diff options
Diffstat (limited to 'docs/howto/device/xu4_tizen.md')
| -rw-r--r-- | docs/howto/device/xu4_tizen.md | 247 |
1 files changed, 0 insertions, 247 deletions
diff --git a/docs/howto/device/xu4_tizen.md b/docs/howto/device/xu4_tizen.md deleted file mode 100644 index 3481be206..000000000 --- a/docs/howto/device/xu4_tizen.md +++ /dev/null @@ -1,247 +0,0 @@ -# About - -This will describe how to flash microSD with Tizen-4.0 for ODroid XU4. - -Host environment is Ubuntu 16.04 - -# Download files - -## Images - -Boot -- https://download.tizen.org/snapshots/tizen/unified/latest/images/standard/tv-boot-armv7l-odroidxu3/ -- download the biggest file - -Root FS -- https://download.tizen.org/snapshots/tizen/unified/latest/images/standard/tv-wayland-armv7l-odroidu3/ -- download the biggest file - -U-Boot images -``` -wget https://github.com/hardkernel/u-boot/raw/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot/bl1.bin.hardkernel -wget https://github.com/hardkernel/u-boot/raw/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot/bl2.bin.hardkernel.1mb_uboot -wget https://github.com/hardkernel/u-boot/raw/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot/tzsw.bin.hardkernel -``` - -You also need `u-boot-mmc.bin` that is inside `tizen-unified_20180425.2_tv-boot-armv7l-odroidxu3.tar.gz` file. -``` -tar xvf tizen-unified_20180425.2_tv-boot-armv7l-odroidxu3.tar.gz u-boot-mmc.bin -``` - - -## Flashing script - -Download `sd_fusing_xu4-u1604.sh` from https://github.sec.samsung.net/RS7-RuntimeNTools/TizenTools/tree/master/sd_fusing_xu4 - -This file is modified to work on Ubuntu 16.04. - -You can download original (What I got in the first place) file as `sd_fusing_xu4.sh` - -Make it executable -``` -chmod u+x sd_fusing_xu4-u1604.sh -``` - - -## Files - -You should see like this -``` --rw-rw-r-- 1 maxwell maxwell 15616 Mar 23 17:11 bl1.bin.hardkernel --rw-rw-r-- 1 maxwell maxwell 14592 Mar 23 17:10 bl2.bin.hardkernel.1mb_uboot --rw-rw-r-- 1 maxwell maxwell 9290646 Apr 26 02:35 tizen-unified_20180425.2_tv-boot-armv7l-odroidxu3.tar.gz --rw-rw-r-- 1 maxwell maxwell 346530499 Apr 26 02:59 tizen-unified_20180425.2_tv-wayland-armv7l-odroidu3.tar.gz --rw-rw-r-- 1 maxwell maxwell 262144 Mar 23 17:11 tzsw.bin.hardkernel --rwxr-xr-x 1 maxwell maxwell 1048576 Apr 26 02:35 u-boot-mmc.bin* -``` - - -# Flash - -Host environment -- Ubuntu 16.04 -- microSD connected through USB Reader as `/dev/sdd` file. - -## Flash boot files - -Give `--format` if it's a new flash memory. -``` -sudo ./sd_fusing_xu4-u1604.sh --format \ --d /dev/sdd \ --b bl1.bin.hardkernel bl2.bin.hardkernel.1mb_uboot tzsw.bin.hardkernel u-boot-mmc.bin -``` -Change `/dev/sdd` to your configuration. - -You will be asked to confirm format when used `--format`. Please type `y` to continue. -``` -/dev/sdd will be formatted, Is it OK? [y/n] -y -``` - -You can omit `--format` from the second time and followings. -``` -sudo ./sd_fusing_xu4-u1604.sh \ --d /dev/sdd \ --b bl1.bin.hardkernel bl2.bin.hardkernel.1mb_uboot tzsw.bin.hardkernel u-boot-mmc.bin -``` -`--format` option will, 1) delete current partition 2) create new partition table, 3) format each partitions. - -- If you meet `./sd_fusing_xu4-u1604.sh: line 147: pv: command not found` message and want to remove this message, install pv package by `sudo apt-get install pv` - -## Flash image files -``` -sudo ./sd_fusing_xu4-u1604.sh -d /dev/sdd \ --b tizen-unified_20180425.2_tv-boot-armv7l-odroidxu3.tar.gz \ -tizen-unified_20180425.2_tv-wayland-armv7l-odroidu3.tar.gz -``` - -# Boot with Tizen 4.0 - -Follow the steps - -Step 1. -- Take out eMMC memory card if you have any - -Step 2. -- Plug-In microSD with Tizen 4.0 - -Step 3. Set boot switch -- Refer https://wiki.odroid.com/odroid-xu4/hardware/hardware -- Set `Boot mode selector` switch on the bottom of the board to `uSD` - -Step 4. Connect Serial Console port with USB of Host computer -- Install `minicom` -``` -sudo apt-get install minicom -``` -- Add yourself to the group `dialout` - - `sudo vi /etc/group` -- Use serial terminal program like `minicom` (note that `/dev/ttyUSB1` might be different in your environment.) -``` -minicom --baudrate 115200 --device /dev/ttyUSB1 -``` -- Use `CTRL-a z o` > `Serial port setup` to enter the dialog -- Baud should be `115200-8N1` -- Set configuration `Hardware Flow Control` to `No` to enable communication(keyboard typing..) -- `Save setup as dfl` in configuration -- If you are connecting from Windows or Mac my need to install the driver - - https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers - - Use `PuTTY` for Windows. - -Step 5. Connect Power -- You should see the boot logs... - -Step 6. Login root -- login `root` pwd `tizen` - -# After boot - -## Slow down the fan speed - -If the fan noise is disturbing, you can slow down a little. - -``` -echo "100" > /sys/devices/platform/pwm-fan/hwmon/hwmon0/pwm1 -``` -This will slow down the speed to 100. Range is from 0 to 255. "0" to make it stop. "255" for maximum speed. - -This value resets after reboot so may have to set the value every time you reboot. - -## Expand root file system - -Default Root FS is 3G but the size shows about the size of the image file, about 700MB. - -There would be not enough space to install files. To overcome this do the following in Tizen root shell. - -``` -mount -o remount,rw / -resize2fs /dev/mmcblk0p2 -sync -``` -And reboot -``` -reboot -``` - -`df` before and after -``` -Filesystem 1K-blocks Used Available Use% Mounted on -/dev/root 754716 721228 8764 99% / -``` -to -``` -Filesystem 1K-blocks Used Available Use% Mounted on -/dev/root 3031952 724724 2282504 25% / -``` - - -## Wide console - -``` -stty cols 200 -``` - -## Setting IP Address of Target Device - -Use `connmanctl` - -**CAUTION** PLEASE DO THIS IN YOUR TARGET DEVICE. RUNNING THIS IN YOUR HOST MAY DAMAGE. - -Step 1. Get the service name -- You first need to connect Ethernet cable. -``` -connmanctl services -``` -Will drop something like this -``` -*AR Wired ethernet_1a43230d5dfa_cable -``` - -Step 2. Use `config` to set the IP address -``` -connmanctl config ethernet_1a43230d5dfa_cable --ipv4 manual 10.113.XXX.YYY 255.255.255.0 10.113.XXX.1 -connmanctl config ethernet_1a43230d5dfa_cable --nameservers 10.32.192.11 10.32.193.11 -``` -where `XXX.YYY` is your address for the target board. - -Setting for proxy can be done with connmanctl but don't know how to check. -``` -connmanctl config ethernet_1a43230d5dfa_cable --proxy manual http://10.112.1.184:8080/ -``` -You can use environment variable but still don't know how to check. - - -This information remains after reboot. - -# Connecting with SDB - -Default Tizen image has running SDBD in the device with default port (26101). - -In your Linux or Windows with `sdb` command, -``` -sdb connect 10.113.XXX.YYY -``` -Result will be something like -``` -* Server is not running. Start it now on port 26099 * -* Server has started successfully * -connecting to 10.113.xxx.yyy:26101 ... -connected to 10.113.xxx.yyy:26101 -``` -With `sdb devices`, -``` -sdb devices -List of devices attached -10.113.xxx.yyy:26101 device xu3 -``` -It comes up with `xu3` as our `xu4` also uses same image `xu3` image. - - -# Known issue -- `ls -al` of root folder shows strange output. - -# Reference -- https://wiki.tizen.org/Quick_guide_for_odroidxu4 -- and the mail got from "κΉμμλ" -- https://magazine.odroid.com/wp-content/uploads/odroid-xu4-user-manual.pdf - - https://magazine.odroid.com/odroid-xu4 |