diff options
Diffstat (limited to 'mobile')
27 files changed, 746 insertions, 0 deletions
diff --git a/mobile/AUTHORS b/mobile/AUTHORS new file mode 100644 index 0000000..ef316d6 --- /dev/null +++ b/mobile/AUTHORS @@ -0,0 +1,3 @@ +SooChan Lim <sc1.lim@samsung.com> +Sung-Jin Park <sj76.park@samsung.com> +Sangjin LEE <lsj119@samsung.com> diff --git a/mobile/COPYING b/mobile/COPYING new file mode 100644 index 0000000..b5aebf0 --- /dev/null +++ b/mobile/COPYING @@ -0,0 +1,20 @@ +Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. All rights reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. + diff --git a/mobile/ChangeLog b/mobile/ChangeLog new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/mobile/ChangeLog diff --git a/mobile/INSTALL b/mobile/INSTALL new file mode 100644 index 0000000..8b82ade --- /dev/null +++ b/mobile/INSTALL @@ -0,0 +1,291 @@ +Installation Instructions +************************* + +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, +2006, 2007, 2008 Free Software Foundation, Inc. + + This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + +Basic Installation +================== + + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 6. Often, you can also type `make uninstall' to remove the installed + files again. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + +Installation Names +================== + + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `<wchar.h>' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--prefix=DIR' + Use DIR as the installation prefix. *Note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/mobile/LICENSE.MIT b/mobile/LICENSE.MIT new file mode 100644 index 0000000..1c81bdc --- /dev/null +++ b/mobile/LICENSE.MIT @@ -0,0 +1,20 @@ +Copyright (c) 2011 Samsung Electronics Co., Ltd All Rights Reserved + +Permission to use, copy, modify, distribute, and sell this software +and its documentation for any purpose is hereby granted without +fee, provided that the above copyright notice appear in all copies +and that both that copyright notice and this permission notice +appear in supporting documentation, and that the name of Red Hat +not be used in advertising or publicity pertaining to distribution +of the software without specific, written prior permission. Red +Hat makes no representations about the suitability of this software +for any purpose. It is provided "as is" without express or implied +warranty. + +THE AUTHORS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN +NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS +OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, +NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN +CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. diff --git a/mobile/Makefile.am b/mobile/Makefile.am new file mode 100644 index 0000000..f6c30fd --- /dev/null +++ b/mobile/Makefile.am @@ -0,0 +1,29 @@ +# Copyright (c) 2011 Samsung Electronics Co., Ltd All Rights Reserved +# +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of Red Hat not be used in +# advertising or publicity pertaining to distribution of the software without +# specific, written prior permission. Red Hat makes no +# representations about the suitability of this software for any purpose. It +# is provided "as is" without express or implied warranty. +# +# RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +# EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR +# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, +# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER +# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +# PERFORMANCE OF THIS SOFTWARE. +# + +bin_SCRIPTS = $(top_srcdir)/@ARCH@-common/startx + +confdir = @CONF_PREFIX@/etc/X11 +conf_DATA = $(top_srcdir)/@ARCH@-common/xorg.conf \ + $(top_srcdir)/@ARCH@-common/Xresources + + + diff --git a/mobile/NEWS b/mobile/NEWS new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/mobile/NEWS diff --git a/mobile/NOTICE b/mobile/NOTICE new file mode 100644 index 0000000..c10a9c5 --- /dev/null +++ b/mobile/NOTICE @@ -0,0 +1,3 @@ +Copyright (c) 2011 Samsung Electronics Co., Ltd. All rights reserved. +Except as noted, this software is licensed under MIT License. +Please, see the LICENSE.MIT file for MIT License terms and conditions. diff --git a/mobile/README b/mobile/README new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/mobile/README diff --git a/mobile/arm-common/Xmodmap b/mobile/arm-common/Xmodmap new file mode 100644 index 0000000..be42e4b --- /dev/null +++ b/mobile/arm-common/Xmodmap @@ -0,0 +1,25 @@ +keycode 123 = XF86AudioRaiseVolume +keycode 122 = XF86AudioLowerVolume +keycode 231 = Cancel +keycode 177 = XF86Send +keycode 147 = XF86Phone +keycode 166 = XF86Stop +keycode 225 = XF86Search +keycode 124 = XF86PowerOff +keycode 179 = XF86WebCam +keycode 220 = XF86Pictures +keycode 208 = XF86AudioPlay +keycode 209 = XF86AudioPause +keycode 174 = XF86AudioStop +keycode 171 = XF86AudioNext +keycode 173 = XF86AudioPrev +keycode 176 = XF86AudioRewind +keycode 216 = XF86AudioForward +keycode 234 = XF86AudioMedia +keycode 153 = +keycode 239 = +keycode 136 = +keycode 140 = +keycode 182 = +keycode 172 = +keycode 215 = diff --git a/mobile/arm-common/Xorg.sh b/mobile/arm-common/Xorg.sh new file mode 100755 index 0000000..79a0def --- /dev/null +++ b/mobile/arm-common/Xorg.sh @@ -0,0 +1,2 @@ +export HOME=/root +export DISPLAY=:0 diff --git a/mobile/arm-common/Xresources b/mobile/arm-common/Xresources new file mode 100644 index 0000000..032fd26 --- /dev/null +++ b/mobile/arm-common/Xresources @@ -0,0 +1 @@ +Xft.dpi: 72 diff --git a/mobile/arm-common/screenshot b/mobile/arm-common/screenshot new file mode 100755 index 0000000..7188e97 --- /dev/null +++ b/mobile/arm-common/screenshot @@ -0,0 +1,22 @@ +#!/bin/sh + +export DISPLAY=:0.0 + +WIDTH=`xrandr | head -1 | awk '{printf $8}' | sed -e 's/[^0-9]//g'` +HEIGHT=`xrandr | head -1 | awk '{printf $10}' | sed -e 's/[^0-9]//g'` +DIR="/opt/usr/media/Screenshots" +TIMESTAMP=`date +%Y%m%d%H%M%S` +FILE=$DIR"/Screen-$TIMESTAMP.bmp" + +if [ ! -d $DIR ]; then + mkdir -p $DIR +fi + +if [ -f /usr/bin/screenshot-arm ]; then + /usr/bin/screenshot-arm -w $WIDTH -h $HEIGHT -f $FILE 2> /dev/null + mediadb-update -r $DIR 1> /dev/null + echo "\"$FILE\" saved" + echo "screenshot success" +else + echo "no file: screenshot-arm" +fi diff --git a/mobile/arm-common/screenshot-arm b/mobile/arm-common/screenshot-arm Binary files differnew file mode 100755 index 0000000..a3cb4ca --- /dev/null +++ b/mobile/arm-common/screenshot-arm diff --git a/mobile/arm-common/startx.in b/mobile/arm-common/startx.in new file mode 100755 index 0000000..de26f38 --- /dev/null +++ b/mobile/arm-common/startx.in @@ -0,0 +1,53 @@ +#!/bin/sh + +DISPLAY=":0" +LOGDIR="/var/log" +XORG_CONF=" -config /etc/X11/xorg.conf -configdir /etc/X11/xorg.conf.d " +OTHER_OPTIONS=" -logfile ${LOGDIR}/Xorg.0.log -ac -noreset +accessx 0 +dpmsphone " + +#run script to enable gl +if [ -e /usr/bin/opengl-es-setup-mali-env.sh ]; then + /usr/bin/opengl-es-setup-mali-env.sh +fi + +#backup previous Xorg.0.log file +if [ -e ${LOGDIR}/Xorg.0.log ]; then + mv ${LOGDIR}/Xorg.0.log ${LOGDIR}/prev.Xorg.0.log +fi + +#backup previous Xorg.0.log.old file +if [ -e ${LOGDIR}/Xorg.0.log.old ]; then + mv ${LOGDIR}/Xorg.0.log.old ${LOGDIR}/prev.Xorg.0.log.old +fi + +if [ -e ~/.xinitrc ]; then + XINITRC=~/.xinitrc +else + XINITRC=/etc/X11/xinitrc +fi + +XSERVER_OPTIONS=" ${DISPLAY} ${OTHER_OPTIONS} ${XORG_CONF} " + +if [ "$1" = "--gdb" ]; then + if [ -x /usr/bin/pvrsrvinit ]; then + pvrsrvinit start + fi + gdb --args Xorg ${XSERVER_OPTIONS} +else + if [ "$1" = "--only" ]; then + if [ -x /usr/bin/pvrsrvinit ]; then + pvrsrvinit start + fi + + Xorg ${XSERVER_OPTIONS} & + else + export WMRC=/etc/X11/wmrc + export WMUSERID=`id -u app` + export WMGROUPID=`id -g app` + export WMUSER=app + export WMUSERHOME=/opt/home/app + + xinit ${XINITRC} -- @PREFIX@/bin/Xorg ${XSERVER_OPTIONS} & + fi +fi + diff --git a/mobile/arm-common/winsys_log_dump.sh b/mobile/arm-common/winsys_log_dump.sh new file mode 100755 index 0000000..6d57632 --- /dev/null +++ b/mobile/arm-common/winsys_log_dump.sh @@ -0,0 +1,28 @@ +#!/bin/sh + +#-------------------------------------- +# winsys +#-------------------------------------- +export DISPLAY=:0.0 +WINSYS_DEBUG=$1/winsys +E17_HOME=/home/app +/bin/mkdir -p ${WINSYS_DEBUG} +/usr/bin/xinfo -p 2> ${WINSYS_DEBUG}/ping.log +/usr/bin/xinfo -xwd_topvwins ${WINSYS_DEBUG} +/bin/cp -af /opt/var/log/keygrab_status.txt ${WINSYS_DEBUG} +/usr/bin/xinfo -topvwins 2> ${WINSYS_DEBUG}/xinfo_topvwins.txt +/usr/bin/xdbg clist > ${WINSYS_DEBUG}/xdbg_clist.log 2>&1 +/usr/bin/xdbg drmevent_pending > ${WINSYS_DEBUG}/drmevent_pending.log 2>&1 +/usr/bin/xberc drmmode_dump > ${WINSYS_DEBUG}/drmmode_dump.log +/usr/bin/find /var/log/ -name "*Xorg*" -exec /bin/cp {} ${WINSYS_DEBUG}/ \; +/usr/bin/xprop -root -f _E_LOG 8s -set _E_LOG ${E17_HOME}/e.log +/bin/cat ${E17_HOME}/e.log > ${WINSYS_DEBUG}/e.log +/usr/bin/border_win_info -p ALL -f ${E17_HOME}/e_illume2.log +/bin/cat ${E17_HOME}/e_illume2.log > ${WINSYS_DEBUG}/e_illume2.log +/usr/bin/e_comp_util -l DUMP_INFO -f ${E17_HOME}/e_comp.log +/bin/cat ${E17_HOME}/e_comp.log > ${WINSYS_DEBUG}/e_comp.log +/bin/cat ${E17_HOME}/e_comp.log_move > ${WINSYS_DEBUG}/e_comp.log_move +/bin/rm ${E17_HOME}/e.log +/bin/rm ${E17_HOME}/e_comp.log +/bin/rm ${E17_HOME}/e_comp.log_move +/bin/rm ${E17_HOME}/e_illume2.log diff --git a/mobile/arm-common/xinitrc b/mobile/arm-common/xinitrc new file mode 100755 index 0000000..f2060e1 --- /dev/null +++ b/mobile/arm-common/xinitrc @@ -0,0 +1,13 @@ +#!/bin/sh + +/usr/bin/scim -d & + +# set dpi +if [ -x /usr/bin/xrdb ]; then + if [ -e ~/.Xresources ]; then + /usr/bin/xrdb -load -nocpp ~/.Xresources + else + /usr/bin/xrdb -load -nocpp /etc/X11/Xresources + fi +fi + diff --git a/mobile/arm-common/xorg.conf b/mobile/arm-common/xorg.conf new file mode 100755 index 0000000..53d0b72 --- /dev/null +++ b/mobile/arm-common/xorg.conf @@ -0,0 +1,6 @@ +Section "ServerFlags" + Option "blank time" "0" + Option "standby time" "0" + Option "suspend time" "0" + Option "off time" "0" +EndSection diff --git a/mobile/arm-common/xresources b/mobile/arm-common/xresources new file mode 100755 index 0000000..0693afe --- /dev/null +++ b/mobile/arm-common/xresources @@ -0,0 +1,31 @@ +#!/bin/sh + +set -e + +case "$1" in + start|stop|restart|reload|force-reload) + # Setting dpi to 72 + if [ -x /usr/bin/xrdb ]; then + if [ -e ~/.Xresources ]; then + /usr/bin/xrdb -load -nocpp ~/.Xresources + else + /usr/bin/xrdb -load -nocpp /etc/X11/Xresources + fi + mkdir -p /tmp/hibernation + touch /tmp/hibernation/xresources_ready + fi + ;; + + status) + if [ -x /usr/bin/xrdb ]; then + /usr/bin/xrdb -query -nocpp + fi + ;; + + *) + echo "Usage: /etc/init.d/xresource {start|stop|status|restart|reload|force-reload}" + exit 1 + ;; +esac + +exit 0 diff --git a/mobile/arm-common/xserver b/mobile/arm-common/xserver new file mode 100755 index 0000000..40f2667 --- /dev/null +++ b/mobile/arm-common/xserver @@ -0,0 +1,53 @@ +#!/bin/sh + +set -e + +export DISPLAY=:0 +export PATH=/bin:/usr/bin/:/sbin:/usr/sbin + +case "$1" in + start) + is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true + if [ "${is_running}" = "" ]; then + echo "Starting Xorg server..." + /usr/bin/startx + else + echo "Xorg server is running already..." + fi + ;; + + restart|reload|force-reload) + is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true + if [ "${is_running}" != "" ]; then + $0 stop || true + sleep 3 + fi + $0 start || true + ;; + + stop) + is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true + if [ "${is_running}" != "" ]; then + echo "Stopping Xorg server..." + killall -9 Xorg + else + echo "Xorg server is not running..." + fi + ;; + + status) + is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true + if [ "${is_running}" = "" ]; then + echo "Xorg server is not running..." + else + echo "Xorg server is running..." + fi + ;; + + *) + echo "Usage: /etc/init.d/xserver {start|stop|status|restart|reload|force-reload}" + exit 1 + ;; +esac + +exit 0 diff --git a/mobile/arm-common/xsetrc b/mobile/arm-common/xsetrc new file mode 100755 index 0000000..e614117 --- /dev/null +++ b/mobile/arm-common/xsetrc @@ -0,0 +1 @@ +xset -r 123 -r 122 -r 231 -r 177 -r 147 -r 166 -r 225 -r 124 -r 179 -r 220 -r 208 -r 209 -r 174 -r 171 -r 173 -r 176 -r 216 -r 234 & diff --git a/mobile/arm-e4412/xorg.conf.d/display.conf b/mobile/arm-e4412/xorg.conf.d/display.conf new file mode 100755 index 0000000..5467a6c --- /dev/null +++ b/mobile/arm-e4412/xorg.conf.d/display.conf @@ -0,0 +1,30 @@ +Section "ServerLayout" + Identifier "Test Layout" + Screen 0 "Screen0" 0 0 + InputDevice "Gesture" +EndSection + +Section "Screen" + Identifier "Screen0" + Device "exynos" + Monitor "Monitor0" +# SubSection "Display" +# Modes "320x480" +# EndSubSection +EndSection + +Section "Monitor" + Identifier "Monitor0" + Option "DPMS" "true" +# DisplaySize 46 76 +EndSection + +Section "Device" + Identifier "exynos" + Driver "exynos" + Option "exa" "true" + Option "dri2" "true" + Option "sw_exa" "true" + Option "tfb" "true" + Option "cachable" "false" +EndSection diff --git a/mobile/arm-e4412/xorg.conf.d/input.conf b/mobile/arm-e4412/xorg.conf.d/input.conf new file mode 100755 index 0000000..dfbbbc6 --- /dev/null +++ b/mobile/arm-e4412/xorg.conf.d/input.conf @@ -0,0 +1,33 @@ +Section "ServerFlags" + Option "AllowEmptyInput" "true" + Option "AutoAddDevices" "true" + Option "AutoEnableDevices" "true" +EndSection + +Section "InputClass" + Identifier "evdev touchscreen catchall" + MatchIsTouchScreen "on" + MatchDevicePath "/dev/input/event*" + Driver "evdevmultitouch" + Option "MultiTouch" "10" +EndSection + +Section "InputClass" + Identifier "evdev pointer catchall" + MatchIsPointer "on" + MatchDevicePath "/dev/input/event*" + Driver "evdev" +EndSection + +Section "InputClass" + Identifier "evdev keyboard catchall" + MatchIsKeyboard "on" + MatchDevicePath "/dev/input/event*" + Driver "evdev" +EndSection + +Section "InputDevice" + Identifier "Gesture" + Driver "gesture" + Option "Device" "/dev/null" +EndSection diff --git a/mobile/arm-e4412/xorg.conf.d/module.conf b/mobile/arm-e4412/xorg.conf.d/module.conf new file mode 100644 index 0000000..6450989 --- /dev/null +++ b/mobile/arm-e4412/xorg.conf.d/module.conf @@ -0,0 +1,6 @@ +Section "Module" + SubSection "xdbg" + Option "dlog" "true" + Option "log_path" "/var/log/Xorg.0.log2" + EndSubSection +EndSection diff --git a/mobile/autogen.sh b/mobile/autogen.sh new file mode 100755 index 0000000..218197d --- /dev/null +++ b/mobile/autogen.sh @@ -0,0 +1,12 @@ +#! /bin/sh + +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +ORIGDIR=`pwd` +cd $srcdir + +autoreconf -v --install || exit 1 +cd $ORIGDIR || exit $? + +#$srcdir/configure --enable-maintainer-mode "$@" diff --git a/mobile/configure.ac b/mobile/configure.ac new file mode 100644 index 0000000..945ceb9 --- /dev/null +++ b/mobile/configure.ac @@ -0,0 +1,56 @@ +# Copyright (c) 2011 Samsung Electronics Co., Ltd All Rights Reserved +# +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of Red Hat not be used in +# advertising or publicity pertaining to distribution of the software without +# specific, written prior permission. Red Hat makes no +# representations about the suitability of this software for any purpose. It +# is provided "as is" without express or implied warranty. +# +# RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +# EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR +# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, +# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER +# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +# PERFORMANCE OF THIS SOFTWARE. +# + +# -*- Autoconf -*- +# Process this file with autoconf to produce a configure script. + +AC_PREREQ(2.61) +AC_INIT(FULL-PACKAGE-NAME, VERSION, BUG-REPORT-ADDRESS) + +# Checks for programs. +AC_PROG_INSTALL +AC_PROG_MAKE_SET + +AC_CONFIG_SRCDIR([Makefile.am]) +AM_CONFIG_HEADER([config.h]) +AC_CONFIG_AUX_DIR(.) + +AM_INIT_AUTOMAKE([dist-bzip2]) + +AM_MAINTAINER_MODE + +# Checks for programs. +AC_DISABLE_STATIC +AC_PROG_LIBTOOL +AC_PROG_CC + +AC_ARG_WITH(arch, AS_HELP_STRING([--with-arch=ARCH], [Architecture (default: arm)]), + [ ARCH="$withval" ], + [ ARCH="arm" ]) +AC_ARG_WITH(conf-prefix, AS_HELP_STRING([--with-conf-prefix=CONF_PREFIX], [Architecture (default: /opt/etc)]), + [ CONF_PREFIX="$withval" ], + [ CONF_PREFIX="/opt/etc" ]) + +AC_SUBST(ARCH) +AC_SUBST(CONF_PREFIX) + +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/mobile/xorg-x11-misc-exynos.manifest b/mobile/xorg-x11-misc-exynos.manifest new file mode 100644 index 0000000..2c4e9f3 --- /dev/null +++ b/mobile/xorg-x11-misc-exynos.manifest @@ -0,0 +1,8 @@ +<manifest> + <request> + <domain name="xorg"/> + </request> + <assign> + <filesystem path="/opt/etc/dump.d/module.d/winsys_log_dump.sh" label="_" exec_label="none" /> + </assign> +</manifest> |