Init basic-interrupted branch

10: Debug the app to be launched without failure
11: Change names of some variables
12/13: Create resource_infrared_motion_interrupted_data
14: Change how the interrupted_data is freed
15: Change the logic for interrupted_cb

Change-Id: I2c97a4469f55458cdeab234670e993690e2622ce

10 files changed, 251 insertions, 2834 deletions

diff --git a/.project b/.project
index dd48221..12ef4f0 100644
--- a/.project
+++ b/.project
@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <projectDescription>
-	<name>smart-light-basic</name>
+	<name>smart-light-basic-interrupt</name>
 	<comment></comment>
 	<projects>
 	</projects>
diff --git a/inc/resource/resource_infrared_motion.h b/inc/resource/resource_infrared_motion.h
new file mode 100755
index 0000000..993a973
--- /dev/null
+++ b/inc/resource/resource_infrared_motion.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __RESOURCE_INFRARED_MOTION_H__
+#define __RESOURCE_INFRARED_MOTION_H__
+
+typedef enum {
+	PERIPHERAL_HANDLE_ERROR_NONE = 0,                /**< Successful */
+	PERIPHERAL_HANDLE_ERROR_NOT_OPEN,
+	PERIPHERAL_HANDLE_ERROR_INVALID_PIN
+} peripheral_handle_error_e;
+
+typedef void (*resource_infrared_motion_interrupted_cb) (uint32_t motion_value, void *user_data);
+
+typedef struct resource_infrared_motion_interrupted_data_s {
+	resource_infrared_motion_interrupted_cb interrupted_cb;
+	void *interrupted_cb_user_data;
+	uint32_t motion_value;
+	int is_called_first_time;
+} resource_infrared_motion_interrupted_data;
+
+/**
+ * @brief Reads value of gpio connected infrared motion sensor (HC-SR501)
+ * @param[in] pin_num The gpio pin number for the infrared motion sensor
+ * @param[out] out_value The value of the gpio (zero or non-zero)
+ * @return 0 on success, otherwise a negative error value
+ * @see If the gpio pin is not open, create gpio handle before reading the value
+ */
+extern int resource_read_infrared_motion(int pin_num, uint32_t *out_value);
+
+/**
+ * @brief Releases the gpio handle
+ */
+extern void resource_close_infrared_motion(void);
+
+/**
+ * @brief Sets an interrupted callback to be invoked when interrupt is triggered on motion sensor
+ * @param[in] pin_num The gpio pin number for the infrared motion sensor
+ * @param[in] interrupted_cb interrupted user callback to be invoked
+ * @return 0 on success, otherwise a negative error value
+ * @see If the gpio pin is not open, create gpio handle before reading the value
+ */
+extern int resource_set_interrupted_cb_infrared_motion(int pin_num, resource_infrared_motion_interrupted_cb interrupted_cb, void *user_data);
+
+/**
+ * @brief Unsets the interrupted callback for motion sensor
+ * @param[in] pin_num The gpio pin number for the infrared motion sensor
+ */
+extern int resource_unset_interrupted_cb_infrared_motion(int pin_num);
+
+#endif /* __RESOURCE_INFRARED_MOTION_H__ */
diff --git a/inc/resource/resource_infrared_motion_sensor.h b/inc/resource/resource_infrared_motion_sensor.h
deleted file mode 100755
index 49062e6..0000000
--- a/inc/resource/resource_infrared_motion_sensor.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (c) 2018 Samsung Electronics Co., Ltd.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __POSITION_FINDER_RESOURCE_INFRARED_MOTION_SENSOR_H__
-#define __POSITION_FINDER_RESOURCE_INFRARED_MOTION_SENSOR_H__
-
-/**
- * @brief Reads value of gpio connected infrared motion sensor (HC-SR501)
- * @param[in] pin_num The gpio pin number for the infrared motion sensor
- * @param[out] out_value The value of the gpio (zero or non-zero)
- * @return 0 on success, otherwise a negative error value
- * @see If the gpio pin is not open, create gpio handle before reading the value
- */
-extern int resource_read_infrared_motion_sensor(int pin_num, uint32_t *out_value);
-
-/**
- * @brief Releases the gpio handle
- */
-extern void resource_close_infrared_motion_sensor(void);
-
-#endif /* __POSITION_FINDER_RESOURCE_INFRARED_MOTION_SENSOR_H__ */
diff --git a/inc/resource/resource_led.h b/inc/resource/resource_led.h
index 1a81a18..4adf22f 100755
--- a/inc/resource/resource_led.h
+++ b/inc/resource/resource_led.h
@@ -14,8 +14,8 @@
  * limitations under the License.
  */
 
-#ifndef __POSITION_FINDER_RESOURCE_LED_H__
-#define __POSITION_FINDER_RESOURCE_LED_H__
+#ifndef __RESOURCE_LED_H__
+#define __RESOURCE_LED_H__
 
 /**
  * @brief Writes value of gpio connected led light
@@ -31,4 +31,4 @@ extern int resource_write_led(int pin_num, int write_value);
  */
 extern void resource_close_led(void);
 
-#endif /* __POSITION_FINDER_RESOURCE_LED_H__ */
+#endif /* __RESOURCE_LED_H__ */
diff --git a/inc/smartthings.h b/inc/smartthings.h
deleted file mode 100644
index 7206479..0000000
--- a/inc/smartthings.h
+++ /dev/null
@@ -1,1656 +0,0 @@
-/*****************************************************************
- *
- * Copyright (c) 2018 Samsung Electronics Co., Ltd. All Rights Reserved
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************/
-
-
-#ifndef __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_H__
-#define __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_H__
-
-#include <stdlib.h>
-#include <stdbool.h>
-#include <tizen.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @addtogroup CAPI_SMARTTHINGS_THING_MASTER_MODULE
- * @{
- */
-
-/**
- * @brief Definition for the max length of SSID for access point.
- * @since_ses 1
- */
-#define SMARTTHINGS_SSID_LEN_MAX 32
-
-/**
- * @brief Definition for the max length of cloud information.
- * @since_ses 1
- */
-#define SMARTTHINGS_CLOUD_INFO_LEN_MAX 128
-
-/**
- * @brief Enumeration for the SmartThings error.
- * @since_ses 1
- */
-typedef enum {
-	SMARTTHINGS_ERROR_NONE = TIZEN_ERROR_NONE,                                /**< Successful */
-	SMARTTHINGS_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER,      /**< Invalid parameter */
-	SMARTTHINGS_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY,              /**< Out of memory */
-	SMARTTHINGS_ERROR_PERMISSION_DENIED = TIZEN_ERROR_PERMISSION_DENIED,      /**< Permission denied */
-	SMARTTHINGS_ERROR_NO_DATA = TIZEN_ERROR_NO_DATA,                          /**< No data */
-	SMARTTHINGS_ERROR_NOT_SUPPORTED = TIZEN_ERROR_NOT_SUPPORTED,              /**< Not supported */
-	SMARTTHINGS_ERROR_OPERATION_FAILED = TIZEN_ERROR_UNKNOWN - 1,             /**< Operation failed */
-	SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE = TIZEN_ERROR_UNKNOWN -2            /**< Service unavailable */
-} smartthings_error_e;
-
-/**
- * @brief Enumeration for SmartThings status.
- * @since_ses 1
- */
-typedef enum {
-	SMARTTHINGS_STATUS_NOT_READY = -1,                   /**< Service agent is not ready */
-	SMARTTHINGS_STATUS_INIT = 0,                         /**< Initial state of SmartThings Thing */
-	SMARTTHINGS_STATUS_ES_STARTED,                       /**< Easy-setup is started */
-	SMARTTHINGS_STATUS_ES_DONE,                          /**< Easy-setup is done */
-	SMARTTHINGS_STATUS_ES_FAILED_ON_OWNERSHIP_TRANSFER,  /**< Easy-setup failed due to Ownership-Transfer failure */
-	SMARTTHINGS_STATUS_CONNECTING_TO_AP,                 /**< Connecting to target Wi-Fi access point */
-	SMARTTHINGS_STATUS_CONNECTED_TO_AP,                  /**< Connected to target Wi-Fi access point */
-	SMARTTHINGS_STATUS_CONNECTING_TO_AP_FAILED,          /**< Failed to connect to target Wi-Fi access point */
-	SMARTTHINGS_STATUS_REGISTERING_TO_CLOUD,             /**< Trying to sign up, sign in and publish resources to cloud */
-	SMARTTHINGS_STATUS_REGISTERED_TO_CLOUD,              /**< Publish resources to cloud is complete. Now the thing is ready to be controlled via cloud */
-	SMARTTHINGS_STATUS_REGISTERING_FAILED_ON_SIGN_IN,    /**< Failed to sign in to cloud */
-	SMARTTHINGS_STATUS_REGISTERING_FAILED_ON_PUB_RES     /**< Failed to publish resources to cloud */
-} smartthings_status_e;
-
-/**
- * @brief Enumeration for RPC connection status.
- * @since_ses 1
- */
-typedef enum {
-	SMARTTHINGS_CONNECTION_STATUS_CONNECTED = 0,            /**< Connection is connected */
-	SMARTTHINGS_CONNECTION_STATUS_DISCONNECTED,             /**< Connection is disconnected */
-	SMARTTHINGS_CONNECTION_STATUS_REJECTED,                 /**< Connection is rejected */
-} smartthings_connection_status_e;
-
-/**
- * @brief The Wi-Fi mode.
- * @since_ses 1
- */
-typedef enum {
-	SMARTTHINGS_WIFI_MODE_11A = (1 << 0),   /**< Wi-Fi 11A */
-	SMARTTHINGS_WIFI_MODE_11B = (1 << 1),   /**< Wi-Fi 11B */
-	SMARTTHINGS_WIFI_MODE_11G = (1 << 2),   /**< Wi-Fi 11G */
-	SMARTTHINGS_WIFI_MODE_11N = (1 << 3),   /**< Wi-Fi 11N */
-	SMARTTHINGS_WIFI_MODE_11AC = (1 << 4)   /**< Wi-Fi 11AC */
-} smartthings_wifi_mode_e;
-
-/**
- * @brief The Wi-Fi frequency band.
- * @since_ses 1
- */
-typedef enum {
-	SMARTTHINGS_WIFI_FREQ_24G = (1 << 0),       /**< Wi-Fi 2.4GHz */
-	SMARTTHINGS_WIFI_FREQ_5G = (1 << 1),        /**< Wi-Fi 5GHz */
-} smartthings_wifi_freq_e;
-
-/**
- * @brief The Wi-Fi authentication type of access point.
- * @since_ses 1
- */
-typedef enum {
-	SMARTTHINGS_WIFI_AUTHTYPE_NONE = 0, /**< No authentication */
-	SMARTTHINGS_WIFI_AUTHTYPE_WEP,      /**< WEP */
-	SMARTTHINGS_WIFI_AUTHTYPE_WPA_PSK,  /**< WPA-PSK */
-	SMARTTHINGS_WIFI_AUTHTYPE_WPA2_PSK  /**< WPA2-PSK */
-} smartthings_wifi_authtype_e;
-
-/**
- * @brief The Wi-Fi encryption type of access point.
- * @since_ses 1
- */
-typedef enum {
-	SMARTTHINGS_WIFI_ENCTYPE_NONE = 0,      /**< No encryption */
-	SMARTTHINGS_WIFI_ENCTYPE_WEP_64,        /**< WEP 64 */
-	SMARTTHINGS_WIFI_ENCTYPE_WEP_128,       /**< WEP 128 */
-	SMARTTHINGS_WIFI_ENCTYPE_TKIP,          /**< TKIP */
-	SMARTTHINGS_WIFI_ENCTYPE_AES,           /**< AES */
-	SMARTTHINGS_WIFI_ENCTYPE_TKIP_AES       /**< TKIP/AES */
-} smartthings_wifi_enctype_e;
-
-/**
- * @brief The SmartThings handle.
- * @since_ses 1
- */
-typedef struct smartthings_s *smartthings_h;
-
-/**
- * @brief The access point information handle.
- * @since_ses 1
- */
-typedef struct smartthings_ap_info_s *smartthings_ap_info_h;
-
-/**
- * @brief The device provisioning information handle.
- * @since_ses 1
- */
-typedef struct smartthings_device_prov_info_s *smartthings_device_prov_info_h;
-
-/**
- * @brief The cloud information handle for cloud sign-up.
- * @since_ses 1
- */
-typedef struct smartthings_cloud_info_s *smartthings_cloud_info_h;
-
-/**
- * @brief The access point list handle.
- * @since_ses 1
- */
-typedef struct smartthings_ap_list_s *smartthings_ap_list_h;
-
-/**
- * @brief Callback for status of connection to SmartThings Thing agent.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks When callback is called, user can see connection status as #smartthings_connection_status_e enumeration value.
- *
- * @param[in] result The result of connection operation
- * @param[in] handle The SmartThings handle
- * @param[in] status The status of connection
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_initialize()
- */
-typedef void (*smartthings_connection_status_cb)(smartthings_h handle, smartthings_connection_status_e status, void *user_data);
-
-/**
- * @brief Callback for SmartThings Thing status.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks When callback is called, user can see SmartThings status as #smartthings_status_e enumeration value.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] status The status of SmartThings
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_set_status_changed_cb()
- * @see smartthings_unset_status_changed_cb()
- */
-typedef void (*smartthings_status_changed_cb)(smartthings_h handle, smartthings_status_e status, void *user_data);
-
-/**
- * @brief Callback for getting user's input regarding mutual verification.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks When callback is called, user can send a confirmation for mutual verification as true or false.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_set_user_confirm_cb()
- * @see smartthings_unset_user_confirm_cb()
- */
-typedef void (*smartthings_user_confirm_cb)(smartthings_h handle, void *user_data);
-
-/**
- * @brief Callback for getting user's opinion regarding device reset.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks When callback is called, user can sends a confirmation for reset as true or false.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_set_reset_confirm_cb()
- * @see smartthings_unset_reset_confirm_cb()
- */
-typedef void (*smartthings_reset_confirm_cb)(smartthings_h handle, void *user_data);
-
-/**
- * @brief Callback for result of reset operation.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks When callback is called, user can check reset operation succeeds or fails.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] result The result of reset
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_set_reset_result_cb()
- * @see smartthings_unset_reset_result_cb()
- */
-typedef void (*smartthings_reset_result_cb)(smartthings_h handle, bool result, void *user_data);
-
-/**
- * @brief Callback for carrying the randomly generated PIN information.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks The @a pin can be used only in the callback. To use outside, make a copy.
- * @remarks When callback is called, user can see PIN value and length.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] pin The PIN data in string format
- * @param[in] size The PIN length of @a pin
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_set_pin_cb()
- * @see smartthings_unset_pin_cb()
- */
-typedef void (*smartthings_pin_generated_cb)(smartthings_h handle, const char* pin, size_t size, void *user_data);
-
-/**
- * @brief Callback for informing the application to close the PIN display.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks When callback is called, user can know PIN based ownership transfer is finished.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_set_pin_cb()
- * @see smartthings_unset_pin_cb()
- */
-typedef void (*smartthings_pin_display_close_cb)(smartthings_h handle, void *user_data);
-
-/**
- * @brief Callback for informing Wi-Fi AP information to connect.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks The @a ap_info_h should not be released.
- * @remarks The @a ap_info_h will be released when smartthings_unset_wifi_ap_provisioning_cb() is called.
- * @remarks When callback is called, user can get Wi-Fi provisioning information.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] ap_info_h The AP information handle
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_set_wifi_ap_provisioning_cb()
- * @see smartthings_unset_wifi_ap_provisioning_cb()
- */
-typedef void (*smartthings_wifi_ap_provisioning_cb)(smartthings_h handle, smartthings_ap_info_h ap_info_h, void *user_data);
-
-/**
- * @brief Callback for informing device provisioning information.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks The @a dev_prov_h should not be released.
- * @remarks The @a dev_prov_h will be released when smartthings_unset_device_provisioning_cb() is called.
- * @remarks When callback is called, user can get device provisioning information.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] dev_prov_h The device provisioning information handle
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_set_device_provisioning_cb()
- * @see smartthings_unset_device_provisioning_cb()
- */
-typedef void (*smartthings_device_provisioning_cb)(smartthings_h handle, smartthings_device_prov_info_h dev_prov_h, void *user_data);
-
-/**
- * @brief Callback for informing the scan AP list request.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks When callback is called, user scans access points, sets AP list and sends it to agent.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] req_id The request ID
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_set_scan_ap_cb()
- * @see smartthings_unset_scan_ap_cb()
- */
-typedef void (*smartthings_scan_ap_cb)(smartthings_h handle, int req_id, void *user_data);
-
-/**
- * @brief Callback for informing the stop soft AP request.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks When callback is called, user stops soft AP.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_set_stop_soft_ap_cb()
- * @see smartthings_unset_stop_soft_ap_cb()
- */
-typedef void (*smartthings_stop_soft_ap_cb)(smartthings_h handle, void *user_data);
-
-/**
- * @brief Creates a handle and connects to agent.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks The @a handle must be released using smartthings_deinitialize().
- * @remarks Ths function returns #SMARTTHINGS_ERROR_PERMISSION_DENIED\n
- *          if the application has no app-defined privilege for 'http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master'.
- *
- * @param[out] handle The SmartThings handle to be newly created on success
- * @param[in] connection_status_cb The RPC connection status callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_NOT_SUPPORTED Not supported
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_deinitialize()
- */
-int smartthings_initialize(smartthings_h *handle,
-						smartthings_connection_status_cb connection_status_cb,
-						void *user_data);
-
-/**
- * @brief Deinitializes a handle and disconnects from the agent.
- * @since_ses 1
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- *
- * @see smartthings_initialize()
- */
-int smartthings_deinitialize(smartthings_h handle);
-
-/**
- * @brief Starts SmartThings Thing operation.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_stop()
- */
-int smartthings_start(smartthings_h handle);
-
-/**
- * @brief Stops SmartThings Thing operation.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_start()
- */
-int smartthings_stop(smartthings_h handle);
-
-/**
- * @brief Sets thing status changed callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks Only one callback function can be set with this function.
- * @remarks If multiple callbacks are set, the last one is registered only.
- * @remarks Callback is called when SmartThings status is changed.
- * @remarks When callback is called, user can get SmartThings status as #smartthings_status_e enumeration value.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] status_cb The status changed callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_unset_status_changed_cb()
- */
-int smartthings_set_status_changed_cb(smartthings_h handle,
-								smartthings_status_changed_cb status_cb,
-								void *user_data);
-
-/**
- * @brief Unsets thing status changed callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_status_changed_cb()
- */
-int smartthings_unset_status_changed_cb(smartthings_h handle);
-
-/**
- * @brief Sets test certificate files.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks These files should be placed in 'res' directory of application.
- * @remarks This function is needed only for using test certificate.
- * @remarks This function can be used before smartthings_start()
- *
- * @param[in] handle The SmartThings handle
- * @param[in] certificate The certificate file
- * @param[in] private_key The private key file
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- */
-int smartthings_set_certificate_file(smartthings_h handle, const char *certificate, const char *private_key);
-
-/**
- * @brief Sets device property for Easy-setup.
- * @since_ses 1
- *
- * @remarks This function can be used before smartthings_start()
- *
- * @param[in] handle The SmartThings handle
- * @param[in] dev_name The device name
- * @param[in] wifi_mode The supported Wi-Fi mode (bit masked value for #smartthings_wifi_mode_e)
- * @param[in] wifi_freq The supported Wi-Fi frequency (bit masked value for #smartthings_wifi_freq_e)
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_set_device_property(smartthings_h handle, const char* dev_name, int wifi_mode, int wifi_freq);
-
-/**
- * @brief Gets a device ID.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks The @a device_id should be released using free().
- *
- * @param[in] handle The SmartThings handle
- * @param[out] device_id The device ID
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- */
-int smartthings_get_device_id(smartthings_h handle, char **device_id);
-
-/**
- * @brief Gets a Easy-setup status.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- * @param[out] is_completed The status of Easy-setup whether it is completed or not
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- */
-int smartthings_get_easysetup_status(smartthings_h handle, bool *is_completed);
-
-/**
- * @brief Starts Easy-setup mode.
- *
- * @details This function requests for turning on soft AP to SmartThings Thing agent.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing \n
- *            %http://tizen.org/privilege/softap
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_stop_easysetup()
- */
-int smartthings_start_easysetup(smartthings_h handle);
-
-/**
- * @brief Stops Easy-setup mode.
- *
- * @details This function requests for turning off soft AP to SmartThings Thing agent.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing \n
- *            %http://tizen.org/privilege/softap
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_start_easysetup()
- */
-int smartthings_stop_easysetup(smartthings_h handle);
-
-/**
- * @brief Sets callback for getting user confirmation for mutual verification based just work ownership transfer.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks Only one callback function can be set with this function.
- * @remarks If multiple callbacks are set, the last one is registered only.
- * @remarks Callback is called when it needs user's confirm for mutual verification based just work ownership transfer.
- * @remarks When callback is called, user can send a confirmation for mutual verification based just work ownership transfer as true or false.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] confirm_cb The user confirm callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_unset_user_confirm_cb()
- */
-int smartthings_set_user_confirm_cb(smartthings_h handle,
-								smartthings_user_confirm_cb confirm_cb,
-								void *user_data);
-
-/**
- * @brief Unsets user confirmation callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_user_confirm_cb()
- */
-int smartthings_unset_user_confirm_cb(smartthings_h handle);
-
-/**
- * @brief Sets reset confirmation callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks Only one callback function can be set with this function.
- * @remarks If multiple callbacks are set, the last one is registered only.
- * @remarks Callback is called when it needs user's confirm for reset.
- * @remarks When callback is called, user can send a confirmation for reset as true or false.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] confirm_cb The reset confirm callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_unset_reset_confirm_cb()
- */
-int smartthings_set_reset_confirm_cb(smartthings_h handle,
-								smartthings_reset_confirm_cb confirm_cb,
-								void *user_data);
-
-/**
- * @brief Unsets reset confirmation callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_reset_confirm_cb()
- */
-int smartthings_unset_reset_confirm_cb(smartthings_h handle);
-
-/**
- * @brief Sets reset result callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks Only one callback function can be set with this function.
- * @remarks If multiple callbacks are set, the last one is registered only.
- * @remarks Callback is called when reset operation returns its result.
- * @remarks When callback is called, user can check reset operation succeeds or fails.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] reset_result_cb The reset result callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_unset_reset_result_cb()
- */
-int smartthings_set_reset_result_cb(smartthings_h handle,
-								smartthings_reset_result_cb reset_result_cb,
-								void *user_data);
-
-/**
- * @brief Unsets reset result callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_reset_result_cb()
- */
-int smartthings_unset_reset_result_cb(smartthings_h handle);
-
-
-/**
- * @brief Sets callback for getting randomly generated PIN for the PIN-based ownership transfer request.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks Only one callback function can be set with this function.
- * @remarks If multiple callbacks are set, the last one is registered only.
- * @remarks @a generated_cb callback is called when PIN is generated.
- * @remarks @a close_cb callback is called when PIN based ownership transfer is finished.
- * @remarks When @a generated_cb callback is called, user can see PIN value and length.
- * @remarks When @a close_cb callback is called, user can know PIN based ownership transfer is finished.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] generated_cb The PIN generation callback to register
- * @param[in] close_cb The PIN display close callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_unset_pin_cb()
- */
-int smartthings_set_pin_cb(smartthings_h handle,
-								smartthings_pin_generated_cb generated_cb,
-								smartthings_pin_display_close_cb close_cb,
-								void *user_data);
-
-/**
- * @brief Unsets PIN callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_pin_cb()
- */
-int smartthings_unset_pin_cb(smartthings_h handle);
-
-/**
- * @brief Sets callback for getting Wi-Fi AP information during Easy-setup.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks Only one callback function can be set with this function.
- * @remarks If multiple callbacks are set, the last one is registered only.
- * @remarks Callback is called when Wi-Fi provisioning event occurs.
- * @remarks When callback is called, user can get Wi-Fi provisioning information.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] wifi_ap_cb The Wi-Fi AP callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_unset_wifi_ap_provisioning_cb()
- */
-int smartthings_set_wifi_ap_provisioning_cb(smartthings_h handle,
-								smartthings_wifi_ap_provisioning_cb wifi_ap_cb,
-								void *user_data);
-
-/**
- * @brief Unsets callback for getting Wi-Fi AP information during Easy-setup.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_wifi_ap_provisioning_cb()
- */
-int smartthings_unset_wifi_ap_provisioning_cb(smartthings_h handle);
-
-/**
- * @brief Sets callback for getting device provisioning information.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks Only one callback function can be set with this function.
- * @remarks If multiple callbacks are set, the last one is registered only.
- * @remarks Callback is called when device provisioning event occurs.
- * @remarks When callback is called, user can get device provisioning information.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] dev_prov_cb The device provisioning callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_unset_device_provisioning_cb()
- */
-int smartthings_set_device_provisioning_cb(smartthings_h handle,
-								smartthings_device_provisioning_cb dev_prov_cb,
-								void *user_data);
-
-/**
- * @brief Unsets callback for getting device provisioning information.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_device_provisioning_cb()
- */
-int smartthings_unset_device_provisioning_cb(smartthings_h handle);
-
-/**
- * @brief Sets callback for informing the scan AP list request.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks Only one callback function can be set with this function.
- * @remarks If multiple callbacks are set, the last one is registered only.
- * @remarks Callback is called when GET request for access point list.
- * @remarks When callback is called, user scans access points, sets AP list and sends it to agent.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] scan_ap_cb The callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_unset_scan_ap_cb()
- * @see smartthings_send_ap_list()
- */
-int smartthings_set_scan_ap_cb(smartthings_h handle,
-								smartthings_scan_ap_cb scan_ap_cb,
-								void *user_data);
-
-/**
- * @brief Unsets callback for informing the scan AP list request.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_scan_ap_cb()
- */
-int smartthings_unset_scan_ap_cb(smartthings_h handle);
-
-/**
- * @brief Sets callback for informing the stop soft AP request.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks Only one callback function can be set with this function.
- * @remarks If multiple callbacks are set, the last one is registered only.
- * @remarks Callback is called when POST request for stopping soft AP.
- * @remarks When callback is called, user stops soft AP.
- *
- * @param[in] handle The SmartThings handle
- * @param[in] stop_soft_ap_cb The callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_unset_stop_soft_ap_cb()
- */
-int smartthings_set_stop_soft_ap_cb(smartthings_h handle,
-								smartthings_stop_soft_ap_cb stop_soft_ap_cb,
-								void *user_data);
-
-/**
- * @brief Unsets callback for informing the stop soft AP request.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_stop_soft_ap_cb()
- */
-int smartthings_unset_stop_soft_ap_cb(smartthings_h handle);
-
-/**
- * @brief Sends a user confirmation for MUTUAL VERIFICATION BASED JUST WORK Ownership transfer.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing \n
- *            %http://tizen.org/privilege/internet
- *
- * @param[in] handle The SmartThings handle
- * @param[in] confirm The user confirmation for OTM(ownership transfer method)
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_user_confirm_cb()
- * @see smartthings_unset_user_confirm_cb()
- */
-int smartthings_send_user_confirm(smartthings_h handle, bool confirm);
-
-
-/**
- * @brief Sends a reset confirmation.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing \n
- *            %http://tizen.org/privilege/internet
- *
- * @param[in] handle The SmartThings handle
- * @param[in] confirm The reset confirmation
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_reset_confirm_cb()
- * @see smartthings_unset_reset_confirm_cb()
- */
-int smartthings_send_reset_confirm(smartthings_h handle, bool confirm);
-
-/**
- * @brief Sends a reset command for resetting the device's Cloud signup and Easy-setup.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing \n
- *            %http://tizen.org/privilege/internet
- *
- * @param[in] handle The SmartThings handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_set_reset_result_cb()
- * @see smartthings_unset_reset_result_cb()
- */
-int smartthings_reset(smartthings_h handle);
-
-/**
- * @brief Gets SSID of access point.
- * @since_ses 1
- *
- * @remarks The @a ssid should be released using free().
- *
- * @param[in] ap_info_h The SmartThings AP information handle
- * @param[out] ssid The SSID name
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- *
- * @see smartthings_set_wifi_ap_provisioning_cb()
- * @see smartthings_unset_wifi_ap_provisioning_cb()
- */
-int smartthings_apinfo_get_ssid(smartthings_ap_info_h ap_info_h, char **ssid);
-
-/**
- * @brief Gets password of access point.
- * @since_ses 1
- *
- * @remarks The @a pwd should be released using free().
- *
- * @param[in] ap_info_h The SmartThings AP information handle
- * @param[out] pwd The password
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- *
- * @see smartthings_set_wifi_ap_provisioning_cb()
- * @see smartthings_unset_wifi_ap_provisioning_cb()
- */
-int smartthings_apinfo_get_password(smartthings_ap_info_h ap_info_h, char **pwd);
-
-/**
- * @brief Gets authentification type of access point.
- * @since_ses 1
- *
- * @param[in] ap_info_h The SmartThings AP information handle
- * @param[out] authtype The authentification type
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- *
- * @see smartthings_set_wifi_ap_provisioning_cb()
- * @see smartthings_unset_wifi_ap_provisioning_cb()
- */
-int smartthings_apinfo_get_authtype(smartthings_ap_info_h ap_info_h, smartthings_wifi_authtype_e *authtype);
-
-/**
- * @brief Gets encryption type of access point.
- * @since_ses 1
- *
- * @param[in] ap_info_h The SmartThings AP information handle
- * @param[out] enctype The encryption type
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- *
- * @see smartthings_set_wifi_ap_provisioning_cb()
- * @see smartthings_unset_wifi_ap_provisioning_cb()
- */
-int smartthings_apinfo_get_enctype(smartthings_ap_info_h ap_info_h, smartthings_wifi_enctype_e *enctype);
-
-/**
- * @brief Gets channel information of access point.
- * @since_ses 1
- *
- * @param[in] ap_info_h The SmartThings AP information handle
- * @param[out] channel The frequency channel
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- *
- * @see smartthings_set_wifi_ap_provisioning_cb()
- * @see smartthings_unset_wifi_ap_provisioning_cb()
- */
-int smartthings_apinfo_get_channel(smartthings_ap_info_h ap_info_h, int *channel);
-
-/**
- * @brief Gets language of device provisioing information.
- * @since_ses 1
- *
- * @remarks The @a language should be released using free().
- *
- * @param[in] dev_prov_h The SmartThings device provisioning information handle
- * @param[out] language The IETF language tag using ISO 639X
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- *
- * @see smartthings_set_device_provisioning_cb()
- * @see smartthings_unset_device_provisioning_cb()
- */
-int smartthings_devinfo_get_language(smartthings_device_prov_info_h dev_prov_h, char **language);
-
-/**
- * @brief Gets country of device provisioing information.
- * @since_ses 1
- *
- * @remarks The @a country should be released using free().
- *
- * @param[in] dev_prov_h The SmartThings device provisioning information handle
- * @param[out] country The ISO Country Code (ISO 3166-1 Alpha-2)
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- *
- * @see smartthings_set_device_provisioning_cb()
- * @see smartthings_unset_device_provisioning_cb()
- */
-int smartthings_devinfo_get_country(smartthings_device_prov_info_h dev_prov_h, char **country);
-
-/**
- * @brief Gets datetime of device provisioing information.
- * @since_ses 1
- *
- * @remarks The @a datetime should be released using free().
- *
- * @param[in] dev_prov_h The SmartThings device provisioning information handle
- * @param[out] datetime The date and time
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- *
- * @see smartthings_set_device_provisioning_cb()
- * @see smartthings_unset_device_provisioning_cb()
- */
-int smartthings_devinfo_get_datetime(smartthings_device_prov_info_h dev_prov_h, char **datetime);
-
-/**
- * @brief Creates a SmartThings AP list handle.
- * @since_ses 1
- *
- * @remarks The @a ap_list_h must be released using smartthings_aplist_destroy().
- *
- * @param[out] ap_list_h The SmartThings AP list handle to be newly created on success
- * @param[in] count The count of AP
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OUT_OF_MEMORY Out of memory
- *
- * @see smartthings_aplist_destroy()
- */
-int smartthings_aplist_create(smartthings_ap_list_h *ap_list_h, unsigned int count);
-
-/**
- * @brief Destroys a SmartThings AP list handle.
- * @since_ses 1
- *
- * @param[in] ap_list_h The SmartThings AP list handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_aplist_create()
- */
-int smartthings_aplist_destroy(smartthings_ap_list_h ap_list_h);
-
-/**
- * @brief Sets SSID at the specific index of AP list handle.
- * @since_ses 1
- *
- * @param[in] ap_list_h The SmartThings AP list handle
- * @param[in] idx The index
- * @param[in] ssid The SSID of AP
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_aplist_create()
- * @see smartthings_aplist_destroy()
- */
-int smartthings_aplist_set_ssid(smartthings_ap_list_h ap_list_h, int idx, const char *ssid);
-
-/**
- * @brief Sets BSSID at the specific index of AP list handle.
- * @since_ses 1
- *
- * @param[in] ap_list_h The SmartThings AP list handle
- * @param[in] idx The index
- * @param[in] bssid The BSSID of AP
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_aplist_create()
- * @see smartthings_aplist_destroy()
- */
-int smartthings_aplist_set_bssid(smartthings_ap_list_h ap_list_h, int idx, const char *bssid);
-
-/**
- * @brief Sets authentification type at the specific index of AP list handle.
- * @since_ses 1
- *
- * @param[in] ap_list_h The SmartThings AP list handle
- * @param[in] idx The index
- * @param[in] authtype The authentification type of AP
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_aplist_create()
- * @see smartthings_aplist_destroy()
- */
-int smartthings_aplist_set_authtype(smartthings_ap_list_h ap_list_h, int idx, smartthings_wifi_authtype_e authtype);
-
-/**
- * @brief Sets encryption type at the specific index of AP list handle.
- * @since_ses 1
- *
- * @param[in] ap_list_h The SmartThings AP list handle
- * @param[in] idx The index
- * @param[in] enctype The encryption type of AP
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_aplist_create()
- * @see smartthings_aplist_destroy()
- */
-int smartthings_aplist_set_enctype(smartthings_ap_list_h ap_list_h, int idx, smartthings_wifi_enctype_e enctype);
-
-/**
- * @brief Sets frequency channel at the specific index of AP list handle.
- * @since_ses 1
- *
- * @param[in] ap_list_h The SmartThings AP list handle
- * @param[in] idx The index
- * @param[in] channel The frequency channel of AP
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_aplist_create()
- * @see smartthings_aplist_destroy()
- */
-int smartthings_aplist_set_channel(smartthings_ap_list_h ap_list_h, int idx, int channel);
-
-/**
- * @brief Sets signal level at the specific index of AP list handle.
- * @since_ses 1
- *
- * @param[in] ap_list_h The SmartThings AP list handle
- * @param[in] idx The index
- * @param[in] signal_level The signal level of AP
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_aplist_create()
- * @see smartthings_aplist_destroy()
- */
-int smartthings_aplist_set_signal_level(smartthings_ap_list_h ap_list_h, int idx, int signal_level);
-
-/**
- * @brief Sets max speed rate at the specific index of AP list handle.
- * @since_ses 1
- *
- * @param[in] ap_list_h The SmartThings AP list handle
- * @param[in] idx The index
- * @param[in] max_rate The max speed rate of AP
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_aplist_create()
- * @see smartthings_aplist_destroy()
- */
-int smartthings_aplist_set_max_rate(smartthings_ap_list_h ap_list_h, int idx, int max_rate);
-
-/**
- * @brief Sends the scanned AP list.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing \n
- *            %http://tizen.org/privilege/internet
- *
- * @param[in] handle The SmartThings handle
- * @param[in] ap_list_h The SmartThings AP list handle
- * @param[in] req_id The request ID
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_aplist_create()
- * @see smartthings_aplist_destroy()
- * @see smartthings_set_scan_ap_cb()
- */
-int smartthings_send_ap_list(smartthings_h handle, smartthings_ap_list_h ap_list_h, int req_id);
-
-/**
- * @brief Creates a SmartThings cloud information handle.
- * @since_ses 1
- *
- * @remarks The @a cloud_info_h must be released using smartthings_cloudinfo_destroy().
- *
- * @param[out] cloud_info_h The SmartThings cloud information handle to be newly created on success
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_OUT_OF_MEMORY Out of memory
- *
- * @see smartthings_cloudinfo_destroy()
- */
-int smartthings_cloudinfo_create(smartthings_cloud_info_h *cloud_info_h);
-
-/**
- * @brief Destroys a SmartThings cloud information handle.
- * @since_ses 1
- *
- * @param[in] cloud_info_h The SmartThings cloud information handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_cloudinfo_create()
- */
-int smartthings_cloudinfo_destroy(smartthings_cloud_info_h cloud_info_h);
-
-/**
- * @brief Sets region of cloud information.
- * @since_ses 1
- *
- * @remarks The @a region can be set to one of "global" or "china".
- * @remarks If it doesn't use this function, the @a region will be set to "global" internally.
- *
- * @param[in] cloud_info_h The SmartThings cloud information handle
- * @param[in] region The region name
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_cloudinfo_set_region(smartthings_cloud_info_h cloud_info_h, const char *region);
-
-/**
- * @brief Sets authentification provider of cloud information.
- * @since_ses 1
- *
- * @param[in] cloud_info_h The SmartThings cloud information handle
- * @param[in] auth_provider The authentification provider
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_cloudinfo_set_auth_provider(smartthings_cloud_info_h cloud_info_h, const char *auth_provider);
-
-/**
- * @brief Sets access token of cloud information.
- * @since_ses 1
- *
- * @param[in] cloud_info_h The SmartThings cloud information handle
- * @param[in] access_token The access token
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_cloudinfo_set_access_token(smartthings_cloud_info_h cloud_info_h, const char *access_token);
-
-/**
- * @brief Sets refresh token of cloud information.
- * @since_ses 1
- *
- * @param[in] cloud_info_h The SmartThings cloud information handle
- * @param[in] refresh_token The refresh token
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_cloudinfo_set_refresh_token(smartthings_cloud_info_h cloud_info_h, const char *refresh_token);
-
-/**
- * @brief Sets user ID of cloud information.
- * @since_ses 1
- *
- * @param[in] cloud_info_h The SmartThings cloud information handle
- * @param[in] user_id The user ID
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_cloudinfo_set_user_id(smartthings_cloud_info_h cloud_info_h, const char *user_id);
-
-/**
- * @brief Sets client ID of cloud information.
- * @since_ses 1
- *
- * @param[in] cloud_info_h The SmartThings cloud information handle
- * @param[in] client_id The client ID
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_cloudinfo_set_client_id(smartthings_cloud_info_h cloud_info_h, const char *client_id);
-
-/**
- * @brief Requests to sign up to cloud.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing \n
- *            %http://tizen.org/privilege/internet
- *
- * @param[in] handle The SmartThings handle
- * @param[in] cloud_info_h The handle for cloud signup
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- */
-int smartthings_sign_up_cloud(smartthings_h handle, smartthings_cloud_info_h cloud_info_h);
-
-/**
- * @brief Sets preconfigured PIN.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- * @param[in] pin The PIN code to preconfigure
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- */
-int smartthings_set_preconfigured_pin(smartthings_h handle, const char* pin);
-
-/**
- * @brief Sets MOT(multiple ownership transfer) status.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] handle The SmartThings handle
- * @param[in] enable The MOT(multiple ownership transfer) status
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_ERROR_NONE Successful
- * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
- */
-int smartthings_set_mot_status(smartthings_h handle, bool enable);
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_H__ */
diff --git a/inc/smartthings_payload.h b/inc/smartthings_payload.h
deleted file mode 100644
index 988585d..0000000
--- a/inc/smartthings_payload.h
+++ /dev/null
@@ -1,663 +0,0 @@
-/*****************************************************************
- *
- * Copyright (c) 2018 Samsung Electronics Co., Ltd. All Rights Reserved
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************/
-
-
-#ifndef __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_PAYLOAD_H__
-#define __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_PAYLOAD_H__
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdbool.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @file smartthings_payload.h
- */
-
-/**
- * @addtogroup CAPI_SMARTTHINGS_THING_PAYLOAD_MODULE
- * @{
- */
-
-/**
- * @brief The SmartThings payload handle.
- * @since_ses 1
- */
-typedef struct smartthings_payload_s *smartthings_payload_h;
-
-/**
- * @brief Creates a SmartThings payload handle.
- * @since_ses 1
- *
- * @remarks The @a payload must be released using smartthings_payload_destroy().
- * @remarks If the @a payload is set to parent payload as an object or object array
- *          using smartthings_payload_set_object() or smartthings_payload_set_object_array(),
- *          the @a payload must not be released.
-
- * @param[out] payload The SmartThings payload handle to be newly created on success
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
- *
- * @see smartthings_payload_destroy()
- */
-int smartthings_payload_create(smartthings_payload_h *payload);
-
-/**
- * @brief Destroys a SmartThings payload handle and releases all its resources.
- * @since_ses 1
- *
- * @remarks If the @a payload has child payload, its child payload will be released as well.
- *
- * @param[in] payload The SmartThings payload handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_payload_create()
- */
-int smartthings_payload_destroy(smartthings_payload_h payload);
-
-/**
- * @brief Sets an integer value for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The function replaces any existing value for the given @a attr_name.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[in] value The value to set
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_payload_set_int(smartthings_payload_h payload, const char *attr_name, int value);
-
-/**
- * @brief Sets a boolean value for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The function replaces any existing value for the given @a attr_name.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[in] value The value to set
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_payload_set_bool(smartthings_payload_h payload, const char *attr_name, bool value);
-
-/**
- * @brief Sets a double value for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The function replaces any existing value for the given @a attr_name.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[in] value The value to set
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_payload_set_double(smartthings_payload_h payload, const char *attr_name, double value);
-
-/**
- * @brief Sets a string value for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The function replaces any existing value for the given @a attr_name.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[in] value The value to set
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_payload_set_string(smartthings_payload_h payload, const char *attr_name, const char *value);
-
-/**
- * @brief Sets a byte string value and length for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The function replaces any existing value for the given @a attr_name.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[in] value The value to set
- * @param[in] length The size of value
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
- */
-int smartthings_payload_set_byte_string(smartthings_payload_h payload, const char *attr_name, const char *value, unsigned int length);
-
-/**
- * @brief Sets an object value for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The @a value is SmartThings payload handle.
- * @remarks The function replaces any existing value for the given @a attr_name.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[in] value The value to set
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_payload_set_object(smartthings_payload_h payload, const char *attr_name, smartthings_payload_h value);
-
-/**
- * @brief Sets an integer array for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The function replaces any existing array for the given @a attr_name.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[in] array The array associated with the given attribute name
- * @param[in] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_payload_set_int_array(smartthings_payload_h payload, const char *attr_name, const int *array, unsigned int length);
-
-/**
- * @brief Sets a boolean array for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The function replaces any existing array for the given @a attr_name.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[in] array The array associated with the given attribute name
- * @param[in] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_payload_set_bool_array(smartthings_payload_h payload, const char *attr_name, const bool *array, unsigned int length);
-
-/**
- * @brief Sets a double array for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The function replaces any existing array for the given @a attr_name.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[in] array The array associated with the given attribute name
- * @param[in] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_payload_set_double_array(smartthings_payload_h payload, const char *attr_name, const double *array, unsigned int length);
-
-/**
- * @brief Sets a string array for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The function replaces any existing array for the given @a attr_name.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[in] array The array associated with the given attribute name
- * @param[in] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_payload_set_string_array(smartthings_payload_h payload, const char *attr_name, const char **array, unsigned int length);
-
-/**
- * @brief Sets an object array for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The function replaces any existing array for the given @a attr_name.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[in] array The array associated with the given attribute name
- * @param[in] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
- */
-int smartthings_payload_set_object_array(smartthings_payload_h payload, const char *attr_name, smartthings_payload_h *array, unsigned int length);
-
-/**
- * @brief Adds a payload for child resource of collection resource.
- * @since_ses 1
- *
- * @remarks The @a resource_uri is key value, one of several child resources of the collection resource.
- * @remarks The @a value is SmartThings payload handle.
- * @remarks The function replaces any existing payload for the given @a resource_uri.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] resource_uri The resource URI of child resource
- * @param[in] value The payload associated with the given resource URI
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- */
-int smartthings_payload_add_collection_object(smartthings_payload_h payload, const char *resource_uri, smartthings_payload_h value);
-
-/**
- * @brief Gets an integer value for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[out] value The value associated with the given attribute name
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- */
-int smartthings_payload_get_int(smartthings_payload_h payload, const char *attr_name, int *value);
-
-/**
- * @brief Gets a boolean value for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[out] value The value associated with the given attribute name
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- */
-int smartthings_payload_get_bool(smartthings_payload_h payload, const char *attr_name, bool *value);
-
-/**
- * @brief Gets a double value for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[out] value The value associated with the given attribute name
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- */
-int smartthings_payload_get_double(smartthings_payload_h payload, const char *attr_name, double *value);
-
-/**
- * @brief Gets a string value for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The @a value should be released using free().
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[out] value The value associated with the given attribute name
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- */
-int smartthings_payload_get_string(smartthings_payload_h payload, const char *attr_name, char **value);
-
-/**
- * @brief Gets a byte string value and length for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The @a value should be released using free().
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[out] value The value associated with the given attribute name
- * @param[out] length The size of value
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- */
-int smartthings_payload_get_byte_string(smartthings_payload_h payload, const char *attr_name, char **value, unsigned int *length);
-
-/**
- * @brief Gets an object value for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The @a value is SmartThings payload handle.
- * @remarks The @a value must be released using smartthings_payload_release_object().
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[out] value The value associated with the given attribute name
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- */
-int smartthings_payload_get_object(smartthings_payload_h payload, const char *attr_name, smartthings_payload_h *value);
-
-/**
- * @brief Gets an integer array for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The @a array must be released using smartthings_payload_release_int_array().
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[out] array The array associated with the given attribute name
- * @param[out] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- *
- * @see smartthings_payload_release_int_array()
- */
-int smartthings_payload_get_int_array(smartthings_payload_h payload, const char *attr_name, int **array, unsigned int *length);
-
-/**
- * @brief Gets a boolean array for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The @a array must be released using smartthings_payload_release_bool_array().
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[out] array The array associated with the given attribute name
- * @param[out] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- *
- * @see smartthings_payload_release_bool_array()
- */
-int smartthings_payload_get_bool_array(smartthings_payload_h payload, const char *attr_name, bool **array, unsigned int *length);
-
-/**
- * @brief Gets a double array for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The @a array must be released using smartthings_payload_release_double_array().
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[out] array The array associated with the given attribute name
- * @param[out] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- *
- * @see smartthings_payload_release_double_array()
- */
-int smartthings_payload_get_double_array(smartthings_payload_h payload, const char *attr_name, double **array, unsigned int *length);
-
-/**
- * @brief Gets a string array for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The @a array must be released using smartthings_payload_release_string_array().
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[out] array The array associated with the given attribute name
- * @param[out] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- *
- * @see smartthings_payload_release_string_array()
- */
-int smartthings_payload_get_string_array(smartthings_payload_h payload, const char *attr_name, char ***array, unsigned int *length);
-
-/**
- * @brief Gets an object array for the attribute name.
- * @since_ses 1
- *
- * @remarks The @a attr_name is key value, one of several properties of the resource type.
- * @remarks The @a array is a list of SmartThings payload handle.
- * @remarks The @a array must be released using smartthings_payload_release_object_array().
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] attr_name The attribute name
- * @param[out] array The array associated with the given attribute name
- * @param[out] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- *
- * @see smartthings_payload_release_object_array()
- */
-int smartthings_payload_get_object_array(smartthings_payload_h payload, const char *attr_name, smartthings_payload_h **array, unsigned int *length);
-
-/**
- * @brief Gets a payload for child resource of collection resource.
- * @since_ses 1
- *
- * @remarks The @a resource_uri is key value, one of several child resources of the collection resource.
- * @remarks The @a value is SmartThings payload handle.
- * @remarks The @a value must be released using smartthings_payload_release_object().
- *
- * @param[in] payload The SmartThings payload handle
- * @param[in] resource_uri The resource URI of child resource
- * @param[out] value The payload associated with the given resource URI
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
- */
-int smartthings_payload_get_collection_object(smartthings_payload_h payload, const char *resource_uri, smartthings_payload_h *value);
-
-/**
- * @brief Releases an integer array of the SmartThings payload.
- * @since_ses 1
- *
- * @param[in] array The array to release
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_payload_get_int_array()
- */
-int smartthings_payload_release_int_array(int *array);
-
-/**
- * @brief Releases a boolean array of the SmartThings payload.
- * @since_ses 1
- *
- * @param[in] array The array to release
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_payload_get_bool_array()
- */
-int smartthings_payload_release_bool_array(bool *array);
-
-/**
- * @brief Releases a double array of the SmartThings payload.
- * @since_ses 1
- *
- * @param[in] array The array to release
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_payload_get_double_array()
- */
-int smartthings_payload_release_double_array(double *array);
-
-/**
- * @brief Releases a string array of the SmartThings payload.
- * @since_ses 1
- *
- * @param[in] array The array to release
- * @param[in] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_payload_get_string_array()
- */
-int smartthings_payload_release_string_array(char **array, unsigned int length);
-
-/**
- * @brief Releases an object array of the SmartThings payload.
- * @since_ses 1
- *
- * @param[in] array The array to release
- * @param[in] length The length of @a array
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_payload_get_object_array()
- */
-int smartthings_payload_release_object_array(smartthings_payload_h *array, unsigned int length);
-
-/**
- * @brief Releases a SmartThings payload.
- * @since_ses 1
- *
- * @remarks The function is different with smartthings_payload_destroy().
- * @remarks The function releases only payload value that is obtained by smartthings_payload_get_object().
- *
- * @param[in] payload The payload to release
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_payload_get_object()
- */
-int smartthings_payload_release_object(smartthings_payload_h payload);
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_PAYLOAD_H__ */
diff --git a/inc/smartthings_resource.h b/inc/smartthings_resource.h
deleted file mode 100644
index 1968c50..0000000
--- a/inc/smartthings_resource.h
+++ /dev/null
@@ -1,364 +0,0 @@
-/*****************************************************************
- *
- * Copyright (c) 2018 Samsung Electronics Co., Ltd. All Rights Reserved
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************/
-
-
-#ifndef __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_RESOURCE_H__
-#define __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_RESOURCE_H__
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdbool.h>
-#include <tizen.h>
-#include <smartthings_payload.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @file smartthings_resource.h
- */
-
-/**
- * @addtogroup CAPI_SMARTTHINGS_THING_RESOURCE_MODULE
- * @{
- */
-
-/**
- * @brief Enumeration for the SmartThings resource error.
- * @since_ses 1
- */
-typedef enum {
-	SMARTTHINGS_RESOURCE_ERROR_NONE = TIZEN_ERROR_NONE,                                /**< Successful */
-	SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER,      /**< Invalid parameter */
-	SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY,              /**< Out of memory */
-	SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED = TIZEN_ERROR_PERMISSION_DENIED,      /**< Permission denied */
-	SMARTTHINGS_RESOURCE_ERROR_NO_DATA = TIZEN_ERROR_NO_DATA,                          /**< No data */
-	SMARTTHINGS_RESOURCE_ERROR_NOT_SUPPORTED = TIZEN_ERROR_NOT_SUPPORTED,			   /**< Not supported */
-	SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED = TIZEN_ERROR_UNKNOWN - 1,             /**< Operation failed */
-	SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE = TIZEN_ERROR_UNKNOWN -2            /**< Service unavailable */
-} smartthings_resource_error_e;
-
-/**
- * @brief Enumeration for the request type of resource and collection resource.
- * @since_ses 1
- */
-typedef enum {
-	SMARTTHINGS_RESOURCE_REQUEST_GET = 0,              /**< Get request type */
-	SMARTTHINGS_RESOURCE_REQUEST_SET = 1,              /**< Set request type */
-	SMARTTHINGS_RESOURCE_REQUEST_COLLECTION_GET = 2,   /**< Get request type for collection */
-	SMARTTHINGS_RESOURCE_REQUEST_COLLECTION_SET = 3    /**< Set request type for collection */
-} smartthings_resource_req_type_e;
-
-/**
- * @brief Enumeration for RPC connection status.
- * @since_ses 1
- */
-typedef enum {
-	SMARTTHINGS_RESOURCE_CONNECTION_STATUS_CONNECTED = 0,          /**< Connection is connected */
-	SMARTTHINGS_RESOURCE_CONNECTION_STATUS_DISCONNECTED,           /**< Connection is disconnected */
-	SMARTTHINGS_RESOURCE_CONNECTION_STATUS_REJECTED,               /**< Connection is rejected */
-} smartthings_resource_connection_status_e;
-
-/**
- * @brief The SmartThings resource handle.
- * @since_ses 1
- */
-typedef struct smartthings_resource_s *smartthings_resource_h;
-
-/**
- * @brief Callback for status of connection to SmartThings Thing agent.
- * @since_ses 1
- *
- * @remarks The @a handle should not be released.
- * @remarks The @a handle is the same object for which the callback was set/added.
- * @remarks The @a handle will be released when smartthings_deinitialize() is called.
- * @remarks When callback is called, user can see connection status as #smartthings_connection_status_e enumeration value.
- *
- * @param[in] result The result of connection operation
- * @param[in] handle The SmartThings handle
- * @param[in] status The status of connection
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_resource_initialize()
- */
-typedef void (*smartthings_resource_connection_status_cb)(smartthings_resource_h handle, smartthings_resource_connection_status_e status, void *user_data);
-
-/**
- * @brief Callback for handling request(GET/SET) messages.
- * @since_ses 1
- *
- * @remarks The @a payload is NULL when @a req_type is #SMARTTHINGS_RESOURCE_REQUEST_GET.
- * @remarks The @a payload can be used only in the callback. To use outside, make a copy.
- * @remarks The @a st_h should not be released.
- * @remarks The @a st_h is the same object for which the callback was set/added.
- * @remarks The @a st_h will be released when smartthings_resource_deinitialize() is called.
- * @remarks The @a payload should not be released.
- * @remarks The @a uri can be used only in the callback. To use outside, make a copy.
- *
- * @param[in] st_h The SmartThings resource handle
- * @param[in] req_id The request ID of request message
- * @param[in] uri The resource URI
- * @param[in] req_type The request type for request message
- * @param[in] payload The payload for SET request message
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_resource_set_request_cb()
- * @see smartthings_resource_unset_request_cb()
- */
-typedef void (*smartthings_resource_request_cb)(smartthings_resource_h st_h, int req_id, const char *uri,
-												smartthings_resource_req_type_e req_type,
-												smartthings_payload_h payload, void *user_data);
-
-/**
- * @brief Callback for status of resource registration to cloud.
- * @since_ses 1
- *
- * @remarks This callback will be called when status of resource registration is changed.
- * @remarks The @a st_h should not be released.
- * @remarks The @a st_h is the same object for which the callback was set/added.
- * @remarks The @a st_h will be released when smartthings_resource_deinitialize() is called.
- * @remarks The @a is_registered will be true when resources are registered to cloud.
- *
- * @param[in] st_h The SmartThings resource handle
- * @param[in] is_registered The status of resource registration to cloud
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see smartthings_resource_set_cloud_registration_status_cb()
- * @see smartthings_resource_unset_cloud_registration_status_cb()
- */
-typedef void (*smartthings_resource_cloud_registration_status_cb)(smartthings_resource_h st_h, bool is_registered, void *user_data);
-
-
-/**
- * @brief Initializes a resource handle and connects to agent.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks The @a st_h must be released using smartthings_resource_deinitialize().
- * @remarks Ths function returns #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED\n
- *          if the application has no app-defined privilege for 'http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource'.
- *
- * @param[out] st_h The SmartThings resource handle to be newly created on success
- * @param[in] connection_status_cb The connection status callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NOT_SUPPORTED Not supported
- * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_resource_deinitialize()
- */
-int smartthings_resource_initialize(smartthings_resource_h *st_h,
-								   smartthings_resource_connection_status_cb connection_status_cb,
-								   void *user_data);
-
-/**
- * @brief Deinitializes a resource handle and disconnects from the agent.
- * @since_ses 1
- *
- * @param[in] st_h The SmartThings resource handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- *
- * @see smartthings_resource_initialize()
- */
-int smartthings_resource_deinitialize(smartthings_resource_h st_h);
-
-/**
- * @brief Sets resource request callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] st_h The SmartThings resource handle
- * @param[in] req_cb The request callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_resource_unset_request_cb()
- */
-int smartthings_resource_set_request_cb(smartthings_resource_h st_h,
-								smartthings_resource_request_cb req_cb,
-								void *user_data);
-
-/**
- * @brief Unsets resource request callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] st_h The SmartThings resource handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_resource_set_request_cb()
- */
-int smartthings_resource_unset_request_cb(smartthings_resource_h st_h);
-
-/**
- * @brief Sends response for resource request message.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing \n
- *            %http://tizen.org/privilege/internet
- *
- * @param[in] st_h The SmartThings resource handle
- * @param[in] req_id The request ID of request message
- * @param[in] uri The resource URI
- * @param[in] payload The payload of response message
- * @param[in] result The result of response
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
- */
-int smartthings_resource_send_response(smartthings_resource_h st_h, int req_id, const char *uri, smartthings_payload_h payload, bool result);
-
-/**
- * @brief Notifies resource change.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing \n
- *            %http://tizen.org/privilege/internet
- *
- * @param[in] st_h The SmartThings resource handle
- * @param[in] uri The resource URI
- * @param[in] payload The payload of response message
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
- */
-int smartthings_resource_notify(smartthings_resource_h st_h, const char *uri, smartthings_payload_h payload);
-
-/**
- * @brief Gets resource URIs.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @remarks The @a uris should be released using free().
- *
- * @param[in] st_h The SmartThings resource handle
- * @param[out] count The resource count
- * @param[out] uris The resource URI list
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
- */
-int smartthings_resource_get_uris(smartthings_resource_h st_h, int *count, char ***uris);
-
-/**
- * @brief Sets cloud registration callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] st_h The SmartThings resource handle
- * @param[in] reg_cb The callback to register
- * @param[in] user_data The user data to be passed to the callback function
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_resource_unset_cloud_registration_status_cb()
- */
-int smartthings_resource_set_cloud_registration_status_cb(smartthings_resource_h st_h,
-								smartthings_resource_cloud_registration_status_cb reg_cb,
-								void *user_data);
-
-/**
- * @brief Unsets cloud registration callback.
- * @since_ses 1
- * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
- *            %http://tizen.org/privilege/appmanager.launch \n
- *            %http://tizen.org/privilege/datasharing
- *
- * @param[in] st_h The SmartThings resource handle
- *
- * @return @c 0 on success,
- *         otherwise a negative error value
- * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
- * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
- * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
- * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
- *
- * @see smartthings_resource_set_cloud_registration_status_cb()
- */
-int smartthings_resource_unset_cloud_registration_status_cb(smartthings_resource_h st_h);
-
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_RESOURCE_H__ */
diff --git a/src/controller.c b/src/controller.c
index bbb2110..83d2f25 100755
--- a/src/controller.c
+++ b/src/controller.c
@@ -22,7 +22,7 @@
 #include <Ecore.h>
 
 #include "log.h"
-#include "resource/resource_infrared_motion_sensor.h"
+#include "resource/resource_infrared_motion.h"
 #include "resource/resource_led.h"
 
 // Timer duration
@@ -34,10 +34,6 @@
 // LED sensor information
 #define SENSOR_LED_GPIO_NUMBER (24)
 
-typedef struct app_data_s {
-	Ecore_Timer *getter_timer;
-} app_data;
-
 static int _change_led_state(int state) {
 	int ret = 0;
 
@@ -52,31 +48,17 @@ static int _change_led_state(int state) {
 	return 0;
 }
 
-static Eina_Bool _get_motion_set_led()
+static void motion_interrupted_cb(uint32_t motion_value, void *user_data)
 {
-	int ret = 0;
-	uint32_t value = 0;
-
-	if (!ad) {
-		_E("failed to get app_data");
-		return ECORE_CALLBACK_CANCEL;
-	}
-
-	// Get value from motion sensor
-	ret = resource_read_infrared_motion_sensor(SENSOR_MOTION_GPIO_NUMBER, &value);
-	if (ret != 0) {
-		_E("cannot read data from the infrared motion sensor");
-		return ECORE_CALLBACK_CANCEL;
-	}
-
-	_D("Detected motion value is: %u", value);
+	_D("Detected motion value is: %u", motion_value);
 
 	// Set LED light with value
-	_change_led_state(value);
+	_change_led_state(motion_value);
 
-	return ECORE_CALLBACK_RENEW;
+	return;
 }
 
+
 static bool service_app_create(void *user_data)
 {
 	return true;
@@ -84,52 +66,37 @@ static bool service_app_create(void *user_data)
 
 static void service_app_control(app_control_h app_control, void *user_data)
 {
-	app_data *ad = user_data;
-
-	// Delete old timer if there is one
-	if (ad->getter_timer)
-		ecore_timer_del(ad->getter_timer);
+	int ret = 0;
 
-	// Create a timer to call the given function in given period of time
-	ad->getter_timer = ecore_timer_add(TIMER_GATHER_INTERVAL, _get_motion_set_led, ad);
-	if (!ad->getter_timer) {
-		_E("Failed to add getter timer");
+	// Set an interrupted user callback to be invoked when interrupt is triggered on motion sensor
+	ret = resource_set_interrupted_cb_infrared_motion(SENSOR_MOTION_GPIO_NUMBER, motion_interrupted_cb, NULL);
+	if (ret != 0) {
+		_E("cannot set interrupted callback for motion sensor");
 		return;
 	}
 }
 
 static void service_app_terminate(void *user_data)
 {
-	app_data *ad = user_data;
-
-	// Delete timer
-	if (ad->getter_timer)
-		ecore_timer_del(ad->getter_timer);
+	resource_unset_interrupted_cb_infrared_motion(SENSOR_MOTION_GPIO_NUMBER);
 
 	// Turn off LED light with __set_led()
 	_change_led_state(0);
 
 	// Close Motion and LED resources
-	resource_close_infrared_motion_sensor();
+	resource_close_infrared_motion();
 	resource_close_led();
 
-	// Free app data
-	free(ad);
-
 	FN_END;
 }
 
 int main(int argc, char *argv[])
 {
-	app_data *ad = NULL;
 	service_app_lifecycle_callback_s event_callback;
 
-	ad = calloc(1, sizeof(app_data));
-	retv_if(!ad, -1);
-
 	event_callback.create = service_app_create;
 	event_callback.terminate = service_app_terminate;
 	event_callback.app_control = service_app_control;
 
-	return service_app_main(argc, argv, &event_callback, ad);
+	return service_app_main(argc, argv, &event_callback, NULL);
 }
diff --git a/src/resource/resource_infrared_motion.c b/src/resource/resource_infrared_motion.c
new file mode 100755
index 0000000..2879221
--- /dev/null
+++ b/src/resource/resource_infrared_motion.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <peripheral_io.h>
+#include <stdlib.h>
+
+#include "resource/resource_infrared_motion.h"
+#include "log.h"
+
+static peripheral_gpio_h g_sensor_h = NULL;
+static int g_pin_num = -1;
+static resource_infrared_motion_interrupted_data *g_interrupted_data = NULL;
+
+int _resource_validate_infrared_motion(int pin_num)
+{
+	int ret = PERIPHERAL_HANDLE_ERROR_NONE;
+
+	if (!g_sensor_h)
+	{
+		ret = PERIPHERAL_HANDLE_ERROR_NOT_OPEN;
+	} else if (g_pin_num != pin_num) {
+		ret = PERIPHERAL_HANDLE_ERROR_INVALID_PIN;
+	}
+
+	return ret;
+}
+
+int resource_open_infrared_motion(int pin_num)
+{
+	peripheral_gpio_h temp = NULL;
+
+	int ret = peripheral_gpio_open(pin_num, &temp);
+	if (ret) {
+		peripheral_gpio_close(temp);
+		_E("peripheral_gpio_open failed.");
+		return -1;
+	}
+
+	ret = peripheral_gpio_set_direction(temp, PERIPHERAL_GPIO_DIRECTION_IN);
+	if (ret) {
+		peripheral_gpio_close(temp);
+		_E("peripheral_gpio_set_direction failed.");
+		return -1;
+	}
+
+	g_sensor_h = temp;
+	g_pin_num = pin_num;
+
+	return 0;
+}
+
+int resource_read_infrared_motion(int pin_num, uint32_t *out_value)
+{
+	int ret = PERIPHERAL_ERROR_NONE;
+
+	if (_resource_validate_infrared_motion(pin_num) == PERIPHERAL_HANDLE_ERROR_NOT_OPEN) {
+		resource_open_infrared_motion(pin_num);
+	}
+	if (_resource_validate_infrared_motion(pin_num) == PERIPHERAL_HANDLE_ERROR_INVALID_PIN) {
+		_E("Invalid pin number.");
+		return -1;
+	}
+
+	ret = peripheral_gpio_read(g_sensor_h, out_value);
+	retv_if(ret < 0, -1);
+
+	return 0;
+}
+
+void resource_close_infrared_motion(void)
+{
+	if (!g_sensor_h) return;
+
+	_I("Infrared Motion Sensor is finishing...");
+
+	peripheral_gpio_close(g_sensor_h);
+
+	if (g_interrupted_data != NULL) {
+		free(g_interrupted_data);
+		g_interrupted_data = NULL;
+	}
+	g_sensor_h = NULL;
+	g_pin_num = -1;
+}
+
+void _resoucre_motion_interrupted_cb (peripheral_gpio_h gpio, peripheral_error_e error, void *user_data)
+{
+	if (!g_sensor_h) return;
+
+	if (g_interrupted_data->is_called_first_time) {
+		error = peripheral_gpio_read(g_sensor_h, &g_interrupted_data->motion_value);
+		if (error) {
+			return;
+		}
+
+		g_interrupted_data->is_called_first_time = 0;
+	} else {
+		// toggle g_interrupted_data->motion_value
+		g_interrupted_data->motion_value = !g_interrupted_data->motion_value;
+	}
+
+	g_interrupted_data->interrupted_cb(g_interrupted_data->motion_value, g_interrupted_data->interrupted_cb_user_data);
+}
+
+int resource_set_interrupted_cb_infrared_motion(int pin_num, resource_infrared_motion_interrupted_cb interrupted_cb, void *user_data)
+{
+	int ret = PERIPHERAL_ERROR_NONE;
+	if (g_interrupted_data == NULL) {
+		g_interrupted_data = calloc(1, sizeof(resource_infrared_motion_interrupted_data));
+	}
+
+	if (_resource_validate_infrared_motion(pin_num) == PERIPHERAL_HANDLE_ERROR_NOT_OPEN) {
+		resource_open_infrared_motion(pin_num);
+	}
+	if (_resource_validate_infrared_motion(pin_num) == PERIPHERAL_HANDLE_ERROR_INVALID_PIN) {
+		_E("Invalid pin number.");
+		return -1;
+	}
+
+	g_interrupted_data->interrupted_cb = interrupted_cb;
+	g_interrupted_data->interrupted_cb_user_data = user_data;
+	g_interrupted_data->motion_value = 0;
+	g_interrupted_data->is_called_first_time = 1;
+
+	ret = peripheral_gpio_set_edge_mode(g_sensor_h, PERIPHERAL_GPIO_EDGE_BOTH);
+	retv_if(ret < 0, -1);
+
+	ret = peripheral_gpio_set_interrupted_cb(g_sensor_h, _resoucre_motion_interrupted_cb, g_interrupted_data);
+	retv_if(ret < 0, -1);
+
+	return 0;
+}
+
+int resource_unset_interrupted_cb_infrared_motion(int pin_num)
+{
+	int ret = PERIPHERAL_ERROR_NONE;
+
+	if (g_interrupted_data != NULL) {
+		free(g_interrupted_data);
+		g_interrupted_data = NULL;
+	}
+
+	if (_resource_validate_infrared_motion(pin_num) == PERIPHERAL_HANDLE_ERROR_NOT_OPEN) {
+		_E("No open handle.");
+		return -1;
+	}
+	else if (_resource_validate_infrared_motion(pin_num) == PERIPHERAL_HANDLE_ERROR_INVALID_PIN) {
+		_E("Invalid pin number.");
+		return -1;
+	}
+
+	ret = peripheral_gpio_unset_interrupted_cb(g_sensor_h);
+	retv_if(ret < 0, -1);
+
+	return 0;
+}
diff --git a/src/resource/resource_infrared_motion_sensor.c b/src/resource/resource_infrared_motion_sensor.c
deleted file mode 100755
index d0605e6..0000000
--- a/src/resource/resource_infrared_motion_sensor.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (c) 2018 Samsung Electronics Co., Ltd.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <peripheral_io.h>
-
-#include "log.h"
-
-static peripheral_gpio_h g_sensor_h = NULL;
-static int g_pin_num = -1;
-
-void resource_close_infrared_motion_sensor(void)
-{
-	if (!g_sensor_h) return;
-
-	_I("Infrared Motion Sensor is finishing...");
-
-	peripheral_gpio_close(g_sensor_h);
-
-	g_sensor_h = NULL;
-	g_pin_num = -1;
-}
-
-int resource_read_infrared_motion_sensor(int pin_num, uint32_t *out_value)
-{
-	int ret = PERIPHERAL_ERROR_NONE;
-
-	if (!g_sensor_h) {
-		peripheral_gpio_h temp = NULL;
-
-		ret = peripheral_gpio_open(pin_num, &temp);
-		retv_if(ret, -1);
-
-		ret = peripheral_gpio_set_direction(temp, PERIPHERAL_GPIO_DIRECTION_IN);
-		if (ret) {
-			peripheral_gpio_close(temp);
-			_E("peripheral_gpio_set_direction failed.");
-			return -1;
-		}
-
-		g_sensor_h = temp;
-		g_pin_num = pin_num;
-	}
-
-	if (g_pin_num != pin_num) {
-		_E("Invalid pin number.");
-		return -1;
-	}
-
-	ret = peripheral_gpio_read(g_sensor_h, out_value);
-	retv_if(ret < 0, -1);
-
-	return 0;
-}