diff options
Diffstat (limited to 'drivers/isdn/mISDN/dsp_core.c')
| -rw-r--r-- | drivers/isdn/mISDN/dsp_core.c | 1237 |
1 files changed, 1237 insertions, 0 deletions
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c new file mode 100644 index 00000000..6f5b5486 --- /dev/null +++ b/drivers/isdn/mISDN/dsp_core.c @@ -0,0 +1,1237 @@ +/* + * Author Andreas Eversberg (jolly@eversberg.eu) + * Based on source code structure by + * Karsten Keil (keil@isdn4linux.de) + * + * This file is (c) under GNU PUBLIC LICENSE + * For changes and modifications please read + * ../../../Documentation/isdn/mISDN.cert + * + * Thanks to Karsten Keil (great drivers) + * Cologne Chip (great chips) + * + * This module does: + * Real-time tone generation + * DTMF detection + * Real-time cross-connection and conferrence + * Compensate jitter due to system load and hardware fault. + * All features are done in kernel space and will be realized + * using hardware, if available and supported by chip set. + * Blowfish encryption/decryption + */ + +/* STRUCTURE: + * + * The dsp module provides layer 2 for b-channels (64kbit). It provides + * transparent audio forwarding with special digital signal processing: + * + * - (1) generation of tones + * - (2) detection of dtmf tones + * - (3) crossconnecting and conferences (clocking) + * - (4) echo generation for delay test + * - (5) volume control + * - (6) disable receive data + * - (7) pipeline + * - (8) encryption/decryption + * + * Look: + * TX RX + * ------upper layer------ + * | ^ + * | |(6) + * v | + * +-----+-------------+-----+ + * |(3)(4) | + * | CMX | + * | | + * | +-------------+ + * | | ^ + * | | | + * |+---------+| +----+----+ + * ||(1) || |(2) | + * || || | | + * || Tones || | DTMF | + * || || | | + * || || | | + * |+----+----+| +----+----+ + * +-----+-----+ ^ + * | | + * v | + * +----+----+ +----+----+ + * |(5) | |(5) | + * | | | | + * |TX Volume| |RX Volume| + * | | | | + * | | | | + * +----+----+ +----+----+ + * | ^ + * | | + * v | + * +----+-------------+----+ + * |(7) | + * | | + * | Pipeline Processing | + * | | + * | | + * +----+-------------+----+ + * | ^ + * | | + * v | + * +----+----+ +----+----+ + * |(8) | |(8) | + * | | | | + * | Encrypt | | Decrypt | + * | | | | + * | | | | + * +----+----+ +----+----+ + * | ^ + * | | + * v | + * ------card layer------ + * TX RX + * + * Above you can see the logical data flow. If software is used to do the + * process, it is actually the real data flow. If hardware is used, data + * may not flow, but hardware commands to the card, to provide the data flow + * as shown. + * + * NOTE: The channel must be activated in order to make dsp work, even if + * no data flow to the upper layer is intended. Activation can be done + * after and before controlling the setting using PH_CONTROL requests. + * + * DTMF: Will be detected by hardware if possible. It is done before CMX + * processing. + * + * Tones: Will be generated via software if endless looped audio fifos are + * not supported by hardware. Tones will override all data from CMX. + * It is not required to join a conference to use tones at any time. + * + * CMX: Is transparent when not used. When it is used, it will do + * crossconnections and conferences via software if not possible through + * hardware. If hardware capability is available, hardware is used. + * + * Echo: Is generated by CMX and is used to check performance of hard and + * software CMX. + * + * The CMX has special functions for conferences with one, two and more + * members. It will allow different types of data flow. Receive and transmit + * data to/form upper layer may be swithed on/off individually without loosing + * features of CMX, Tones and DTMF. + * + * Echo Cancellation: Sometimes we like to cancel echo from the interface. + * Note that a VoIP call may not have echo caused by the IP phone. The echo + * is generated by the telephone line connected to it. Because the delay + * is high, it becomes an echo. RESULT: Echo Cachelation is required if + * both echo AND delay is applied to an interface. + * Remember that software CMX always generates a more or less delay. + * + * If all used features can be realized in hardware, and if transmit and/or + * receive data ist disabled, the card may not send/receive any data at all. + * Not receiving is usefull if only announcements are played. Not sending is + * usefull if an answering machine records audio. Not sending and receiving is + * usefull during most states of the call. If supported by hardware, tones + * will be played without cpu load. Small PBXs and NT-Mode applications will + * not need expensive hardware when processing calls. + * + * + * LOCKING: + * + * When data is received from upper or lower layer (card), the complete dsp + * module is locked by a global lock. This lock MUST lock irq, because it + * must lock timer events by DSP poll timer. + * When data is ready to be transmitted down, the data is queued and sent + * outside lock and timer event. + * PH_CONTROL must not change any settings, join or split conference members + * during process of data. + * + * HDLC: + * + * It works quite the same as transparent, except that HDLC data is forwarded + * to all other conference members if no hardware bridging is possible. + * Send data will be writte to sendq. Sendq will be sent if confirm is received. + * Conference cannot join, if one member is not hdlc. + * + */ + +#include <linux/delay.h> +#include <linux/gfp.h> +#include <linux/mISDNif.h> +#include <linux/mISDNdsp.h> +#include <linux/module.h> +#include <linux/vmalloc.h> +#include "core.h" +#include "dsp.h" + +static const char *mISDN_dsp_revision = "2.0"; + +static int debug; +static int options; +static int poll; +static int dtmfthreshold = 100; + +MODULE_AUTHOR("Andreas Eversberg"); +module_param(debug, uint, S_IRUGO | S_IWUSR); +module_param(options, uint, S_IRUGO | S_IWUSR); +module_param(poll, uint, S_IRUGO | S_IWUSR); +module_param(dtmfthreshold, uint, S_IRUGO | S_IWUSR); +MODULE_LICENSE("GPL"); + +/*int spinnest = 0;*/ + +spinlock_t dsp_lock; /* global dsp lock */ +struct list_head dsp_ilist; +struct list_head conf_ilist; +int dsp_debug; +int dsp_options; +int dsp_poll, dsp_tics; + +/* check if rx may be turned off or must be turned on */ +static void +dsp_rx_off_member(struct dsp *dsp) +{ + struct mISDN_ctrl_req cq; + int rx_off = 1; + + memset(&cq, 0, sizeof(cq)); + + if (!dsp->features_rx_off) + return; + + /* not disabled */ + if (!dsp->rx_disabled) + rx_off = 0; + /* software dtmf */ + else if (dsp->dtmf.software) + rx_off = 0; + /* echo in software */ + else if (dsp->echo.software) + rx_off = 0; + /* bridge in software */ + else if (dsp->conf && dsp->conf->software) + rx_off = 0; + /* data is not required by user space and not required + * for echo dtmf detection, soft-echo, soft-bridging */ + + if (rx_off == dsp->rx_is_off) + return; + + if (!dsp->ch.peer) { + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: no peer, no rx_off\n", + __func__); + return; + } + cq.op = MISDN_CTRL_RX_OFF; + cq.p1 = rx_off; + if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) { + printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n", + __func__); + return; + } + dsp->rx_is_off = rx_off; + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: %s set rx_off = %d\n", + __func__, dsp->name, rx_off); +} +static void +dsp_rx_off(struct dsp *dsp) +{ + struct dsp_conf_member *member; + + if (dsp_options & DSP_OPT_NOHARDWARE) + return; + + /* no conf */ + if (!dsp->conf) { + dsp_rx_off_member(dsp); + return; + } + /* check all members in conf */ + list_for_each_entry(member, &dsp->conf->mlist, list) { + dsp_rx_off_member(member->dsp); + } +} + +/* enable "fill empty" feature */ +static void +dsp_fill_empty(struct dsp *dsp) +{ + struct mISDN_ctrl_req cq; + + memset(&cq, 0, sizeof(cq)); + + if (!dsp->ch.peer) { + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: no peer, no fill_empty\n", + __func__); + return; + } + cq.op = MISDN_CTRL_FILL_EMPTY; + cq.p1 = 1; + if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) { + printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", + __func__); + return; + } + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: %s set fill_empty = 1\n", + __func__, dsp->name); +} + +static int +dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb) +{ + struct sk_buff *nskb; + int ret = 0; + int cont; + u8 *data; + int len; + + if (skb->len < sizeof(int)) + printk(KERN_ERR "%s: PH_CONTROL message too short\n", __func__); + cont = *((int *)skb->data); + len = skb->len - sizeof(int); + data = skb->data + sizeof(int); + + switch (cont) { + case DTMF_TONE_START: /* turn on DTMF */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: start dtmf\n", __func__); + if (len == sizeof(int)) { + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_NOTICE "changing DTMF Threshold " + "to %d\n", *((int *)data)); + dsp->dtmf.treshold = (*(int *)data) * 10000; + } + dsp->dtmf.enable = 1; + /* init goertzel */ + dsp_dtmf_goertzel_init(dsp); + + /* check dtmf hardware */ + dsp_dtmf_hardware(dsp); + dsp_rx_off(dsp); + break; + case DTMF_TONE_STOP: /* turn off DTMF */ + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: stop dtmf\n", __func__); + dsp->dtmf.enable = 0; + dsp->dtmf.hardware = 0; + dsp->dtmf.software = 0; + break; + case DSP_CONF_JOIN: /* join / update conference */ + if (len < sizeof(int)) { + ret = -EINVAL; + break; + } + if (*((u32 *)data) == 0) + goto conf_split; + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: join conference %d\n", + __func__, *((u32 *)data)); + ret = dsp_cmx_conf(dsp, *((u32 *)data)); + /* dsp_cmx_hardware will also be called here */ + dsp_rx_off(dsp); + if (dsp_debug & DEBUG_DSP_CMX) + dsp_cmx_debug(dsp); + break; + case DSP_CONF_SPLIT: /* remove from conference */ +conf_split: + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: release conference\n", __func__); + ret = dsp_cmx_conf(dsp, 0); + /* dsp_cmx_hardware will also be called here */ + if (dsp_debug & DEBUG_DSP_CMX) + dsp_cmx_debug(dsp); + dsp_rx_off(dsp); + break; + case DSP_TONE_PATT_ON: /* play tone */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + if (len < sizeof(int)) { + ret = -EINVAL; + break; + } + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: turn tone 0x%x on\n", + __func__, *((int *)skb->data)); + ret = dsp_tone(dsp, *((int *)data)); + if (!ret) { + dsp_cmx_hardware(dsp->conf, dsp); + dsp_rx_off(dsp); + } + if (!dsp->tone.tone) + goto tone_off; + break; + case DSP_TONE_PATT_OFF: /* stop tone */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: turn tone off\n", __func__); + dsp_tone(dsp, 0); + dsp_cmx_hardware(dsp->conf, dsp); + dsp_rx_off(dsp); + /* reset tx buffers (user space data) */ +tone_off: + dsp->rx_W = 0; + dsp->rx_R = 0; + break; + case DSP_VOL_CHANGE_TX: /* change volume */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + if (len < sizeof(int)) { + ret = -EINVAL; + break; + } + dsp->tx_volume = *((int *)data); + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: change tx vol to %d\n", + __func__, dsp->tx_volume); + dsp_cmx_hardware(dsp->conf, dsp); + dsp_dtmf_hardware(dsp); + dsp_rx_off(dsp); + break; + case DSP_VOL_CHANGE_RX: /* change volume */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + if (len < sizeof(int)) { + ret = -EINVAL; + break; + } + dsp->rx_volume = *((int *)data); + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: change rx vol to %d\n", + __func__, dsp->tx_volume); + dsp_cmx_hardware(dsp->conf, dsp); + dsp_dtmf_hardware(dsp); + dsp_rx_off(dsp); + break; + case DSP_ECHO_ON: /* enable echo */ + dsp->echo.software = 1; /* soft echo */ + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: enable cmx-echo\n", __func__); + dsp_cmx_hardware(dsp->conf, dsp); + dsp_rx_off(dsp); + if (dsp_debug & DEBUG_DSP_CMX) + dsp_cmx_debug(dsp); + break; + case DSP_ECHO_OFF: /* disable echo */ + dsp->echo.software = 0; + dsp->echo.hardware = 0; + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: disable cmx-echo\n", __func__); + dsp_cmx_hardware(dsp->conf, dsp); + dsp_rx_off(dsp); + if (dsp_debug & DEBUG_DSP_CMX) + dsp_cmx_debug(dsp); + break; + case DSP_RECEIVE_ON: /* enable receive to user space */ + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: enable receive to user " + "space\n", __func__); + dsp->rx_disabled = 0; + dsp_rx_off(dsp); + break; + case DSP_RECEIVE_OFF: /* disable receive to user space */ + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: disable receive to " + "user space\n", __func__); + dsp->rx_disabled = 1; + dsp_rx_off(dsp); + break; + case DSP_MIX_ON: /* enable mixing of tx data */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: enable mixing of " + "tx-data with conf mebers\n", __func__); + dsp->tx_mix = 1; + dsp_cmx_hardware(dsp->conf, dsp); + dsp_rx_off(dsp); + if (dsp_debug & DEBUG_DSP_CMX) + dsp_cmx_debug(dsp); + break; + case DSP_MIX_OFF: /* disable mixing of tx data */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: disable mixing of " + "tx-data with conf mebers\n", __func__); + dsp->tx_mix = 0; + dsp_cmx_hardware(dsp->conf, dsp); + dsp_rx_off(dsp); + if (dsp_debug & DEBUG_DSP_CMX) + dsp_cmx_debug(dsp); + break; + case DSP_TXDATA_ON: /* enable txdata */ + dsp->tx_data = 1; + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: enable tx-data\n", __func__); + dsp_cmx_hardware(dsp->conf, dsp); + dsp_rx_off(dsp); + if (dsp_debug & DEBUG_DSP_CMX) + dsp_cmx_debug(dsp); + break; + case DSP_TXDATA_OFF: /* disable txdata */ + dsp->tx_data = 0; + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: disable tx-data\n", __func__); + dsp_cmx_hardware(dsp->conf, dsp); + dsp_rx_off(dsp); + if (dsp_debug & DEBUG_DSP_CMX) + dsp_cmx_debug(dsp); + break; + case DSP_DELAY: /* use delay algorithm instead of dynamic + jitter algorithm */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + if (len < sizeof(int)) { + ret = -EINVAL; + break; + } + dsp->cmx_delay = (*((int *)data)) << 3; + /* milliseconds to samples */ + if (dsp->cmx_delay >= (CMX_BUFF_HALF>>1)) + /* clip to half of maximum usable buffer + (half of half buffer) */ + dsp->cmx_delay = (CMX_BUFF_HALF>>1) - 1; + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: use delay algorithm to " + "compensate jitter (%d samples)\n", + __func__, dsp->cmx_delay); + break; + case DSP_JITTER: /* use dynamic jitter algorithm instead of + delay algorithm */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + dsp->cmx_delay = 0; + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: use jitter algorithm to " + "compensate jitter\n", __func__); + break; + case DSP_TX_DEJITTER: /* use dynamic jitter algorithm for tx-buffer */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + dsp->tx_dejitter = 1; + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: use dejitter on TX " + "buffer\n", __func__); + break; + case DSP_TX_DEJ_OFF: /* use tx-buffer without dejittering*/ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + dsp->tx_dejitter = 0; + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: use TX buffer without " + "dejittering\n", __func__); + break; + case DSP_PIPELINE_CFG: + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + if (len > 0 && ((char *)data)[len - 1]) { + printk(KERN_DEBUG "%s: pipeline config string " + "is not NULL terminated!\n", __func__); + ret = -EINVAL; + } else { + dsp->pipeline.inuse = 1; + dsp_cmx_hardware(dsp->conf, dsp); + ret = dsp_pipeline_build(&dsp->pipeline, + len > 0 ? data : NULL); + dsp_cmx_hardware(dsp->conf, dsp); + dsp_rx_off(dsp); + } + break; + case DSP_BF_ENABLE_KEY: /* turn blowfish on */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + if (len < 4 || len > 56) { + ret = -EINVAL; + break; + } + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: turn blowfish on (key " + "not shown)\n", __func__); + ret = dsp_bf_init(dsp, (u8 *)data, len); + /* set new cont */ + if (!ret) + cont = DSP_BF_ACCEPT; + else + cont = DSP_BF_REJECT; + /* send indication if it worked to set it */ + nskb = _alloc_mISDN_skb(PH_CONTROL_IND, MISDN_ID_ANY, + sizeof(int), &cont, GFP_ATOMIC); + if (nskb) { + if (dsp->up) { + if (dsp->up->send(dsp->up, nskb)) + dev_kfree_skb(nskb); + } else + dev_kfree_skb(nskb); + } + if (!ret) { + dsp_cmx_hardware(dsp->conf, dsp); + dsp_dtmf_hardware(dsp); + dsp_rx_off(dsp); + } + break; + case DSP_BF_DISABLE: /* turn blowfish off */ + if (dsp->hdlc) { + ret = -EINVAL; + break; + } + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: turn blowfish off\n", __func__); + dsp_bf_cleanup(dsp); + dsp_cmx_hardware(dsp->conf, dsp); + dsp_dtmf_hardware(dsp); + dsp_rx_off(dsp); + break; + default: + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: ctrl req %x unhandled\n", + __func__, cont); + ret = -EINVAL; + } + return ret; +} + +static void +get_features(struct mISDNchannel *ch) +{ + struct dsp *dsp = container_of(ch, struct dsp, ch); + struct mISDN_ctrl_req cq; + + if (!ch->peer) { + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: no peer, no features\n", + __func__); + return; + } + memset(&cq, 0, sizeof(cq)); + cq.op = MISDN_CTRL_GETOP; + if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq) < 0) { + printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", + __func__); + return; + } + if (cq.op & MISDN_CTRL_RX_OFF) + dsp->features_rx_off = 1; + if (cq.op & MISDN_CTRL_FILL_EMPTY) + dsp->features_fill_empty = 1; + if (dsp_options & DSP_OPT_NOHARDWARE) + return; + if ((cq.op & MISDN_CTRL_HW_FEATURES_OP)) { + cq.op = MISDN_CTRL_HW_FEATURES; + *((u_long *)&cq.p1) = (u_long)&dsp->features; + if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq)) { + printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n", + __func__); + } + } else + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: features not supported for %s\n", + __func__, dsp->name); +} + +static int +dsp_function(struct mISDNchannel *ch, struct sk_buff *skb) +{ + struct dsp *dsp = container_of(ch, struct dsp, ch); + struct mISDNhead *hh; + int ret = 0; + u8 *digits = NULL; + u_long flags; + + hh = mISDN_HEAD_P(skb); + switch (hh->prim) { + /* FROM DOWN */ + case (PH_DATA_CNF): + dsp->data_pending = 0; + /* trigger next hdlc frame, if any */ + if (dsp->hdlc) { + spin_lock_irqsave(&dsp_lock, flags); + if (dsp->b_active) + schedule_work(&dsp->workq); + spin_unlock_irqrestore(&dsp_lock, flags); + } + break; + case (PH_DATA_IND): + case (DL_DATA_IND): + if (skb->len < 1) { + ret = -EINVAL; + break; + } + if (dsp->rx_is_off) { + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: rx-data during rx_off" + " for %s\n", + __func__, dsp->name); + } + if (dsp->hdlc) { + /* hdlc */ + spin_lock_irqsave(&dsp_lock, flags); + dsp_cmx_hdlc(dsp, skb); + spin_unlock_irqrestore(&dsp_lock, flags); + if (dsp->rx_disabled) { + /* if receive is not allowed */ + break; + } + hh->prim = DL_DATA_IND; + if (dsp->up) + return dsp->up->send(dsp->up, skb); + break; + } + + spin_lock_irqsave(&dsp_lock, flags); + + /* decrypt if enabled */ + if (dsp->bf_enable) + dsp_bf_decrypt(dsp, skb->data, skb->len); + /* pipeline */ + if (dsp->pipeline.inuse) + dsp_pipeline_process_rx(&dsp->pipeline, skb->data, + skb->len, hh->id); + /* change volume if requested */ + if (dsp->rx_volume) + dsp_change_volume(skb, dsp->rx_volume); + /* check if dtmf soft decoding is turned on */ + if (dsp->dtmf.software) { + digits = dsp_dtmf_goertzel_decode(dsp, skb->data, + skb->len, (dsp_options&DSP_OPT_ULAW) ? 1 : 0); + } + /* we need to process receive data if software */ + if (dsp->conf && dsp->conf->software) { + /* process data from card at cmx */ + dsp_cmx_receive(dsp, skb); + } + + spin_unlock_irqrestore(&dsp_lock, flags); + + /* send dtmf result, if any */ + if (digits) { + while (*digits) { + int k; + struct sk_buff *nskb; + if (dsp_debug & DEBUG_DSP_DTMF) + printk(KERN_DEBUG "%s: digit" + "(%c) to layer %s\n", + __func__, *digits, dsp->name); + k = *digits | DTMF_TONE_VAL; + nskb = _alloc_mISDN_skb(PH_CONTROL_IND, + MISDN_ID_ANY, sizeof(int), &k, + GFP_ATOMIC); + if (nskb) { + if (dsp->up) { + if (dsp->up->send( + dsp->up, nskb)) + dev_kfree_skb(nskb); + } else + dev_kfree_skb(nskb); + } + digits++; + } + } + if (dsp->rx_disabled) { + /* if receive is not allowed */ + break; + } + hh->prim = DL_DATA_IND; + if (dsp->up) + return dsp->up->send(dsp->up, skb); + break; + case (PH_CONTROL_IND): + if (dsp_debug & DEBUG_DSP_DTMFCOEFF) + printk(KERN_DEBUG "%s: PH_CONTROL INDICATION " + "received: %x (len %d) %s\n", __func__, + hh->id, skb->len, dsp->name); + switch (hh->id) { + case (DTMF_HFC_COEF): /* getting coefficients */ + if (!dsp->dtmf.hardware) { + if (dsp_debug & DEBUG_DSP_DTMFCOEFF) + printk(KERN_DEBUG "%s: ignoring DTMF " + "coefficients from HFC\n", + __func__); + break; + } + digits = dsp_dtmf_goertzel_decode(dsp, skb->data, + skb->len, 2); + while (*digits) { + int k; + struct sk_buff *nskb; + if (dsp_debug & DEBUG_DSP_DTMF) + printk(KERN_DEBUG "%s: digit" + "(%c) to layer %s\n", + __func__, *digits, dsp->name); + k = *digits | DTMF_TONE_VAL; + nskb = _alloc_mISDN_skb(PH_CONTROL_IND, + MISDN_ID_ANY, sizeof(int), &k, + GFP_ATOMIC); + if (nskb) { + if (dsp->up) { + if (dsp->up->send( + dsp->up, nskb)) + dev_kfree_skb(nskb); + } else + dev_kfree_skb(nskb); + } + digits++; + } + break; + case (HFC_VOL_CHANGE_TX): /* change volume */ + if (skb->len != sizeof(int)) { + ret = -EINVAL; + break; + } + spin_lock_irqsave(&dsp_lock, flags); + dsp->tx_volume = *((int *)skb->data); + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: change tx volume to " + "%d\n", __func__, dsp->tx_volume); + dsp_cmx_hardware(dsp->conf, dsp); + dsp_dtmf_hardware(dsp); + dsp_rx_off(dsp); + spin_unlock_irqrestore(&dsp_lock, flags); + break; + default: + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: ctrl ind %x unhandled " + "%s\n", __func__, hh->id, dsp->name); + ret = -EINVAL; + } + break; + case (PH_ACTIVATE_IND): + case (PH_ACTIVATE_CNF): + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: b_channel is now active %s\n", + __func__, dsp->name); + /* bchannel now active */ + spin_lock_irqsave(&dsp_lock, flags); + dsp->b_active = 1; + dsp->data_pending = 0; + dsp->rx_init = 1; + /* rx_W and rx_R will be adjusted on first frame */ + dsp->rx_W = 0; + dsp->rx_R = 0; + memset(dsp->rx_buff, 0, sizeof(dsp->rx_buff)); + dsp_cmx_hardware(dsp->conf, dsp); + dsp_dtmf_hardware(dsp); + dsp_rx_off(dsp); + spin_unlock_irqrestore(&dsp_lock, flags); + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: done with activation, sending " + "confirm to user space. %s\n", __func__, + dsp->name); + /* send activation to upper layer */ + hh->prim = DL_ESTABLISH_CNF; + if (dsp->up) + return dsp->up->send(dsp->up, skb); + break; + case (PH_DEACTIVATE_IND): + case (PH_DEACTIVATE_CNF): + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: b_channel is now inactive %s\n", + __func__, dsp->name); + /* bchannel now inactive */ + spin_lock_irqsave(&dsp_lock, flags); + dsp->b_active = 0; + dsp->data_pending = 0; + dsp_cmx_hardware(dsp->conf, dsp); + dsp_rx_off(dsp); + spin_unlock_irqrestore(&dsp_lock, flags); + hh->prim = DL_RELEASE_CNF; + if (dsp->up) + return dsp->up->send(dsp->up, skb); + break; + /* FROM UP */ + case (DL_DATA_REQ): + case (PH_DATA_REQ): + if (skb->len < 1) { + ret = -EINVAL; + break; + } + if (dsp->hdlc) { + /* hdlc */ + if (!dsp->b_active) { + ret = -EIO; + break; + } + hh->prim = PH_DATA_REQ; + spin_lock_irqsave(&dsp_lock, flags); + skb_queue_tail(&dsp->sendq, skb); + schedule_work(&dsp->workq); + spin_unlock_irqrestore(&dsp_lock, flags); + return 0; + } + /* send data to tx-buffer (if no tone is played) */ + if (!dsp->tone.tone) { + spin_lock_irqsave(&dsp_lock, flags); + dsp_cmx_transmit(dsp, skb); + spin_unlock_irqrestore(&dsp_lock, flags); + } + break; + case (PH_CONTROL_REQ): + spin_lock_irqsave(&dsp_lock, flags); + ret = dsp_control_req(dsp, hh, skb); + spin_unlock_irqrestore(&dsp_lock, flags); + break; + case (DL_ESTABLISH_REQ): + case (PH_ACTIVATE_REQ): + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: activating b_channel %s\n", + __func__, dsp->name); + if (dsp->dtmf.hardware || dsp->dtmf.software) + dsp_dtmf_goertzel_init(dsp); + get_features(ch); + /* enable fill_empty feature */ + if (dsp->features_fill_empty) + dsp_fill_empty(dsp); + /* send ph_activate */ + hh->prim = PH_ACTIVATE_REQ; + if (ch->peer) + return ch->recv(ch->peer, skb); + break; + case (DL_RELEASE_REQ): + case (PH_DEACTIVATE_REQ): + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: releasing b_channel %s\n", + __func__, dsp->name); + spin_lock_irqsave(&dsp_lock, flags); + dsp->tone.tone = 0; + dsp->tone.hardware = 0; + dsp->tone.software = 0; + if (timer_pending(&dsp->tone.tl)) + del_timer(&dsp->tone.tl); + if (dsp->conf) + dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be + called here */ + skb_queue_purge(&dsp->sendq); + spin_unlock_irqrestore(&dsp_lock, flags); + hh->prim = PH_DEACTIVATE_REQ; + if (ch->peer) + return ch->recv(ch->peer, skb); + break; + default: + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: msg %x unhandled %s\n", + __func__, hh->prim, dsp->name); + ret = -EINVAL; + } + if (!ret) + dev_kfree_skb(skb); + return ret; +} + +static int +dsp_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg) +{ + struct dsp *dsp = container_of(ch, struct dsp, ch); + u_long flags; + int err = 0; + + if (debug & DEBUG_DSP_CTRL) + printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd); + + switch (cmd) { + case OPEN_CHANNEL: + break; + case CLOSE_CHANNEL: + if (dsp->ch.peer) + dsp->ch.peer->ctrl(dsp->ch.peer, CLOSE_CHANNEL, NULL); + + /* wait until workqueue has finished, + * must lock here, or we may hit send-process currently + * queueing. */ + spin_lock_irqsave(&dsp_lock, flags); + dsp->b_active = 0; + spin_unlock_irqrestore(&dsp_lock, flags); + /* MUST not be locked, because it waits until queue is done. */ + cancel_work_sync(&dsp->workq); + spin_lock_irqsave(&dsp_lock, flags); + if (timer_pending(&dsp->tone.tl)) + del_timer(&dsp->tone.tl); + skb_queue_purge(&dsp->sendq); + if (dsp_debug & DEBUG_DSP_CTRL) + printk(KERN_DEBUG "%s: releasing member %s\n", + __func__, dsp->name); + dsp->b_active = 0; + dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be called + here */ + dsp_pipeline_destroy(&dsp->pipeline); + + if (dsp_debug & DEBUG_DSP_CTRL) + printk(KERN_DEBUG "%s: remove & destroy object %s\n", + __func__, dsp->name); + list_del(&dsp->list); + spin_unlock_irqrestore(&dsp_lock, flags); + + if (dsp_debug & DEBUG_DSP_CTRL) + printk(KERN_DEBUG "%s: dsp instance released\n", + __func__); + vfree(dsp); + module_put(THIS_MODULE); + break; + } + return err; +} + +static void +dsp_send_bh(struct work_struct *work) +{ + struct dsp *dsp = container_of(work, struct dsp, workq); + struct sk_buff *skb; + struct mISDNhead *hh; + + if (dsp->hdlc && dsp->data_pending) + return; /* wait until data has been acknowledged */ + + /* send queued data */ + while ((skb = skb_dequeue(&dsp->sendq))) { + /* in locked date, we must have still data in queue */ + if (dsp->data_pending) { + if (dsp_debug & DEBUG_DSP_CORE) + printk(KERN_DEBUG "%s: fifo full %s, this is " + "no bug!\n", __func__, dsp->name); + /* flush transparent data, if not acked */ + dev_kfree_skb(skb); + continue; + } + hh = mISDN_HEAD_P(skb); + if (hh->prim == DL_DATA_REQ) { + /* send packet up */ + if (dsp->up) { + if (dsp->up->send(dsp->up, skb)) + dev_kfree_skb(skb); + } else + dev_kfree_skb(skb); + } else { + /* send packet down */ + if (dsp->ch.peer) { + dsp->data_pending = 1; + if (dsp->ch.recv(dsp->ch.peer, skb)) { + dev_kfree_skb(skb); + dsp->data_pending = 0; + } + } else + dev_kfree_skb(skb); + } + } +} + +static int +dspcreate(struct channel_req *crq) +{ + struct dsp *ndsp; + u_long flags; + + if (crq->protocol != ISDN_P_B_L2DSP + && crq->protocol != ISDN_P_B_L2DSPHDLC) + return -EPROTONOSUPPORT; + ndsp = vmalloc(sizeof(struct dsp)); + if (!ndsp) { + printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__); + return -ENOMEM; + } + memset(ndsp, 0, sizeof(struct dsp)); + if (dsp_debug & DEBUG_DSP_CTRL) + printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__); + + /* default enabled */ + INIT_WORK(&ndsp->workq, (void *)dsp_send_bh); + skb_queue_head_init(&ndsp->sendq); + ndsp->ch.send = dsp_function; + ndsp->ch.ctrl = dsp_ctrl; + ndsp->up = crq->ch; + crq->ch = &ndsp->ch; + if (crq->protocol == ISDN_P_B_L2DSP) { + crq->protocol = ISDN_P_B_RAW; + ndsp->hdlc = 0; + } else { + crq->protocol = ISDN_P_B_HDLC; + ndsp->hdlc = 1; + } + if (!try_module_get(THIS_MODULE)) + printk(KERN_WARNING "%s:cannot get module\n", + __func__); + + sprintf(ndsp->name, "DSP_C%x(0x%p)", + ndsp->up->st->dev->id + 1, ndsp); + /* set frame size to start */ + ndsp->features.hfc_id = -1; /* current PCM id */ + ndsp->features.pcm_id = -1; /* current PCM id */ + ndsp->pcm_slot_rx = -1; /* current CPM slot */ + ndsp->pcm_slot_tx = -1; + ndsp->pcm_bank_rx = -1; + ndsp->pcm_bank_tx = -1; + ndsp->hfc_conf = -1; /* current conference number */ + /* set tone timer */ + ndsp->tone.tl.function = (void *)dsp_tone_timeout; + ndsp->tone.tl.data = (long) ndsp; + init_timer(&ndsp->tone.tl); + + if (dtmfthreshold < 20 || dtmfthreshold > 500) + dtmfthreshold = 200; + ndsp->dtmf.treshold = dtmfthreshold*10000; + + /* init pipeline append to list */ + spin_lock_irqsave(&dsp_lock, flags); + dsp_pipeline_init(&ndsp->pipeline); + list_add_tail(&ndsp->list, &dsp_ilist); + spin_unlock_irqrestore(&dsp_lock, flags); + + return 0; +} + + +static struct Bprotocol DSP = { + .Bprotocols = (1 << (ISDN_P_B_L2DSP & ISDN_P_B_MASK)) + | (1 << (ISDN_P_B_L2DSPHDLC & ISDN_P_B_MASK)), + .name = "dsp", + .create = dspcreate +}; + +static int __init dsp_init(void) +{ + int err; + int tics; + + printk(KERN_INFO "DSP modul %s\n", mISDN_dsp_revision); + + dsp_options = options; + dsp_debug = debug; + + /* set packet size */ + dsp_poll = poll; + if (dsp_poll) { + if (dsp_poll > MAX_POLL) { + printk(KERN_ERR "%s: Wrong poll value (%d), use %d " + "maximum.\n", __func__, poll, MAX_POLL); + err = -EINVAL; + return err; + } + if (dsp_poll < 8) { + printk(KERN_ERR "%s: Wrong poll value (%d), use 8 " + "minimum.\n", __func__, dsp_poll); + err = -EINVAL; + return err; + } + dsp_tics = poll * HZ / 8000; + if (dsp_tics * 8000 != poll * HZ) { + printk(KERN_INFO "mISDN_dsp: Cannot clock every %d " + "samples (0,125 ms). It is not a multiple of " + "%d HZ.\n", poll, HZ); + err = -EINVAL; + return err; + } + } else { + poll = 8; + while (poll <= MAX_POLL) { + tics = (poll * HZ) / 8000; + if (tics * 8000 == poll * HZ) { + dsp_tics = tics; + dsp_poll = poll; + if (poll >= 64) + break; + } + poll++; + } + } + if (dsp_poll == 0) { + printk(KERN_INFO "mISDN_dsp: There is no multiple of kernel " + "clock that equals exactly the duration of 8-256 " + "samples. (Choose kernel clock speed like 100, 250, " + "300, 1000)\n"); + err = -EINVAL; + return err; + } + printk(KERN_INFO "mISDN_dsp: DSP clocks every %d samples. This equals " + "%d jiffies.\n", dsp_poll, dsp_tics); + + spin_lock_init(&dsp_lock); + INIT_LIST_HEAD(&dsp_ilist); + INIT_LIST_HEAD(&conf_ilist); + + /* init conversion tables */ + dsp_audio_generate_law_tables(); + dsp_silence = (dsp_options&DSP_OPT_ULAW) ? 0xff : 0x2a; + dsp_audio_law_to_s32 = (dsp_options&DSP_OPT_ULAW) ? + dsp_audio_ulaw_to_s32 : dsp_audio_alaw_to_s32; + dsp_audio_generate_s2law_table(); + dsp_audio_generate_seven(); + dsp_audio_generate_mix_table(); + if (dsp_options & DSP_OPT_ULAW) + dsp_audio_generate_ulaw_samples(); + dsp_audio_generate_volume_changes(); + + err = dsp_pipeline_module_init(); + if (err) { + printk(KERN_ERR "mISDN_dsp: Can't initialize pipeline, " + "error(%d)\n", err); + return err; + } + + err = mISDN_register_Bprotocol(&DSP); + if (err) { + printk(KERN_ERR "Can't register %s error(%d)\n", DSP.name, err); + return err; + } + + /* set sample timer */ + dsp_spl_tl.function = (void *)dsp_cmx_send; + dsp_spl_tl.data = 0; + init_timer(&dsp_spl_tl); + dsp_spl_tl.expires = jiffies + dsp_tics; + dsp_spl_jiffies = dsp_spl_tl.expires; + add_timer(&dsp_spl_tl); + + return 0; +} + + +static void __exit dsp_cleanup(void) +{ + mISDN_unregister_Bprotocol(&DSP); + + if (timer_pending(&dsp_spl_tl)) + del_timer(&dsp_spl_tl); + + if (!list_empty(&dsp_ilist)) { + printk(KERN_ERR "mISDN_dsp: Audio DSP object inst list not " + "empty.\n"); + } + if (!list_empty(&conf_ilist)) { + printk(KERN_ERR "mISDN_dsp: Conference list not empty. Not " + "all memory freed.\n"); + } + + dsp_pipeline_module_exit(); +} + +module_init(dsp_init); +module_exit(dsp_cleanup); + |