diff options
Diffstat (limited to 'Documentation/scheduler')
| -rw-r--r-- | Documentation/scheduler/00-INDEX | 14 | ||||
| -rw-r--r-- | Documentation/scheduler/sched-arch.txt | 89 | ||||
| -rw-r--r-- | Documentation/scheduler/sched-design-CFS.txt | 248 | ||||
| -rw-r--r-- | Documentation/scheduler/sched-domains.txt | 67 | ||||
| -rw-r--r-- | Documentation/scheduler/sched-nice-design.txt | 108 | ||||
| -rw-r--r-- | Documentation/scheduler/sched-rt-group.txt | 184 | ||||
| -rw-r--r-- | Documentation/scheduler/sched-stats.txt | 156 |
7 files changed, 866 insertions, 0 deletions
diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX new file mode 100644 index 00000000..3c00c9c3 --- /dev/null +++ b/Documentation/scheduler/00-INDEX @@ -0,0 +1,14 @@ +00-INDEX + - this file. +sched-arch.txt + - CPU Scheduler implementation hints for architecture specific code. +sched-design-CFS.txt + - goals, design and implementation of the Complete Fair Scheduler. +sched-domains.txt + - information on scheduling domains. +sched-nice-design.txt + - How and why the scheduler's nice levels are implemented. +sched-rt-group.txt + - real-time group scheduling. +sched-stats.txt + - information on schedstats (Linux Scheduler Statistics). diff --git a/Documentation/scheduler/sched-arch.txt b/Documentation/scheduler/sched-arch.txt new file mode 100644 index 00000000..d43dbcbd --- /dev/null +++ b/Documentation/scheduler/sched-arch.txt @@ -0,0 +1,89 @@ + CPU Scheduler implementation hints for architecture specific code + + Nick Piggin, 2005 + +Context switch +============== +1. Runqueue locking +By default, the switch_to arch function is called with the runqueue +locked. This is usually not a problem unless switch_to may need to +take the runqueue lock. This is usually due to a wake up operation in +the context switch. See arch/ia64/include/asm/system.h for an example. + +To request the scheduler call switch_to with the runqueue unlocked, +you must `#define __ARCH_WANT_UNLOCKED_CTXSW` in a header file +(typically the one where switch_to is defined). + +Unlocked context switches introduce only a very minor performance +penalty to the core scheduler implementation in the CONFIG_SMP case. + +2. Interrupt status +By default, the switch_to arch function is called with interrupts +disabled. Interrupts may be enabled over the call if it is likely to +introduce a significant interrupt latency by adding the line +`#define __ARCH_WANT_INTERRUPTS_ON_CTXSW` in the same place as for +unlocked context switches. This define also implies +`__ARCH_WANT_UNLOCKED_CTXSW`. See arch/arm/include/asm/system.h for an +example. + + +CPU idle +======== +Your cpu_idle routines need to obey the following rules: + +1. Preempt should now disabled over idle routines. Should only + be enabled to call schedule() then disabled again. + +2. need_resched/TIF_NEED_RESCHED is only ever set, and will never + be cleared until the running task has called schedule(). Idle + threads need only ever query need_resched, and may never set or + clear it. + +3. When cpu_idle finds (need_resched() == 'true'), it should call + schedule(). It should not call schedule() otherwise. + +4. The only time interrupts need to be disabled when checking + need_resched is if we are about to sleep the processor until + the next interrupt (this doesn't provide any protection of + need_resched, it prevents losing an interrupt). + + 4a. Common problem with this type of sleep appears to be: + local_irq_disable(); + if (!need_resched()) { + local_irq_enable(); + *** resched interrupt arrives here *** + __asm__("sleep until next interrupt"); + } + +5. TIF_POLLING_NRFLAG can be set by idle routines that do not + need an interrupt to wake them up when need_resched goes high. + In other words, they must be periodically polling need_resched, + although it may be reasonable to do some background work or enter + a low CPU priority. + + 5a. If TIF_POLLING_NRFLAG is set, and we do decide to enter + an interrupt sleep, it needs to be cleared then a memory + barrier issued (followed by a test of need_resched with + interrupts disabled, as explained in 3). + +arch/i386/kernel/process.c has examples of both polling and +sleeping idle functions. + + +Possible arch/ problems +======================= + +Possible arch problems I found (and either tried to fix or didn't): + +h8300 - Is such sleeping racy vs interrupts? (See #4a). + The H8/300 manual I found indicates yes, however disabling IRQs + over the sleep mean only NMIs can wake it up, so can't fix easily + without doing spin waiting. + +ia64 - is safe_halt call racy vs interrupts? (does it sleep?) (See #4a) + +sh64 - Is sleeping racy vs interrupts? (See #4a) + +sparc - IRQs on at this point(?), change local_irq_save to _disable. + - TODO: needs secondary CPUs to disable preempt (See #1) + diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt new file mode 100644 index 00000000..8239ebbc --- /dev/null +++ b/Documentation/scheduler/sched-design-CFS.txt @@ -0,0 +1,248 @@ + ============= + CFS Scheduler + ============= + + +1. OVERVIEW + +CFS stands for "Completely Fair Scheduler," and is the new "desktop" process +scheduler implemented by Ingo Molnar and merged in Linux 2.6.23. It is the +replacement for the previous vanilla scheduler's SCHED_OTHER interactivity +code. + +80% of CFS's design can be summed up in a single sentence: CFS basically models +an "ideal, precise multi-tasking CPU" on real hardware. + +"Ideal multi-tasking CPU" is a (non-existent :-)) CPU that has 100% physical +power and which can run each task at precise equal speed, in parallel, each at +1/nr_running speed. For example: if there are 2 tasks running, then it runs +each at 50% physical power --- i.e., actually in parallel. + +On real hardware, we can run only a single task at once, so we have to +introduce the concept of "virtual runtime." The virtual runtime of a task +specifies when its next timeslice would start execution on the ideal +multi-tasking CPU described above. In practice, the virtual runtime of a task +is its actual runtime normalized to the total number of running tasks. + + + +2. FEW IMPLEMENTATION DETAILS + +In CFS the virtual runtime is expressed and tracked via the per-task +p->se.vruntime (nanosec-unit) value. This way, it's possible to accurately +timestamp and measure the "expected CPU time" a task should have gotten. + +[ small detail: on "ideal" hardware, at any time all tasks would have the same + p->se.vruntime value --- i.e., tasks would execute simultaneously and no task + would ever get "out of balance" from the "ideal" share of CPU time. ] + +CFS's task picking logic is based on this p->se.vruntime value and it is thus +very simple: it always tries to run the task with the smallest p->se.vruntime +value (i.e., the task which executed least so far). CFS always tries to split +up CPU time between runnable tasks as close to "ideal multitasking hardware" as +possible. + +Most of the rest of CFS's design just falls out of this really simple concept, +with a few add-on embellishments like nice levels, multiprocessing and various +algorithm variants to recognize sleepers. + + + +3. THE RBTREE + +CFS's design is quite radical: it does not use the old data structures for the +runqueues, but it uses a time-ordered rbtree to build a "timeline" of future +task execution, and thus has no "array switch" artifacts (by which both the +previous vanilla scheduler and RSDL/SD are affected). + +CFS also maintains the rq->cfs.min_vruntime value, which is a monotonic +increasing value tracking the smallest vruntime among all tasks in the +runqueue. The total amount of work done by the system is tracked using +min_vruntime; that value is used to place newly activated entities on the left +side of the tree as much as possible. + +The total number of running tasks in the runqueue is accounted through the +rq->cfs.load value, which is the sum of the weights of the tasks queued on the +runqueue. + +CFS maintains a time-ordered rbtree, where all runnable tasks are sorted by the +p->se.vruntime key (there is a subtraction using rq->cfs.min_vruntime to +account for possible wraparounds). CFS picks the "leftmost" task from this +tree and sticks to it. +As the system progresses forwards, the executed tasks are put into the tree +more and more to the right --- slowly but surely giving a chance for every task +to become the "leftmost task" and thus get on the CPU within a deterministic +amount of time. + +Summing up, CFS works like this: it runs a task a bit, and when the task +schedules (or a scheduler tick happens) the task's CPU usage is "accounted +for": the (small) time it just spent using the physical CPU is added to +p->se.vruntime. Once p->se.vruntime gets high enough so that another task +becomes the "leftmost task" of the time-ordered rbtree it maintains (plus a +small amount of "granularity" distance relative to the leftmost task so that we +do not over-schedule tasks and trash the cache), then the new leftmost task is +picked and the current task is preempted. + + + +4. SOME FEATURES OF CFS + +CFS uses nanosecond granularity accounting and does not rely on any jiffies or +other HZ detail. Thus the CFS scheduler has no notion of "timeslices" in the +way the previous scheduler had, and has no heuristics whatsoever. There is +only one central tunable (you have to switch on CONFIG_SCHED_DEBUG): + + /proc/sys/kernel/sched_min_granularity_ns + +which can be used to tune the scheduler from "desktop" (i.e., low latencies) to +"server" (i.e., good batching) workloads. It defaults to a setting suitable +for desktop workloads. SCHED_BATCH is handled by the CFS scheduler module too. + +Due to its design, the CFS scheduler is not prone to any of the "attacks" that +exist today against the heuristics of the stock scheduler: fiftyp.c, thud.c, +chew.c, ring-test.c, massive_intr.c all work fine and do not impact +interactivity and produce the expected behavior. + +The CFS scheduler has a much stronger handling of nice levels and SCHED_BATCH +than the previous vanilla scheduler: both types of workloads are isolated much +more aggressively. + +SMP load-balancing has been reworked/sanitized: the runqueue-walking +assumptions are gone from the load-balancing code now, and iterators of the +scheduling modules are used. The balancing code got quite a bit simpler as a +result. + + + +5. Scheduling policies + +CFS implements three scheduling policies: + + - SCHED_NORMAL (traditionally called SCHED_OTHER): The scheduling + policy that is used for regular tasks. + + - SCHED_BATCH: Does not preempt nearly as often as regular tasks + would, thereby allowing tasks to run longer and make better use of + caches but at the cost of interactivity. This is well suited for + batch jobs. + + - SCHED_IDLE: This is even weaker than nice 19, but its not a true + idle timer scheduler in order to avoid to get into priority + inversion problems which would deadlock the machine. + +SCHED_FIFO/_RR are implemented in sched_rt.c and are as specified by +POSIX. + +The command chrt from util-linux-ng 2.13.1.1 can set all of these except +SCHED_IDLE. + + + +6. SCHEDULING CLASSES + +The new CFS scheduler has been designed in such a way to introduce "Scheduling +Classes," an extensible hierarchy of scheduler modules. These modules +encapsulate scheduling policy details and are handled by the scheduler core +without the core code assuming too much about them. + +sched_fair.c implements the CFS scheduler described above. + +sched_rt.c implements SCHED_FIFO and SCHED_RR semantics, in a simpler way than +the previous vanilla scheduler did. It uses 100 runqueues (for all 100 RT +priority levels, instead of 140 in the previous scheduler) and it needs no +expired array. + +Scheduling classes are implemented through the sched_class structure, which +contains hooks to functions that must be called whenever an interesting event +occurs. + +This is the (partial) list of the hooks: + + - enqueue_task(...) + + Called when a task enters a runnable state. + It puts the scheduling entity (task) into the red-black tree and + increments the nr_running variable. + + - dequeue_tree(...) + + When a task is no longer runnable, this function is called to keep the + corresponding scheduling entity out of the red-black tree. It decrements + the nr_running variable. + + - yield_task(...) + + This function is basically just a dequeue followed by an enqueue, unless the + compat_yield sysctl is turned on; in that case, it places the scheduling + entity at the right-most end of the red-black tree. + + - check_preempt_curr(...) + + This function checks if a task that entered the runnable state should + preempt the currently running task. + + - pick_next_task(...) + + This function chooses the most appropriate task eligible to run next. + + - set_curr_task(...) + + This function is called when a task changes its scheduling class or changes + its task group. + + - task_tick(...) + + This function is mostly called from time tick functions; it might lead to + process switch. This drives the running preemption. + + - task_new(...) + + The core scheduler gives the scheduling module an opportunity to manage new + task startup. The CFS scheduling module uses it for group scheduling, while + the scheduling module for a real-time task does not use it. + + + +7. GROUP SCHEDULER EXTENSIONS TO CFS + +Normally, the scheduler operates on individual tasks and strives to provide +fair CPU time to each task. Sometimes, it may be desirable to group tasks and +provide fair CPU time to each such task group. For example, it may be +desirable to first provide fair CPU time to each user on the system and then to +each task belonging to a user. + +CONFIG_CGROUP_SCHED strives to achieve exactly that. It lets tasks to be +grouped and divides CPU time fairly among such groups. + +CONFIG_RT_GROUP_SCHED permits to group real-time (i.e., SCHED_FIFO and +SCHED_RR) tasks. + +CONFIG_FAIR_GROUP_SCHED permits to group CFS (i.e., SCHED_NORMAL and +SCHED_BATCH) tasks. + + These options need CONFIG_CGROUPS to be defined, and let the administrator + create arbitrary groups of tasks, using the "cgroup" pseudo filesystem. See + Documentation/cgroups/cgroups.txt for more information about this filesystem. + +When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each +group created using the pseudo filesystem. See example steps below to create +task groups and modify their CPU share using the "cgroups" pseudo filesystem. + + # mkdir /dev/cpuctl + # mount -t cgroup -ocpu none /dev/cpuctl + # cd /dev/cpuctl + + # mkdir multimedia # create "multimedia" group of tasks + # mkdir browser # create "browser" group of tasks + + # #Configure the multimedia group to receive twice the CPU bandwidth + # #that of browser group + + # echo 2048 > multimedia/cpu.shares + # echo 1024 > browser/cpu.shares + + # firefox & # Launch firefox and move it to "browser" group + # echo <firefox_pid> > browser/tasks + + # #Launch gmplayer (or your favourite movie player) + # echo <movie_player_pid> > multimedia/tasks diff --git a/Documentation/scheduler/sched-domains.txt b/Documentation/scheduler/sched-domains.txt new file mode 100644 index 00000000..373ceacc --- /dev/null +++ b/Documentation/scheduler/sched-domains.txt @@ -0,0 +1,67 @@ +Each CPU has a "base" scheduling domain (struct sched_domain). These are +accessed via cpu_sched_domain(i) and this_sched_domain() macros. The domain +hierarchy is built from these base domains via the ->parent pointer. ->parent +MUST be NULL terminated, and domain structures should be per-CPU as they +are locklessly updated. + +Each scheduling domain spans a number of CPUs (stored in the ->span field). +A domain's span MUST be a superset of it child's span (this restriction could +be relaxed if the need arises), and a base domain for CPU i MUST span at least +i. The top domain for each CPU will generally span all CPUs in the system +although strictly it doesn't have to, but this could lead to a case where some +CPUs will never be given tasks to run unless the CPUs allowed mask is +explicitly set. A sched domain's span means "balance process load among these +CPUs". + +Each scheduling domain must have one or more CPU groups (struct sched_group) +which are organised as a circular one way linked list from the ->groups +pointer. The union of cpumasks of these groups MUST be the same as the +domain's span. The intersection of cpumasks from any two of these groups +MUST be the empty set. The group pointed to by the ->groups pointer MUST +contain the CPU to which the domain belongs. Groups may be shared among +CPUs as they contain read only data after they have been set up. + +Balancing within a sched domain occurs between groups. That is, each group +is treated as one entity. The load of a group is defined as the sum of the +load of each of its member CPUs, and only when the load of a group becomes +out of balance are tasks moved between groups. + +In kernel/sched.c, rebalance_tick is run periodically on each CPU. This +function takes its CPU's base sched domain and checks to see if has reached +its rebalance interval. If so, then it will run load_balance on that domain. +rebalance_tick then checks the parent sched_domain (if it exists), and the +parent of the parent and so forth. + +*** Implementing sched domains *** +The "base" domain will "span" the first level of the hierarchy. In the case +of SMT, you'll span all siblings of the physical CPU, with each group being +a single virtual CPU. + +In SMP, the parent of the base domain will span all physical CPUs in the +node. Each group being a single physical CPU. Then with NUMA, the parent +of the SMP domain will span the entire machine, with each group having the +cpumask of a node. Or, you could do multi-level NUMA or Opteron, for example, +might have just one domain covering its one NUMA level. + +The implementor should read comments in include/linux/sched.h: +struct sched_domain fields, SD_FLAG_*, SD_*_INIT to get an idea of +the specifics and what to tune. + +For SMT, the architecture must define CONFIG_SCHED_SMT and provide a +cpumask_t cpu_sibling_map[NR_CPUS], where cpu_sibling_map[i] is the mask of +all "i"'s siblings as well as "i" itself. + +Architectures may retain the regular override the default SD_*_INIT flags +while using the generic domain builder in kernel/sched.c if they wish to +retain the traditional SMT->SMP->NUMA topology (or some subset of that). This +can be done by #define'ing ARCH_HASH_SCHED_TUNE. + +Alternatively, the architecture may completely override the generic domain +builder by #define'ing ARCH_HASH_SCHED_DOMAIN, and exporting your +arch_init_sched_domains function. This function will attach domains to all +CPUs using cpu_attach_domain. + +The sched-domains debugging infrastructure can be enabled by enabling +CONFIG_SCHED_DEBUG. This enables an error checking parse of the sched domains +which should catch most possible errors (described above). It also prints out +the domain structure in a visual format. diff --git a/Documentation/scheduler/sched-nice-design.txt b/Documentation/scheduler/sched-nice-design.txt new file mode 100644 index 00000000..3ac1e46d --- /dev/null +++ b/Documentation/scheduler/sched-nice-design.txt @@ -0,0 +1,108 @@ +This document explains the thinking about the revamped and streamlined +nice-levels implementation in the new Linux scheduler. + +Nice levels were always pretty weak under Linux and people continuously +pestered us to make nice +19 tasks use up much less CPU time. + +Unfortunately that was not that easy to implement under the old +scheduler, (otherwise we'd have done it long ago) because nice level +support was historically coupled to timeslice length, and timeslice +units were driven by the HZ tick, so the smallest timeslice was 1/HZ. + +In the O(1) scheduler (in 2003) we changed negative nice levels to be +much stronger than they were before in 2.4 (and people were happy about +that change), and we also intentionally calibrated the linear timeslice +rule so that nice +19 level would be _exactly_ 1 jiffy. To better +understand it, the timeslice graph went like this (cheesy ASCII art +alert!): + + + A + \ | [timeslice length] + \ | + \ | + \ | + \ | + \|___100msecs + |^ . _ + | ^ . _ + | ^ . _ + -*----------------------------------*-----> [nice level] + -20 | +19 + | + | + +So that if someone wanted to really renice tasks, +19 would give a much +bigger hit than the normal linear rule would do. (The solution of +changing the ABI to extend priorities was discarded early on.) + +This approach worked to some degree for some time, but later on with +HZ=1000 it caused 1 jiffy to be 1 msec, which meant 0.1% CPU usage which +we felt to be a bit excessive. Excessive _not_ because it's too small of +a CPU utilization, but because it causes too frequent (once per +millisec) rescheduling. (and would thus trash the cache, etc. Remember, +this was long ago when hardware was weaker and caches were smaller, and +people were running number crunching apps at nice +19.) + +So for HZ=1000 we changed nice +19 to 5msecs, because that felt like the +right minimal granularity - and this translates to 5% CPU utilization. +But the fundamental HZ-sensitive property for nice+19 still remained, +and we never got a single complaint about nice +19 being too _weak_ in +terms of CPU utilization, we only got complaints about it (still) being +too _strong_ :-) + +To sum it up: we always wanted to make nice levels more consistent, but +within the constraints of HZ and jiffies and their nasty design level +coupling to timeslices and granularity it was not really viable. + +The second (less frequent but still periodically occurring) complaint +about Linux's nice level support was its assymetry around the origo +(which you can see demonstrated in the picture above), or more +accurately: the fact that nice level behavior depended on the _absolute_ +nice level as well, while the nice API itself is fundamentally +"relative": + + int nice(int inc); + + asmlinkage long sys_nice(int increment) + +(the first one is the glibc API, the second one is the syscall API.) +Note that the 'inc' is relative to the current nice level. Tools like +bash's "nice" command mirror this relative API. + +With the old scheduler, if you for example started a niced task with +1 +and another task with +2, the CPU split between the two tasks would +depend on the nice level of the parent shell - if it was at nice -10 the +CPU split was different than if it was at +5 or +10. + +A third complaint against Linux's nice level support was that negative +nice levels were not 'punchy enough', so lots of people had to resort to +run audio (and other multimedia) apps under RT priorities such as +SCHED_FIFO. But this caused other problems: SCHED_FIFO is not starvation +proof, and a buggy SCHED_FIFO app can also lock up the system for good. + +The new scheduler in v2.6.23 addresses all three types of complaints: + +To address the first complaint (of nice levels being not "punchy" +enough), the scheduler was decoupled from 'time slice' and HZ concepts +(and granularity was made a separate concept from nice levels) and thus +it was possible to implement better and more consistent nice +19 +support: with the new scheduler nice +19 tasks get a HZ-independent +1.5%, instead of the variable 3%-5%-9% range they got in the old +scheduler. + +To address the second complaint (of nice levels not being consistent), +the new scheduler makes nice(1) have the same CPU utilization effect on +tasks, regardless of their absolute nice levels. So on the new +scheduler, running a nice +10 and a nice 11 task has the same CPU +utilization "split" between them as running a nice -5 and a nice -4 +task. (one will get 55% of the CPU, the other 45%.) That is why nice +levels were changed to be "multiplicative" (or exponential) - that way +it does not matter which nice level you start out from, the 'relative +result' will always be the same. + +The third complaint (of negative nice levels not being "punchy" enough +and forcing audio apps to run under the more dangerous SCHED_FIFO +scheduling policy) is addressed by the new scheduler almost +automatically: stronger negative nice levels are an automatic +side-effect of the recalibrated dynamic range of nice levels. diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt new file mode 100644 index 00000000..605b0d40 --- /dev/null +++ b/Documentation/scheduler/sched-rt-group.txt @@ -0,0 +1,184 @@ + Real-Time group scheduling + -------------------------- + +CONTENTS +======== + +0. WARNING +1. Overview + 1.1 The problem + 1.2 The solution +2. The interface + 2.1 System-wide settings + 2.2 Default behaviour + 2.3 Basis for grouping tasks +3. Future plans + + +0. WARNING +========== + + Fiddling with these settings can result in an unstable system, the knobs are + root only and assumes root knows what he is doing. + +Most notable: + + * very small values in sched_rt_period_us can result in an unstable + system when the period is smaller than either the available hrtimer + resolution, or the time it takes to handle the budget refresh itself. + + * very small values in sched_rt_runtime_us can result in an unstable + system when the runtime is so small the system has difficulty making + forward progress (NOTE: the migration thread and kstopmachine both + are real-time processes). + +1. Overview +=========== + + +1.1 The problem +--------------- + +Realtime scheduling is all about determinism, a group has to be able to rely on +the amount of bandwidth (eg. CPU time) being constant. In order to schedule +multiple groups of realtime tasks, each group must be assigned a fixed portion +of the CPU time available. Without a minimum guarantee a realtime group can +obviously fall short. A fuzzy upper limit is of no use since it cannot be +relied upon. Which leaves us with just the single fixed portion. + +1.2 The solution +---------------- + +CPU time is divided by means of specifying how much time can be spent running +in a given period. We allocate this "run time" for each realtime group which +the other realtime groups will not be permitted to use. + +Any time not allocated to a realtime group will be used to run normal priority +tasks (SCHED_OTHER). Any allocated run time not used will also be picked up by +SCHED_OTHER. + +Let's consider an example: a frame fixed realtime renderer must deliver 25 +frames a second, which yields a period of 0.04s per frame. Now say it will also +have to play some music and respond to input, leaving it with around 80% CPU +time dedicated for the graphics. We can then give this group a run time of 0.8 +* 0.04s = 0.032s. + +This way the graphics group will have a 0.04s period with a 0.032s run time +limit. Now if the audio thread needs to refill the DMA buffer every 0.005s, but +needs only about 3% CPU time to do so, it can do with a 0.03 * 0.005s = +0.00015s. So this group can be scheduled with a period of 0.005s and a run time +of 0.00015s. + +The remaining CPU time will be used for user input and other tasks. Because +realtime tasks have explicitly allocated the CPU time they need to perform +their tasks, buffer underruns in the graphics or audio can be eliminated. + +NOTE: the above example is not fully implemented yet. We still +lack an EDF scheduler to make non-uniform periods usable. + + +2. The Interface +================ + + +2.1 System wide settings +------------------------ + +The system wide settings are configured under the /proc virtual file system: + +/proc/sys/kernel/sched_rt_period_us: + The scheduling period that is equivalent to 100% CPU bandwidth + +/proc/sys/kernel/sched_rt_runtime_us: + A global limit on how much time realtime scheduling may use. Even without + CONFIG_RT_GROUP_SCHED enabled, this will limit time reserved to realtime + processes. With CONFIG_RT_GROUP_SCHED it signifies the total bandwidth + available to all realtime groups. + + * Time is specified in us because the interface is s32. This gives an + operating range from 1us to about 35 minutes. + * sched_rt_period_us takes values from 1 to INT_MAX. + * sched_rt_runtime_us takes values from -1 to (INT_MAX - 1). + * A run time of -1 specifies runtime == period, ie. no limit. + + +2.2 Default behaviour +--------------------- + +The default values for sched_rt_period_us (1000000 or 1s) and +sched_rt_runtime_us (950000 or 0.95s). This gives 0.05s to be used by +SCHED_OTHER (non-RT tasks). These defaults were chosen so that a run-away +realtime tasks will not lock up the machine but leave a little time to recover +it. By setting runtime to -1 you'd get the old behaviour back. + +By default all bandwidth is assigned to the root group and new groups get the +period from /proc/sys/kernel/sched_rt_period_us and a run time of 0. If you +want to assign bandwidth to another group, reduce the root group's bandwidth +and assign some or all of the difference to another group. + +Realtime group scheduling means you have to assign a portion of total CPU +bandwidth to the group before it will accept realtime tasks. Therefore you will +not be able to run realtime tasks as any user other than root until you have +done that, even if the user has the rights to run processes with realtime +priority! + + +2.3 Basis for grouping tasks +---------------------------- + +Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real +CPU bandwidth to task groups. + +This uses the /cgroup virtual file system and +"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each +control group. + +For more information on working with control groups, you should read +Documentation/cgroups/cgroups.txt as well. + +Group settings are checked against the following limits in order to keep the +configuration schedulable: + + \Sum_{i} runtime_{i} / global_period <= global_runtime / global_period + +For now, this can be simplified to just the following (but see Future plans): + + \Sum_{i} runtime_{i} <= global_runtime + + +3. Future plans +=============== + +There is work in progress to make the scheduling period for each group +("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well. + +The constraint on the period is that a subgroup must have a smaller or +equal period to its parent. But realistically its not very useful _yet_ +as its prone to starvation without deadline scheduling. + +Consider two sibling groups A and B; both have 50% bandwidth, but A's +period is twice the length of B's. + +* group A: period=100000us, runtime=10000us + - this runs for 0.01s once every 0.1s + +* group B: period= 50000us, runtime=10000us + - this runs for 0.01s twice every 0.1s (or once every 0.05 sec). + +This means that currently a while (1) loop in A will run for the full period of +B and can starve B's tasks (assuming they are of lower priority) for a whole +period. + +The next project will be SCHED_EDF (Earliest Deadline First scheduling) to bring +full deadline scheduling to the linux kernel. Deadline scheduling the above +groups and treating end of the period as a deadline will ensure that they both +get their allocated time. + +Implementing SCHED_EDF might take a while to complete. Priority Inheritance is +the biggest challenge as the current linux PI infrastructure is geared towards +the limited static priority levels 0-99. With deadline scheduling you need to +do deadline inheritance (since priority is inversely proportional to the +deadline delta (deadline - now)). + +This means the whole PI machinery will have to be reworked - and that is one of +the most complex pieces of code we have. diff --git a/Documentation/scheduler/sched-stats.txt b/Documentation/scheduler/sched-stats.txt new file mode 100644 index 00000000..01e69404 --- /dev/null +++ b/Documentation/scheduler/sched-stats.txt @@ -0,0 +1,156 @@ +Version 14 of schedstats includes support for sched_domains, which hit the +mainline kernel in 2.6.20 although it is identical to the stats from version +12 which was in the kernel from 2.6.13-2.6.19 (version 13 never saw a kernel +release). Some counters make more sense to be per-runqueue; other to be +per-domain. Note that domains (and their associated information) will only +be pertinent and available on machines utilizing CONFIG_SMP. + +In version 14 of schedstat, there is at least one level of domain +statistics for each cpu listed, and there may well be more than one +domain. Domains have no particular names in this implementation, but +the highest numbered one typically arbitrates balancing across all the +cpus on the machine, while domain0 is the most tightly focused domain, +sometimes balancing only between pairs of cpus. At this time, there +are no architectures which need more than three domain levels. The first +field in the domain stats is a bit map indicating which cpus are affected +by that domain. + +These fields are counters, and only increment. Programs which make use +of these will need to start with a baseline observation and then calculate +the change in the counters at each subsequent observation. A perl script +which does this for many of the fields is available at + + http://eaglet.rain.com/rick/linux/schedstat/ + +Note that any such script will necessarily be version-specific, as the main +reason to change versions is changes in the output format. For those wishing +to write their own scripts, the fields are described here. + +CPU statistics +-------------- +cpu<N> 1 2 3 4 5 6 7 8 9 10 11 12 + +NOTE: In the sched_yield() statistics, the active queue is considered empty + if it has only one process in it, since obviously the process calling + sched_yield() is that process. + +First four fields are sched_yield() statistics: + 1) # of times both the active and the expired queue were empty + 2) # of times just the active queue was empty + 3) # of times just the expired queue was empty + 4) # of times sched_yield() was called + +Next three are schedule() statistics: + 5) # of times we switched to the expired queue and reused it + 6) # of times schedule() was called + 7) # of times schedule() left the processor idle + +Next two are try_to_wake_up() statistics: + 8) # of times try_to_wake_up() was called + 9) # of times try_to_wake_up() was called to wake up the local cpu + +Next three are statistics describing scheduling latency: + 10) sum of all time spent running by tasks on this processor (in jiffies) + 11) sum of all time spent waiting to run by tasks on this processor (in + jiffies) + 12) # of timeslices run on this cpu + + +Domain statistics +----------------- +One of these is produced per domain for each cpu described. (Note that if +CONFIG_SMP is not defined, *no* domains are utilized and these lines +will not appear in the output.) + +domain<N> <cpumask> 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 + +The first field is a bit mask indicating what cpus this domain operates over. + +The next 24 are a variety of load_balance() statistics in grouped into types +of idleness (idle, busy, and newly idle): + + 1) # of times in this domain load_balance() was called when the + cpu was idle + 2) # of times in this domain load_balance() checked but found + the load did not require balancing when the cpu was idle + 3) # of times in this domain load_balance() tried to move one or + more tasks and failed, when the cpu was idle + 4) sum of imbalances discovered (if any) with each call to + load_balance() in this domain when the cpu was idle + 5) # of times in this domain pull_task() was called when the cpu + was idle + 6) # of times in this domain pull_task() was called even though + the target task was cache-hot when idle + 7) # of times in this domain load_balance() was called but did + not find a busier queue while the cpu was idle + 8) # of times in this domain a busier queue was found while the + cpu was idle but no busier group was found + + 9) # of times in this domain load_balance() was called when the + cpu was busy + 10) # of times in this domain load_balance() checked but found the + load did not require balancing when busy + 11) # of times in this domain load_balance() tried to move one or + more tasks and failed, when the cpu was busy + 12) sum of imbalances discovered (if any) with each call to + load_balance() in this domain when the cpu was busy + 13) # of times in this domain pull_task() was called when busy + 14) # of times in this domain pull_task() was called even though the + target task was cache-hot when busy + 15) # of times in this domain load_balance() was called but did not + find a busier queue while the cpu was busy + 16) # of times in this domain a busier queue was found while the cpu + was busy but no busier group was found + + 17) # of times in this domain load_balance() was called when the + cpu was just becoming idle + 18) # of times in this domain load_balance() checked but found the + load did not require balancing when the cpu was just becoming idle + 19) # of times in this domain load_balance() tried to move one or more + tasks and failed, when the cpu was just becoming idle + 20) sum of imbalances discovered (if any) with each call to + load_balance() in this domain when the cpu was just becoming idle + 21) # of times in this domain pull_task() was called when newly idle + 22) # of times in this domain pull_task() was called even though the + target task was cache-hot when just becoming idle + 23) # of times in this domain load_balance() was called but did not + find a busier queue while the cpu was just becoming idle + 24) # of times in this domain a busier queue was found while the cpu + was just becoming idle but no busier group was found + + Next three are active_load_balance() statistics: + 25) # of times active_load_balance() was called + 26) # of times active_load_balance() tried to move a task and failed + 27) # of times active_load_balance() successfully moved a task + + Next three are sched_balance_exec() statistics: + 28) sbe_cnt is not used + 29) sbe_balanced is not used + 30) sbe_pushed is not used + + Next three are sched_balance_fork() statistics: + 31) sbf_cnt is not used + 32) sbf_balanced is not used + 33) sbf_pushed is not used + + Next three are try_to_wake_up() statistics: + 34) # of times in this domain try_to_wake_up() awoke a task that + last ran on a different cpu in this domain + 35) # of times in this domain try_to_wake_up() moved a task to the + waking cpu because it was cache-cold on its own cpu anyway + 36) # of times in this domain try_to_wake_up() started passive balancing + +/proc/<pid>/schedstat +---------------- +schedstats also adds a new /proc/<pid>/schedstat file to include some of +the same information on a per-process level. There are three fields in +this file correlating for that process to: + 1) time spent on the cpu + 2) time spent waiting on a runqueue + 3) # of timeslices run on this cpu + +A program could be easily written to make use of these extra fields to +report on how well a particular process or set of processes is faring +under the scheduler's policies. A simple version of such a program is +available at + http://eaglet.rain.com/rick/linux/schedstat/v12/latency.c |