquest 45M
- * drive.
- *
- * Not bad, not good. We'll see.
- */
-
-    tmp->bounce.len = 0;	/* Assume aligned buffer */
-
-    for (i = 0; cmd->use_sg ? (i < cmd->use_sg) : !i; cmd_datain += 4, 
-	cmd_dataout += 4, ++i) {
-	u32 vbuf = cmd->use_sg
-	    ? (u32)page_address(((struct scatterlist *)cmd->request_buffer)[i].page)+
-	      ((struct scatterlist *)cmd->request_buffer)[i].offset
-	    : (u32)(cmd->request_buffer);
-	u32 bbuf = virt_to_bus((void *)vbuf);
-	u32 count = cmd->use_sg ?
-	    ((struct scatterlist *)cmd->request_buffer)[i].length :
-	    cmd->request_bufflen;
-
-	/*
-	 * If we have buffers which are not aligned with 16 byte cache
-	 * lines, then we just hope nothing accesses the other parts of
-	 * those cache lines while the transfer is in progress.  That would
-	 * fill the cache, and subsequent reads of the dma data would pick
-	 * up the wrong thing.
-	 * XXX We need a bounce buffer to handle that correctly.
-	 */
-
-	if (((bbuf & 15) || (count & 15)) && (datain || dataout))
-	{
-	    /* Bounce buffer needed */
-	    if (cmd->use_sg)
-		printk ("53c7xx: Non-aligned buffer with use_sg\n");
-	    else if (datain && dataout)
-                printk ("53c7xx: Non-aligned buffer with datain && dataout\n");
-            else if (count > 256)
-		printk ("53c7xx: Non-aligned transfer > 256 bytes\n");
-	    else
-	    {
-		    if (datain)
-		    {
-			tmp->bounce.len = count;
-			tmp->bounce.addr = vbuf;
-			bbuf = virt_to_bus(tmp->bounce.buf);
-			tmp->bounce.buf[0] = 0xff;
-			tmp->bounce.buf[1] = 0xfe;
-			tmp->bounce.buf[2] = 0xfd;
-			tmp->bounce.buf[3] = 0xfc;
-	    	    }
-	    	    if (dataout)
-	    	    {
-			memcpy ((void *)tmp->bounce.buf, (void *)vbuf, count);
-			bbuf = virt_to_bus(tmp->bounce.buf);
-		    }
-	    }
-	}
-
-	if (datain) {
-            cache_clear(virt_to_phys((void *)vbuf), count);
-	    /* CALL other_in, WHEN NOT DATA_IN */  
-	    cmd_datain[0] = ((DCMD_TYPE_TCI | DCMD_TCI_OP_CALL | 
-		DCMD_TCI_IO) << 24) | 
-		DBC_TCI_WAIT_FOR_VALID | DBC_TCI_COMPARE_PHASE;
-	    cmd_datain[1] = virt_to_bus (hostdata->script) + 
-		hostdata->E_other_in;
-	    /* MOVE count, buf, WHEN DATA_IN */
-	    cmd_datain[2] = ((DCMD_TYPE_BMI | DCMD_BMI_OP_MOVE_I | DCMD_BMI_IO) 
-    	    	<< 24) | count;
-	    cmd_datain[3] = bbuf;
-#if 0
-	    print_insn (host, cmd_datain, "dynamic ", 1);
-	    print_insn (host, cmd_datain + 2, "dynamic ", 1);
-#endif
-	}
-	if (dataout) {
-            cache_push(virt_to_phys((void *)vbuf), count);
-	    /* CALL other_out, WHEN NOT DATA_OUT */
-	    cmd_dataout[0] = ((DCMD_TYPE_TCI | DCMD_TCI_OP_CALL) << 24) | 
-		DBC_TCI_WAIT_FOR_VALID | DBC_TCI_COMPARE_PHASE;
-	    cmd_dataout[1] = virt_to_bus(hostdata->script) + 
-    	    	hostdata->E_other_out;
-	    /* MOVE count, buf, WHEN DATA+OUT */
-	    cmd_dataout[2] = ((DCMD_TYPE_BMI | DCMD_BMI_OP_MOVE_I) << 24) 
-		| count;
-	    cmd_dataout[3] = bbuf;
-#if 0
-	    print_insn (host, cmd_dataout, "dynamic ", 1);
-	    print_insn (host, cmd_dataout + 2, "dynamic ", 1);
-#endif
-	}
-    }
-
-    /*
-     * Install JUMP instructions after the data transfer routines to return
-     * control to the do_other_transfer routines.
-     */
-  
-    
-    if (datain) {
-	cmd_datain[0] = ((DCMD_TYPE_TCI | DCMD_TCI_OP_JUMP) << 24) |
-    	    DBC_TCI_TRUE;
-	cmd_datain[1] = virt_to_bus(hostdata->script) + 
-    	    hostdata->E_other_transfer;
-#if 0
-	print_insn (host, cmd_datain, "dynamic jump ", 1);
-#endif
-	cmd_datain += 2; 
-    }
-#if 0
-    if (datain) {
-	cmd_datain[0] = 0x98080000;
-	cmd_datain[1] = 0x03ffdeed;
-	cmd_datain += 2;
-    }
-#endif
-    if (dataout) {
-	cmd_dataout[0] = ((DCMD_TYPE_TCI | DCMD_TCI_OP_JUMP) << 24) |
-    	    DBC_TCI_TRUE;
-	cmd_dataout[1] = virt_to_bus(hostdata->script) + 
-    	    hostdata->E_other_transfer;
-#if 0
-	print_insn (host, cmd_dataout, "dynamic jump ", 1);
-#endif
-	cmd_dataout += 2;
-    }
-
-    return tmp;
-}
-
-/*
- * Function : int NCR53c7xx_queue_command (Scsi_Cmnd *cmd,
- *      void (*done)(Scsi_Cmnd *))
- *
- * Purpose :  enqueues a SCSI command
- *
- * Inputs : cmd - SCSI command, done - function called on completion, with
- *      a pointer to the command descriptor.
- *
- * Returns : 0
- *
- * Side effects :
- *      cmd is added to the per instance driver issue_queue, with major
- *      twiddling done to the host specific fields of cmd.  If the
- *      process_issue_queue coroutine isn't running, it is restarted.
- * 
- * NOTE : we use the host_scribble field of the Scsi_Cmnd structure to 
- *	hold our own data, and pervert the ptr field of the SCp field
- *	to create a linked list.
- */
-
-int
-NCR53c7xx_queue_command (Scsi_Cmnd *cmd, void (* done)(Scsi_Cmnd *)) {
-    struct Scsi_Host *host = cmd->device->host;
-    struct NCR53c7x0_hostdata *hostdata = 
-	(struct NCR53c7x0_hostdata *) host->hostdata[0];
-    unsigned long flags;
-    Scsi_Cmnd *tmp;
-
-    cmd->scsi_done = done;
-    cmd->host_scribble = NULL;
-    cmd->SCp.ptr = NULL;
-    cmd->SCp.buffer = NULL;
-
-#ifdef VALID_IDS
-    /* Ignore commands on invalid IDs */
-    if (!hostdata->valid_ids[cmd->device->id]) {
-        printk("scsi%d : ignoring target %d lun %d\n", host->host_no,
-            cmd->device->id, cmd->device->lun);
-        cmd->result = (DID_BAD_TARGET << 16);
-        done(cmd);
-        return 0;
-    }
-#endif
-
-    local_irq_save(flags);
-    if ((hostdata->options & (OPTION_DEBUG_INIT_ONLY|OPTION_DEBUG_PROBE_ONLY)) 
-	|| ((hostdata->options & OPTION_DEBUG_TARGET_LIMIT) &&
-	    !(hostdata->debug_lun_limit[cmd->device->id] & (1 << cmd->device->lun)))
-#ifdef LINUX_1_2
-	|| cmd->device->id > 7
-#else
-	|| cmd->device->id >= host->max_id
-#endif
-	|| cmd->device->id == host->this_id
-	|| hostdata->state == STATE_DISABLED) {
-	printk("scsi%d : disabled or bad target %d lun %d\n", host->host_no,
-	    cmd->device->id, cmd->device->lun);
-	cmd->result = (DID_BAD_TARGET << 16);
-	done(cmd);
-	local_irq_restore(flags);
-	return 0;
-    }
-
-    if ((hostdata->options & OPTION_DEBUG_NCOMMANDS_LIMIT) &&
-	(hostdata->debug_count_limit == 0)) {
-	printk("scsi%d : maximum commands exceeded\n", host->host_no);
-	cmd->result = (DID_BAD_TARGET << 16);
-	done(cmd);
-	local_irq_restore(flags);
-	return 0;
-    }
-
-    if (hostdata->options & OPTION_DEBUG_READ_ONLY) {
-	switch (cmd->cmnd[0]) {
-	case WRITE_6:
-	case WRITE_10:
-	    printk("scsi%d : WRITE attempted with NO_WRITE debugging flag set\n",
-		host->host_no);
-	    cmd->result = (DID_BAD_TARGET << 16);
-	    done(cmd);
-	    local_irq_restore(flags);
-	    return 0;
-	}
-    }
-
-    if ((hostdata->options & OPTION_DEBUG_TARGET_LIMIT) &&
-	    hostdata->debug_count_limit != -1) 
-	--hostdata->debug_count_limit;
-
-    cmd->result = 0xffff;	/* The NCR will overwrite message
-				       and status with valid data */
-    cmd->host_scribble = (unsigned char *) tmp = create_cmd (cmd);
-
-    /*
-     * REQUEST SENSE commands are inserted at the head of the queue 
-     * so that we do not clear the contingent allegiance condition
-     * they may be looking at.
-     */
-
-    if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
-	cmd->SCp.ptr = (unsigned char *) hostdata->issue_queue;
-	hostdata->issue_queue = cmd;
-    } else {
-	for (tmp = (Scsi_Cmnd *) hostdata->issue_queue; tmp->SCp.ptr; 
-		tmp = (Scsi_Cmnd *) tmp->SCp.ptr);
-	tmp->SCp.ptr = (unsigned char *) cmd;
-    }
-    local_irq_restore(flags);
-    run_process_issue_queue();
-    return 0;
-}
-
-/*
- * Function : void to_schedule_list (struct Scsi_Host *host,
- * 	struct NCR53c7x0_hostdata * hostdata, Scsi_Cmnd *cmd)
- *
- * Purpose : takes a SCSI command which was just removed from the 
- *	issue queue, and deals with it by inserting it in the first
- *	free slot in the schedule list or by terminating it immediately.
- *
- * Inputs : 
- *	host - SCSI host adapter; hostdata - hostdata structure for 
- *	this adapter; cmd - a pointer to the command; should have 
- *	the host_scribble field initialized to point to a valid 
- *	
- * Side effects : 
- *      cmd is added to the per instance schedule list, with minor 
- *      twiddling done to the host specific fields of cmd.
- *
- */
-
-static __inline__ void
-to_schedule_list (struct Scsi_Host *host, struct NCR53c7x0_hostdata *hostdata,
-    struct NCR53c7x0_cmd *cmd) {
-    NCR53c7x0_local_declare();
-    Scsi_Cmnd *tmp = cmd->cmd;
-    unsigned long flags;
-    /* dsa start is negative, so subtraction is used */
-    volatile u32 *ncrcurrent;
-
-    int i;
-    NCR53c7x0_local_setup(host);
-#if 0
-    printk("scsi%d : new dsa is 0x%lx (virt 0x%p)\n", host->host_no, 
-	virt_to_bus(hostdata->dsa), hostdata->dsa);
-#endif
-
-    local_irq_save(flags);
-    
-    /* 
-     * Work around race condition : if an interrupt fired and we 
-     * got disabled forget about this command.
-     */
-
-    if (hostdata->state == STATE_DISABLED) {
-	printk("scsi%d : driver disabled\n", host->host_no);
-	tmp->result = (DID_BAD_TARGET << 16);
-	cmd->next = (struct NCR53c7x0_cmd *) hostdata->free;
-	hostdata->free = cmd;
-	tmp->scsi_done(tmp);
-	local_irq_restore(flags);
-	return;
-    }
-
-    for (i = host->can_queue, ncrcurrent = hostdata->schedule; 
-	i > 0  && ncrcurrent[0] != hostdata->NOP_insn;
-	--i, ncrcurrent += 2 /* JUMP instructions are two words */);
-
-    if (i > 0) {
-	++hostdata->busy[tmp->device->id][tmp->device->lun];
-	cmd->next = hostdata->running_list;
-	hostdata->running_list = cmd;
-
-	/* Restore this instruction to a NOP once the command starts */
-	cmd->dsa [(hostdata->dsa_jump_dest - hostdata->dsa_start) / 
-	    sizeof(u32)] = (u32) virt_to_bus ((void *)ncrcurrent);
-	/* Replace the current jump operand.  */
-	ncrcurrent[1] =
-	    virt_to_bus ((void *) cmd->dsa) + hostdata->E_dsa_code_begin -
-	    hostdata->E_dsa_code_template;
-	/* Replace the NOP instruction with a JUMP */
-	ncrcurrent[0] = ((DCMD_TYPE_TCI|DCMD_TCI_OP_JUMP) << 24) |
-	    DBC_TCI_TRUE;
-    }  else {
-	printk ("scsi%d: no free slot\n", host->host_no);
-	disable(host);
-	tmp->result = (DID_ERROR << 16);
-	cmd->next = (struct NCR53c7x0_cmd *) hostdata->free;
-	hostdata->free = cmd;
-	tmp->scsi_done(tmp);
-	local_irq_restore(flags);
-	return;
-    }
-
-    /* 
-     * If the NCR chip is in an idle state, start it running the scheduler
-     * immediately.  Otherwise, signal the chip to jump to schedule as 
-     * soon as it is idle.
-     */
-
-    if (hostdata->idle) {
-	hostdata->idle = 0;
-	hostdata->state = STATE_RUNNING;
-	NCR53c7x0_write32 (DSP_REG,  virt_to_bus ((void *)hostdata->schedule));
-	if (hostdata->options & OPTION_DEBUG_TRACE)
-	    NCR53c7x0_write8 (DCNTL_REG, hostdata->saved_dcntl |
-				DCNTL_SSM | DCNTL_STD);
-    } else {
-	NCR53c7x0_write8(hostdata->istat, ISTAT_10_SIGP);
-    }
-
-    local_irq_restore(flags);
-}
-
-/*
- * Function : busyp (struct Scsi_Host *host, struct NCR53c7x0_hostdata 
- *	*hostdata, Scsi_Cmnd *cmd)
- *
- * Purpose : decide if we can pass the given SCSI command on to the 
- *	device in question or not.
- *  
- * Returns : non-zero when we're busy, 0 when we aren't.
- */
-
-static __inline__ int
-busyp (struct Scsi_Host *host, struct NCR53c7x0_hostdata *hostdata, 
-    Scsi_Cmnd *cmd) {
-    /* FIXME : in the future, this needs to accommodate SCSI-II tagged
-       queuing, and we may be able to play with fairness here a bit.
-     */
-    return hostdata->busy[cmd->device->id][cmd->device->lun];
-}
-
-/*
- * Function : process_issue_queue (void)
- *
- * Purpose : transfer commands from the issue queue to NCR start queue 
- *	of each NCR53c7/8xx in the system, avoiding kernel stack 
- *	overflows when the scsi_done() function is invoked recursively.
- * 
- * NOTE : process_issue_queue exits with interrupts *disabled*, so the 
- *	caller must reenable them if it desires.
- * 
- * NOTE : process_issue_queue should be called from both 
- *	NCR53c7x0_queue_command() and from the interrupt handler 
- *	after command completion in case NCR53c7x0_queue_command()
- * 	isn't invoked again but we've freed up resources that are
- *	needed.
- */
-
-static void 
-process_issue_queue (unsigned long flags) {
-    Scsi_Cmnd *tmp, *prev;
-    struct Scsi_Host *host;
-    struct NCR53c7x0_hostdata *hostdata;
-    int done;
-
-    /*
-     * We run (with interrupts disabled) until we're sure that none of 
-     * the host adapters have anything that can be done, at which point 
-     * we set process_issue_queue_running to 0 and exit.
-     *
-     * Interrupts are enabled before doing various other internal 
-     * instructions, after we've decided that we need to run through
-     * the loop again.
-     *
-     */
-
-    do {
-	local_irq_disable(); /* Freeze request queues */
-	done = 1;
-	for (host = first_host; host && host->hostt == the_template;
-	    host = host->next) {
-	    hostdata = (struct NCR53c7x0_hostdata *) host->hostdata[0];
-	    local_irq_disable();
-	    if (hostdata->issue_queue) {
-	    	if (hostdata->state == STATE_DISABLED) {
-		    tmp = (Scsi_Cmnd *) hostdata->issue_queue;
-		    hostdata->issue_queue = (Scsi_Cmnd *) tmp->SCp.ptr;
-		    tmp->result = (DID_BAD_TARGET << 16);
-		    if (tmp->host_scribble) {
-			((struct NCR53c7x0_cmd *)tmp->host_scribble)->next = 
-			    hostdata->free;
-			hostdata->free = 
-			    (struct NCR53c7x0_cmd *)tmp->host_scribble;
-			tmp->host_scribble = NULL;
-		    }
-		    tmp->scsi_done (tmp);
-		    done = 0;
-		} else 
-		    for (tmp = (Scsi_Cmnd *) hostdata->issue_queue, 
-			prev = NULL; tmp; prev = tmp, tmp = (Scsi_Cmnd *) 
-			tmp->SCp.ptr) 
-			if (!tmp->host_scribble || 
-			    !busyp (host, hostdata, tmp)) {
-				if (prev)
-				    prev->SCp.ptr = tmp->SCp.ptr;
-				else
-				    hostdata->issue_queue = (Scsi_Cmnd *) 
-					tmp->SCp.ptr;
-			    tmp->SCp.ptr = NULL;
-			    if (tmp->host_scribble) {
-				if (hostdata->options & OPTION_DEBUG_QUEUES) 
-				    printk ("scsi%d : moving command for target %d lun %d to start list\n",
-					host->host_no, tmp->device->id, tmp->device->lun);
-		
-
-			    	to_schedule_list (host, hostdata, 
-				    (struct NCR53c7x0_cmd *)
-				    tmp->host_scribble);
-			    } else {
-				if (((tmp->result & 0xff) == 0xff) ||
-			    	    ((tmp->result & 0xff00) == 0xff00)) {
-				    printk ("scsi%d : danger Will Robinson!\n",
-					host->host_no);
-				    tmp->result = DID_ERROR << 16;
-				    disable (host);
-				}
-				tmp->scsi_done(tmp);
-			    }
-			    done = 0;
-			} /* if target/lun is not busy */
-	    } /* if hostdata->issue_queue */
-	    if (!done)
-		local_irq_restore(flags);
-    	} /* for host */
-    } while (!done);
-    process_issue_queue_running = 0;
-}
-
-/*
- * Function : static void intr_scsi (struct Scsi_Host *host, 
- * 	struct NCR53c7x0_cmd *cmd)
- *
- * Purpose : handle all SCSI interrupts, indicated by the setting 
- * 	of the SIP bit in the ISTAT register.
- *
- * Inputs : host, cmd - host and NCR command causing the interrupt, cmd
- * 	may be NULL.
- */
-
-static void 
-intr_scsi (struct Scsi_Host *host, struct NCR53c7x0_cmd *cmd) {
-    NCR53c7x0_local_declare();
-    struct NCR53c7x0_hostdata *hostdata = 
-    	(struct NCR53c7x0_hostdata *) host->hostdata[0];
-    unsigned char sstat0_sist0, sist1, 		/* Registers */
-	    fatal; 				/* Did a fatal interrupt 
-						   occur ? */
-   
-    NCR53c7x0_local_setup(host);
-
-    fatal = 0;
-
-    sstat0_sist0 = NCR53c7x0_read8(SSTAT0_REG);
-    sist1 = 0;
-
-    if (hostdata->options & OPTION_DEBUG_INTR) 
-	printk ("scsi%d : SIST0 0x%0x, SIST1 0x%0x\n", host->host_no,
-	    sstat0_sist0, sist1);
-
-    /* 250ms selection timeout */
-    if (sstat0_sist0 & SSTAT0_700_STO) {
-	fatal = 1;
-	if (hostdata->options & OPTION_DEBUG_INTR) {
-	    printk ("scsi%d : Selection Timeout\n", host->host_no);
-    	    if (cmd) {
-    	    	printk("scsi%d : target %d, lun %d, command ",
-		    host->host_no, cmd->cmd->device->id, cmd->cmd->device->lun);
-    	    	__scsi_print_command (cmd->cmd->cmnd);
-		printk("scsi%d : dsp = 0x%x (virt 0x%p)\n", host->host_no,
-		    NCR53c7x0_read32(DSP_REG),
-		    bus_to_virt(NCR53c7x0_read32(DSP_REG)));
-    	    } else {
-    	    	printk("scsi%d : no command\n", host->host_no);
-    	    }
-    	}
-/*
- * XXX - question : how do we want to handle the Illegal Instruction
- * 	interrupt, which may occur before or after the Selection Timeout
- * 	interrupt?
- */
-
-	if (1) {
-	    hostdata->idle = 1;
-	    hostdata->expecting_sto = 0;
-
-	    if (hostdata->test_running) {
-		hostdata->test_running = 0;
-		hostdata->test_completed = 3;
-	    } else if (cmd) {
-		abnormal_finished(cmd, DID_BAD_TARGET << 16);
-	    }
-#if 0	    
-	    hostdata->intrs = 0;
-#endif
-	}
-    } 
-
-/*
- * FIXME : in theory, we can also get a UDC when a STO occurs.
- */
-    if (sstat0_sist0 & SSTAT0_UDC) {
-	fatal = 1;
-	if (cmd) {
-	    printk("scsi%d : target %d lun %d unexpected disconnect\n",
-		host->host_no, cmd->cmd->device->id, cmd->cmd->device->lun);
-	    print_lots (host);
-	    abnormal_finished(cmd, DID_ERROR << 16);
-	} else 
-	     printk("scsi%d : unexpected disconnect (no command)\n",
-		host->host_no);
-
-	hostdata->dsp = (u32 *) hostdata->schedule;
-	hostdata->dsp_changed = 1;
-    }
-
-    /* SCSI PARITY error */
-    if (sstat0_sist0 & SSTAT0_PAR) {
-	fatal = 1;
-	if (cmd && cmd->cmd) {
-	    printk("scsi%d : target %d lun %d parity error.\n",
-		host->host_no, cmd->cmd->device->id, cmd->cmd->device->lun);
-	    abnormal_finished (cmd, DID_PARITY << 16); 
-	} else
-	    printk("scsi%d : parity error\n", host->host_no);
-	/* Should send message out, parity error */
-
-	/* XXX - Reduce synchronous transfer rate! */
-	hostdata->dsp = hostdata->script + hostdata->E_initiator_abort /
-    	    sizeof(u32);
-	hostdata->dsp_changed = 1; 
-    /* SCSI GROSS error */
-    } 
-
-    if (sstat0_sist0 & SSTAT0_SGE) {
-	fatal = 1;
-	printk("scsi%d : gross error, saved2_dsa = 0x%x\n", host->host_no,
-					(unsigned int)hostdata->saved2_dsa);
-	print_lots (host);
-	
-	/* 
-         * A SCSI gross error may occur when we have 
-	 *
-	 * - A synchronous offset which causes the SCSI FIFO to be overwritten.
-	 *
-	 * - A REQ which causes the maximum synchronous offset programmed in 
-	 * 	the SXFER register to be exceeded.
-	 *
-	 * - A phase change with an outstanding synchronous offset.
-	 *
-	 * - Residual data in the synchronous data FIFO, with a transfer
-	 *	other than a synchronous receive is started.$#
-	 */
-		
-
-	/* XXX Should deduce synchronous transfer rate! */
-	hostdata->dsp = hostdata->script + hostdata->E_initiator_abort /
-    	    sizeof(u32);
-	hostdata->dsp_changed = 1;
-    /* Phase mismatch */
-    } 
-
-    if (sstat0_sist0 & SSTAT0_MA) {
-	fatal = 1;
-	if (hostdata->options & OPTION_DEBUG_INTR)
-	    printk ("scsi%d : SSTAT0_MA\n", host->host_no);
-	intr_phase_mismatch (host, cmd);
-    }
-
-#if 0
-    if (sstat0_sist0 & SIST0_800_RSL) 
-	printk ("scsi%d : Oh no Mr. Bill!\n", host->host_no);
-#endif
-    
-/*
- * If a fatal SCSI interrupt occurs, we must insure that the DMA and
- * SCSI FIFOs were flushed.
- */
-
-    if (fatal) {
-	if (!hostdata->dstat_valid) {
-	    hostdata->dstat = NCR53c7x0_read8(DSTAT_REG);
-	    hostdata->dstat_valid = 1;
-	}
-
-	if (!(hostdata->dstat & DSTAT_DFE)) {
-	  printk ("scsi%d : DMA FIFO not empty\n", host->host_no);
-	  /*
-	   * Really need to check this code for 710  RGH.
-	   * Havn't seen any problems, but maybe we should FLUSH before
-	   * clearing sometimes.
-	   */
-          NCR53c7x0_write8 (CTEST8_REG, CTEST8_10_CLF);
-          while (NCR53c7x0_read8 (CTEST8_REG) & CTEST8_10_CLF)
-		;
-	  hostdata->dstat |= DSTAT_DFE;
-    	}
-    }
-}
-
-#ifdef CYCLIC_TRACE
-
-/*
- * The following implements a cyclic log of instructions executed, if you turn
- * TRACE on.  It will also print the log for you.  Very useful when debugging
- * 53c710 support, possibly not really needed any more.
- */
-
-u32 insn_log[4096];
-u32 insn_log_index = 0;
-
-void log1 (u32 i)
-{
-	insn_log[insn_log_index++] = i;
-	if (insn_log_index == 4096)
-		insn_log_index = 0;
-}
-
-void log_insn (u32 *ip)
-{
-	log1 ((u32)ip);
-	log1 (*ip);
-	log1 (*(ip+1));
-	if (((*ip >> 24) & DCMD_TYPE_MASK) == DCMD_TYPE_MMI)
-		log1 (*(ip+2));
-}
-
-void dump_log(void)
-{
-	int cnt = 0;
-	int i = insn_log_index;
-	int size;
-	struct Scsi_Host *host = first_host;
-
-	while (cnt < 4096) {
-		printk ("%08x (+%6x): ", insn_log[i], (insn_log[i] - (u32)&(((struct NCR53c7x0_hostdata *)host->hostdata[0])->script))/4);
-		if (++i == 4096)
-			i = 0;
-		cnt++;
-		if (((insn_log[i]  >> 24) & DCMD_TYPE_MASK) == DCMD_TYPE_MMI) 
-			size = 3;
-		else
-			size = 2;
-		while (size--) {
-			printk ("%08x ", insn_log[i]);
-			if (++i == 4096)
-				i = 0;
-			cnt++;
-		}
-		printk ("\n");
-	}
-}
-#endif
-
-
-/*
- * Function : static void NCR53c7x0_intfly (struct Scsi_Host *host)
- *
- * Purpose : Scan command queue for specified host, looking for completed
- *           commands.
- * 
- * Inputs : Scsi_Host pointer.
- *
- * 	This is called from the interrupt handler, when a simulated INTFLY
- * 	interrupt occurs.
- */
-
-static void
-NCR53c7x0_intfly (struct Scsi_Host *host)
-{
-    NCR53c7x0_local_declare();
-    struct NCR53c7x0_hostdata *hostdata;	/* host->hostdata[0] */
-    struct NCR53c7x0_cmd *cmd,			/* command which halted */
-	**cmd_prev_ptr;
-    unsigned long flags;				
-    char search_found = 0;			/* Got at least one ? */
-
-    hostdata = (struct NCR53c7x0_hostdata *) host->hostdata[0];
-    NCR53c7x0_local_setup(host);
-
-    if (hostdata->options & OPTION_DEBUG_INTR)
-    printk ("scsi%d : INTFLY\n", host->host_no); 
-
-    /*
-    * Traverse our list of running commands, and look
-    * for those with valid (non-0xff ff) status and message
-    * bytes encoded in the result which signify command
-    * completion.
-    */
-
-    local_irq_save(flags);
-restart:
-    for (cmd_prev_ptr = (struct NCR53c7x0_cmd **)&(hostdata->running_list),
-	cmd = (struct NCR53c7x0_cmd *) hostdata->running_list; cmd ;
-	cmd_prev_ptr = (struct NCR53c7x0_cmd **) &(cmd->next), 
-    	cmd = (struct NCR53c7x0_cmd *) cmd->next)
-    {
-	Scsi_Cmnd *tmp;
-
-	if (!cmd) {
-	    printk("scsi%d : very weird.\n", host->host_no);
-	    break;
-	}
-
-	if (!(tmp = cmd->cmd)) {
-	    printk("scsi%d : weird.  NCR53c7x0_cmd has no Scsi_Cmnd\n",
-		    host->host_no);
-	    continue;
-	}
-	/* Copy the result over now; may not be complete,
-	 * but subsequent tests may as well be done on
-	 * cached memory.
-	 */
-	tmp->result = cmd->result;
-
-	if (((tmp->result & 0xff) == 0xff) ||
-			    ((tmp->result & 0xff00) == 0xff00))
-	    continue;
-
-	search_found = 1;
-
-	if (cmd->bounce.len)
-	    memcpy ((void *)cmd->bounce.addr,
-				(void *)cmd->bounce.buf, cmd->bounce.len);
-
-	/* Important - remove from list _before_ done is called */
-	if (cmd_prev_ptr)
-	    *cmd_prev_ptr = (struct NCR53c7x0_cmd *) cmd->next;
-
-	--hostdata->busy[tmp->device->id][tmp->device->lun];
-	cmd->next = hostdata->free;
-	hostdata->free = cmd;
-
-	tmp->host_scribble = NULL;
-
-	if (hostdata->options & OPTION_DEBUG_INTR) {
-	    printk ("scsi%d : command complete : pid %lu, id %d,lun %d result 0x%x ", 
-		  host->host_no, tmp->pid, tmp->device->id, tmp->device->lun, tmp->result);
-	    __scsi_print_command (tmp->cmnd);
-	}
-
-	tmp->scsi_done(tmp);
-	goto restart;
-    }
-    local_irq_restore(flags);
-
-    if (!search_found)  {
-	printk ("scsi%d : WARNING : INTFLY with no completed commands.\n",
-			    host->host_no);
-    } else {
-	run_process_issue_queue();
-    }
-    return;
-}
-
-/*
- * Function : static irqreturn_t NCR53c7x0_intr (int irq, void *dev_id)
- *
- * Purpose : handle NCR53c7x0 interrupts for all NCR devices sharing
- *	the same IRQ line.  
- * 
- * Inputs : Since we're using the IRQF_DISABLED interrupt handler
- *	semantics, irq indicates the interrupt which invoked 
- *	this handler.  
- *
- * On the 710 we simualte an INTFLY with a script interrupt, and the
- * script interrupt handler will call back to this function.
- */
-
-static irqreturn_t
-NCR53c7x0_intr (int irq, void *dev_id)
-{
-    NCR53c7x0_local_declare();
-    struct Scsi_Host *host;			/* Host we are looking at */
-    unsigned char istat; 			/* Values of interrupt regs */
-    struct NCR53c7x0_hostdata *hostdata;	/* host->hostdata[0] */
-    struct NCR53c7x0_cmd *cmd;			/* command which halted */
-    u32 *dsa;					/* DSA */
-    int handled = 0;
-
-#ifdef NCR_DEBUG
-    char buf[80];				/* Debugging sprintf buffer */
-    size_t buflen;				/* Length of same */
-#endif
-
-    host     = (struct Scsi_Host *)dev_id;
-    hostdata = (struct NCR53c7x0_hostdata *) host->hostdata[0];
-    NCR53c7x0_local_setup(host);
-
-    /*
-     * Only read istat once per loop, since reading it again will unstack
-     * interrupts
-     */
-
-    while ((istat = NCR53c7x0_read8(hostdata->istat)) & (ISTAT_SIP|ISTAT_DIP)) {
-	handled = 1;
-	hostdata->dsp_changed = 0;
-	hostdata->dstat_valid = 0;
-    	hostdata->state = STATE_HALTED;
-
-	if (NCR53c7x0_read8 (SSTAT2_REG) & SSTAT2_FF_MASK) 
-	    printk ("scsi%d : SCSI FIFO not empty\n", host->host_no);
-
-	/*
-	 * NCR53c700 and NCR53c700-66 change the current SCSI
-	 * process, hostdata->ncrcurrent, in the Linux driver so
-	 * cmd = hostdata->ncrcurrent.
-	 *
-	 * With other chips, we must look through the commands
-	 * executing and find the command structure which 
-	 * corresponds to the DSA register.
-	 */
-
-	if (hostdata->options & OPTION_700) {
-	    cmd = (struct NCR53c7x0_cmd *) hostdata->ncrcurrent;
-	} else {
-	    dsa = bus_to_virt(NCR53c7x0_read32(DSA_REG));
-	    for (cmd = (struct NCR53c7x0_cmd *) hostdata->running_list;
-		cmd && (dsa + (hostdata->dsa_start / sizeof(u32))) != cmd->dsa;
-		    cmd = (struct NCR53c7x0_cmd *)(cmd->next))
-		;
-	}
-	if (hostdata->options & OPTION_DEBUG_INTR) {
-	    if (cmd) {
-		printk("scsi%d : interrupt for pid %lu, id %d, lun %d ", 
-		    host->host_no, cmd->cmd->pid, (int) cmd->cmd->device->id,
-		    (int) cmd->cmd->device->lun);
-		__scsi_print_command (cmd->cmd->cmnd);
-	    } else {
-		printk("scsi%d : no active command\n", host->host_no);
-	    }
-	}
-	
-	if (istat & ISTAT_SIP) {
-	    if (hostdata->options & OPTION_DEBUG_INTR) 
-		printk ("scsi%d : ISTAT_SIP\n", host->host_no);
-	    intr_scsi (host, cmd);
-	}
-	
-	if (istat & ISTAT_DIP) {
-	    if (hostdata->options & OPTION_DEBUG_INTR) 
-		printk ("scsi%d : ISTAT_DIP\n", host->host_no);
-	    intr_dma (host, cmd);
-	}
-	
-	if (!hostdata->dstat_valid) {
-	    hostdata->dstat = NCR53c7x0_read8(DSTAT_REG);
-	    hostdata->dstat_valid = 1;
-	}
-	
-	if (!(hostdata->dstat & DSTAT_DFE)) {
-	    printk ("scsi%d : DMA FIFO not empty\n", host->host_no);
-	    /* Really need to check this out for 710 RGH */
-	    NCR53c7x0_write8 (CTEST8_REG, CTEST8_10_CLF);
-	    while (NCR53c7x0_read8 (CTEST8_REG) & CTEST8_10_CLF)
-		;
-	    hostdata->dstat |= DSTAT_DFE;
-	}
-
-	if (!hostdata->idle && hostdata->state == STATE_HALTED) {
-	    if (!hostdata->dsp_changed)
-		hostdata->dsp = (u32 *)bus_to_virt(NCR53c7x0_read32(DSP_REG));
-#if 0
-	    printk("scsi%d : new dsp is 0x%lx (virt 0x%p)\n",
-		host->host_no,  virt_to_bus(hostdata->dsp), hostdata->dsp);
-#endif
-		
-	    hostdata->state = STATE_RUNNING;
-	    NCR53c7x0_write32 (DSP_REG, virt_to_bus(hostdata->dsp));
-	    if (hostdata->options & OPTION_DEBUG_TRACE) {
-#ifdef CYCLIC_TRACE
-		log_insn (hostdata->dsp);
-#else
-	    	print_insn (host, hostdata->dsp, "t ", 1);
-#endif
-		NCR53c7x0_write8 (DCNTL_REG,
-			hostdata->saved_dcntl | DCNTL_SSM | DCNTL_STD);
-	    }
-	}
-    }
-    return IRQ_HANDLED;
-}
-
-
-/* 
- * Function : static int abort_connected (struct Scsi_Host *host)
- *
- * Purpose : Assuming that the NCR SCSI processor is currently 
- * 	halted, break the currently established nexus.  Clean
- *	up of the NCR53c7x0_cmd and Scsi_Cmnd structures should
- *	be done on receipt of the abort interrupt.
- *
- * Inputs : host - SCSI host
- *
- */
-
-static int 
-abort_connected (struct Scsi_Host *host) {
-#ifdef NEW_ABORT
-    NCR53c7x0_local_declare();
-#endif
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-/* FIXME : this probably should change for production kernels; at the 
-   least, counter should move to a per-host structure. */
-    static int counter = 5;
-#ifdef NEW_ABORT
-    int sstat, phase, offset;
-    u32 *script;
-    NCR53c7x0_local_setup(host);
-#endif
-
-    if (--counter <= 0) {
-	disable(host);
-	return 0;
-    }
-
-    printk ("scsi%d : DANGER : abort_connected() called \n",
-	host->host_no);
-
-#ifdef NEW_ABORT
-
-/*
- * New strategy : Rather than using a generic abort routine,
- * we'll specifically try to source or sink the appropriate
- * amount of data for the phase we're currently in (taking into 
- * account the current synchronous offset) 
- */
-
-    sstat = NCR53c8x0_read8 (SSTAT2_REG);
-    offset = OFFSET (sstat & SSTAT2_FF_MASK) >> SSTAT2_FF_SHIFT;
-    phase = sstat & SSTAT2_PHASE_MASK;
-
-/*
- * SET ATN
- * MOVE source_or_sink, WHEN CURRENT PHASE 
- * < repeat for each outstanding byte >
- * JUMP send_abort_message
- */
-
-    script = hostdata->abort_script = kmalloc (
-	8  /* instruction size */ * (
-	    1 /* set ATN */ +
-	    (!offset ? 1 : offset) /* One transfer per outstanding byte */ +
-	    1 /* send abort message */),
-	GFP_ATOMIC);
-
-
-#else /* def NEW_ABORT */
-    hostdata->dsp = hostdata->script + hostdata->E_initiator_abort /
-	    sizeof(u32);
-#endif /* def NEW_ABORT */
-    hostdata->dsp_changed = 1;
-
-/* XXX - need to flag the command as aborted after the abort_connected
- 	 code runs 
- */
-    return 0;
-}
-
-/*
- * Function : static int datapath_residual (Scsi_Host *host)
- *
- * Purpose : return residual data count of what's in the chip.
- *
- * Inputs : host - SCSI host
- */
-
-static int
-datapath_residual (struct Scsi_Host *host) {
-    NCR53c7x0_local_declare();
-    int count, synchronous, sstat;
-    unsigned int ddir;
-
-    NCR53c7x0_local_setup(host);
-    /* COMPAT : the 700 and 700-66 need to use DFIFO_00_BO_MASK */
-    count = ((NCR53c7x0_read8 (DFIFO_REG) & DFIFO_10_BO_MASK) -
-	(NCR53c7x0_read32 (DBC_REG) & DFIFO_10_BO_MASK)) & DFIFO_10_BO_MASK;
-    synchronous = NCR53c7x0_read8 (SXFER_REG) & SXFER_MO_MASK;
-    /* COMPAT : DDIR is elsewhere on non-'8xx chips. */
-    ddir = NCR53c7x0_read8 (CTEST0_REG_700) & CTEST0_700_DDIR;
-
-    if (ddir) {
-    /* Receive */
-	if (synchronous) 
-	    count += (NCR53c7x0_read8 (SSTAT2_REG) & SSTAT2_FF_MASK) >> SSTAT2_FF_SHIFT;
-	else
-	    if (NCR53c7x0_read8 (SSTAT1_REG) & SSTAT1_ILF)
-		++count;
-    } else {
-    /* Send */
-	sstat = NCR53c7x0_read8 (SSTAT1_REG);
-	if (sstat & SSTAT1_OLF)
-	    ++count;
-	if (synchronous && (sstat & SSTAT1_ORF))
-	    ++count;
-    }
-    return count;
-}
-
-/* 
- * Function : static const char * sbcl_to_phase (int sbcl)_
- *
- * Purpose : Convert SBCL register to user-parsable phase representation
- *
- * Inputs : sbcl - value of sbcl register
- */
-
-
-static const char *
-sbcl_to_phase (int sbcl) {
-    switch (sbcl & SBCL_PHASE_MASK) {
-    case SBCL_PHASE_DATAIN:
-	return "DATAIN";
-    case SBCL_PHASE_DATAOUT:
-	return "DATAOUT";
-    case SBCL_PHASE_MSGIN:
-	return "MSGIN";
-    case SBCL_PHASE_MSGOUT:
-	return "MSGOUT";
-    case SBCL_PHASE_CMDOUT:
-	return "CMDOUT";
-    case SBCL_PHASE_STATIN:
-	return "STATUSIN";
-    default:
-	return "unknown";
-    }
-}
-
-/* 
- * Function : static const char * sstat2_to_phase (int sstat)_
- *
- * Purpose : Convert SSTAT2 register to user-parsable phase representation
- *
- * Inputs : sstat - value of sstat register
- */
-
-
-static const char *
-sstat2_to_phase (int sstat) {
-    switch (sstat & SSTAT2_PHASE_MASK) {
-    case SSTAT2_PHASE_DATAIN:
-	return "DATAIN";
-    case SSTAT2_PHASE_DATAOUT:
-	return "DATAOUT";
-    case SSTAT2_PHASE_MSGIN:
-	return "MSGIN";
-    case SSTAT2_PHASE_MSGOUT:
-	return "MSGOUT";
-    case SSTAT2_PHASE_CMDOUT:
-	return "CMDOUT";
-    case SSTAT2_PHASE_STATIN:
-	return "STATUSIN";
-    default:
-	return "unknown";
-    }
-}
-
-/* 
- * Function : static void intr_phase_mismatch (struct Scsi_Host *host, 
- *	struct NCR53c7x0_cmd *cmd)
- *
- * Purpose : Handle phase mismatch interrupts
- *
- * Inputs : host, cmd - host and NCR command causing the interrupt, cmd
- * 	may be NULL.
- *
- * Side effects : The abort_connected() routine is called or the NCR chip 
- *	is restarted, jumping to the command_complete entry point, or 
- *	patching the address and transfer count of the current instruction 
- *	and calling the msg_in entry point as appropriate.
- */
-
-static void 
-intr_phase_mismatch (struct Scsi_Host *host, struct NCR53c7x0_cmd *cmd) {
-    NCR53c7x0_local_declare();
-    u32 dbc_dcmd, *dsp, *dsp_next;
-    unsigned char dcmd, sbcl;
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-    	host->hostdata[0];
-    int residual;
-    enum {ACTION_ABORT, ACTION_ABORT_PRINT, ACTION_CONTINUE} action = 
-	ACTION_ABORT_PRINT;
-    const char *where = NULL;
-
-    NCR53c7x0_local_setup(host);
-
-    /*
-     * Corrective action is based on where in the SCSI SCRIPT(tm) the error 
-     * occurred, as well as which SCSI phase we are currently in.
-     */
-    dsp_next = bus_to_virt(NCR53c7x0_read32(DSP_REG));
-
-    /* 
-     * Fetch the current instruction, and remove the operands for easier 
-     * interpretation.
-     */
-    dbc_dcmd = NCR53c7x0_read32(DBC_REG);
-    dcmd = (dbc_dcmd & 0xff000000) >> 24;
-    /*
-     * Like other processors, the NCR adjusts the instruction pointer before
-     * instruction decode.  Set the DSP address back to what it should
-     * be for this instruction based on its size (2 or 3 32 bit words).
-     */
-    dsp = dsp_next - NCR53c7x0_insn_size(dcmd);
-
-
-    /*
-     * Read new SCSI phase from the SBCL lines.  Since all of our code uses 
-     * a WHEN conditional instead of an IF conditional, we don't need to 
-     * wait for a new REQ.
-     */
-    sbcl = NCR53c7x0_read8(SBCL_REG) & SBCL_PHASE_MASK;
-
-    if (!cmd) {
-	action = ACTION_ABORT_PRINT;
-	where = "no current command";
-    /*
-     * The way my SCSI SCRIPTS(tm) are architected, recoverable phase
-     * mismatches should only occur where we're doing a multi-byte  
-     * BMI instruction.  Specifically, this means 
-     *
-     *  - select messages (a SCSI-I target may ignore additional messages
-     * 		after the IDENTIFY; any target may reject a SDTR or WDTR)
-     *
-     *  - command out (targets may send a message to signal an error 
-     * 		condition, or go into STATUSIN after they've decided 
-     *		they don't like the command.
-     *
-     *	- reply_message (targets may reject a multi-byte message in the 
-     *		middle)
-     *
-     * 	- data transfer routines (command completion with buffer space
-     *		left, disconnect message, or error message)
-     */
-    } else if (((dsp >= cmd->data_transfer_start && 
-	dsp < cmd->data_transfer_end)) || dsp == (cmd->residual + 2)) {
-	if ((dcmd & (DCMD_TYPE_MASK|DCMD_BMI_OP_MASK|DCMD_BMI_INDIRECT|
-		DCMD_BMI_MSG|DCMD_BMI_CD)) == (DCMD_TYPE_BMI|
-		DCMD_BMI_OP_MOVE_I)) {
-	    residual = datapath_residual (host);
-	    if (hostdata->options & OPTION_DEBUG_DISCONNECT)
-	    	printk ("scsi%d : handling residual transfer (+ %d bytes from DMA FIFO)\n", 
-		    host->host_no, residual);
-
-	    /*
-	     * The first instruction is a CALL to the alternate handler for 
-	     * this data transfer phase, so we can do calls to 
-	     * munge_msg_restart as we would if control were passed 
-	     * from normal dynamic code.
-	     */
-	    if (dsp != cmd->residual + 2) {
-		cmd->residual[0] = ((DCMD_TYPE_TCI | DCMD_TCI_OP_CALL |
-			((dcmd & DCMD_BMI_IO) ? DCMD_TCI_IO : 0)) << 24) | 
-		    DBC_TCI_WAIT_FOR_VALID | DBC_TCI_COMPARE_PHASE;
-		cmd->residual[1] = virt_to_bus(hostdata->script)
-		    + ((dcmd & DCMD_BMI_IO)
-		       ? hostdata->E_other_in : hostdata->E_other_out);
-	    }
-
-	    /*
-	     * The second instruction is the a data transfer block
-	     * move instruction, reflecting the pointer and count at the 
-	     * time of the phase mismatch.
-	     */
-	    cmd->residual[2] = dbc_dcmd + residual;
-	    cmd->residual[3] = NCR53c7x0_read32(DNAD_REG) - residual;
-
-	    /*
-	     * The third and final instruction is a jump to the instruction
-	     * which follows the instruction which had to be 'split'
-	     */
-	    if (dsp != cmd->residual + 2) {
-		cmd->residual[4] = ((DCMD_TYPE_TCI|DCMD_TCI_OP_JUMP) 
-		    << 24) | DBC_TCI_TRUE;
-		cmd->residual[5] = virt_to_bus(dsp_next);
-	    }
-
-	    /*
-	     * For the sake of simplicity, transfer control to the 
-	     * conditional CALL at the start of the residual buffer.
-	     */
-	    hostdata->dsp = cmd->residual;
-	    hostdata->dsp_changed = 1;
-	    action = ACTION_CONTINUE;
-	} else {
-	    where = "non-BMI dynamic DSA code";
-	    action = ACTION_ABORT_PRINT;
-	}
-    } else if (dsp == (hostdata->script + hostdata->E_select_msgout / 4 + 2)) {
-	/* RGH 290697:  Added +2 above, to compensate for the script
-	 * instruction which disables the selection timer. */
-	/* Release ATN */
-	NCR53c7x0_write8 (SOCL_REG, 0);
-	switch (sbcl) {
-    /* 
-     * Some devices (SQ555 come to mind) grab the IDENTIFY message
-     * sent on selection, and decide to go into COMMAND OUT phase
-     * rather than accepting the rest of the messages or rejecting
-     * them.  Handle these devices gracefully.
-     */
-	case SBCL_PHASE_CMDOUT:
-	    hostdata->dsp = dsp + 2 /* two _words_ */;
-	    hostdata->dsp_changed = 1;
-	    printk ("scsi%d : target %d ignored SDTR and went into COMMAND OUT\n", 
-		host->host_no, cmd->cmd->device->id);
-	    cmd->flags &= ~CMD_FLAG_SDTR;
-	    action = ACTION_CONTINUE;
-	    break;
-	case SBCL_PHASE_MSGIN:
-	    hostdata->dsp = hostdata->script + hostdata->E_msg_in / 
-		sizeof(u32);
-	    hostdata->dsp_changed = 1;
-	    action = ACTION_CONTINUE;
-	    break;
-	default:
-	    where="select message out";
-	    action = ACTION_ABORT_PRINT;
-	}
-    /*
-     * Some SCSI devices will interpret a command as they read the bytes
-     * off the SCSI bus, and may decide that the command is Bogus before 
-     * they've read the entire command off the bus.
-     */
-    } else if (dsp == hostdata->script + hostdata->E_cmdout_cmdout / sizeof 
-	(u32)) {
-	hostdata->dsp = hostdata->script + hostdata->E_data_transfer /
-	    sizeof (u32);
-	hostdata->dsp_changed = 1;
-	action = ACTION_CONTINUE;
-    /* FIXME : we need to handle message reject, etc. within msg_respond. */
-#ifdef notyet
-    } else if (dsp == hostdata->script + hostdata->E_reply_message) {
-	switch (sbcl) {
-    /* Any other phase mismatches abort the currently executing command.  */
-#endif
-    } else {
-	where = "unknown location";
-	action = ACTION_ABORT_PRINT;
-    }
-
-    /* Flush DMA FIFO */
-    if (!hostdata->dstat_valid) {
-	hostdata->dstat = NCR53c7x0_read8(DSTAT_REG);
-	hostdata->dstat_valid = 1;
-    }
-    if (!(hostdata->dstat & DSTAT_DFE)) {
-      /* Really need to check this out for 710 RGH */
-      NCR53c7x0_write8 (CTEST8_REG, CTEST8_10_CLF);
-      while (NCR53c7x0_read8 (CTEST8_REG) & CTEST8_10_CLF);
-      hostdata->dstat |= DSTAT_DFE;
-    }
-
-    switch (action) {
-    case ACTION_ABORT_PRINT:
-	printk("scsi%d : %s : unexpected phase %s.\n",
-	     host->host_no, where ? where : "unknown location", 
-	     sbcl_to_phase(sbcl));
-	print_lots (host);
-    /* Fall through to ACTION_ABORT */
-    case ACTION_ABORT:
-	abort_connected (host);
-	break;
-    case ACTION_CONTINUE:
-	break;
-    }
-
-#if 0
-    if (hostdata->dsp_changed) {
-	printk("scsi%d: new dsp 0x%p\n", host->host_no, hostdata->dsp);
-	print_insn (host, hostdata->dsp, "", 1);
-    }
-#endif
-}
-
-/*
- * Function : static void intr_bf (struct Scsi_Host *host, 
- * 	struct NCR53c7x0_cmd *cmd)
- *
- * Purpose : handle BUS FAULT interrupts 
- *
- * Inputs : host, cmd - host and NCR command causing the interrupt, cmd
- * 	may be NULL.
- */
-
-static void
-intr_bf (struct Scsi_Host *host, struct NCR53c7x0_cmd *cmd) {
-    NCR53c7x0_local_declare();
-    u32 *dsp,
-	*next_dsp,		/* Current dsp */
-    	*dsa,
-	dbc_dcmd;		/* DCMD (high eight bits) + DBC */
-    char *reason = NULL;
-    /* Default behavior is for a silent error, with a retry until we've
-       exhausted retries. */
-    enum {MAYBE, ALWAYS, NEVER} retry = MAYBE;
-    int report = 0;
-    NCR53c7x0_local_setup(host);
-
-    dbc_dcmd = NCR53c7x0_read32 (DBC_REG);
-    next_dsp = bus_to_virt (NCR53c7x0_read32(DSP_REG));
-    dsp = next_dsp - NCR53c7x0_insn_size ((dbc_dcmd >> 24) & 0xff);
-/* FIXME - check chip type  */
-    dsa = bus_to_virt (NCR53c7x0_read32(DSA_REG));
-
-    /*
-     * Bus faults can be caused by either a Bad Address or 
-     * Target Abort. We should check the Received Target Abort
-     * bit of the PCI status register and Master Abort Bit.
-     *
-     * 	- Master Abort bit indicates that no device claimed
-     *		the address with DEVSEL within five clocks
-     *
-     *	- Target Abort bit indicates that a target claimed it,
-     *		but changed its mind once it saw the byte enables.
-     *
-     */
-
-    /* 53c710, not PCI system */
-    report = 1;
-    reason = "Unknown";
-
-#ifndef notyet
-    report = 1;
-#endif
-    if (report && reason)
-    {
-	printk(KERN_ALERT "scsi%d : BUS FAULT reason = %s\n",
-	     host->host_no, reason ? reason : "unknown");
-	print_lots (host);
-    }
-
-#ifndef notyet
-    retry = NEVER;
-#endif
-
-    /* 
-     * TODO : we should attempt to recover from any spurious bus 
-     * faults.  After X retries, we should figure that things are 
-     * sufficiently wedged, and call NCR53c7xx_reset.
-     *
-     * This code should only get executed once we've decided that we 
-     * cannot retry.
-     */
-
-    if (retry == NEVER) {
-    	printk(KERN_ALERT "          mail richard@sleepie.demon.co.uk\n");
-    	FATAL (host);
-    }
-}
-
-/*
- * Function : static void intr_dma (struct Scsi_Host *host, 
- * 	struct NCR53c7x0_cmd *cmd)
- *
- * Purpose : handle all DMA interrupts, indicated by the setting 
- * 	of the DIP bit in the ISTAT register.
- *
- * Inputs : host, cmd - host and NCR command causing the interrupt, cmd
- * 	may be NULL.
- */
-
-static void 
-intr_dma (struct Scsi_Host *host, struct NCR53c7x0_cmd *cmd) {
-    NCR53c7x0_local_declare();
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    unsigned char dstat;	/* DSTAT */	
-    u32 *dsp,
-	*next_dsp,		/* Current dsp */
-    	*dsa,
-	dbc_dcmd;		/* DCMD (high eight bits) + DBC */
-    int tmp;
-    unsigned long flags;
-    NCR53c7x0_local_setup(host);
-
-    if (!hostdata->dstat_valid) {
-	hostdata->dstat = NCR53c7x0_read8(DSTAT_REG);
-	hostdata->dstat_valid = 1;
-    }
-    
-    dstat = hostdata->dstat;
-    
-    if (hostdata->options & OPTION_DEBUG_INTR)
-	printk("scsi%d : DSTAT=0x%x\n", host->host_no, (int) dstat);
-
-    dbc_dcmd = NCR53c7x0_read32 (DBC_REG);
-    next_dsp = bus_to_virt(NCR53c7x0_read32(DSP_REG));
-    dsp = next_dsp - NCR53c7x0_insn_size ((dbc_dcmd >> 24) & 0xff);
-/* XXX - check chip type */
-    dsa = bus_to_virt(NCR53c7x0_read32(DSA_REG));
-
-    /*
-     * DSTAT_ABRT is the aborted interrupt.  This is set whenever the 
-     * SCSI chip is aborted.  
-     * 
-     * With NCR53c700 and NCR53c700-66 style chips, we should only 
-     * get this when the chip is currently running the accept 
-     * reselect/select code and we have set the abort bit in the 
-     * ISTAT register.
-     *
-     */
-    
-    if (dstat & DSTAT_ABRT) {
-#if 0
-	/* XXX - add code here to deal with normal abort */
-	if ((hostdata->options & OPTION_700) && (hostdata->state ==
-	    STATE_ABORTING)) {
-	} else 
-#endif
-	{
-	    printk(KERN_ALERT "scsi%d : unexpected abort interrupt at\n" 
-		   "         ", host->host_no);
-	    print_insn (host, dsp, KERN_ALERT "s ", 1);
-	    FATAL (host);
-	}
-    }
-
-    /*
-     * DSTAT_SSI is the single step interrupt.  Should be generated 
-     * whenever we have single stepped or are tracing.
-     */
-
-    if (dstat & DSTAT_SSI) {
-	if (hostdata->options & OPTION_DEBUG_TRACE) {
-	    /* Don't print instr. until we write DSP at end of intr function */
-	} else if (hostdata->options & OPTION_DEBUG_SINGLE) {
-	    print_insn (host, dsp, "s ", 0);
-	    local_irq_save(flags);
-/* XXX - should we do this, or can we get away with writing dsp? */
-
-	    NCR53c7x0_write8 (DCNTL_REG, (NCR53c7x0_read8(DCNTL_REG) & 
-    	    	~DCNTL_SSM) | DCNTL_STD);
-	    local_irq_restore(flags);
-	} else {
-	    printk(KERN_ALERT "scsi%d : unexpected single step interrupt at\n"
-		   "         ", host->host_no);
-	    print_insn (host, dsp, KERN_ALERT "", 1);
-	    printk(KERN_ALERT "         mail drew@PoohSticks.ORG\n");
-    	    FATAL (host);
-    	}
-    }
-
-    /*
-     * DSTAT_IID / DSTAT_OPC (same bit, same meaning, only the name 
-     * is different) is generated whenever an illegal instruction is 
-     * encountered.  
-     * 
-     * XXX - we may want to emulate INTFLY here, so we can use 
-     *    the same SCSI SCRIPT (tm) for NCR53c710 through NCR53c810  
-     *	  chips.
-     */
-
-    if (dstat & DSTAT_OPC) {
-    /* 
-     * Ascertain if this IID interrupts occurred before or after a STO 
-     * interrupt.  Since the interrupt handling code now leaves 
-     * DSP unmodified until _after_ all stacked interrupts have been
-     * processed, reading the DSP returns the original DSP register.
-     * This means that if dsp lies between the select code, and 
-     * message out following the selection code (where the IID interrupt
-     * would have to have occurred by due to the implicit wait for REQ),
-     * we have an IID interrupt resulting from a STO condition and 
-     * can ignore it.
-     */
-
-	if (((dsp >= (hostdata->script + hostdata->E_select / sizeof(u32))) &&
-	    (dsp <= (hostdata->script + hostdata->E_select_msgout / 
-    	    sizeof(u32) + 8))) || (hostdata->test_running == 2)) {
-	    if (hostdata->options & OPTION_DEBUG_INTR) 
-		printk ("scsi%d : ignoring DSTAT_IID for SSTAT_STO\n",
-		    host->host_no);
-	    if (hostdata->expecting_iid) {
-		hostdata->expecting_iid = 0;
-		hostdata->idle = 1;
-		if (hostdata->test_running == 2) {
-		    hostdata->test_running = 0;
-		    hostdata->test_completed = 3;
-		} else if (cmd) 
-			abnormal_finished (cmd, DID_BAD_TARGET << 16);
-	    } else {
-		hostdata->expecting_sto = 1;
-	    }
-    /*
-     * We can't guarantee we'll be able to execute the WAIT DISCONNECT
-     * instruction within the 3.4us of bus free and arbitration delay
-     * that a target can RESELECT in and assert REQ after we've dropped
-     * ACK.  If this happens, we'll get an illegal instruction interrupt.
-     * Doing away with the WAIT DISCONNECT instructions broke everything,
-     * so instead I'll settle for moving one WAIT DISCONNECT a few 
-     * instructions closer to the CLEAR ACK before it to minimize the
-     * chances of this happening, and handle it if it occurs anyway.
-     *
-     * Simply continue with what we were doing, and control should
-     * be transferred to the schedule routine which will ultimately
-     * pass control onto the reselection or selection (not yet)
-     * code.
-     */
-	} else if (dbc_dcmd == 0x48000000 && (NCR53c7x0_read8 (SBCL_REG) &
-	    SBCL_REQ)) {
-	    if (!(hostdata->options & OPTION_NO_PRINT_RACE))
-	    {
-		printk("scsi%d: REQ before WAIT DISCONNECT IID\n", 
-		    host->host_no);
-		hostdata->options |= OPTION_NO_PRINT_RACE;
-	    }
-	} else {
-	    printk(KERN_ALERT "scsi%d : invalid instruction\n", host->host_no);
-	    print_lots (host);
-	    printk(KERN_ALERT "         mail Richard@sleepie.demon.co.uk with ALL\n"
-		              "         boot messages and diagnostic output\n");
-    	    FATAL (host);
-	}
-    }
-
-    /* 
-     * DSTAT_BF are bus fault errors.  DSTAT_800_BF is valid for 710 also.
-     */
-    
-    if (dstat & DSTAT_800_BF) {
-	intr_bf (host, cmd);
-    }
-	
-
-    /* 
-     * DSTAT_SIR interrupts are generated by the execution of 
-     * the INT instruction.  Since the exact values available 
-     * are determined entirely by the SCSI script running, 
-     * and are local to a particular script, a unique handler
-     * is called for each script.
-     */
-
-    if (dstat & DSTAT_SIR) {
-	if (hostdata->options & OPTION_DEBUG_INTR)
-	    printk ("scsi%d : DSTAT_SIR\n", host->host_no);
-	switch ((tmp = hostdata->dstat_sir_intr (host, cmd))) {
-	case SPECIFIC_INT_NOTHING:
-	case SPECIFIC_INT_RESTART:
-	    break;
-	case SPECIFIC_INT_ABORT:
-	    abort_connected(host);
-	    break;
-	case SPECIFIC_INT_PANIC:
-	    printk(KERN_ALERT "scsi%d : failure at ", host->host_no);
-	    print_insn (host, dsp, KERN_ALERT "", 1);
-	    printk(KERN_ALERT "          dstat_sir_intr() returned SPECIFIC_INT_PANIC\n");
-    	    FATAL (host);
-	    break;
-	case SPECIFIC_INT_BREAK:
-	    intr_break (host, cmd);
-	    break;
-	default:
-	    printk(KERN_ALERT "scsi%d : failure at ", host->host_no);
-	    print_insn (host, dsp, KERN_ALERT "", 1);
-	    printk(KERN_ALERT"          dstat_sir_intr() returned unknown value %d\n", 
-		tmp);
-    	    FATAL (host);
-	}
-    } 
-}
-
-/*
- * Function : static int print_insn (struct Scsi_Host *host, 
- * 	u32 *insn, int kernel)
- *
- * Purpose : print numeric representation of the instruction pointed
- * 	to by insn to the debugging or kernel message buffer
- *	as appropriate.  
- *
- * 	If desired, a user level program can interpret this 
- * 	information.
- *
- * Inputs : host, insn - host, pointer to instruction, prefix - 
- *	string to prepend, kernel - use printk instead of debugging buffer.
- *
- * Returns : size, in u32s, of instruction printed.
- */
-
-/*
- * FIXME: should change kernel parameter so that it takes an ENUM
- * 	specifying severity - either KERN_ALERT or KERN_PANIC so
- *	all panic messages are output with the same severity.
- */
-
-static int 
-print_insn (struct Scsi_Host *host, const u32 *insn, 
-    const char *prefix, int kernel) {
-    char buf[160], 		/* Temporary buffer and pointer.  ICKY 
-				   arbitrary length.  */
-
-		
-	*tmp;			
-    unsigned char dcmd;		/* dcmd register for *insn */
-    int size;
-
-    /* 
-     * Check to see if the instruction pointer is not bogus before 
-     * indirecting through it; avoiding red-zone at start of 
-     * memory.
-     *
-     * FIXME: icky magic needs to happen here on non-intel boxes which
-     * don't have kernel memory mapped in like this.  Might be reasonable
-     * to use vverify()?
-     */
-
-    if (virt_to_phys((void *)insn) < PAGE_SIZE || 
-	virt_to_phys((void *)(insn + 8)) > virt_to_phys(high_memory) ||
-	((((dcmd = (insn[0] >> 24) & 0xff) & DCMD_TYPE_MMI) == DCMD_TYPE_MMI) &&
-	virt_to_phys((void *)(insn + 12)) > virt_to_phys(high_memory))) {
-	size = 0;
-	sprintf (buf, "%s%p: address out of range\n",
-	    prefix, insn);
-    } else {
-/* 
- * FIXME : (void *) cast in virt_to_bus should be unnecessary, because
- * 	it should take const void * as argument.
- */
-#if !defined(CONFIG_MVME16x) && !defined(CONFIG_BVME6000)
-	sprintf(buf, "%s0x%lx (virt 0x%p) : 0x%08x 0x%08x (virt 0x%p)", 
-	    (prefix ? prefix : ""), virt_to_bus((void *) insn), insn,  
-	    insn[0], insn[1], bus_to_virt (insn[1]));
-#else
-	/* Remove virtual addresses to reduce output, as they are the same */
-	sprintf(buf, "%s0x%x (+%x) : 0x%08x 0x%08x", 
-	    (prefix ? prefix : ""), (u32)insn, ((u32)insn -
-		(u32)&(((struct NCR53c7x0_hostdata *)host->hostdata[0])->script))/4, 
-	    insn[0], insn[1]);
-#endif
-	tmp = buf + strlen(buf);
-	if ((dcmd & DCMD_TYPE_MASK) == DCMD_TYPE_MMI)  {
-#if !defined(CONFIG_MVME16x) && !defined(CONFIG_BVME6000)
-	    sprintf (tmp, " 0x%08x (virt 0x%p)\n", insn[2], 
-		bus_to_virt(insn[2]));
-#else
-	    /* Remove virtual addr to reduce output, as it is the same */
-	    sprintf (tmp, " 0x%08x\n", insn[2]);
-#endif
-	    size = 3;
-	} else {
-	    sprintf (tmp, "\n");
-	    size = 2;
-	}
-    }
-
-    if (kernel) 
-	printk ("%s", buf);
-#ifdef NCR_DEBUG
-    else {
-	size_t len = strlen(buf);
-	debugger_kernel_write(host, buf, len);
-    }
-#endif
-    return size;
-}
-
-/*
- * Function : int NCR53c7xx_abort (Scsi_Cmnd *cmd)
- * 
- * Purpose : Abort an errant SCSI command, doing all necessary
- *	cleanup of the issue_queue, running_list, shared Linux/NCR
- *	dsa issue and reconnect queues.
- *
- * Inputs : cmd - command to abort, code - entire result field
- *
- * Returns : 0 on success, -1 on failure.
- */
-
-int 
-NCR53c7xx_abort (Scsi_Cmnd *cmd) {
-    NCR53c7x0_local_declare();
-    struct Scsi_Host *host = cmd->device->host;
-    struct NCR53c7x0_hostdata *hostdata = host ? (struct NCR53c7x0_hostdata *) 
-	host->hostdata[0] : NULL;
-    unsigned long flags;
-    struct NCR53c7x0_cmd *curr, **prev;
-    Scsi_Cmnd *me, **last;
-#if 0
-    static long cache_pid = -1;
-#endif
-
-
-    if (!host) {
-	printk ("Bogus SCSI command pid %ld; no host structure\n",
-	    cmd->pid);
-	return SCSI_ABORT_ERROR;
-    } else if (!hostdata) {
-	printk ("Bogus SCSI host %d; no hostdata\n", host->host_no);
-	return SCSI_ABORT_ERROR;
-    }
-    NCR53c7x0_local_setup(host);
-
-/*
- * CHECK : I don't think that reading ISTAT will unstack any interrupts,
- *	since we need to write the INTF bit to clear it, and SCSI/DMA
- * 	interrupts don't clear until we read SSTAT/SIST and DSTAT registers.
- *	
- *	See that this is the case.  Appears to be correct on the 710, at least.
- *
- * I suspect that several of our failures may be coming from a new fatal
- * interrupt (possibly due to a phase mismatch) happening after we've left
- * the interrupt handler, but before the PIC has had the interrupt condition
- * cleared.
- */
-
-    if (NCR53c7x0_read8(hostdata->istat) & (ISTAT_DIP|ISTAT_SIP)) {
-	printk ("scsi%d : dropped interrupt for command %ld\n", host->host_no,
-	    cmd->pid);
-	NCR53c7x0_intr (host->irq, NULL, NULL);
-	return SCSI_ABORT_BUSY;
-    }
-	
-    local_irq_save(flags);
-#if 0
-    if (cache_pid == cmd->pid) 
-	panic ("scsi%d : bloody fetus %d\n", host->host_no, cmd->pid);
-    else
-	cache_pid = cmd->pid;
-#endif
-	
-
-/*
- * The command could be hiding in the issue_queue.  This would be very
- * nice, as commands can't be moved from the high level driver's issue queue 
- * into the shared queue until an interrupt routine is serviced, and this
- * moving is atomic.  
- *
- * If this is the case, we don't have to worry about anything - we simply
- * pull the command out of the old queue, and call it aborted.
- */
-
-    for (me = (Scsi_Cmnd *) hostdata->issue_queue, 
-         last = (Scsi_Cmnd **) &(hostdata->issue_queue);
-	 me && me != cmd;  last = (Scsi_Cmnd **)&(me->SCp.ptr), 
-	 me = (Scsi_Cmnd *)me->SCp.ptr);
-
-    if (me) {
-	*last = (Scsi_Cmnd *) me->SCp.ptr;
-	if (me->host_scribble) {
-	    ((struct NCR53c7x0_cmd *)me->host_scribble)->next = hostdata->free;
-	    hostdata->free = (struct NCR53c7x0_cmd *) me->host_scribble;
-	    me->host_scribble = NULL;
-	}
-	cmd->result = DID_ABORT << 16;
-	cmd->scsi_done(cmd);
-	printk ("scsi%d : found command %ld in Linux issue queue\n", 
-	    host->host_no, me->pid);
-	local_irq_restore(flags);
-    	run_process_issue_queue();
-	return SCSI_ABORT_SUCCESS;
-    }
-
-/* 
- * That failing, the command could be in our list of already executing 
- * commands.  If this is the case, drastic measures are called for.  
- */ 
-
-    for (curr = (struct NCR53c7x0_cmd *) hostdata->running_list, 
-    	 prev = (struct NCR53c7x0_cmd **) &(hostdata->running_list);
-	 curr && curr->cmd != cmd; prev = (struct NCR53c7x0_cmd **) 
-         &(curr->next), curr = (struct NCR53c7x0_cmd *) curr->next);
-
-    if (curr) {
-	if ((curr->result & 0xff) != 0xff && (curr->result & 0xff00) != 0xff00) {
-            cmd->result = curr->result;
-	    if (prev)
-		*prev = (struct NCR53c7x0_cmd *) curr->next;
-	    curr->next = (struct NCR53c7x0_cmd *) hostdata->free;
-	    cmd->host_scribble = NULL;
-	    hostdata->free = curr;
-	    cmd->scsi_done(cmd);
-	printk ("scsi%d : found finished command %ld in running list\n", 
-	    host->host_no, cmd->pid);
-	    local_irq_restore(flags);
-	    return SCSI_ABORT_NOT_RUNNING;
-	} else {
-	    printk ("scsi%d : DANGER : command running, can not abort.\n",
-		cmd->device->host->host_no);
-	    local_irq_restore(flags);
-	    return SCSI_ABORT_BUSY;
-	}
-    }
-
-/* 
- * And if we couldn't find it in any of our queues, it must have been 
- * a dropped interrupt.
- */
-
-    curr = (struct NCR53c7x0_cmd *) cmd->host_scribble;
-    if (curr) {
-	curr->next = hostdata->free;
-	hostdata->free = curr;
-	cmd->host_scribble = NULL;
-    }
-
-    if (curr == NULL || ((curr->result & 0xff00) == 0xff00) ||
-		((curr->result & 0xff) == 0xff)) {
-	printk ("scsi%d : did this command ever run?\n", host->host_no);
-	    cmd->result = DID_ABORT << 16;
-    } else {
-	printk ("scsi%d : probably lost INTFLY, normal completion\n", 
-	    host->host_no);
-        cmd->result = curr->result;
-/* 
- * FIXME : We need to add an additional flag which indicates if a 
- * command was ever counted as BUSY, so if we end up here we can
- * decrement the busy count if and only if it is necessary.
- */
-        --hostdata->busy[cmd->device->id][cmd->device->lun];
-    }
-    local_irq_restore(flags);
-    cmd->scsi_done(cmd);
-
-/* 
- * We need to run process_issue_queue since termination of this command 
- * may allow another queued command to execute first? 
- */
-    return SCSI_ABORT_NOT_RUNNING;
-}
-
-/*
- * Function : int NCR53c7xx_reset (Scsi_Cmnd *cmd) 
- * 
- * Purpose : perform a hard reset of the SCSI bus and NCR
- * 	chip.
- *
- * Inputs : cmd - command which caused the SCSI RESET
- *
- * Returns : 0 on success.
- */
- 
-int 
-NCR53c7xx_reset (Scsi_Cmnd *cmd, unsigned int reset_flags) {
-    NCR53c7x0_local_declare();
-    unsigned long flags;
-    int found = 0;
-    struct NCR53c7x0_cmd * c;
-    Scsi_Cmnd *tmp;
-    /*
-     * When we call scsi_done(), it's going to wake up anything sleeping on the
-     * resources which were in use by the aborted commands, and we'll start to 
-     * get new commands.
-     *
-     * We can't let this happen until after we've re-initialized the driver
-     * structures, and can't reinitialize those structures until after we've 
-     * dealt with their contents.
-     *
-     * So, we need to find all of the commands which were running, stick
-     * them on a linked list of completed commands (we'll use the host_scribble
-     * pointer), do our reinitialization, and then call the done function for
-     * each command.  
-     */
-    Scsi_Cmnd *nuke_list = NULL;
-    struct Scsi_Host *host = cmd->device->host;
-    struct NCR53c7x0_hostdata *hostdata = 
-    	(struct NCR53c7x0_hostdata *) host->hostdata[0];
-
-    NCR53c7x0_local_setup(host);
-    local_irq_save(flags);
-    ncr_halt (host);
-    print_lots (host);
-    dump_events (host, 30);
-    ncr_scsi_reset (host);
-    for (tmp = nuke_list = return_outstanding_commands (host, 1 /* free */,
-	0 /* issue */ ); tmp; tmp = (Scsi_Cmnd *) tmp->SCp.buffer)
-	if (tmp == cmd) {
-	    found = 1;
-	    break;
-	}
-	    
-    /* 
-     * If we didn't find the command which caused this reset in our running
-     * list, then we've lost it.  See that it terminates normally anyway.
-     */
-    if (!found) {
-    	c = (struct NCR53c7x0_cmd *) cmd->host_scribble;
-    	if (c) {
-	    cmd->host_scribble = NULL;
-    	    c->next = hostdata->free;
-    	    hostdata->free = c;
-    	} else
-	    printk ("scsi%d: lost command %ld\n", host->host_no, cmd->pid);
-	cmd->SCp.buffer = (struct scatterlist *) nuke_list;
-	nuke_list = cmd;
-    }
-
-    NCR53c7x0_driver_init (host);
-    hostdata->soft_reset (host);
-    if (hostdata->resets == 0) 
-	disable(host);
-    else if (hostdata->resets != -1)
-	--hostdata->resets;
-    local_irq_restore(flags);
-    for (; nuke_list; nuke_list = tmp) {
-	tmp = (Scsi_Cmnd *) nuke_list->SCp.buffer;
-    	nuke_list->result = DID_RESET << 16;
-	nuke_list->scsi_done (nuke_list);
-    }
-    local_irq_restore(flags);
-    return SCSI_RESET_SUCCESS;
-}
-
-/*
- * The NCR SDMS bios follows Annex A of the SCSI-CAM draft, and 
- * therefore shares the scsicam_bios_param function.
- */
-
-/*
- * Function : int insn_to_offset (Scsi_Cmnd *cmd, u32 *insn)
- *
- * Purpose : convert instructions stored at NCR pointer into data 
- *	pointer offset.
- * 
- * Inputs : cmd - SCSI command; insn - pointer to instruction.  Either current
- *	DSP, or saved data pointer.
- *
- * Returns : offset on success, -1 on failure.
- */
-
-
-static int 
-insn_to_offset (Scsi_Cmnd *cmd, u32 *insn) {
-    struct NCR53c7x0_hostdata *hostdata = 
-	(struct NCR53c7x0_hostdata *) cmd->device->host->hostdata[0];
-    struct NCR53c7x0_cmd *ncmd = 
-	(struct NCR53c7x0_cmd *) cmd->host_scribble;
-    int offset = 0, buffers;
-    struct scatterlist *segment;
-    char *ptr;
-    int found = 0;
-
-/*
- * With the current code implementation, if the insn is inside dynamically 
- * generated code, the data pointer will be the instruction preceding 
- * the next transfer segment.
- */
-
-    if (!check_address ((unsigned long) ncmd, sizeof (struct NCR53c7x0_cmd)) &&
-	((insn >= ncmd->data_transfer_start &&  
-    	    insn < ncmd->data_transfer_end) ||
-    	(insn >= ncmd->residual &&
-    	    insn < (ncmd->residual + 
-    	    	sizeof(ncmd->residual))))) {
-	    ptr = bus_to_virt(insn[3]);
-
-	    if ((buffers = cmd->use_sg)) {
-    	    	for (offset = 0, 
-		     	segment = (struct scatterlist *) cmd->request_buffer;
-    	    	     buffers && !((found = ((ptr >= (char *)page_address(segment->page)+segment->offset) && 
-    	    	    	    (ptr < ((char *)page_address(segment->page)+segment->offset+segment->length)))));
-    	    	     --buffers, offset += segment->length, ++segment)
-#if 0
-		    printk("scsi%d: comparing 0x%p to 0x%p\n", 
-			cmd->device->host->host_no, saved, page_address(segment->page+segment->offset));
-#else
-		    ;
-#endif
-    	    	    offset += ptr - ((char *)page_address(segment->page)+segment->offset);
-    	    } else {
-		found = 1;
-    	    	offset = ptr - (char *) (cmd->request_buffer);
-    	    }
-    } else if ((insn >= hostdata->script + 
-		hostdata->E_data_transfer / sizeof(u32)) &&
-	       (insn <= hostdata->script +
-		hostdata->E_end_data_transfer / sizeof(u32))) {
-    	found = 1;
-	offset = 0;
-    }
-    return found ? offset : -1;
-}
-
-
-
-/*
- * Function : void print_progress (Scsi_Cmnd *cmd) 
- * 
- * Purpose : print the current location of the saved data pointer
- *
- * Inputs : cmd - command we are interested in
- *
- */
-
-static void 
-print_progress (Scsi_Cmnd *cmd) {
-    NCR53c7x0_local_declare();
-    struct NCR53c7x0_cmd *ncmd = 
-	(struct NCR53c7x0_cmd *) cmd->host_scribble;
-    int offset, i;
-    char *where;
-    u32 *ptr;
-    NCR53c7x0_local_setup (cmd->device->host);
-
-    if (check_address ((unsigned long) ncmd,sizeof (struct NCR53c7x0_cmd)) == 0)
-    {
-	printk("\nNCR53c7x0_cmd fields:\n");
-	printk("  bounce.len=0x%x, addr=0x%0x, buf[]=0x%02x %02x %02x %02x\n",
-	    ncmd->bounce.len, ncmd->bounce.addr, ncmd->bounce.buf[0],
-	    ncmd->bounce.buf[1], ncmd->bounce.buf[2], ncmd->bounce.buf[3]);
-	printk("  result=%04x, cdb[0]=0x%02x\n", ncmd->result, ncmd->cmnd[0]);
-    }
-
-    for (i = 0; i < 2; ++i) {
-	if (check_address ((unsigned long) ncmd, 
-	    sizeof (struct NCR53c7x0_cmd)) == -1) 
-	    continue;
-	if (!i) {
-	    where = "saved";
-	    ptr = bus_to_virt(ncmd->saved_data_pointer);
-	} else {
-	    where = "active";
-	    ptr = bus_to_virt (NCR53c7x0_read32 (DSP_REG) -
-		NCR53c7x0_insn_size (NCR53c7x0_read8 (DCMD_REG)) *
-		sizeof(u32));
-	} 
-	offset = insn_to_offset (cmd, ptr);
-
-	if (offset != -1) 
-	    printk ("scsi%d : %s data pointer at offset %d\n",
-		cmd->device->host->host_no, where, offset);
-	else {
-	    int size;
-	    printk ("scsi%d : can't determine %s data pointer offset\n",
-		cmd->device->host->host_no, where);
-	    if (ncmd) {
-		size = print_insn (cmd->device->host,
-		    bus_to_virt(ncmd->saved_data_pointer), "", 1);
-		print_insn (cmd->device->host,
-		    bus_to_virt(ncmd->saved_data_pointer) + size * sizeof(u32),
-		    "", 1);
-	    }
-	}
-    }
-}
-
-
-static void 
-print_dsa (struct Scsi_Host *host, u32 *dsa, const char *prefix) {
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    int i, len;
-    char *ptr;
-    Scsi_Cmnd *cmd;
-
-    if (check_address ((unsigned long) dsa, hostdata->dsa_end - 
-	hostdata->dsa_start) == -1) {
-	printk("scsi%d : bad dsa virt 0x%p\n", host->host_no, dsa);
-	return;
-    }
-    printk("%sscsi%d : dsa at phys 0x%lx (virt 0x%p)\n"
-	    "        + %d : dsa_msgout length = %u, data = 0x%x (virt 0x%p)\n" ,
-    	    prefix ? prefix : "",
-    	    host->host_no,  virt_to_bus (dsa), dsa, hostdata->dsa_msgout,
-    	    dsa[hostdata->dsa_msgout / sizeof(u32)],
-	    dsa[hostdata->dsa_msgout / sizeof(u32) + 1],
-	    bus_to_virt (dsa[hostdata->dsa_msgout / sizeof(u32) + 1]));
-
-    /* 
-     * Only print messages if they're sane in length so we don't
-     * blow the kernel printk buffer on something which won't buy us
-     * anything.
-     */
-
-    if (dsa[hostdata->dsa_msgout / sizeof(u32)] < 
-	    sizeof (hostdata->free->select)) 
-	for (i = dsa[hostdata->dsa_msgout / sizeof(u32)],
-	    ptr = bus_to_virt (dsa[hostdata->dsa_msgout / sizeof(u32) + 1]); 
-	    i > 0 && !check_address ((unsigned long) ptr, 1);
-	    ptr += len, i -= len) {
-	    printk("               ");
-	    len = spi_print_msg(ptr);
-	    printk("\n");
-	    if (!len)
-		break;
-	}
-
-    printk("        + %d : select_indirect = 0x%x\n",
-	hostdata->dsa_select, dsa[hostdata->dsa_select / sizeof(u32)]);
-    cmd = (Scsi_Cmnd *) bus_to_virt(dsa[hostdata->dsa_cmnd / sizeof(u32)]);
-    printk("        + %d : dsa_cmnd = 0x%x ", hostdata->dsa_cmnd,
-	   (u32) virt_to_bus(cmd));
-    /* XXX Maybe we should access cmd->host_scribble->result here. RGH */
-    if (cmd) {
-	printk("               result = 0x%x, target = %d, lun = %d, cmd = ",
-	    cmd->result, cmd->device->id, cmd->device->lun);
-	__scsi_print_command(cmd->cmnd);
-    } else
-	printk("\n");
-    printk("        + %d : dsa_next = 0x%x\n", hostdata->dsa_next,
-	dsa[hostdata->dsa_next / sizeof(u32)]);
-    if (cmd) { 
-	printk("scsi%d target %d : sxfer_sanity = 0x%x, scntl3_sanity = 0x%x\n"
-	       "                   script : ",
-	    host->host_no, cmd->device->id,
-	    hostdata->sync[cmd->device->id].sxfer_sanity,
-	    hostdata->sync[cmd->device->id].scntl3_sanity);
-	for (i = 0; i < (sizeof(hostdata->sync[cmd->device->id].script) / 4); ++i)
-	    printk ("0x%x ", hostdata->sync[cmd->device->id].script[i]);
-	printk ("\n");
-    	print_progress (cmd);
-    }
-}
-/*
- * Function : void print_queues (Scsi_Host *host) 
- * 
- * Purpose : print the contents of the NCR issue and reconnect queues
- *
- * Inputs : host - SCSI host we are interested in
- *
- */
-
-static void 
-print_queues (struct Scsi_Host *host) {
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    u32 *dsa, *next_dsa;
-    volatile u32 *ncrcurrent;
-    int left;
-    Scsi_Cmnd *cmd, *next_cmd;
-    unsigned long flags;
-
-    printk ("scsi%d : issue queue\n", host->host_no);
-
-    for (left = host->can_queue, cmd = (Scsi_Cmnd *) hostdata->issue_queue; 
-	    left >= 0 && cmd; 
-	    cmd = next_cmd) {
-	next_cmd = (Scsi_Cmnd *) cmd->SCp.ptr;
-	local_irq_save(flags);
-	if (cmd->host_scribble) {
-	    if (check_address ((unsigned long) (cmd->host_scribble), 
-		sizeof (cmd->host_scribble)) == -1)
-		printk ("scsi%d: scsi pid %ld bad pointer to NCR53c7x0_cmd\n",
-		    host->host_no, cmd->pid);
-	    /* print_dsa does sanity check on address, no need to check */
-	    else
-	    	print_dsa (host, ((struct NCR53c7x0_cmd *) cmd->host_scribble)
-		    -> dsa, "");
-	} else 
-	    printk ("scsi%d : scsi pid %ld for target %d lun %d has no NCR53c7x0_cmd\n",
-		host->host_no, cmd->pid, cmd->device->id, cmd->device->lun);
-	local_irq_restore(flags);
-    }
-
-    if (left <= 0) {
-	printk ("scsi%d : loop detected in issue queue\n",
-	    host->host_no);
-    }
-
-    /*
-     * Traverse the NCR reconnect and start DSA structures, printing out 
-     * each element until we hit the end or detect a loop.  Currently,
-     * the reconnect structure is a linked list; and the start structure
-     * is an array.  Eventually, the reconnect structure will become a 
-     * list as well, since this simplifies the code.
-     */
-
-    printk ("scsi%d : schedule dsa array :\n", host->host_no);
-    for (left = host->can_queue, ncrcurrent = hostdata->schedule;
-	    left > 0; ncrcurrent += 2, --left)
-	if (ncrcurrent[0] != hostdata->NOP_insn) 
-/* FIXME : convert pointer to dsa_begin to pointer to dsa. */
-	    print_dsa (host, bus_to_virt (ncrcurrent[1] - 
-		(hostdata->E_dsa_code_begin - 
-		hostdata->E_dsa_code_template)), "");
-    printk ("scsi%d : end schedule dsa array\n", host->host_no);
-    
-    printk ("scsi%d : reconnect_dsa_head :\n", host->host_no);
-	    
-    for (left = host->can_queue, 
-	dsa = bus_to_virt (hostdata->reconnect_dsa_head);
-	left >= 0 && dsa; 
-	dsa = next_dsa) {
-	local_irq_save(flags);
-	if (check_address ((unsigned long) dsa, sizeof(dsa)) == -1) {
-	    printk ("scsi%d: bad DSA pointer 0x%p", host->host_no,
-		dsa);
-	    next_dsa = NULL;
-	}
-	else 
-	{
-	    next_dsa = bus_to_virt(dsa[hostdata->dsa_next / sizeof(u32)]);
-	    print_dsa (host, dsa, "");
-	}
-	local_irq_restore(flags);
-    }
-    printk ("scsi%d : end reconnect_dsa_head\n", host->host_no);
-    if (left < 0)
-	printk("scsi%d: possible loop in ncr reconnect list\n",
-	    host->host_no);
-}
-
-static void
-print_lots (struct Scsi_Host *host) {
-    NCR53c7x0_local_declare();
-    struct NCR53c7x0_hostdata *hostdata = 
-	(struct NCR53c7x0_hostdata *) host->hostdata[0];
-    u32 *dsp_next, *dsp, *dsa, dbc_dcmd;
-    unsigned char dcmd, sbcl;
-    int i, size;
-    NCR53c7x0_local_setup(host);
-
-    if ((dsp_next = bus_to_virt(NCR53c7x0_read32 (DSP_REG)))) {
-    	dbc_dcmd = NCR53c7x0_read32(DBC_REG);
-    	dcmd = (dbc_dcmd & 0xff000000) >> 24;
-    	dsp = dsp_next - NCR53c7x0_insn_size(dcmd);
-	dsa = bus_to_virt(NCR53c7x0_read32(DSA_REG));
-	sbcl = NCR53c7x0_read8 (SBCL_REG);
-	    
-	/*
-	 * For the 53c710, the following will report value 0 for SCNTL3
-	 * and STEST0 - we don't have these registers.
-	 */
-    	printk ("scsi%d : DCMD|DBC=0x%x, DNAD=0x%x (virt 0x%p)\n"
-		"         DSA=0x%lx (virt 0x%p)\n"
-	        "         DSPS=0x%x, TEMP=0x%x (virt 0x%p), DMODE=0x%x\n"
-		"         SXFER=0x%x, SCNTL3=0x%x\n"
-		"         %s%s%sphase=%s, %d bytes in SCSI FIFO\n"
-		"         SCRATCH=0x%x, saved2_dsa=0x%0lx\n",
-	    host->host_no, dbc_dcmd, NCR53c7x0_read32(DNAD_REG),
-		bus_to_virt(NCR53c7x0_read32(DNAD_REG)),
-	    virt_to_bus(dsa), dsa,
-	    NCR53c7x0_read32(DSPS_REG), NCR53c7x0_read32(TEMP_REG), 
-	    bus_to_virt (NCR53c7x0_read32(TEMP_REG)),
-	    (int) NCR53c7x0_read8(hostdata->dmode),
-	    (int) NCR53c7x0_read8(SXFER_REG), 
-	    ((hostdata->chip / 100) == 8) ?
-		(int) NCR53c7x0_read8(SCNTL3_REG_800) : 0,
-	    (sbcl & SBCL_BSY) ? "BSY " : "",
-	    (sbcl & SBCL_SEL) ? "SEL " : "",
-	    (sbcl & SBCL_REQ) ? "REQ " : "",
-	    sstat2_to_phase(NCR53c7x0_read8 (((hostdata->chip / 100) == 8) ?
-	    	SSTAT1_REG : SSTAT2_REG)),
-	    (NCR53c7x0_read8 ((hostdata->chip / 100) == 8 ? 
-		SSTAT1_REG : SSTAT2_REG) & SSTAT2_FF_MASK) >> SSTAT2_FF_SHIFT,
-	    ((hostdata->chip / 100) == 8) ? NCR53c7x0_read8 (STEST0_REG_800) :
-		NCR53c7x0_read32(SCRATCHA_REG_800),
-	    hostdata->saved2_dsa);
-	printk ("scsi%d : DSP 0x%lx (virt 0x%p) ->\n", host->host_no, 
-	    virt_to_bus(dsp), dsp);
-    	for (i = 6; i > 0; --i, dsp += size)
-	    size = print_insn (host, dsp, "", 1);
-	if (NCR53c7x0_read8 (SCNTL1_REG) & SCNTL1_CON)  {
-	    if ((hostdata->chip / 100) == 8)
-	        printk ("scsi%d : connected (SDID=0x%x, SSID=0x%x)\n",
-		    host->host_no, NCR53c7x0_read8 (SDID_REG_800),
-		    NCR53c7x0_read8 (SSID_REG_800));
-	    else
-		printk ("scsi%d : connected (SDID=0x%x)\n",
-		    host->host_no, NCR53c7x0_read8 (SDID_REG_700));
-	    print_dsa (host, dsa, "");
-	}
-
-#if 1
-	print_queues (host);
-#endif
-    }
-}
-
-/*
- * Function : static int shutdown (struct Scsi_Host *host)
- * 
- * Purpose : does a clean (we hope) shutdown of the NCR SCSI 
- *	chip.  Use prior to dumping core, unloading the NCR driver,
- * 
- * Returns : 0 on success
- */
-static int 
-shutdown (struct Scsi_Host *host) {
-    NCR53c7x0_local_declare();
-    unsigned long flags;
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    NCR53c7x0_local_setup(host);
-    local_irq_save(flags);
-/* Get in a state where we can reset the SCSI bus */
-    ncr_halt (host);
-    ncr_scsi_reset (host);
-    hostdata->soft_reset(host);
-
-    disable (host);
-    local_irq_restore(flags);
-    return 0;
-}
-
-/*
- * Function : void ncr_scsi_reset (struct Scsi_Host *host)
- *
- * Purpose : reset the SCSI bus.
- */
-
-static void 
-ncr_scsi_reset (struct Scsi_Host *host) {
-    NCR53c7x0_local_declare();
-    unsigned long flags;
-    NCR53c7x0_local_setup(host);
-    local_irq_save(flags);
-    NCR53c7x0_write8(SCNTL1_REG, SCNTL1_RST);
-    udelay(25);	/* Minimum amount of time to assert RST */
-    NCR53c7x0_write8(SCNTL1_REG, 0);
-    local_irq_restore(flags);
-}
-
-/* 
- * Function : void hard_reset (struct Scsi_Host *host)
- *
- */
-
-static void 
-hard_reset (struct Scsi_Host *host) {
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    unsigned long flags;
-    local_irq_save(flags);
-    ncr_scsi_reset(host);
-    NCR53c7x0_driver_init (host);
-    if (hostdata->soft_reset)
-	hostdata->soft_reset (host);
-    local_irq_restore(flags);
-}
-
-
-/*
- * Function : Scsi_Cmnd *return_outstanding_commands (struct Scsi_Host *host,
- *	int free, int issue)
- *
- * Purpose : return a linked list (using the SCp.buffer field as next,
- *	so we don't perturb hostdata.  We don't use a field of the 
- *	NCR53c7x0_cmd structure since we may not have allocated one 
- *	for the command causing the reset.) of Scsi_Cmnd structures that 
- *  	had propagated below the Linux issue queue level.  If free is set, 
- *	free the NCR53c7x0_cmd structures which are associated with 
- *	the Scsi_Cmnd structures, and clean up any internal 
- *	NCR lists that the commands were on.  If issue is set,
- *	also return commands in the issue queue.
- *
- * Returns : linked list of commands
- *
- * NOTE : the caller should insure that the NCR chip is halted
- *	if the free flag is set. 
- */
-
-static Scsi_Cmnd *
-return_outstanding_commands (struct Scsi_Host *host, int free, int issue) {
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    struct NCR53c7x0_cmd *c;
-    int i;
-    u32 *ncrcurrent;
-    Scsi_Cmnd *list = NULL, *tmp;
-    for (c = (struct NCR53c7x0_cmd *) hostdata->running_list; c; 
-    	c = (struct NCR53c7x0_cmd *) c->next)  {
-	if (c->cmd->SCp.buffer) {
-	    printk ("scsi%d : loop detected in running list!\n", host->host_no);
-	    break;
-	} else {
-	    printk ("Duh? Bad things happening in the NCR driver\n");
-	    break;
-	}
-
-	c->cmd->SCp.buffer = (struct scatterlist *) list;
-	list = c->cmd;
-	if (free) {
-    	    c->next = hostdata->free;
-    	    hostdata->free = c;
-	}
-    }
-
-    if (free) { 
-	for (i = 0, ncrcurrent = (u32 *) hostdata->schedule; 
-	    i < host->can_queue; ++i, ncrcurrent += 2) {
-	    ncrcurrent[0] = hostdata->NOP_insn;
-	    ncrcurrent[1] = 0xdeadbeef;
-	}
-	hostdata->ncrcurrent = NULL;
-    }
-
-    if (issue) {
-	for (tmp = (Scsi_Cmnd *) hostdata->issue_queue; tmp; tmp = tmp->next) {
-	    if (tmp->SCp.buffer) {
-		printk ("scsi%d : loop detected in issue queue!\n", 
-			host->host_no);
-		break;
-	    }
-	    tmp->SCp.buffer = (struct scatterlist *) list;
-	    list = tmp;
-	}
-	if (free)
-	    hostdata->issue_queue = NULL;
-		
-    }
-    return list;
-}
-
-/* 
- * Function : static int disable (struct Scsi_Host *host)
- *
- * Purpose : disables the given NCR host, causing all commands
- * 	to return a driver error.  Call this so we can unload the
- * 	module during development and try again.  Eventually, 
- * 	we should be able to find clean workarounds for these
- * 	problems.
- *
- * Inputs : host - hostadapter to twiddle
- *
- * Returns : 0 on success.
- */
-
-static int 
-disable (struct Scsi_Host *host) {
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    unsigned long flags;
-    Scsi_Cmnd *nuke_list, *tmp;
-    local_irq_save(flags);
-    if (hostdata->state != STATE_HALTED)
-	ncr_halt (host);
-    nuke_list = return_outstanding_commands (host, 1 /* free */, 1 /* issue */);
-    hard_reset (host);
-    hostdata->state = STATE_DISABLED;
-    local_irq_restore(flags);
-    printk ("scsi%d : nuking commands\n", host->host_no);
-    for (; nuke_list; nuke_list = tmp) {
-	    tmp = (Scsi_Cmnd *) nuke_list->SCp.buffer;
-	    nuke_list->result = DID_ERROR << 16;
-	    nuke_list->scsi_done(nuke_list);
-    }
-    printk ("scsi%d : done. \n", host->host_no);
-    printk (KERN_ALERT "scsi%d : disabled.  Unload and reload\n",
-    	host->host_no);
-    return 0;
-}
-
-/*
- * Function : static int ncr_halt (struct Scsi_Host *host)
- * 
- * Purpose : halts the SCSI SCRIPTS(tm) processor on the NCR chip
- *
- * Inputs : host - SCSI chip to halt
- *
- * Returns : 0 on success
- */
-
-static int 
-ncr_halt (struct Scsi_Host *host) {
-    NCR53c7x0_local_declare();
-    unsigned long flags;
-    unsigned char istat, tmp;
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    int stage;
-    NCR53c7x0_local_setup(host);
-
-    local_irq_save(flags);
-    /* Stage 0 : eat all interrupts
-       Stage 1 : set ABORT
-       Stage 2 : eat all but abort interrupts
-       Stage 3 : eat all interrupts
-     */
-    for (stage = 0;;) {
-	if (stage == 1) {
-	    NCR53c7x0_write8(hostdata->istat, ISTAT_ABRT);
-	    ++stage;
-	}
-	istat = NCR53c7x0_read8 (hostdata->istat);
-	if (istat & ISTAT_SIP) {
-	    tmp = NCR53c7x0_read8(SSTAT0_REG);
-	} else if (istat & ISTAT_DIP) {
-	    tmp = NCR53c7x0_read8(DSTAT_REG);
-	    if (stage == 2) {
-		if (tmp & DSTAT_ABRT) {
-		    NCR53c7x0_write8(hostdata->istat, 0);
-		    ++stage;
-		} else {
-		    printk(KERN_ALERT "scsi%d : could not halt NCR chip\n", 
-			host->host_no);
-		    disable (host);
-	    	}
-    	    }
-	}
-	if (!(istat & (ISTAT_SIP|ISTAT_DIP))) {
-	    if (stage == 0)
-	    	++stage;
-	    else if (stage == 3)
-		break;
-	}
-    }
-    hostdata->state = STATE_HALTED;
-    local_irq_restore(flags);
-#if 0
-    print_lots (host);
-#endif
-    return 0;
-}
-
-/* 
- * Function: event_name (int event)
- * 
- * Purpose: map event enum into user-readable strings.
- */
-
-static const char *
-event_name (int event) {
-    switch (event) {
-    case EVENT_NONE:		return "none";
-    case EVENT_ISSUE_QUEUE:	return "to issue queue";
-    case EVENT_START_QUEUE:	return "to start queue";
-    case EVENT_SELECT:		return "selected";
-    case EVENT_DISCONNECT:	return "disconnected";
-    case EVENT_RESELECT:	return "reselected";
-    case EVENT_COMPLETE:	return "completed";
-    case EVENT_IDLE:		return "idle";
-    case EVENT_SELECT_FAILED:	return "select failed";
-    case EVENT_BEFORE_SELECT:	return "before select";
-    case EVENT_RESELECT_FAILED:	return "reselect failed";
-    default:			return "unknown";
-    }
-}
-
-/*
- * Function : void dump_events (struct Scsi_Host *host, count)
- *
- * Purpose : print last count events which have occurred.
- */ 
-static void
-dump_events (struct Scsi_Host *host, int count) {
-    struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
-	host->hostdata[0];
-    struct NCR53c7x0_event event;
-    int i;
-    unsigned long flags;
-    if (hostdata->events) {
-	if (count > hostdata->event_size)
-	    count = hostdata->event_size;
-	for (i = hostdata->event_index; count > 0; 
-	    i = (i ? i - 1 : hostdata->event_size -1), --count) {
-/*
- * By copying the event we're currently examining with interrupts
- * disabled, we can do multiple printk(), etc. operations and 
- * still be guaranteed that they're happening on the same 
- * event structure.
- */
-	    local_irq_save(flags);
-#if 0
-	    event = hostdata->events[i];
-#else
-	    memcpy ((void *) &event, (void *) &(hostdata->events[i]),
-		sizeof(event));
-#endif
-
-	    local_irq_restore(flags);
-	    printk ("scsi%d : %s event %d at %ld secs %ld usecs target %d lun %d\n",
-		host->host_no, event_name (event.event), count,
-		(long) event.time.tv_sec, (long) event.time.tv_usec,
-		event.target, event.lun);
-	    if (event.dsa) 
-		printk ("         event for dsa 0x%lx (virt 0x%p)\n", 
-		    virt_to_bus(event.dsa), event.dsa);
-	    if (event.pid != -1) {
-		printk ("         event for pid %ld ", event.pid);
-		__scsi_print_command (event.cmnd);
-	    }
-	}
-    }
-}
-
-/*
- * Function: check_address
- *
- * Purpose: Check to see if a possibly corrupt pointer will fault the 
- *	kernel.
- *
- * Inputs: addr - address; size - size of area
- *
- * Returns: 0 if area is OK, -1 on error.
- *
- * NOTES: should be implemented in terms of vverify on kernels 
- *	that have it.
- */
-
-static int 
-check_address (unsigned long addr, int size) {
-    return (virt_to_phys((void *)addr) < PAGE_SIZE || virt_to_phys((void *)(addr + size)) > virt_to_phys(high_memory) ?  -1 : 0);
-}
-
-#ifdef MODULE
-int 
-NCR53c7x0_release(struct Scsi_Host *host) {
-    struct NCR53c7x0_hostdata *hostdata = 
-	(struct NCR53c7x0_hostdata *) host->hostdata[0];
-    struct NCR53c7x0_cmd *cmd, *tmp;
-    shutdown (host);
-    if (host->irq != SCSI_IRQ_NONE)
-	{
-	    int irq_count;
-	    struct Scsi_Host *tmp;
-	    for (irq_count = 0, tmp = first_host; tmp; tmp = tmp->next)
-		if (tmp->hostt == the_template && tmp->irq == host->irq)
-		    ++irq_count;
-	    if (irq_count == 1)
-		free_irq(host->irq, NULL);
-	}
-    if (host->dma_channel != DMA_NONE)
-	free_dma(host->dma_channel);
-    if (host->io_port)
-	release_region(host->io_port, host->n_io_port);
-    
-    for (cmd = (struct NCR53c7x0_cmd *) hostdata->free; cmd; cmd = tmp, 
-	--hostdata->num_cmds) {
-	tmp = (struct NCR53c7x0_cmd *) cmd->next;
-    /* 
-     * If we're going to loop, try to stop it to get a more accurate
-     * count of the leaked commands.
-     */
-	cmd->next = NULL;
-	if (cmd->free)
-	    cmd->free ((void *) cmd->real, cmd->size);
-    }
-    if (hostdata->num_cmds)
-	printk ("scsi%d : leaked %d NCR53c7x0_cmd structures\n",
-	    host->host_no, hostdata->num_cmds);
-
-    vfree(hostdata->events);
-
-    /* XXX This assumes default cache mode to be IOMAP_FULL_CACHING, which
-     * XXX may be invalid (CONFIG_060_WRITETHROUGH)
-     */
-    kernel_set_cachemode((void *)hostdata, 8192, IOMAP_FULL_CACHING);
-    free_pages ((u32)hostdata, 1);
-    return 1;
-}
-#endif /* def MODULE */
diff --git a/drivers/scsi/53c7xx.h b/drivers/scsi/53c7xx.h
deleted file mode 100644
index 218f3b90153..00000000000
--- a/drivers/scsi/53c7xx.h
+++ /dev/null
@@ -1,1608 +0,0 @@
-/*
- * 53c710 driver.  Modified from Drew Eckhardts driver
- * for 53c810 by Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * I have left the code for the 53c8xx family in here, because it didn't
- * seem worth removing it.  The possibility of IO_MAPPED chips rather
- * than MEMORY_MAPPED remains, in case someone wants to add support for
- * 53c710 chips on Intel PCs (some older machines have them on the
- * motherboard).
- *
- * NOTE THERE MAY BE PROBLEMS WITH CASTS IN read8 AND Co.
- */
-
-/*
- * NCR 53c{7,8}0x0 driver, header file
- *
- * Sponsored by
- *      iX Multiuser Multitasking Magazine
- *	Hannover, Germany
- *	hm@ix.de	
- *
- * Copyright 1993, 1994, 1995 Drew Eckhardt
- *      Visionary Computing 
- *      (Unix and Linux consulting and custom programming)
- *      drew@PoohSticks.ORG
- *	+1 (303) 786-7975
- *
- * TolerANT and SCSI SCRIPTS are registered trademarks of NCR Corporation.
- * 
- * PRE-ALPHA
- *
- * For more information, please consult 
- *
- * NCR 53C700/53C700-66
- * SCSI I/O Processor
- * Data Manual
- *
- * NCR 53C810
- * PCI-SCSI I/O Processor 
- * Data Manual
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * +1 (719) 578-3400
- *
- * Toll free literature number
- * +1 (800) 334-5454
- *
- */
-
-#ifndef NCR53c710_H
-#define NCR53c710_H
-
-#ifndef HOSTS_C
-
-/* SCSI control 0 rw, default = 0xc0 */ 
-#define SCNTL0_REG 		0x00	
-#define SCNTL0_ARB1		0x80	/* 0 0 = simple arbitration */
-#define SCNTL0_ARB2		0x40	/* 1 1 = full arbitration */
-#define SCNTL0_STRT		0x20	/* Start Sequence */
-#define SCNTL0_WATN		0x10	/* Select with ATN */
-#define SCNTL0_EPC		0x08	/* Enable parity checking */
-/* Bit 2 is reserved on 800 series chips */
-#define SCNTL0_EPG_700		0x04	/* Enable parity generation */
-#define SCNTL0_AAP		0x02	/*  ATN/ on parity error */
-#define SCNTL0_TRG		0x01	/* Target mode */
-
-/* SCSI control 1 rw, default = 0x00 */
-
-#define SCNTL1_REG 		0x01	
-#define SCNTL1_EXC		0x80	/* Extra Clock Cycle of Data setup */
-#define SCNTL1_ADB		0x40	/*  contents of SODL on bus */
-#define SCNTL1_ESR_700		0x20	/* Enable SIOP response to selection 
-					   and reselection */
-#define SCNTL1_DHP_800		0x20	/* Disable halt on parity error or ATN
-					   target mode only */
-#define SCNTL1_CON		0x10	/* Connected */
-#define SCNTL1_RST		0x08	/* SCSI RST/ */
-#define SCNTL1_AESP		0x04	/* Force bad parity */
-#define SCNTL1_SND_700		0x02	/* Start SCSI send */
-#define SCNTL1_IARB_800		0x02	/* Immediate Arbitration, start
-					   arbitration immediately after
-					   busfree is detected */
-#define SCNTL1_RCV_700		0x01	/* Start SCSI receive */
-#define SCNTL1_SST_800		0x01	/* Start SCSI transfer */
-
-/* SCSI control 2 rw, */
-
-#define SCNTL2_REG_800		0x02	
-#define SCNTL2_800_SDU		0x80	/* SCSI disconnect unexpected */
-
-/* SCSI control 3 rw */
-
-#define SCNTL3_REG_800 		0x03	
-#define SCNTL3_800_SCF_SHIFT	4
-#define SCNTL3_800_SCF_MASK	0x70
-#define SCNTL3_800_SCF2		0x40	/* Synchronous divisor */
-#define SCNTL3_800_SCF1		0x20	/* 0x00 = SCLK/3 */
-#define SCNTL3_800_SCF0		0x10	/* 0x10 = SCLK/1 */
-					/* 0x20 = SCLK/1.5 
-					   0x30 = SCLK/2 
-					   0x40 = SCLK/3 */
-	    
-#define SCNTL3_800_CCF_SHIFT	0
-#define SCNTL3_800_CCF_MASK	0x07
-#define SCNTL3_800_CCF2		0x04	/* 0x00 50.01 to 66 */
-#define SCNTL3_800_CCF1		0x02	/* 0x01 16.67 to 25 */
-#define SCNTL3_800_CCF0		0x01	/* 0x02	25.01 - 37.5 
-					   0x03	37.51 - 50 
-					   0x04 50.01 - 66 */
-
-/*  
- * SCSI destination ID rw - the appropriate bit is set for the selected
- * target ID.  This is written by the SCSI SCRIPTS processor.
- * default = 0x00
- */
-#define SDID_REG_700  		0x02	
-#define SDID_REG_800		0x06
-
-#define GP_REG_800		0x07	/* General purpose IO */
-#define GP_800_IO1		0x02
-#define GP_800_IO2		0x01
-
-/* SCSI interrupt enable rw, default = 0x00 */
-#define SIEN_REG_700		0x03	
-#define SIEN0_REG_800		0x40
-#define SIEN_MA			0x80	/* Phase mismatch (ini) or ATN (tgt) */
-#define SIEN_FC			0x40	/* Function complete */
-#define SIEN_700_STO		0x20	/* Selection or reselection timeout */
-#define SIEN_800_SEL		0x20	/* Selected */
-#define SIEN_700_SEL		0x10	/* Selected or reselected */
-#define SIEN_800_RESEL		0x10	/* Reselected */
-#define SIEN_SGE		0x08	/* SCSI gross error */
-#define SIEN_UDC		0x04	/* Unexpected disconnect */
-#define SIEN_RST		0x02	/* SCSI RST/ received */
-#define SIEN_PAR		0x01	/* Parity error */
-
-/* 
- * SCSI chip ID rw
- * NCR53c700 : 
- * 	When arbitrating, the highest bit is used, when reselection or selection
- * 	occurs, the chip responds to all IDs for which a bit is set.
- * 	default = 0x00 
- * NCR53c810 : 
- *	Uses bit mapping
- */
-#define SCID_REG		0x04	
-/* Bit 7 is reserved on 800 series chips */
-#define SCID_800_RRE		0x40	/* Enable response to reselection */
-#define SCID_800_SRE		0x20	/* Enable response to selection */
-/* Bits four and three are reserved on 800 series chips */
-#define SCID_800_ENC_MASK	0x07	/* Encoded SCSI ID */
-
-/* SCSI transfer rw, default = 0x00 */
-#define SXFER_REG		0x05
-#define SXFER_DHP		0x80	/* Disable halt on parity */
-
-#define SXFER_TP2		0x40	/* Transfer period msb */
-#define SXFER_TP1		0x20
-#define SXFER_TP0		0x10	/* lsb */
-#define SXFER_TP_MASK		0x70
-/* FIXME : SXFER_TP_SHIFT == 5 is right for '8xx chips */
-#define SXFER_TP_SHIFT		5
-#define SXFER_TP_4		0x00	/* Divisors */
-#define SXFER_TP_5		0x10<<1
-#define SXFER_TP_6		0x20<<1
-#define SXFER_TP_7		0x30<<1
-#define SXFER_TP_8		0x40<<1
-#define SXFER_TP_9		0x50<<1
-#define SXFER_TP_10		0x60<<1
-#define SXFER_TP_11		0x70<<1
-
-#define SXFER_MO3		0x08	/* Max offset msb */
-#define SXFER_MO2		0x04
-#define SXFER_MO1		0x02
-#define SXFER_MO0		0x01	/* lsb */
-#define SXFER_MO_MASK		0x0f
-#define SXFER_MO_SHIFT		0
-
-/* 
- * SCSI output data latch rw
- * The contents of this register are driven onto the SCSI bus when 
- * the Assert Data Bus bit of the SCNTL1 register is set and 
- * the CD, IO, and MSG bits of the SOCL register match the SCSI phase
- */
-#define SODL_REG_700		0x06	
-#define SODL_REG_800		0x54
-
-
-/* 
- * SCSI output control latch rw, default = 0 
- * Note that when the chip is being manually programmed as an initiator,
- * the MSG, CD, and IO bits must be set correctly for the phase the target
- * is driving the bus in.  Otherwise no data transfer will occur due to 
- * phase mismatch.
- */
-
-#define SOCL_REG		0x07
-#define SOCL_REQ		0x80	/*  REQ */
-#define SOCL_ACK		0x40	/*  ACK */
-#define SOCL_BSY		0x20	/*  BSY */
-#define SOCL_SEL		0x10	/*  SEL */
-#define SOCL_ATN		0x08	/*  ATN */
-#define SOCL_MSG		0x04	/*  MSG */
-#define SOCL_CD			0x02	/*  C/D */
-#define SOCL_IO			0x01	/*  I/O */
-
-/* 
- * SCSI first byte received latch ro 
- * This register contains the first byte received during a block MOVE 
- * SCSI SCRIPTS instruction, including
- * 
- * Initiator mode	Target mode
- * Message in		Command
- * Status		Message out
- * Data in		Data out
- *
- * It also contains the selecting or reselecting device's ID and our 
- * ID.
- *
- * Note that this is the register the various IF conditionals can 
- * operate on.
- */
-#define SFBR_REG		0x08	
-
-/* 
- * SCSI input data latch ro
- * In initiator mode, data is latched into this register on the rising
- * edge of REQ/. In target mode, data is latched on the rising edge of 
- * ACK/
- */
-#define SIDL_REG_700		0x09
-#define SIDL_REG_800		0x50
-
-/* 
- * SCSI bus data lines ro 
- * This register reflects the instantaneous status of the SCSI data 
- * lines.  Note that SCNTL0 must be set to disable parity checking, 
- * otherwise reading this register will latch new parity.
- */
-#define SBDL_REG_700		0x0a
-#define SBDL_REG_800		0x58
-
-#define SSID_REG_800		0x0a
-#define SSID_800_VAL		0x80	/* Exactly two bits asserted at sel */
-#define SSID_800_ENCID_MASK	0x07	/* Device which performed operation */
-
-
-/* 
- * SCSI bus control lines rw, 
- * instantaneous readout of control lines 
- */
-#define SBCL_REG		0x0b 	
-#define SBCL_REQ		0x80	/*  REQ ro */
-#define SBCL_ACK		0x40	/*  ACK ro */
-#define SBCL_BSY		0x20	/*  BSY ro */
-#define SBCL_SEL		0x10	/*  SEL ro */
-#define SBCL_ATN		0x08	/*  ATN ro */
-#define SBCL_MSG		0x04	/*  MSG ro */
-#define SBCL_CD			0x02	/*  C/D ro */
-#define SBCL_IO			0x01	/*  I/O ro */
-#define SBCL_PHASE_CMDOUT	SBCL_CD
-#define SBCL_PHASE_DATAIN	SBCL_IO
-#define SBCL_PHASE_DATAOUT	0
-#define SBCL_PHASE_MSGIN	(SBCL_CD|SBCL_IO|SBCL_MSG)
-#define SBCL_PHASE_MSGOUT	(SBCL_CD|SBCL_MSG)
-#define SBCL_PHASE_STATIN	(SBCL_CD|SBCL_IO)
-#define SBCL_PHASE_MASK		(SBCL_CD|SBCL_IO|SBCL_MSG)
-/* 
- * Synchronous SCSI Clock Control bits 
- * 0 - set by DCNTL 
- * 1 - SCLK / 1.0
- * 2 - SCLK / 1.5
- * 3 - SCLK / 2.0 
- */
-#define SBCL_SSCF1		0x02	/* wo, -66 only */
-#define SBCL_SSCF0		0x01	/* wo, -66 only */
-#define SBCL_SSCF_MASK		0x03
-
-/* 
- * XXX note : when reading the DSTAT and STAT registers to clear interrupts,
- * insure that 10 clocks elapse between the two  
- */
-/* DMA status ro */
-#define DSTAT_REG		0x0c	
-#define DSTAT_DFE		0x80	/* DMA FIFO empty */
-#define DSTAT_800_MDPE		0x40	/* Master Data Parity Error */
-#define DSTAT_800_BF		0x20	/* Bus Fault */
-#define DSTAT_ABRT		0x10	/* Aborted - set on error */
-#define DSTAT_SSI		0x08	/* SCRIPTS single step interrupt */
-#define DSTAT_SIR		0x04	/* SCRIPTS interrupt received - 
-					   set when INT instruction is 
-					   executed */
-#define DSTAT_WTD		0x02	/* Watchdog timeout detected */
-#define DSTAT_OPC		0x01	/* Illegal instruction */
-#define DSTAT_800_IID		0x01	/* Same thing, different name */
-
-
-/* NCR53c800 moves this stuff into SIST0 */
-#define SSTAT0_REG		0x0d	/* SCSI status 0 ro */
-#define SIST0_REG_800		0x42	
-#define SSTAT0_MA		0x80	/* ini : phase mismatch,
-					 * tgt : ATN/ asserted 
-					 */
-#define SSTAT0_CMP		0x40	/* function complete */
-#define SSTAT0_700_STO		0x20	/* Selection or reselection timeout */
-#define SIST0_800_SEL		0x20	/* Selected */
-#define SSTAT0_700_SEL		0x10	/* Selected or reselected */
-#define SIST0_800_RSL		0x10	/* Reselected */
-#define SSTAT0_SGE		0x08	/* SCSI gross error */
-#define SSTAT0_UDC		0x04	/* Unexpected disconnect */
-#define SSTAT0_RST		0x02	/* SCSI RST/ received */
-#define SSTAT0_PAR		0x01	/* Parity error */
-
-/* And uses SSTAT0 for what was SSTAT1 */
-
-#define SSTAT1_REG		0x0e	/* SCSI status 1 ro */
-#define SSTAT1_ILF		0x80	/* SIDL full */
-#define SSTAT1_ORF		0x40	/* SODR full */
-#define SSTAT1_OLF		0x20	/* SODL full */
-#define SSTAT1_AIP		0x10	/* Arbitration in progress */
-#define SSTAT1_LOA		0x08	/* Lost arbitration */
-#define SSTAT1_WOA		0x04	/* Won arbitration */
-#define SSTAT1_RST		0x02	/* Instant readout of RST/ */
-#define SSTAT1_SDP		0x01	/* Instant readout of SDP/ */
-
-#define SSTAT2_REG		0x0f	/* SCSI status 2 ro */
-#define SSTAT2_FF3		0x80 	/* number of bytes in synchronous */
-#define SSTAT2_FF2		0x40	/* data FIFO */
-#define SSTAT2_FF1		0x20	
-#define SSTAT2_FF0		0x10
-#define SSTAT2_FF_MASK		0xf0
-#define SSTAT2_FF_SHIFT		4
-
-/* 
- * Latched signals, latched on the leading edge of REQ/ for initiators,
- * ACK/ for targets.
- */
-#define SSTAT2_SDP		0x08	/* SDP */
-#define SSTAT2_MSG		0x04	/* MSG */
-#define SSTAT2_CD		0x02	/* C/D */
-#define SSTAT2_IO		0x01	/* I/O */
-#define SSTAT2_PHASE_CMDOUT	SSTAT2_CD
-#define SSTAT2_PHASE_DATAIN	SSTAT2_IO
-#define SSTAT2_PHASE_DATAOUT	0
-#define SSTAT2_PHASE_MSGIN	(SSTAT2_CD|SSTAT2_IO|SSTAT2_MSG)
-#define SSTAT2_PHASE_MSGOUT	(SSTAT2_CD|SSTAT2_MSG)
-#define SSTAT2_PHASE_STATIN	(SSTAT2_CD|SSTAT2_IO)
-#define SSTAT2_PHASE_MASK	(SSTAT2_CD|SSTAT2_IO|SSTAT2_MSG)
-
-
-/* NCR53c700-66 only */
-#define SCRATCHA_REG_00		0x10    /* through  0x13 Scratch A rw */
-/* NCR53c710 and higher */
-#define DSA_REG			0x10	/* DATA structure address */
-
-#define CTEST0_REG_700		0x14	/* Chip test 0 ro */
-#define CTEST0_REG_800		0x18	/* Chip test 0 rw, general purpose */
-/* 0x80 - 0x04 are reserved */
-#define CTEST0_700_RTRG		0x02	/* Real target mode */
-#define CTEST0_700_DDIR		0x01	/* Data direction, 1 = 
-					 * SCSI bus to host, 0  =
-					 * host to SCSI.
-					 */
-
-#define CTEST1_REG_700		0x15	/* Chip test 1 ro */
-#define CTEST1_REG_800		0x19	/* Chip test 1 ro */
-#define CTEST1_FMT3		0x80	/* Identify which byte lanes are empty */
-#define CTEST1_FMT2		0x40 	/* in the DMA FIFO */
-#define CTEST1_FMT1		0x20
-#define CTEST1_FMT0		0x10
-
-#define CTEST1_FFL3		0x08	/* Identify which bytes lanes are full */
-#define CTEST1_FFL2		0x04	/* in the DMA FIFO */
-#define CTEST1_FFL1		0x02
-#define CTEST1_FFL0		0x01
-
-#define CTEST2_REG_700		0x16	/* Chip test 2 ro */
-#define CTEST2_REG_800		0x1a	/* Chip test 2 ro */
-
-#define CTEST2_800_DDIR		0x80	/* 1 = SCSI->host */
-#define CTEST2_800_SIGP		0x40	/* A copy of SIGP in ISTAT.
-					   Reading this register clears */
-#define CTEST2_800_CIO		0x20	/* Configured as IO */.
-#define CTEST2_800_CM		0x10	/* Configured as memory */
-
-/* 0x80 - 0x40 are reserved on 700 series chips */
-#define CTEST2_700_SOFF		0x20	/* SCSI Offset Compare,
-					 * As an initiator, this bit is 
-					 * one when the synchronous offset
-					 * is zero, as a target this bit 
-					 * is one when the synchronous 
-					 * offset is at the maximum
-					 * defined in SXFER
-					 */
-#define CTEST2_700_SFP		0x10	/* SCSI FIFO parity bit,
-					 * reading CTEST3 unloads a byte
-					 * from the FIFO and sets this
-					 */
-#define CTEST2_700_DFP		0x08	/* DMA FIFO parity bit,
-					 * reading CTEST6 unloads a byte
-					 * from the FIFO and sets this
-					 */
-#define CTEST2_TEOP		0x04	/* SCSI true end of process,
-					 * indicates a totally finished
-					 * transfer
-					 */
-#define CTEST2_DREQ		0x02	/* Data request signal */
-/* 0x01 is reserved on 700 series chips */
-#define CTEST2_800_DACK		0x01	
-
-/* 
- * Chip test 3 ro 
- * Unloads the bottom byte of the eight deep SCSI synchronous FIFO,
- * check SSTAT2 FIFO full bits to determine size.  Note that a GROSS
- * error results if a read is attempted on this register.  Also note 
- * that 16 and 32 bit reads of this register will cause corruption.
- */
-#define CTEST3_REG_700		0x17	
-/*  Chip test 3 rw */
-#define CTEST3_REG_800		0x1b
-#define CTEST3_800_V3		0x80	/* Chip revision */
-#define CTEST3_800_V2		0x40
-#define CTEST3_800_V1		0x20
-#define CTEST3_800_V0		0x10
-#define CTEST3_800_FLF		0x08	/* Flush DMA FIFO */
-#define CTEST3_800_CLF		0x04	/* Clear DMA FIFO */
-#define CTEST3_800_FM		0x02	/* Fetch mode pin */
-/* bit 0 is reserved on 800 series chips */
-
-#define CTEST4_REG_700		0x18	/* Chip test 4 rw */
-#define CTEST4_REG_800		0x21	/* Chip test 4 rw */
-/* 0x80 is reserved on 700 series chips */
-#define CTEST4_800_BDIS		0x80	/* Burst mode disable */
-#define CTEST4_ZMOD		0x40	/* High impedance mode */
-#define CTEST4_SZM		0x20	/* SCSI bus high impedance */
-#define CTEST4_700_SLBE		0x10	/* SCSI loopback enabled */
-#define CTEST4_800_SRTM		0x10	/* Shadow Register Test Mode */
-#define CTEST4_700_SFWR		0x08	/* SCSI FIFO write enable, 
-					 * redirects writes from SODL
-					 * to the SCSI FIFO.
-					 */
-#define CTEST4_800_MPEE		0x08	/* Enable parity checking
-					   during master cycles on PCI
-					   bus */
-
-/* 
- * These bits send the contents of the CTEST6 register to the appropriate
- * byte lane of the 32 bit DMA FIFO.  Normal operation is zero, otherwise 
- * the high bit means the low two bits select the byte lane.
- */
-#define CTEST4_FBL2		0x04	
-#define CTEST4_FBL1		0x02
-#define CTEST4_FBL0		0x01	
-#define CTEST4_FBL_MASK		0x07
-#define CTEST4_FBL_0		0x04	/* Select DMA FIFO byte lane 0 */
-#define CTEST4_FBL_1		0x05	/* Select DMA FIFO byte lane 1 */
-#define CTEST4_FBL_2		0x06	/* Select DMA FIFO byte lane 2 */
-#define CTEST4_FBL_3		0x07	/* Select DMA FIFO byte lane 3 */
-#define CTEST4_800_SAVE		(CTEST4_800_BDIS)
-
-
-#define CTEST5_REG_700		0x19	/* Chip test 5 rw */
-#define CTEST5_REG_800		0x22	/* Chip test 5 rw */
-/* 
- * Clock Address Incrementor.  When set, it increments the 
- * DNAD register to the next bus size boundary.  It automatically 
- * resets itself when the operation is complete.
- */
-#define CTEST5_ADCK		0x80
-/*
- * Clock Byte Counter.  When set, it decrements the DBC register to
- * the next bus size boundary.
- */
-#define CTEST5_BBCK		0x40
-/*
- * Reset SCSI Offset.  Setting this bit to 1 clears the current offset
- * pointer in the SCSI synchronous offset counter (SSTAT).  This bit
- * is set to 1 if a SCSI Gross Error Condition occurs.  The offset should
- * be cleared when a synchronous transfer fails.  When written, it is 
- * automatically cleared after the SCSI synchronous offset counter is 
- * reset.
- */
-/* Bit 5 is reserved on 800 series chips */
-#define CTEST5_700_ROFF		0x20
-/* 
- * Master Control for Set or Reset pulses. When 1, causes the low 
- * four bits of register to set when set, 0 causes the low bits to
- * clear when set.
- */
-#define CTEST5_MASR 		0x10	
-#define CTEST5_DDIR		0x08	/* DMA direction */
-/*
- * Bits 2-0 are reserved on 800 series chips
- */
-#define CTEST5_700_EOP		0x04	/* End of process */
-#define CTEST5_700_DREQ		0x02	/* Data request */
-#define CTEST5_700_DACK		0x01	/* Data acknowledge */
-
-/* 
- * Chip test 6 rw - writing to this register writes to the byte 
- * lane in the DMA FIFO as determined by the FBL bits in the CTEST4
- * register.
- */
-#define CTEST6_REG_700		0x1a
-#define CTEST6_REG_800		0x23
-
-#define CTEST7_REG		0x1b	/* Chip test 7 rw */
-/* 0x80 - 0x40 are reserved on NCR53c700 and NCR53c700-66 chips */
-#define CTEST7_10_CDIS		0x80	/* Cache burst disable */
-#define CTEST7_10_SC1		0x40	/* Snoop control bits */
-#define CTEST7_10_SC0		0x20	
-#define CTEST7_10_SC_MASK	0x60
-/* 0x20 is reserved on the NCR53c700 */
-#define CTEST7_0060_FM		0x20	/* Fetch mode */
-#define CTEST7_STD		0x10	/* Selection timeout disable */
-#define CTEST7_DFP		0x08	/* DMA FIFO parity bit for CTEST6 */
-#define CTEST7_EVP		0x04	/* 1 = host bus even parity, 0 = odd */
-#define CTEST7_10_TT1		0x02	/* Transfer type */
-#define CTEST7_00_DC		0x02	/* Set to drive DC low during instruction 
-					   fetch */
-#define CTEST7_DIFF		0x01	/* Differential mode */
-
-#define CTEST7_SAVE ( CTEST7_EVP | CTEST7_DIFF )
-
-
-#define TEMP_REG		0x1c	/* through 0x1f Temporary stack rw */
-
-#define DFIFO_REG		0x20	/* DMA FIFO rw */
-/* 
- * 0x80 is reserved on the NCR53c710, the CLF and FLF bits have been
- * moved into the CTEST8 register.
- */
-#define DFIFO_00_FLF		0x80	/* Flush DMA FIFO to memory */
-#define DFIFO_00_CLF		0x40	/* Clear DMA and SCSI FIFOs */
-#define DFIFO_BO6		0x40
-#define DFIFO_BO5		0x20
-#define DFIFO_BO4		0x10
-#define DFIFO_BO3		0x08
-#define DFIFO_BO2		0x04 
-#define DFIFO_BO1		0x02
-#define DFIFO_BO0		0x01
-#define DFIFO_10_BO_MASK	0x7f	/* 7 bit counter */
-#define DFIFO_00_BO_MASK	0x3f	/* 6 bit counter */
-
-/* 
- * Interrupt status rw 
- * Note that this is the only register which can be read while SCSI
- * SCRIPTS are being executed.
- */
-#define ISTAT_REG_700		0x21
-#define ISTAT_REG_800		0x14
-#define ISTAT_ABRT		0x80	/* Software abort, write 
-					 *1 to abort, wait for interrupt. */
-/* 0x40 and 0x20 are reserved on NCR53c700 and NCR53c700-66 chips */
-#define ISTAT_10_SRST		0x40	/* software reset */
-#define ISTAT_10_SIGP		0x20	/* signal script */
-/* 0x10 is reserved on NCR53c700 series chips */
-#define ISTAT_800_SEM		0x10	/* semaphore */
-#define ISTAT_CON		0x08	/* 1 when connected */
-#define ISTAT_800_INTF		0x04	/* Interrupt on the fly */
-#define ISTAT_700_PRE		0x04	/* Pointer register empty.
-					 * Set to 1 when DSPS and DSP
-					 * registers are empty in pipeline
-					 * mode, always set otherwise.
-					 */
-#define ISTAT_SIP		0x02	/* SCSI interrupt pending from
-					 * SCSI portion of SIOP see
-					 * SSTAT0
-					 */
-#define ISTAT_DIP		0x01	/* DMA interrupt pending 
-					 * see DSTAT
-					 */
-
-/* NCR53c700-66 and NCR53c710 only */
-#define CTEST8_REG		0x22	/* Chip test 8 rw */
-#define CTEST8_0066_EAS		0x80	/* Enable alternate SCSI clock,
-					 * ie read from SCLK/ rather than CLK/
-					 */
-#define CTEST8_0066_EFM		0x40	/* Enable fetch and master outputs */
-#define CTEST8_0066_GRP		0x20	/* Generate Receive Parity for 
-					 * pass through.  This insures that 
-					 * bad parity won't reach the host 
-					 * bus.
-					 */
-#define CTEST8_0066_TE		0x10	/* TolerANT enable.  Enable 
-					 * active negation, should only
-					 * be used for slow SCSI 
-					 * non-differential.
-					 */
-#define CTEST8_0066_HSC		0x08	/* Halt SCSI clock */
-#define CTEST8_0066_SRA		0x04	/* Shorten REQ/ACK filtering,
-					 * must be set for fast SCSI-II
-					 * speeds.
-					 */
-#define CTEST8_0066_DAS		0x02	/* Disable automatic target/initiator
-					 * switching.
-					 */
-#define CTEST8_0066_LDE		0x01	/* Last disconnect enable.
-					 * The status of pending 
-					 * disconnect is maintained by
-					 * the core, eliminating
-					 * the possibility of missing a 
-					 * selection or reselection
-					 * while waiting to fetch a 
-					 * WAIT DISCONNECT opcode.
-					 */
-
-#define CTEST8_10_V3		0x80	/* Chip revision */
-#define CTEST8_10_V2		0x40
-#define CTEST8_10_V1		0x20	
-#define CTEST8_10_V0		0x10
-#define CTEST8_10_V_MASK	0xf0	
-#define CTEST8_10_FLF		0x08	/* Flush FIFOs */
-#define CTEST8_10_CLF		0x04	/* Clear FIFOs */
-#define CTEST8_10_FM		0x02	/* Fetch pin mode */
-#define CTEST8_10_SM		0x01	/* Snoop pin mode */
-
-
-/* 
- * The CTEST9 register may be used to differentiate between a
- * NCR53c700 and a NCR53c710.  
- *
- * Write 0xff to this register.
- * Read it.
- * If the contents are 0xff, it is a NCR53c700
- * If the contents are 0x00, it is a NCR53c700-66 first revision
- * If the contents are some other value, it is some other NCR53c700-66
- */
-#define CTEST9_REG_00		0x23	/* Chip test 9 ro */
-#define LCRC_REG_10		0x23	
-
-/*
- * 0x24 through 0x27 are the DMA byte counter register.  Instructions
- * write their high 8 bits into the DCMD register, the low 24 bits into
- * the DBC register.
- *
- * Function is dependent on the command type being executed.
- */
-
- 
-#define DBC_REG			0x24
-/* 
- * For Block Move Instructions, DBC is a 24 bit quantity representing 
- *     the number of bytes to transfer.
- * For Transfer Control Instructions, DBC is bit fielded as follows : 
- */
-/* Bits 20 - 23 should be clear */
-#define DBC_TCI_TRUE		(1 << 19) 	/* Jump when true */
-#define DBC_TCI_COMPARE_DATA	(1 << 18)	/* Compare data */
-#define DBC_TCI_COMPARE_PHASE	(1 << 17)	/* Compare phase with DCMD field */
-#define DBC_TCI_WAIT_FOR_VALID	(1 << 16)	/* Wait for REQ */
-/* Bits 8 - 15 are reserved on some implementations ? */
-#define DBC_TCI_MASK_MASK	0xff00 		/* Mask for data compare */
-#define DBC_TCI_MASK_SHIFT	8
-#define DBC_TCI_DATA_MASK	0xff		/* Data to be compared */ 
-#define DBC_TCI_DATA_SHIFT	0
-
-#define DBC_RWRI_IMMEDIATE_MASK	0xff00		/* Immediate data */
-#define DBC_RWRI_IMMEDIATE_SHIFT 8		/* Amount to shift */
-#define DBC_RWRI_ADDRESS_MASK	0x3f0000	/* Register address */
-#define DBC_RWRI_ADDRESS_SHIFT 	16
-
-
-/*
- * DMA command r/w
- */
-#define DCMD_REG		0x27	
-#define DCMD_TYPE_MASK		0xc0	/* Masks off type */
-#define DCMD_TYPE_BMI		0x00	/* Indicates a Block Move instruction */
-#define DCMD_BMI_IO		0x01	/* I/O, CD, and MSG bits selecting   */
-#define DCMD_BMI_CD		0x02	/* the phase for the block MOVE      */
-#define DCMD_BMI_MSG		0x04	/* instruction 			     */
-
-#define DCMD_BMI_OP_MASK	0x18	/* mask for opcode */
-#define DCMD_BMI_OP_MOVE_T	0x00	/* MOVE */
-#define DCMD_BMI_OP_MOVE_I	0x08	/* MOVE Initiator */
-
-#define DCMD_BMI_INDIRECT	0x20	/*  Indirect addressing */
-
-#define DCMD_TYPE_TCI		0x80	/* Indicates a Transfer Control 
-					   instruction */
-#define DCMD_TCI_IO		0x01	/* I/O, CD, and MSG bits selecting   */
-#define DCMD_TCI_CD		0x02	/* the phase for the block MOVE      */
-#define DCMD_TCI_MSG		0x04	/* instruction 			     */
-#define DCMD_TCI_OP_MASK	0x38	/* mask for opcode */
-#define DCMD_TCI_OP_JUMP	0x00	/* JUMP */
-#define DCMD_TCI_OP_CALL	0x08	/* CALL */
-#define DCMD_TCI_OP_RETURN	0x10	/* RETURN */
-#define DCMD_TCI_OP_INT		0x18	/* INT */
-
-#define DCMD_TYPE_RWRI		0x40	/* Indicates I/O or register Read/Write
-					   instruction */
-#define DCMD_RWRI_OPC_MASK	0x38	/* Opcode mask */
-#define DCMD_RWRI_OPC_WRITE	0x28	/* Write SFBR to register */
-#define DCMD_RWRI_OPC_READ	0x30	/* Read register to SFBR */
-#define DCMD_RWRI_OPC_MODIFY	0x38	/* Modify in place */
-
-#define DCMD_RWRI_OP_MASK	0x07
-#define DCMD_RWRI_OP_MOVE	0x00
-#define DCMD_RWRI_OP_SHL	0x01
-#define DCMD_RWRI_OP_OR		0x02
-#define DCMD_RWRI_OP_XOR	0x03
-#define DCMD_RWRI_OP_AND	0x04
-#define DCMD_RWRI_OP_SHR	0x05
-#define DCMD_RWRI_OP_ADD	0x06
-#define DCMD_RWRI_OP_ADDC	0x07
-
-#define DCMD_TYPE_MMI		0xc0	/* Indicates a Memory Move instruction 
-					   (three words) */
-
-
-#define DNAD_REG		0x28	/* through 0x2b DMA next address for 
-					   data */
-#define DSP_REG			0x2c	/* through 0x2f DMA SCRIPTS pointer rw */
-#define DSPS_REG		0x30	/* through 0x33 DMA SCRIPTS pointer 
-					   save rw */
-#define DMODE_REG_00		0x34 	/* DMA mode rw */
-#define DMODE_00_BL1	0x80	/* Burst length bits */
-#define DMODE_00_BL0	0x40
-#define DMODE_BL_MASK	0xc0
-/* Burst lengths (800) */
-#define DMODE_BL_2	0x00	/* 2 transfer */
-#define DMODE_BL_4	0x40	/* 4 transfers */
-#define DMODE_BL_8	0x80	/* 8 transfers */
-#define DMODE_BL_16	0xc0	/* 16 transfers */
-
-#define DMODE_10_BL_1	0x00	/* 1 transfer */
-#define DMODE_10_BL_2	0x40	/* 2 transfers */
-#define DMODE_10_BL_4	0x80	/* 4 transfers */
-#define DMODE_10_BL_8	0xc0	/* 8 transfers */
-#define DMODE_10_FC2	0x20	/* Driven to FC2 pin */
-#define DMODE_10_FC1	0x10	/* Driven to FC1 pin */
-#define DMODE_710_PD	0x08	/* Program/data on FC0 pin */
-#define DMODE_710_UO	0x02	/* User prog. output */
-
-#define DMODE_700_BW16	0x20	/* Host buswidth = 16 */
-#define DMODE_700_286	0x10	/* 286 mode */
-#define DMODE_700_IOM	0x08	/* Transfer to IO port */
-#define DMODE_700_FAM	0x04	/* Fixed address mode */
-#define DMODE_700_PIPE	0x02	/* Pipeline mode disables 
-					 * automatic fetch / exec 
-					 */
-#define DMODE_MAN	0x01		/* Manual start mode, 
-					 * requires a 1 to be written
-					 * to the start DMA bit in the DCNTL
-					 * register to run scripts 
-					 */
-
-#define DMODE_700_SAVE ( DMODE_00_BL_MASK | DMODE_00_BW16 | DMODE_00_286 )
-
-/* NCR53c800 series only */
-#define SCRATCHA_REG_800	0x34	/* through 0x37 Scratch A rw */
-/* NCR53c710 only */
-#define SCRATCHB_REG_10		0x34	/* through 0x37 scratch B rw */
-
-#define DMODE_REG_10    	0x38	/* DMA mode rw, NCR53c710 and newer */
-#define DMODE_800_SIOM		0x20	/* Source IO = 1 */
-#define DMODE_800_DIOM		0x10	/* Destination IO = 1 */
-#define DMODE_800_ERL		0x08	/* Enable Read Line */
-
-/* 35-38 are reserved on 700 and 700-66 series chips */
-#define DIEN_REG		0x39	/* DMA interrupt enable rw */
-/* 0x80, 0x40, and 0x20 are reserved on 700-series chips */
-#define DIEN_800_MDPE		0x40	/* Master data parity error */
-#define DIEN_800_BF		0x20	/* BUS fault */
-#define DIEN_700_BF		0x20	/* BUS fault */
-#define DIEN_ABRT		0x10	/* Enable aborted interrupt */
-#define DIEN_SSI		0x08	/* Enable single step interrupt */
-#define DIEN_SIR		0x04	/* Enable SCRIPTS INT command 
-					 * interrupt
-					 */
-/* 0x02 is reserved on 800 series chips */
-#define DIEN_700_WTD		0x02	/* Enable watchdog timeout interrupt */
-#define DIEN_700_OPC		0x01	/* Enable illegal instruction 
-					 * interrupt 
-					 */
-#define DIEN_800_IID		0x01	/*  Same meaning, different name */ 
-
-/*
- * DMA watchdog timer rw
- * set in 16 CLK input periods.
- */
-#define DWT_REG			0x3a
-
-/* DMA control rw */
-#define DCNTL_REG		0x3b
-#define DCNTL_700_CF1		0x80	/* Clock divisor bits */
-#define DCNTL_700_CF0		0x40
-#define DCNTL_700_CF_MASK	0xc0
-/* Clock divisors 			   Divisor SCLK range (MHZ) */
-#define DCNTL_700_CF_2		0x00    /* 2.0	   37.51-50.00 */
-#define DCNTL_700_CF_1_5	0x40	/* 1.5	   25.01-37.50 */
-#define DCNTL_700_CF_1		0x80	/* 1.0     16.67-25.00 */
-#define DCNTL_700_CF_3		0xc0	/* 3.0	   50.01-66.67 (53c700-66) */
-
-#define DCNTL_700_S16		0x20	/* Load scripts 16 bits at a time */
-#define DCNTL_SSM		0x10	/* Single step mode */
-#define DCNTL_700_LLM		0x08	/* Low level mode, can only be set 
-					 * after selection */
-#define DCNTL_800_IRQM		0x08	/* Totem pole IRQ pin */
-#define DCNTL_STD		0x04	/* Start DMA / SCRIPTS */
-/* 0x02 is reserved */
-#define DCNTL_00_RST		0x01	/* Software reset, resets everything
-					 * but 286 mode bit  in DMODE. On the
-					 * NCR53c710, this bit moved to CTEST8
-					 */
-#define DCNTL_10_COM		0x01	/* 700 software compatibility mode */
-#define DCNTL_10_EA		0x20	/* Enable Ack - needed for MVME16x */
-
-#define DCNTL_700_SAVE ( DCNTL_CF_MASK | DCNTL_S16)
-
-
-/* NCR53c700-66 only */
-#define SCRATCHB_REG_00		0x3c	/* through 0x3f scratch b rw */
-#define SCRATCHB_REG_800	0x5c	/* through 0x5f scratch b rw */
-/* NCR53c710 only */
-#define ADDER_REG_10		0x3c	/* Adder, NCR53c710 only */
-
-#define SIEN1_REG_800		0x41
-#define SIEN1_800_STO		0x04	/* selection/reselection timeout */
-#define SIEN1_800_GEN		0x02	/* general purpose timer */
-#define SIEN1_800_HTH		0x01	/* handshake to handshake */
-
-#define SIST1_REG_800		0x43
-#define SIST1_800_STO		0x04	/* selection/reselection timeout */
-#define SIST1_800_GEN		0x02	/* general purpose timer */
-#define SIST1_800_HTH		0x01	/* handshake to handshake */
-
-#define SLPAR_REG_800		0x44	/* Parity */
-
-#define MACNTL_REG_800		0x46	/* Memory access control */
-#define MACNTL_800_TYP3		0x80
-#define MACNTL_800_TYP2		0x40
-#define MACNTL_800_TYP1		0x20
-#define MACNTL_800_TYP0		0x10
-#define MACNTL_800_DWR		0x08
-#define MACNTL_800_DRD		0x04
-#define MACNTL_800_PSCPT	0x02
-#define MACNTL_800_SCPTS	0x01
-
-#define GPCNTL_REG_800		0x47	/* General Purpose Pin Control */
-
-/* Timeouts are expressed such that 0=off, 1=100us, doubling after that */
-#define STIME0_REG_800		0x48	/* SCSI Timer Register 0 */
-#define STIME0_800_HTH_MASK	0xf0	/* Handshake to Handshake timeout */
-#define STIME0_800_HTH_SHIFT	4
-#define STIME0_800_SEL_MASK	0x0f	/* Selection timeout */
-#define STIME0_800_SEL_SHIFT	0
-
-#define STIME1_REG_800		0x49
-#define STIME1_800_GEN_MASK	0x0f	/* General purpose timer */
-
-#define RESPID_REG_800		0x4a	/* Response ID, bit fielded.  8
-					   bits on narrow chips, 16 on WIDE */
-
-#define STEST0_REG_800		0x4c	
-#define STEST0_800_SLT		0x08	/* Selection response logic test */
-#define STEST0_800_ART		0x04	/* Arbitration priority encoder test */
-#define STEST0_800_SOZ		0x02	/* Synchronous offset zero */
-#define STEST0_800_SOM		0x01	/* Synchronous offset maximum */
-
-#define STEST1_REG_800		0x4d
-#define STEST1_800_SCLK		0x80	/* Disable SCSI clock */
-
-#define STEST2_REG_800		0x4e	
-#define STEST2_800_SCE		0x80	/* Enable SOCL/SODL */
-#define STEST2_800_ROF		0x40	/* Reset SCSI sync offset */
-#define STEST2_800_SLB		0x10	/* Enable SCSI loopback mode */
-#define STEST2_800_SZM		0x08	/* SCSI high impedance mode */
-#define STEST2_800_EXT		0x02	/* Extend REQ/ACK filter 30 to 60ns */
-#define STEST2_800_LOW		0x01	/* SCSI low level mode */
-
-#define STEST3_REG_800		0x4f	 
-#define STEST3_800_TE		0x80	/* Enable active negation */
-#define STEST3_800_STR		0x40	/* SCSI FIFO test read */
-#define STEST3_800_HSC		0x20	/* Halt SCSI clock */
-#define STEST3_800_DSI		0x10	/* Disable single initiator response */
-#define STEST3_800_TTM		0x04	/* Time test mode */
-#define STEST3_800_CSF		0x02	/* Clear SCSI FIFO */
-#define STEST3_800_STW		0x01	/* SCSI FIFO test write */
-
-#define OPTION_PARITY 		0x1	/* Enable parity checking */
-#define OPTION_TAGGED_QUEUE	0x2	/* Enable SCSI-II tagged queuing */
-#define OPTION_700		0x8	/* Always run NCR53c700 scripts */
-#define OPTION_INTFLY		0x10	/* Use INTFLY interrupts */
-#define OPTION_DEBUG_INTR	0x20	/* Debug interrupts */
-#define OPTION_DEBUG_INIT_ONLY	0x40	/* Run initialization code and 
-					   simple test code, return
-					   DID_NO_CONNECT if any SCSI
-					   commands are attempted. */
-#define OPTION_DEBUG_READ_ONLY	0x80	/* Return DID_ERROR if any 
-					   SCSI write is attempted */
-#define OPTION_DEBUG_TRACE	0x100	/* Animated trace mode, print 
-					   each address and instruction 
-					   executed to debug buffer. */
-#define OPTION_DEBUG_SINGLE	0x200	/* stop after executing one 
-					   instruction */
-#define OPTION_SYNCHRONOUS	0x400	/* Enable sync SCSI.  */
-#define OPTION_MEMORY_MAPPED	0x800	/* NCR registers have valid 
-					   memory mapping */
-#define OPTION_IO_MAPPED	0x1000  /* NCR registers have valid
-					     I/O mapping */
-#define OPTION_DEBUG_PROBE_ONLY	0x2000  /* Probe only, don't even init */
-#define OPTION_DEBUG_TESTS_ONLY	0x4000  /* Probe, init, run selected tests */
-#define OPTION_DEBUG_TEST0	0x08000 /* Run test 0 */
-#define OPTION_DEBUG_TEST1	0x10000 /* Run test 1 */
-#define OPTION_DEBUG_TEST2	0x20000 /* Run test 2 */
-#define OPTION_DEBUG_DUMP	0x40000 /* Dump commands */
-#define OPTION_DEBUG_TARGET_LIMIT 0x80000 /* Only talk to target+luns specified */
-#define OPTION_DEBUG_NCOMMANDS_LIMIT 0x100000 /* Limit the number of commands */
-#define OPTION_DEBUG_SCRIPT 0x200000 /* Print when checkpoints are passed */
-#define OPTION_DEBUG_FIXUP 0x400000 /* print fixup values */
-#define OPTION_DEBUG_DSA 0x800000
-#define OPTION_DEBUG_CORRUPTION	0x1000000	/* Detect script corruption */
-#define OPTION_DEBUG_SDTR       0x2000000	/* Debug SDTR problem */
-#define OPTION_DEBUG_MISMATCH 	0x4000000 	/* Debug phase mismatches */
-#define OPTION_DISCONNECT	0x8000000	/* Allow disconnect */
-#define OPTION_DEBUG_DISCONNECT 0x10000000	
-#define OPTION_ALWAYS_SYNCHRONOUS 0x20000000	/* Negotiate sync. transfers
-						   on power up */
-#define OPTION_DEBUG_QUEUES	0x80000000	
-#define OPTION_DEBUG_ALLOCATION 0x100000000LL
-#define OPTION_DEBUG_SYNCHRONOUS 0x200000000LL	/* Sanity check SXFER and 
-						   SCNTL3 registers */
-#define OPTION_NO_ASYNC	0x400000000LL		/* Don't automagically send
-						   SDTR for async transfers when
-						   we haven't been told to do
-						   a synchronous transfer. */
-#define OPTION_NO_PRINT_RACE 0x800000000LL	/* Don't print message when
-						   the reselect/WAIT DISCONNECT
-						   race condition hits */
-#if !defined(PERM_OPTIONS)
-#define PERM_OPTIONS 0
-#endif
-				
-/*
- * Some data which is accessed by the NCR chip must be 4-byte aligned.
- * For some hosts the default is less than that (eg. 68K uses 2-byte).
- * Alignment has only been forced where it is important; also if one
- * 32 bit structure field is aligned then it is assumed that following
- * 32 bit fields are also aligned.  Take care when adding fields
- * which are other than 32 bit.
- */
-
-struct NCR53c7x0_synchronous {
-    u32 select_indirect			/* Value used for indirect selection */
-	__attribute__ ((aligned (4)));
-    u32 sscf_710;			/* Used to set SSCF bits for 710 */
-    u32 script[8];			/* Size ?? Script used when target is 
-						reselected */
-    unsigned char synchronous_want[5];	/* Per target desired SDTR */
-/* 
- * Set_synchronous programs these, select_indirect and current settings after
- * int_debug_should show a match.
- */
-    unsigned char sxfer_sanity, scntl3_sanity;
-};
-
-#define CMD_FLAG_SDTR 		1	/* Initiating synchronous 
-					   transfer negotiation */
-#define CMD_FLAG_WDTR		2	/* Initiating wide transfer
-					   negotiation */
-#define CMD_FLAG_DID_SDTR	4	/* did SDTR */
-#define CMD_FLAG_DID_WDTR	8	/* did WDTR */
-
-struct NCR53c7x0_table_indirect {
-    u32 count;
-    void *address;
-};
-
-enum ncr_event { 
-    EVENT_NONE = 0,
-/* 
- * Order is IMPORTANT, since these must correspond to the event interrupts
- * in 53c7,8xx.scr 
- */
-
-    EVENT_ISSUE_QUEUE = 0x5000000,	/* 0 Command was added to issue queue */
-    EVENT_START_QUEUE,			/* 1 Command moved to start queue */
-    EVENT_SELECT,			/* 2 Command completed selection */
-    EVENT_DISCONNECT,			/* 3 Command disconnected */
-    EVENT_RESELECT,			/* 4 Command reselected */
-    EVENT_COMPLETE,		        /* 5 Command completed */
-    EVENT_IDLE,				/* 6 */
-    EVENT_SELECT_FAILED,		/* 7 */
-    EVENT_BEFORE_SELECT,		/* 8 */
-    EVENT_RESELECT_FAILED		/* 9 */
-};
-
-struct NCR53c7x0_event {
-    enum ncr_event event;	/* What type of event */
-    unsigned char target;
-    unsigned char lun;
-    struct timeval time;	
-    u32 *dsa;			/* What's in the DSA register now (virt) */
-/* 
- * A few things from that SCSI pid so we know what happened after 
- * the Scsi_Cmnd structure in question may have disappeared.
- */
-    unsigned long pid;		/* The SCSI PID which caused this 
-				   event */
-    unsigned char cmnd[12];
-};
-
-/*
- * Things in the NCR53c7x0_cmd structure are split into two parts :
- *
- * 1.  A fixed portion, for things which are not accessed directly by static NCR
- *	code (ie, are referenced only by the Linux side of the driver,
- *	or only by dynamically generated code).  
- *
- * 2.  The DSA portion, for things which are accessed directly by static NCR
- *	code.
- *
- * This is a little ugly, but it 
- * 1.  Avoids conflicts between the NCR code's picture of the structure, and 
- * 	Linux code's idea of what it looks like.
- *
- * 2.  Minimizes the pain in the Linux side of the code needed 
- * 	to calculate real dsa locations for things, etc.
- * 
- */
-
-struct NCR53c7x0_cmd {
-    void *real;				/* Real, unaligned address for
-					   free function */
-    void (* free)(void *, int);		/* Command to deallocate; NULL
-					   for structures allocated with
-					   scsi_register, etc. */
-    Scsi_Cmnd *cmd;			/* Associated Scsi_Cmnd 
-					   structure, Scsi_Cmnd points
-					   at NCR53c7x0_cmd using 
-					   host_scribble structure */
-
-    int size;				/* scsi_malloc'd size of this 
-					   structure */
-
-    int flags;				/* CMD_* flags */
-
-    unsigned char      cmnd[12];	/* CDB, copied from Scsi_Cmnd */
-    int                result;		/* Copy to Scsi_Cmnd when done */
-
-    struct {				/* Private non-cached bounce buffer */
-        unsigned char buf[256];
-	u32	      addr;
-        u32           len;
-    } bounce;
-
-/*
- * SDTR and WIDE messages are an either/or affair
- * in this message, since we will go into message out and send
- * _the whole mess_ without dropping out of message out to 
- * let the target go into message in after sending the first 
- * message.
- */
-
-    unsigned char select[11];		/* Select message, includes
-					   IDENTIFY
-					   (optional) QUEUE TAG
- 				 	   (optional) SDTR or WDTR
-					 */
-
-
-    volatile struct NCR53c7x0_cmd *next; /* Linux maintained lists (free,
-					    running, eventually finished */
-    					 
-
-    u32 *data_transfer_start;		/* Start of data transfer routines */
-    u32 *data_transfer_end;		/* Address after end of data transfer o
-    	    	    	    	    	   routines */
-/* 
- * The following three fields were moved from the DSA proper to here
- * since only dynamically generated NCR code refers to them, meaning
- * we don't need dsa_* absolutes, and it is simpler to let the 
- * host code refer to them directly.
- */
-
-/* 
- * HARD CODED : residual and saved_residual need to agree with the sizes
- * used in NCR53c7,8xx.scr.  
- * 
- * FIXME: we want to consider the case where we have odd-length 
- *	scatter/gather buffers and a WIDE transfer, in which case 
- *	we'll need to use the CHAIN MOVE instruction.  Ick.
- */
-    u32 residual[6] __attribute__ ((aligned (4)));
-					/* Residual data transfer which
-					   allows pointer code to work
-					   right.
-
-    	    	    	    	    	    [0-1] : Conditional call to 
-    	    	    	    	    	    	appropriate other transfer 
-    	    	    	    	    	    	routine.
-    	    	    	    	    	    [2-3] : Residual block transfer
-    	    	    	    	    	    	instruction.
-    	    	    	    	    	    [4-5] : Jump to instruction
-    	    	    	    	    	    	after splice.
-					 */
-    u32 saved_residual[6]; 		/* Copy of old residual, so we 
-					   can get another partial 
-					   transfer and still recover 
-    	    	    	    	    	 */
-    	    	
-    u32 saved_data_pointer;		/* Saved data pointer */
-
-    u32 dsa_next_addr;		        /* _Address_ of dsa_next field  
-					   in this dsa for RISCy 
-					   style constant. */
-
-    u32 dsa_addr;			/* Address of dsa; RISCy style
-					   constant */
-
-    u32 dsa[0];				/* Variable length (depending
-					   on host type, number of scatter /
-					   gather buffers, etc).  */
-};
-
-struct NCR53c7x0_break {
-    u32 *address, old_instruction[2];
-    struct NCR53c7x0_break *next;
-    unsigned char old_size;		/* Size of old instruction */
-};
-
-/* Indicates that the NCR is not executing code */
-#define STATE_HALTED	0		
-/* 
- * Indicates that the NCR is executing the wait for select / reselect 
- * script.  Only used when running NCR53c700 compatible scripts, only 
- * state during which an ABORT is _not_ considered an error condition.
- */
-#define STATE_WAITING	1		
-/* Indicates that the NCR is executing other code. */
-#define STATE_RUNNING	2		
-/* 
- * Indicates that the NCR was being aborted.
- */
-#define STATE_ABORTING	3
-/* Indicates that the NCR was successfully aborted. */
-#define STATE_ABORTED 4
-/* Indicates that the NCR has been disabled due to a fatal error */
-#define STATE_DISABLED 5
-
-/* 
- * Where knowledge of SCSI SCRIPT(tm) specified values are needed 
- * in an interrupt handler, an interrupt handler exists for each 
- * different SCSI script so we don't have name space problems.
- * 
- * Return values of these handlers are as follows : 
- */
-#define SPECIFIC_INT_NOTHING 	0	/* don't even restart */
-#define SPECIFIC_INT_RESTART	1	/* restart at the next instruction */
-#define SPECIFIC_INT_ABORT	2	/* recoverable error, abort cmd */
-#define SPECIFIC_INT_PANIC	3	/* unrecoverable error, panic */
-#define SPECIFIC_INT_DONE	4	/* normal command completion */
-#define SPECIFIC_INT_BREAK	5	/* break point encountered */
-
-struct NCR53c7x0_hostdata {
-    int size;				/* Size of entire Scsi_Host
-					   structure */
-    int board;				/* set to board type, useful if 
-					   we have host specific things,
-					   ie, a general purpose I/O 
-					   bit is being used to enable
-					   termination, etc. */
-
-    int chip;				/* set to chip type; 700-66 is
-					   700-66, rest are last three
-					   digits of part number */
-
-    char valid_ids[8];			/* Valid SCSI ID's for adapter */
-
-    u32 *dsp;				/* dsp to restart with after
-					   all stacked interrupts are
-					   handled. */
-
-    unsigned dsp_changed:1;		/* Has dsp changed within this
-					   set of stacked interrupts ? */
-
-    unsigned char dstat;		/* Most recent value of dstat */
-    unsigned dstat_valid:1;
-
-    unsigned expecting_iid:1;		/* Expect IID interrupt */
-    unsigned expecting_sto:1;		/* Expect STO interrupt */
-    
-    /* 
-     * The code stays cleaner if we use variables with function
-     * pointers and offsets that are unique for the different
-     * scripts rather than having a slew of switch(hostdata->chip) 
-     * statements.
-     * 
-     * It also means that the #defines from the SCSI SCRIPTS(tm)
-     * don't have to be visible outside of the script-specific
-     * instructions, preventing name space pollution.
-     */
-
-    void (* init_fixup)(struct Scsi_Host *host);
-    void (* init_save_regs)(struct Scsi_Host *host);
-    void (* dsa_fixup)(struct NCR53c7x0_cmd *cmd);
-    void (* soft_reset)(struct Scsi_Host *host);
-    int (* run_tests)(struct Scsi_Host *host);
-
-    /*
-     * Called when DSTAT_SIR is set, indicating an interrupt generated
-     * by the INT instruction, where values are unique for each SCSI
-     * script.  Should return one of the SPEC_* values.
-     */
-
-    int (* dstat_sir_intr)(struct Scsi_Host *host, struct NCR53c7x0_cmd *cmd);
-
-    int dsa_len; /* Size of DSA structure */
-
-    /*
-     * Location of DSA fields for the SCSI SCRIPT corresponding to this 
-     * chip.  
-     */
-
-    s32 dsa_start;			
-    s32 dsa_end;			
-    s32 dsa_next;
-    s32 dsa_prev;
-    s32 dsa_cmnd;
-    s32 dsa_select;
-    s32 dsa_msgout;
-    s32 dsa_cmdout;
-    s32 dsa_dataout;
-    s32 dsa_datain;
-    s32 dsa_msgin;
-    s32 dsa_msgout_other;
-    s32 dsa_write_sync;
-    s32 dsa_write_resume;
-    s32 dsa_check_reselect;
-    s32 dsa_status;
-    s32 dsa_saved_pointer;
-    s32 dsa_jump_dest;
-
-    /* 
-     * Important entry points that generic fixup code needs
-     * to know about, fixed up.
-     */
-
-    s32 E_accept_message;
-    s32 E_command_complete;		
-    s32 E_data_transfer;
-    s32 E_dsa_code_template;
-    s32 E_dsa_code_template_end;
-    s32 E_end_data_transfer;
-    s32 E_msg_in;
-    s32 E_initiator_abort;
-    s32 E_other_transfer;
-    s32 E_other_in;
-    s32 E_other_out;
-    s32 E_target_abort;
-    s32 E_debug_break;	
-    s32 E_reject_message;
-    s32 E_respond_message;
-    s32 E_select;
-    s32 E_select_msgout;
-    s32 E_test_0;
-    s32 E_test_1;
-    s32 E_test_2;
-    s32 E_test_3;
-    s32 E_dsa_zero;
-    s32 E_cmdout_cmdout;
-    s32 E_wait_reselect;
-    s32 E_dsa_code_begin;
-
-    long long options;			/* Bitfielded set of options enabled */
-    volatile u32 test_completed;	/* Test completed */
-    int test_running;			/* Test currently running */
-    s32 test_source
-	__attribute__ ((aligned (4)));
-    volatile s32 test_dest;
-
-    volatile int state;			/* state of driver, only used for 
-					   OPTION_700 */
-
-    unsigned char  dmode;		/* 
-					 * set to the address of the DMODE 
-					 * register for this chip.
-					 */
-    unsigned char istat;		/* 
-    	    	    	    	    	 * set to the address of the ISTAT 
-    	    	    	    	    	 * register for this chip.
-    	    	    	    	    	 */
-  
-    int scsi_clock;			/* 
-					 * SCSI clock in HZ. 0 may be used 
-					 * for unknown, although this will
-					 * disable synchronous negotiation.
-					 */
-
-    volatile int intrs;			/* Number of interrupts */
-    volatile int resets;		/* Number of SCSI resets */
-    unsigned char saved_dmode;	
-    unsigned char saved_ctest4;
-    unsigned char saved_ctest7;
-    unsigned char saved_dcntl;
-    unsigned char saved_scntl3;
-
-    unsigned char this_id_mask;
-
-    /* Debugger information */
-    struct NCR53c7x0_break *breakpoints, /* Linked list of all break points */
-	*breakpoint_current;		/* Current breakpoint being stepped 
-					   through, NULL if we are running 
-					   normally. */
-#ifdef NCR_DEBUG
-    int debug_size;			/* Size of debug buffer */
-    volatile int debug_count;		/* Current data count */
-    volatile char *debug_buf;		/* Output ring buffer */
-    volatile char *debug_write;		/* Current write pointer */
-    volatile char *debug_read;		/* Current read pointer */
-#endif /* def NCR_DEBUG */
-
-    /* XXX - primitive debugging junk, remove when working ? */
-    int debug_print_limit;		/* Number of commands to print
-					   out exhaustive debugging
-					   information for if 
-					   OPTION_DEBUG_DUMP is set */ 
-
-    unsigned char debug_lun_limit[16];	/* If OPTION_DEBUG_TARGET_LIMIT
-					   set, puke if commands are sent
-					   to other target/lun combinations */
-
-    int debug_count_limit;		/* Number of commands to execute
-					   before puking to limit debugging 
-					   output */
-				    
-
-    volatile unsigned idle:1;			/* set to 1 if idle */
-
-    /* 
-     * Table of synchronous+wide transfer parameters set on a per-target
-     * basis.
-     */
-    
-    volatile struct NCR53c7x0_synchronous sync[16]
-	__attribute__ ((aligned (4)));
-
-    volatile Scsi_Cmnd *issue_queue
-	__attribute__ ((aligned (4)));
-						/* waiting to be issued by
-						   Linux driver */
-    volatile struct NCR53c7x0_cmd *running_list;	
-						/* commands running, maintained
-						   by Linux driver */
-
-    volatile struct NCR53c7x0_cmd *ncrcurrent;	/* currently connected 
-						   nexus, ONLY valid for
-						   NCR53c700/NCR53c700-66
-						 */
-
-    volatile struct NCR53c7x0_cmd *spare;	/* pointer to spare,
-    	    	    	    	    	    	   allocated at probe time,
-    	    	    	    	    	    	   which we can use for 
-						   initialization */
-    volatile struct NCR53c7x0_cmd *free;
-    int max_cmd_size;				/* Maximum size of NCR53c7x0_cmd
-					    	   based on number of 
-						   scatter/gather segments, etc.
-						   */
-    volatile int num_cmds;			/* Number of commands 
-						   allocated */
-    volatile int extra_allocate;
-    volatile unsigned char cmd_allocated[16];	/* Have we allocated commands
-						   for this target yet?  If not,
-						   do so ASAP */
-    volatile unsigned char busy[16][8];     	/* number of commands 
-						   executing on each target
-    	    	    	    	    	    	 */
-    /* 
-     * Eventually, I'll switch to a coroutine for calling 
-     * cmd->done(cmd), etc. so that we can overlap interrupt
-     * processing with this code for maximum performance.
-     */
-    
-    volatile struct NCR53c7x0_cmd *finished_queue;	
-						
-    /* Shared variables between SCRIPT and host driver */
-    volatile u32 *schedule
-	__attribute__ ((aligned (4)));		/* Array of JUMPs to dsa_begin
-						   routines of various DSAs.  
-						   When not in use, replace
-						   with jump to next slot */
-
-
-    volatile unsigned char msg_buf[16];		/* buffer for messages
-						   other than the command
-						   complete message */
-
-    /* Per-target default synchronous and WIDE messages */
-    volatile unsigned char synchronous_want[16][5];
-    volatile unsigned char wide_want[16][4];
-
-    /* Bit fielded set of targets we want to speak synchronously with */ 
-    volatile u16 initiate_sdtr;	
-    /* Bit fielded set of targets we want to speak wide with */
-    volatile u16 initiate_wdtr;
-    /* Bit fielded list of targets we've talked to. */
-    volatile u16 talked_to;
-
-    /* Array of bit-fielded lun lists that we need to request_sense */
-    volatile unsigned char request_sense[16];
-
-    u32 addr_reconnect_dsa_head
-	__attribute__ ((aligned (4)));		/* RISCy style constant,
-						   address of following */
-    volatile u32 reconnect_dsa_head;	
-    /* Data identifying nexus we are trying to match during reselection */
-    volatile unsigned char reselected_identify; /* IDENTIFY message */
-    volatile unsigned char reselected_tag;	/* second byte of queue tag 
-						   message or 0 */
-
-    /* These were static variables before we moved them */
-
-    s32 NCR53c7xx_zero
-	__attribute__ ((aligned (4)));
-    s32 NCR53c7xx_sink;
-    u32 NOP_insn;
-    char NCR53c7xx_msg_reject;
-    char NCR53c7xx_msg_abort;
-    char NCR53c7xx_msg_nop;
-
-    /*
-     * Following item introduced by RGH to support NCRc710, which is
-     * VERY brain-dead when it come to memory moves
-     */
-
-			  /* DSA save area used only by the NCR chip */
-    volatile unsigned long saved2_dsa
-	__attribute__ ((aligned (4)));
-
-    volatile unsigned long emulated_intfly
-	__attribute__ ((aligned (4)));
-
-    volatile int event_size, event_index;
-    volatile struct NCR53c7x0_event *events;
-
-    /* If we need to generate code to kill off the currently connected 
-       command, this is where we do it. Should have a BMI instruction
-       to source or sink the current data, followed by a JUMP
-       to abort_connected */
-
-    u32 *abort_script;
-
-    int script_count;				/* Size of script in words */
-    u32 script[0];				/* Relocated SCSI script */
-
-};
-
-#define SCSI_IRQ_NONE	255
-#define DMA_NONE	255
-#define IRQ_AUTO	254
-#define DMA_AUTO	254
-
-#define BOARD_GENERIC	0
-
-#define NCR53c7x0_insn_size(insn)					\
-    (((insn) & DCMD_TYPE_MASK) == DCMD_TYPE_MMI ? 3 : 2)
-    
-
-#define NCR53c7x0_local_declare()					\
-    volatile unsigned char *NCR53c7x0_address_memory;			\
-    unsigned int NCR53c7x0_address_io;					\
-    int NCR53c7x0_memory_mapped
-
-#define NCR53c7x0_local_setup(host)					\
-    NCR53c7x0_address_memory = (void *) (host)->base;			\
-    NCR53c7x0_address_io = (unsigned int) (host)->io_port;		\
-    NCR53c7x0_memory_mapped = ((struct NCR53c7x0_hostdata *) 		\
-	host->hostdata[0])-> options & OPTION_MEMORY_MAPPED 
-
-#ifdef BIG_ENDIAN
-/* These could be more efficient, given that we are always memory mapped,
- * but they don't give the same problems as the write macros, so leave
- * them. */
-#ifdef __mc68000__
-#define NCR53c7x0_read8(address) 					\
-    ((unsigned int)raw_inb((u32)NCR53c7x0_address_memory + ((u32)(address)^3)) )
-
-#define NCR53c7x0_read16(address) 					\
-    ((unsigned int)raw_inw((u32)NCR53c7x0_address_memory + ((u32)(address)^2)))
-#else
-#define NCR53c7x0_read8(address) 					\
-    (NCR53c7x0_memory_mapped ? 						\
-	(unsigned int)readb((u32)NCR53c7x0_address_memory + ((u32)(address)^3)) :	\
-	inb(NCR53c7x0_address_io + (address)))
-
-#define NCR53c7x0_read16(address) 					\
-    (NCR53c7x0_memory_mapped ? 						\
-	(unsigned int)readw((u32)NCR53c7x0_address_memory + ((u32)(address)^2)) :	\
-	inw(NCR53c7x0_address_io + (address)))
-#endif /* mc68000 */
-#else
-#define NCR53c7x0_read8(address) 					\
-    (NCR53c7x0_memory_mapped ? 						\
-	(unsigned int)readb((u32)NCR53c7x0_address_memory + (u32)(address)) :	\
-	inb(NCR53c7x0_address_io + (address)))
-
-#define NCR53c7x0_read16(address) 					\
-    (NCR53c7x0_memory_mapped ? 						\
-	(unsigned int)readw((u32)NCR53c7x0_address_memory + (u32)(address)) :	\
-	inw(NCR53c7x0_address_io + (address)))
-#endif
-
-#ifdef __mc68000__
-#define NCR53c7x0_read32(address) 					\
-    ((unsigned int) raw_inl((u32)NCR53c7x0_address_memory + (u32)(address)))
-#else
-#define NCR53c7x0_read32(address) 					\
-    (NCR53c7x0_memory_mapped ? 						\
-	(unsigned int) readl((u32)NCR53c7x0_address_memory + (u32)(address)) : 	\
-	inl(NCR53c7x0_address_io + (address)))
-#endif /* mc68000*/
-
-#ifdef BIG_ENDIAN
-/* If we are big-endian, then we are not Intel, so probably don't have
- * an i/o map as well as a memory map.  So, let's assume memory mapped.
- * Also, I am having terrible problems trying to persuade the compiler
- * not to lay down code which does a read after write for these macros.
- * If you remove 'volatile' from writeb() and friends it is ok....
- */
-
-#define NCR53c7x0_write8(address,value) 				\
-	*(volatile unsigned char *)					\
-		((u32)NCR53c7x0_address_memory + ((u32)(address)^3)) = (value)
-
-#define NCR53c7x0_write16(address,value) 				\
-	*(volatile unsigned short *)					\
-		((u32)NCR53c7x0_address_memory + ((u32)(address)^2)) = (value)
-
-#define NCR53c7x0_write32(address,value) 				\
-	*(volatile unsigned long *)					\
-		((u32)NCR53c7x0_address_memory + ((u32)(address))) = (value)
-
-#else
-
-#define NCR53c7x0_write8(address,value) 				\
-    (NCR53c7x0_memory_mapped ? 						\
-     ({writeb((value), (u32)NCR53c7x0_address_memory + (u32)(address)); mb();}) :	\
-	outb((value), NCR53c7x0_address_io + (address)))
-
-#define NCR53c7x0_write16(address,value) 				\
-    (NCR53c7x0_memory_mapped ? 						\
-     ({writew((value), (u32)NCR53c7x0_address_memory + (u32)(address)); mb();}) :	\
-	outw((value), NCR53c7x0_address_io + (address)))
-
-#define NCR53c7x0_write32(address,value) 				\
-    (NCR53c7x0_memory_mapped ? 						\
-     ({writel((value), (u32)NCR53c7x0_address_memory + (u32)(address)); mb();}) :	\
-	outl((value), NCR53c7x0_address_io + (address)))
-
-#endif
-
-/* Patch arbitrary 32 bit words in the script */
-#define patch_abs_32(script, offset, symbol, value)			\
-    	for (i = 0; i < (sizeof (A_##symbol##_used) / sizeof 		\
-    	    (u32)); ++i) {					\
-	    (script)[A_##symbol##_used[i] - (offset)] += (value);	\
-	    if (hostdata->options & OPTION_DEBUG_FIXUP) 		\
-	      printk("scsi%d : %s reference %d at 0x%x in %s is now 0x%x\n",\
-		host->host_no, #symbol, i, A_##symbol##_used[i] - 	\
-		(int)(offset), #script, (script)[A_##symbol##_used[i] -	\
-		(offset)]);						\
-    	}
-
-/* Patch read/write instruction immediate field */
-#define patch_abs_rwri_data(script, offset, symbol, value)		\
-    	for (i = 0; i < (sizeof (A_##symbol##_used) / sizeof 		\
-    	    (u32)); ++i)					\
-    	    (script)[A_##symbol##_used[i] - (offset)] =			\
-	    	((script)[A_##symbol##_used[i] - (offset)] & 		\
-	    	~DBC_RWRI_IMMEDIATE_MASK) | 				\
-    	    	(((value) << DBC_RWRI_IMMEDIATE_SHIFT) &		\
-		 DBC_RWRI_IMMEDIATE_MASK)
-
-/* Patch transfer control instruction data field */
-#define patch_abs_tci_data(script, offset, symbol, value)	        \
-    	for (i = 0; i < (sizeof (A_##symbol##_used) / sizeof 		\
-    	    (u32)); ++i)					\
-    	    (script)[A_##symbol##_used[i] - (offset)] =			\
-	    	((script)[A_##symbol##_used[i] - (offset)] & 		\
-	    	~DBC_TCI_DATA_MASK) | 					\
-    	    	(((value) << DBC_TCI_DATA_SHIFT) &			\
-		 DBC_TCI_DATA_MASK)
-
-/* Patch field in dsa structure (assignment should be +=?) */
-#define patch_dsa_32(dsa, symbol, word, value)				\
-	{								\
-	(dsa)[(hostdata->##symbol - hostdata->dsa_start) / sizeof(u32)	\
-	    + (word)] = (value);					\
-	if (hostdata->options & OPTION_DEBUG_DSA)			\
-	    printk("scsi : dsa %s symbol %s(%d) word %d now 0x%x\n",	\
-		#dsa, #symbol, hostdata->##symbol, 			\
-		(word), (u32) (value));					\
-	}
-
-/* Paranoid people could use panic() here. */
-#define FATAL(host) shutdown((host));
-
-extern int ncr53c7xx_init(struct scsi_host_template *tpnt, int board, int chip,
-			  unsigned long base, int io_port, int irq, int dma,
-			  long long options, int clock);
-
-#endif /* NCR53c710_C */
-#endif /* NCR53c710_H */
diff --git a/drivers/scsi/53c7xx.scr b/drivers/scsi/53c7xx.scr
deleted file mode 100644
index 9c5694a2da8..00000000000
--- a/drivers/scsi/53c7xx.scr
+++ /dev/null
@@ -1,1591 +0,0 @@
-#undef DEBUG
-#undef EVENTS
-#undef NO_SELECTION_TIMEOUT
-#define BIG_ENDIAN
-
-; 53c710 driver.  Modified from Drew Eckhardts driver
-; for 53c810 by Richard Hirst [richard@sleepie.demon.co.uk]
-;
-; I have left the script for the 53c8xx family in here, as it is likely
-; to be useful to see what I changed when bug hunting.
-
-; NCR 53c810 driver, main script
-; Sponsored by 
-;	iX Multiuser Multitasking Magazine
-;	hm@ix.de
-;
-; Copyright 1993, 1994, 1995 Drew Eckhardt
-;      Visionary Computing 
-;      (Unix and Linux consulting and custom programming)
-;      drew@PoohSticks.ORG
-;      +1 (303) 786-7975
-;
-; TolerANT and SCSI SCRIPTS are registered trademarks of NCR Corporation.
-;
-; PRE-ALPHA
-;
-; For more information, please consult 
-;
-; NCR 53C810
-; PCI-SCSI I/O Processor
-; Data Manual
-;
-; NCR 53C710 
-; SCSI I/O Processor
-; Programmers Guide
-;
-; NCR Microelectronics
-; 1635 Aeroplaza Drive
-; Colorado Springs, CO 80916
-; 1+ (719) 578-3400
-;
-; Toll free literature number
-; +1 (800) 334-5454
-;
-; IMPORTANT : This code is self modifying due to the limitations of 
-;	the NCR53c7,8xx series chips.  Persons debugging this code with
-;	the remote debugger should take this into account, and NOT set
-;	breakpoints in modified instructions.
-;
-; Design:
-; The NCR53c7,8xx family of SCSI chips are busmasters with an onboard 
-; microcontroller using a simple instruction set.   
-;
-; So, to minimize the effects of interrupt latency, and to maximize 
-; throughput, this driver offloads the practical maximum amount 
-; of processing to the SCSI chip while still maintaining a common
-; structure.
-;
-; Where tradeoffs were needed between efficiency on the older
-; chips and the newer NCR53c800 series, the NCR53c800 series 
-; was chosen.
-;
-; While the NCR53c700 and NCR53c700-66 lacked the facilities to fully
-; automate SCSI transfers without host processor intervention, this 
-; isn't the case with the NCR53c710 and newer chips which allow 
-;
-; - reads and writes to the internal registers from within the SCSI
-; 	scripts, allowing the SCSI SCRIPTS(tm) code to save processor
-; 	state so that multiple threads of execution are possible, and also
-; 	provide an ALU for loop control, etc.
-; 
-; - table indirect addressing for some instructions. This allows 
-;	pointers to be located relative to the DSA ((Data Structure
-;	Address) register.
-;
-; These features make it possible to implement a mailbox style interface,
-; where the same piece of code is run to handle I/O for multiple threads
-; at once minimizing our need to relocate code.  Since the NCR53c700/
-; NCR53c800 series have a unique combination of features, making a 
-; a standard ingoing/outgoing mailbox system, costly, I've modified it.
-;
-; - Mailboxes are a mixture of code and data.  This lets us greatly
-; 	simplify the NCR53c810 code and do things that would otherwise
-;	not be possible.
-;
-; The saved data pointer is now implemented as follows :
-;
-; 	Control flow has been architected such that if control reaches
-;	munge_save_data_pointer, on a restore pointers message or 
-;	reconnection, a jump to the address formerly in the TEMP register
-;	will allow the SCSI command to resume execution.
-;
-
-;
-; Note : the DSA structures must be aligned on 32 bit boundaries,
-; since the source and destination of MOVE MEMORY instructions 
-; must share the same alignment and this is the alignment of the
-; NCR registers.
-;
-
-; For some systems (MVME166, for example) dmode is always the same, so don't
-; waste time writing it
-
-#if 1
-#define DMODE_MEMORY_TO_NCR
-#define DMODE_MEMORY_TO_MEMORY
-#define DMODE_NCR_TO_MEMORY
-#else
-#define DMODE_MEMORY_TO_NCR    MOVE dmode_memory_to_ncr TO DMODE
-#define DMODE_MEMORY_TO_MEMORY MOVE dmode_memory_to_memory TO DMODE
-#define DMODE_NCR_TO_MEMORY    MOVE dmode_ncr_to_memory TO DMODE
-#endif
-
-ABSOLUTE dsa_temp_lun = 0		; Patch to lun for current dsa
-ABSOLUTE dsa_temp_next = 0		; Patch to dsa next for current dsa
-ABSOLUTE dsa_temp_addr_next = 0		; Patch to address of dsa next address 
-					; 	for current dsa
-ABSOLUTE dsa_temp_sync = 0		; Patch to address of per-target
-					;	sync routine
-ABSOLUTE dsa_sscf_710 = 0		; Patch to address of per-target
-					;	sscf value (53c710)
-ABSOLUTE dsa_temp_target = 0		; Patch to id for current dsa
-ABSOLUTE dsa_temp_addr_saved_pointer = 0; Patch to address of per-command
-					; 	saved data pointer
-ABSOLUTE dsa_temp_addr_residual = 0	; Patch to address of per-command
-					;	current residual code
-ABSOLUTE dsa_temp_addr_saved_residual = 0; Patch to address of per-command
-					; saved residual code
-ABSOLUTE dsa_temp_addr_new_value = 0	; Address of value for JUMP operand
-ABSOLUTE dsa_temp_addr_array_value = 0 	; Address to copy to
-ABSOLUTE dsa_temp_addr_dsa_value = 0	; Address of this DSA value
-
-;
-; Once a device has initiated reselection, we need to compare it 
-; against the singly linked list of commands which have disconnected
-; and are pending reselection.  These commands are maintained in 
-; an unordered singly linked list of DSA structures, through the
-; DSA pointers at their 'centers' headed by the reconnect_dsa_head
-; pointer.
-; 
-; To avoid complications in removing commands from the list,
-; I minimize the amount of expensive (at eight operations per
-; addition @ 500-600ns each) pointer operations which must
-; be done in the NCR driver by precomputing them on the 
-; host processor during dsa structure generation.
-;
-; The fixed-up per DSA code knows how to recognize the nexus
-; associated with the corresponding SCSI command, and modifies
-; the source and destination pointers for the MOVE MEMORY 
-; instruction which is executed when reselected_ok is called
-; to remove the command from the list.  Similarly, DSA is 
-; loaded with the address of the next DSA structure and
-; reselected_check_next is called if a failure occurs.
-;
-; Perhaps more concisely, the net effect of the mess is 
-;
-; for (dsa = reconnect_dsa_head, dest = &reconnect_dsa_head, 
-;     src = NULL; dsa; dest = &dsa->next, dsa = dsa->next) {
-; 	src = &dsa->next;
-; 	if (target_id == dsa->id && target_lun == dsa->lun) {
-; 		*dest = *src;
-; 		break;
-;         }	
-; }
-;
-; if (!dsa)
-;           error (int_err_unexpected_reselect);
-; else  
-;     longjmp (dsa->jump_resume, 0);
-;
-; 	
-
-#if (CHIP != 700) && (CHIP != 70066)
-; Define DSA structure used for mailboxes
-ENTRY dsa_code_template
-dsa_code_template:
-ENTRY dsa_code_begin
-dsa_code_begin:
-; RGH: Don't care about TEMP and DSA here
-	DMODE_MEMORY_TO_NCR
-	MOVE MEMORY 4, dsa_temp_addr_dsa_value, addr_scratch
-	DMODE_MEMORY_TO_MEMORY
-#if (CHIP == 710)
-	MOVE MEMORY 4, addr_scratch, saved_dsa
-	; We are about to go and select the device, so must set SSCF bits
-	MOVE MEMORY 4, dsa_sscf_710, addr_scratch
-#ifdef BIG_ENDIAN
-	MOVE SCRATCH3 TO SFBR
-#else
-	MOVE SCRATCH0 TO SFBR
-#endif
-	MOVE SFBR TO SBCL
-	MOVE MEMORY 4, saved_dsa, addr_dsa
-#else
-	CALL scratch_to_dsa
-#endif
-	CALL select
-; Handle the phase mismatch which may have resulted from the 
-; MOVE FROM dsa_msgout if we returned here.  The CLEAR ATN 
-; may or may not be necessary, and we should update script_asm.pl
-; to handle multiple pieces.
-    CLEAR ATN
-    CLEAR ACK
-
-; Replace second operand with address of JUMP instruction dest operand
-; in schedule table for this DSA.  Becomes dsa_jump_dest in 53c7,8xx.c.
-ENTRY dsa_code_fix_jump
-dsa_code_fix_jump:
-	MOVE MEMORY 4, NOP_insn, 0
-	JUMP select_done
-
-; wrong_dsa loads the DSA register with the value of the dsa_next
-; field.
-;
-wrong_dsa:
-#if (CHIP == 710)
-;                NOTE DSA is corrupt when we arrive here!
-#endif
-;		Patch the MOVE MEMORY INSTRUCTION such that 
-;		the destination address is the address of the OLD 
-;		next pointer.
-;
-	MOVE MEMORY 4, dsa_temp_addr_next, reselected_ok_patch + 8
-	DMODE_MEMORY_TO_NCR
-;
-; 	Move the _contents_ of the next pointer into the DSA register as 
-;	the next I_T_L or I_T_L_Q tupple to check against the established
-;	nexus.
-;
-	MOVE MEMORY 4, dsa_temp_next, addr_scratch
-	DMODE_MEMORY_TO_MEMORY
-#if (CHIP == 710)
-	MOVE MEMORY 4, addr_scratch, saved_dsa
-	MOVE MEMORY 4, saved_dsa, addr_dsa
-#else
-	CALL scratch_to_dsa
-#endif
-	JUMP reselected_check_next
-
-ABSOLUTE dsa_save_data_pointer = 0
-ENTRY dsa_code_save_data_pointer
-dsa_code_save_data_pointer:
-#if (CHIP == 710)
-	; When we get here, TEMP has been saved in jump_temp+4, DSA is corrupt
-	; We MUST return with DSA correct
-    	MOVE MEMORY 4, jump_temp+4, dsa_temp_addr_saved_pointer
-; HARD CODED : 24 bytes needs to agree with 53c7,8xx.h
-    	MOVE MEMORY 24, dsa_temp_addr_residual, dsa_temp_addr_saved_residual
-        CLEAR ACK
-#ifdef DEBUG
-        INT int_debug_saved
-#endif
-	MOVE MEMORY 4, saved_dsa, addr_dsa
-	JUMP jump_temp
-#else
-    	DMODE_NCR_TO_MEMORY
-    	MOVE MEMORY 4, addr_temp, dsa_temp_addr_saved_pointer
-    	DMODE_MEMORY_TO_MEMORY
-; HARD CODED : 24 bytes needs to agree with 53c7,8xx.h
-    	MOVE MEMORY 24, dsa_temp_addr_residual, dsa_temp_addr_saved_residual
-        CLEAR ACK
-#ifdef DEBUG
-        INT int_debug_saved
-#endif
-    	RETURN
-#endif
-ABSOLUTE dsa_restore_pointers = 0
-ENTRY dsa_code_restore_pointers
-dsa_code_restore_pointers:
-#if (CHIP == 710)
-	; TEMP and DSA are corrupt when we get here, but who cares!
-    	MOVE MEMORY 4, dsa_temp_addr_saved_pointer, jump_temp + 4
-; HARD CODED : 24 bytes needs to agree with 53c7,8xx.h
-    	MOVE MEMORY 24, dsa_temp_addr_saved_residual, dsa_temp_addr_residual
-        CLEAR ACK
-	; Restore DSA, note we don't care about TEMP
-	MOVE MEMORY 4, saved_dsa, addr_dsa
-#ifdef DEBUG
-        INT int_debug_restored
-#endif
-	JUMP jump_temp
-#else
-    	DMODE_MEMORY_TO_NCR
-    	MOVE MEMORY 4, dsa_temp_addr_saved_pointer, addr_temp
-    	DMODE_MEMORY_TO_MEMORY
-; HARD CODED : 24 bytes needs to agree with 53c7,8xx.h
-    	MOVE MEMORY 24, dsa_temp_addr_saved_residual, dsa_temp_addr_residual
-        CLEAR ACK
-#ifdef DEBUG
-        INT int_debug_restored
-#endif
-    	RETURN
-#endif
-
-ABSOLUTE dsa_check_reselect = 0
-; dsa_check_reselect determines whether or not the current target and
-; lun match the current DSA
-ENTRY dsa_code_check_reselect
-dsa_code_check_reselect:
-#if (CHIP == 710)
-	/* Arrives here with DSA correct */
-	/* Assumes we are always ID 7 */
-	MOVE LCRC TO SFBR		; LCRC has our ID and his ID bits set
-	JUMP REL (wrong_dsa), IF NOT dsa_temp_target, AND MASK 0x80
-#else
-	MOVE SSID TO SFBR		; SSID contains 3 bit target ID
-; FIXME : we need to accommodate bit fielded and binary here for '7xx/'8xx chips
-	JUMP REL (wrong_dsa), IF NOT dsa_temp_target, AND MASK 0xf8
-#endif
-;
-; Hack - move to scratch first, since SFBR is not writeable
-; 	via the CPU and hence a MOVE MEMORY instruction.
-;
-	DMODE_MEMORY_TO_NCR
-	MOVE MEMORY 1, reselected_identify, addr_scratch
-	DMODE_MEMORY_TO_MEMORY
-#ifdef BIG_ENDIAN
-	; BIG ENDIAN ON MVME16x
-	MOVE SCRATCH3 TO SFBR
-#else
-	MOVE SCRATCH0 TO SFBR
-#endif
-; FIXME : we need to accommodate bit fielded and binary here for '7xx/'8xx chips
-; Are you sure about that?  richard@sleepie.demon.co.uk
-	JUMP REL (wrong_dsa), IF NOT dsa_temp_lun, AND MASK 0xf8
-;		Patch the MOVE MEMORY INSTRUCTION such that
-;		the source address is the address of this dsa's
-;		next pointer.
-	MOVE MEMORY 4, dsa_temp_addr_next, reselected_ok_patch + 4
-	CALL reselected_ok
-#if (CHIP == 710)
-;	Restore DSA following memory moves in reselected_ok
-;	dsa_temp_sync doesn't really care about DSA, but it has an
-;	optional debug INT so a valid DSA is a good idea.
-	MOVE MEMORY 4, saved_dsa, addr_dsa
-#endif
-	CALL dsa_temp_sync	
-; Release ACK on the IDENTIFY message _after_ we've set the synchronous 
-; transfer parameters! 
-	CLEAR ACK
-; Implicitly restore pointers on reselection, so a RETURN
-; will transfer control back to the right spot.
-    	CALL REL (dsa_code_restore_pointers)
-    	RETURN
-ENTRY dsa_zero
-dsa_zero:
-ENTRY dsa_code_template_end
-dsa_code_template_end:
-
-; Perform sanity check for dsa_fields_start == dsa_code_template_end - 
-; dsa_zero, puke.
-
-ABSOLUTE dsa_fields_start =  0	; Sanity marker
-				; 	pad 48 bytes (fix this RSN)
-ABSOLUTE dsa_next = 48		; len 4 Next DSA
- 				; del 4 Previous DSA address
-ABSOLUTE dsa_cmnd = 56		; len 4 Scsi_Cmnd * for this thread.
-ABSOLUTE dsa_select = 60	; len 4 Device ID, Period, Offset for 
-			 	;	table indirect select
-ABSOLUTE dsa_msgout = 64	; len 8 table indirect move parameter for 
-				;       select message
-ABSOLUTE dsa_cmdout = 72	; len 8 table indirect move parameter for 
-				;	command
-ABSOLUTE dsa_dataout = 80	; len 4 code pointer for dataout
-ABSOLUTE dsa_datain = 84	; len 4 code pointer for datain
-ABSOLUTE dsa_msgin = 88		; len 8 table indirect move for msgin
-ABSOLUTE dsa_status = 96 	; len 8 table indirect move for status byte
-ABSOLUTE dsa_msgout_other = 104	; len 8 table indirect for normal message out
-				; (Synchronous transfer negotiation, etc).
-ABSOLUTE dsa_end = 112
-
-ABSOLUTE schedule = 0 		; Array of JUMP dsa_begin or JUMP (next),
-				; terminated by a call to JUMP wait_reselect
-
-; Linked lists of DSA structures
-ABSOLUTE reconnect_dsa_head = 0	; Link list of DSAs which can reconnect
-ABSOLUTE addr_reconnect_dsa_head = 0 ; Address of variable containing
-				; address of reconnect_dsa_head
-
-; These select the source and destination of a MOVE MEMORY instruction
-ABSOLUTE dmode_memory_to_memory = 0x0
-ABSOLUTE dmode_memory_to_ncr = 0x0
-ABSOLUTE dmode_ncr_to_memory = 0x0
-
-ABSOLUTE addr_scratch = 0x0
-ABSOLUTE addr_temp = 0x0
-#if (CHIP == 710)
-ABSOLUTE saved_dsa = 0x0
-ABSOLUTE emulfly = 0x0
-ABSOLUTE addr_dsa = 0x0
-#endif
-#endif /* CHIP != 700 && CHIP != 70066 */
-
-; Interrupts - 
-; MSB indicates type
-; 0	handle error condition
-; 1 	handle message 
-; 2 	handle normal condition
-; 3	debugging interrupt
-; 4 	testing interrupt 
-; Next byte indicates specific error
-
-; XXX not yet implemented, I'm not sure if I want to - 
-; Next byte indicates the routine the error occurred in
-; The LSB indicates the specific place the error occurred
- 
-ABSOLUTE int_err_unexpected_phase = 0x00000000	; Unexpected phase encountered
-ABSOLUTE int_err_selected = 0x00010000		; SELECTED (nee RESELECTED)
-ABSOLUTE int_err_unexpected_reselect = 0x00020000 
-ABSOLUTE int_err_check_condition = 0x00030000	
-ABSOLUTE int_err_no_phase = 0x00040000
-ABSOLUTE int_msg_wdtr = 0x01000000		; WDTR message received
-ABSOLUTE int_msg_sdtr = 0x01010000		; SDTR received
-ABSOLUTE int_msg_1 = 0x01020000			; single byte special message
-						; received
-
-ABSOLUTE int_norm_select_complete = 0x02000000	; Select complete, reprogram
-						; registers.
-ABSOLUTE int_norm_reselect_complete = 0x02010000	; Nexus established
-ABSOLUTE int_norm_command_complete = 0x02020000 ; Command complete
-ABSOLUTE int_norm_disconnected = 0x02030000	; Disconnected 
-ABSOLUTE int_norm_aborted =0x02040000		; Aborted *dsa
-ABSOLUTE int_norm_reset = 0x02050000		; Generated BUS reset.
-ABSOLUTE int_norm_emulateintfly = 0x02060000	; 53C710 Emulated intfly
-ABSOLUTE int_debug_break = 0x03000000		; Break point
-#ifdef DEBUG
-ABSOLUTE int_debug_scheduled = 0x03010000	; new I/O scheduled 
-ABSOLUTE int_debug_idle = 0x03020000		; scheduler is idle
-ABSOLUTE int_debug_dsa_loaded = 0x03030000	; dsa reloaded
-ABSOLUTE int_debug_reselected = 0x03040000	; NCR reselected
-ABSOLUTE int_debug_head = 0x03050000		; issue head overwritten
-ABSOLUTE int_debug_disconnected = 0x03060000	; disconnected
-ABSOLUTE int_debug_disconnect_msg = 0x03070000	; got message to disconnect
-ABSOLUTE int_debug_dsa_schedule = 0x03080000	; in dsa_schedule
-ABSOLUTE int_debug_reselect_check = 0x03090000  ; Check for reselection of DSA
-ABSOLUTE int_debug_reselected_ok = 0x030a0000 	; Reselection accepted
-#endif
-ABSOLUTE int_debug_panic = 0x030b0000		; Panic driver
-#ifdef DEBUG
-ABSOLUTE int_debug_saved = 0x030c0000 		; save/restore pointers
-ABSOLUTE int_debug_restored = 0x030d0000
-ABSOLUTE int_debug_sync = 0x030e0000		; Sanity check synchronous 
-						; parameters. 
-ABSOLUTE int_debug_datain = 0x030f0000		; going into data in phase 
-						; now.
-ABSOLUTE int_debug_check_dsa = 0x03100000	; Sanity check DSA against
-						; SDID.
-#endif
-
-ABSOLUTE int_test_1 = 0x04000000		; Test 1 complete
-ABSOLUTE int_test_2 = 0x04010000		; Test 2 complete
-ABSOLUTE int_test_3 = 0x04020000		; Test 3 complete
-
-
-; These should start with 0x05000000, with low bits incrementing for 
-; each one.
-
-#ifdef EVENTS
-ABSOLUTE int_EVENT_SELECT = 0
-ABSOLUTE int_EVENT_DISCONNECT = 0
-ABSOLUTE int_EVENT_RESELECT = 0
-ABSOLUTE int_EVENT_COMPLETE = 0
-ABSOLUTE int_EVENT_IDLE = 0
-ABSOLUTE int_EVENT_SELECT_FAILED = 0
-ABSOLUTE int_EVENT_BEFORE_SELECT = 0
-ABSOLUTE int_EVENT_RESELECT_FAILED = 0
-#endif
-						
-ABSOLUTE NCR53c7xx_msg_abort = 0	; Pointer to abort message
-ABSOLUTE NCR53c7xx_msg_reject = 0       ; Pointer to reject message
-ABSOLUTE NCR53c7xx_zero	= 0		; long with zero in it, use for source
-ABSOLUTE NCR53c7xx_sink = 0		; long to dump worthless data in
-ABSOLUTE NOP_insn = 0			; NOP instruction
-
-; Pointer to message, potentially multi-byte
-ABSOLUTE msg_buf = 0
-
-; Pointer to holding area for reselection information
-ABSOLUTE reselected_identify = 0
-ABSOLUTE reselected_tag = 0
-
-; Request sense command pointer, it's a 6 byte command, should
-; be constant for all commands since we always want 16 bytes of 
-; sense and we don't need to change any fields as we did under 
-; SCSI-I when we actually cared about the LUN field.
-;EXTERNAL NCR53c7xx_sense		; Request sense command
-
-#if (CHIP != 700) && (CHIP != 70066)
-; dsa_schedule  
-; PURPOSE : after a DISCONNECT message has been received, and pointers
-;	saved, insert the current DSA structure at the head of the 
-; 	disconnected queue and fall through to the scheduler.
-;
-; CALLS : OK
-;
-; INPUTS : dsa - current DSA structure, reconnect_dsa_head - list
-;	of disconnected commands
-;
-; MODIFIES : SCRATCH, reconnect_dsa_head
-; 
-; EXITS : always passes control to schedule
-
-ENTRY dsa_schedule
-dsa_schedule:
-#ifdef DEBUG
-    INT int_debug_dsa_schedule
-#endif
-
-;
-; Calculate the address of the next pointer within the DSA 
-; structure of the command that is currently disconnecting
-;
-#if (CHIP == 710)
-    ; Read what should be the current DSA from memory - actual DSA
-    ; register is probably corrupt
-    MOVE MEMORY 4, saved_dsa, addr_scratch
-#else
-    CALL dsa_to_scratch
-#endif
-    MOVE SCRATCH0 + dsa_next TO SCRATCH0
-    MOVE SCRATCH1 + 0 TO SCRATCH1 WITH CARRY
-    MOVE SCRATCH2 + 0 TO SCRATCH2 WITH CARRY
-    MOVE SCRATCH3 + 0 TO SCRATCH3 WITH CARRY
-
-; Point the next field of this DSA structure at the current disconnected 
-; list
-    DMODE_NCR_TO_MEMORY
-    MOVE MEMORY 4, addr_scratch, dsa_schedule_insert + 8
-    DMODE_MEMORY_TO_MEMORY
-dsa_schedule_insert:
-    MOVE MEMORY 4, reconnect_dsa_head, 0 
-
-; And update the head pointer.
-#if (CHIP == 710)
-    ; Read what should be the current DSA from memory - actual DSA
-    ; register is probably corrupt
-    MOVE MEMORY 4, saved_dsa, addr_scratch
-#else
-    CALL dsa_to_scratch
-#endif
-    DMODE_NCR_TO_MEMORY
-    MOVE MEMORY 4, addr_scratch, reconnect_dsa_head
-    DMODE_MEMORY_TO_MEMORY
-/* Temporarily, see what happens. */
-#ifndef ORIGINAL
-#if (CHIP != 710)
-    MOVE SCNTL2 & 0x7f TO SCNTL2
-#endif
-    CLEAR ACK
-#endif
-#if (CHIP == 710)
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-#endif
-    WAIT DISCONNECT
-#ifdef EVENTS
-    INT int_EVENT_DISCONNECT;
-#endif
-#ifdef DEBUG
-    INT int_debug_disconnected
-#endif
-    JUMP schedule
-#endif 
-
-;
-; select
-;
-; PURPOSE : establish a nexus for the SCSI command referenced by DSA.
-;	On success, the current DSA structure is removed from the issue 
-;	queue.  Usually, this is entered as a fall-through from schedule,
-;	although the contingent allegiance handling code will write
-;	the select entry address to the DSP to restart a command as a 
-;	REQUEST SENSE.  A message is sent (usually IDENTIFY, although
-;	additional SDTR or WDTR messages may be sent).  COMMAND OUT
-;	is handled.
-;
-; INPUTS : DSA - SCSI command, issue_dsa_head
-;
-; CALLS : NOT OK
-;
-; MODIFIES : SCRATCH, issue_dsa_head
-;
-; EXITS : on reselection or selection, go to select_failed
-;	otherwise, RETURN so control is passed back to 
-;	dsa_begin.
-;
-
-ENTRY select
-select:
-
-#ifdef EVENTS
-    INT int_EVENT_BEFORE_SELECT
-#endif
-
-#ifdef DEBUG
-    INT int_debug_scheduled
-#endif
-    CLEAR TARGET
-
-; XXX
-;
-; In effect, SELECTION operations are backgrounded, with execution
-; continuing until code which waits for REQ or a fatal interrupt is 
-; encountered.
-;
-; So, for more performance, we could overlap the code which removes 
-; the command from the NCRs issue queue with the selection, but 
-; at this point I don't want to deal with the error recovery.
-;
-
-#if (CHIP != 700) && (CHIP != 70066)
-#if (CHIP == 710)
-    ; Enable selection timer
-#ifdef NO_SELECTION_TIMEOUT
-    MOVE CTEST7 & 0xff TO CTEST7
-#else
-    MOVE CTEST7 & 0xef TO CTEST7
-#endif
-#endif
-    SELECT ATN FROM dsa_select, select_failed
-    JUMP select_msgout, WHEN MSG_OUT
-ENTRY select_msgout
-select_msgout:
-#if (CHIP == 710)
-    ; Disable selection timer
-    MOVE CTEST7 | 0x10 TO CTEST7
-#endif
-    MOVE FROM dsa_msgout, WHEN MSG_OUT
-#else
-ENTRY select_msgout
-    SELECT ATN 0, select_failed
-select_msgout:
-    MOVE 0, 0, WHEN MSGOUT
-#endif
-
-#ifdef EVENTS
-   INT int_EVENT_SELECT
-#endif
-   RETURN
-
-; 
-; select_done
-; 
-; PURPOSE: continue on to normal data transfer; called as the exit 
-;	point from dsa_begin.
-;
-; INPUTS: dsa
-;
-; CALLS: OK
-;
-;
-
-select_done:
-#if (CHIP == 710)
-; NOTE DSA is corrupt when we arrive here!
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-#endif
-
-#ifdef DEBUG
-ENTRY select_check_dsa
-select_check_dsa:
-    INT int_debug_check_dsa
-#endif
-
-; After a successful selection, we should get either a CMD phase or 
-; some transfer request negotiation message.
-
-    JUMP cmdout, WHEN CMD
-    INT int_err_unexpected_phase, WHEN NOT MSG_IN 
-
-select_msg_in:
-    CALL msg_in, WHEN MSG_IN
-    JUMP select_msg_in, WHEN MSG_IN
-
-cmdout:
-    INT int_err_unexpected_phase, WHEN NOT CMD
-#if (CHIP == 700)
-    INT int_norm_selected
-#endif
-ENTRY cmdout_cmdout
-cmdout_cmdout:
-#if (CHIP != 700) && (CHIP != 70066)
-    MOVE FROM dsa_cmdout, WHEN CMD
-#else
-    MOVE 0, 0, WHEN CMD
-#endif /* (CHIP != 700) && (CHIP != 70066) */
-
-;
-; data_transfer  
-; other_out
-; other_in
-; other_transfer
-;
-; PURPOSE : handle the main data transfer for a SCSI command in 
-;	several parts.  In the first part, data_transfer, DATA_IN
-;	and DATA_OUT phases are allowed, with the user provided
-;	code (usually dynamically generated based on the scatter/gather
-;	list associated with a SCSI command) called to handle these 
-;	phases.
-;
-;	After control has passed to one of the user provided 
-;	DATA_IN or DATA_OUT routines, back calls are made to 
-;	other_transfer_in or other_transfer_out to handle non-DATA IN
-;	and DATA OUT phases respectively, with the state of the active
-;	data pointer being preserved in TEMP.
-;
-;	On completion, the user code passes control to other_transfer
-;	which causes DATA_IN and DATA_OUT to result in unexpected_phase
-;	interrupts so that data overruns may be trapped.
-;
-; INPUTS : DSA - SCSI command
-;
-; CALLS : OK in data_transfer_start, not ok in other_out and other_in, ok in
-;	other_transfer
-;
-; MODIFIES : SCRATCH
-;
-; EXITS : if STATUS IN is detected, signifying command completion,
-;	the NCR jumps to command_complete.  If MSG IN occurs, a 
-;	CALL is made to msg_in.  Otherwise, other_transfer runs in 
-;	an infinite loop.
-;	
-
-ENTRY data_transfer
-data_transfer:
-    JUMP cmdout_cmdout, WHEN CMD
-    CALL msg_in, WHEN MSG_IN
-    INT int_err_unexpected_phase, WHEN MSG_OUT
-    JUMP do_dataout, WHEN DATA_OUT
-    JUMP do_datain, WHEN DATA_IN
-    JUMP command_complete, WHEN STATUS
-    JUMP data_transfer
-ENTRY end_data_transfer
-end_data_transfer:
-
-;
-; FIXME: On NCR53c700 and NCR53c700-66 chips, do_dataout/do_datain 
-; should be fixed up whenever the nexus changes so it can point to the 
-; correct routine for that command.
-;
-
-#if (CHIP != 700) && (CHIP != 70066)
-; Nasty jump to dsa->dataout
-do_dataout:
-#if (CHIP == 710)
-    MOVE MEMORY 4, saved_dsa, addr_scratch
-#else
-    CALL dsa_to_scratch
-#endif
-    MOVE SCRATCH0 + dsa_dataout TO SCRATCH0	
-    MOVE SCRATCH1 + 0 TO SCRATCH1 WITH CARRY 
-    MOVE SCRATCH2 + 0 TO SCRATCH2 WITH CARRY 
-    MOVE SCRATCH3 + 0 TO SCRATCH3 WITH CARRY 
-    DMODE_NCR_TO_MEMORY
-    MOVE MEMORY 4, addr_scratch, dataout_to_jump + 4
-    DMODE_MEMORY_TO_MEMORY
-dataout_to_jump:
-    MOVE MEMORY 4, 0, dataout_jump + 4 
-#if (CHIP == 710)
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-#endif
-dataout_jump:
-    JUMP 0
-
-; Nasty jump to dsa->dsain
-do_datain:
-#if (CHIP == 710)
-    MOVE MEMORY 4, saved_dsa, addr_scratch
-#else
-    CALL dsa_to_scratch
-#endif
-    MOVE SCRATCH0 + dsa_datain TO SCRATCH0	
-    MOVE SCRATCH1 + 0 TO SCRATCH1 WITH CARRY 
-    MOVE SCRATCH2 + 0 TO SCRATCH2 WITH CARRY 
-    MOVE SCRATCH3 + 0 TO SCRATCH3 WITH CARRY 
-    DMODE_NCR_TO_MEMORY
-    MOVE MEMORY 4, addr_scratch, datain_to_jump + 4
-    DMODE_MEMORY_TO_MEMORY
-ENTRY datain_to_jump
-datain_to_jump:
-    MOVE MEMORY 4, 0, datain_jump + 4
-#if (CHIP == 710)
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-#endif
-#ifdef DEBUG
-    INT int_debug_datain
-#endif
-datain_jump:
-    JUMP 0
-#endif /* (CHIP != 700) && (CHIP != 70066) */
-
-
-; Note that other_out and other_in loop until a non-data phase
-; is discovered, so we only execute return statements when we
-; can go on to the next data phase block move statement.
-
-ENTRY other_out
-other_out:
-#if 0
-    INT 0x03ffdead
-#endif
-    INT int_err_unexpected_phase, WHEN CMD
-    JUMP msg_in_restart, WHEN MSG_IN 
-    INT int_err_unexpected_phase, WHEN MSG_OUT
-    INT int_err_unexpected_phase, WHEN DATA_IN
-    JUMP command_complete, WHEN STATUS
-    JUMP other_out, WHEN NOT DATA_OUT
-#if (CHIP == 710)
-; TEMP should be OK, as we got here from a call in the user dataout code.
-#endif
-    RETURN
-
-ENTRY other_in
-other_in:
-#if 0
-    INT 0x03ffdead
-#endif
-    INT int_err_unexpected_phase, WHEN CMD
-    JUMP msg_in_restart, WHEN MSG_IN 
-    INT int_err_unexpected_phase, WHEN MSG_OUT
-    INT int_err_unexpected_phase, WHEN DATA_OUT
-    JUMP command_complete, WHEN STATUS
-    JUMP other_in, WHEN NOT DATA_IN
-#if (CHIP == 710)
-; TEMP should be OK, as we got here from a call in the user datain code.
-#endif
-    RETURN
-
-
-ENTRY other_transfer
-other_transfer:
-    INT int_err_unexpected_phase, WHEN CMD
-    CALL msg_in, WHEN MSG_IN
-    INT int_err_unexpected_phase, WHEN MSG_OUT
-    INT int_err_unexpected_phase, WHEN DATA_OUT
-    INT int_err_unexpected_phase, WHEN DATA_IN
-    JUMP command_complete, WHEN STATUS
-    JUMP other_transfer
-
-;
-; msg_in_restart
-; msg_in
-; munge_msg
-;
-; PURPOSE : process messages from a target.  msg_in is called when the 
-;	caller hasn't read the first byte of the message.  munge_message
-;	is called when the caller has read the first byte of the message,
-;	and left it in SFBR.  msg_in_restart is called when the caller 
-;	hasn't read the first byte of the message, and wishes RETURN
-;	to transfer control back to the address of the conditional
-;	CALL instruction rather than to the instruction after it.
-;
-;	Various int_* interrupts are generated when the host system
-;	needs to intervene, as is the case with SDTR, WDTR, and
-;	INITIATE RECOVERY messages.
-;
-;	When the host system handles one of these interrupts,
-;	it can respond by reentering at reject_message, 
-;	which rejects the message and returns control to
-;	the caller of msg_in or munge_msg, accept_message
-;	which clears ACK and returns control, or reply_message
-;	which sends the message pointed to by the DSA 
-;	msgout_other table indirect field.
-;
-;	DISCONNECT messages are handled by moving the command
-;	to the reconnect_dsa_queue.
-#if (CHIP == 710)
-; NOTE: DSA should be valid when we get here - we cannot save both it
-;	and TEMP in this routine.
-#endif
-;
-; INPUTS : DSA - SCSI COMMAND, SFBR - first byte of message (munge_msg
-;	only)
-;
-; CALLS : NO.  The TEMP register isn't backed up to allow nested calls.
-;
-; MODIFIES : SCRATCH, DSA on DISCONNECT
-;
-; EXITS : On receipt of SAVE DATA POINTER, RESTORE POINTERS,
-;	and normal return from message handlers running under
-;	Linux, control is returned to the caller.  Receipt
-;	of DISCONNECT messages pass control to dsa_schedule.
-;
-ENTRY msg_in_restart
-msg_in_restart:
-; XXX - hackish
-;
-; Since it's easier to debug changes to the statically 
-; compiled code, rather than the dynamically generated 
-; stuff, such as
-;
-; 	MOVE x, y, WHEN data_phase
-; 	CALL other_z, WHEN NOT data_phase
-; 	MOVE x, y, WHEN data_phase
-;
-; I'd like to have certain routines (notably the message handler)
-; restart on the conditional call rather than the next instruction.
-;
-; So, subtract 8 from the return address
-
-    MOVE TEMP0 + 0xf8 TO TEMP0
-    MOVE TEMP1 + 0xff TO TEMP1 WITH CARRY
-    MOVE TEMP2 + 0xff TO TEMP2 WITH CARRY
-    MOVE TEMP3 + 0xff TO TEMP3 WITH CARRY
-
-ENTRY msg_in
-msg_in:
-    MOVE 1, msg_buf, WHEN MSG_IN
-
-munge_msg:
-    JUMP munge_extended, IF 0x01		; EXTENDED MESSAGE
-    JUMP munge_2, IF 0x20, AND MASK 0xdf	; two byte message
-;
-; XXX - I've seen a handful of broken SCSI devices which fail to issue
-; 	a SAVE POINTERS message before disconnecting in the middle of 
-; 	a transfer, assuming that the DATA POINTER will be implicitly 
-; 	restored.  
-;
-; Historically, I've often done an implicit save when the DISCONNECT
-; message is processed.  We may want to consider having the option of 
-; doing that here. 
-;
-    JUMP munge_save_data_pointer, IF 0x02	; SAVE DATA POINTER
-    JUMP munge_restore_pointers, IF 0x03	; RESTORE POINTERS 
-    JUMP munge_disconnect, IF 0x04		; DISCONNECT
-    INT int_msg_1, IF 0x07			; MESSAGE REJECT
-    INT int_msg_1, IF 0x0f			; INITIATE RECOVERY
-#ifdef EVENTS 
-    INT int_EVENT_SELECT_FAILED 
-#endif
-    JUMP reject_message
-
-munge_2:
-    JUMP reject_message
-;
-; The SCSI standard allows targets to recover from transient 
-; error conditions by backing up the data pointer with a 
-; RESTORE POINTERS message.  
-;	
-; So, we must save and restore the _residual_ code as well as 
-; the current instruction pointer.  Because of this messiness,
-; it is simpler to put dynamic code in the dsa for this and to
-; just do a simple jump down there. 
-;
-
-munge_save_data_pointer:
-#if (CHIP == 710)
-    ; We have something in TEMP here, so first we must save that
-    MOVE TEMP0 TO SFBR
-    MOVE SFBR TO SCRATCH0
-    MOVE TEMP1 TO SFBR
-    MOVE SFBR TO SCRATCH1
-    MOVE TEMP2 TO SFBR
-    MOVE SFBR TO SCRATCH2
-    MOVE TEMP3 TO SFBR
-    MOVE SFBR TO SCRATCH3
-    MOVE MEMORY 4, addr_scratch, jump_temp + 4
-    ; Now restore DSA
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-#endif
-    MOVE DSA0 + dsa_save_data_pointer TO SFBR
-    MOVE SFBR TO SCRATCH0
-    MOVE DSA1 + 0xff TO SFBR WITH CARRY
-    MOVE SFBR TO SCRATCH1
-    MOVE DSA2 + 0xff TO SFBR WITH CARRY 
-    MOVE SFBR TO SCRATCH2
-    MOVE DSA3 + 0xff TO SFBR WITH CARRY
-    MOVE SFBR TO SCRATCH3
-
-    DMODE_NCR_TO_MEMORY
-    MOVE MEMORY 4, addr_scratch, jump_dsa_save + 4
-    DMODE_MEMORY_TO_MEMORY
-jump_dsa_save:
-    JUMP 0
-
-munge_restore_pointers:
-#if (CHIP == 710)
-    ; The code at dsa_restore_pointers will RETURN, but we don't care
-    ; about TEMP here, as it will overwrite it anyway.
-#endif
-    MOVE DSA0 + dsa_restore_pointers TO SFBR
-    MOVE SFBR TO SCRATCH0
-    MOVE DSA1 + 0xff TO SFBR WITH CARRY
-    MOVE SFBR TO SCRATCH1
-    MOVE DSA2 + 0xff TO SFBR WITH CARRY
-    MOVE SFBR TO SCRATCH2
-    MOVE DSA3 + 0xff TO SFBR WITH CARRY
-    MOVE SFBR TO SCRATCH3
-
-    DMODE_NCR_TO_MEMORY
-    MOVE MEMORY 4, addr_scratch, jump_dsa_restore + 4
-    DMODE_MEMORY_TO_MEMORY
-jump_dsa_restore:
-    JUMP 0
-
-
-munge_disconnect:
-#ifdef DEBUG
-    INT int_debug_disconnect_msg
-#endif
-
-/* 
- * Before, we overlapped processing with waiting for disconnect, but
- * debugging was beginning to appear messy.  Temporarily move things
- * to just before the WAIT DISCONNECT.
- */
- 
-#ifdef ORIGINAL
-#if (CHIP == 710)
-; Following clears Unexpected Disconnect bit.  What do we do?
-#else
-    MOVE SCNTL2 & 0x7f TO SCNTL2
-#endif
-    CLEAR ACK
-#endif
-
-#if (CHIP != 700) && (CHIP != 70066)
-    JUMP dsa_schedule
-#else
-    WAIT DISCONNECT
-    INT int_norm_disconnected
-#endif
-
-munge_extended:
-    CLEAR ACK
-    INT int_err_unexpected_phase, WHEN NOT MSG_IN
-    MOVE 1, msg_buf + 1, WHEN MSG_IN
-    JUMP munge_extended_2, IF 0x02
-    JUMP munge_extended_3, IF 0x03 
-    JUMP reject_message
-
-munge_extended_2:
-    CLEAR ACK
-    MOVE 1, msg_buf + 2, WHEN MSG_IN
-    JUMP reject_message, IF NOT 0x02	; Must be WDTR
-    CLEAR ACK
-    MOVE 1, msg_buf + 3, WHEN MSG_IN
-    INT int_msg_wdtr
-
-munge_extended_3:
-    CLEAR ACK
-    MOVE 1, msg_buf + 2, WHEN MSG_IN
-    JUMP reject_message, IF NOT 0x01	; Must be SDTR
-    CLEAR ACK
-    MOVE 2, msg_buf + 3, WHEN MSG_IN
-    INT int_msg_sdtr
-
-ENTRY reject_message
-reject_message:
-    SET ATN
-    CLEAR ACK
-    MOVE 1, NCR53c7xx_msg_reject, WHEN MSG_OUT
-    RETURN
-
-ENTRY accept_message
-accept_message:
-    CLEAR ATN
-    CLEAR ACK
-    RETURN
-
-ENTRY respond_message
-respond_message:
-    SET ATN
-    CLEAR ACK
-    MOVE FROM dsa_msgout_other, WHEN MSG_OUT
-    RETURN
-
-;
-; command_complete
-;
-; PURPOSE : handle command termination when STATUS IN is detected by reading
-;	a status byte followed by a command termination message. 
-;
-;	Normal termination results in an INTFLY instruction, and 
-;	the host system can pick out which command terminated by 
-;	examining the MESSAGE and STATUS buffers of all currently 
-;	executing commands;
-;
-;	Abnormal (CHECK_CONDITION) termination results in an
-;	int_err_check_condition interrupt so that a REQUEST SENSE
-;	command can be issued out-of-order so that no other command
-;	clears the contingent allegiance condition.
-;	
-;
-; INPUTS : DSA - command	
-;
-; CALLS : OK
-;
-; EXITS : On successful termination, control is passed to schedule.
-;	On abnormal termination, the user will usually modify the 
-;	DSA fields and corresponding buffers and return control
-;	to select.
-;
-
-ENTRY command_complete
-command_complete:
-    MOVE FROM dsa_status, WHEN STATUS
-#if (CHIP != 700) && (CHIP != 70066)
-    MOVE SFBR TO SCRATCH0		; Save status
-#endif /* (CHIP != 700) && (CHIP != 70066) */
-ENTRY command_complete_msgin
-command_complete_msgin:
-    MOVE FROM dsa_msgin, WHEN MSG_IN
-; Indicate that we should be expecting a disconnect
-#if (CHIP != 710)
-    MOVE SCNTL2 & 0x7f TO SCNTL2
-#else
-    ; Above code cleared the Unexpected Disconnect bit, what do we do?
-#endif
-    CLEAR ACK
-#if (CHIP != 700) && (CHIP != 70066)
-    WAIT DISCONNECT
-
-;
-; The SCSI specification states that when a UNIT ATTENTION condition
-; is pending, as indicated by a CHECK CONDITION status message,
-; the target shall revert to asynchronous transfers.  Since
-; synchronous transfers parameters are maintained on a per INITIATOR/TARGET 
-; basis, and returning control to our scheduler could work on a command
-; running on another lun on that target using the old parameters, we must
-; interrupt the host processor to get them changed, or change them ourselves.
-;
-; Once SCSI-II tagged queueing is implemented, things will be even more
-; hairy, since contingent allegiance conditions exist on a per-target/lun
-; basis, and issuing a new command with a different tag would clear it.
-; In these cases, we must interrupt the host processor to get a request 
-; added to the HEAD of the queue with the request sense command, or we
-; must automatically issue the request sense command.
-
-#if 0
-    MOVE SCRATCH0 TO SFBR			
-    JUMP command_failed, IF 0x02
-#endif
-#if (CHIP == 710)
-#if defined(MVME16x_INTFLY)
-; For MVME16x (ie CHIP=710) we will force an INTFLY by triggering a software
-; interrupt (SW7).  We can use SCRATCH, as we are about to jump to
-; schedule, which corrupts it anyway.  Will probably remove this later,
-; but want to check performance effects first.
-
-#define INTFLY_ADDR     0xfff40070
-
-    MOVE 0 TO SCRATCH0
-    MOVE 0x80 TO SCRATCH1
-    MOVE 0 TO SCRATCH2
-    MOVE 0 TO SCRATCH3
-    MOVE MEMORY 4, addr_scratch, INTFLY_ADDR
-#else
-    INT int_norm_emulateintfly
-#endif
-#else
-    INTFLY
-#endif
-#endif /* (CHIP != 700) && (CHIP != 70066) */
-#if (CHIP == 710)
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-#endif
-#ifdef EVENTS
-    INT int_EVENT_COMPLETE
-#endif
-#if (CHIP != 700) && (CHIP != 70066)
-    JUMP schedule
-command_failed:
-    INT int_err_check_condition
-#else
-    INT int_norm_command_complete
-#endif
-
-;
-; wait_reselect
-;
-; PURPOSE : This is essentially the idle routine, where control lands
-;	when there are no new processes to schedule.  wait_reselect
-;	waits for reselection, selection, and new commands.
-;
-;	When a successful reselection occurs, with the aid 
-;	of fixed up code in each DSA, wait_reselect walks the 
-;	reconnect_dsa_queue, asking each dsa if the target ID
-;	and LUN match its.
-;
-;	If a match is found, a call is made back to reselected_ok,
-;	which through the miracles of self modifying code, extracts
-;	the found DSA from the reconnect_dsa_queue and then 
-;	returns control to the DSAs thread of execution.
-;
-; INPUTS : NONE
-;
-; CALLS : OK
-;
-; MODIFIES : DSA,
-;
-; EXITS : On successful reselection, control is returned to the 
-;	DSA which called reselected_ok.  If the WAIT RESELECT
-;	was interrupted by a new commands arrival signaled by 
-;	SIG_P, control is passed to schedule.  If the NCR is 
-;	selected, the host system is interrupted with an 
-;	int_err_selected which is usually responded to by
-;	setting DSP to the target_abort address.
-
-ENTRY wait_reselect
-wait_reselect:
-#ifdef EVENTS
-    int int_EVENT_IDLE
-#endif
-#ifdef DEBUG
-    int int_debug_idle
-#endif
-    WAIT RESELECT wait_reselect_failed
-
-reselected:
-#ifdef EVENTS
-    int int_EVENT_RESELECT
-#endif
-    CLEAR TARGET
-    DMODE_MEMORY_TO_MEMORY
-    ; Read all data needed to reestablish the nexus - 
-    MOVE 1, reselected_identify, WHEN MSG_IN
-    ; We used to CLEAR ACK here.
-#if (CHIP != 700) && (CHIP != 70066)
-#ifdef DEBUG
-    int int_debug_reselected
-#endif
-
-    ; Point DSA at the current head of the disconnected queue.
-    DMODE_MEMORY_TO_NCR
-    MOVE MEMORY 4, reconnect_dsa_head, addr_scratch
-    DMODE_MEMORY_TO_MEMORY
-#if (CHIP == 710)
-    MOVE MEMORY 4, addr_scratch, saved_dsa
-#else
-    CALL scratch_to_dsa
-#endif
-
-    ; Fix the update-next pointer so that the reconnect_dsa_head
-    ; pointer is the one that will be updated if this DSA is a hit 
-    ; and we remove it from the queue.
-
-    MOVE MEMORY 4, addr_reconnect_dsa_head, reselected_ok_patch + 8
-#if (CHIP == 710)
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-#endif
-
-ENTRY reselected_check_next
-reselected_check_next:
-#ifdef DEBUG
-    INT int_debug_reselect_check
-#endif
-    ; Check for a NULL pointer.
-    MOVE DSA0 TO SFBR
-    JUMP reselected_not_end, IF NOT 0
-    MOVE DSA1 TO SFBR
-    JUMP reselected_not_end, IF NOT 0
-    MOVE DSA2 TO SFBR
-    JUMP reselected_not_end, IF NOT 0
-    MOVE DSA3 TO SFBR
-    JUMP reselected_not_end, IF NOT 0
-    INT int_err_unexpected_reselect
-
-reselected_not_end:
-    ;
-    ; XXX the ALU is only eight bits wide, and the assembler
-    ; wont do the dirt work for us.  As long as dsa_check_reselect
-    ; is negative, we need to sign extend with 1 bits to the full
-    ; 32 bit width of the address.
-    ;
-    ; A potential work around would be to have a known alignment 
-    ; of the DSA structure such that the base address plus 
-    ; dsa_check_reselect doesn't require carrying from bytes 
-    ; higher than the LSB.
-    ;
-
-    MOVE DSA0 TO SFBR
-    MOVE SFBR + dsa_check_reselect TO SCRATCH0
-    MOVE DSA1 TO SFBR
-    MOVE SFBR + 0xff TO SCRATCH1 WITH CARRY
-    MOVE DSA2 TO SFBR
-    MOVE SFBR + 0xff TO SCRATCH2 WITH CARRY
-    MOVE DSA3 TO SFBR
-    MOVE SFBR + 0xff TO SCRATCH3 WITH CARRY
-
-    DMODE_NCR_TO_MEMORY
-    MOVE MEMORY 4, addr_scratch, reselected_check + 4
-    DMODE_MEMORY_TO_MEMORY
-#if (CHIP == 710)
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-#endif
-reselected_check:
-    JUMP 0
-
-
-;
-;
-#if (CHIP == 710)
-; We have problems here - the memory move corrupts TEMP and DSA.  This
-; routine is called from DSA code, and patched from many places.  Scratch
-; is probably free when it is called.
-; We have to:
-;   copy temp to scratch, one byte at a time
-;   write scratch to patch a jump in place of the return
-;   do the move memory
-;   jump to the patched in return address
-; DSA is corrupt when we get here, and can be left corrupt
-
-ENTRY reselected_ok
-reselected_ok:
-    MOVE TEMP0 TO SFBR
-    MOVE SFBR TO SCRATCH0
-    MOVE TEMP1 TO SFBR
-    MOVE SFBR TO SCRATCH1
-    MOVE TEMP2 TO SFBR
-    MOVE SFBR TO SCRATCH2
-    MOVE TEMP3 TO SFBR
-    MOVE SFBR TO SCRATCH3
-    MOVE MEMORY 4, addr_scratch, reselected_ok_jump + 4
-reselected_ok_patch:
-    MOVE MEMORY 4, 0, 0
-reselected_ok_jump:
-    JUMP 0
-#else
-ENTRY reselected_ok
-reselected_ok:
-reselected_ok_patch:
-    MOVE MEMORY 4, 0, 0				; Patched : first word
-						; 	is address of 
-						;       successful dsa_next
-						; Second word is last 
-						;	unsuccessful dsa_next,
-						;	starting with 
-						;       dsa_reconnect_head
-    ; We used to CLEAR ACK here.
-#ifdef DEBUG
-    INT int_debug_reselected_ok
-#endif
-#ifdef DEBUG
-    INT int_debug_check_dsa
-#endif
-    RETURN					; Return control to where
-#endif
-#else
-    INT int_norm_reselected
-#endif /* (CHIP != 700) && (CHIP != 70066) */
-
-selected:
-    INT int_err_selected;
-
-;
-; A select or reselect failure can be caused by one of two conditions : 
-; 1.  SIG_P was set.  This will be the case if the user has written
-;	a new value to a previously NULL head of the issue queue.
-;
-; 2.  The NCR53c810 was selected or reselected by another device.
-;
-; 3.  The bus was already busy since we were selected or reselected
-;	before starting the command.
-
-wait_reselect_failed:
-#ifdef EVENTS 
-	INT int_EVENT_RESELECT_FAILED
-#endif
-; Check selected bit.  
-#if (CHIP == 710)
-    ; Must work out how to tell if we are selected....
-#else
-    MOVE SIST0 & 0x20 TO SFBR
-    JUMP selected, IF 0x20
-#endif
-; Reading CTEST2 clears the SIG_P bit in the ISTAT register.
-    MOVE CTEST2 & 0x40 TO SFBR	
-    JUMP schedule, IF 0x40
-; Check connected bit.  
-; FIXME: this needs to change if we support target mode
-    MOVE ISTAT & 0x08 TO SFBR
-    JUMP reselected, IF 0x08
-; FIXME : Something bogus happened, and we shouldn't fail silently.
-#if 0
-    JUMP schedule
-#else
-    INT int_debug_panic
-#endif
-
-
-select_failed:
-#if (CHIP == 710)
-    ; Disable selection timer
-    MOVE CTEST7 | 0x10 TO CTEST7
-#endif
-#ifdef EVENTS
-  int int_EVENT_SELECT_FAILED
-#endif
-; Otherwise, mask the selected and reselected bits off SIST0
-#if (CHIP ==710)
-    ; Let's assume we don't get selected for now
-    MOVE SSTAT0 & 0x10 TO SFBR
-#else
-    MOVE SIST0 & 0x30 TO SFBR
-    JUMP selected, IF 0x20
-#endif
-    JUMP reselected, IF 0x10 
-; If SIGP is set, the user just gave us another command, and
-; we should restart or return to the scheduler.
-; Reading CTEST2 clears the SIG_P bit in the ISTAT register.
-    MOVE CTEST2 & 0x40 TO SFBR	
-    JUMP select, IF 0x40
-; Check connected bit.  
-; FIXME: this needs to change if we support target mode
-; FIXME: is this really necessary? 
-    MOVE ISTAT & 0x08 TO SFBR
-    JUMP reselected, IF 0x08
-; FIXME : Something bogus happened, and we shouldn't fail silently.
-#if 0
-    JUMP schedule
-#else
-    INT int_debug_panic
-#endif
-
-;
-; test_1
-; test_2
-;
-; PURPOSE : run some verification tests on the NCR.  test_1
-;	copies test_src to test_dest and interrupts the host
-;	processor, testing for cache coherency and interrupt
-; 	problems in the processes.
-;
-;	test_2 runs a command with offsets relative to the 
-;	DSA on entry, and is useful for miscellaneous experimentation.
-;
-
-; Verify that interrupts are working correctly and that we don't 
-; have a cache invalidation problem.
-
-ABSOLUTE test_src = 0, test_dest = 0
-ENTRY test_1
-test_1:
-    MOVE MEMORY 4, test_src, test_dest
-    INT int_test_1
-
-;
-; Run arbitrary commands, with test code establishing a DSA
-;
- 
-ENTRY test_2
-test_2:
-    CLEAR TARGET
-#if (CHIP == 710)
-    ; Enable selection timer
-#ifdef NO_SELECTION_TIMEOUT
-    MOVE CTEST7 & 0xff TO CTEST7
-#else
-    MOVE CTEST7 & 0xef TO CTEST7
-#endif
-#endif
-    SELECT ATN FROM 0, test_2_fail
-    JUMP test_2_msgout, WHEN MSG_OUT
-ENTRY test_2_msgout
-test_2_msgout:
-#if (CHIP == 710)
-    ; Disable selection timer
-    MOVE CTEST7 | 0x10 TO CTEST7
-#endif
-    MOVE FROM 8, WHEN MSG_OUT
-    MOVE FROM 16, WHEN CMD 
-    MOVE FROM 24, WHEN DATA_IN
-    MOVE FROM 32, WHEN STATUS
-    MOVE FROM 40, WHEN MSG_IN
-#if (CHIP != 710)
-    MOVE SCNTL2 & 0x7f TO SCNTL2
-#endif
-    CLEAR ACK
-    WAIT DISCONNECT
-test_2_fail:
-#if (CHIP == 710)
-    ; Disable selection timer
-    MOVE CTEST7 | 0x10 TO CTEST7
-#endif
-    INT int_test_2
-
-ENTRY debug_break
-debug_break:
-    INT int_debug_break
-
-;
-; initiator_abort
-; target_abort
-;
-; PURPOSE : Abort the currently established nexus from with initiator
-;	or target mode.
-;
-;  
-
-ENTRY target_abort
-target_abort:
-    SET TARGET
-    DISCONNECT
-    CLEAR TARGET
-    JUMP schedule
-    
-ENTRY initiator_abort
-initiator_abort:
-    SET ATN
-;
-; The SCSI-I specification says that targets may go into MSG out at 
-; their leisure upon receipt of the ATN single.  On all versions of the 
-; specification, we can't change phases until REQ transitions true->false, 
-; so we need to sink/source one byte of data to allow the transition.
-;
-; For the sake of safety, we'll only source one byte of data in all 
-; cases, but to accommodate the SCSI-I dain bramage, we'll sink an  
-; arbitrary number of bytes.
-    JUMP spew_cmd, WHEN CMD
-    JUMP eat_msgin, WHEN MSG_IN
-    JUMP eat_datain, WHEN DATA_IN
-    JUMP eat_status, WHEN STATUS
-    JUMP spew_dataout, WHEN DATA_OUT
-    JUMP sated
-spew_cmd:
-    MOVE 1, NCR53c7xx_zero, WHEN CMD
-    JUMP sated
-eat_msgin:
-    MOVE 1, NCR53c7xx_sink, WHEN MSG_IN
-    JUMP eat_msgin, WHEN MSG_IN
-    JUMP sated
-eat_status:
-    MOVE 1, NCR53c7xx_sink, WHEN STATUS
-    JUMP eat_status, WHEN STATUS
-    JUMP sated
-eat_datain:
-    MOVE 1, NCR53c7xx_sink, WHEN DATA_IN
-    JUMP eat_datain, WHEN DATA_IN
-    JUMP sated
-spew_dataout:
-    MOVE 1, NCR53c7xx_zero, WHEN DATA_OUT
-sated:
-#if (CHIP != 710)
-    MOVE SCNTL2 & 0x7f TO SCNTL2
-#endif
-    MOVE 1, NCR53c7xx_msg_abort, WHEN MSG_OUT
-    WAIT DISCONNECT
-    INT int_norm_aborted
-
-#if (CHIP != 710)
-;
-; dsa_to_scratch
-; scratch_to_dsa
-;
-; PURPOSE :
-; 	The NCR chips cannot do a move memory instruction with the DSA register 
-; 	as the source or destination.  So, we provide a couple of subroutines
-; 	that let us switch between the DSA register and scratch register.
-;
-; 	Memory moves to/from the DSPS  register also don't work, but we 
-; 	don't use them.
-;
-;
-
- 
-dsa_to_scratch:
-    MOVE DSA0 TO SFBR
-    MOVE SFBR TO SCRATCH0
-    MOVE DSA1 TO SFBR
-    MOVE SFBR TO SCRATCH1
-    MOVE DSA2 TO SFBR
-    MOVE SFBR TO SCRATCH2
-    MOVE DSA3 TO SFBR
-    MOVE SFBR TO SCRATCH3
-    RETURN
-
-scratch_to_dsa:
-    MOVE SCRATCH0 TO SFBR
-    MOVE SFBR TO DSA0
-    MOVE SCRATCH1 TO SFBR
-    MOVE SFBR TO DSA1
-    MOVE SCRATCH2 TO SFBR
-    MOVE SFBR TO DSA2
-    MOVE SCRATCH3 TO SFBR
-    MOVE SFBR TO DSA3
-    RETURN
-#endif
- 
-#if (CHIP == 710)
-; Little patched jump, used to overcome problems with TEMP getting
-; corrupted on memory moves.
-
-jump_temp:
-    JUMP 0
-#endif
diff --git a/drivers/scsi/53c7xx_d.h_shipped b/drivers/scsi/53c7xx_d.h_shipped
deleted file mode 100644
index 21d31b08ec3..00000000000
--- a/drivers/scsi/53c7xx_d.h_shipped
+++ /dev/null
@@ -1,2874 +0,0 @@
-/* DO NOT EDIT - Generated automatically by script_asm.pl */
-static u32 SCRIPT[] = {
-/*
-
-
-
-
-
-; 53c710 driver.  Modified from Drew Eckhardts driver
-; for 53c810 by Richard Hirst [richard@sleepie.demon.co.uk]
-;
-; I have left the script for the 53c8xx family in here, as it is likely
-; to be useful to see what I changed when bug hunting.
-
-; NCR 53c810 driver, main script
-; Sponsored by 
-;	iX Multiuser Multitasking Magazine
-;	hm@ix.de
-;
-; Copyright 1993, 1994, 1995 Drew Eckhardt
-;      Visionary Computing 
-;      (Unix and Linux consulting and custom programming)
-;      drew@PoohSticks.ORG
-;      +1 (303) 786-7975
-;
-; TolerANT and SCSI SCRIPTS are registered trademarks of NCR Corporation.
-;
-; PRE-ALPHA
-;
-; For more information, please consult 
-;
-; NCR 53C810
-; PCI-SCSI I/O Processor
-; Data Manual
-;
-; NCR 53C710 
-; SCSI I/O Processor
-; Programmers Guide
-;
-; NCR Microelectronics
-; 1635 Aeroplaza Drive
-; Colorado Springs, CO 80916
-; 1+ (719) 578-3400
-;
-; Toll free literature number
-; +1 (800) 334-5454
-;
-; IMPORTANT : This code is self modifying due to the limitations of 
-;	the NCR53c7,8xx series chips.  Persons debugging this code with
-;	the remote debugger should take this into account, and NOT set
-;	breakpoints in modified instructions.
-;
-; Design:
-; The NCR53c7,8xx family of SCSI chips are busmasters with an onboard 
-; microcontroller using a simple instruction set.   
-;
-; So, to minimize the effects of interrupt latency, and to maximize 
-; throughput, this driver offloads the practical maximum amount 
-; of processing to the SCSI chip while still maintaining a common
-; structure.
-;
-; Where tradeoffs were needed between efficiency on the older
-; chips and the newer NCR53c800 series, the NCR53c800 series 
-; was chosen.
-;
-; While the NCR53c700 and NCR53c700-66 lacked the facilities to fully
-; automate SCSI transfers without host processor intervention, this 
-; isn't the case with the NCR53c710 and newer chips which allow 
-;
-; - reads and writes to the internal registers from within the SCSI
-; 	scripts, allowing the SCSI SCRIPTS(tm) code to save processor
-; 	state so that multiple threads of execution are possible, and also
-; 	provide an ALU for loop control, etc.
-; 
-; - table indirect addressing for some instructions. This allows 
-;	pointers to be located relative to the DSA ((Data Structure
-;	Address) register.
-;
-; These features make it possible to implement a mailbox style interface,
-; where the same piece of code is run to handle I/O for multiple threads
-; at once minimizing our need to relocate code.  Since the NCR53c700/
-; NCR53c800 series have a unique combination of features, making a 
-; a standard ingoing/outgoing mailbox system, costly, I've modified it.
-;
-; - Mailboxes are a mixture of code and data.  This lets us greatly
-; 	simplify the NCR53c810 code and do things that would otherwise
-;	not be possible.
-;
-; The saved data pointer is now implemented as follows :
-;
-; 	Control flow has been architected such that if control reaches
-;	munge_save_data_pointer, on a restore pointers message or 
-;	reconnection, a jump to the address formerly in the TEMP register
-;	will allow the SCSI command to resume execution.
-;
-
-;
-; Note : the DSA structures must be aligned on 32 bit boundaries,
-; since the source and destination of MOVE MEMORY instructions 
-; must share the same alignment and this is the alignment of the
-; NCR registers.
-;
-
-; For some systems (MVME166, for example) dmode is always the same, so don't
-; waste time writing it
-
-
-
-
-
-
-
-
-
-
-
-ABSOLUTE dsa_temp_lun = 0		; Patch to lun for current dsa
-ABSOLUTE dsa_temp_next = 0		; Patch to dsa next for current dsa
-ABSOLUTE dsa_temp_addr_next = 0		; Patch to address of dsa next address 
-					; 	for current dsa
-ABSOLUTE dsa_temp_sync = 0		; Patch to address of per-target
-					;	sync routine
-ABSOLUTE dsa_sscf_710 = 0		; Patch to address of per-target
-					;	sscf value (53c710)
-ABSOLUTE dsa_temp_target = 0		; Patch to id for current dsa
-ABSOLUTE dsa_temp_addr_saved_pointer = 0; Patch to address of per-command
-					; 	saved data pointer
-ABSOLUTE dsa_temp_addr_residual = 0	; Patch to address of per-command
-					;	current residual code
-ABSOLUTE dsa_temp_addr_saved_residual = 0; Patch to address of per-command
-					; saved residual code
-ABSOLUTE dsa_temp_addr_new_value = 0	; Address of value for JUMP operand
-ABSOLUTE dsa_temp_addr_array_value = 0 	; Address to copy to
-ABSOLUTE dsa_temp_addr_dsa_value = 0	; Address of this DSA value
-
-;
-; Once a device has initiated reselection, we need to compare it 
-; against the singly linked list of commands which have disconnected
-; and are pending reselection.  These commands are maintained in 
-; an unordered singly linked list of DSA structures, through the
-; DSA pointers at their 'centers' headed by the reconnect_dsa_head
-; pointer.
-; 
-; To avoid complications in removing commands from the list,
-; I minimize the amount of expensive (at eight operations per
-; addition @ 500-600ns each) pointer operations which must
-; be done in the NCR driver by precomputing them on the 
-; host processor during dsa structure generation.
-;
-; The fixed-up per DSA code knows how to recognize the nexus
-; associated with the corresponding SCSI command, and modifies
-; the source and destination pointers for the MOVE MEMORY 
-; instruction which is executed when reselected_ok is called
-; to remove the command from the list.  Similarly, DSA is 
-; loaded with the address of the next DSA structure and
-; reselected_check_next is called if a failure occurs.
-;
-; Perhaps more concisely, the net effect of the mess is 
-;
-; for (dsa = reconnect_dsa_head, dest = &reconnect_dsa_head, 
-;     src = NULL; dsa; dest = &dsa->next, dsa = dsa->next) {
-; 	src = &dsa->next;
-; 	if (target_id == dsa->id && target_lun == dsa->lun) {
-; 		*dest = *src;
-; 		break;
-;         }	
-; }
-;
-; if (!dsa)
-;           error (int_err_unexpected_reselect);
-; else  
-;     longjmp (dsa->jump_resume, 0);
-;
-; 	
-
-
-; Define DSA structure used for mailboxes
-ENTRY dsa_code_template
-dsa_code_template:
-ENTRY dsa_code_begin
-dsa_code_begin:
-; RGH: Don't care about TEMP and DSA here
-	
-	MOVE MEMORY 4, dsa_temp_addr_dsa_value, addr_scratch
-
-at 0x00000000 : */	0xc0000004,0x00000000,0x00000000,
-/*
-	
-
-	MOVE MEMORY 4, addr_scratch, saved_dsa
-
-at 0x00000003 : */	0xc0000004,0x00000000,0x00000000,
-/*
-	; We are about to go and select the device, so must set SSCF bits
-	MOVE MEMORY 4, dsa_sscf_710, addr_scratch
-
-at 0x00000006 : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-	MOVE SCRATCH3 TO SFBR
-
-at 0x00000009 : */	0x72370000,0x00000000,
-/*
-
-
-
-	MOVE SFBR TO SBCL
-
-at 0x0000000b : */	0x6a0b0000,0x00000000,
-/*
-	MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x0000000d : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-
-	CALL select
-
-at 0x00000010 : */	0x88080000,0x000001f8,
-/*
-; Handle the phase mismatch which may have resulted from the 
-; MOVE FROM dsa_msgout if we returned here.  The CLEAR ATN 
-; may or may not be necessary, and we should update script_asm.pl
-; to handle multiple pieces.
-    CLEAR ATN
-
-at 0x00000012 : */	0x60000008,0x00000000,
-/*
-    CLEAR ACK
-
-at 0x00000014 : */	0x60000040,0x00000000,
-/*
-
-; Replace second operand with address of JUMP instruction dest operand
-; in schedule table for this DSA.  Becomes dsa_jump_dest in 53c7,8xx.c.
-ENTRY dsa_code_fix_jump
-dsa_code_fix_jump:
-	MOVE MEMORY 4, NOP_insn, 0
-
-at 0x00000016 : */	0xc0000004,0x00000000,0x00000000,
-/*
-	JUMP select_done
-
-at 0x00000019 : */	0x80080000,0x00000230,
-/*
-
-; wrong_dsa loads the DSA register with the value of the dsa_next
-; field.
-;
-wrong_dsa:
-
-;                NOTE DSA is corrupt when we arrive here!
-
-;		Patch the MOVE MEMORY INSTRUCTION such that 
-;		the destination address is the address of the OLD 
-;		next pointer.
-;
-	MOVE MEMORY 4, dsa_temp_addr_next, reselected_ok_patch + 8
-
-at 0x0000001b : */	0xc0000004,0x00000000,0x000007ec,
-/*
-	
-;
-; 	Move the _contents_ of the next pointer into the DSA register as 
-;	the next I_T_L or I_T_L_Q tupple to check against the established
-;	nexus.
-;
-	MOVE MEMORY 4, dsa_temp_next, addr_scratch
-
-at 0x0000001e : */	0xc0000004,0x00000000,0x00000000,
-/*
-	
-
-	MOVE MEMORY 4, addr_scratch, saved_dsa
-
-at 0x00000021 : */	0xc0000004,0x00000000,0x00000000,
-/*
-	MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x00000024 : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-
-	JUMP reselected_check_next
-
-at 0x00000027 : */	0x80080000,0x000006f0,
-/*
-
-ABSOLUTE dsa_save_data_pointer = 0
-ENTRY dsa_code_save_data_pointer
-dsa_code_save_data_pointer:
-
-	; When we get here, TEMP has been saved in jump_temp+4, DSA is corrupt
-	; We MUST return with DSA correct
-    	MOVE MEMORY 4, jump_temp+4, dsa_temp_addr_saved_pointer
-
-at 0x00000029 : */	0xc0000004,0x000009c8,0x00000000,
-/*
-; HARD CODED : 24 bytes needs to agree with 53c7,8xx.h
-    	MOVE MEMORY 24, dsa_temp_addr_residual, dsa_temp_addr_saved_residual
-
-at 0x0000002c : */	0xc0000018,0x00000000,0x00000000,
-/*
-        CLEAR ACK
-
-at 0x0000002f : */	0x60000040,0x00000000,
-/*
-
-
-
-	MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x00000031 : */	0xc0000004,0x00000000,0x00000000,
-/*
-	JUMP jump_temp
-
-at 0x00000034 : */	0x80080000,0x000009c4,
-/*
-
-ABSOLUTE dsa_restore_pointers = 0
-ENTRY dsa_code_restore_pointers
-dsa_code_restore_pointers:
-
-	; TEMP and DSA are corrupt when we get here, but who cares!
-    	MOVE MEMORY 4, dsa_temp_addr_saved_pointer, jump_temp + 4
-
-at 0x00000036 : */	0xc0000004,0x00000000,0x000009c8,
-/*
-; HARD CODED : 24 bytes needs to agree with 53c7,8xx.h
-    	MOVE MEMORY 24, dsa_temp_addr_saved_residual, dsa_temp_addr_residual
-
-at 0x00000039 : */	0xc0000018,0x00000000,0x00000000,
-/*
-        CLEAR ACK
-
-at 0x0000003c : */	0x60000040,0x00000000,
-/*
-	; Restore DSA, note we don't care about TEMP
-	MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x0000003e : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-
-	JUMP jump_temp
-
-at 0x00000041 : */	0x80080000,0x000009c4,
-/*
-
-
-ABSOLUTE dsa_check_reselect = 0
-; dsa_check_reselect determines whether or not the current target and
-; lun match the current DSA
-ENTRY dsa_code_check_reselect
-dsa_code_check_reselect:
-
-	
-	
-	MOVE LCRC TO SFBR		; LCRC has our ID and his ID bits set
-
-at 0x00000043 : */	0x72230000,0x00000000,
-/*
-	JUMP REL (wrong_dsa), IF NOT dsa_temp_target, AND MASK 0x80
-
-at 0x00000045 : */	0x80848000,0x00ffff50,
-/*
-
-
-
-
-
-;
-; Hack - move to scratch first, since SFBR is not writeable
-; 	via the CPU and hence a MOVE MEMORY instruction.
-;
-	
-	MOVE MEMORY 1, reselected_identify, addr_scratch
-
-at 0x00000047 : */	0xc0000001,0x00000000,0x00000000,
-/*
-	
-
-	; BIG ENDIAN ON MVME16x
-	MOVE SCRATCH3 TO SFBR
-
-at 0x0000004a : */	0x72370000,0x00000000,
-/*
-
-
-
-; FIXME : we need to accommodate bit fielded and binary here for '7xx/'8xx chips
-; Are you sure about that?  richard@sleepie.demon.co.uk
-	JUMP REL (wrong_dsa), IF NOT dsa_temp_lun, AND MASK 0xf8
-
-at 0x0000004c : */	0x8084f800,0x00ffff34,
-/*
-;		Patch the MOVE MEMORY INSTRUCTION such that
-;		the source address is the address of this dsa's
-;		next pointer.
-	MOVE MEMORY 4, dsa_temp_addr_next, reselected_ok_patch + 4
-
-at 0x0000004e : */	0xc0000004,0x00000000,0x000007e8,
-/*
-	CALL reselected_ok
-
-at 0x00000051 : */	0x88080000,0x00000798,
-/*
-
-;	Restore DSA following memory moves in reselected_ok
-;	dsa_temp_sync doesn't really care about DSA, but it has an
-;	optional debug INT so a valid DSA is a good idea.
-	MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x00000053 : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-	CALL dsa_temp_sync	
-
-at 0x00000056 : */	0x88080000,0x00000000,
-/*
-; Release ACK on the IDENTIFY message _after_ we've set the synchronous 
-; transfer parameters! 
-	CLEAR ACK
-
-at 0x00000058 : */	0x60000040,0x00000000,
-/*
-; Implicitly restore pointers on reselection, so a RETURN
-; will transfer control back to the right spot.
-    	CALL REL (dsa_code_restore_pointers)
-
-at 0x0000005a : */	0x88880000,0x00ffff68,
-/*
-    	RETURN
-
-at 0x0000005c : */	0x90080000,0x00000000,
-/*
-ENTRY dsa_zero
-dsa_zero:
-ENTRY dsa_code_template_end
-dsa_code_template_end:
-
-; Perform sanity check for dsa_fields_start == dsa_code_template_end - 
-; dsa_zero, puke.
-
-ABSOLUTE dsa_fields_start =  0	; Sanity marker
-				; 	pad 48 bytes (fix this RSN)
-ABSOLUTE dsa_next = 48		; len 4 Next DSA
- 				; del 4 Previous DSA address
-ABSOLUTE dsa_cmnd = 56		; len 4 Scsi_Cmnd * for this thread.
-ABSOLUTE dsa_select = 60	; len 4 Device ID, Period, Offset for 
-			 	;	table indirect select
-ABSOLUTE dsa_msgout = 64	; len 8 table indirect move parameter for 
-				;       select message
-ABSOLUTE dsa_cmdout = 72	; len 8 table indirect move parameter for 
-				;	command
-ABSOLUTE dsa_dataout = 80	; len 4 code pointer for dataout
-ABSOLUTE dsa_datain = 84	; len 4 code pointer for datain
-ABSOLUTE dsa_msgin = 88		; len 8 table indirect move for msgin
-ABSOLUTE dsa_status = 96 	; len 8 table indirect move for status byte
-ABSOLUTE dsa_msgout_other = 104	; len 8 table indirect for normal message out
-				; (Synchronous transfer negotiation, etc).
-ABSOLUTE dsa_end = 112
-
-ABSOLUTE schedule = 0 		; Array of JUMP dsa_begin or JUMP (next),
-				; terminated by a call to JUMP wait_reselect
-
-; Linked lists of DSA structures
-ABSOLUTE reconnect_dsa_head = 0	; Link list of DSAs which can reconnect
-ABSOLUTE addr_reconnect_dsa_head = 0 ; Address of variable containing
-				; address of reconnect_dsa_head
-
-; These select the source and destination of a MOVE MEMORY instruction
-ABSOLUTE dmode_memory_to_memory = 0x0
-ABSOLUTE dmode_memory_to_ncr = 0x0
-ABSOLUTE dmode_ncr_to_memory = 0x0
-
-ABSOLUTE addr_scratch = 0x0
-ABSOLUTE addr_temp = 0x0
-
-ABSOLUTE saved_dsa = 0x0
-ABSOLUTE emulfly = 0x0
-ABSOLUTE addr_dsa = 0x0
-
-
-
-; Interrupts - 
-; MSB indicates type
-; 0	handle error condition
-; 1 	handle message 
-; 2 	handle normal condition
-; 3	debugging interrupt
-; 4 	testing interrupt 
-; Next byte indicates specific error
-
-; XXX not yet implemented, I'm not sure if I want to - 
-; Next byte indicates the routine the error occurred in
-; The LSB indicates the specific place the error occurred
- 
-ABSOLUTE int_err_unexpected_phase = 0x00000000	; Unexpected phase encountered
-ABSOLUTE int_err_selected = 0x00010000		; SELECTED (nee RESELECTED)
-ABSOLUTE int_err_unexpected_reselect = 0x00020000 
-ABSOLUTE int_err_check_condition = 0x00030000	
-ABSOLUTE int_err_no_phase = 0x00040000
-ABSOLUTE int_msg_wdtr = 0x01000000		; WDTR message received
-ABSOLUTE int_msg_sdtr = 0x01010000		; SDTR received
-ABSOLUTE int_msg_1 = 0x01020000			; single byte special message
-						; received
-
-ABSOLUTE int_norm_select_complete = 0x02000000	; Select complete, reprogram
-						; registers.
-ABSOLUTE int_norm_reselect_complete = 0x02010000	; Nexus established
-ABSOLUTE int_norm_command_complete = 0x02020000 ; Command complete
-ABSOLUTE int_norm_disconnected = 0x02030000	; Disconnected 
-ABSOLUTE int_norm_aborted =0x02040000		; Aborted *dsa
-ABSOLUTE int_norm_reset = 0x02050000		; Generated BUS reset.
-ABSOLUTE int_norm_emulateintfly = 0x02060000	; 53C710 Emulated intfly
-ABSOLUTE int_debug_break = 0x03000000		; Break point
-
-ABSOLUTE int_debug_panic = 0x030b0000		; Panic driver
-
-
-ABSOLUTE int_test_1 = 0x04000000		; Test 1 complete
-ABSOLUTE int_test_2 = 0x04010000		; Test 2 complete
-ABSOLUTE int_test_3 = 0x04020000		; Test 3 complete
-
-
-; These should start with 0x05000000, with low bits incrementing for 
-; each one.
-
-
-						
-ABSOLUTE NCR53c7xx_msg_abort = 0	; Pointer to abort message
-ABSOLUTE NCR53c7xx_msg_reject = 0       ; Pointer to reject message
-ABSOLUTE NCR53c7xx_zero	= 0		; long with zero in it, use for source
-ABSOLUTE NCR53c7xx_sink = 0		; long to dump worthless data in
-ABSOLUTE NOP_insn = 0			; NOP instruction
-
-; Pointer to message, potentially multi-byte
-ABSOLUTE msg_buf = 0
-
-; Pointer to holding area for reselection information
-ABSOLUTE reselected_identify = 0
-ABSOLUTE reselected_tag = 0
-
-; Request sense command pointer, it's a 6 byte command, should
-; be constant for all commands since we always want 16 bytes of 
-; sense and we don't need to change any fields as we did under 
-; SCSI-I when we actually cared about the LUN field.
-;EXTERNAL NCR53c7xx_sense		; Request sense command
-
-
-; dsa_schedule  
-; PURPOSE : after a DISCONNECT message has been received, and pointers
-;	saved, insert the current DSA structure at the head of the 
-; 	disconnected queue and fall through to the scheduler.
-;
-; CALLS : OK
-;
-; INPUTS : dsa - current DSA structure, reconnect_dsa_head - list
-;	of disconnected commands
-;
-; MODIFIES : SCRATCH, reconnect_dsa_head
-; 
-; EXITS : always passes control to schedule
-
-ENTRY dsa_schedule
-dsa_schedule:
-
-
-
-
-;
-; Calculate the address of the next pointer within the DSA 
-; structure of the command that is currently disconnecting
-;
-
-    ; Read what should be the current DSA from memory - actual DSA
-    ; register is probably corrupt
-    MOVE MEMORY 4, saved_dsa, addr_scratch
-
-at 0x0000005e : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-
-    MOVE SCRATCH0 + dsa_next TO SCRATCH0
-
-at 0x00000061 : */	0x7e343000,0x00000000,
-/*
-    MOVE SCRATCH1 + 0 TO SCRATCH1 WITH CARRY
-
-at 0x00000063 : */	0x7f350000,0x00000000,
-/*
-    MOVE SCRATCH2 + 0 TO SCRATCH2 WITH CARRY
-
-at 0x00000065 : */	0x7f360000,0x00000000,
-/*
-    MOVE SCRATCH3 + 0 TO SCRATCH3 WITH CARRY
-
-at 0x00000067 : */	0x7f370000,0x00000000,
-/*
-
-; Point the next field of this DSA structure at the current disconnected 
-; list
-    
-    MOVE MEMORY 4, addr_scratch, dsa_schedule_insert + 8
-
-at 0x00000069 : */	0xc0000004,0x00000000,0x000001b8,
-/*
-    
-dsa_schedule_insert:
-    MOVE MEMORY 4, reconnect_dsa_head, 0 
-
-at 0x0000006c : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-; And update the head pointer.
-
-    ; Read what should be the current DSA from memory - actual DSA
-    ; register is probably corrupt
-    MOVE MEMORY 4, saved_dsa, addr_scratch
-
-at 0x0000006f : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-
-    
-    MOVE MEMORY 4, addr_scratch, reconnect_dsa_head
-
-at 0x00000072 : */	0xc0000004,0x00000000,0x00000000,
-/*
-    
-
-
-
-
-
-    CLEAR ACK
-
-at 0x00000075 : */	0x60000040,0x00000000,
-/*
-
-
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x00000077 : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-    WAIT DISCONNECT
-
-at 0x0000007a : */	0x48000000,0x00000000,
-/*
-
-
-
-
-
-
-    JUMP schedule
-
-at 0x0000007c : */	0x80080000,0x00000000,
-/*
-
-
-;
-; select
-;
-; PURPOSE : establish a nexus for the SCSI command referenced by DSA.
-;	On success, the current DSA structure is removed from the issue 
-;	queue.  Usually, this is entered as a fall-through from schedule,
-;	although the contingent allegiance handling code will write
-;	the select entry address to the DSP to restart a command as a 
-;	REQUEST SENSE.  A message is sent (usually IDENTIFY, although
-;	additional SDTR or WDTR messages may be sent).  COMMAND OUT
-;	is handled.
-;
-; INPUTS : DSA - SCSI command, issue_dsa_head
-;
-; CALLS : NOT OK
-;
-; MODIFIES : SCRATCH, issue_dsa_head
-;
-; EXITS : on reselection or selection, go to select_failed
-;	otherwise, RETURN so control is passed back to 
-;	dsa_begin.
-;
-
-ENTRY select
-select:
-
-
-
-
-
-
-
-
-    CLEAR TARGET
-
-at 0x0000007e : */	0x60000200,0x00000000,
-/*
-
-; XXX
-;
-; In effect, SELECTION operations are backgrounded, with execution
-; continuing until code which waits for REQ or a fatal interrupt is 
-; encountered.
-;
-; So, for more performance, we could overlap the code which removes 
-; the command from the NCRs issue queue with the selection, but 
-; at this point I don't want to deal with the error recovery.
-;
-
-
-
-    ; Enable selection timer
-
-
-
-    MOVE CTEST7 & 0xef TO CTEST7
-
-at 0x00000080 : */	0x7c1bef00,0x00000000,
-/*
-
-
-    SELECT ATN FROM dsa_select, select_failed
-
-at 0x00000082 : */	0x4300003c,0x00000828,
-/*
-    JUMP select_msgout, WHEN MSG_OUT
-
-at 0x00000084 : */	0x860b0000,0x00000218,
-/*
-ENTRY select_msgout
-select_msgout:
-
-    ; Disable selection timer
-    MOVE CTEST7 | 0x10 TO CTEST7
-
-at 0x00000086 : */	0x7a1b1000,0x00000000,
-/*
-
-    MOVE FROM dsa_msgout, WHEN MSG_OUT
-
-at 0x00000088 : */	0x1e000000,0x00000040,
-/*
-
-
-
-
-
-
-
-
-
-
-   RETURN
-
-at 0x0000008a : */	0x90080000,0x00000000,
-/*
-
-; 
-; select_done
-; 
-; PURPOSE: continue on to normal data transfer; called as the exit 
-;	point from dsa_begin.
-;
-; INPUTS: dsa
-;
-; CALLS: OK
-;
-;
-
-select_done:
-
-; NOTE DSA is corrupt when we arrive here!
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x0000008c : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-
-
-
-
-
-
-; After a successful selection, we should get either a CMD phase or 
-; some transfer request negotiation message.
-
-    JUMP cmdout, WHEN CMD
-
-at 0x0000008f : */	0x820b0000,0x0000025c,
-/*
-    INT int_err_unexpected_phase, WHEN NOT MSG_IN 
-
-at 0x00000091 : */	0x9f030000,0x00000000,
-/*
-
-select_msg_in:
-    CALL msg_in, WHEN MSG_IN
-
-at 0x00000093 : */	0x8f0b0000,0x0000041c,
-/*
-    JUMP select_msg_in, WHEN MSG_IN
-
-at 0x00000095 : */	0x870b0000,0x0000024c,
-/*
-
-cmdout:
-    INT int_err_unexpected_phase, WHEN NOT CMD
-
-at 0x00000097 : */	0x9a030000,0x00000000,
-/*
-
-
-
-ENTRY cmdout_cmdout
-cmdout_cmdout:
-
-    MOVE FROM dsa_cmdout, WHEN CMD
-
-at 0x00000099 : */	0x1a000000,0x00000048,
-/*
-
-
-
-
-;
-; data_transfer  
-; other_out
-; other_in
-; other_transfer
-;
-; PURPOSE : handle the main data transfer for a SCSI command in 
-;	several parts.  In the first part, data_transfer, DATA_IN
-;	and DATA_OUT phases are allowed, with the user provided
-;	code (usually dynamically generated based on the scatter/gather
-;	list associated with a SCSI command) called to handle these 
-;	phases.
-;
-;	After control has passed to one of the user provided 
-;	DATA_IN or DATA_OUT routines, back calls are made to 
-;	other_transfer_in or other_transfer_out to handle non-DATA IN
-;	and DATA OUT phases respectively, with the state of the active
-;	data pointer being preserved in TEMP.
-;
-;	On completion, the user code passes control to other_transfer
-;	which causes DATA_IN and DATA_OUT to result in unexpected_phase
-;	interrupts so that data overruns may be trapped.
-;
-; INPUTS : DSA - SCSI command
-;
-; CALLS : OK in data_transfer_start, not ok in other_out and other_in, ok in
-;	other_transfer
-;
-; MODIFIES : SCRATCH
-;
-; EXITS : if STATUS IN is detected, signifying command completion,
-;	the NCR jumps to command_complete.  If MSG IN occurs, a 
-;	CALL is made to msg_in.  Otherwise, other_transfer runs in 
-;	an infinite loop.
-;	
-
-ENTRY data_transfer
-data_transfer:
-    JUMP cmdout_cmdout, WHEN CMD
-
-at 0x0000009b : */	0x820b0000,0x00000264,
-/*
-    CALL msg_in, WHEN MSG_IN
-
-at 0x0000009d : */	0x8f0b0000,0x0000041c,
-/*
-    INT int_err_unexpected_phase, WHEN MSG_OUT
-
-at 0x0000009f : */	0x9e0b0000,0x00000000,
-/*
-    JUMP do_dataout, WHEN DATA_OUT
-
-at 0x000000a1 : */	0x800b0000,0x000002a4,
-/*
-    JUMP do_datain, WHEN DATA_IN
-
-at 0x000000a3 : */	0x810b0000,0x000002fc,
-/*
-    JUMP command_complete, WHEN STATUS
-
-at 0x000000a5 : */	0x830b0000,0x0000065c,
-/*
-    JUMP data_transfer
-
-at 0x000000a7 : */	0x80080000,0x0000026c,
-/*
-ENTRY end_data_transfer
-end_data_transfer:
-
-;
-; FIXME: On NCR53c700 and NCR53c700-66 chips, do_dataout/do_datain 
-; should be fixed up whenever the nexus changes so it can point to the 
-; correct routine for that command.
-;
-
-
-; Nasty jump to dsa->dataout
-do_dataout:
-
-    MOVE MEMORY 4, saved_dsa, addr_scratch
-
-at 0x000000a9 : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-
-    MOVE SCRATCH0 + dsa_dataout TO SCRATCH0	
-
-at 0x000000ac : */	0x7e345000,0x00000000,
-/*
-    MOVE SCRATCH1 + 0 TO SCRATCH1 WITH CARRY 
-
-at 0x000000ae : */	0x7f350000,0x00000000,
-/*
-    MOVE SCRATCH2 + 0 TO SCRATCH2 WITH CARRY 
-
-at 0x000000b0 : */	0x7f360000,0x00000000,
-/*
-    MOVE SCRATCH3 + 0 TO SCRATCH3 WITH CARRY 
-
-at 0x000000b2 : */	0x7f370000,0x00000000,
-/*
-    
-    MOVE MEMORY 4, addr_scratch, dataout_to_jump + 4
-
-at 0x000000b4 : */	0xc0000004,0x00000000,0x000002e0,
-/*
-    
-dataout_to_jump:
-    MOVE MEMORY 4, 0, dataout_jump + 4 
-
-at 0x000000b7 : */	0xc0000004,0x00000000,0x000002f8,
-/*
-
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x000000ba : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-dataout_jump:
-    JUMP 0
-
-at 0x000000bd : */	0x80080000,0x00000000,
-/*
-
-; Nasty jump to dsa->dsain
-do_datain:
-
-    MOVE MEMORY 4, saved_dsa, addr_scratch
-
-at 0x000000bf : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-
-    MOVE SCRATCH0 + dsa_datain TO SCRATCH0	
-
-at 0x000000c2 : */	0x7e345400,0x00000000,
-/*
-    MOVE SCRATCH1 + 0 TO SCRATCH1 WITH CARRY 
-
-at 0x000000c4 : */	0x7f350000,0x00000000,
-/*
-    MOVE SCRATCH2 + 0 TO SCRATCH2 WITH CARRY 
-
-at 0x000000c6 : */	0x7f360000,0x00000000,
-/*
-    MOVE SCRATCH3 + 0 TO SCRATCH3 WITH CARRY 
-
-at 0x000000c8 : */	0x7f370000,0x00000000,
-/*
-    
-    MOVE MEMORY 4, addr_scratch, datain_to_jump + 4
-
-at 0x000000ca : */	0xc0000004,0x00000000,0x00000338,
-/*
-    
-ENTRY datain_to_jump
-datain_to_jump:
-    MOVE MEMORY 4, 0, datain_jump + 4
-
-at 0x000000cd : */	0xc0000004,0x00000000,0x00000350,
-/*
-
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x000000d0 : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-
-
-datain_jump:
-    JUMP 0
-
-at 0x000000d3 : */	0x80080000,0x00000000,
-/*
-
-
-
-; Note that other_out and other_in loop until a non-data phase
-; is discovered, so we only execute return statements when we
-; can go on to the next data phase block move statement.
-
-ENTRY other_out
-other_out:
-
-
-
-    INT int_err_unexpected_phase, WHEN CMD
-
-at 0x000000d5 : */	0x9a0b0000,0x00000000,
-/*
-    JUMP msg_in_restart, WHEN MSG_IN 
-
-at 0x000000d7 : */	0x870b0000,0x000003fc,
-/*
-    INT int_err_unexpected_phase, WHEN MSG_OUT
-
-at 0x000000d9 : */	0x9e0b0000,0x00000000,
-/*
-    INT int_err_unexpected_phase, WHEN DATA_IN
-
-at 0x000000db : */	0x990b0000,0x00000000,
-/*
-    JUMP command_complete, WHEN STATUS
-
-at 0x000000dd : */	0x830b0000,0x0000065c,
-/*
-    JUMP other_out, WHEN NOT DATA_OUT
-
-at 0x000000df : */	0x80030000,0x00000354,
-/*
-
-; TEMP should be OK, as we got here from a call in the user dataout code.
-
-    RETURN
-
-at 0x000000e1 : */	0x90080000,0x00000000,
-/*
-
-ENTRY other_in
-other_in:
-
-
-
-    INT int_err_unexpected_phase, WHEN CMD
-
-at 0x000000e3 : */	0x9a0b0000,0x00000000,
-/*
-    JUMP msg_in_restart, WHEN MSG_IN 
-
-at 0x000000e5 : */	0x870b0000,0x000003fc,
-/*
-    INT int_err_unexpected_phase, WHEN MSG_OUT
-
-at 0x000000e7 : */	0x9e0b0000,0x00000000,
-/*
-    INT int_err_unexpected_phase, WHEN DATA_OUT
-
-at 0x000000e9 : */	0x980b0000,0x00000000,
-/*
-    JUMP command_complete, WHEN STATUS
-
-at 0x000000eb : */	0x830b0000,0x0000065c,
-/*
-    JUMP other_in, WHEN NOT DATA_IN
-
-at 0x000000ed : */	0x81030000,0x0000038c,
-/*
-
-; TEMP should be OK, as we got here from a call in the user datain code.
-
-    RETURN
-
-at 0x000000ef : */	0x90080000,0x00000000,
-/*
-
-
-ENTRY other_transfer
-other_transfer:
-    INT int_err_unexpected_phase, WHEN CMD
-
-at 0x000000f1 : */	0x9a0b0000,0x00000000,
-/*
-    CALL msg_in, WHEN MSG_IN
-
-at 0x000000f3 : */	0x8f0b0000,0x0000041c,
-/*
-    INT int_err_unexpected_phase, WHEN MSG_OUT
-
-at 0x000000f5 : */	0x9e0b0000,0x00000000,
-/*
-    INT int_err_unexpected_phase, WHEN DATA_OUT
-
-at 0x000000f7 : */	0x980b0000,0x00000000,
-/*
-    INT int_err_unexpected_phase, WHEN DATA_IN
-
-at 0x000000f9 : */	0x990b0000,0x00000000,
-/*
-    JUMP command_complete, WHEN STATUS
-
-at 0x000000fb : */	0x830b0000,0x0000065c,
-/*
-    JUMP other_transfer
-
-at 0x000000fd : */	0x80080000,0x000003c4,
-/*
-
-;
-; msg_in_restart
-; msg_in
-; munge_msg
-;
-; PURPOSE : process messages from a target.  msg_in is called when the 
-;	caller hasn't read the first byte of the message.  munge_message
-;	is called when the caller has read the first byte of the message,
-;	and left it in SFBR.  msg_in_restart is called when the caller 
-;	hasn't read the first byte of the message, and wishes RETURN
-;	to transfer control back to the address of the conditional
-;	CALL instruction rather than to the instruction after it.
-;
-;	Various int_* interrupts are generated when the host system
-;	needs to intervene, as is the case with SDTR, WDTR, and
-;	INITIATE RECOVERY messages.
-;
-;	When the host system handles one of these interrupts,
-;	it can respond by reentering at reject_message, 
-;	which rejects the message and returns control to
-;	the caller of msg_in or munge_msg, accept_message
-;	which clears ACK and returns control, or reply_message
-;	which sends the message pointed to by the DSA 
-;	msgout_other table indirect field.
-;
-;	DISCONNECT messages are handled by moving the command
-;	to the reconnect_dsa_queue.
-
-; NOTE: DSA should be valid when we get here - we cannot save both it
-;	and TEMP in this routine.
-
-;
-; INPUTS : DSA - SCSI COMMAND, SFBR - first byte of message (munge_msg
-;	only)
-;
-; CALLS : NO.  The TEMP register isn't backed up to allow nested calls.
-;
-; MODIFIES : SCRATCH, DSA on DISCONNECT
-;
-; EXITS : On receipt of SAVE DATA POINTER, RESTORE POINTERS,
-;	and normal return from message handlers running under
-;	Linux, control is returned to the caller.  Receipt
-;	of DISCONNECT messages pass control to dsa_schedule.
-;
-ENTRY msg_in_restart
-msg_in_restart:
-; XXX - hackish
-;
-; Since it's easier to debug changes to the statically 
-; compiled code, rather than the dynamically generated 
-; stuff, such as
-;
-; 	MOVE x, y, WHEN data_phase
-; 	CALL other_z, WHEN NOT data_phase
-; 	MOVE x, y, WHEN data_phase
-;
-; I'd like to have certain routines (notably the message handler)
-; restart on the conditional call rather than the next instruction.
-;
-; So, subtract 8 from the return address
-
-    MOVE TEMP0 + 0xf8 TO TEMP0
-
-at 0x000000ff : */	0x7e1cf800,0x00000000,
-/*
-    MOVE TEMP1 + 0xff TO TEMP1 WITH CARRY
-
-at 0x00000101 : */	0x7f1dff00,0x00000000,
-/*
-    MOVE TEMP2 + 0xff TO TEMP2 WITH CARRY
-
-at 0x00000103 : */	0x7f1eff00,0x00000000,
-/*
-    MOVE TEMP3 + 0xff TO TEMP3 WITH CARRY
-
-at 0x00000105 : */	0x7f1fff00,0x00000000,
-/*
-
-ENTRY msg_in
-msg_in:
-    MOVE 1, msg_buf, WHEN MSG_IN
-
-at 0x00000107 : */	0x0f000001,0x00000000,
-/*
-
-munge_msg:
-    JUMP munge_extended, IF 0x01		; EXTENDED MESSAGE
-
-at 0x00000109 : */	0x800c0001,0x00000574,
-/*
-    JUMP munge_2, IF 0x20, AND MASK 0xdf	; two byte message
-
-at 0x0000010b : */	0x800cdf20,0x00000464,
-/*
-;
-; XXX - I've seen a handful of broken SCSI devices which fail to issue
-; 	a SAVE POINTERS message before disconnecting in the middle of 
-; 	a transfer, assuming that the DATA POINTER will be implicitly 
-; 	restored.  
-;
-; Historically, I've often done an implicit save when the DISCONNECT
-; message is processed.  We may want to consider having the option of 
-; doing that here. 
-;
-    JUMP munge_save_data_pointer, IF 0x02	; SAVE DATA POINTER
-
-at 0x0000010d : */	0x800c0002,0x0000046c,
-/*
-    JUMP munge_restore_pointers, IF 0x03	; RESTORE POINTERS 
-
-at 0x0000010f : */	0x800c0003,0x00000518,
-/*
-    JUMP munge_disconnect, IF 0x04		; DISCONNECT
-
-at 0x00000111 : */	0x800c0004,0x0000056c,
-/*
-    INT int_msg_1, IF 0x07			; MESSAGE REJECT
-
-at 0x00000113 : */	0x980c0007,0x01020000,
-/*
-    INT int_msg_1, IF 0x0f			; INITIATE RECOVERY
-
-at 0x00000115 : */	0x980c000f,0x01020000,
-/*
-
-
-
-    JUMP reject_message
-
-at 0x00000117 : */	0x80080000,0x00000604,
-/*
-
-munge_2:
-    JUMP reject_message
-
-at 0x00000119 : */	0x80080000,0x00000604,
-/*
-;
-; The SCSI standard allows targets to recover from transient 
-; error conditions by backing up the data pointer with a 
-; RESTORE POINTERS message.  
-;	
-; So, we must save and restore the _residual_ code as well as 
-; the current instruction pointer.  Because of this messiness,
-; it is simpler to put dynamic code in the dsa for this and to
-; just do a simple jump down there. 
-;
-
-munge_save_data_pointer:
-
-    ; We have something in TEMP here, so first we must save that
-    MOVE TEMP0 TO SFBR
-
-at 0x0000011b : */	0x721c0000,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH0
-
-at 0x0000011d : */	0x6a340000,0x00000000,
-/*
-    MOVE TEMP1 TO SFBR
-
-at 0x0000011f : */	0x721d0000,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH1
-
-at 0x00000121 : */	0x6a350000,0x00000000,
-/*
-    MOVE TEMP2 TO SFBR
-
-at 0x00000123 : */	0x721e0000,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH2
-
-at 0x00000125 : */	0x6a360000,0x00000000,
-/*
-    MOVE TEMP3 TO SFBR
-
-at 0x00000127 : */	0x721f0000,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH3
-
-at 0x00000129 : */	0x6a370000,0x00000000,
-/*
-    MOVE MEMORY 4, addr_scratch, jump_temp + 4
-
-at 0x0000012b : */	0xc0000004,0x00000000,0x000009c8,
-/*
-    ; Now restore DSA
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x0000012e : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-    MOVE DSA0 + dsa_save_data_pointer TO SFBR
-
-at 0x00000131 : */	0x76100000,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH0
-
-at 0x00000133 : */	0x6a340000,0x00000000,
-/*
-    MOVE DSA1 + 0xff TO SFBR WITH CARRY
-
-at 0x00000135 : */	0x7711ff00,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH1
-
-at 0x00000137 : */	0x6a350000,0x00000000,
-/*
-    MOVE DSA2 + 0xff TO SFBR WITH CARRY 
-
-at 0x00000139 : */	0x7712ff00,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH2
-
-at 0x0000013b : */	0x6a360000,0x00000000,
-/*
-    MOVE DSA3 + 0xff TO SFBR WITH CARRY
-
-at 0x0000013d : */	0x7713ff00,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH3
-
-at 0x0000013f : */	0x6a370000,0x00000000,
-/*
-
-    
-    MOVE MEMORY 4, addr_scratch, jump_dsa_save + 4
-
-at 0x00000141 : */	0xc0000004,0x00000000,0x00000514,
-/*
-    
-jump_dsa_save:
-    JUMP 0
-
-at 0x00000144 : */	0x80080000,0x00000000,
-/*
-
-munge_restore_pointers:
-
-    ; The code at dsa_restore_pointers will RETURN, but we don't care
-    ; about TEMP here, as it will overwrite it anyway.
-
-    MOVE DSA0 + dsa_restore_pointers TO SFBR
-
-at 0x00000146 : */	0x76100000,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH0
-
-at 0x00000148 : */	0x6a340000,0x00000000,
-/*
-    MOVE DSA1 + 0xff TO SFBR WITH CARRY
-
-at 0x0000014a : */	0x7711ff00,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH1
-
-at 0x0000014c : */	0x6a350000,0x00000000,
-/*
-    MOVE DSA2 + 0xff TO SFBR WITH CARRY
-
-at 0x0000014e : */	0x7712ff00,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH2
-
-at 0x00000150 : */	0x6a360000,0x00000000,
-/*
-    MOVE DSA3 + 0xff TO SFBR WITH CARRY
-
-at 0x00000152 : */	0x7713ff00,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH3
-
-at 0x00000154 : */	0x6a370000,0x00000000,
-/*
-
-    
-    MOVE MEMORY 4, addr_scratch, jump_dsa_restore + 4
-
-at 0x00000156 : */	0xc0000004,0x00000000,0x00000568,
-/*
-    
-jump_dsa_restore:
-    JUMP 0
-
-at 0x00000159 : */	0x80080000,0x00000000,
-/*
-
-
-munge_disconnect:
-
-
-
-
-
-
-
-
-
- 
-
-
-
-
-
-
-
-
-
-
-    JUMP dsa_schedule
-
-at 0x0000015b : */	0x80080000,0x00000178,
-/*
-
-
-
-
-
-munge_extended:
-    CLEAR ACK
-
-at 0x0000015d : */	0x60000040,0x00000000,
-/*
-    INT int_err_unexpected_phase, WHEN NOT MSG_IN
-
-at 0x0000015f : */	0x9f030000,0x00000000,
-/*
-    MOVE 1, msg_buf + 1, WHEN MSG_IN
-
-at 0x00000161 : */	0x0f000001,0x00000001,
-/*
-    JUMP munge_extended_2, IF 0x02
-
-at 0x00000163 : */	0x800c0002,0x000005a4,
-/*
-    JUMP munge_extended_3, IF 0x03 
-
-at 0x00000165 : */	0x800c0003,0x000005d4,
-/*
-    JUMP reject_message
-
-at 0x00000167 : */	0x80080000,0x00000604,
-/*
-
-munge_extended_2:
-    CLEAR ACK
-
-at 0x00000169 : */	0x60000040,0x00000000,
-/*
-    MOVE 1, msg_buf + 2, WHEN MSG_IN
-
-at 0x0000016b : */	0x0f000001,0x00000002,
-/*
-    JUMP reject_message, IF NOT 0x02	; Must be WDTR
-
-at 0x0000016d : */	0x80040002,0x00000604,
-/*
-    CLEAR ACK
-
-at 0x0000016f : */	0x60000040,0x00000000,
-/*
-    MOVE 1, msg_buf + 3, WHEN MSG_IN
-
-at 0x00000171 : */	0x0f000001,0x00000003,
-/*
-    INT int_msg_wdtr
-
-at 0x00000173 : */	0x98080000,0x01000000,
-/*
-
-munge_extended_3:
-    CLEAR ACK
-
-at 0x00000175 : */	0x60000040,0x00000000,
-/*
-    MOVE 1, msg_buf + 2, WHEN MSG_IN
-
-at 0x00000177 : */	0x0f000001,0x00000002,
-/*
-    JUMP reject_message, IF NOT 0x01	; Must be SDTR
-
-at 0x00000179 : */	0x80040001,0x00000604,
-/*
-    CLEAR ACK
-
-at 0x0000017b : */	0x60000040,0x00000000,
-/*
-    MOVE 2, msg_buf + 3, WHEN MSG_IN
-
-at 0x0000017d : */	0x0f000002,0x00000003,
-/*
-    INT int_msg_sdtr
-
-at 0x0000017f : */	0x98080000,0x01010000,
-/*
-
-ENTRY reject_message
-reject_message:
-    SET ATN
-
-at 0x00000181 : */	0x58000008,0x00000000,
-/*
-    CLEAR ACK
-
-at 0x00000183 : */	0x60000040,0x00000000,
-/*
-    MOVE 1, NCR53c7xx_msg_reject, WHEN MSG_OUT
-
-at 0x00000185 : */	0x0e000001,0x00000000,
-/*
-    RETURN
-
-at 0x00000187 : */	0x90080000,0x00000000,
-/*
-
-ENTRY accept_message
-accept_message:
-    CLEAR ATN
-
-at 0x00000189 : */	0x60000008,0x00000000,
-/*
-    CLEAR ACK
-
-at 0x0000018b : */	0x60000040,0x00000000,
-/*
-    RETURN
-
-at 0x0000018d : */	0x90080000,0x00000000,
-/*
-
-ENTRY respond_message
-respond_message:
-    SET ATN
-
-at 0x0000018f : */	0x58000008,0x00000000,
-/*
-    CLEAR ACK
-
-at 0x00000191 : */	0x60000040,0x00000000,
-/*
-    MOVE FROM dsa_msgout_other, WHEN MSG_OUT
-
-at 0x00000193 : */	0x1e000000,0x00000068,
-/*
-    RETURN
-
-at 0x00000195 : */	0x90080000,0x00000000,
-/*
-
-;
-; command_complete
-;
-; PURPOSE : handle command termination when STATUS IN is detected by reading
-;	a status byte followed by a command termination message. 
-;
-;	Normal termination results in an INTFLY instruction, and 
-;	the host system can pick out which command terminated by 
-;	examining the MESSAGE and STATUS buffers of all currently 
-;	executing commands;
-;
-;	Abnormal (CHECK_CONDITION) termination results in an
-;	int_err_check_condition interrupt so that a REQUEST SENSE
-;	command can be issued out-of-order so that no other command
-;	clears the contingent allegiance condition.
-;	
-;
-; INPUTS : DSA - command	
-;
-; CALLS : OK
-;
-; EXITS : On successful termination, control is passed to schedule.
-;	On abnormal termination, the user will usually modify the 
-;	DSA fields and corresponding buffers and return control
-;	to select.
-;
-
-ENTRY command_complete
-command_complete:
-    MOVE FROM dsa_status, WHEN STATUS
-
-at 0x00000197 : */	0x1b000000,0x00000060,
-/*
-
-    MOVE SFBR TO SCRATCH0		; Save status
-
-at 0x00000199 : */	0x6a340000,0x00000000,
-/*
-
-ENTRY command_complete_msgin
-command_complete_msgin:
-    MOVE FROM dsa_msgin, WHEN MSG_IN
-
-at 0x0000019b : */	0x1f000000,0x00000058,
-/*
-; Indicate that we should be expecting a disconnect
-
-
-
-    ; Above code cleared the Unexpected Disconnect bit, what do we do?
-
-    CLEAR ACK
-
-at 0x0000019d : */	0x60000040,0x00000000,
-/*
-
-    WAIT DISCONNECT
-
-at 0x0000019f : */	0x48000000,0x00000000,
-/*
-
-;
-; The SCSI specification states that when a UNIT ATTENTION condition
-; is pending, as indicated by a CHECK CONDITION status message,
-; the target shall revert to asynchronous transfers.  Since
-; synchronous transfers parameters are maintained on a per INITIATOR/TARGET 
-; basis, and returning control to our scheduler could work on a command
-; running on another lun on that target using the old parameters, we must
-; interrupt the host processor to get them changed, or change them ourselves.
-;
-; Once SCSI-II tagged queueing is implemented, things will be even more
-; hairy, since contingent allegiance conditions exist on a per-target/lun
-; basis, and issuing a new command with a different tag would clear it.
-; In these cases, we must interrupt the host processor to get a request 
-; added to the HEAD of the queue with the request sense command, or we
-; must automatically issue the request sense command.
-
-
-
-
-
-
-
-    INT int_norm_emulateintfly
-
-at 0x000001a1 : */	0x98080000,0x02060000,
-/*
-
-
-
-
-
-
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x000001a3 : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-
-
-
-    JUMP schedule
-
-at 0x000001a6 : */	0x80080000,0x00000000,
-/*
-command_failed:
-    INT int_err_check_condition
-
-at 0x000001a8 : */	0x98080000,0x00030000,
-/*
-
-
-
-
-;
-; wait_reselect
-;
-; PURPOSE : This is essentially the idle routine, where control lands
-;	when there are no new processes to schedule.  wait_reselect
-;	waits for reselection, selection, and new commands.
-;
-;	When a successful reselection occurs, with the aid 
-;	of fixed up code in each DSA, wait_reselect walks the 
-;	reconnect_dsa_queue, asking each dsa if the target ID
-;	and LUN match its.
-;
-;	If a match is found, a call is made back to reselected_ok,
-;	which through the miracles of self modifying code, extracts
-;	the found DSA from the reconnect_dsa_queue and then 
-;	returns control to the DSAs thread of execution.
-;
-; INPUTS : NONE
-;
-; CALLS : OK
-;
-; MODIFIES : DSA,
-;
-; EXITS : On successful reselection, control is returned to the 
-;	DSA which called reselected_ok.  If the WAIT RESELECT
-;	was interrupted by a new commands arrival signaled by 
-;	SIG_P, control is passed to schedule.  If the NCR is 
-;	selected, the host system is interrupted with an 
-;	int_err_selected which is usually responded to by
-;	setting DSP to the target_abort address.
-
-ENTRY wait_reselect
-wait_reselect:
-
-
-
-
-
-
-    WAIT RESELECT wait_reselect_failed
-
-at 0x000001aa : */	0x50000000,0x00000800,
-/*
-
-reselected:
-
-
-
-    CLEAR TARGET
-
-at 0x000001ac : */	0x60000200,0x00000000,
-/*
-    
-    ; Read all data needed to reestablish the nexus - 
-    MOVE 1, reselected_identify, WHEN MSG_IN
-
-at 0x000001ae : */	0x0f000001,0x00000000,
-/*
-    ; We used to CLEAR ACK here.
-
-
-
-
-
-    ; Point DSA at the current head of the disconnected queue.
-    
-    MOVE MEMORY 4, reconnect_dsa_head, addr_scratch
-
-at 0x000001b0 : */	0xc0000004,0x00000000,0x00000000,
-/*
-    
-
-    MOVE MEMORY 4, addr_scratch, saved_dsa
-
-at 0x000001b3 : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-
-
-    ; Fix the update-next pointer so that the reconnect_dsa_head
-    ; pointer is the one that will be updated if this DSA is a hit 
-    ; and we remove it from the queue.
-
-    MOVE MEMORY 4, addr_reconnect_dsa_head, reselected_ok_patch + 8
-
-at 0x000001b6 : */	0xc0000004,0x00000000,0x000007ec,
-/*
-
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x000001b9 : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-
-ENTRY reselected_check_next
-reselected_check_next:
-
-
-
-    ; Check for a NULL pointer.
-    MOVE DSA0 TO SFBR
-
-at 0x000001bc : */	0x72100000,0x00000000,
-/*
-    JUMP reselected_not_end, IF NOT 0
-
-at 0x000001be : */	0x80040000,0x00000738,
-/*
-    MOVE DSA1 TO SFBR
-
-at 0x000001c0 : */	0x72110000,0x00000000,
-/*
-    JUMP reselected_not_end, IF NOT 0
-
-at 0x000001c2 : */	0x80040000,0x00000738,
-/*
-    MOVE DSA2 TO SFBR
-
-at 0x000001c4 : */	0x72120000,0x00000000,
-/*
-    JUMP reselected_not_end, IF NOT 0
-
-at 0x000001c6 : */	0x80040000,0x00000738,
-/*
-    MOVE DSA3 TO SFBR
-
-at 0x000001c8 : */	0x72130000,0x00000000,
-/*
-    JUMP reselected_not_end, IF NOT 0
-
-at 0x000001ca : */	0x80040000,0x00000738,
-/*
-    INT int_err_unexpected_reselect
-
-at 0x000001cc : */	0x98080000,0x00020000,
-/*
-
-reselected_not_end:
-    ;
-    ; XXX the ALU is only eight bits wide, and the assembler
-    ; wont do the dirt work for us.  As long as dsa_check_reselect
-    ; is negative, we need to sign extend with 1 bits to the full
-    ; 32 bit width of the address.
-    ;
-    ; A potential work around would be to have a known alignment 
-    ; of the DSA structure such that the base address plus 
-    ; dsa_check_reselect doesn't require carrying from bytes 
-    ; higher than the LSB.
-    ;
-
-    MOVE DSA0 TO SFBR
-
-at 0x000001ce : */	0x72100000,0x00000000,
-/*
-    MOVE SFBR + dsa_check_reselect TO SCRATCH0
-
-at 0x000001d0 : */	0x6e340000,0x00000000,
-/*
-    MOVE DSA1 TO SFBR
-
-at 0x000001d2 : */	0x72110000,0x00000000,
-/*
-    MOVE SFBR + 0xff TO SCRATCH1 WITH CARRY
-
-at 0x000001d4 : */	0x6f35ff00,0x00000000,
-/*
-    MOVE DSA2 TO SFBR
-
-at 0x000001d6 : */	0x72120000,0x00000000,
-/*
-    MOVE SFBR + 0xff TO SCRATCH2 WITH CARRY
-
-at 0x000001d8 : */	0x6f36ff00,0x00000000,
-/*
-    MOVE DSA3 TO SFBR
-
-at 0x000001da : */	0x72130000,0x00000000,
-/*
-    MOVE SFBR + 0xff TO SCRATCH3 WITH CARRY
-
-at 0x000001dc : */	0x6f37ff00,0x00000000,
-/*
-
-    
-    MOVE MEMORY 4, addr_scratch, reselected_check + 4
-
-at 0x000001de : */	0xc0000004,0x00000000,0x00000794,
-/*
-    
-
-    ; Time to correct DSA following memory move
-    MOVE MEMORY 4, saved_dsa, addr_dsa
-
-at 0x000001e1 : */	0xc0000004,0x00000000,0x00000000,
-/*
-
-reselected_check:
-    JUMP 0
-
-at 0x000001e4 : */	0x80080000,0x00000000,
-/*
-
-
-;
-;
-
-; We have problems here - the memory move corrupts TEMP and DSA.  This
-; routine is called from DSA code, and patched from many places.  Scratch
-; is probably free when it is called.
-; We have to:
-;   copy temp to scratch, one byte at a time
-;   write scratch to patch a jump in place of the return
-;   do the move memory
-;   jump to the patched in return address
-; DSA is corrupt when we get here, and can be left corrupt
-
-ENTRY reselected_ok
-reselected_ok:
-    MOVE TEMP0 TO SFBR
-
-at 0x000001e6 : */	0x721c0000,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH0
-
-at 0x000001e8 : */	0x6a340000,0x00000000,
-/*
-    MOVE TEMP1 TO SFBR
-
-at 0x000001ea : */	0x721d0000,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH1
-
-at 0x000001ec : */	0x6a350000,0x00000000,
-/*
-    MOVE TEMP2 TO SFBR
-
-at 0x000001ee : */	0x721e0000,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH2
-
-at 0x000001f0 : */	0x6a360000,0x00000000,
-/*
-    MOVE TEMP3 TO SFBR
-
-at 0x000001f2 : */	0x721f0000,0x00000000,
-/*
-    MOVE SFBR TO SCRATCH3
-
-at 0x000001f4 : */	0x6a370000,0x00000000,
-/*
-    MOVE MEMORY 4, addr_scratch, reselected_ok_jump + 4
-
-at 0x000001f6 : */	0xc0000004,0x00000000,0x000007f4,
-/*
-reselected_ok_patch:
-    MOVE MEMORY 4, 0, 0
-
-at 0x000001f9 : */	0xc0000004,0x00000000,0x00000000,
-/*
-reselected_ok_jump:
-    JUMP 0
-
-at 0x000001fc : */	0x80080000,0x00000000,
-/*
-
-
-
-
-
-selected:
-    INT int_err_selected;
-
-at 0x000001fe : */	0x98080000,0x00010000,
-/*
-
-;
-; A select or reselect failure can be caused by one of two conditions : 
-; 1.  SIG_P was set.  This will be the case if the user has written
-;	a new value to a previously NULL head of the issue queue.
-;
-; 2.  The NCR53c810 was selected or reselected by another device.
-;
-; 3.  The bus was already busy since we were selected or reselected
-;	before starting the command.
-
-wait_reselect_failed:
-
-
-
-; Check selected bit.  
-
-    ; Must work out how to tell if we are selected....
-
-
-
-
-; Reading CTEST2 clears the SIG_P bit in the ISTAT register.
-    MOVE CTEST2 & 0x40 TO SFBR	
-
-at 0x00000200 : */	0x74164000,0x00000000,
-/*
-    JUMP schedule, IF 0x40
-
-at 0x00000202 : */	0x800c0040,0x00000000,
-/*
-; Check connected bit.  
-; FIXME: this needs to change if we support target mode
-    MOVE ISTAT & 0x08 TO SFBR
-
-at 0x00000204 : */	0x74210800,0x00000000,
-/*
-    JUMP reselected, IF 0x08
-
-at 0x00000206 : */	0x800c0008,0x000006b0,
-/*
-; FIXME : Something bogus happened, and we shouldn't fail silently.
-
-
-
-    INT int_debug_panic
-
-at 0x00000208 : */	0x98080000,0x030b0000,
-/*
-
-
-
-select_failed:
-
-    ; Disable selection timer
-    MOVE CTEST7 | 0x10 TO CTEST7
-
-at 0x0000020a : */	0x7a1b1000,0x00000000,
-/*
-
-
-
-
-; Otherwise, mask the selected and reselected bits off SIST0
-
-    ; Let's assume we don't get selected for now
-    MOVE SSTAT0 & 0x10 TO SFBR
-
-at 0x0000020c : */	0x740d1000,0x00000000,
-/*
-
-
-
-
-    JUMP reselected, IF 0x10 
-
-at 0x0000020e : */	0x800c0010,0x000006b0,
-/*
-; If SIGP is set, the user just gave us another command, and
-; we should restart or return to the scheduler.
-; Reading CTEST2 clears the SIG_P bit in the ISTAT register.
-    MOVE CTEST2 & 0x40 TO SFBR	
-
-at 0x00000210 : */	0x74164000,0x00000000,
-/*
-    JUMP select, IF 0x40
-
-at 0x00000212 : */	0x800c0040,0x000001f8,
-/*
-; Check connected bit.  
-; FIXME: this needs to change if we support target mode
-; FIXME: is this really necessary? 
-    MOVE ISTAT & 0x08 TO SFBR
-
-at 0x00000214 : */	0x74210800,0x00000000,
-/*
-    JUMP reselected, IF 0x08
-
-at 0x00000216 : */	0x800c0008,0x000006b0,
-/*
-; FIXME : Something bogus happened, and we shouldn't fail silently.
-
-
-
-    INT int_debug_panic
-
-at 0x00000218 : */	0x98080000,0x030b0000,
-/*
-
-
-;
-; test_1
-; test_2
-;
-; PURPOSE : run some verification tests on the NCR.  test_1
-;	copies test_src to test_dest and interrupts the host
-;	processor, testing for cache coherency and interrupt
-; 	problems in the processes.
-;
-;	test_2 runs a command with offsets relative to the 
-;	DSA on entry, and is useful for miscellaneous experimentation.
-;
-
-; Verify that interrupts are working correctly and that we don't 
-; have a cache invalidation problem.
-
-ABSOLUTE test_src = 0, test_dest = 0
-ENTRY test_1
-test_1:
-    MOVE MEMORY 4, test_src, test_dest
-
-at 0x0000021a : */	0xc0000004,0x00000000,0x00000000,
-/*
-    INT int_test_1
-
-at 0x0000021d : */	0x98080000,0x04000000,
-/*
-
-;
-; Run arbitrary commands, with test code establishing a DSA
-;
- 
-ENTRY test_2
-test_2:
-    CLEAR TARGET
-
-at 0x0000021f : */	0x60000200,0x00000000,
-/*
-
-    ; Enable selection timer
-
-
-
-    MOVE CTEST7 & 0xef TO CTEST7
-
-at 0x00000221 : */	0x7c1bef00,0x00000000,
-/*
-
-
-    SELECT ATN FROM 0, test_2_fail
-
-at 0x00000223 : */	0x43000000,0x000008dc,
-/*
-    JUMP test_2_msgout, WHEN MSG_OUT
-
-at 0x00000225 : */	0x860b0000,0x0000089c,
-/*
-ENTRY test_2_msgout
-test_2_msgout:
-
-    ; Disable selection timer
-    MOVE CTEST7 | 0x10 TO CTEST7
-
-at 0x00000227 : */	0x7a1b1000,0x00000000,
-/*
-
-    MOVE FROM 8, WHEN MSG_OUT
-
-at 0x00000229 : */	0x1e000000,0x00000008,
-/*
-    MOVE FROM 16, WHEN CMD 
-
-at 0x0000022b : */	0x1a000000,0x00000010,
-/*
-    MOVE FROM 24, WHEN DATA_IN
-
-at 0x0000022d : */	0x19000000,0x00000018,
-/*
-    MOVE FROM 32, WHEN STATUS
-
-at 0x0000022f : */	0x1b000000,0x00000020,
-/*
-    MOVE FROM 40, WHEN MSG_IN
-
-at 0x00000231 : */	0x1f000000,0x00000028,
-/*
-
-
-
-    CLEAR ACK
-
-at 0x00000233 : */	0x60000040,0x00000000,
-/*
-    WAIT DISCONNECT
-
-at 0x00000235 : */	0x48000000,0x00000000,
-/*
-test_2_fail:
-
-    ; Disable selection timer
-    MOVE CTEST7 | 0x10 TO CTEST7
-
-at 0x00000237 : */	0x7a1b1000,0x00000000,
-/*
-
-    INT int_test_2
-
-at 0x00000239 : */	0x98080000,0x04010000,
-/*
-
-ENTRY debug_break
-debug_break:
-    INT int_debug_break
-
-at 0x0000023b : */	0x98080000,0x03000000,
-/*
-
-;
-; initiator_abort
-; target_abort
-;
-; PURPOSE : Abort the currently established nexus from with initiator
-;	or target mode.
-;
-;  
-
-ENTRY target_abort
-target_abort:
-    SET TARGET
-
-at 0x0000023d : */	0x58000200,0x00000000,
-/*
-    DISCONNECT
-
-at 0x0000023f : */	0x48000000,0x00000000,
-/*
-    CLEAR TARGET
-
-at 0x00000241 : */	0x60000200,0x00000000,
-/*
-    JUMP schedule
-
-at 0x00000243 : */	0x80080000,0x00000000,
-/*
-    
-ENTRY initiator_abort
-initiator_abort:
-    SET ATN
-
-at 0x00000245 : */	0x58000008,0x00000000,
-/*
-;
-; The SCSI-I specification says that targets may go into MSG out at 
-; their leisure upon receipt of the ATN single.  On all versions of the 
-; specification, we can't change phases until REQ transitions true->false, 
-; so we need to sink/source one byte of data to allow the transition.
-;
-; For the sake of safety, we'll only source one byte of data in all 
-; cases, but to accommodate the SCSI-I dain bramage, we'll sink an  
-; arbitrary number of bytes.
-    JUMP spew_cmd, WHEN CMD
-
-at 0x00000247 : */	0x820b0000,0x0000094c,
-/*
-    JUMP eat_msgin, WHEN MSG_IN
-
-at 0x00000249 : */	0x870b0000,0x0000095c,
-/*
-    JUMP eat_datain, WHEN DATA_IN
-
-at 0x0000024b : */	0x810b0000,0x0000098c,
-/*
-    JUMP eat_status, WHEN STATUS
-
-at 0x0000024d : */	0x830b0000,0x00000974,
-/*
-    JUMP spew_dataout, WHEN DATA_OUT
-
-at 0x0000024f : */	0x800b0000,0x000009a4,
-/*
-    JUMP sated
-
-at 0x00000251 : */	0x80080000,0x000009ac,
-/*
-spew_cmd:
-    MOVE 1, NCR53c7xx_zero, WHEN CMD
-
-at 0x00000253 : */	0x0a000001,0x00000000,
-/*
-    JUMP sated
-
-at 0x00000255 : */	0x80080000,0x000009ac,
-/*
-eat_msgin:
-    MOVE 1, NCR53c7xx_sink, WHEN MSG_IN
-
-at 0x00000257 : */	0x0f000001,0x00000000,
-/*
-    JUMP eat_msgin, WHEN MSG_IN
-
-at 0x00000259 : */	0x870b0000,0x0000095c,
-/*
-    JUMP sated
-
-at 0x0000025b : */	0x80080000,0x000009ac,
-/*
-eat_status:
-    MOVE 1, NCR53c7xx_sink, WHEN STATUS
-
-at 0x0000025d : */	0x0b000001,0x00000000,
-/*
-    JUMP eat_status, WHEN STATUS
-
-at 0x0000025f : */	0x830b0000,0x00000974,
-/*
-    JUMP sated
-
-at 0x00000261 : */	0x80080000,0x000009ac,
-/*
-eat_datain:
-    MOVE 1, NCR53c7xx_sink, WHEN DATA_IN
-
-at 0x00000263 : */	0x09000001,0x00000000,
-/*
-    JUMP eat_datain, WHEN DATA_IN
-
-at 0x00000265 : */	0x810b0000,0x0000098c,
-/*
-    JUMP sated
-
-at 0x00000267 : */	0x80080000,0x000009ac,
-/*
-spew_dataout:
-    MOVE 1, NCR53c7xx_zero, WHEN DATA_OUT
-
-at 0x00000269 : */	0x08000001,0x00000000,
-/*
-sated:
-
-
-
-    MOVE 1, NCR53c7xx_msg_abort, WHEN MSG_OUT
-
-at 0x0000026b : */	0x0e000001,0x00000000,
-/*
-    WAIT DISCONNECT
-
-at 0x0000026d : */	0x48000000,0x00000000,
-/*
-    INT int_norm_aborted
-
-at 0x0000026f : */	0x98080000,0x02040000,
-/*
-
-
- 
-
-; Little patched jump, used to overcome problems with TEMP getting
-; corrupted on memory moves.
-
-jump_temp:
-    JUMP 0
-
-at 0x00000271 : */	0x80080000,0x00000000,
-};
-
-#define A_NCR53c7xx_msg_abort	0x00000000
-static u32 A_NCR53c7xx_msg_abort_used[] __attribute((unused)) = {
-	0x0000026c,
-};
-
-#define A_NCR53c7xx_msg_reject	0x00000000
-static u32 A_NCR53c7xx_msg_reject_used[] __attribute((unused)) = {
-	0x00000186,
-};
-
-#define A_NCR53c7xx_sink	0x00000000
-static u32 A_NCR53c7xx_sink_used[] __attribute((unused)) = {
-	0x00000258,
-	0x0000025e,
-	0x00000264,
-};
-
-#define A_NCR53c7xx_zero	0x00000000
-static u32 A_NCR53c7xx_zero_used[] __attribute((unused)) = {
-	0x00000254,
-	0x0000026a,
-};
-
-#define A_NOP_insn	0x00000000
-static u32 A_NOP_insn_used[] __attribute((unused)) = {
-	0x00000017,
-};
-
-#define A_addr_dsa	0x00000000
-static u32 A_addr_dsa_used[] __attribute((unused)) = {
-	0x0000000f,
-	0x00000026,
-	0x00000033,
-	0x00000040,
-	0x00000055,
-	0x00000079,
-	0x0000008e,
-	0x000000bc,
-	0x000000d2,
-	0x00000130,
-	0x000001a5,
-	0x000001bb,
-	0x000001e3,
-};
-
-#define A_addr_reconnect_dsa_head	0x00000000
-static u32 A_addr_reconnect_dsa_head_used[] __attribute((unused)) = {
-	0x000001b7,
-};
-
-#define A_addr_scratch	0x00000000
-static u32 A_addr_scratch_used[] __attribute((unused)) = {
-	0x00000002,
-	0x00000004,
-	0x00000008,
-	0x00000020,
-	0x00000022,
-	0x00000049,
-	0x00000060,
-	0x0000006a,
-	0x00000071,
-	0x00000073,
-	0x000000ab,
-	0x000000b5,
-	0x000000c1,
-	0x000000cb,
-	0x0000012c,
-	0x00000142,
-	0x00000157,
-	0x000001b2,
-	0x000001b4,
-	0x000001df,
-	0x000001f7,
-};
-
-#define A_addr_temp	0x00000000
-static u32 A_addr_temp_used[] __attribute((unused)) = {
-};
-
-#define A_dmode_memory_to_memory	0x00000000
-static u32 A_dmode_memory_to_memory_used[] __attribute((unused)) = {
-};
-
-#define A_dmode_memory_to_ncr	0x00000000
-static u32 A_dmode_memory_to_ncr_used[] __attribute((unused)) = {
-};
-
-#define A_dmode_ncr_to_memory	0x00000000
-static u32 A_dmode_ncr_to_memory_used[] __attribute((unused)) = {
-};
-
-#define A_dsa_check_reselect	0x00000000
-static u32 A_dsa_check_reselect_used[] __attribute((unused)) = {
-	0x000001d0,
-};
-
-#define A_dsa_cmdout	0x00000048
-static u32 A_dsa_cmdout_used[] __attribute((unused)) = {
-	0x0000009a,
-};
-
-#define A_dsa_cmnd	0x00000038
-static u32 A_dsa_cmnd_used[] __attribute((unused)) = {
-};
-
-#define A_dsa_datain	0x00000054
-static u32 A_dsa_datain_used[] __attribute((unused)) = {
-	0x000000c2,
-};
-
-#define A_dsa_dataout	0x00000050
-static u32 A_dsa_dataout_used[] __attribute((unused)) = {
-	0x000000ac,
-};
-
-#define A_dsa_end	0x00000070
-static u32 A_dsa_end_used[] __attribute((unused)) = {
-};
-
-#define A_dsa_fields_start	0x00000000
-static u32 A_dsa_fields_start_used[] __attribute((unused)) = {
-};
-
-#define A_dsa_msgin	0x00000058
-static u32 A_dsa_msgin_used[] __attribute((unused)) = {
-	0x0000019c,
-};
-
-#define A_dsa_msgout	0x00000040
-static u32 A_dsa_msgout_used[] __attribute((unused)) = {
-	0x00000089,
-};
-
-#define A_dsa_msgout_other	0x00000068
-static u32 A_dsa_msgout_other_used[] __attribute((unused)) = {
-	0x00000194,
-};
-
-#define A_dsa_next	0x00000030
-static u32 A_dsa_next_used[] __attribute((unused)) = {
-	0x00000061,
-};
-
-#define A_dsa_restore_pointers	0x00000000
-static u32 A_dsa_restore_pointers_used[] __attribute((unused)) = {
-	0x00000146,
-};
-
-#define A_dsa_save_data_pointer	0x00000000
-static u32 A_dsa_save_data_pointer_used[] __attribute((unused)) = {
-	0x00000131,
-};
-
-#define A_dsa_select	0x0000003c
-static u32 A_dsa_select_used[] __attribute((unused)) = {
-	0x00000082,
-};
-
-#define A_dsa_sscf_710	0x00000000
-static u32 A_dsa_sscf_710_used[] __attribute((unused)) = {
-	0x00000007,
-};
-
-#define A_dsa_status	0x00000060
-static u32 A_dsa_status_used[] __attribute((unused)) = {
-	0x00000198,
-};
-
-#define A_dsa_temp_addr_array_value	0x00000000
-static u32 A_dsa_temp_addr_array_value_used[] __attribute((unused)) = {
-};
-
-#define A_dsa_temp_addr_dsa_value	0x00000000
-static u32 A_dsa_temp_addr_dsa_value_used[] __attribute((unused)) = {
-	0x00000001,
-};
-
-#define A_dsa_temp_addr_new_value	0x00000000
-static u32 A_dsa_temp_addr_new_value_used[] __attribute((unused)) = {
-};
-
-#define A_dsa_temp_addr_next	0x00000000
-static u32 A_dsa_temp_addr_next_used[] __attribute((unused)) = {
-	0x0000001c,
-	0x0000004f,
-};
-
-#define A_dsa_temp_addr_residual	0x00000000
-static u32 A_dsa_temp_addr_residual_used[] __attribute((unused)) = {
-	0x0000002d,
-	0x0000003b,
-};
-
-#define A_dsa_temp_addr_saved_pointer	0x00000000
-static u32 A_dsa_temp_addr_saved_pointer_used[] __attribute((unused)) = {
-	0x0000002b,
-	0x00000037,
-};
-
-#define A_dsa_temp_addr_saved_residual	0x00000000
-static u32 A_dsa_temp_addr_saved_residual_used[] __attribute((unused)) = {
-	0x0000002e,
-	0x0000003a,
-};
-
-#define A_dsa_temp_lun	0x00000000
-static u32 A_dsa_temp_lun_used[] __attribute((unused)) = {
-	0x0000004c,
-};
-
-#define A_dsa_temp_next	0x00000000
-static u32 A_dsa_temp_next_used[] __attribute((unused)) = {
-	0x0000001f,
-};
-
-#define A_dsa_temp_sync	0x00000000
-static u32 A_dsa_temp_sync_used[] __attribute((unused)) = {
-	0x00000057,
-};
-
-#define A_dsa_temp_target	0x00000000
-static u32 A_dsa_temp_target_used[] __attribute((unused)) = {
-	0x00000045,
-};
-
-#define A_emulfly	0x00000000
-static u32 A_emulfly_used[] __attribute((unused)) = {
-};
-
-#define A_int_debug_break	0x03000000
-static u32 A_int_debug_break_used[] __attribute((unused)) = {
-	0x0000023c,
-};
-
-#define A_int_debug_panic	0x030b0000
-static u32 A_int_debug_panic_used[] __attribute((unused)) = {
-	0x00000209,
-	0x00000219,
-};
-
-#define A_int_err_check_condition	0x00030000
-static u32 A_int_err_check_condition_used[] __attribute((unused)) = {
-	0x000001a9,
-};
-
-#define A_int_err_no_phase	0x00040000
-static u32 A_int_err_no_phase_used[] __attribute((unused)) = {
-};
-
-#define A_int_err_selected	0x00010000
-static u32 A_int_err_selected_used[] __attribute((unused)) = {
-	0x000001ff,
-};
-
-#define A_int_err_unexpected_phase	0x00000000
-static u32 A_int_err_unexpected_phase_used[] __attribute((unused)) = {
-	0x00000092,
-	0x00000098,
-	0x000000a0,
-	0x000000d6,
-	0x000000da,
-	0x000000dc,
-	0x000000e4,
-	0x000000e8,
-	0x000000ea,
-	0x000000f2,
-	0x000000f6,
-	0x000000f8,
-	0x000000fa,
-	0x00000160,
-};
-
-#define A_int_err_unexpected_reselect	0x00020000
-static u32 A_int_err_unexpected_reselect_used[] __attribute((unused)) = {
-	0x000001cd,
-};
-
-#define A_int_msg_1	0x01020000
-static u32 A_int_msg_1_used[] __attribute((unused)) = {
-	0x00000114,
-	0x00000116,
-};
-
-#define A_int_msg_sdtr	0x01010000
-static u32 A_int_msg_sdtr_used[] __attribute((unused)) = {
-	0x00000180,
-};
-
-#define A_int_msg_wdtr	0x01000000
-static u32 A_int_msg_wdtr_used[] __attribute((unused)) = {
-	0x00000174,
-};
-
-#define A_int_norm_aborted	0x02040000
-static u32 A_int_norm_aborted_used[] __attribute((unused)) = {
-	0x00000270,
-};
-
-#define A_int_norm_command_complete	0x02020000
-static u32 A_int_norm_command_complete_used[] __attribute((unused)) = {
-};
-
-#define A_int_norm_disconnected	0x02030000
-static u32 A_int_norm_disconnected_used[] __attribute((unused)) = {
-};
-
-#define A_int_norm_emulateintfly	0x02060000
-static u32 A_int_norm_emulateintfly_used[] __attribute((unused)) = {
-	0x000001a2,
-};
-
-#define A_int_norm_reselect_complete	0x02010000
-static u32 A_int_norm_reselect_complete_used[] __attribute((unused)) = {
-};
-
-#define A_int_norm_reset	0x02050000
-static u32 A_int_norm_reset_used[] __attribute((unused)) = {
-};
-
-#define A_int_norm_select_complete	0x02000000
-static u32 A_int_norm_select_complete_used[] __attribute((unused)) = {
-};
-
-#define A_int_test_1	0x04000000
-static u32 A_int_test_1_used[] __attribute((unused)) = {
-	0x0000021e,
-};
-
-#define A_int_test_2	0x04010000
-static u32 A_int_test_2_used[] __attribute((unused)) = {
-	0x0000023a,
-};
-
-#define A_int_test_3	0x04020000
-static u32 A_int_test_3_used[] __attribute((unused)) = {
-};
-
-#define A_msg_buf	0x00000000
-static u32 A_msg_buf_used[] __attribute((unused)) = {
-	0x00000108,
-	0x00000162,
-	0x0000016c,
-	0x00000172,
-	0x00000178,
-	0x0000017e,
-};
-
-#define A_reconnect_dsa_head	0x00000000
-static u32 A_reconnect_dsa_head_used[] __attribute((unused)) = {
-	0x0000006d,
-	0x00000074,
-	0x000001b1,
-};
-
-#define A_reselected_identify	0x00000000
-static u32 A_reselected_identify_used[] __attribute((unused)) = {
-	0x00000048,
-	0x000001af,
-};
-
-#define A_reselected_tag	0x00000000
-static u32 A_reselected_tag_used[] __attribute((unused)) = {
-};
-
-#define A_saved_dsa	0x00000000
-static u32 A_saved_dsa_used[] __attribute((unused)) = {
-	0x00000005,
-	0x0000000e,
-	0x00000023,
-	0x00000025,
-	0x00000032,
-	0x0000003f,
-	0x00000054,
-	0x0000005f,
-	0x00000070,
-	0x00000078,
-	0x0000008d,
-	0x000000aa,
-	0x000000bb,
-	0x000000c0,
-	0x000000d1,
-	0x0000012f,
-	0x000001a4,
-	0x000001b5,
-	0x000001ba,
-	0x000001e2,
-};
-
-#define A_schedule	0x00000000
-static u32 A_schedule_used[] __attribute((unused)) = {
-	0x0000007d,
-	0x000001a7,
-	0x00000203,
-	0x00000244,
-};
-
-#define A_test_dest	0x00000000
-static u32 A_test_dest_used[] __attribute((unused)) = {
-	0x0000021c,
-};
-
-#define A_test_src	0x00000000
-static u32 A_test_src_used[] __attribute((unused)) = {
-	0x0000021b,
-};
-
-#define Ent_accept_message	0x00000624
-#define Ent_cmdout_cmdout	0x00000264
-#define Ent_command_complete	0x0000065c
-#define Ent_command_complete_msgin	0x0000066c
-#define Ent_data_transfer	0x0000026c
-#define Ent_datain_to_jump	0x00000334
-#define Ent_debug_break	0x000008ec
-#define Ent_dsa_code_begin	0x00000000
-#define Ent_dsa_code_check_reselect	0x0000010c
-#define Ent_dsa_code_fix_jump	0x00000058
-#define Ent_dsa_code_restore_pointers	0x000000d8
-#define Ent_dsa_code_save_data_pointer	0x000000a4
-#define Ent_dsa_code_template	0x00000000
-#define Ent_dsa_code_template_end	0x00000178
-#define Ent_dsa_schedule	0x00000178
-#define Ent_dsa_zero	0x00000178
-#define Ent_end_data_transfer	0x000002a4
-#define Ent_initiator_abort	0x00000914
-#define Ent_msg_in	0x0000041c
-#define Ent_msg_in_restart	0x000003fc
-#define Ent_other_in	0x0000038c
-#define Ent_other_out	0x00000354
-#define Ent_other_transfer	0x000003c4
-#define Ent_reject_message	0x00000604
-#define Ent_reselected_check_next	0x000006f0
-#define Ent_reselected_ok	0x00000798
-#define Ent_respond_message	0x0000063c
-#define Ent_select	0x000001f8
-#define Ent_select_msgout	0x00000218
-#define Ent_target_abort	0x000008f4
-#define Ent_test_1	0x00000868
-#define Ent_test_2	0x0000087c
-#define Ent_test_2_msgout	0x0000089c
-#define Ent_wait_reselect	0x000006a8
-static u32 LABELPATCHES[] __attribute((unused)) = {
-	0x00000011,
-	0x0000001a,
-	0x0000001d,
-	0x00000028,
-	0x0000002a,
-	0x00000035,
-	0x00000038,
-	0x00000042,
-	0x00000050,
-	0x00000052,
-	0x0000006b,
-	0x00000083,
-	0x00000085,
-	0x00000090,
-	0x00000094,
-	0x00000096,
-	0x0000009c,
-	0x0000009e,
-	0x000000a2,
-	0x000000a4,
-	0x000000a6,
-	0x000000a8,
-	0x000000b6,
-	0x000000b9,
-	0x000000cc,
-	0x000000cf,
-	0x000000d8,
-	0x000000de,
-	0x000000e0,
-	0x000000e6,
-	0x000000ec,
-	0x000000ee,
-	0x000000f4,
-	0x000000fc,
-	0x000000fe,
-	0x0000010a,
-	0x0000010c,
-	0x0000010e,
-	0x00000110,
-	0x00000112,
-	0x00000118,
-	0x0000011a,
-	0x0000012d,
-	0x00000143,
-	0x00000158,
-	0x0000015c,
-	0x00000164,
-	0x00000166,
-	0x00000168,
-	0x0000016e,
-	0x0000017a,
-	0x000001ab,
-	0x000001b8,
-	0x000001bf,
-	0x000001c3,
-	0x000001c7,
-	0x000001cb,
-	0x000001e0,
-	0x000001f8,
-	0x00000207,
-	0x0000020f,
-	0x00000213,
-	0x00000217,
-	0x00000224,
-	0x00000226,
-	0x00000248,
-	0x0000024a,
-	0x0000024c,
-	0x0000024e,
-	0x00000250,
-	0x00000252,
-	0x00000256,
-	0x0000025a,
-	0x0000025c,
-	0x00000260,
-	0x00000262,
-	0x00000266,
-	0x00000268,
-};
-
-static struct {
-	u32	offset;
-	void		*address;
-} EXTERNAL_PATCHES[] __attribute((unused)) = {
-};
-
-static u32 INSTRUCTIONS __attribute((unused))	= 290;
-static u32 PATCHES __attribute((unused))	= 78;
-static u32 EXTERNAL_PATCHES_LEN __attribute((unused))	= 0;
diff --git a/drivers/scsi/53c7xx_u.h_shipped b/drivers/scsi/53c7xx_u.h_shipped
deleted file mode 100644
index 7b337174e22..00000000000
--- a/drivers/scsi/53c7xx_u.h_shipped
+++ /dev/null
@@ -1,102 +0,0 @@
-#undef A_NCR53c7xx_msg_abort
-#undef A_NCR53c7xx_msg_reject
-#undef A_NCR53c7xx_sink
-#undef A_NCR53c7xx_zero
-#undef A_NOP_insn
-#undef A_addr_dsa
-#undef A_addr_reconnect_dsa_head
-#undef A_addr_scratch
-#undef A_addr_temp
-#undef A_dmode_memory_to_memory
-#undef A_dmode_memory_to_ncr
-#undef A_dmode_ncr_to_memory
-#undef A_dsa_check_reselect
-#undef A_dsa_cmdout
-#undef A_dsa_cmnd
-#undef A_dsa_datain
-#undef A_dsa_dataout
-#undef A_dsa_end
-#undef A_dsa_fields_start
-#undef A_dsa_msgin
-#undef A_dsa_msgout
-#undef A_dsa_msgout_other
-#undef A_dsa_next
-#undef A_dsa_restore_pointers
-#undef A_dsa_save_data_pointer
-#undef A_dsa_select
-#undef A_dsa_sscf_710
-#undef A_dsa_status
-#undef A_dsa_temp_addr_array_value
-#undef A_dsa_temp_addr_dsa_value
-#undef A_dsa_temp_addr_new_value
-#undef A_dsa_temp_addr_next
-#undef A_dsa_temp_addr_residual
-#undef A_dsa_temp_addr_saved_pointer
-#undef A_dsa_temp_addr_saved_residual
-#undef A_dsa_temp_lun
-#undef A_dsa_temp_next
-#undef A_dsa_temp_sync
-#undef A_dsa_temp_target
-#undef A_emulfly
-#undef A_int_debug_break
-#undef A_int_debug_panic
-#undef A_int_err_check_condition
-#undef A_int_err_no_phase
-#undef A_int_err_selected
-#undef A_int_err_unexpected_phase
-#undef A_int_err_unexpected_reselect
-#undef A_int_msg_1
-#undef A_int_msg_sdtr
-#undef A_int_msg_wdtr
-#undef A_int_norm_aborted
-#undef A_int_norm_command_complete
-#undef A_int_norm_disconnected
-#undef A_int_norm_emulateintfly
-#undef A_int_norm_reselect_complete
-#undef A_int_norm_reset
-#undef A_int_norm_select_complete
-#undef A_int_test_1
-#undef A_int_test_2
-#undef A_int_test_3
-#undef A_msg_buf
-#undef A_reconnect_dsa_head
-#undef A_reselected_identify
-#undef A_reselected_tag
-#undef A_saved_dsa
-#undef A_schedule
-#undef A_test_dest
-#undef A_test_src
-#undef Ent_accept_message
-#undef Ent_cmdout_cmdout
-#undef Ent_command_complete
-#undef Ent_command_complete_msgin
-#undef Ent_data_transfer
-#undef Ent_datain_to_jump
-#undef Ent_debug_break
-#undef Ent_dsa_code_begin
-#undef Ent_dsa_code_check_reselect
-#undef Ent_dsa_code_fix_jump
-#undef Ent_dsa_code_restore_pointers
-#undef Ent_dsa_code_save_data_pointer
-#undef Ent_dsa_code_template
-#undef Ent_dsa_code_template_end
-#undef Ent_dsa_schedule
-#undef Ent_dsa_zero
-#undef Ent_end_data_transfer
-#undef Ent_initiator_abort
-#undef Ent_msg_in
-#undef Ent_msg_in_restart
-#undef Ent_other_in
-#undef Ent_other_out
-#undef Ent_other_transfer
-#undef Ent_reject_message
-#undef Ent_reselected_check_next
-#undef Ent_reselected_ok
-#undef Ent_respond_message
-#undef Ent_select
-#undef Ent_select_msgout
-#undef Ent_target_abort
-#undef Ent_test_1
-#undef Ent_test_2
-#undef Ent_test_2_msgout
-#undef Ent_wait_reselect
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index fc05d90229a..51cba91cd22 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_SCSI_SAS_LIBSAS)	+= libsas/
 
 obj-$(CONFIG_ISCSI_TCP) 	+= libiscsi.o	iscsi_tcp.o
 obj-$(CONFIG_INFINIBAND_ISER) 	+= libiscsi.o
-obj-$(CONFIG_SCSI_AMIGA7XX)	+= amiga7xx.o	53c7xx.o
 obj-$(CONFIG_A3000_SCSI)	+= a3000.o	wd33c93.o
 obj-$(CONFIG_A2091_SCSI)	+= a2091.o	wd33c93.o
 obj-$(CONFIG_GVP11_SCSI)	+= gvp11.o	wd33c93.o
@@ -53,8 +52,6 @@ obj-$(CONFIG_ATARI_SCSI)	+= atari_scsi.o
 obj-$(CONFIG_MAC_SCSI)		+= mac_scsi.o
 obj-$(CONFIG_SCSI_MAC_ESP)	+= mac_esp.o	NCR53C9x.o
 obj-$(CONFIG_SUN3_SCSI)		+= sun3_scsi.o  sun3_scsi_vme.o
-obj-$(CONFIG_MVME16x_SCSI)	+= mvme16x.o	53c7xx.o
-obj-$(CONFIG_BVME6000_SCSI)	+= bvme6000.o	53c7xx.o
 obj-$(CONFIG_SCSI_SIM710)	+= 53c700.o	sim710.o
 obj-$(CONFIG_SCSI_ADVANSYS)	+= advansys.o
 obj-$(CONFIG_SCSI_PSI240I)	+= psi240i.o
@@ -169,10 +166,8 @@ NCR_Q720_mod-objs	:= NCR_Q720.o ncr53c8xx.o
 oktagon_esp_mod-objs	:= oktagon_esp.o oktagon_io.o
 
 # Files generated that shall be removed upon make clean
-clean-files :=	53c7xx_d.h 53c700_d.h	\
-		53c7xx_u.h 53c700_u.h
+clean-files :=	53c700_d.h 53c700_u.h
 
-$(obj)/53c7xx.o:   $(obj)/53c7xx_d.h $(obj)/53c7xx_u.h
 $(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
 
 # If you want to play with the firmware, uncomment
@@ -180,11 +175,6 @@ $(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
 
 ifdef GENERATE_FIRMWARE
 
-$(obj)/53c7xx_d.h: $(src)/53c7xx.scr $(src)/script_asm.pl
-	$(CPP) -traditional -DCHIP=710 - < $< | grep -v '^#' | $(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h)
-
-$(obj)/53c7xx_u.h: $(obj)/53c7xx_d.h
-
 $(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl
 	$(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $<
 
diff --git a/drivers/scsi/amiga7xx.c b/drivers/scsi/amiga7xx.c
deleted file mode 100644
index d5d3c4d5a25..00000000000
--- a/drivers/scsi/amiga7xx.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux.
- *		Amiga MacroSystemUS WarpEngine SCSI controller.
- *		Amiga Technologies A4000T SCSI controller.
- *		Amiga Technologies/DKB A4091 SCSI controller.
- *
- * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk>
- * plus modifications of the 53c7xx.c driver to support the Amiga.
- */
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/blkdev.h>
-#include <linux/zorro.h>
-#include <linux/stat.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/amigaints.h>
-#include <asm/amigahw.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "53c7xx.h"
-#include "amiga7xx.h"
-
-
-static int amiga7xx_register_one(struct scsi_host_template *tpnt,
-				 unsigned long address)
-{
-    long long options;
-    int clock;
-
-    if (!request_mem_region(address, 0x1000, "ncr53c710"))
-	return 0;
-
-    address = (unsigned long)z_ioremap(address, 0x1000);
-    options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 | OPTION_INTFLY |
-	      OPTION_SYNCHRONOUS | OPTION_ALWAYS_SYNCHRONOUS |
-	      OPTION_DISCONNECT;
-    clock = 50000000;	/* 50 MHz SCSI Clock */
-    ncr53c7xx_init(tpnt, 0, 710, address, 0, IRQ_AMIGA_PORTS, DMA_NONE,
-		   options, clock);
-    return 1;
-}
-
-
-#ifdef CONFIG_ZORRO
-
-static struct {
-    zorro_id id;
-    unsigned long offset;
-    int absolute;	/* offset is absolute address */
-} amiga7xx_table[] = {
-    { .id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS, .offset = 0xf40000,
-      .absolute = 1 },
-    { .id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx, .offset = 0x40000 },
-    { .id = ZORRO_PROD_CBM_A4091_1, .offset = 0x800000 },
-    { .id = ZORRO_PROD_CBM_A4091_2, .offset = 0x800000 },
-    { .id = ZORRO_PROD_GVP_GFORCE_040_060, .offset = 0x40000 },
-    { 0 }
-};
-
-static int __init amiga7xx_zorro_detect(struct scsi_host_template *tpnt)
-{
-    int num = 0, i;
-    struct zorro_dev *z = NULL;
-    unsigned long address;
-
-    while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
-	for (i = 0; amiga7xx_table[i].id; i++)
-	    if (z->id == amiga7xx_table[i].id)
-		break;
-	if (!amiga7xx_table[i].id)
-	    continue;
-	if (amiga7xx_table[i].absolute)
-	    address = amiga7xx_table[i].offset;
-	else
-	    address = z->resource.start + amiga7xx_table[i].offset;
-	num += amiga7xx_register_one(tpnt, address);
-    }
-    return num;
-}
-
-#endif /* CONFIG_ZORRO */
-
-
-int __init amiga7xx_detect(struct scsi_host_template *tpnt)
-{
-    static unsigned char called = 0;
-    int num = 0;
-
-    if (called || !MACH_IS_AMIGA)
-	return 0;
-
-    tpnt->proc_name = "Amiga7xx";
-
-    if (AMIGAHW_PRESENT(A4000_SCSI))
-	num += amiga7xx_register_one(tpnt, 0xdd0040);
-
-#ifdef CONFIG_ZORRO
-    num += amiga7xx_zorro_detect(tpnt);
-#endif
-
-    called = 1;
-    return num;
-}
-
-static int amiga7xx_release(struct Scsi_Host *shost)
-{
-	if (shost->irq)
-		free_irq(shost->irq, NULL);
-	if (shost->dma_channel != 0xff)
-		free_dma(shost->dma_channel);
-	if (shost->io_port && shost->n_io_port)
-		release_region(shost->io_port, shost->n_io_port);
-	scsi_unregister(shost);
-	return 0;
-}
-
-static struct scsi_host_template driver_template = {
-	.name			= "Amiga NCR53c710 SCSI",
-	.detect			= amiga7xx_detect,
-	.release		= amiga7xx_release,
-	.queuecommand		= NCR53c7xx_queue_command,
-	.abort			= NCR53c7xx_abort,
-	.reset			= NCR53c7xx_reset,
-	.can_queue		= 24,
-	.this_id		= 7,
-	.sg_tablesize		= 63,
-	.cmd_per_lun		= 3,
-	.use_clustering		= DISABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
diff --git a/drivers/scsi/amiga7xx.h b/drivers/scsi/amiga7xx.h
deleted file mode 100644
index 7cd63a99688..00000000000
--- a/drivers/scsi/amiga7xx.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef AMIGA7XX_H
-
-#include <linux/types.h>
-
-int amiga7xx_detect(struct scsi_host_template *);
-const char *NCR53c7x0_info(void);
-int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int NCR53c7xx_abort(Scsi_Cmnd *);
-int NCR53c7x0_release (struct Scsi_Host *);
-int NCR53c7xx_reset(Scsi_Cmnd *, unsigned int);
-void NCR53c7x0_intr(int irq, void *dev_id);
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 3
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 24
-#endif
-
-#include <scsi/scsicam.h>
-
-#endif /* AMIGA7XX_H */
diff --git a/drivers/scsi/bvme6000.c b/drivers/scsi/bvme6000.c
deleted file mode 100644
index 599b400a3c4..00000000000
--- a/drivers/scsi/bvme6000.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Detection routine for the NCR53c710 based BVME6000 SCSI Controllers for Linux.
- *
- * Based on work by Alan Hourihane
- */
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/blkdev.h>
-#include <linux/zorro.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/bvme6000hw.h>
-#include <asm/irq.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "53c7xx.h"
-#include "bvme6000.h"
-
-#include<linux/stat.h>
-
-
-int bvme6000_scsi_detect(struct scsi_host_template *tpnt)
-{
-    static unsigned char called = 0;
-    int clock;
-    long long options;
-
-    if (called)
-	return 0;
-    if (!MACH_IS_BVME6000)
-	return 0;
-
-    tpnt->proc_name = "BVME6000";
-
-    options = OPTION_MEMORY_MAPPED|OPTION_DEBUG_TEST1|OPTION_INTFLY|OPTION_SYNCHRONOUS|OPTION_ALWAYS_SYNCHRONOUS|OPTION_DISCONNECT;
-
-    clock = 40000000;	/* 66MHz SCSI Clock */
-
-    ncr53c7xx_init(tpnt, 0, 710, (unsigned long)BVME_NCR53C710_BASE,
-			0, BVME_IRQ_SCSI, DMA_NONE,
-			options, clock);
-    called = 1;
-    return 1;
-}
-
-static int bvme6000_scsi_release(struct Scsi_Host *shost)
-{
-	if (shost->irq)
-		free_irq(shost->irq, NULL);
-	if (shost->dma_channel != 0xff)
-		free_dma(shost->dma_channel);
-	if (shost->io_port && shost->n_io_port)
-		release_region(shost->io_port, shost->n_io_port);
-	scsi_unregister(shost);
-	return 0;
-}
-
-static struct scsi_host_template driver_template = {
-	.name			= "BVME6000 NCR53c710 SCSI",
-	.detect			= bvme6000_scsi_detect,
-	.release		= bvme6000_scsi_release,
-	.queuecommand		= NCR53c7xx_queue_command,
-	.abort			= NCR53c7xx_abort,
-	.reset			= NCR53c7xx_reset,
-	.can_queue		= 24,
-	.this_id		= 7,
-	.sg_tablesize		= 63,
-	.cmd_per_lun		= 3,
-	.use_clustering		= DISABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
diff --git a/drivers/scsi/bvme6000.h b/drivers/scsi/bvme6000.h
deleted file mode 100644
index ea3e4b2b922..00000000000
--- a/drivers/scsi/bvme6000.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef BVME6000_SCSI_H
-#define BVME6000_SCSI_H
-
-#include <linux/types.h>
-
-int bvme6000_scsi_detect(struct scsi_host_template *);
-const char *NCR53c7x0_info(void);
-int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int NCR53c7xx_abort(Scsi_Cmnd *);
-int NCR53c7x0_release (struct Scsi_Host *);
-int NCR53c7xx_reset(Scsi_Cmnd *, unsigned int);
-void NCR53c7x0_intr(int irq, void *dev_id);
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 3
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 24
-#endif
-
-#include <scsi/scsicam.h>
-
-#endif /* BVME6000_SCSI_H */
diff --git a/drivers/scsi/mvme16x.c b/drivers/scsi/mvme16x.c
deleted file mode 100644
index 575fe6f7e0e..00000000000
--- a/drivers/scsi/mvme16x.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Detection routine for the NCR53c710 based MVME16x SCSI Controllers for Linux.
- *
- * Based on work by Alan Hourihane
- */
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/blkdev.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/mvme16xhw.h>
-#include <asm/irq.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "53c7xx.h"
-#include "mvme16x.h"
-
-#include<linux/stat.h>
-
-
-int mvme16x_scsi_detect(struct scsi_host_template *tpnt)
-{
-    static unsigned char called = 0;
-    int clock;
-    long long options;
-
-    if (!MACH_IS_MVME16x)
-		return 0;
-    if (mvme16x_config & MVME16x_CONFIG_NO_SCSICHIP) {
-	printk ("SCSI detection disabled, SCSI chip not present\n");
-	return 0;
-    }
-    if (called)
-	return 0;
-
-    tpnt->proc_name = "MVME16x";
-
-    options = OPTION_MEMORY_MAPPED|OPTION_DEBUG_TEST1|OPTION_INTFLY|OPTION_SYNCHRONOUS|OPTION_ALWAYS_SYNCHRONOUS|OPTION_DISCONNECT;
-
-    clock = 66000000;	/* 66MHz SCSI Clock */
-
-    ncr53c7xx_init(tpnt, 0, 710, (unsigned long)0xfff47000,
-			0, MVME16x_IRQ_SCSI, DMA_NONE,
-			options, clock);
-    called = 1;
-    return 1;
-}
-
-static int mvme16x_scsi_release(struct Scsi_Host *shost)
-{
-	if (shost->irq)
-		free_irq(shost->irq, NULL);
-	if (shost->dma_channel != 0xff)
-		free_dma(shost->dma_channel);
-	if (shost->io_port && shost->n_io_port)
-		release_region(shost->io_port, shost->n_io_port);
-	scsi_unregister(shost);
-	return 0;
-}
-
-static struct scsi_host_template driver_template = {
-	.name			= "MVME16x NCR53c710 SCSI",
-	.detect			= mvme16x_scsi_detect,
-	.release		= mvme16x_scsi_release,
-	.queuecommand		= NCR53c7xx_queue_command,
-	.abort			= NCR53c7xx_abort,
-	.reset			= NCR53c7xx_reset,
-	.can_queue		= 24,
-	.this_id		= 7,
-	.sg_tablesize		= 63,
-	.cmd_per_lun		= 3,
-	.use_clustering		= DISABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
diff --git a/drivers/scsi/mvme16x.h b/drivers/scsi/mvme16x.h
deleted file mode 100644
index 73e33b37a3f..00000000000
--- a/drivers/scsi/mvme16x.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef MVME16x_SCSI_H
-#define MVME16x_SCSI_H
-
-#include <linux/types.h>
-
-int mvme16x_scsi_detect(struct scsi_host_template *);
-const char *NCR53c7x0_info(void);
-int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int NCR53c7xx_abort(Scsi_Cmnd *);
-int NCR53c7x0_release (struct Scsi_Host *);
-int NCR53c7xx_reset(Scsi_Cmnd *, unsigned int);
-void NCR53c7x0_intr(int irq, void *dev_id);
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 3
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 24
-#endif
-
-#include <scsi/scsicam.h>
-
-#endif /* MVME16x_SCSI_H */