# $Id: macros.in,v 1.47 2000/03/09 18:13:03 jbj Exp $ #============================================================================== # Macro naming conventions (preliminary): # # Macros that begin with an underscore are "local" in the sense that # they (if used) will not be exported in rpm headers. Some macros # that don't start with an underscore (but look like they should) # are compatible with macros generated by rpm-2.5.x and will be made # more consistent in a future release. # #============================================================================== # ---- A macro that expands to nothing. # %nil %{!?nil} #============================================================================== # ---- filesystem macros. # %_usr @prefix@ %_usrsrc %{_usr}/src %_var @varprefix@ #============================================================================== # ---- Generally useful path macros. # %__awk @AWK@ %__bzip2 %{_bzip2bin} %__cat @__CAT@ %__chgrp @__CHGRP@ %__chmod @__CHMOD@ %__chown @__CHOWN@ %__cp @__CP@ %__cpio @__CPIO@ %__grep @__GREP@ %__gzip %{_gzipbin} %__id @__ID@ %__install @__INSTALL@ %__ln_s @LN_S@ %__make @__MAKE@ %__mkdir @__MKDIR@ %__mkdir_p @MKDIR_P@ %__mv @__MV@ %__patch @__PATCH@ %__perl @__PERL@ %__pgp %{_pgpbin} %__rm @__RM@ %__rsh @__RSH@ %__sed @__SED@ %__ssh @__SSH@ %__tar @__TAR@ #============================================================================== # ---- Build system path macros. # %__ar @AR@ %__cc @CC@ %__cpp @CPP@ %__ld @__LD@ %__nm @__NM@ %__objcopy @__OBJCOPY@ %__objdump @__OBJDUMP@ %__ranlib @RANLIB@ %__remsh %{__rsh} %__strip @__STRIP@ # XXX avoid failures if tools are not installed when rpm is built. %__libtoolize libtoolize %__aclocal aclocal %__autoheader autoheader %__automake automake %__autoconf autoconf #============================================================================== # ---- Required rpmrc macros. # Macros that used to be initialized as a side effect of rpmrc parsing. # These are the default values that can be overridden by other # (e.g. per-platform, per-system, per-packager, per-package) macros. # %_builddir %{_topdir}/BUILD %_buildshell /bin/sh %_bzip2bin @BZIP2BIN@ %_dbpath %{_var}/lib/rpm %_rebuilddbpath %{_dbpath} %_defaultdocdir %{_usr}/doc # %__find_provides @FINDPROVIDES@ %__find_requires @FINDREQUIRES@ #%__find_prereq ??? #%__find_conflicts ??? #%__find_obsoletes ??? # # XXX fixowner, fixgroup, and fixperms are run at the end of hardcoded setup %__id_u @__ID_U@ %__chown_Rhf @__CHOWN_RHF@ %__chgrp_Rhf @__CHGRP_RHF@ %_fixowner [ `%{__id_u}` = '0' ] && %{__chown_Rhf} root %_fixgroup [ `%{__id_u}` = '0' ] && %{__chgrp_Rhf} @ROOT_GROUP@ %_fixperms %{__chmod} -Rf @FIXPERMS@ # %_gzipbin @GZIPBIN@ %_instchangelog 5 %_pgpbin @PGPBIN@ %_rpmdir %{_topdir}/RPMS # # XXX Note escaped %% for use in headerSprintf %_rpmfilename %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm %_signature none %_sourcedir %{_topdir}/SOURCES %_specdir %{_topdir}/SPECS %_srcrpmdir %{_topdir}/SRPMS %_tmppath %{_var}/tmp %_topdir %{_usrsrc}/redhat #============================================================================== # ---- Optional rpmrc macros. # Macros that are initialized as a side effect of rpmrc and/or spec # file parsing. # # Configurable build root path, same as BuildRoot: in a specfile. # (Note: the configured macro value will override the spec file value). # #%buildroot # The sub-directory (relative to %{_builddir}) where sources are compiled. # This macro is set after processing %setup, either explicitly from the # value given to -n or the default name-version. # #%buildsubdir # Configurable distribution information, same as Distribution: in a # specfile. # #%distribution # Boolean (i.e. 1 == "yes", 0 == "no") that controls whether files # marked as %doc should be installed. #%_excludedocs # The port and machine name of a FTP proxy host running TIS firewall. # #%_ftpport #%_ftpproxy # The signature to use and the location of configuration files for # signing packages with GNU gpg. # #%_gpg_name #%_gpg_path # The port and machine name of an HTTP proxy host. # #%_httpport #%_httpproxy # The PATH put into the environment before running %pre/%post et al. # %_install_script_path /sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin # A colon separated list of desired locales to be installed; # "all" means install all locale specific files. # %_install_langs all # # Deprecated. #%_langpatt # A colon separated list of paths where files should *not* be installed. # Usually, these are network file system mount points. # #%_netsharedpath # Configurable packager information, same as Packager: in a specfile. # #%packager # Compression type and level for package payloads. # "w9.gzdio" gzip level 9 (default). # "w9.bzdio" bzip2 level 9 (experimental, at your own risk). # #%_payload_compression w9.gzdio # The signature to use and the location of configuration files for # signing packages with PGP. # #%_pgp_name #%_pgp_path # Configurable virtual provides (unimplemented, use Provides: ... # in an rpmrc file). # #%_provides # Deprecated. # #%_timecheck # Configurable vendor information, same as Vendor: in a specfile. # #%vendor #============================================================================== # ---- per-platform macros. # Macros that are specific to an individual platform. The values here # will be used if the per-platform macro file does not exist.. # %_arch @RPMCANONARCH@ %_vendor @RPMCANONVENDOR@ %_os @RPMCANONOS@ %_target_platform %{_target_cpu}-%{_vendor}-%{_target_os} # # XXX use the rpmrc instantiated macro for now #%optflags -O2 #============================================================================== # ---- Scriptlet template templates. # Global defaults used for building scriptlet templates. # # XXX legacy configuration, this will be eliminated after rpm-3.0.4. %_preScriptEnvironment \ RPM_SOURCE_DIR=\"%{_sourcedir}\"\ RPM_BUILD_DIR=\"%{_builddir}\"\ RPM_OPT_FLAGS=\"%{optflags}\"\ RPM_ARCH=\"%{_arch}\"\ RPM_OS=\"%{_os}\"\ export RPM_SOURCE_DIR RPM_BUILD_DIR RPM_OPT_FLAGS RPM_ARCH RPM_OS\ RPM_DOC_DIR=\"%{_docdir}\"\ export RPM_DOC_DIR\ RPM_PACKAGE_NAME=\"%{name}\"\ RPM_PACKAGE_VERSION=\"%{version}\"\ RPM_PACKAGE_RELEASE=\"%{release}\"\ export RPM_PACKAGE_NAME RPM_PACKAGE_VERSION RPM_PACKAGE_RELEASE\ %{?buildroot:RPM_BUILD_ROOT=\"%{buildroot}\"\ export RPM_BUILD_ROOT} %___build_shell %{?_buildshell:%{_buildshell}}%{!?_buildshell:/bin/sh} %___build_args -e %___build_cmd %{?_sudo:%{_sudo} }%{?_remsh:%{_remsh} %{_remhost} }%{?_remsudo:%{_remsudo} }%{?_remchroot:%{_remchroot} %{_remroot} }%{___build_shell} %{___build_args} %___build_pre \ RPM_SOURCE_DIR=\"%{u2p:%{_sourcedir}}\"\ RPM_BUILD_DIR=\"%{u2p:%{_builddir}}\"\ RPM_OPT_FLAGS=\"%{optflags}\"\ RPM_ARCH=\"%{_arch}\"\ RPM_OS=\"%{_os}\"\ export RPM_SOURCE_DIR RPM_BUILD_DIR RPM_OPT_FLAGS RPM_ARCH RPM_OS\ RPM_DOC_DIR=\"%{_docdir}\"\ export RPM_DOC_DIR\ RPM_PACKAGE_NAME=\"%{name}\"\ RPM_PACKAGE_VERSION=\"%{version}\"\ RPM_PACKAGE_RELEASE=\"%{release}\"\ export RPM_PACKAGE_NAME RPM_PACKAGE_VERSION RPM_PACKAGE_RELEASE\ %{?buildroot:RPM_BUILD_ROOT=\"%{u2p:%{buildroot}}\"\ export RPM_BUILD_ROOT}\ \ %{verbose:set -x}%{!verbose:exec > /dev/null}\ umask 022\ cd %{u2p:%{_builddir}}\ #%___build_body %{nil} %___build_post exit 0 %___build_template #!%{___build_shell}\ %{___build_pre}\ %{nil} #%{___build_body}\ #%{___build_post}\ #%{nil} #============================================================================== # ---- Scriptlet templates. # Macro(s) that expand to a command and script that is executed. # CAVEAT: All macro expansions must fit in a BUFSIZ (8192 byte) buffer. # %__spec_prep_shell %{___build_shell} %__spec_prep_args %{___build_args} %__spec_prep_cmd %{___build_cmd} %__spec_prep_pre %{___build_pre} %__spec_prep_body %{___build_body} %__spec_prep_post %{___build_post} %__spec_prep_template #!%{__spec_prep_shell}\ %{__spec_prep_pre}\ %{nil} #%{__spec_prep_body}\ #%{__spec_prep_post}\ #%{nil} %__spec_build_shell %{___build_shell} %__spec_build_args %{___build_args} %__spec_build_cmd %{___build_cmd} %__spec_build_pre %{___build_pre} %__spec_build_body %{___build_body} %__spec_build_post %{___build_post} %__spec_build_template #!%{__spec_build_shell}\ %{__spec_build_pre}\ %{nil} #%{__spec_build_body}\ #%{__spec_build_post}\ #%{nil} %__spec_install_shell %{___build_shell} %__spec_install_args %{___build_args} %__spec_install_cmd %{___build_cmd} %__spec_install_pre %{___build_pre} %__spec_install_body %{___build_body} %__spec_install_post %{___build_post} %__spec_install_template #!%{__spec_install_shell}\ %{__spec_install_pre}\ %{nil} #%{__spec_install_body}\ #%{__spec_install_post}\ #%{nil} #%__spec_autodep_shell %{___build_shell} #%__spec_autodep_args %{___build_args} #%__spec_autodep_cmd %{___build_cmd} #%__spec_autodep_pre %{___build_pre} #%__spec_autodep_body %{___build_body} #%__spec_autodep_post %{___build_post} #%__spec_autodep_template #!%{__spec_autodep_shell}\ #%{__spec_autodep_pre}\ #%{nil} #%{__spec_autodep_body}\ #%{__spec_autodep_post}\ #%{nil} %__spec_clean_shell %{___build_shell} %__spec_clean_args %{___build_args} %__spec_clean_cmd %{___build_cmd} %__spec_clean_pre %{___build_pre} %__spec_clean_body %{___build_body} %__spec_clean_post %{___build_post} %__spec_clean_template #!%{__spec_clean_shell}\ %{__spec_clean_pre}\ %{nil} #%{__spec_clean_body}\ #%{__spec_clean_post}\ #%{nil} %__spec_rmbuild_shell %{___build_shell} %__spec_rmbuild_args %{___build_args} %__spec_rmbuild_cmd %{___build_cmd} %__spec_rmbuild_pre %{___build_pre} %__spec_rmbuild_body %{___build_body} %__spec_rmbuild_post %{___build_post} %__spec_rmbuild_template #!%{__spec_rmbuild_shell}\ %{__spec_rmbuild_pre}\ %{nil} #%{__spec_rmbuild_body}\ #%{__spec_rmbuild_post}\ #%{nil} # XXX We don't expand pre/post install scriptlets (yet). #%__spec_pre_pre %{nil} #%__spec_pre_post %{nil} #%__spec_post_pre %{nil} #%__spec_post_post %{nil} #%__spec_preun_pre %{nil} #%__spec_preun_post %{nil} #%__spec_postun_pre %{nil} #%__spec_postun_post %{nil} #%__spec_triggerpostun_pre %{nil} #%__spec_triggerpostun_post %{nil} #%__spec_triggerun_pre %{nil} #%__spec_triggerun_post %{nil} #%__spec_triggerin_pre %{nil} #%__spec_triggerin_post %{nil} #============================================================================== # ---- configure macros. # Macro(s) slavishly copied from autoconf's config.status. # %_prefix @prefix@ %_exec_prefix %{_prefix} %_bindir %{_exec_prefix}/bin %_sbindir %{_exec_prefix}/sbin %_libexecdir %{_exec_prefix}/libexec %_datadir %{_prefix}/share %_sysconfdir %{_prefix}/etc %_sharedstatedir %{_prefix}/com %_localstatedir %{_prefix}/var %_libdir %{_exec_prefix}/lib %_includedir %{_prefix}/include %_oldincludedir /usr/include %_infodir %{_prefix}/info %_mandir %{_prefix}/man #============================================================================== # ---- config.guess platform macros. # Macro(s) similar to the tokens used by configure. # %_build %{_host} %_build_alias %{_host_alias} %_build_cpu %{_host_cpu} %_build_vendor %{_host_vendor} %_build_os %{_host_os} %_host @host@ %_host_alias @host_alias@ %_host_cpu @host_cpu@ %_host_vendor @host_vendor@ %_host_os @host_os@ %_target %{_host} %_target_alias %{_host_alias} %_target_cpu %{_host_cpu} %_target_vendor %{_host_vendor} %_target_os %{_host_os} #============================================================================== # ---- specfile macros. # Macro(s) here can be used reliably for reproducible builds. # (Note: Above is the goal, below are the macros under development) # # The configure macro does the following: # optionally change to a subdirectory (not implemented). # attempt to update config.guess and config.sub. # run configure with correct prefix, platform, and CFLAGS. # optionally restore current directory (not implemented). # The configure macro should be invoked as %configure (rather than %{configure}) # because the rest of the arguments will be expanded using %*. Another # gotcha is that arguments, if present, should be on the same line as the # %configure. # %configure \ %{?__libtoolize:[ -f configure.in ] && %{__libtoolize} --copy --force} \ CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} #------------------------------------------------------------------------------ # This is an improved version of %configure that may replace the above # macro at some point (from PLD team). # #%configure { CFLAGS="${CFLAGS:-%optflags}" ; export CFLAGS ; \ # CXXFLAGS="${CXXFLAGS:-%optflags}" ; export CXXFLAGS ; \ # FFLAGS="${FFLAGS:-%optflags}" ; export FFLAGS ; \ # ./configure %{_target_platform} \ # --prefix=%{_prefix} \ # --exec-prefix=%{_exec_prefix} \ # --bindir=%{_bindir} \ # --sbindir=%{_sbindir} \ # --sysconfdir=%{_sysconfdir} \ # --datadir=%{_datadir} \ # --includedir=%{_includedir} \ # --libdir=%{_libdir} \ # --libexecdir=%{_libexecdir} \ # --localstatedir=%{_localstatedir} \ # --sharedstatedir=%{_sharedstatedir} \ # --mandir=%{_mandir} \ # --infodir=%{_infodir} } #------------------------------------------------------------------------------ # The GNUconfigure macro does the following: # update config.guess and config.sub. # regenerate all autoconf/automake files # optionally change to a directory (make the directory if requested). # run configure with correct prefix, platform, and CFLAGS. # optionally restore current directory. # # Based on autogen.sh from GNOME and orginal GNUconfigure # %GNUconfigure(MCs:) \ CFLAGS="${CFLAGS:-%optflags}" ; export CFLAGS; \ LDFLAGS="${LDFLAGS:-'%{-s:-s}'}" ; export LDFLAGS; \ %{-C:_mydir="`pwd`"; %{-M: %{__mkdir} -p %{-C*};} cd %{-C*}} \ dirs="`find ${_mydir} -name configure.in -print`"; export dirs; \ for coin in `echo ${dirs}` \ do \ dr=`dirname ${coin}`; \ if test -f ${dr}/NO-AUTO-GEN; then \ : \ else \ macrodirs=`sed -n -e 's,AM_ACLOCAL_INCLUDE(\(.*\)),\1,gp' < ${coin}`; \ ( cd ${dr}; \ aclocalinclude="${ACLOCAL_FLAGS}"; \ for k in ${macrodirs}; do \ if test -d ${k}; then \ aclocalinclude="${aclocalinclude} -I ${k}"; \ ##else \ ## echo "**Warning**: No such directory \`${k}'. Ignored." \ fi \ done \ if grep "^AM_GNU_GETTEXT" configure.in >/dev/null; then \ if grep "sed.*POTFILES" configure.in >/dev/null; then \ : do nothing -- we still have an old unmodified configure.in \ else \ test -r ${dr}/aclocal.m4 || touch ${dr}/aclocal.m4; \ echo "no" | gettextize --force --copy; \ test -r ${dr}/aclocal.m4 && %{__chmod} u+w ${dr}/aclocal.m4; \ fi \ fi \ if grep "^AM_PROG_LIBTOOL" configure.in >/dev/null; then \ %{__libtoolize} --force --copy; \ fi \ aclocal ${aclocalinclude}; \ if grep "^AM_CONFIG_HEADER" configure.in >/dev/null; then \ %{__autoheader}; \ fi \ echo "Running automake --gnu ${am_opt} ..."; \ %{__automake} --add-missing --gnu ${am_opt}; \ %{__autoconf}; \ ); \ fi \ done \ %{-C:${_mydir}}%{!-C:.}/configure %{_target_platform} --prefix=%{_prefix} --exec-prefix=%{_exec_prefix} --bindir=%{_bindir} --sbindir=%{_sbindir} --sysconfdir=%{_sysconfdir} --datadir=%{_datadir} --includedir=%{_includedir} --libdir=%{_libdir} --libexecdir=%{_libexecdir} --localstatedir=%{_localstatedir} --sharedstatedir=%{_sharedstatedir} --mandir=%{_mandir} --infodir=%{_infodir} %* ; \ %{-C:cd ${_mydir}; unset _mydir} #------------------------------------------------------------------------------ # Useful perl macros (from Artur Frysiak ) # # For example, these can be used as (from ImageMagick.spec from PLD site) # [...] # BuildPrereq: perl # [...] # %package perl # Summary: libraries and modules for access to ImageMagick from perl # Group: Development/Languages/Perl # Requires: %{name} = %{version} # %requires_eq perl # [...] # %install # rm -fr $RPM_BUILD_ROOT # install -d $RPM_BUILD_ROOT/%{perl_sitearch} # [...] # %files perl # %defattr(644,root,root,755) # %{perl_sitearch}/Image # %dir %{perl_sitearch}/auto/Image # %requires_eq() %(LC_ALL="C" rpm -q --queryformat 'Requires:%%{NAME} = %%{VERSION}' %1| grep -v "is not") %perl_sitearch %(eval "`perl -V:installsitearch`"; echo $installsitearch) %perl_archlib %(eval "`perl -V:installarchlib`"; echo $installarchlib) #------------------------------------------------------------------------------ # arch macro for all Intel i?86 compatibile processors # (Note: This macro (and it's analogues) will probably be obsoleted when # rpm can use regular expressions against target platforms in macro # conditionals. This change will be introduced after rpm-3.0.4). # %ix86 i386 i486 i586 i686 i786 i886 i986 #------------------------------------------------------------------------ # Use in %install to generate locale specific file lists. For example, # # %install # ... # %find_lang %{name} # ... # %files -f %{name}.lang # %find_lang @RPMCONFIGDIR@/find-lang.sh %{buildroot}