diff options
Diffstat (limited to 'xorg-cf-files/sequent.cf')
| -rw-r--r-- | xorg-cf-files/sequent.cf | 444 |
1 files changed, 0 insertions, 444 deletions
diff --git a/xorg-cf-files/sequent.cf b/xorg-cf-files/sequent.cf deleted file mode 100644 index 99ba9b4..0000000 --- a/xorg-cf-files/sequent.cf +++ /dev/null @@ -1,444 +0,0 @@ -XCOMM platform: $XConsortium: sequent.cf$ - -/* - * SET VERSION NUMBERS BEFORE MAKING MAKEFILES; also, you'll need to install - * util/scripts/bsdinstall.sh before doing a "make install" - */ - -/* - * Version numbers are set one of two ways: - * - * If the target version is different than the machine you are building on, - * set the target versions using the environmental variable IMAKEINCLUDES. - * Example: IMAKEINCLUDES="-I. -DOSMajorVersion=4 -DOSMinorVersion=4" - * This is usually only done at Sequent when building a product using - * cross compiling tools and target headers and libraries. - * - * Otherwise, the imake will use uname(2) to calculate the default to be - * the same as the machine you are building on. The X11R6 imake will set - * DefaultOS*Version macros to be these default values. - * Those default values will be used in the assignments below. - * This is the recommended method to be used by customers. - */ - - /* defaults from imake via uname(2) */ -#ifndef OSName -#define OSName DefaultOSName -#endif -#ifndef OSMajorVersion -#define OSMajorVersion DefaultOSMajorVersion -#endif -#ifndef OSMinorVersion -#define OSMinorVersion DefaultOSMinorVersion -#endif -#ifndef OSTeenyVersion -#define OSTeenyVersion DefaultOSTeenyVersion -#endif -XCOMM operating system: OSName V/**/OSMajorVersion./**/OSMinorVersion./**/OSTeenyVersion - -/* - * Sequent Dynix/PTX 4.x.x (SVR4) and later operating systems. - * - * Sequent Dynix/PTX 4.2.3 and later operating systems are supported with - * the X11R6 sequent.cf and other X11R6 configuration files. - * Specifically 4.4.2 and later have been tested. - * - * Attempting to use these X11R6 configuration files and X11R6 source files - * with early versions of Dynix/PTX 4.x.x may work, however that will not be - * tested or supported at Sequent. - * Sequent Dynix/PTX 2.1.x has been retired so support for it and earlier - * releases has been removed. - */ - -#if OSMajorVersion >= 4 - -#define SystemV4 YES -#define SequentVersionDefines -DSVR4 -#define ExtraLibraries -#define ForceNormalLib YES -#define HasRequiredLibs YES -#define NeedBerklib NO /* gettimeofday in libc */ - -#define XmExtraLibraries /* for ABI-compliance do not use -lgen here */ -#define MotifDefines -DXM_STRINGS_1_2_2_STATE /* code review */ - -/* initial port does not use multiple socket libs, default libsocket.so.1.1 */ -#define HasMultipleSockets NO /* obsolete */ /* only libsocket.so.1.1 */ - -#endif /* OSMajorVersion >= 4 */ - -/* - * Below this line are generic defines that apply to all Sequent systems. - * However they are currently tested with only OSMajorVersion >= 4 - */ - -/* - * The following cpp macro defines are order independent, - * since the right-hand-side is constant. - * Therefore these are simply listed in alphabetical order. - * Macros defined later may use these definitions. - */ - -/* - * Threads.tmpl cpp macros. - * Sequent overrides the Threads.tmpl defaults with the values below. - * Sequent has native threads for ptx 4.5.0 and higher. - */ - -#if ( OSMajorVersion >= 5 || (OSMajorVersion == 4 && OSMinorVersion >= 5) ) - -#define HasPosixThreads YES -#define HasThreadSafeAPI YES -#define ThreadedX YES -#define ThreadsLibraries /**/ -#define ThreadsCplusplusLibraries /**/ -#define ThreadPreStdAPIDefines /**/ -#define ThreadsCompileFlags -Kthread -#define ThreadsCplusplusCompileFlags -Kthread -#define SharedThreadReqs /**/ - -/* - * THREADS macro and environment variable used with Sequent commands only. - * We use THREADS rather than the generic X11 THREADS_CFLAGS because we - * want to ensure that the macro is defined for all compiles and not just - * those Makefiles built from a Imakefile that includes Threads.tmpl. - * - * Sequent compiler option -Kthread will also define -D_SEQUENT_THREADS. - * Currently using -Kthread is the recommended interface to this define. - * Currently there are no extra includes files using -D_SEQUENT_THREADS. - * Currently no reason for makedepend or cpp to use -D_SEQUENT_THREADS. - * If needed in the future, we would add to ProjectThreadsDefines - * - * #define ProjectThreadsDefines -DXTHREADS -D_SEQUENT_THREADS - */ - - THREADS = -Kthread - -#endif /* ptx 4.5.0 or greater has threads */ - -/* - * Imake.tmpl cpp macros. - * Sequent overrides the Imake.tmpl defaults with the values below. - */ - -#define BuildLibPathVar LD_LIBRARY_PATH -#define DefaultCCOptions -Xa -#define ExpandManNames YES -#define ExtraFilesToClean *.z -#define HasNdbm YES -#define HasShadowPasswd YES -#define HasSockets YES /* default */ -#define HasVarDirectory NO -#ifdef UseInstalled -#define InstallCmd $(BINDIR)/ptxinst -t "$(TOOLS)" -#else -#define InstallCmd $(SHELL) $(SCRIPTSRC)/ptxinst.sh -#endif /* UseInstalled */ -#define InstPgmFlags -s -m 0555 -o bin -g bin -#define InstBinFlags -s -m 0555 -o bin -g bin -#define InstLibFlags -m 0444 -o bin -g bin -#define InstShLibFlags -m 0555 -o bin -g bin -#define Malloc0ReturnsNull YES -#define ManSuffix 1 /* use just one tab or cpp will die */ -#define LibManSuffix 3x /* use just one tab or cpp will die */ -#define LibmanDir $(MANSOURCEPATH)3 -#define MiscManSuffix 5x /* use just one tab or cpp will die */ -#define MiscManDir $(MANSOURCEPATH)5 -#define MkdirHierCmd mkdir -p -#define NeedConstPrototypes YES -#define NeedFunctionPrototypes YES -#define NeedNestedPrototypes YES -#define NeedVarargsPrototypes YES -#define StripInstalledPrograms YES -#define SystemManDirectory /usr/catman -#define TermcapLibrary -lcurses /* code review for SVR4 ? */ -#define TerminfoDir /usr/lib/terminfo /* Sequent addition */ -#define ToolkitStringsABIOptions -intelabi - - -/* - * X11.tmpl cpp macros. - * Sequent overrides the X11.tmpl defaults with the values below. - */ - -#define BuildDps YES -#define BuildServer YES -#define BuildXF86DGA NO /* DGA has no meaning on Sequent HW */ -#define BuildXF86MiscExt NO /* turn off the server portion */ -#define BuildXF86VidModeExt NO /* turn off the server portion */ -#define BuildXInputExt YES -#define BuildXKBuilib YES /* override NO set in xorg.cf */ -#define ConnectionFlags -DTCPCONN -#define DefaultSystemPath /bin:/etc:/usr/bin:$(BINDIR) -#define DefaultUserPath :/bin:/usr/bin:$(BINDIR) -#define HasPlugin YES -#define HasXServer NO -#define InstallFSConfig YES /* safe since we install to DESTDIR */ -#define InstallXdmConfig YES /* safe since we install to DESTDIR */ -#define MotifBC NO /* default, code review from X11R5 */ -#define XdmServersType fs /* One tab here. Needed if BuildServer YES */ -#define XtMalloc0ReturnsNullDefines Malloc0ReturnsNullDefines -DXTMALLOC_BC -#define XprtServer YES -#define XVirtualFramebufferServer YES -#define XF86SVGAServer NO /* Don't build the XFree86 servers */ -#define XF86S3Server NO -#define XF86S3VServer NO -#define XF86I8514Server NO -#define XF86Mach8Server NO -#define XF86Mach32Server NO -#define XF86Mach64Server NO -#define XF86P9000Server NO -#define XF86AGXServer NO -#define XF86I128Server NO -#define XF86GLINTServer NO -#define XF86REALimageServer NO - -/* - * Motif.tmpl cpp macros. - * Sequent overrides the Motif.tmpl default with the values below. - */ - -#define GencatCmd /usr/lbin/gencat - -/* Port Sequent macro DontBuildMotifConfig to Motif 2.1 */ -/* - * #ifndef MetroLink - * #define DontBuildMotifConfig - * #endif - */ - -/* - * Sequent added cpp macros. - * - * The following cpp macro defines have been introduced by Sequent. - * They will be referenced in Sequent patches sent to TOG. - * They may be moved above if accepted by TOG or X.org. - */ - -#define AdminBaseDir /usr/admin.ptx/etc/base.dir -#define MessageCatDir /usr/lib/message/C -#define NeedXinputAlias YES -#define UseHidesymsLists YES -#define XlbiffMailPath /usr/mail/%s /* used by contrib xlbiff */ - -/* - * Imake.tmpl, X11.tmpl, or other order dependent cpp defines. - * - * The following cpp macro defines are order dependent. - * They depend on previously defined cpp macros. - * Do not change the order. - */ -#define SharedLibraryCCOptions DefaultCCOptions -#define StandardDefines SequentVersionDefines -DOSMAJORVERSION=OSMajorVersion -DOSMINORVERSION=OSMinorVersion -DANSICPP -DDYNIX_C2 -DMetroLink -#define StandardCppDefines StandardDefines -D_SOCKET_VERSION=11 -DUnixCpp - -#ifdef ProjectRoot -#define ManDirectoryRoot ProjectRoot/**//catman -#else -#define ManDirectoryRoot SystemManDirectory -#endif -#define XmanSearchPath ManDirectoryRoot /* for X11R5 xman */ - -/* - * Sequent configuration environment specific to building X11 and Motif. - * This environment is only available when UseInstalled is not defined. - * Therefore this environment is not used by customers using xmkmf. - */ - -#ifndef UseInstalled - -/* Product builds using local X11 and Motif trees */ - -/* - * Provide libraries needed by nonX programs in the X11 build tree. - * These are not standard so the customer will be forced to add them to their - * Imakefile SYS_LIBRARIES if needed. An ABI program may not want or need them, - * so we do not include them in the ExtraLibraries provided to customers - * when UseInstalled is defined. We add them here as a convenience when - * building the entire X11 tree (at Sequent or the contractor). - */ -#undef ExtraLibraries -#define ExtraLibraries -lsocket -lnsl - -/* - * Sequent builds X11 and Motif in the same tree. - * The Motif project files include the X11 project files. - * - * Later we may use the Local project files similer the the lynx.cf - * - * #define LocalTmplFile <Motif.tmpl> - * #define LocalRulesFile <Motif.rules> - */ - -/* Try the Metro Link method. */ - -#ifndef MetroLink -#undef ProjectTmplFile -#define ProjectTmplFile <Motif.tmpl> -#undef ProjectRulesFile -#define ProjectRulesFile <Motif.rules> -#endif - -/* - * Later change to Metro Link directory layout, - * or allow $(TOP)/../motif21 - */ - -/* Try the Metro Link method. */ - -#ifndef MetroLink -#define MTop $(TOP)/motif21 -#endif - -/* - * Set the Program macros to be correct for the target machine. - * This will avoid using any crosstools as hardwired strings - * built into binaries that will run on the target machine. - * - * These macro names need to be ported from X11R5 to X11R6. - */ -#define ArProgramBase ar -#define CppProgram /lib/cpp -#define CcProgram cc -#define RanlibProgram ranlib - -/* - * Build all the X11 debug libaries *_d.a for use by Sequent Service - */ - -/* - * Set DebugLibDefault YES for Sequent to build all debug libs. - * If we move this to generic code to *.tmpl files, - * use the default code below that sets the default NO - */ - -#define DebugLibDefault NO - -#ifndef DebugLibDefault -#define DebugLibDefault NO -#endif - -#define DebugLibX11 DebugLibDefault /* debugged X library */ -#define DebugLibXext DebugLibDefault /* debugged Xext library */ -#define DebugLibXau DebugLibDefault /* debugged auth library */ -#define DebugLibXdmcp DebugLibDefault /* debugged XDMCP library */ -#define DebugLibXmu DebugLibDefault /* debugged Xmu library */ -#define DebugLibXp DebugLibDefault /* debugged Xp library */ -#define DebugLibXt DebugLibDefault /* debugged toolkit library */ -#define DebugLibXa DebugLibDefault /* debugged audio library */ -#define DebugLibXaw DebugLibDefault /* debugged widget library */ -#define DebugLibXi DebugLibDefault /* debugged Xi library */ -#define DebugLibXtst DebugLibDefault /* debugged Xtst library */ -#define DebugLibICE DebugLibDefault /* debugged ICE library */ -#define DebugLibSM DebugLibDefault /* debugged SM library */ -#define DebugLibXkey DebugLibDefault /* debugged Xkey library */ -#define DebugLibFS DebugLibDefault /* debugged FS library */ - -/* - * Build all the Motif debug libaries *_d.a for use by Service - */ -#define DebugLibXm DebugLibDefault -#define DebugLibMrm DebugLibDefault -#define DebugLibUil DebugLibDefault - -/* - * Build all the Adobe DPS debug libaries *_d.a for use by Service - */ -#define DebugLibDps DebugLibDefault - -#endif /* ! UseInstalled */ - -/* - * Sequent general make macros. - * X11R6.5 should migrate these to Imake.tmpl. - */ - -XCOMM Sequent general make macros. - -#ifndef PackCmd -#define PackCmd pack -#endif - PACK = PackCmd - -/* - * Sequent unique make macros. These will always be unique to Sequent. - * We introduce them here in sequent.cf since cpp macros are set in sequent.cf. - * We may later move them to sequentLib.tmpl. - */ - -XCOMM Sequent unique make macros. - - ADMINBASEDIR = AdminBaseDir - MESSAGECATDIR = MessageCatDir - -/* - * DPS default values (unique to sequent) - */ -#ifndef PswrapCmd -#define PswrapCmd pswrap -#endif - -#ifdef UseHidesymsLists - -#ifndef HidesymsCmd -#define HidesymsCmd /usr/lib/hidesyms/hidesyms -#endif -#ifndef HsAcppCmd -#define HsAcppCmd /lib/acpp -#endif -/* - * When building in the X11 tree. - * For shared libs, hidesyms executes in a subdir. - * For unshared libs, hidesyms executes in a subsubdir. - * Therefore we add both of these to the acpp path: - * ../../$(BUILDINCROOT)/lib/hidesyms:../$(BUILDINCROOT)/lib/hidesyms - */ -#ifndef HsAcppLocalPath -# define HsAcppLocalPath ../../$(BUILDINCROOT)/lib/hidesyms:../$(BUILDINCROOT)/lib/hidesyms -#endif -#ifndef HsAcppSystemPath -# define HsAcppSystemPath /usr/lib/hidesyms -#endif -#ifndef HsAcppPath -# ifdef UseInstalled -# define HsAcppPath HsAcppSystemPath -# else -# define HsAcppPath HsAcppLocalPath:HsAcppSystemPath -# endif /* UseInstalled */ -#endif -/* - * note: -DABI_SHARED_OBJECT requires a temporary fix added to - * Xt/Error.c to provide missing _abi_* routines not in libc.so.1. - * When the base adds those missing _abi_* to libc.so.1, - * then the code in Xt/Error.c can be removed and the corresponding - * symbols added to Xt/libXt.hs can be removed. - */ -#ifndef HsAcppDefines -#define HsAcppDefines -DABI_SHARED_OBJECT -D_SOCKET_VERSION=11 $(THREADS_DEFINES) -#endif - -/* - * For shared libs, hidesyms executes in a subdir, - * therefore we add a -L../$(BUILDLIBDIR) - */ -#ifndef LdPreLib -#ifndef UseInstalled -#define LdPreLib -L$(BUILDLIBDIR) -L../$(BUILDLIBDIR) -#endif -#endif - -XCOMM HIDESYMS is for filtering system library symbols. - - HIDESYMS = HidesymsCmd - HSACPPPATH = HsAcppPath - HSACPPCMD = HsAcppCmd - HSACPPDEFINES = HsAcppDefines - HSACPP = $(HSACPPCMD) -Y $(HSACPPPATH) $(HSACPPDEFINES) - HSCMD = $(HIDESYMS) -z -p "$(HSACPP)" - -#endif /* UseHidesymsLists */ - -#if OSMajorVersion >= 4 -#include <xorg.cf> -#include <sequentLib.rules> /* include after macros, before Motif.rules */ -#endif /* OSMajorVersion >= 4 */ |