diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-02-19 09:52:12 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-02-19 09:52:12 -0800 |
commit | 402a917aca5daca69fcc91f43e6f1e6939cf393b (patch) | |
tree | cd3668339f4f2de35c62586239380d1ab15c6f89 | |
parent | bcf8951fc23476c9190a7df0bc501ff47d0c3a61 (diff) | |
parent | 9dd446f657ebebb209274878be5d01103fcfe988 (diff) | |
download | linux-3.10-402a917aca5daca69fcc91f43e6f1e6939cf393b.tar.gz linux-3.10-402a917aca5daca69fcc91f43e6f1e6939cf393b.tar.bz2 linux-3.10-402a917aca5daca69fcc91f43e6f1e6939cf393b.zip |
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 5405/1: ep93xx: remove unused gesbc9312.h header
[ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC
[ARM] omap: fix clock reparenting in omap2_clk_set_parent()
[ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0
[ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()
[ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support
[ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller
[ARM] 5391/1: AT91: Enable GPIO clocks earlier
[ARM] 5390/1: AT91: Watchdog fixes
[ARM] 5398/1: Add Wan ZongShun to MAINTAINERS for W90P910
[ARM] omap: fix _omap2_clksel_get_src_field()
[ARM] omap: fix omap2_divisor_to_clksel() error return value
28 files changed, 77 insertions, 88 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index a2008bd587c..06e03913d2d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -692,6 +692,13 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/NUVOTON W90X900 ARM ARCHITECTURE +P: Wan ZongShun +M: mcuos.com@gmail.com +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.mcuos.com +S: Maintained + ARPD SUPPORT P: Jonathan Layes L: netdev@vger.kernel.org diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index e0ee7060f9a..98e2f3de4bc 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -608,7 +608,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91SAM9_WATCHDOG=y +CONFIG_AT91SAM9X_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 01d1ef97d8b..14945614239 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -700,7 +700,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91SAM9_WATCHDOG=y +CONFIG_AT91SAM9X_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index 036a126725c..21599f3c627 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -710,7 +710,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91SAM9_WATCHDOG=y +CONFIG_AT91SAM9X_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index 237a2a6a851..e2df81a3e80 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -606,7 +606,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91SAM9_WATCHDOG=y +CONFIG_AT91SAM9X_WATCHDOG=y # # Sonics Silicon Backplane diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index cd1d717903a..9b32d0eb89b 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -727,7 +727,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -# CONFIG_AT91SAM9_WATCHDOG is not set +# CONFIG_AT91SAM9X_WATCHDOG is not set # # USB-based Watchdog Cards diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index 84849098c8e..d4a0da1e48f 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -74,9 +74,9 @@ EXPORT_SYMBOL(elf_set_personality); */ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack) { - if (executable_stack != EXSTACK_ENABLE_X) + if (executable_stack != EXSTACK_DISABLE_X) return 1; - if (cpu_architecture() <= CPU_ARCH_ARMv6) + if (cpu_architecture() < CPU_ARCH_ARMv6) return 1; return 0; } diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 9eca2209cde..412aa49ad2f 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -697,7 +697,7 @@ static void __init at91_add_device_rtt(void) * Watchdog * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) static struct platform_device at91cap9_wdt_device = { .name = "at91_wdt", .id = -1, diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index fdde1ea21b0..d74c9ac007e 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -643,7 +643,7 @@ static void __init at91_add_device_rtt(void) * Watchdog * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) static struct platform_device at91sam9260_wdt_device = { .name = "at91_wdt", .id = -1, diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 17289756f80..59fc48311fb 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -621,7 +621,7 @@ static void __init at91_add_device_rtt(void) * Watchdog * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) static struct platform_device at91sam9261_wdt_device = { .name = "at91_wdt", .id = -1, diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index b753cb879d8..134af97ff34 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -854,7 +854,7 @@ static void __init at91_add_device_rtt(void) * Watchdog * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) static struct platform_device at91sam9263_wdt_device = { .name = "at91_wdt", .id = -1, diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 145324f4ec5..728186515cd 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -609,7 +609,7 @@ static void __init at91_add_device_rtt(void) * Watchdog * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) static struct platform_device at91sam9rl_wdt_device = { .name = "at91_wdt", .id = -1, diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 9b0447c3d59..2f7d4977dce 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -490,7 +490,8 @@ postcore_initcall(at91_gpio_debugfs_init); /*--------------------------------------------------------------------------*/ -/* This lock class tells lockdep that GPIO irqs are in a different +/* + * This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. */ static struct lock_class_key gpio_lock_class; @@ -509,9 +510,6 @@ void __init at91_gpio_irq_setup(void) unsigned id = this->id; unsigned i; - /* enable PIO controller's clock */ - clk_enable(this->clock); - __raw_writel(~0, this->regbase + PIO_IDR); for (i = 0, pin = this->chipbase; i < 32; i++, pin++) { @@ -556,7 +554,14 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) data->chipbase = PIN_BASE + i * 32; data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS; - /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */ + /* enable PIO controller's clock */ + clk_enable(data->clock); + + /* + * Some processors share peripheral ID between multiple GPIO banks. + * SAM9263 (PIOC, PIOD, PIOE) + * CAP9 (PIOA, PIOB, PIOC, PIOD) + */ if (last && last->id == data->id) last->next = data; } diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index fb51f0e0a83..0b3ae21b456 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -93,6 +93,7 @@ struct atmel_nand_data { u8 enable_pin; /* chip enable */ u8 det_pin; /* card detect */ u8 rdy_pin; /* ready/busy */ + u8 rdy_pin_active_low; /* rdy_pin value is inverted */ u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ u8 bus_width_16; /* buswidth is 16 bit */ diff --git a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h deleted file mode 100644 index 21fe2b922aa..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/gesbc9312.h - */ diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h index 529807d182b..2866297310b 100644 --- a/arch/arm/mach-ep93xx/include/mach/hardware.h +++ b/arch/arm/mach-ep93xx/include/mach/hardware.h @@ -10,7 +10,6 @@ #include "platform.h" -#include "gesbc9312.h" #include "ts72xx.h" #endif diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index efb86b70027..06083b23bb4 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -42,7 +42,7 @@ void __init kirkwood_init_irq(void) writel(0, GPIO_EDGE_CAUSE(32)); for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) { - set_irq_chip(i, &orion_gpio_irq_level_chip); + set_irq_chip(i, &orion_gpio_irq_chip); set_irq_handler(i, handle_level_irq); irq_desc[i].status |= IRQ_LEVEL; set_irq_flags(i, IRQF_VALID); diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index e273418797b..30b7e4bcdbc 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -40,7 +40,7 @@ void __init mv78xx0_init_irq(void) writel(0, GPIO_EDGE_CAUSE(0)); for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) { - set_irq_chip(i, &orion_gpio_irq_level_chip); + set_irq_chip(i, &orion_gpio_irq_chip); set_irq_handler(i, handle_level_irq); irq_desc[i].status |= IRQ_LEVEL; set_irq_flags(i, IRQF_VALID); diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index ad721e0cbf7..ce4d46a4a83 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -565,7 +565,7 @@ u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val) * * Given a struct clk of a rate-selectable clksel clock, and a clock divisor, * find the corresponding register field value. The return register value is - * the value before left-shifting. Returns 0xffffffff on error + * the value before left-shifting. Returns ~0 on error */ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) { @@ -577,7 +577,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) clks = omap2_get_clksel_by_parent(clk, clk->parent); if (clks == NULL) - return 0; + return ~0; for (clkr = clks->rates; clkr->div; clkr++) { if ((clkr->flags & cpu_mask) && (clkr->div == div)) @@ -588,7 +588,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) printk(KERN_ERR "clock: Could not find divisor %d for " "clock %s parent %s\n", div, clk->name, clk->parent->name); - return 0; + return ~0; } return clkr->val; @@ -708,7 +708,7 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr, return 0; for (clkr = clks->rates; clkr->div; clkr++) { - if (clkr->flags & (cpu_mask | DEFAULT_RATE)) + if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE) break; /* Found the default rate for this platform */ } @@ -746,7 +746,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) return -EINVAL; if (clk->usecount > 0) - _omap2_clk_disable(clk); + omap2_clk_disable(clk); /* Set new source value (previous dividers if any in effect) */ reg_val = __raw_readl(src_addr) & ~field_mask; @@ -759,11 +759,11 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) wmb(); } - if (clk->usecount > 0) - _omap2_clk_enable(clk); - clk->parent = new_parent; + if (clk->usecount > 0) + omap2_clk_enable(clk); + /* CLKSEL clocks follow their parents' rates, divided by a divisor */ clk->rate = new_parent->rate; diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index 0caae43301e..e03f7b45cb0 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -44,7 +44,7 @@ void __init orion5x_init_irq(void) * User can use set_type() if he wants to use edge types handlers. */ for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) { - set_irq_chip(i, &orion_gpio_irq_level_chip); + set_irq_chip(i, &orion_gpio_irq_chip); set_irq_handler(i, handle_level_irq); irq_desc[i].status |= IRQ_LEVEL; set_irq_flags(i, IRQF_VALID); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9b36c5cb5e9..d4d082c5c2d 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -693,7 +693,8 @@ static void __init sanity_check_meminfo(void) * Check whether this memory bank would entirely overlap * the vmalloc area. */ - if (__va(bank->start) >= VMALLOC_MIN) { + if (__va(bank->start) >= VMALLOC_MIN || + __va(bank->start) < PAGE_OFFSET) { printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx " "(vmalloc region overlap).\n", bank->start, bank->start + bank->size - 1); diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 967186425ca..0d12c216476 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -265,51 +265,36 @@ EXPORT_SYMBOL(orion_gpio_set_blink); * polarity LEVEL mask * ****************************************************************************/ -static void gpio_irq_edge_ack(u32 irq) -{ - int pin = irq_to_gpio(irq); - - writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin)); -} - -static void gpio_irq_edge_mask(u32 irq) -{ - int pin = irq_to_gpio(irq); - u32 u; - - u = readl(GPIO_EDGE_MASK(pin)); - u &= ~(1 << (pin & 31)); - writel(u, GPIO_EDGE_MASK(pin)); -} -static void gpio_irq_edge_unmask(u32 irq) +static void gpio_irq_ack(u32 irq) { - int pin = irq_to_gpio(irq); - u32 u; - - u = readl(GPIO_EDGE_MASK(pin)); - u |= 1 << (pin & 31); - writel(u, GPIO_EDGE_MASK(pin)); + int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK; + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { + int pin = irq_to_gpio(irq); + writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin)); + } } -static void gpio_irq_level_mask(u32 irq) +static void gpio_irq_mask(u32 irq) { int pin = irq_to_gpio(irq); - u32 u; - - u = readl(GPIO_LEVEL_MASK(pin)); + int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK; + u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ? + GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin); + u32 u = readl(reg); u &= ~(1 << (pin & 31)); - writel(u, GPIO_LEVEL_MASK(pin)); + writel(u, reg); } -static void gpio_irq_level_unmask(u32 irq) +static void gpio_irq_unmask(u32 irq) { int pin = irq_to_gpio(irq); - u32 u; - - u = readl(GPIO_LEVEL_MASK(pin)); + int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK; + u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ? + GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin); + u32 u = readl(reg); u |= 1 << (pin & 31); - writel(u, GPIO_LEVEL_MASK(pin)); + writel(u, reg); } static int gpio_irq_set_type(u32 irq, u32 type) @@ -331,9 +316,9 @@ static int gpio_irq_set_type(u32 irq, u32 type) * Set edge/level type. */ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - desc->chip = &orion_gpio_irq_edge_chip; + desc->handle_irq = handle_edge_irq; } else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - desc->chip = &orion_gpio_irq_level_chip; + desc->handle_irq = handle_level_irq; } else { printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type); return -EINVAL; @@ -371,19 +356,11 @@ static int gpio_irq_set_type(u32 irq, u32 type) return 0; } -struct irq_chip orion_gpio_irq_edge_chip = { - .name = "orion_gpio_irq_edge", - .ack = gpio_irq_edge_ack, - .mask = gpio_irq_edge_mask, - .unmask = gpio_irq_edge_unmask, - .set_type = gpio_irq_set_type, -}; - -struct irq_chip orion_gpio_irq_level_chip = { - .name = "orion_gpio_irq_level", - .mask = gpio_irq_level_mask, - .mask_ack = gpio_irq_level_mask, - .unmask = gpio_irq_level_unmask, +struct irq_chip orion_gpio_irq_chip = { + .name = "orion_gpio", + .ack = gpio_irq_ack, + .mask = gpio_irq_mask, + .unmask = gpio_irq_unmask, .set_type = gpio_irq_set_type, }; diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 54deaf274b5..ec743e82c87 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -31,8 +31,7 @@ void orion_gpio_set_blink(unsigned pin, int blink); /* * GPIO interrupt handling. */ -extern struct irq_chip orion_gpio_irq_edge_chip; -extern struct irq_chip orion_gpio_irq_level_chip; +extern struct irq_chip orion_gpio_irq_chip; void orion_gpio_irq_handler(int irqoff); diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index aafaf7a7888..cff8e84f78f 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -116,6 +116,7 @@ struct atmel_nand_data { int enable_pin; /* chip enable */ int det_pin; /* card detect */ int rdy_pin; /* ready/busy */ + u8 rdy_pin_active_low; /* rdy_pin value is inverted */ u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ u8 bus_width_16; /* buswidth is 16 bit */ diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index c98c1570a40..47a33cec379 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -139,7 +139,8 @@ static int atmel_nand_device_ready(struct mtd_info *mtd) struct nand_chip *nand_chip = mtd->priv; struct atmel_nand_host *host = nand_chip->priv; - return gpio_get_value(host->board->rdy_pin); + return gpio_get_value(host->board->rdy_pin) ^ + !!host->board->rdy_pin_active_low; } /* diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 9b36205c575..0ce4e281984 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -904,8 +904,8 @@ static void pxa25x_ep_fifo_flush(struct usb_ep *_ep) /* most IN status is the same, but ISO can't stall */ *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR - | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) - ? 0 : UDCCS_BI_SST; + | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + ? 0 : UDCCS_BI_SST); } diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 5531691f46e..e35d5458923 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -107,10 +107,10 @@ static int at91_wdt_close(struct inode *inode, struct file *file) static int at91_wdt_settimeout(int new_time) { /* - * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz + * All counting occurs at SLOW_CLOCK / 128 = 256 Hz * * Since WDV is a 16-bit counter, the maximum period is - * 65536 / 0.256 = 256 seconds. + * 65536 / 256 = 256 seconds. */ if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) return -EINVAL; diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index b1da287f90e..a56ac84381b 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -18,6 +18,7 @@ #include <linux/errno.h> #include <linux/fs.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/miscdevice.h> #include <linux/module.h> |