diff options
Diffstat (limited to 'xsetmode/missing')
| -rwxr-xr-x | xsetmode/missing | 142 |
1 files changed, 59 insertions, 83 deletions
diff --git a/xsetmode/missing b/xsetmode/missing index 894e786..fc54c64 100755 --- a/xsetmode/missing +++ b/xsetmode/missing @@ -1,10 +1,6 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. - -scriptversion=2005-06-08.21 - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc. # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify @@ -19,8 +15,8 @@ scriptversion=2005-06-08.21 # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -42,24 +38,18 @@ else configure_ac=configure.in fi -msg="missing on your system" - case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in -h|--h|--he|--hel|--help) echo "\ @@ -84,15 +74,11 @@ Supported PROGRAM values: lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] - -Send bug reports to <bug-automake@gnu.org>." - exit $? + yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? + echo "missing 0.4 - GNU automake" ;; -*) @@ -101,44 +87,14 @@ Send bug reports to <bug-automake@gnu.org>." exit 1 ;; -esac - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). -case "$1" in - lex|yacc) - # Not GNU programs, they don't have --version. - ;; - - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) + aclocal*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 fi - ;; -esac -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case "$1" in - aclocal*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if +WARNING: \`$1' is missing on your system. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." @@ -146,8 +102,13 @@ WARNING: \`$1' is $msg. You should only need it if ;; autoconf) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if +WARNING: \`$1' is missing on your system. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." @@ -155,8 +116,13 @@ WARNING: \`$1' is $msg. You should only need it if ;; autoheader) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if +WARNING: \`$1' is missing on your system. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." @@ -174,8 +140,13 @@ WARNING: \`$1' is $msg. You should only need it if ;; automake*) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if +WARNING: \`$1' is missing on your system. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." @@ -185,9 +156,14 @@ WARNING: \`$1' is $msg. You should only need it if ;; autom4te) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the +WARNING: \`$1' is needed, and you do not seem to have it handy on your + system. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." @@ -209,7 +185,7 @@ WARNING: \`$1' is needed, but is $msg. bison|yacc) echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if +WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." @@ -239,7 +215,7 @@ WARNING: \`$1' $msg. You should only need it if lex|flex) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if +WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." @@ -261,8 +237,13 @@ WARNING: \`$1' is $msg. You should only need it if ;; help2man) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if +WARNING: \`$1' is missing on your system. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." @@ -281,30 +262,32 @@ WARNING: \`$1' is $msg. You should only need it if ;; makeinfo) + if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then + # We have makeinfo, but it failed. + exit 1 + fi + echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if +WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 touch $file ;; tar) shift + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error @@ -340,8 +323,8 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments. *) echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the +WARNING: \`$1' is needed, and you do not seem to have it handy on your + system. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case @@ -351,10 +334,3 @@ WARNING: \`$1' is needed, and is $msg. esac exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: |