summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMichał Mirosław <mirq-linux@rere.qmqm.pl>2010-03-21 07:33:08 +0100
committerChris Ball <cjb@laptop.org>2010-10-23 21:11:20 +0800
commit19d614a45ae4beb4712bb50ba3d816ae3fe0f1f2 (patch)
treef3f019eebd38d4fa73100593654d0d6dd4d75e6b
parent703aae3d09a4b351866f1a97b2afafb905bdbf1e (diff)
downloadlinux-3.10-19d614a45ae4beb4712bb50ba3d816ae3fe0f1f2.tar.gz
linux-3.10-19d614a45ae4beb4712bb50ba3d816ae3fe0f1f2.tar.bz2
linux-3.10-19d614a45ae4beb4712bb50ba3d816ae3fe0f1f2.zip
mmc: cb710: partially demystify clock selection
Clock divider selection in partially verified, so document known facts in code. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Chris Ball <cjb@laptop.org>
-rw-r--r--drivers/mmc/host/cb710-mmc.c19
1 files changed, 12 insertions, 7 deletions
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index ca3bdc83190..ad61c4c1107 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -25,7 +25,7 @@ static const u8 cb710_src_freq_mhz[16] = {
50, 55, 60, 65, 70, 75, 80, 85
};
-static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
+static void cb710_mmc_select_clock_divider(struct mmc_host *mmc, int hz)
{
struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
@@ -33,8 +33,11 @@ static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
u32 divider_idx;
int src_hz;
- /* this is magic, unverifiable for me, unless I get
- * MMC card with cables connected to bus signals */
+ /* on CB710 in HP nx9500:
+ * src_freq_idx == 0
+ * indexes 1-7 work as written in the table
+ * indexes 0,8-15 give no clock output
+ */
pci_read_config_dword(pdev, 0x48, &src_freq_idx);
src_freq_idx = (src_freq_idx >> 16) & 0xF;
src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
@@ -46,13 +49,15 @@ static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
if (src_freq_idx)
divider_idx |= 0x8;
+ else if (divider_idx == 0)
+ divider_idx = 1;
cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
dev_dbg(cb710_slot_dev(slot),
- "clock set to %d Hz, wanted %d Hz; flag = %d\n",
+ "clock set to %d Hz, wanted %d Hz; src_freq_idx = %d, divider_idx = %d|%d\n",
src_hz >> cb710_clock_divider_log2[divider_idx & 7],
- hz, (divider_idx & 8) != 0);
+ hz, src_freq_idx, divider_idx & 7, divider_idx & 8);
}
static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
@@ -512,7 +517,7 @@ static int cb710_mmc_powerup(struct cb710_slot *slot)
#endif
int err;
- /* a lot of magic; see comment in cb710_mmc_set_clock() */
+ /* a lot of magic for now */
dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
@@ -572,7 +577,7 @@ static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
struct cb710_mmc_reader *reader = mmc_priv(mmc);
int err;
- cb710_mmc_set_clock(mmc, ios->clock);
+ cb710_mmc_select_clock_divider(mmc, ios->clock);
if (!cb710_mmc_is_card_inserted(slot)) {
dev_dbg(cb710_slot_dev(slot),