# Traditional Chinese translation for rpm. # Copyright (C) 2006, 07 Free Software Foundation, Inc. # This file is distributed under the same license as the rpm package. # Lie_Ex , 2006. # Wei-Lun Chao , 2006, 07. # msgid "" msgstr "" "Project-Id-Version: rpm 4.4.2\n" "Report-Msgid-Bugs-To: rpm-maint@lists.rpm.org\n" "POT-Creation-Date: 2011-07-15 12:37+0300\n" "PO-Revision-Date: 2007-05-05 10:52+0800\n" "Last-Translator: Wei-Lun Chao \n" "Language-Team: Chinese (traditional) \n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #: cliutils.c:20 lib/poptI.c:29 #, c-format msgid "%s: %s\n" msgstr "%s：%s\n" #: cliutils.c:26 lib/poptALL.c:59 #, c-format msgid "RPM version %s\n" msgstr "RPM 版本 %s\n" #: cliutils.c:31 #, c-format msgid "Copyright (C) 1998-2002 - Red Hat, Inc.\n" msgstr "" #: cliutils.c:32 #, c-format msgid "" "This program may be freely redistributed under the terms of the GNU GPL\n" msgstr "此程式允許在遵守 GNU GPL 協定的前提下自由散布\n" #: cliutils.c:52 #, fuzzy, c-format msgid "creating a pipe for --pipe failed: %m\n" msgstr "建立保存失敗：%s\n" #: cliutils.c:62 #, c-format msgid "exec failed\n" msgstr "執行失敗\n" #: rpm2cpio.c:62 #, c-format msgid "argument is not an RPM package\n" msgstr "引數不是一個 RPM 套件\n" #: rpm2cpio.c:67 #, c-format msgid "error reading header from package\n" msgstr "讀取套件的表頭資訊時發生錯誤\n" #: rpm2cpio.c:81 #, c-format msgid "cannot re-open payload: %s\n" msgstr "無法重新開啟酬載：%s\n" #: rpmqv.c:41 #, fuzzy msgid "Query/Verify package selection options:" msgstr "查詢/校驗套件所屬的組別" #: rpmqv.c:46 msgid "Query options (with -q or --query):" msgstr "查詢選項 (使用 -q 或 --query)：" #: rpmqv.c:51 msgid "Verify options (with -V or --verify):" msgstr "校驗選項 (使用 -V 或 --verify)：" #: rpmqv.c:57 msgid "Install/Upgrade/Erase options:" msgstr "安裝/更新/清除選項：" #: rpmqv.c:64 rpmbuild.c:217 rpmdb.c:35 rpmkeys.c:39 rpmsign.c:37 rpmspec.c:48 #: tools/rpmdeps.c:32 tools/rpmgraph.c:222 msgid "Common options for all rpm modes and executables:" msgstr "用於所有 rpm 模式和可執行檔案的共同選項：" #: rpmqv.c:121 msgid "one type of query/verify may be performed at a time" msgstr "只有查詢/校驗兩種工作模式能被同時選用" #: rpmqv.c:125 msgid "unexpected query flags" msgstr "不可預料的查詢旗標" #: rpmqv.c:128 msgid "unexpected query format" msgstr "不可預料的查詢格式" #: rpmqv.c:131 msgid "unexpected query source" msgstr "不可預料的查詢來源" #: rpmqv.c:142 rpmdb.c:70 rpmkeys.c:77 rpmsign.c:159 msgid "only one major mode may be specified" msgstr "只能指定一個主要工作模式" #: rpmqv.c:153 #, fuzzy msgid "only installation and upgrading may be forced" msgstr "只有安裝、更新、移除原始碼檔案、移除規格檔案幾種作業可被強制執行" #: rpmqv.c:155 msgid "files may only be relocated during package installation" msgstr "在套件安裝時檔案可以被重新部署" #: rpmqv.c:158 msgid "cannot use --prefix with --relocate or --excludepath" msgstr "--prefix 不能和 --relocate 或 --excludepath 同時使用" #: rpmqv.c:161 msgid "" "--relocate and --excludepath may only be used when installing new packages" msgstr "--relocate 和 --excludepath 只能在安裝新軟體時使用" #: rpmqv.c:164 msgid "--prefix may only be used when installing new packages" msgstr "--prefix 只能在安裝新軟體時使用" #: rpmqv.c:167 msgid "arguments to --prefix must begin with a /" msgstr "--prefix 的引數必須以「/」開頭" #: rpmqv.c:170 msgid "--hash (-h) may only be specified during package installation" msgstr "--hash (-h) 選項只能在套件安裝時指定" #: rpmqv.c:174 msgid "--percent may only be specified during package installation" msgstr "--percent 選項只能在套件安裝時指定" #: rpmqv.c:178 msgid "--replacepkgs may only be specified during package installation" msgstr "--replacepkgs 選項只能在套件安裝時指定" #: rpmqv.c:182 msgid "--excludedocs may only be specified during package installation" msgstr "--excludedocs 選項只能在套件安裝時指定" #: rpmqv.c:186 msgid "--includedocs may only be specified during package installation" msgstr "--includedocs 選項只能在套件安裝時指定" #: rpmqv.c:190 msgid "only one of --excludedocs and --includedocs may be specified" msgstr "--excludedocs 和 --includedocs 兩個選項中只能指定一個" #: rpmqv.c:194 msgid "--ignorearch may only be specified during package installation" msgstr "--ignorearch 選項只能在套件安裝時指定" #: rpmqv.c:198 msgid "--ignoreos may only be specified during package installation" msgstr "--ignoreos 選項只能在套件安裝時指定" #: rpmqv.c:203 msgid "--ignoresize may only be specified during package installation" msgstr "--ignoresize 選項只能在套件安裝時指定" #: rpmqv.c:207 msgid "--allmatches may only be specified during package erasure" msgstr "--allmatches 選項只能在套件清除時指定" #: rpmqv.c:211 msgid "--allfiles may only be specified during package installation" msgstr "--allfiles 選項只能在套件安裝時指定" #: rpmqv.c:216 msgid "--justdb may only be specified during package installation and erasure" msgstr "--justdb 選項只能在套件安裝和清除時指定" #: rpmqv.c:221 msgid "" "script disabling options may only be specified during package installation " "and erasure" msgstr "與命令稿停用有關的選項只能在套件安裝和清除時指定" #: rpmqv.c:226 msgid "" "trigger disabling options may only be specified during package installation " "and erasure" msgstr "與觸發停用有關的選項只能在套件安裝和清除時指定" #: rpmqv.c:230 #, fuzzy msgid "" "--nodeps may only be specified during package installation, erasure, and " "verification" msgstr "--test 選項只能在套件的安裝、清除和組建時指定" #: rpmqv.c:234 #, fuzzy msgid "--test may only be specified during package installation and erasure" msgstr "--justdb 選項只能在套件安裝和清除時指定" #: rpmqv.c:239 rpmbuild.c:547 msgid "arguments to --root (-r) must begin with a /" msgstr "--root (-r) 的引數必須以「/」開頭" #: rpmqv.c:256 msgid "no packages given for erase" msgstr "沒有指定要清除的套件名稱" #: rpmqv.c:290 msgid "no packages given for install" msgstr "沒有指定要安裝的套件名稱" #: rpmqv.c:302 rpmspec.c:79 msgid "no arguments given for query" msgstr "沒有指定查詢引數" #: rpmqv.c:314 msgid "no arguments given for verify" msgstr "沒有指定校驗引數" #: rpmbuild.c:98 #, c-format msgid "buildroot already specified, ignoring %s\n" msgstr "buildroot 已被指定，忽略 %s\n" #: rpmbuild.c:119 #, c-format msgid "build through %prep (unpack sources and apply patches) from " msgstr "從 <規格檔> 透過 %prep (解壓原始碼和套用修補程式) 來組建" #: rpmbuild.c:120 rpmbuild.c:123 rpmbuild.c:126 rpmbuild.c:129 rpmbuild.c:132 #: rpmbuild.c:135 rpmbuild.c:138 msgid "" msgstr "<規格檔>" #: rpmbuild.c:122 msgid "build through %build (%prep, then compile) from " msgstr "從 <規格檔> 透過 %build (%prep，然後編譯) 來組建" #: rpmbuild.c:125 msgid "build through %install (%prep, %build, then install) from " msgstr "從 <規格檔> 透過 %install (%prep，%build，然後安裝) 來組建" #: rpmbuild.c:128 #, c-format msgid "verify %files section from " msgstr "從 <規格檔> 驗證 %files 區段" #: rpmbuild.c:131 msgid "build source and binary packages from " msgstr "根據 <規格檔案> 組建原始碼套件與二進位套件" #: rpmbuild.c:134 msgid "build binary package only from " msgstr "根據 <規格檔案> 只組建二進位套件" #: rpmbuild.c:137 msgid "build source package only from " msgstr "根據 <規格檔案> 只組建原始碼套件" #: rpmbuild.c:141 #, c-format msgid "build through %prep (unpack sources and apply patches) from " msgstr "從 <打包檔> 透過 %prep (解壓原始碼和套用修補程式) 來組建" #: rpmbuild.c:142 rpmbuild.c:145 rpmbuild.c:148 rpmbuild.c:151 rpmbuild.c:154 #: rpmbuild.c:157 rpmbuild.c:160 msgid "" msgstr "" #: rpmbuild.c:144 msgid "build through %build (%prep, then compile) from " msgstr "從 <打包檔> 透過 %build (%prep，然後編譯) 來組建" #: rpmbuild.c:147 msgid "build through %install (%prep, %build, then install) from " msgstr "從 <打包檔> 透過 %install (%prep，%build，然後安裝) 來組建" #: rpmbuild.c:150 #, c-format msgid "verify %files section from " msgstr "從 <打包檔> 驗證 %files 區段" #: rpmbuild.c:153 msgid "build source and binary packages from " msgstr "從 中組建原始碼套件與二進位套件" #: rpmbuild.c:156 msgid "build binary package only from " msgstr "從 中只組建二進位套件" #: rpmbuild.c:159 msgid "build source package only from " msgstr "從 中只組建原始碼套件" #: rpmbuild.c:163 msgid "build binary package from " msgstr "從 <原始碼套件> 中組建二進位套件" #: rpmbuild.c:164 rpmbuild.c:167 msgid "" msgstr "<原始碼套件>" #: rpmbuild.c:166 msgid "" "build through %install (%prep, %build, then install) from " msgstr "從 <原始碼套件> 透過 %install (%prep，%build，然後安裝) 來組建" #: rpmbuild.c:170 msgid "override build root" msgstr "強制覆寫組建根目錄" #: rpmbuild.c:172 msgid "remove build tree when done" msgstr "完成後移除組建目錄樹" #: rpmbuild.c:174 msgid "ignore ExcludeArch: directives from spec file" msgstr "忽略 ExcludeArch：根據規格檔案的指示" #: rpmbuild.c:176 msgid "debug file state machine" msgstr "除錯檔案狀態機器" #: rpmbuild.c:178 msgid "do not execute any stages of the build" msgstr "不執行組建程序裡的任何步驟" #: rpmbuild.c:180 msgid "do not verify build dependencies" msgstr "不校驗組建相依關係" #: rpmbuild.c:182 #, fuzzy msgid "generate package header(s) compatible with (legacy) rpm v3 packaging" msgstr "產生相容於過去的 rpm2/rpm3 打包的表頭" #: rpmbuild.c:186 msgid "do not accept i18N msgstr's from specfile" msgstr "不接受來自規格檔的 i18N msgstr" #: rpmbuild.c:188 msgid "remove sources when done" msgstr "完成後移除原始碼檔案" #: rpmbuild.c:190 msgid "remove specfile when done" msgstr "完成後移除規格檔案" #: rpmbuild.c:192 msgid "skip straight to specified stage (only for c,i)" msgstr "直接跳到指定的階段 (只有用於 c,i)" #: rpmbuild.c:194 rpmspec.c:34 msgid "override target platform" msgstr "無視目標平台" #: rpmbuild.c:211 msgid "Build options with [ | | ]:" msgstr "組建選項中使用 [ <規格檔> | <打包檔> | <原始碼套件> ]：" #: rpmbuild.c:231 msgid "Failed build dependencies:\n" msgstr "相依性組建失敗：\n" #: rpmbuild.c:249 #, c-format msgid "Unable to open spec file %s: %s\n" msgstr "無法開啟規格檔案 %s：%s\n" #: rpmbuild.c:311 #, c-format msgid "Failed to open tar pipe: %m\n" msgstr "無法開啟打包管道：%m\n" #: rpmbuild.c:330 #, c-format msgid "Failed to read spec file from %s\n" msgstr "無法從 %s 讀取規格檔案\n" #: rpmbuild.c:342 #, c-format msgid "Failed to rename %s to %s: %m\n" msgstr "無法將 %s 更名為 %s：%m\n" #: rpmbuild.c:417 #, c-format msgid "failed to stat %s: %m\n" msgstr "無法檢視 %s 的狀態：%m\n" #: rpmbuild.c:421 #, c-format msgid "File %s is not a regular file.\n" msgstr "%s 不是一個正常的檔案。\n" #: rpmbuild.c:428 #, c-format msgid "File %s does not appear to be a specfile.\n" msgstr "%s 似乎不是一個規格檔案。\n" #: rpmbuild.c:494 #, c-format msgid "Building target platforms: %s\n" msgstr "組建目標平台：%s\n" #: rpmbuild.c:502 #, c-format msgid "Building for target %s\n" msgstr "組建目標 %s\n" #: rpmdb.c:22 msgid "initialize database" msgstr "初始化資料庫" #: rpmdb.c:24 msgid "rebuild database inverted lists from installed package headers" msgstr "從安裝的套件表頭重建資料庫的反相清單" #: rpmdb.c:27 msgid "verify database files" msgstr "驗證資料庫檔案" #: rpmdb.c:33 msgid "Database options:" msgstr "資料庫選項：" #: rpmkeys.c:23 msgid "verify package signature(s)" msgstr "校驗套件簽名" #: rpmkeys.c:25 msgid "import an armored public key" msgstr "匯入一個受保護的公鑰" #: rpmkeys.c:28 rpmkeys.c:30 msgid "list keys from RPM keyring" msgstr "" #: rpmkeys.c:37 #, fuzzy msgid "Keyring options:" msgstr "簽名選項：" #: rpmkeys.c:61 rpmsign.c:144 msgid "no arguments given" msgstr "沒有指定引數" #: rpmsign.c:25 #, fuzzy msgid "sign package(s)" msgstr "安裝套件" #: rpmsign.c:27 msgid "sign package(s) (identical to --addsign)" msgstr "對套件簽名 (與 --addsign 含義相同)" #: rpmsign.c:29 msgid "delete package signatures" msgstr "刪除套件簽名" #: rpmsign.c:35 msgid "Signature options:" msgstr "簽名選項：" #: rpmsign.c:85 sign/rpmgensig.c:196 #, c-format msgid "Could not exec %s: %s\n" msgstr "無法執行 %s: %s\n" #: rpmsign.c:108 #, c-format msgid "You must set \"%%_gpg_name\" in your macro file\n" msgstr "您必須在您的巨集檔案中設定 \"%%_gpg_name\"\n" #: rpmsign.c:113 msgid "Enter pass phrase: " msgstr "輸入密文： " #: rpmsign.c:117 #, c-format msgid "Pass phrase is good.\n" msgstr "密文很好。\n" #: rpmsign.c:123 #, c-format msgid "Pass phrase check failed\n" msgstr "密文偵測失敗\n" #: rpmspec.c:26 #, fuzzy msgid "parse spec file(s) to stdout" msgstr "查詢一個規格檔案" #: rpmspec.c:28 #, fuzzy msgid "query spec file(s)" msgstr "查詢一個規格檔案" #: rpmspec.c:30 msgid "operate on binary rpms generated by spec (default)" msgstr "" #: rpmspec.c:32 msgid "operate on source rpm generated by spec" msgstr "" #: rpmspec.c:36 lib/poptQV.c:189 msgid "use the following query format" msgstr "使用以下的查詢格式" #: rpmspec.c:45 #, fuzzy msgid "Spec options:" msgstr "簽名選項：" #: rpmspec.c:90 #, fuzzy msgid "no arguments given for parse" msgstr "沒有指定查詢引數" #: build/build.c:122 build/pack.c:408 msgid "Unable to open temp file.\n" msgstr "無法開啟暫時檔案。\n" #: build/build.c:170 #, c-format msgid "Executing(%s): %s\n" msgstr "正在執行 (%s)：%s\n" #: build/build.c:177 #, c-format msgid "Exec of %s failed (%s): %s\n" msgstr "執行 %s 失敗 (%s)：%s\n" #: build/build.c:186 #, c-format msgid "Bad exit status from %s (%s)\n" msgstr "來自 (%s) 錯誤的離開狀態 (%s)\n" #: build/build.c:292 msgid "" "\n" "\n" "RPM build errors:\n" msgstr "" "\n" "\n" "RPM 組建錯誤：\n" #: build/expression.c:216 msgid "syntax error while parsing ==\n" msgstr "解析「==」時有語法錯誤\n" #: build/expression.c:246 msgid "syntax error while parsing &&\n" msgstr "解析「&&」時有語法錯誤\n" #: build/expression.c:255 msgid "syntax error while parsing ||\n" msgstr "解析「||」時有語法錯誤\n" #: build/expression.c:305 msgid "parse error in expression\n" msgstr "運算式解析錯誤\n" #: build/expression.c:337 msgid "unmatched (\n" msgstr "不匹配的「(」\n" #: build/expression.c:369 msgid "- only on numbers\n" msgstr "「-」只能用於數字\n" #: build/expression.c:385 msgid "! only on numbers\n" msgstr "「!」只能用於數字\n" #: build/expression.c:427 build/expression.c:475 build/expression.c:533 #: build/expression.c:625 msgid "types must match\n" msgstr "類型必須匹配\n" #: build/expression.c:440 msgid "* / not suported for strings\n" msgstr "不支援將「*」、「/」用於字串\n" #: build/expression.c:491 msgid "- not suported for strings\n" msgstr "不支援將「-」用於字串\n" #: build/expression.c:638 msgid "&& and || not suported for strings\n" msgstr "不支援將「&&」和「||」用於字串\n" #: build/expression.c:671 msgid "syntax error in expression\n" msgstr "運算式中有語法錯誤\n" #: build/files.c:288 build/files.c:481 build/files.c:678 #, c-format msgid "Missing '(' in %s %s\n" msgstr "在 %s %s 中有缺失的「(」\n" #: build/files.c:298 build/files.c:614 build/files.c:688 build/files.c:780 #, c-format msgid "Missing ')' in %s(%s\n" msgstr "在 %s(%s 中有缺失的「)」\n" #: build/files.c:334 build/files.c:637 #, c-format msgid "Invalid %s token: %s\n" msgstr "無效的 %s 符記：%s\n" #: build/files.c:443 #, c-format msgid "Missing %s in %s %s\n" msgstr "在 %s %s 中有缺失的「%s」\n" #: build/files.c:496 #, c-format msgid "Non-white space follows %s(): %s\n" msgstr "%s() 之後有非空白空格：%s\n" #: build/files.c:532 #, c-format msgid "Bad syntax: %s(%s)\n" msgstr "不當的語法：%s(%s)\n" #: build/files.c:541 #, c-format msgid "Bad mode spec: %s(%s)\n" msgstr "不當的模式 spec：%s(%s)\n" #: build/files.c:553 #, c-format msgid "Bad dirmode spec: %s(%s)\n" msgstr "不當的 dirmode spec：%s(%s)\n" #: build/files.c:713 #, c-format msgid "Unusual locale length: \"%.*s\" in %%lang(%s)\n" msgstr "不尋常的語區長度：\"%.*s\" 於 %%lang(%s) 之中\n" #: build/files.c:723 #, c-format msgid "Duplicate locale %.*s in %%lang(%s)\n" msgstr "重製語區 %.*s 於 %%lang(%s) 之中\n" #: build/files.c:795 #, fuzzy, c-format msgid "Invalid capability: %s\n" msgstr "無效的 %s 符記：%s\n" #: build/files.c:806 msgid "File capability support not built in\n" msgstr "" #: build/files.c:860 #, c-format msgid "Only one arg for %%docdir\n" msgstr "%%docdir 只能有一個引數\n" #: build/files.c:889 #, c-format msgid "Two files on one line: %s\n" msgstr "兩個檔案在同一列中：%s\n" #: build/files.c:902 #, c-format msgid "File must begin with \"/\": %s\n" msgstr "檔案必須以「/」開頭：%s\n" #: build/files.c:913 #, c-format msgid "Can't mix special %%doc with other forms: %s\n" msgstr "無法將特殊 %%doc 與其他形式混合：%s\n" #: build/files.c:1053 #, c-format msgid "Unknown file digest algorithm %u, falling back to MD5\n" msgstr "" #: build/files.c:1079 #, c-format msgid "File listed twice: %s\n" msgstr "曾列出兩次的檔案：%s\n" #: build/files.c:1199 #, fuzzy, c-format msgid "reading symlink %s failed: %s\n" msgstr "%s 刪除檔案 %s 失敗：%s\n" #: build/files.c:1207 #, c-format msgid "Symlink points to BuildRoot: %s -> %s\n" msgstr "到 BuildRoot 的符號連結：%s -> %s\n" #: build/files.c:1378 #, c-format msgid "Explicit file attributes required in spec for: %s\n" msgstr "" #: build/files.c:1387 #, fuzzy, c-format msgid "Directory not found: %s\n" msgstr "檔案找不到：%s\n" #: build/files.c:1388 #, c-format msgid "File not found: %s\n" msgstr "檔案找不到：%s\n" #: build/files.c:1505 #, c-format msgid "File %s too large for payload\n" msgstr "" #: build/files.c:1599 #, c-format msgid "%s: can't load unknown tag (%d).\n" msgstr "%s：無法呼叫不明的標記 (%d)。\n" #: build/files.c:1605 #, c-format msgid "%s: public key read failed.\n" msgstr "%s：公鑰讀入失敗。\n" #: build/files.c:1609 #, c-format msgid "%s: not an armored public key.\n" msgstr "%s：不是一個受保護的公鑰。\n" #: build/files.c:1618 #, fuzzy, c-format msgid "%s: failed to encode\n" msgstr "巨集 %%%s 展開時失敗\n" #: build/files.c:1663 #, c-format msgid "File needs leading \"/\": %s\n" msgstr "檔案需要以「/」開頭：%s\n" #: build/files.c:1688 #, c-format msgid "Glob not permitted: %s\n" msgstr "不容許以萬用字元解析：%s\n" #: build/files.c:1700 #, fuzzy, c-format msgid "Directory not found by glob: %s\n" msgstr "以萬用字元解析找不到檔案：%s\n" #: build/files.c:1701 lib/rpminstall.c:419 #, c-format msgid "File not found by glob: %s\n" msgstr "以萬用字元解析找不到檔案：%s\n" #: build/files.c:1749 #, fuzzy, c-format msgid "Could not open %%files file %s: %m\n" msgstr "無法開啟 %%files 的檔案 %s: %s\n" #: build/files.c:1757 #, c-format msgid "line: %s\n" msgstr "列：%s\n" #: build/files.c:2033 #, c-format msgid "Bad file: %s: %s\n" msgstr "損壞的檔案：%s：%s\n" #: build/files.c:2055 build/parsePrep.c:33 #, c-format msgid "Bad owner/group: %s\n" msgstr "損壞的所有者/組別：%s\n" #: build/files.c:2095 #, c-format msgid "Checking for unpackaged file(s): %s\n" msgstr "正在檢查未被打包的檔案：%s\n" #: build/files.c:2110 #, c-format msgid "" "Installed (but unpackaged) file(s) found:\n" "%s" msgstr "" "發現被安裝但未被打包的檔案：\n" "%s" #: build/files.c:2139 #, fuzzy, c-format msgid "Processing files: %s\n" msgstr "正在處理檔案：%s-%s-%s\n" #: build/files.c:2150 msgid "Arch dependent binaries in noarch package\n" msgstr "" #: build/pack.c:83 #, c-format msgid "create archive failed on file %s: %s\n" msgstr "建立檔案 %s 的保存失敗：%s\n" #: build/pack.c:86 #, c-format msgid "create archive failed: %s\n" msgstr "建立保存失敗：%s\n" #: build/pack.c:107 #, c-format msgid "cpio_copy write failed: %s\n" msgstr "cpio_copy 寫作業失敗：%s\n" #: build/pack.c:114 #, c-format msgid "cpio_copy read failed: %s\n" msgstr "cpio_copy 讀作業失敗：%s\n" #: build/pack.c:139 #, fuzzy, c-format msgid "%s: line: %s\n" msgstr "列：%s\n" #: build/pack.c:175 #, c-format msgid "Could not canonicalize hostname: %s\n" msgstr "無法標準化主電腦名稱：%s\n" #: build/pack.c:228 #, c-format msgid "Could not open PreIn file: %s\n" msgstr "無法開啟預先安裝命令稿：%s\n" #: build/pack.c:235 #, c-format msgid "Could not open PreUn file: %s\n" msgstr "無法開啟預先清除命令稿：%s\n" #: build/pack.c:242 #, fuzzy, c-format msgid "Could not open PreTrans file: %s\n" msgstr "無法開啟預先安裝命令稿：%s\n" #: build/pack.c:249 #, c-format msgid "Could not open PostIn file: %s\n" msgstr "無法開啟安裝後命令稿：%s\n" #: build/pack.c:256 #, c-format msgid "Could not open PostUn file: %s\n" msgstr "無法開啟清除後命令稿：%s\n" #: build/pack.c:263 #, fuzzy, c-format msgid "Could not open PostTrans file: %s\n" msgstr "無法開啟安裝後命令稿：%s\n" #: build/pack.c:271 #, c-format msgid "Could not open VerifyScript file: %s\n" msgstr "無法開啟校驗命令稿檔案：%s\n" #: build/pack.c:297 #, c-format msgid "Could not open Trigger script file: %s\n" msgstr "無法開啟觸發執行命令稿檔案：%s\n" #: build/pack.c:371 #, fuzzy, c-format msgid "Unknown payload compression: %s\n" msgstr "不明的圖示類型：%s\n" #: build/pack.c:395 msgid "Unable to create immutable header region.\n" msgstr "無法建立不可變的表頭區域。\n" #: build/pack.c:415 msgid "Unable to write temp header\n" msgstr "無法寫入臨時表頭\n" #: build/pack.c:425 msgid "Bad CSA data\n" msgstr "損壞的 CSA 資料\n" #: build/pack.c:491 msgid "Unable to reload signature header.\n" msgstr "無法重載簽名表頭。\n" #: build/pack.c:499 #, c-format msgid "Could not open %s: %s\n" msgstr "無法開啟 %s：%s\n" #: build/pack.c:511 #, c-format msgid "Unable to write package: %s\n" msgstr "無法寫入套件：%s\n" #: build/pack.c:527 #, c-format msgid "Unable to open sigtarget %s: %s\n" msgstr "無法開啟簽名目標 %s：%s\n" #: build/pack.c:538 #, c-format msgid "Unable to read header from %s: %s\n" msgstr "無法讀取 %s 的表頭：%s\n" #: build/pack.c:552 #, c-format msgid "Unable to write header to %s: %s\n" msgstr "無法寫入 %s 的表頭：%s\n" #: build/pack.c:564 #, c-format msgid "Unable to read payload from %s: %s\n" msgstr "無法從 %s 讀取酬載: %s\n" #: build/pack.c:571 #, c-format msgid "Unable to write payload to %s: %s\n" msgstr "無法寫入酬載到 %s: %s\n" #: build/pack.c:609 #, c-format msgid "Wrote: %s\n" msgstr "已寫入：%s\n" #: build/pack.c:660 #, fuzzy, c-format msgid "Executing \"%s\":\n" msgstr "正在執行 (%s)：%s\n" #: build/pack.c:663 #, fuzzy, c-format msgid "Execution of \"%s\" failed.\n" msgstr "執行 %s 失敗 (%s)：%s\n" #: build/pack.c:667 #, fuzzy, c-format msgid "Package check \"%s\" failed.\n" msgstr "密文偵測失敗\n" #: build/pack.c:723 #, c-format msgid "Could not generate output filename for package %s: %s\n" msgstr "無法產生套件 %s 的檔案名稱輸出：%s\n" #: build/pack.c:740 #, c-format msgid "cannot create %s: %s\n" msgstr "無法建立 %s：%s\n" #: build/parseBuildInstallClean.c:35 #, c-format msgid "line %d: second %s\n" msgstr "列 %d：重複的 %s\n" #: build/parseChangelog.c:131 #, c-format msgid "%%changelog entries must start with *\n" msgstr "%%changelog 條目必須以「*」符號開頭\n" #: build/parseChangelog.c:139 #, c-format msgid "incomplete %%changelog entry\n" msgstr "不完整的 %%changelog 條目\n" #: build/parseChangelog.c:154 #, c-format msgid "bad date in %%changelog: %s\n" msgstr "%%changelog 中含有不正確的日期描述：%s\n" #: build/parseChangelog.c:159 #, c-format msgid "%%changelog not in descending chronological order\n" msgstr "%%changelog 無法繼承年代順序的描述。\n" #: build/parseChangelog.c:167 build/parseChangelog.c:178 #, c-format msgid "missing name in %%changelog\n" msgstr "%%changelog 中漏失了名稱\n" #: build/parseChangelog.c:185 #, c-format msgid "no description in %%changelog\n" msgstr "%%changelog 中沒有更新說明\n" #: build/parseDescription.c:32 #, c-format msgid "line %d: Error parsing %%description: %s\n" msgstr "列 %d：解析 %%description 時發生錯誤：%s\n" #: build/parseDescription.c:45 build/parseFiles.c:43 build/parsePolicies.c:45 #: build/parseScript.c:232 #, c-format msgid "line %d: Bad option %s: %s\n" msgstr "列 %d：損壞的選項 %s：%s\n" #: build/parseDescription.c:56 build/parseFiles.c:54 build/parsePolicies.c:55 #: build/parseScript.c:243 #, c-format msgid "line %d: Too many names: %s\n" msgstr "列 %d: 太多名稱：%s\n" #: build/parseDescription.c:64 build/parseFiles.c:62 build/parsePolicies.c:62 #: build/parseScript.c:251 #, c-format msgid "line %d: Package does not exist: %s\n" msgstr "列 %d：套件不存在：%s\n" #: build/parseDescription.c:74 #, c-format msgid "line %d: Second description\n" msgstr "列 %d：重複的 description\n" #: build/parseFiles.c:30 #, c-format msgid "line %d: Error parsing %%files: %s\n" msgstr "列 %d：解析 %%files 時發生錯誤：%s\n" #: build/parsePolicies.c:32 #, fuzzy, c-format msgid "line %d: Error parsing %%policies: %s\n" msgstr "列 %d：解析 %%files 時發生錯誤：%s\n" #: build/parsePreamble.c:155 #, c-format msgid "line %d: Bad number: %s\n" msgstr "列 %d：錯誤的編號：%s\n" #: build/parsePreamble.c:161 #, fuzzy, c-format msgid "line %d: Bad no%s number: %u\n" msgstr "列 %d: 不當的 no%s 數字：%d\n" #: build/parsePreamble.c:224 #, c-format msgid "line %d: Bad %s number: %s\n" msgstr "列 %d: 不當的 %s 數字：%s\n" #: build/parsePreamble.c:238 #, fuzzy, c-format msgid "%s %d defined multiple times\n" msgstr "「%s」指定了多個套件\n" #: build/parsePreamble.c:401 #, c-format msgid "Architecture is excluded: %s\n" msgstr "已被排除的架構：%s\n" #: build/parsePreamble.c:406 #, c-format msgid "Architecture is not included: %s\n" msgstr "未被包含的架構：%s\n" #: build/parsePreamble.c:411 #, c-format msgid "OS is excluded: %s\n" msgstr "已被排除的作業系統：%s\n" #: build/parsePreamble.c:416 #, c-format msgid "OS is not included: %s\n" msgstr "未被包含的作業系統：%s\n" #: build/parsePreamble.c:442 #, c-format msgid "%s field must be present in package: %s\n" msgstr "必須在目前套件中宣告 %s 欄位：%s\n" #: build/parsePreamble.c:465 #, c-format msgid "Duplicate %s entries in package: %s\n" msgstr "套件中有重複的 %s 條目：%s\n" #: build/parsePreamble.c:519 #, c-format msgid "illegal _docdir_fmt: %s\n" msgstr "" #: build/parsePreamble.c:547 #, c-format msgid "Unable to open icon %s: %s\n" msgstr "無法開啟圖示 %s：%s\n" #: build/parsePreamble.c:563 #, c-format msgid "Unable to read icon %s: %s\n" msgstr "無法讀取圖示 %s：%s\n" #: build/parsePreamble.c:573 #, c-format msgid "Unknown icon type: %s\n" msgstr "不明的圖示類型：%s\n" #: build/parsePreamble.c:587 #, c-format msgid "line %d: Tag takes single token only: %s\n" msgstr "列 %d: 標記只需單一符記：%s\n" #: build/parsePreamble.c:607 #, fuzzy, c-format msgid "line %d: Illegal char '%c' in: %s\n" msgstr "列 %d：在 %s 中出現違規字元「-」：%s\n" #: build/parsePreamble.c:610 #, fuzzy, c-format msgid "line %d: Illegal char in: %s\n" msgstr "列 %d：在 %s 中出現違規字元「-」：%s\n" #: build/parsePreamble.c:616 #, fuzzy, c-format msgid "line %d: Illegal sequence \"..\" in: %s\n" msgstr "列 %d：在 %s 中出現違規字元「-」：%s\n" #: build/parsePreamble.c:641 #, c-format msgid "line %d: Malformed tag: %s\n" msgstr "列 %d: 異常的標記：%s\n" #: build/parsePreamble.c:649 #, c-format msgid "line %d: Empty tag: %s\n" msgstr "列 %d: 清空標記：%s\n" #: build/parsePreamble.c:706 #, c-format msgid "line %d: Prefixes must not end with \"/\": %s\n" msgstr "列 %d：Prefixes 不能以「/」結尾：%s\n" #: build/parsePreamble.c:719 #, c-format msgid "line %d: Docdir must begin with '/': %s\n" msgstr "列 %d：Docdir 必須以「/」開頭：%s\n" #: build/parsePreamble.c:732 #, fuzzy, c-format msgid "line %d: Epoch field must be an unsigned number: %s\n" msgstr "列 %d：Epoch/Serial 欄位的內容必須是一個數字：%s\n" #: build/parsePreamble.c:773 #, c-format msgid "line %d: Bad %s: qualifiers: %s\n" msgstr "列 %d: 不當的 %s: 限定詞：%s\n" #: build/parsePreamble.c:800 #, c-format msgid "line %d: Bad BuildArchitecture format: %s\n" msgstr "列 %d：損壞的組建架構格式：%s\n" #: build/parsePreamble.c:810 #, c-format msgid "line %d: Only noarch subpackages are supported: %s\n" msgstr "" #: build/parsePreamble.c:825 #, c-format msgid "Internal error: Bogus tag %d\n" msgstr "內部錯誤：假造的標記 %d\n" #: build/parsePreamble.c:909 #, fuzzy, c-format msgid "line %d: %s is deprecated: %s\n" msgstr "列 %d：需要版本描述：%s\n" #: build/parsePreamble.c:972 #, c-format msgid "Bad package specification: %s\n" msgstr "不當的套件規格：%s\n" #: build/parsePreamble.c:978 #, c-format msgid "Package already exists: %s\n" msgstr "套件已存在：%s\n" #: build/parsePreamble.c:1009 #, c-format msgid "line %d: Unknown tag: %s\n" msgstr "列 %d：不明標記：%s\n" #: build/parsePreamble.c:1041 #, fuzzy, c-format msgid "%%{buildroot} couldn't be empty\n" msgstr "BuildRoot 不能是「/」：%s\n" #: build/parsePreamble.c:1045 #, fuzzy, c-format msgid "%%{buildroot} can not be \"/\"\n" msgstr "BuildRoot 不能是「/」：%s\n" #: build/parsePrep.c:28 #, c-format msgid "Bad source: %s: %s\n" msgstr "損壞的原始碼檔案：%s：%s\n" #: build/parsePrep.c:73 #, fuzzy, c-format msgid "No patch number %u\n" msgstr "編號為 %d 的修補不存在\n" #: build/parsePrep.c:75 #, c-format msgid "%%patch without corresponding \"Patch:\" tag\n" msgstr "" #: build/parsePrep.c:152 #, fuzzy, c-format msgid "No source number %u\n" msgstr "編號為 %d 的原始碼檔案不存在\n" #: build/parsePrep.c:154 #, fuzzy msgid "No \"Source:\" tag in the spec file\n" msgstr "原始碼套件內沒有 .spec 檔案\n" #: build/parsePrep.c:173 #, c-format msgid "Couldn't download nosource %s: %s\n" msgstr "無法下載 nosource %s: %s\n" #: build/parsePrep.c:277 #, c-format msgid "Error parsing %%setup: %s\n" msgstr "解析 %%setup 時發生錯誤：%s\n" #: build/parsePrep.c:288 #, c-format msgid "line %d: Bad arg to %%setup: %s\n" msgstr "列 %d：%%setup 中出現錯誤的引數：%s\n" #: build/parsePrep.c:303 #, c-format msgid "line %d: Bad %%setup option %s: %s\n" msgstr "列 %d：%%setup 中出現錯誤的選項 %s：%s\n" #: build/parsePrep.c:462 #, fuzzy, c-format msgid "%s: %s: %s\n" msgstr "%s：%s\n" #: build/parsePrep.c:475 #, fuzzy, c-format msgid "Invalid patch number %s: %s\n" msgstr "不正確的套件編號：%s\n" #: build/parsePrep.c:502 #, c-format msgid "line %d: second %%prep\n" msgstr "列 %d：重複的 %%prep\n" #: build/parseReqs.c:112 #, fuzzy msgid "Dependency tokens must begin with alpha-numeric, '_' or '/'" msgstr "列 %d：相依關係的表述必須以數字、「_」或「/」開頭：%s\n" #: build/parseReqs.c:137 #, fuzzy msgid "Versioned file name not permitted" msgstr "列 %d: 不容許標上版本的檔案名稱：%s\n" #: build/parseReqs.c:154 #, fuzzy msgid "Version required" msgstr "列 %d：需要版本描述：%s\n" #: build/parseReqs.c:165 #, fuzzy msgid "invalid dependency" msgstr "列 %d：錯誤的編號：%s\n" #: build/parseReqs.c:181 #, fuzzy, c-format msgid "line %d: %s: %s\n" msgstr "列 %d：%s\n" #: build/parseScript.c:192 #, c-format msgid "line %d: triggers must have --: %s\n" msgstr "列 %d：觸發器必須包含「--」：%s\n" #: build/parseScript.c:202 build/parseScript.c:265 #, c-format msgid "line %d: Error parsing %s: %s\n" msgstr "列 %d：解析 %s 時發生錯誤：%s\n" #: build/parseScript.c:214 #, c-format msgid "line %d: internal script must end with '>': %s\n" msgstr "列 %d：內建命令稿必須以「>」結尾：%s\n" #: build/parseScript.c:220 #, c-format msgid "line %d: script program must begin with '/': %s\n" msgstr "列 %d：命令稿程式必須以「/」開頭：%s\n" #: build/parseScript.c:258 #, c-format msgid "line %d: Second %s\n" msgstr "列 %d：重複的 %s\n" #: build/parseScript.c:304 #, c-format msgid "line %d: unsupported internal script: %s\n" msgstr "列 %d：不支援的內建命令稿：%s\n" #: build/parseSpec.c:201 #, c-format msgid "line %d: %s\n" msgstr "列 %d：%s\n" #: build/parseSpec.c:245 #, c-format msgid "Unable to open %s: %s\n" msgstr "無法開啟 %s：%s\n" #: build/parseSpec.c:257 #, c-format msgid "Unclosed %%if\n" msgstr "%%if 分支未關閉\n" #: build/parseSpec.c:296 #, c-format msgid "line %d: unclosed macro or bad line continuation\n" msgstr "" #: build/parseSpec.c:348 #, c-format msgid "%s:%d: parseExpressionBoolean returns %d\n" msgstr "%s:%d: parseExpressionBoolean 回傳 %d\n" #: build/parseSpec.c:357 #, c-format msgid "%s:%d: Got a %%else with no %%if\n" msgstr "%s:%d：缺少與 %%if 對應的 %%if\n" #: build/parseSpec.c:369 #, c-format msgid "%s:%d: Got a %%endif with no %%if\n" msgstr "%s:%d：缺少與 %%endif 對應的 %%if\n" #: build/parseSpec.c:383 build/parseSpec.c:392 #, c-format msgid "malformed %%include statement\n" msgstr "異常的 %%include 宣告\n" #: build/parseSpec.c:639 msgid "No compatible architectures found for build\n" msgstr "沒有可供組建的相容硬體架構\n" #: build/parseSpec.c:673 #, c-format msgid "Package has no %%description: %s\n" msgstr "套件沒有 %%description：%s\n" #: build/policies.c:86 #, c-format msgid "Policy module '%s' duplicated with overlapping types\n" msgstr "" #: build/policies.c:92 #, c-format msgid "Base modules '%s' and '%s' have overlapping types\n" msgstr "" #: build/policies.c:100 #, fuzzy msgid "Failed to get policies from header\n" msgstr "無法從 %s 讀取規格檔案\n" #: build/policies.c:153 #, c-format msgid "%%semodule requires a file path\n" msgstr "" #: build/policies.c:162 #, fuzzy, c-format msgid "Failed to read policy file: %s\n" msgstr "無法從 %s 讀取規格檔案\n" #: build/policies.c:169 #, fuzzy, c-format msgid "Failed to encode policy file: %s\n" msgstr "無法從 %s 讀取規格檔案\n" #: build/policies.c:186 #, fuzzy, c-format msgid "Failed to determine a policy name: %s\n" msgstr "無法開啟打包管道：%m\n" #: build/policies.c:198 #, c-format msgid "" "'%s' type given with other types in %%semodule %s. Compacting types to " "'%s'.\n" msgstr "" #: build/policies.c:245 #, fuzzy, c-format msgid "Error parsing %s: %s\n" msgstr "解析 %%setup 時發生錯誤：%s\n" #: build/policies.c:251 #, fuzzy, c-format msgid "Expecting %%semodule tag: %s\n" msgstr "正在執行 (%s)：%s\n" #: build/policies.c:261 #, fuzzy, c-format msgid "Missing module path in line: %s\n" msgstr "在 %s %s 中有缺失的「%s」\n" #: build/policies.c:267 #, fuzzy, c-format msgid "Too many arguments in line: %s\n" msgstr "在資料列的 %s:%d 中有太多引數\n" #: build/policies.c:305 #, fuzzy, c-format msgid "Processing policies: %s\n" msgstr "正在處理檔案：%s-%s-%s\n" #: build/rpmfc.c:107 #, fuzzy, c-format msgid "Ignoring invalid regex %s\n" msgstr "列 %d：錯誤的編號：%s\n" #: build/rpmfc.c:222 #, fuzzy, c-format msgid "Couldn't create pipe for %s: %m\n" msgstr "無法開啟 %s：%s\n" #: build/rpmfc.c:247 #, fuzzy, c-format msgid "Couldn't exec %s: %s\n" msgstr "無法執行 %s: %s\n" #: build/rpmfc.c:252 lib/rpmscript.c:257 #, fuzzy, c-format msgid "Couldn't fork %s: %s\n" msgstr "無法開啟 %s：%s\n" #: build/rpmfc.c:343 #, fuzzy, c-format msgid "%s failed: %x\n" msgstr "%s 失敗：%s\n" #: build/rpmfc.c:347 #, fuzzy, c-format msgid "failed to write all data to %s: %s\n" msgstr "無法寫入酬載到 %s: %s\n" #: build/rpmfc.c:846 #, c-format msgid "Conversion of %s to long integer failed.\n" msgstr "" #: build/rpmfc.c:934 #, fuzzy msgid "No file attributes configured\n" msgstr "寫入簽名時 gpg 失敗\n" #: build/rpmfc.c:951 #, fuzzy, c-format msgid "magic_open(0x%x) failed: %s\n" msgstr "開啟 %s 失敗：%s\n" #: build/rpmfc.c:958 #, fuzzy, c-format msgid "magic_load failed: %s\n" msgstr "%s 移除目錄 %s 失敗：%s\n" #: build/rpmfc.c:999 #, c-format msgid "Recognition of file \"%s\" failed: mode %06o %s\n" msgstr "" #: build/rpmfc.c:1200 #, fuzzy, c-format msgid "Finding %s: %s\n" msgstr "檔案 %s: %s\n" #: build/rpmfc.c:1205 build/rpmfc.c:1214 #, fuzzy, c-format msgid "Failed to find %s:\n" msgstr "讀取 %s 失敗: %s。\n" #: build/spec.c:413 #, c-format msgid "query of specfile %s failed, can't parse\n" msgstr "規格檔 %s 的查詢失敗，無法剖析\n" #: lib/cpio.c:195 #, c-format msgid "(error 0x%x)" msgstr "(error 0x%x)" #: lib/cpio.c:199 msgid "Bad magic" msgstr "不當的魔法數字" #: lib/cpio.c:200 msgid "Bad/unreadable header" msgstr "損壞或無法讀取的表頭" #: lib/cpio.c:223 msgid "Header size too big" msgstr "表頭尺寸過大" #: lib/cpio.c:224 msgid "Unknown file type" msgstr "不明的檔案類型" #: lib/cpio.c:225 msgid "Missing hard link(s)" msgstr "丟失的硬式鏈結" #: lib/cpio.c:226 #, fuzzy msgid "Digest mismatch" msgstr "MD5 比照結果不匹配" #: lib/cpio.c:227 msgid "Internal error" msgstr "內部錯誤" #: lib/cpio.c:228 msgid "Archive file not in header" msgstr "在檔頭中沒有歸檔檔案" #: lib/cpio.c:239 msgid " failed - " msgstr " 失敗 - " #: lib/depends.c:244 #, c-format msgid "package %s was already added, skipping %s\n" msgstr "套件 %s 已被加入，忽略 %s\n" #: lib/depends.c:245 #, c-format msgid "package %s was already added, replacing with %s\n" msgstr "套件 %s 已被加入，替換 %s\n" #: lib/formats.c:71 lib/formats.c:112 lib/formats.c:202 lib/formats.c:229 #: lib/formats.c:280 lib/formats.c:302 lib/formats.c:543 lib/formats.c:582 #: lib/formats.c:621 msgid "(not a number)" msgstr "(不是數字)" #: lib/formats.c:138 #, c-format msgid "%c" msgstr "%c" #: lib/formats.c:149 msgid "%a %b %d %Y" msgstr "%a %b %d %Y" #: lib/formats.c:340 msgid "(not base64)" msgstr "(不是 base64)" #: lib/formats.c:352 msgid "(invalid type)" msgstr "(無效型態)" #: lib/formats.c:376 lib/formats.c:462 msgid "(not a blob)" msgstr "(不是 blob)" #: lib/formats.c:415 msgid "(invalid xml type)" msgstr "(無效 xml 型態)" #: lib/formats.c:485 msgid "(not an OpenPGP signature)" msgstr "(不是一個 OpenPGP 簽名)" #: lib/formats.c:588 #, fuzzy msgid "normal" msgstr "正常 " #: lib/formats.c:591 #, fuzzy msgid "replaced" msgstr "被替換 " #: lib/formats.c:594 #, fuzzy msgid "not installed" msgstr "未安裝 " #: lib/formats.c:597 #, fuzzy msgid "net shared" msgstr "網路共享 " #: lib/formats.c:600 #, fuzzy msgid "wrong color" msgstr "錯誤顏色 " #: lib/formats.c:603 #, fuzzy msgid "missing" msgstr "缺少 %c %s" #: lib/formats.c:606 #, fuzzy msgid "(unknown)" msgstr "(不明的 %3d) " #: lib/formats.c:645 #, fuzzy msgid "(not a string)" msgstr "(不是數字)" #: lib/fsm.c:737 #, c-format msgid "user %s does not exist - using root\n" msgstr "使用者 %s 不存在 - 現使用 root 代替\n" #: lib/fsm.c:744 #, c-format msgid "group %s does not exist - using root\n" msgstr "使用者組 %s 不存在 - 現使用 root 代替\n" #: lib/fsm.c:1350 #, c-format msgid "archive file %s was not found in header file list\n" msgstr "保存檔案 %s 在檔案清單表頭中找不到\n" #: lib/fsm.c:1805 lib/fsm.c:1950 #, c-format msgid "%s saved as %s\n" msgstr "%s 已被另存為 %s\n" #: lib/fsm.c:1977 #, c-format msgid "%s rmdir of %s failed: Directory not empty\n" msgstr "%s 移除目錄 %s 失敗：目錄非空\n" #: lib/fsm.c:1983 #, c-format msgid "%s rmdir of %s failed: %s\n" msgstr "%s 移除目錄 %s 失敗：%s\n" #: lib/fsm.c:1997 #, c-format msgid "%s unlink of %s failed: %s\n" msgstr "%s 刪除檔案 %s 失敗：%s\n" #: lib/fsm.c:2019 #, c-format msgid "%s created as %s\n" msgstr "%s 如同 %s 而建立\n" #: lib/package.c:192 #, c-format msgid "skipping %s with unverifiable V%u signature\n" msgstr "" #: lib/package.c:226 #, c-format msgid "blob size(%d): BAD, 8 + 16 * il(%d) + dl(%d)\n" msgstr "blob 大小(%d):不當的， 8 + 16 * il(%d) + dl(%d)\n" #: lib/package.c:237 lib/package.c:292 lib/package.c:360 lib/signature.c:129 #, c-format msgid "tag[%d]: BAD, tag %d type %d offset %d count %d\n" msgstr "標記[%d]:不當的，標記 %d 型態 %d 偏移 %d 計數 %d\n" #: lib/package.c:255 lib/signature.c:143 #, c-format msgid "region offset: BAD, tag %d type %d offset %d count %d\n" msgstr "區域偏移：不當的，標記 %d 型態 %d 偏移 %d 計數 %d\n" #: lib/package.c:273 lib/signature.c:167 #, c-format msgid "region trailer: BAD, tag %d type %d offset %d count %d\n" msgstr "區域結尾：不當的，標記 %d 型態 %d 偏移 %d 計數 %d\n" #: lib/package.c:283 lib/signature.c:177 #, c-format msgid "region size: BAD, ril(%d) > il(%d)\n" msgstr "區域大小：不當的， ril(%d)> il(%d)\n" #: lib/package.c:310 msgid "hdr SHA1: BAD, not hex\n" msgstr "hdr SHA1: 不當的，不是十六進位\n" #: lib/package.c:322 msgid "hdr RSA: BAD, not binary\n" msgstr "hdr RSA：不適當，不是二進位\n" #: lib/package.c:332 msgid "hdr DSA: BAD, not binary\n" msgstr "hdr DSA：不當的，不是二進位\n" #: lib/package.c:473 #, c-format msgid "hdr size(%d): BAD, read returned %d\n" msgstr "hdr 大小(%d):不當的，讀取回傳 %d\n" #: lib/package.c:477 msgid "hdr magic: BAD\n" msgstr "hdr magic：不當的\n" #: lib/package.c:482 #, c-format msgid "hdr tags: BAD, no. of tags(%d) out of range\n" msgstr "hdr 標記：不當的，號碼的標記(%d)發信匣的範圍\n" #: lib/package.c:488 #, c-format msgid "hdr data: BAD, no. of bytes(%d) out of range\n" msgstr "hdr 資料：不當的，號碼的位元組(%d)發信匣的範圍\n" #: lib/package.c:498 #, fuzzy, c-format msgid "hdr blob(%zd): BAD, read returned %d\n" msgstr "hdr blob(%d):不當的，讀取回傳 %d\n" #: lib/package.c:510 msgid "hdr load: BAD\n" msgstr "hdr 載入：不當的\n" #: lib/package.c:582 lib/rpmchecksig.c:296 sign/rpmgensig.c:464 #, c-format msgid "%s: rpmReadSignature failed: %s" msgstr "%s：rpmReadSignature 失敗：%s" #: lib/package.c:589 lib/rpmchecksig.c:303 sign/rpmgensig.c:471 #, c-format msgid "%s: No signature available\n" msgstr "%s：未發現簽名\n" #: lib/package.c:631 #, c-format msgid "%s: headerRead failed: %s" msgstr "%s:：headerRead 失敗：%s" #: lib/package.c:686 lib/rpmchecksig.c:137 sign/rpmgensig.c:94 #, c-format msgid "%s: Fread failed: %s\n" msgstr "%s: Fread 失敗：%s\n" #: lib/package.c:794 #, fuzzy, c-format msgid "%s is a Delta RPM and cannot be directly installed\n" msgstr "%s 無法安裝\n" #: lib/package.c:798 #, c-format msgid "Unsupported payload (%s) in package %s\n" msgstr "" #: lib/poptALL.c:161 msgid "predefine MACRO with value EXPR" msgstr "預先以值 EXPR 定義巨集" #: lib/poptALL.c:162 lib/poptALL.c:165 msgid "'MACRO EXPR'" msgstr "「巨集 EXPR」" #: lib/poptALL.c:164 msgid "define MACRO with value EXPR" msgstr "定義巨集附有值 EXPR" #: lib/poptALL.c:167 msgid "print macro expansion of EXPR" msgstr "印出巨集展開的 EXPR" #: lib/poptALL.c:168 msgid "'EXPR'" msgstr "「EXPR」" #: lib/poptALL.c:170 lib/poptALL.c:184 msgid "read instead of default file(s)" msgstr "讀取 <檔案:…> 以代替預設檔案" #: lib/poptALL.c:171 lib/poptALL.c:185 msgid "" msgstr "<檔案:…>" #: lib/poptALL.c:174 msgid "don't verify package digest(s)" msgstr "不校驗套件摘要" #: lib/poptALL.c:176 msgid "don't verify database header(s) when retrieved" msgstr "取回時不驗證資料庫表頭" #: lib/poptALL.c:178 msgid "don't verify package signature(s)" msgstr "不校驗套件簽名" #: lib/poptALL.c:181 msgid "send stdout to CMD" msgstr "發送標準輸出到 CMD" #: lib/poptALL.c:182 msgid "CMD" msgstr "CMD" #: lib/poptALL.c:187 msgid "use ROOT as top level directory" msgstr "使用 ROOT 做為頂層目錄" #: lib/poptALL.c:188 msgid "ROOT" msgstr "ROOT" #: lib/poptALL.c:190 msgid "use database in DIRECTORY" msgstr "" #: lib/poptALL.c:191 msgid "DIRECTORY" msgstr "" #: lib/poptALL.c:194 msgid "display known query tags" msgstr "顯示已知的查詢標記" #: lib/poptALL.c:196 msgid "display final rpmrc and macro configuration" msgstr "顯示完整的 rpmrc 與巨集定義配置" #: lib/poptALL.c:198 msgid "provide less detailed output" msgstr "提供較少的細節輸出" #: lib/poptALL.c:200 msgid "provide more detailed output" msgstr "提供較多的細節輸出" #: lib/poptALL.c:202 msgid "print the version of rpm being used" msgstr "印出正在使用的 rpm 版本資訊" #: lib/poptALL.c:208 msgid "debug payload file state machine" msgstr "對酬載檔案狀態機器除錯" #: lib/poptALL.c:214 msgid "debug rpmio I/O" msgstr "對 rpmio I/O 除錯" #: lib/poptALL.c:292 #, c-format msgid "%s: option table misconfigured (%d)\n" msgstr "%s: 選項表格 misconfigured(%d)\n" #: lib/poptI.c:52 msgid "exclude paths must begin with a /" msgstr "被排除的路徑必須以「/」開頭" #: lib/poptI.c:64 msgid "relocations must begin with a /" msgstr "重新部署引數必須以「/」開頭" #: lib/poptI.c:67 msgid "relocations must contain a =" msgstr "重新部署引數必須包含一個「=」" #: lib/poptI.c:70 msgid "relocations must have a / following the =" msgstr "重新部署引數中必須有一個在「=」後的「/」" #: lib/poptI.c:114 msgid "install all files, even configurations which might otherwise be skipped" msgstr "安裝所有檔案，即使配置檔案可能會被略過" #: lib/poptI.c:118 msgid "" "remove all packages which match (normally an error is generated if " " specified multiple packages)" msgstr "" "移除所有匹配<套件>的套件 (如果<套件>被指定為多個套件，常會導致錯誤出現)" #: lib/poptI.c:123 msgid "relocate files in non-relocatable package" msgstr "對不可重新部署的套件重新部署檔案" #: lib/poptI.c:127 msgid "print dependency loops as warning" msgstr "印出循環的相依關係做為警告" #: lib/poptI.c:131 msgid "erase (uninstall) package" msgstr "清除(反安裝)套件" #: lib/poptI.c:131 msgid "+" msgstr "<套件>+" #: lib/poptI.c:134 lib/poptI.c:171 msgid "do not install configuration files" msgstr "不安裝配置檔案" #: lib/poptI.c:137 lib/poptI.c:176 msgid "do not install documentation" msgstr "不安裝文件" #: lib/poptI.c:139 msgid "skip files with leading component " msgstr "略過指定的 <路徑> 後的檔案 " #: lib/poptI.c:140 msgid "" msgstr "<路徑>" #: lib/poptI.c:143 msgid "short hand for --replacepkgs --replacefiles" msgstr "--replacepkgs 與 --replacefiles 的速寫" #: lib/poptI.c:147 msgid "upgrade package(s) if already installed" msgstr "如果套件已安裝，執行更新" #: lib/poptI.c:148 lib/poptI.c:164 lib/poptI.c:249 msgid "+" msgstr "<套件檔案>+" #: lib/poptI.c:150 msgid "print hash marks as package installs (good with -v)" msgstr "印出出安裝套件的 Hash 碼 (常和 -v 同時使用)" #: lib/poptI.c:153 msgid "don't verify package architecture" msgstr "不偵測套件的相容架構" #: lib/poptI.c:156 msgid "don't verify package operating system" msgstr "不偵測套件的相容作業系統" #: lib/poptI.c:159 msgid "don't check disk space before installing" msgstr "安裝前不偵測磁碟剩餘空間" #: lib/poptI.c:161 msgid "install documentation" msgstr "安裝文件" #: lib/poptI.c:164 msgid "install package(s)" msgstr "安裝套件" #: lib/poptI.c:167 msgid "update the database, but do not modify the filesystem" msgstr "僅更新資料庫，但不對檔案系統進行修改" #: lib/poptI.c:173 msgid "do not verify package dependencies" msgstr "不偵測套件相依性" #: lib/poptI.c:179 lib/poptQV.c:204 lib/poptQV.c:206 #, fuzzy msgid "don't verify digest of files" msgstr "不校驗檔案的 MD5 碼值" #: lib/poptI.c:181 #, fuzzy msgid "don't verify digest of files (obsolete)" msgstr "不校驗檔案的 MD5 碼值" #: lib/poptI.c:183 msgid "don't install file security contexts" msgstr "不安裝檔案安全上下文" #: lib/poptI.c:187 msgid "do not reorder package installation to satisfy dependencies" msgstr "不重新排列套件安裝順序以滿足相依鏈" #: lib/poptI.c:191 msgid "do not execute package scriptlet(s)" msgstr "不執行套件內建短命令稿" #: lib/poptI.c:195 #, c-format msgid "do not execute %%pre scriptlet (if any)" msgstr "不執行預先安裝短命令稿(如果存在)" #: lib/poptI.c:198 #, c-format msgid "do not execute %%post scriptlet (if any)" msgstr "不執行安裝後短命令稿(如果存在)" #: lib/poptI.c:201 #, c-format msgid "do not execute %%preun scriptlet (if any)" msgstr "不執行預先安裝短命令稿(如果存在)" #: lib/poptI.c:204 #, c-format msgid "do not execute %%postun scriptlet (if any)" msgstr "不執行預先安裝短命令稿(如果存在)" #: lib/poptI.c:207 msgid "do not execute any scriptlet(s) triggered by this package" msgstr "不執行套件內的任何可觸發短命令稿" #: lib/poptI.c:210 #, c-format msgid "do not execute any %%triggerprein scriptlet(s)" msgstr "不執行任何預先作業觸發執行的短命令稿" #: lib/poptI.c:213 #, c-format msgid "do not execute any %%triggerin scriptlet(s)" msgstr "不執行任何安裝中觸發執行的短命令稿" #: lib/poptI.c:216 #, c-format msgid "do not execute any %%triggerun scriptlet(s)" msgstr "不執行任何清除中觸發執行的短命令稿" #: lib/poptI.c:219 #, c-format msgid "do not execute any %%triggerpostun scriptlet(s)" msgstr "不執行任何作業後觸發執行的短命令稿" #: lib/poptI.c:223 msgid "do not perform any collection actions" msgstr "" #: lib/poptI.c:227 msgid "" "upgrade to an old version of the package (--force on upgrades does this " "automatically)" msgstr "更新到一個舊版本的套件 (在更新作業中 --force 指令會自動進行此步驟)" #: lib/poptI.c:231 msgid "print percentages as package installs" msgstr "安裝套件時印出進度百分比" #: lib/poptI.c:233 msgid "relocate the package to , if relocatable" msgstr "如果可以，把套件重新部署到 <目錄>" #: lib/poptI.c:234 msgid "" msgstr "<目錄>" #: lib/poptI.c:236 msgid "relocate files from path to " msgstr "將檔案從 <舊目錄> 重新部署到 <新目錄>" #: lib/poptI.c:237 msgid "=" msgstr "<舊目錄>=<新目錄>" #: lib/poptI.c:240 msgid "ignore file conflicts between packages" msgstr "忽略套件之間的檔案衝突" #: lib/poptI.c:243 msgid "reinstall if the package is already present" msgstr "如果套件已存在則重新安裝" #: lib/poptI.c:245 msgid "don't install, but tell if it would work or not" msgstr "不真正安裝，只回報作業結果是否正確" #: lib/poptI.c:248 msgid "upgrade package(s)" msgstr "更新套件" #: lib/poptQV.c:67 msgid "query/verify all packages" msgstr "查詢/校驗所有套件" #: lib/poptQV.c:69 msgid "rpm checksig mode" msgstr "rpm 檢查簽名模式" #: lib/poptQV.c:71 msgid "query/verify package(s) owning file" msgstr "查詢/校驗屬於套件的檔案" #: lib/poptQV.c:73 msgid "query/verify package(s) in group" msgstr "查詢/校驗套件所屬的組別" #: lib/poptQV.c:75 msgid "query/verify a package file" msgstr "查詢/校驗一個套件檔案" #: lib/poptQV.c:78 msgid "query/verify package(s) with package identifier" msgstr "根據套件的識別查詢/校驗套件" #: lib/poptQV.c:80 msgid "query/verify package(s) with header identifier" msgstr "根據表頭識別查詢/校驗套件" #: lib/poptQV.c:83 msgid "rpm query mode" msgstr "rpm 查詢模式" #: lib/poptQV.c:85 msgid "query/verify a header instance" msgstr "查詢/驗證表頭實體" #: lib/poptQV.c:87 msgid "query/verify package(s) from install transaction" msgstr "從安裝異動作業查詢/驗證套件" #: lib/poptQV.c:89 msgid "query the package(s) triggered by the package" msgstr "查詢由套件所觸發的套件" #: lib/poptQV.c:91 msgid "rpm verify mode" msgstr "rpm 校驗模式" #: lib/poptQV.c:93 msgid "query/verify the package(s) which require a dependency" msgstr "查詢/校驗需要某個相依物件的套件" #: lib/poptQV.c:95 msgid "query/verify the package(s) which provide a dependency" msgstr "查詢/校驗提供某個相依物件的套件" #: lib/poptQV.c:98 msgid "do not glob arguments" msgstr "不以萬用字元解析引數" #: lib/poptQV.c:100 msgid "do not process non-package files as manifests" msgstr "不以清單方式處理非套件檔案" #: lib/poptQV.c:171 msgid "list all configuration files" msgstr "列出所有配置檔案" #: lib/poptQV.c:173 msgid "list all documentation files" msgstr "列出所有文件檔案" #: lib/poptQV.c:175 msgid "dump basic file information" msgstr "調出基本的檔案資訊" #: lib/poptQV.c:179 msgid "list files in package" msgstr "列出套件內的檔案" #: lib/poptQV.c:184 #, c-format msgid "skip %%ghost files" msgstr "略過 %%ghost 檔案" #: lib/poptQV.c:191 msgid "display the states of the listed files" msgstr "顯示列出的每個檔案的狀態" #: lib/poptQV.c:209 msgid "don't verify size of files" msgstr "不校驗檔案大小" #: lib/poptQV.c:212 msgid "don't verify symlink path of files" msgstr "不校驗檔案的連結路徑" #: lib/poptQV.c:215 msgid "don't verify owner of files" msgstr "不校驗檔案的擁有者" #: lib/poptQV.c:218 msgid "don't verify group of files" msgstr "不校驗檔案的屬組" #: lib/poptQV.c:221 msgid "don't verify modification time of files" msgstr "不校驗檔案的修改時間" #: lib/poptQV.c:224 lib/poptQV.c:227 msgid "don't verify mode of files" msgstr "不校驗檔案的模式" #: lib/poptQV.c:230 #, fuzzy msgid "don't verify capabilities of files" msgstr "不校驗檔案大小" #: lib/poptQV.c:233 msgid "don't verify file security contexts" msgstr "不校驗檔案的安全關聯" #: lib/poptQV.c:235 msgid "don't verify files in package" msgstr "不校驗套件內的檔案" #: lib/poptQV.c:237 tools/rpmgraph.c:218 msgid "don't verify package dependencies" msgstr "不校驗套件的相依關係" #: lib/poptQV.c:240 lib/poptQV.c:243 msgid "don't execute verify script(s)" msgstr "不執行校驗命令稿" #: lib/psm.c:212 #, fuzzy, c-format msgid "Missing rpmlib features for %s:\n" msgstr "缺少 %s 架構於 %s:%d\n" #: lib/psm.c:254 msgid "source package expected, binary found\n" msgstr "需要一個原始碼套件，但這是一個二進位套件\n" #: lib/psm.c:307 msgid "source package contains no .spec file\n" msgstr "原始碼套件內沒有 .spec 檔案\n" #: lib/psm.c:848 #, c-format msgid "unpacking of archive failed%s%s: %s\n" msgstr "解壓保存檔案失敗 %s%s：%s\n" #: lib/psm.c:849 msgid " on file " msgstr " 於檔案 " #: lib/psm.c:967 #, c-format msgid "%s failed on file %s: %s\n" msgstr "%s 失敗的於檔案 %s: %s\n" #: lib/psm.c:970 #, c-format msgid "%s failed: %s\n" msgstr "%s 失敗：%s\n" #: lib/query.c:115 #, c-format msgid "incorrect format: %s\n" msgstr "不正確的格式：%s\n" #: lib/query.c:127 #, fuzzy msgid "(contains no files)\n" msgstr "(沒有包含檔案)" #: lib/query.c:160 msgid "normal " msgstr "正常 " #: lib/query.c:163 msgid "replaced " msgstr "被替換 " #: lib/query.c:166 msgid "not installed " msgstr "未安裝 " #: lib/query.c:169 msgid "net shared " msgstr "網路共享 " #: lib/query.c:172 msgid "wrong color " msgstr "錯誤顏色 " #: lib/query.c:175 msgid "(no state) " msgstr "(無狀態) " #: lib/query.c:178 #, c-format msgid "(unknown %3d) " msgstr "(不明的 %3d) " #: lib/query.c:198 msgid "package has not file owner/group lists\n" msgstr "套件內沒有檔案擁有者/群組記錄\n" #: lib/query.c:229 msgid "package has neither file owner or id lists\n" msgstr "套件內沒有檔案擁有者與 ID 記錄\n" #: lib/query.c:319 #, c-format msgid "group %s does not contain any packages\n" msgstr "群組 %s 內還沒有任何套件\n" #: lib/query.c:326 #, c-format msgid "no package triggers %s\n" msgstr "沒有套件內建觸發器 %s\n" #: lib/query.c:337 lib/query.c:356 lib/query.c:372 #, c-format msgid "malformed %s: %s\n" msgstr "異常的 %s：%s\n" #: lib/query.c:347 lib/query.c:362 lib/query.c:377 #, c-format msgid "no package matches %s: %s\n" msgstr "沒有套件匹配：%s：%s\n" #: lib/query.c:385 #, c-format msgid "no package requires %s\n" msgstr "沒有套件需要 %s\n" #: lib/query.c:394 #, c-format msgid "no package provides %s\n" msgstr "沒有套件提供 %s\n" #: lib/query.c:424 #, c-format msgid "file %s: %s\n" msgstr "檔案 %s：%s\n" #: lib/query.c:427 #, c-format msgid "file %s is not owned by any package\n" msgstr "檔案 %s 不屬於任何套件\n" #: lib/query.c:438 #, c-format msgid "invalid package number: %s\n" msgstr "不正確的套件編號：%s\n" #: lib/query.c:445 #, fuzzy, c-format msgid "record %u could not be read\n" msgstr "記錄 %u 無法讀取\n" #: lib/query.c:458 lib/rpminstall.c:662 #, c-format msgid "package %s is not installed\n" msgstr "套件 %s 尚未安裝\n" #: lib/query.c:492 #, c-format msgid "unknown tag: \"%s\"\n" msgstr "不明的標記：「%s」\n" #: lib/rpmchecksig.c:43 #, fuzzy, c-format msgid "%s: key %d import failed.\n" msgstr "%s：匯入失敗。\n" #: lib/rpmchecksig.c:47 #, fuzzy, c-format msgid "%s: key %d not an armored public key.\n" msgstr "%s：不是一個受保護的公鑰。\n" #: lib/rpmchecksig.c:91 #, c-format msgid "%s: import read failed(%d).\n" msgstr "%s：匯入讀取時失敗(%d)。\n" #: lib/rpmchecksig.c:116 #, c-format msgid "%s: headerRead failed\n" msgstr "%s：headerRead 失敗\n" #: lib/rpmchecksig.c:125 #, c-format msgid "%s: Immutable header region could not be read. Corrupted package?\n" msgstr "" #: lib/rpmchecksig.c:159 #, c-format msgid "skipping package %s with unverifiable V%u signature\n" msgstr "" #: lib/rpmchecksig.c:410 msgid "NOT OK" msgstr "不正確" #: lib/rpmchecksig.c:410 msgid "OK" msgstr "正確" #: lib/rpmchecksig.c:412 msgid " (MISSING KEYS:" msgstr " (丟失的密鑰：" #: lib/rpmchecksig.c:414 msgid ") " msgstr ") " #: lib/rpmchecksig.c:415 msgid " (UNTRUSTED KEYS:" msgstr " (不信任的密鑰：" #: lib/rpmchecksig.c:417 msgid ")" msgstr ")" #: lib/rpmchecksig.c:457 sign/rpmgensig.c:54 #, c-format msgid "%s: open failed: %s\n" msgstr "%s：開啟失敗：%s\n" #: lib/rpmchroot.c:43 #, fuzzy, c-format msgid "Unable to open current directory: %m\n" msgstr "移除目錄時失敗 %s: %s\n" #: lib/rpmchroot.c:59 lib/rpmchroot.c:84 #, fuzzy, c-format msgid "%s: chroot directory not set\n" msgstr "%s 移除目錄 %s 失敗：目錄非空\n" #: lib/rpmchroot.c:70 #, fuzzy, c-format msgid "Unable to change root directory: %m\n" msgstr "移除目錄時失敗 %s: %s\n" #: lib/rpmchroot.c:95 #, fuzzy, c-format msgid "Unable to restore root directory: %m\n" msgstr "移除目錄時失敗 %s: %s\n" #: lib/rpmds.c:403 msgid "NO " msgstr "否 " #: lib/rpmds.c:403 msgid "YES" msgstr "是" #: lib/rpmds.c:861 msgid "PreReq:, Provides:, and Obsoletes: dependencies support versions." msgstr "PreReq:、Provides:、以及 Obsoletes: 相依支援版本。" #: lib/rpmds.c:864 msgid "file name(s) stored as (dirName,baseName,dirIndex) tuple, not as path." msgstr "檔案名稱儲存為 (dirName、baseName、dirIndex) 字組，而非路徑。" #: lib/rpmds.c:868 msgid "package payload can be compressed using bzip2." msgstr "套件酬載可以使用 bzip2 壓縮。" #: lib/rpmds.c:873 #, fuzzy msgid "package payload can be compressed using xz." msgstr "套件酬載可以使用 bzip2 壓縮。" #: lib/rpmds.c:876 #, fuzzy msgid "package payload can be compressed using lzma." msgstr "套件酬載可以使用 bzip2 壓縮。" #: lib/rpmds.c:880 msgid "package payload file(s) have \"./\" prefix." msgstr "套件酬載檔案有\"./\"字首。" #: lib/rpmds.c:883 msgid "package name-version-release is not implicitly provided." msgstr "套件的名稱-版本-發行編號沒有被隱含指出。" #: lib/rpmds.c:886 msgid "header tags are always sorted after being loaded." msgstr "表頭標記總在載入之後自動排序。" #: lib/rpmds.c:889 msgid "the scriptlet interpreter can use arguments from header." msgstr "命令稿解譯器可以從表頭中呼叫引數。" #: lib/rpmds.c:892 msgid "a hardlink file set may be installed without being complete." msgstr "硬式鏈結檔案組合也許沒有被完整安裝。" #: lib/rpmds.c:895 msgid "package scriptlets may access the rpm database while installing." msgstr "套件內建短命令稿在安裝程序中可以存取 rpm 資料庫。" #: lib/rpmds.c:899 msgid "internal support for lua scripts." msgstr "內部支援 lua 命令稿。" #: lib/rpmds.c:903 msgid "file digest algorithm is per package configurable" msgstr "" #: lib/rpmds.c:907 msgid "support for POSIX.1e file capabilities" msgstr "" #: lib/rpmds.c:911 #, fuzzy msgid "package scriptlets can be expanded at install time." msgstr "套件內建短命令稿在安裝程序中可以存取 rpm 資料庫。" #: lib/rpmgi.c:49 lib/rpminstall.c:115 lib/rpminstall.c:292 #: lib/rpminstall.c:323 tools/rpmgraph.c:93 tools/rpmgraph.c:130 #, c-format msgid "open of %s failed: %s\n" msgstr "開啟 %s 失敗：%s\n" #: lib/rpmgi.c:136 #, fuzzy, c-format msgid "%s: not an rpm package (or package manifest)\n" msgstr "%s: 不是 rpm 套件(或套件清單)：%s\n" #: lib/rpminstall.c:174 msgid "Preparing..." msgstr "正在準備…" #: lib/rpminstall.c:176 msgid "Preparing packages for installation..." msgstr "正在準備要安裝的套件…" #: lib/rpminstall.c:254 tools/rpmgraph.c:168 msgid "Failed dependencies:\n" msgstr "相依性偵測失敗：\n" #: lib/rpminstall.c:305 #, c-format msgid "%s: not an rpm package (or package manifest): %s\n" msgstr "%s: 不是 rpm 套件(或套件清單)：%s\n" #: lib/rpminstall.c:345 lib/rpminstall.c:724 tools/rpmgraph.c:113 #, c-format msgid "%s cannot be installed\n" msgstr "%s 無法安裝\n" #: lib/rpminstall.c:457 #, c-format msgid "Retrieving %s\n" msgstr "取回中 %s\n" #: lib/rpminstall.c:469 #, fuzzy, c-format msgid "skipping %s - transfer failed\n" msgstr "略過 %s - 傳輸失敗 - %s\n" #: lib/rpminstall.c:536 #, c-format msgid "package %s is not relocatable\n" msgstr "套件 %s 不能重新部署\n" #: lib/rpminstall.c:563 #, c-format msgid "error reading from file %s\n" msgstr "讀取檔案 %s 時發生錯誤\n" #: lib/rpminstall.c:569 #, c-format msgid "file %s requires a newer version of RPM\n" msgstr "檔案 %s 需要更新版本的 RPM\n" #: lib/rpminstall.c:669 #, fuzzy, c-format msgid "\"%s\" specifies multiple packages:\n" msgstr "「%s」指定了多個套件\n" #: lib/rpminstall.c:708 #, c-format msgid "cannot open %s: %s\n" msgstr "無法開啟檔案 %s：%s\n" #: lib/rpminstall.c:714 #, c-format msgid "Installing %s\n" msgstr "正在安裝 %s\n" #: lib/rpmlead.c:101 #, fuzzy msgid "not an rpm package" msgstr "%s：不是一個 rpm 套件\n" #: lib/rpmlead.c:105 #, fuzzy msgid "illegal signature type" msgstr "%s：未發現簽名\n" #: lib/rpmlead.c:109 msgid "unsupported RPM package version" msgstr "" #: lib/rpmlead.c:122 #, c-format msgid "read failed: %s (%d)\n" msgstr "讀取失敗：%s (%d)\n" #: lib/rpmlead.c:126 #, fuzzy msgid "not an rpm package\n" msgstr "%s：不是一個 rpm 套件\n" #: lib/rpmlock.c:102 lib/rpmlock.c:109 #, fuzzy, c-format msgid "can't create %s lock on %s (%s)\n" msgstr "建立異動作業集" #: lib/rpmlock.c:106 #, fuzzy, c-format msgid "waiting for %s lock on %s\n" msgstr "產生異動作業記錄板(%p, %p)\n" #: lib/rpmplugins.c:60 #, fuzzy, c-format msgid "Failed to dlopen %s %s\n" msgstr "開啟 %s 失敗：%s\n" #: lib/rpmplugins.c:67 #, fuzzy, c-format msgid "Failed to resolve symbol %s: %s\n" msgstr "無法將 %s 更名為 %s：%m\n" #: lib/rpmplugins.c:88 #, c-format msgid "Failed to expand %%__collection_%s macro\n" msgstr "" #: lib/rpmplugins.c:137 lib/rpmplugins.c:142 #, c-format msgid "Plugin %s not loaded\n" msgstr "" #: lib/rpmplugins.c:150 #, fuzzy, c-format msgid "Failed to resolve %s plugin symbol %s: %s\n" msgstr "無法將 %s 更名為 %s：%m\n" #: lib/rpmprob.c:109 msgid "different" msgstr "不同的" #: lib/rpmprob.c:115 #, c-format msgid "package %s is intended for a %s architecture" msgstr "套件 %s 是適用於 %s 架構的" #: lib/rpmprob.c:120 #, c-format msgid "package %s is intended for a %s operating system" msgstr "套件 %s 是適用於 %s 作業系統的" #: lib/rpmprob.c:124 #, c-format msgid "package %s is already installed" msgstr "套件 %s 已經安裝了" #: lib/rpmprob.c:128 #, c-format msgid "path %s in package %s is not relocatable" msgstr "在套件 %2$s 中的路徑 %1$s 無法重新部署" #: lib/rpmprob.c:133 #, c-format msgid "file %s conflicts between attempted installs of %s and %s" msgstr "在試圖安裝的 %s 和 %s 之間產生檔案 %s 的衝突" #: lib/rpmprob.c:138 #, c-format msgid "file %s from install of %s conflicts with file from package %s" msgstr "從 %s 安裝的檔案 %s 與來自套件 %s 的檔案產生衝突" #: lib/rpmprob.c:143 #, c-format msgid "package %s (which is newer than %s) is already installed" msgstr "套件 %s (較 %s 版本還新) 已經安裝了" #: lib/rpmprob.c:148 #, fuzzy, c-format msgid "installing package %s needs %%cB on the %s filesystem" msgstr "安裝套件 %s 時需要 %%cB 空間於檔案系統 %s 上" #: lib/rpmprob.c:158 #, fuzzy, c-format msgid "installing package %s needs % inodes on the %s filesystem" msgstr "安裝套件 %s 時需要 % 個節點於檔案系統 %s 上" #: lib/rpmprob.c:162 #, c-format msgid "%s is needed by %s%s" msgstr "%s 被 %s%s 所需要" #: lib/rpmprob.c:164 lib/rpmprob.c:169 lib/rpmprob.c:174 msgid "(installed) " msgstr "(已安裝) " #: lib/rpmprob.c:167 #, c-format msgid "%s conflicts with %s%s" msgstr "%s 與 %s%s 衝突" #: lib/rpmprob.c:172 #, fuzzy, c-format msgid "%s is obsoleted by %s%s" msgstr "%s 被 %s%s 所需要" #: lib/rpmprob.c:178 #, c-format msgid "unknown error %d encountered while manipulating package %s" msgstr "不明錯誤 %d 發生在處理套件 %s 的程序中" #: lib/rpmrc.c:186 #, c-format msgid "missing second ':' at %s:%d\n" msgstr "在 %s:%d 處漏失了第二個「:」\n" #: lib/rpmrc.c:189 #, c-format msgid "missing architecture name at %s:%d\n" msgstr "在 %s:%d 處漏失了架構名稱\n" #: lib/rpmrc.c:334 #, c-format msgid "Incomplete data line at %s:%d\n" msgstr "不完整資料列位於 %s:%d\n" #: lib/rpmrc.c:339 #, c-format msgid "Too many args in data line at %s:%d\n" msgstr "在資料列的 %s:%d 中有太多引數\n" #: lib/rpmrc.c:346 #, c-format msgid "Bad arch/os number: %s (%s:%d)\n" msgstr "損壞的架構/作業系統序號：%s (%s:%d)\n" #: lib/rpmrc.c:377 #, c-format msgid "Incomplete default line at %s:%d\n" msgstr "不完整預設列位於 %s:%d\n" #: lib/rpmrc.c:382 #, c-format msgid "Too many args in default line at %s:%d\n" msgstr "在預設列的 %s:%d 中有太多引數\n" #: lib/rpmrc.c:486 #, c-format msgid "missing ':' (found 0x%02x) at %s:%d\n" msgstr "缺少 ':' (找到 0x%02x) 於 %s:%d\n" #: lib/rpmrc.c:503 lib/rpmrc.c:543 #, c-format msgid "missing argument for %s at %s:%d\n" msgstr "%s 缺少引數於 %s:%d\n" #: lib/rpmrc.c:519 #, fuzzy, c-format msgid "cannot open %s at %s:%d: %m\n" msgstr "無法開啟 %s 於 %s:%d: %s\n" #: lib/rpmrc.c:535 #, c-format msgid "missing architecture for %s at %s:%d\n" msgstr "缺少 %s 架構於 %s:%d\n" #: lib/rpmrc.c:602 #, c-format msgid "bad option '%s' at %s:%d\n" msgstr "不當的選項 '%s' 於 %s:%d\n" #: lib/rpmrc.c:1372 #, c-format msgid "Unknown system: %s\n" msgstr "不明的系統：%s\n" #: lib/rpmrc.c:1373 #, c-format msgid "Please contact %s\n" msgstr "" #: lib/rpmrc.c:1592 #, fuzzy, c-format msgid "Unable to open %s for reading: %m.\n" msgstr "無法開啟 %s 以讀取：%s\n" #: lib/rpmscript.c:69 #, fuzzy, c-format msgid "Unable to restore current directory: %m" msgstr "移除目錄時失敗 %s: %s\n" #: lib/rpmscript.c:79 msgid " scriptlet support not built in\n" msgstr "" #: lib/rpmscript.c:217 #, fuzzy, c-format msgid "Couldn't create temporary file for %s: %s\n" msgstr "無法開啟 %s：%s\n" #: lib/rpmscript.c:244 #, fuzzy, c-format msgid "Couldn't duplicate file descriptor: %s: %s\n" msgstr "無法開啟 %s：%s\n" #: lib/rpmscript.c:267 #, fuzzy, c-format msgid "%s scriptlet failed, waitpid(%d) rc %d: %s\n" msgstr "%s(%s-%s-%s.%s) 短命令稿執行失敗，waitpid(%d) rc %d: %s\n" #: lib/rpmscript.c:271 #, fuzzy, c-format msgid "%s scriptlet failed, signal %d\n" msgstr "%s(%s-%s-%s.%s) 短命令稿執行失敗，離開狀態 %d\n" #: lib/rpmscript.c:274 #, fuzzy, c-format msgid "%s scriptlet failed, exit status %d\n" msgstr "%s(%s-%s-%s.%s) 短命令稿執行失敗，離開狀態 %d\n" #: lib/rpmtd.c:254 #, fuzzy msgid "Unknown format" msgstr "不明的標記" #: lib/rpmte.c:820 #, fuzzy msgid "install" msgstr "(已安裝) " #: lib/rpmte.c:821 msgid "erase" msgstr "" #: lib/rpmts.c:92 #, c-format msgid "cannot open Packages database in %s\n" msgstr "無法開啟套件資料庫 %s\n" #: lib/rpmts.c:193 #, c-format msgid "extra '(' in package label: %s\n" msgstr "額外的「(」存在於套件標籤中：%s\n" #: lib/rpmts.c:211 #, c-format msgid "missing '(' in package label: %s\n" msgstr "丟失的「(」存在於套件標籤中：%s\n" #: lib/rpmts.c:219 #, c-format msgid "missing ')' in package label: %s\n" msgstr "丟失的「)」存在於套件標籤中：%s\n" #: lib/rpmts.c:290 #, fuzzy, c-format msgid "%s: reading of public key failed.\n" msgstr "%s：公鑰讀入失敗。\n" #: lib/rpmts.c:1034 #, fuzzy msgid "transaction" msgstr "建立異動作業集" #: lib/signature.c:90 #, c-format msgid "sigh size(%d): BAD, read returned %d\n" msgstr "sigh 大小(%d):不當，讀取回傳 %d\n" #: lib/signature.c:95 msgid "sigh magic: BAD\n" msgstr "sigh magic：不當\n" #: lib/signature.c:101 #, c-format msgid "sigh tags: BAD, no. of tags(%d) out of range\n" msgstr "sigh 標記：不當，號碼的標記(%d)發信匣的範圍\n" #: lib/signature.c:107 #, c-format msgid "sigh data: BAD, no. of bytes(%d) out of range\n" msgstr "sigh 資料：不當，號碼的 位元組(%d)發信匣的範圍\n" #: lib/signature.c:122 #, c-format msgid "sigh blob(%d): BAD, read returned %d\n" msgstr "sigh 萬用字元解析(%d):不當，讀取回傳 %d\n" #: lib/signature.c:188 #, c-format msgid "sigh tag[%d]: BAD, tag %d type %d offset %d count %d\n" msgstr "sigh 標記[%d]:不當，標記 %d 型態 %d 偏移 %d 計數 %d\n" #: lib/signature.c:198 msgid "sigh load: BAD\n" msgstr "sigh 載入：不當\n" #: lib/signature.c:211 #, fuzzy, c-format msgid "sigh pad(%zd): BAD, read %zd bytes\n" msgstr "sigh 填充(%d):不當，讀取 %d 位元組\n" #: lib/signature.c:227 #, fuzzy, c-format msgid "sigh sigSize(%zd): BAD, fstat(2) failed\n" msgstr "sigh sigSize(%d):不當，fstat(2)失敗\n" #: lib/signature.c:303 msgid "Immutable header region could not be read. Corrupted package?\n" msgstr "" #: lib/signature.c:397 #, fuzzy msgid "MD5 digest:" msgstr "MD 5 摘要：" #: lib/signature.c:436 #, fuzzy msgid "Header SHA1 digest:" msgstr "表頭 SHA1 摘要：" #: lib/signature.c:489 msgid "Header " msgstr "表頭 " #: lib/signature.c:502 msgid "Verify signature: BAD PARAMETERS\n" msgstr "驗證簽名：不當的參數\n" #: lib/signature.c:523 #, c-format msgid "Signature: UNKNOWN (%d)\n" msgstr "簽名：不明 (%d)\n" #: lib/transaction.c:1388 msgid "skipped" msgstr "" #: lib/transaction.c:1388 #, fuzzy msgid "failed" msgstr "%s 失敗：%s\n" #: lib/verify.c:378 #, c-format msgid "missing %c %s" msgstr "缺少 %c %s" #: lib/verify.c:428 #, fuzzy, c-format msgid "Unsatisfied dependencies for %s:\n" msgstr "無法滿足 %s 的相依性：" #: lib/headerfmt.c:342 msgid "missing { after %" msgstr "% 之後缺少 {" #: lib/headerfmt.c:364 msgid "missing } after %{" msgstr "%{ 之後缺少 }" #: lib/headerfmt.c:375 msgid "empty tag format" msgstr "清空標記格式" #: lib/headerfmt.c:386 msgid "empty tag name" msgstr "清空標記名稱" #: lib/headerfmt.c:393 msgid "unknown tag" msgstr "不明的標記" #: lib/headerfmt.c:413 msgid "] expected at end of array" msgstr "] 預期在陣列的結束" #: lib/headerfmt.c:425 msgid "unexpected ]" msgstr "未預期的 ]" #: lib/headerfmt.c:435 msgid "unexpected }" msgstr "未預期的 }" #: lib/headerfmt.c:491 msgid "? expected in expression" msgstr "? 預期於運算式中" #: lib/headerfmt.c:498 msgid "{ expected after ? in expression" msgstr "{ 預期於運算式中 ? 之後" #: lib/headerfmt.c:510 lib/headerfmt.c:550 msgid "} expected in expression" msgstr "} 預期於運算式中" #: lib/headerfmt.c:518 msgid ": expected following ? subexpression" msgstr "： 預期跟著子運算式" #: lib/headerfmt.c:536 msgid "{ expected after : in expression" msgstr "{ 預期於運算式中 : 之後" #: lib/headerfmt.c:558 msgid "| expected at end of expression" msgstr "| 預期於運算式的結束" #: lib/headerfmt.c:727 msgid "array iterator used with different sized arrays" msgstr "用於不同大小陣列的陣列迭代器" #: lib/rpmdb.c:85 #, c-format msgid "Generating %d missing index(es), please wait...\n" msgstr "" #: lib/rpmdb.c:154 #, c-format msgid "cannot open %s index using db%d - %s (%d)\n" msgstr "無法使用資料庫 %2$d- %3$s(%4$d) 開啟 %1$s 索引\n" #: lib/rpmdb.c:687 msgid "no dbpath has been set\n" msgstr "沒有 dbpath 已被設定\n" #: lib/rpmdb.c:869 lib/rpmdb.c:986 lib/rpmdb.c:1031 lib/rpmdb.c:1884 #: lib/rpmdb.c:2037 lib/rpmdb.c:2071 lib/rpmdb.c:2632 #, c-format msgid "error(%d) getting \"%s\" records from %s index\n" msgstr "從 %3$s 索引取得 \"%2$s\" 記錄時產生錯誤(%1$d)\n" #: lib/rpmdb.c:1218 msgid "miFreeHeader: skipping" msgstr "miFreeHeader：跳過" #: lib/rpmdb.c:1228 #, c-format msgid "error(%d) storing record #%d into %s\n" msgstr "儲存記錄 #%2$d 進入 %3$s 時產生錯誤(%1$d)\n" #: lib/rpmdb.c:1325 #, fuzzy, c-format msgid "%s: regexec failed: %s\n" msgstr "%s：檢索失敗：%s\n" #: lib/rpmdb.c:1506 #, fuzzy, c-format msgid "%s: regcomp failed: %s\n" msgstr "%s：開啟失敗：%s\n" #: lib/rpmdb.c:1666 msgid "rpmdbNextIterator: skipping" msgstr "rpmdbNextIterator：跳過" #: lib/rpmdb.c:1807 #, c-format msgid "rpmdb: damaged header #%u retrieved -- skipping.\n" msgstr "rpmdb：已取回損壞的表頭 #%u -- 跳過。\n" #: lib/rpmdb.c:2228 #, fuzzy, c-format msgid "error(%d:%s) getting next key from %s index\n" msgstr "從 %3$s 索引取得 \"%2$s\" 記錄時產生錯誤(%1$d)\n" #: lib/rpmdb.c:2334 #, fuzzy, c-format msgid "error(%d) adding header #%d record\n" msgstr "設定用於 %3$s 撤除的表頭 #%2$d 記錄時產生錯誤(%1$d)\n" #: lib/rpmdb.c:2343 #, fuzzy, c-format msgid "error(%d) removing header #%d record\n" msgstr "設定用於 %3$s 撤除的表頭 #%2$d 記錄時產生錯誤(%1$d)\n" #: lib/rpmdb.c:2367 #, c-format msgid "%s: cannot read header at 0x%x\n" msgstr "%s: 無法讀取在 0x%x 的表頭\n" #: lib/rpmdb.c:2434 #, c-format msgid "error(%d) setting \"%s\" records from %s index\n" msgstr "從 %3$s 索引設定 \"%2$s\" 記錄時產生錯誤(%1$d)\n" #: lib/rpmdb.c:2453 #, c-format msgid "error(%d) storing record \"%s\" into %s\n" msgstr "儲存記錄 \"%2$s\" 進入 %3$s 時產生錯誤(%1$d)\n" #: lib/rpmdb.c:2463 #, c-format msgid "error(%d) removing record \"%s\" from %s\n" msgstr "從 %3$s 移除記錄 \"%2$s\" 時產生錯誤(%1$d)\n" #: lib/rpmdb.c:2539 #, c-format msgid "error(%d) allocating new package instance\n" msgstr "配置新套件實體時產生錯誤(%d)\n" #: lib/rpmdb.c:2648 #, c-format msgid "error(%d) storing record %s into %s\n" msgstr "儲存記錄 %2$s 於 %3$s 時產生錯誤(%1$d)\n" #: lib/rpmdb.c:2845 msgid "no dbpath has been set" msgstr "沒有 dbpath 已被設定" #: lib/rpmdb.c:2863 #, fuzzy, c-format msgid "failed to create directory %s: %s\n" msgstr "移除目錄時失敗 %s: %s\n" #: lib/rpmdb.c:2897 #, c-format msgid "header #%u in the database is bad -- skipping.\n" msgstr "在資料庫中有不當的表頭 #%u -- 跳過。\n" #: lib/rpmdb.c:2911 #, c-format msgid "cannot add record originally at %u\n" msgstr "無法加入原本在 %u 的記錄\n" #: lib/rpmdb.c:2926 msgid "failed to rebuild database: original database remains in place\n" msgstr "重建資料庫時失敗：原來的資料庫保持原狀\n" #: lib/rpmdb.c:2934 msgid "failed to replace old database with new database!\n" msgstr "以新的資料庫取代舊的資料庫時失敗！\n" #: lib/rpmdb.c:2936 #, c-format msgid "replace files in %s with files from %s to recover" msgstr "以 %2$s 的檔案取代 %1$s 中的檔案來回復" #: lib/rpmdb.c:2947 #, c-format msgid "failed to remove directory %s: %s\n" msgstr "移除目錄時失敗 %s: %s\n" #: lib/backend/db3.c:28 #, c-format msgid "db%d error(%d) from %s: %s\n" msgstr "資料庫%d 錯誤(%d) 來自 %s: %s\n" #: lib/backend/db3.c:31 #, c-format msgid "db%d error(%d): %s\n" msgstr "資料庫%d 錯誤(%d): %s\n" #: lib/backend/db3.c:508 #, c-format msgid "cannot get %s lock on %s/%s\n" msgstr "無法取得 %s 鎖定於 %s/%s\n" #: lib/backend/db3.c:510 msgid "shared" msgstr "共享" #: lib/backend/db3.c:510 msgid "exclusive" msgstr "互斥" #: lib/backend/db3.c:590 #, fuzzy, c-format msgid "invalid index type %x on %s/%s\n" msgstr "已驗證資料庫索引 %s/%s\n" #: lib/backend/dbconfig.c:144 #, c-format msgid "unrecognized db option: \"%s\" ignored.\n" msgstr "無法辨識的資料庫選項：\"%s\" 忽略。\n" #: lib/backend/dbconfig.c:181 #, c-format msgid "%s has invalid numeric value, skipped\n" msgstr "%s 有無效的數值，略過\n" #: lib/backend/dbconfig.c:190 #, c-format msgid "%s has too large or too small long value, skipped\n" msgstr "%s 有太大或太小的長整數值，略過\n" #: lib/backend/dbconfig.c:199 #, c-format msgid "%s has too large or too small integer value, skipped\n" msgstr "%s 有太大或太小的整數值，略過\n" #: plugins/sepolicy.c:220 #, fuzzy, c-format msgid "Failed to decode policy for %s\n" msgstr "無法從 %s 讀取規格檔案\n" #: plugins/sepolicy.c:227 #, fuzzy, c-format msgid "Failed to create temporary file for %s: %s\n" msgstr "無法開啟 %s：%s\n" #: plugins/sepolicy.c:233 #, fuzzy, c-format msgid "Failed to write %s policy to file %s\n" msgstr "無法從 %s 讀取規格檔案\n" #: plugins/sepolicy.c:305 #, fuzzy msgid "Failed to create semanage handle\n" msgstr "建立 %s 時失敗: %s\n" #: plugins/sepolicy.c:311 #, fuzzy msgid "Failed to connect to policy handler\n" msgstr "連接到伺服器時失敗" #: plugins/sepolicy.c:315 #, fuzzy, c-format msgid "Failed to begin policy transaction: %s\n" msgstr "開啟 %s 失敗：%s\n" #: plugins/sepolicy.c:346 #, fuzzy, c-format msgid "Failed to remove temporary policy file %s: %s\n" msgstr "移除目錄時失敗 %s: %s\n" #: plugins/sepolicy.c:394 #, fuzzy, c-format msgid "Failed to install policy module: %s (%s)\n" msgstr "無法將 %s 更名為 %s：%m\n" #: plugins/sepolicy.c:424 #, fuzzy, c-format msgid "Failed to remove policy module: %s\n" msgstr "讀取 %s 失敗: %s。\n" #: plugins/sepolicy.c:448 plugins/sepolicy.c:500 #, fuzzy, c-format msgid "Failed to fork process: %s\n" msgstr "開啟 %s 失敗：%s\n" #: plugins/sepolicy.c:458 plugins/sepolicy.c:510 #, fuzzy, c-format msgid "Failed to execute %s: %s\n" msgstr "建立 %s 時失敗: %s\n" #: plugins/sepolicy.c:464 plugins/sepolicy.c:516 #, fuzzy, c-format msgid "%s terminated abnormally\n" msgstr "巨集 %%%s 具有未終結的主體\n" #: plugins/sepolicy.c:468 plugins/sepolicy.c:520 #, fuzzy, c-format msgid "%s failed with exit code %i\n" msgstr "巨集 %%%s 展開時失敗\n" #: plugins/sepolicy.c:475 msgid "Failed to commit policy changes\n" msgstr "" #: plugins/sepolicy.c:492 msgid "Failed to expand restorecon path" msgstr "" #: plugins/sepolicy.c:571 msgid "Failed to relabel filesystem. Files may be mislabeled\n" msgstr "" #: plugins/sepolicy.c:575 msgid "Failed to reload file contexts. Files may be mislabeled\n" msgstr "" #: plugins/sepolicy.c:602 #, fuzzy, c-format msgid "Failed to extract policy from %s\n" msgstr "無法從 %s 讀取規格檔案\n" #: python/rpmts-py.c:166 #, c-format msgid "error: python callback %s failed, aborting!\n" msgstr "" #: rpmio/macro.c:185 #, c-format msgid "======================== active %d empty %d\n" msgstr "======================== 作用中 %d 清空 %d\n" #: rpmio/macro.c:323 #, c-format msgid "%3d>%*s(empty)" msgstr "%3d>%*s(清空)" #: rpmio/macro.c:364 #, c-format msgid "%3d<%*s(empty)\n" msgstr "%3d<%*s(清空)\n" #: rpmio/macro.c:536 rpmio/macro.c:574 #, c-format msgid "Macro %%%s has unterminated body\n" msgstr "巨集 %%%s 具有未終結的主體\n" #: rpmio/macro.c:593 #, c-format msgid "Macro %%%s has illegal name (%%define)\n" msgstr "巨集 %%%s 具有不合法的名稱 (%%define)\n" #: rpmio/macro.c:599 #, c-format msgid "Macro %%%s has unterminated opts\n" msgstr "巨集 %%%s 具有未終結的選項\n" #: rpmio/macro.c:604 #, c-format msgid "Macro %%%s has empty body\n" msgstr "巨集 %%%s 具有清空的主體\n" #: rpmio/macro.c:610 #, c-format msgid "Macro %%%s failed to expand\n" msgstr "巨集 %%%s 展開時失敗\n" #: rpmio/macro.c:648 #, c-format msgid "Macro %%%s has illegal name (%%undefine)\n" msgstr "巨集 %%%s 具有不合法的名稱 (%%undefine)\n" #: rpmio/macro.c:737 #, c-format msgid "Macro %%%s (%s) was not used below level %d\n" msgstr "巨集 %%%s (%s) 在等級 %d 之下未被使用\n" #: rpmio/macro.c:819 #, c-format msgid "Unknown option %c in %s(%s)\n" msgstr "在 %2$s(%3$s) 中有不明的選項 %1$c\n" #: rpmio/macro.c:1042 msgid "" "Too many levels of recursion in macro expansion. It is likely caused by " "recursive macro declaration.\n" msgstr "" #: rpmio/macro.c:1111 rpmio/macro.c:1128 #, c-format msgid "Unterminated %c: %s\n" msgstr "未終結的 %c: %s\n" #: rpmio/macro.c:1169 #, c-format msgid "A %% is followed by an unparseable macro\n" msgstr "在無法解析的巨集之後跟著一個 %%\n" #: rpmio/rpmfileutil.c:277 #, fuzzy, c-format msgid "error creating temporary file %s: %m\n" msgstr "建立暫時檔案 %s 時發生錯誤\n" #: rpmio/rpmfileutil.c:342 rpmio/rpmfileutil.c:348 #, c-format msgid "File %s: %s\n" msgstr "檔案 %s: %s\n" #: rpmio/rpmfileutil.c:351 #, c-format msgid "File %s is smaller than %u bytes\n" msgstr "檔案 %s 小於 %u 位元組\n" #: rpmio/rpmfileutil.c:755 #, fuzzy msgid "failed to create directory" msgstr "移除目錄時失敗 %s: %s\n" #: rpmio/rpmlua.c:480 #, fuzzy, c-format msgid "invalid syntax in lua scriptlet: %s\n" msgstr "不支援舊語法：%s\n" #: rpmio/rpmlua.c:496 #, fuzzy, c-format msgid "invalid syntax in lua script: %s\n" msgstr "不支援舊語法：%s\n" #: rpmio/rpmlua.c:501 rpmio/rpmlua.c:520 #, fuzzy, c-format msgid "lua script failed: %s\n" msgstr "%s: Fwrite 失敗：%s\n" #: rpmio/rpmlua.c:515 #, fuzzy, c-format msgid "invalid syntax in lua file: %s\n" msgstr "不正確的套件編號：%s\n" #: rpmio/rpmlua.c:683 #, fuzzy, c-format msgid "lua hook failed: %s\n" msgstr "%s：檢索失敗：%s\n" #: rpmio/rpmlog.c:37 msgid "(no error)" msgstr "(無錯誤)" #: rpmio/rpmlog.c:148 rpmio/rpmlog.c:149 rpmio/rpmlog.c:150 msgid "fatal error: " msgstr "嚴重錯誤：" #: rpmio/rpmlog.c:151 msgid "error: " msgstr "錯誤：" #: rpmio/rpmlog.c:152 msgid "warning: " msgstr "警告：" #: rpmio/rpmmalloc.c:25 #, c-format msgid "memory alloc (%u bytes) returned NULL.\n" msgstr "記憶體配置 (%u 位元組) 回傳空值。\n" #: rpmio/rpmpgp.c:1361 #, fuzzy, c-format msgid "V%d %s/%s %s, key ID %s" msgstr " DSA 簽名：" #: rpmio/rpmpgp.c:1369 #, fuzzy msgid "(none)" msgstr "(無錯誤)" #: rpmio/rpmpgp.c:1652 #, fuzzy, c-format msgid "Failed to register fork handler: %m\n" msgstr "無法從 %s 讀取規格檔案\n" #: sign/rpmgensig.c:88 #, c-format msgid "%s: Fwrite failed: %s\n" msgstr "%s: Fwrite 失敗：%s\n" #: sign/rpmgensig.c:98 #, fuzzy, c-format msgid "%s: Fflush failed: %s\n" msgstr "%s：檢索失敗：%s\n" #: sign/rpmgensig.c:128 #, c-format msgid "Unsupported PGP hash algorithm %d\n" msgstr "" #: sign/rpmgensig.c:141 #, c-format msgid "Unsupported PGP pubkey algorithm %d\n" msgstr "" #: sign/rpmgensig.c:171 #, c-format msgid "Couldn't create pipe for signing: %m" msgstr "" #: sign/rpmgensig.c:213 #, c-format msgid "gpg exec failed (%d)\n" msgstr "gpg 執行失敗 (%d)\n" #: sign/rpmgensig.c:243 msgid "gpg failed to write signature\n" msgstr "寫入簽名時 gpg 失敗\n" #: sign/rpmgensig.c:260 msgid "unable to read the signature\n" msgstr "無法讀取簽名\n" #: sign/rpmgensig.c:480 sign/rpmgensig.c:549 #, fuzzy msgid "rpmMkTemp failed\n" msgstr "makeTempFile 失敗\n" #: sign/rpmgensig.c:532 #, c-format msgid "%s already contains identical signature, skipping\n" msgstr "" #: sign/rpmgensig.c:557 #, c-format msgid "%s: writeLead failed: %s\n" msgstr "%s：writeLead 失敗：%s\n" #: sign/rpmgensig.c:563 #, c-format msgid "%s: rpmWriteSignature failed: %s\n" msgstr "%s：rpmWriteSignature 失敗：%s\n" #: sign/rpmgensig.c:577 #, fuzzy, c-format msgid "replacing %s failed: %s\n" msgstr "開啟 %s 失敗：%s\n" #: tools/rpmgraph.c:143 #, c-format msgid "%s: read manifest failed: %s\n" msgstr "%s: 讀取清單失敗：%s\n" #: tools/rpmgraph.c:220 msgid "don't verify header+payload signature" msgstr "不驗證表頭+酬載簽名" #~ msgid "getUname: too many uid's\n" #~ msgstr "getUname：過多的 uid\n" #~ msgid "getUnameS: too many uid's\n" #~ msgstr "getUnameS：過多的 uid\n" #~ msgid "getUidS: too many uid's\n" #~ msgstr "getUidS：過多的 uid\n" #~ msgid "getGname: too many gid's\n" #~ msgstr "getGname：過多的 gid\n" #~ msgid "getGnameS: too many gid's\n" #~ msgstr "getGnameS：過多的 gid\n" #~ msgid "getGidS: too many gid's\n" #~ msgstr "getGidS：過多的 gid\n" #~ msgid "ignore package name relation(s) [%d]\t%s -> %s\n" #~ msgstr "忽略套件名稱關聯 [%d]\t %s-> %s\n" #~ msgid "add suggested packages to transaction" #~ msgstr "加入建議的套件到異動作業" #~ msgid "do not suggest missing dependency resolution(s)" #~ msgstr "不給出相依性解決方案的建議" #, fuzzy #~ msgid "Couldn't chdir to %s: %s\n" #~ msgstr "無法執行 %s: %s\n" #~ msgid "" #~ "--nodeps may only be specified during package building, rebuilding, " #~ "recompilation, installation,erasure, and verification" #~ msgstr "--nodeps 選項只能在套件的組建、重建、重編譯、安裝、清除和校驗時指定" #~ msgid "" #~ "--root (-r) may only be specified during installation, erasure, querying, " #~ "and database rebuilds" #~ msgstr "--root(-r) 選項只能在套件的安裝、清除、查詢和資料庫重建時指定" #~ msgid "detect file conflicts between packages" #~ msgstr "在套件之間偵測會衝突的檔案" #~ msgid "temporary database %s already exists\n" #~ msgstr "臨時資料庫 %s 已經存在\n" #~ msgid "query/verify package(s) with file identifier" #~ msgstr "根據檔案識別查詢/校驗套件" #~ msgid "" #~ msgstr "<規格檔>" #~ msgid "Invalid %%_signature spec in macro file.\n" #~ msgstr "在巨集定義檔案中有不正確的 %%_signature 規格。\n" #~ msgid "%s: was already signed by key ID %s, skipping\n" #~ msgstr "%s: 已經由鍵值識別號 %s 所簽名, 跳過\n" #~ msgid "Target buffer overflow\n" #~ msgstr "目標緩衝區溢位\n" #~ msgid "no files to sign\n" #~ msgstr "沒有要簽名的檔案\n" #~ msgid "cannot access file %s\n" #~ msgstr "無法存取檔案 %s\n" #~ msgid "--sign may only be used during package building" #~ msgstr "--sign 選項只能在套件組建時指定" #~ msgid "don't verify GPG V3 DSA signature(s)" #~ msgstr "不校驗 GPG V3 DSA 簽名" #~ msgid "don't verify PGP V3 RSA/MD5 signature(s)" #~ msgstr "不校驗 PGP V3 RSA/MD5 簽名" #~ msgid "sign package(s) (identical to --resign)" #~ msgstr "對套件簽名 (與 --resign 含義相同)" #~ msgid "generate signature" #~ msgstr "產生簽名" #~ msgid "Invalid %%_signature spec in macro file\n" #~ msgstr "在巨集檔案中有無效的 %%_signature spec\n" #~ msgid "TIMECHECK failure: %s\n" #~ msgstr "時間檢查失敗：%s\n" #~ msgid "generate headers compatible with rpm4 packaging" #~ msgstr "產生相容於 rpm4 打包的表頭" #~ msgid "Internal error in argument processing (%d) :-(\n" #~ msgstr "在處理引數 (%d) 時發生內部錯誤 :-(\n" #, fuzzy #~ msgid "%s: policy file read failed.\n" #~ msgstr "%s：公鑰讀入失敗。\n" #~ msgid "readRPM: open %s: %s\n" #~ msgstr "readRPM：開啟 %s：%s\n" #~ msgid "%s: Fseek failed: %s\n" #~ msgstr "%s：檢索失敗：%s\n" #~ msgid "readRPM: %s is not an RPM package\n" #~ msgstr "readRPM：%s 不是一個 RPM 套件。\n" #~ msgid "readRPM: reading header from %s\n" #~ msgstr "readRPM：正在讀取 %s 的檔案表頭\n" #~ msgid "Generating signature: %d\n" #~ msgstr "產生簽名：%d\n" #~ msgid "generate PGP/GPG signature" #~ msgstr "產生 PGP/GPG 簽名" #~ msgid "no packages files given for rebuild" #~ msgstr "沒有指定要重建的套件名稱" #~ msgid "no spec files given for build" #~ msgstr "沒有指定用於組建的規格檔案名稱" #~ msgid "no tar files given for build" #~ msgstr "沒有指定用於組建的打包檔案名稱" #, fuzzy #~ msgid "%s failed\n" #~ msgstr "%s 失敗：%s\n" #~ msgid "Recursion depth(%d) greater than max(%d)\n" #~ msgstr "遞迴深度(%d)大於最大值(%d)\n" #~ msgid "dbiTagsInit: unrecognized tag name: \"%s\" ignored\n" #~ msgstr "dbiTagsInit：無法辨識的標記名稱：\"%s\"忽略\n" #~ msgid "rpmdbAdd: skipping" #~ msgstr "rpmdbAdd：跳過" #~ msgid "(rpmlib provides)" #~ msgstr "(rpmlib 提供)" #~ msgid "(cached)" #~ msgstr "(快取)" #~ msgid "(db files)" #~ msgstr "(資料庫檔案)" #~ msgid "(db provides)" #~ msgstr "(資料庫提供)" #~ msgid "(added files)" #~ msgstr "(加入的檔案)" #~ msgid "(added provide)" #~ msgstr "(加入的提供物)" #~ msgid "url port must be a number\n" #~ msgstr "網址連接埠必須是數字\n" #~ msgid "File tree walk options (with --ftswalk):" #~ msgstr "檔案樹遍歷選項 (使用 --ftswalk)：" #~ msgid "follow command line symlinks" #~ msgstr "跟隨命令列符號連結" #~ msgid "logical walk" #~ msgstr "邏輯遍歷" #~ msgid "don't change directories" #~ msgstr "不變更目錄" #~ msgid "don't get stat info" #~ msgstr "不取得狀態資訊" #~ msgid "physical walk" #~ msgstr "實體遍歷" #~ msgid "return dot and dot-dot" #~ msgstr "回傳 . 和 .." #~ msgid "don't cross devices" #~ msgstr "不交叉裝置" #~ msgid "return whiteout information" #~ msgstr "回傳空白化資訊" #~ msgid "debug package state machine" #~ msgstr "對套件狀態機器除錯" #~ msgid "query/verify package(s) from TOP file tree walk" #~ msgstr "從頂端遍歷檔案樹查詢/驗證套件" #~ msgid "query/verify package(s) from system HDLIST" #~ msgstr "系統 HDLIST 查詢/驗證套件從" #~ msgid "do not order transaction set" #~ msgstr "不排序異動作業集" #~ msgid "do not read headers" #~ msgstr "不讀取表頭" #~ msgid "File doesn't match prefix (%s): %s\n" #~ msgstr "檔案與字首不匹配 (%s)：%s\n" #, fuzzy #~ msgid "Unable to get current dependency name.\n" #~ msgstr "移除目錄時失敗 %s: %s\n" #~ msgid "use threads for package state machine" #~ msgstr "使用執行緒用於套件狀態機" #~ msgid "%s: %s scriptlet failed (%d), skipping %s\n" #~ msgstr "%s：%s 短命令稿執行失敗 (%d)，略過 %s\n" #~ msgid "mntctl() failed to return size: %s\n" #~ msgstr "mntctl() 回傳大小失敗：%s\n" #~ msgid "mntctl() failed to return mount points: %s\n" #~ msgstr "mntctl() 回傳掛載點失敗：%s\n" #~ msgid "failed to stat %s: %s\n" #~ msgstr "無法檢驗狀態：%s：%s\n" #~ msgid "file %s is on an unknown device\n" #~ msgstr "檔案 %s 位於一個不明的裝置上\n" #~ msgid "use threads for file state machine" #~ msgstr "使用執行緒做為檔案狀態機器" #~ msgid "cannot open %s index\n" #~ msgstr "無法開啟 %s 索引\n" #, fuzzy #~ msgid "Unable to initDB %s (%d)\n" #~ msgstr "無法開啟 %s：%s\n" #, fuzzy #~ msgid "Unable to open database: %s\n" #~ msgstr "無法開啟 %s：%s\n" #, fuzzy #~ msgid "Unable to determine DB endianess.\n" #~ msgstr "無法開啟暫時檔案。\n" #, fuzzy #~ msgid "Unknown system error" #~ msgstr "不明的系統：%s\n" #~ msgid "Macro %%%.*s not found, skipping\n" #~ msgstr "找不到巨集 %%%.*s，跳過\n" #~ msgid "%s: *.te policy read failed.\n" #~ msgstr "%s: *.te 策略讀取失敗。\n" #~ msgid "line %d: Second %%files list\n" #~ msgstr "列 %d：重複的 %%files 清單\n" #~ msgid "" #~ "The \"B\" dependency needs an epoch (assuming same epoch as \"A\")\n" #~ "\tA = \"%s\"\tB = \"%s\"\n" #~ msgstr "" #~ "\"B\"相依性需要世代 (假設與 \"A\" 為相同世代)\n" #~ "\tA = \"%s\"\tB = \"%s\"\n" #~ msgid "Data type %d not supported\n" #~ msgstr "不支援資料類型 %d\n" #~ msgid "Legacy syntax is unsupported: %s\n" #~ msgstr "不支援舊語法：%s\n" #~ msgid "removing %s \"%s\" from tsort relations.\n" #~ msgstr "從樹狀排列關係移除 %s\"%s\"。\n" #~ msgid "LOOP:\n" #~ msgstr "迴圈：\n" #~ msgid "rpmtsOrder failed, %d elements remain\n" #~ msgstr "rpmtsOrder 失敗，剩下 %d 個元件\n" #, fuzzy #~ msgid "Header+Payload size:" #~ msgstr "表頭+酬載大小：" #~ msgid "Source options (with --query or --verify):" #~ msgstr "原始碼選項 (使用 --query 或 --verify)：" #~ msgid "pgp not found: " #~ msgstr "找不到 pgp： " #~ msgid "cannot open file %s: %s\n" #~ msgstr "無法開啟檔案 %s：%s\n" #~ msgid "pgp failed\n" #~ msgstr "pgp 失敗\n" #~ msgid "pgp failed to write signature\n" #~ msgstr "pgp 寫入簽名時失敗\n" #~ msgid "You must set \"%%_pgp_name\" in your macro file\n" #~ msgstr "您必須在您的巨集檔案中設定 \"%%_pgp_name\"\n" #, fuzzy #~ msgid "Unknown" #~ msgstr "不明的標記" #, fuzzy #~ msgid "%sV%d %s signature: %s\n" #~ msgstr " 簽名：" #, fuzzy #~ msgid "%sV%d DSA signature: %s\n" #~ msgstr " DSA 簽名：" #~ msgid "Broken MD5 digest: UNSUPPORTED\n" #~ msgstr "不完整的 MD 5 摘要：不支援\n" #~ msgid "BuildRoot can not be \"/\": %s\n" #~ msgstr "BuildRoot 不能是「/」：%s\n" #~ msgid "Spec file can't use BuildRoot\n" #~ msgstr "規格檔案不能使用 BuildRoot\n" #~ msgid "lookup i18N strings in specfile catalog" #~ msgstr "在規格檔目錄中查找 i18N 字串" #~ msgid "generate headers compatible with (legacy) rpm[23] packaging" #~ msgstr "產生與(舊的) rpm[23] 包裝相容的表頭" #~ msgid "cannot create %%%s %s\n" #~ msgstr "無法建立 %%%s %s\n" #~ msgid "cannot write to %%%s %s\n" #~ msgstr "無法寫入 %%%s %s\n" #~ msgid "can't query %s: %s\n" #~ msgstr "無法查詢 %s：%s\n" #, fuzzy #~ msgid "(encoding failed)" #~ msgstr "執行失敗\n" #~ msgid "debug URL cache handling" #~ msgstr "對網址快取處理除錯" #~ msgid "substitute i18n sections into spec file" #~ msgstr "替代 i18n 區段進入規格檔案" #~ msgid "cannot open Solve database in %s\n" #~ msgstr "無法開啟解析資料庫於 %s\n" #~ msgid " Suggested resolutions:\n" #~ msgstr " 推薦解決方案：\n" #~ msgid "(index out of range)" #~ msgstr "(索引超出範圍)" #~ msgid "Success" #~ msgstr "成功" #~ msgid "Bad server response" #~ msgstr "不當的伺服器回應" #~ msgid "Server I/O error" #~ msgstr "伺服器 I/O 錯誤" #~ msgid "Server timeout" #~ msgstr "伺服器逾時" #~ msgid "Unable to lookup server host address" #~ msgstr "無法查找伺服器主機位址" #~ msgid "Unable to lookup server host name" #~ msgstr "無法查找伺服器主機名稱" #~ msgid "Failed to establish data connection to server" #~ msgstr "建立資料連接到伺服器時失敗" #~ msgid "I/O error to local file" #~ msgstr "到本機檔案的 I/O 錯誤" #~ msgid "Error setting remote server to passive mode" #~ msgstr "設定遠端伺服器為被動模式時發生錯誤" #~ msgid "File not found on server" #~ msgstr "在伺服器上找不到檔案" #~ msgid "Abort in progress" #~ msgstr "正在進行放棄" #~ msgid "Unknown or unexpected error" #~ msgstr "不明的或非預期錯誤" #~ msgid "don't update cache database, only print package paths" #~ msgstr "不更新快取資料庫，只有印出套件路徑" #~ msgid "File tree walk options:" #~ msgstr "檔案樹遍歷選項：" #~ msgid "%s: %%{_cache_dbpath} macro is mis-configured.\n" #~ msgstr "%s: %%{_cache_dbpath } 巨集設定錯誤。\n" #~ msgid "%s: cache operation failed: ec %d.\n" #~ msgstr "%s: 快取作業失敗：ec %d。\n" #~ msgid "%s: headerGetEntry failed\n" #~ msgstr "%s：headerGetEntry 失敗\n" #~ msgid "%s expansion failed at %s:%d \"%s\"\n" #~ msgstr "%s 擴充失敗於 %s:%d \"%s\"\n" #~ msgid "Cannot expand %s\n" #~ msgstr "無法展開 %s\n" #~ msgid "Cannot read %s, HOME is too large.\n" #~ msgstr "無法讀取 %s，HOME 過大。\n" #, fuzzy #~ msgid "getcwd failed: %m\n" #~ msgstr "%s 移除目錄 %s 失敗：%s\n" #~ msgid "Hit limit for %%docdir\n" #~ msgstr "%%docdir 的數量上限\n" #~ msgid "line %d: Need arg to %%patch -b: %s\n" #~ msgstr "列 %d：%%patch -b 需要引數：%s\n" #~ msgid "line %d: Need arg to %%patch -z: %s\n" #~ msgstr "列 %d：%%patch -z 需要引數：%s\n" #, fuzzy #~ msgid "line %d: Bad arg to %%patch -F: %s\n" #~ msgstr "列 %d：%%patch -p 的引數錯誤：%s\n" #~ msgid "line %d: Need arg to %%patch -p: %s\n" #~ msgstr "列 %d：%%patch -p 需要引數：%s\n" #~ msgid "line %d: Bad arg to %%patch -p: %s\n" #~ msgstr "列 %d：%%patch -p 的引數錯誤：%s\n" #~ msgid "Too many patches!\n" #~ msgstr "修補過多！\n" #~ msgid "line %d: Bad arg to %%patch: %s\n" #~ msgstr "列 %d：%%patch 的引數錯誤：%s\n" #~ msgid "debug option/argument processing" #~ msgstr "對選項/引數處理除錯" #~ msgid "skip %%license files" #~ msgstr "略過 %%license 檔案" #~ msgid "skip %%readme files" #~ msgstr "略過 %%readme 檔案" #, fuzzy #~ msgid "URL helper failed: %s (%d)\n" #~ msgstr "讀取失敗：%s (%d)\n" #~ msgid "rollback takes a time/date stamp argument" #~ msgstr "回捲需要時間/日期戳記引數" #~ msgid "malformed rollback time/date stamp argument" #~ msgstr "異常的回捲時間/日期戳記引數" #~ msgid "save erased package files by renaming into sub-directory" #~ msgstr "將清除的套件內的檔案重新命名後轉移到一個子目錄中" #~ msgid "save erased package files by repackaging" #~ msgstr "將已清除套件內的檔案另存為一個套件" #~ msgid "deinstall new, reinstall old, package(s), back to " #~ msgstr "反安裝新增，重新安裝舊的套件，回到<日期>" #~ msgid "" #~ msgstr "<日期>" #~ msgid "Unable to reload signature header\n" #~ msgstr "無法重載簽名表頭\n" #~ msgid "Repackaging..." #~ msgstr "重新打包中…" #~ msgid "Repackaging erased files..." #~ msgstr "正在重新打包被清除的檔案…" #~ msgid "Upgrading..." #~ msgstr "更新中…" #~ msgid "Upgrading packages..." #~ msgstr "正在更新套件…" #~ msgid "Rollback packages (+%d/-%d) to %-24.24s (0x%08x):\n" #~ msgstr "回溯套件 (+%d/-%d) to %-24.24s (0x%08x)：\n" #~ msgid "Cleaning up repackaged packages:\n" #~ msgstr "正在清除重新產生的打包：\n" #~ msgid "\tRemoving %s:\n" #~ msgstr "\t正在移除 %s：\n" #~ msgid "Transaction failed...rolling back\n" #~ msgstr "異動作業失敗…返回\n" #~ msgid "Could not order auto-rollback transaction!\n" #~ msgstr "無法排列自動返回異動作業的順序！\n" #~ msgid "Could not get install element database instance!\n" #~ msgstr "無法取得安裝元件資料庫實體！\n" #~ msgid "Could not get header for auto-rollback transaction!\n" #~ msgstr "無法取得表頭用於自動返回異動作業！\n" #~ msgid "\tAdded from install element %s.\n" #~ msgstr "\t已從安裝元件 %s 加入。\n" #~ msgid "Could not get repackaged header for auto-rollback transaction!\n" #~ msgstr "無法取得重新包裝的表頭用於自動返回異動作業！\n" #~ msgid "Could not add erase element to auto-rollback transaction.\n" #~ msgstr "無法加入清除元件到自動返回異動作業。\n" #~ msgid "Failure reading repackaged package!\n" #~ msgstr "讀取重新包裝的套件時失敗！\n" #~ msgid "Add failed. Could not read package header.\n" #~ msgstr "加入失敗。無法讀取套件表頭。\n" #~ msgid "Add failed in rpmpsmStage().\n" #~ msgstr "加入 rpmpsmStage() 中失敗。\n" #~ msgid "Add failed. Could not get file list.\n" #~ msgstr "加入失敗。無法取得檔案清單。\n" #~ msgid "Erase failed failed in rpmpsmStage().\n" #~ msgstr "清除 rpmpsmStage() 中檔案失敗。\n" #, fuzzy #~ msgid "\twaitpid(%d) rc %d status %x\n" #~ msgstr "%s: waitpid(%d) rc %d 狀況 %x 秒 %u.%03u\n" #~ msgid " Obsoletes: %s\t\terases %s\n" #~ msgstr " 過時的：%s\t\t清除 %s\n" #~ msgid "========== recording tsort relations\n" #~ msgstr "========== 記錄樹狀排列關係\n" #~ msgid "" #~ "========== tsorting packages (order, #predecessors, #succesors, tree, " #~ "depth, breadth)\n" #~ msgstr "========== 樹狀排列套件 (次序、#前行者、#後繼者、樹、深度、廣度)\n" #~ msgid "========== successors only (%d bytes)\n" #~ msgstr "========== 只有後繼符號 (%d 位元組)\n" #~ msgid "========== continuing tsort ...\n" #~ msgstr "========== 繼續樹狀排列…\n" #~ msgid "%5d 0x%04x %s %s\n" #~ msgstr "%5d 0x%04x %s %s\n" #~ msgid "========== Directories not explicitly included in package:\n" #~ msgstr "========== 未被明確包含在套件內的目錄：\n" #~ msgid "%10d %s\n" #~ msgstr "%10d %s\n" #~ msgid "%s directory created with perms %04o, no context.\n" #~ msgstr "建立的 %s 目錄附有 perms %04o, 無上下文。\n" #~ msgid "%s directory created with perms %04o, context %s.\n" #~ msgstr "%s 建立的目錄附有 perms %04o, 上下文 %s。\n" #~ msgid "adding %d args from manifest.\n" #~ msgstr "從清單中加入 %d 個引數。\n" #~ msgid "disable use of libio(3) API" #~ msgstr "停止使用 libio(3) API" #~ msgid "%s: waitpid(%d) rc %d status %x secs %u.%03u\n" #~ msgstr "%s: waitpid(%d) rc %d 狀況 %x 秒 %u.%03u\n" #~ msgid "%s: %s(%s-%s-%s.%s) running scriptlet.\n" #~ msgstr "%s: %s(%s-%s-%s.%s) 正在執行 短命令稿。\n" #~ msgid "%s: %s(%s-%s-%s.%s) skipping redundant \"%s\".\n" #~ msgstr "%s: %s(%s-%s-%s.%s) 正在略過冗餘的「%s」。\n" #~ msgid "%s: %s(%s-%s-%s.%s) %ssynchronous scriptlet start\n" #~ msgstr "%s: %s(%s-%s-%s.%s) %s同步的短命令稿開始\n" #~ msgid "%s: %s(%s-%s-%s.%s)\texecv(%s) pid %d\n" #~ msgstr "%s: %s(%s-%s-%s.%s)\texecv(%s) pid %d\n" #~ msgid "%s: %s has %d files, test = %d\n" #~ msgstr "%s ：%s 含有 %d 個檔案，test = %d\n" #, fuzzy #~ msgid "Attempting to mark %s as installed in score board(%p).\n" #~ msgstr "試圖在記錄板(%2$u)中標記 %1$s 為已安裝。\n" #, fuzzy #~ msgid "Attempting to mark %s as erased in score board(%p).\n" #~ msgstr "試圖在記錄板(0x%2$x)中標記 %1$s 為已清除。\n" #~ msgid "package record number: %u\n" #~ msgstr "套件記錄：%u\n" #~ msgid " %s A %s\tB %s\n" #~ msgstr " %s A %s\tB %s\n" #~ msgid "package %s has unsatisfied %s: %s\n" #~ msgstr "套件 %s 有不滿足的 %s：%s\n" #~ msgid "%s skipped due to missingok flag\n" #~ msgstr "%s 由於 missingok 旗標而被略過\n" #~ msgid "========== relocations\n" #~ msgstr "========== 重新部署\n" #~ msgid "%5d exclude %s\n" #~ msgstr "%5d 排除 %s\n" #~ msgid "%5d relocate %s -> %s\n" #~ msgstr "%5d 重新部署 %s -> %s\n" #~ msgid "excluding %s %s\n" #~ msgstr "排除 %s %s\n" #~ msgid "relocating %s to %s\n" #~ msgstr "重新部署 %s 到 %s\n" #~ msgid "relocating directory %s to %s\n" #~ msgstr "重新部署目錄 %s 到 %s\n" #~ msgid "Adding goal: %s\n" #~ msgstr "加入目的物：%s\n" #~ msgid " ... as %s\n" #~ msgstr " … 為 %s\n" #~ msgid "\tadded source package [%d]\n" #~ msgstr "\t加入原始碼套件 [%d]\n" #~ msgid "\tadded binary package [%d]\n" #~ msgstr "\t加入二進位套件 [%d]\n" #~ msgid "found %d source and %d binary packages\n" #~ msgstr "找到 %d 個原始碼套件和 %d 個二進位套件\n" #~ msgid "installing binary packages\n" #~ msgstr "正在安裝二進位套件\n" #~ msgid "Adding: %s\n" #~ msgstr "正在加入：%s\n" #~ msgid "Suggesting: %s\n" #~ msgstr "正在建議：%s\n" #~ msgid "mounted filesystems:\n" #~ msgstr "已掛載的檔案系統：\n" #~ msgid " i dev bsize bavail iavail mount point\n" #~ msgstr " i dev bsize bavail iavail 掛載點\n" #~ msgid "%5d 0x%08x %8u %12ld %12ld %s\n" #~ msgstr "%5d 0x%08x %8u %12ld %12ld %s\n" #~ msgid "Creating transaction score board(%p, %p)\n" #~ msgstr "產生異動作業記錄板(%p, %p)\n" #~ msgid "\tScore board address: %p\n" #~ msgstr "\t記錄板位址： %p\n" #~ msgid "\tAllocating space for %d entries\n" #~ msgstr "\t配置空間給 %d 項條目\n" #~ msgid "\tAdding entry for %s to score board.\n" #~ msgstr "\t加入 %s 的條目到記錄板。\n" #~ msgid "\t\tEntry address: %p\n" #~ msgstr "\t\t條目位址： %p\n" #~ msgid "\tUpdating entry for %s in score board.\n" #~ msgstr "\t在記錄板中更新 %s 條目。\n" #~ msgid "May free Score board(%p)\n" #~ msgstr "也許會釋放記錄板(%p)\n" #~ msgid "\tRefcount is zero...will free\n" #~ msgstr "\t參照數為零…將會釋放\n" #~ msgid "Looking in score board(%p) for %s\n" #~ msgstr "在記錄板(%p)中查找 %s\n" #~ msgid "\tFound entry at address: %p\n" #~ msgstr "\t找到條目於位址： %p\n" #, fuzzy #~ msgid "Expected size: %12d = lead(%d)+sigs(%zd)+pad(%zd)+data(%zd)\n" #~ msgstr "預期的大小：%12d = lead(%d)+ sigs(%d)+pad(%d)+data(%d)\n" #~ msgid " Actual size: %12d\n" #~ msgstr " 實際的大小：%12d\n" #~ msgid "Signature: size(%d)+pad(%d)\n" #~ msgstr "簽名：size(%d)+pad(%d)\n" #~ msgid "PGP sig size: %d\n" #~ msgstr "PGP sig 大小：%d\n" #~ msgid "Got %d bytes of PGP sig\n" #~ msgstr "得到 %d 位元組的 PGP sig\n" #~ msgid "GPG sig size: %d\n" #~ msgstr "GPG sig 大小：%d\n" #~ msgid "Got %d bytes of GPG sig\n" #~ msgstr "得到 %d 位元組的 GPG sig\n" #~ msgid "excluding directory %s\n" #~ msgstr "排除目錄 %s\n" #~ msgid "Getting repackaged header from transaction element\n" #~ msgstr "從異動作業元件取得重新包裝的表頭\n" #~ msgid "\tLooking for %s...\n" #~ msgstr "\t查找 %s…\n" #~ msgid "\tMatches found.\n" #~ msgstr "\t找到相符者。\n" #~ msgid "\tNo matches found.\n" #~ msgstr "\t找不到相符者。\n" #~ msgid "\tRepackaged package not found!.\n" #~ msgstr "\t找不到重新包裝的套件！。\n" #~ msgid "\tREMOVETID matched INSTALLTID.\n" #~ msgstr "\t移除識別號符合安裝識別號。\n" #~ msgid "\t\tName: %s.\n" #~ msgstr "\t\t名稱： %s。\n" #~ msgid "\tRepackaged Package was %s...\n" #~ msgstr "\t重新包裝的套件是 %s…\n" #~ msgid "Adding install element to auto-rollback transaction.\n" #~ msgstr "加入安裝元件到自動返回異動作業。\n" #~ msgid "\tAdded repackaged package header: %s.\n" #~ msgstr "\t已加入重新包裝的套件表頭：%s。\n" #~ msgid "\tAdded erase element.\n" #~ msgstr "\t已加入清除元件。\n" #~ msgid "Add erase element to auto-rollback transaction.\n" #~ msgstr "加入清除元件到自動返回異動作業。\n" #~ msgid "\tFound existing upgrade element.\n" #~ msgstr "\t找到現有升級元件。\n" #~ msgid "\tNot adding erase element for %s.\n" #~ msgstr "\t不加入 %s 的清除元件。\n" #~ msgid "\tAdded repackaged package %s.\n" #~ msgstr "\t已加入重新包裝的套件 %s。\n" #~ msgid "\tAdded from erase element %s.\n" #~ msgstr "\t已從清除元件 %s 加入。\n" #~ msgid "\tNo repackaged package...nothing to do.\n" #~ msgstr "\t沒有重新包裝的套件…無事可做。\n" #~ msgid "sanity checking %d elements\n" #~ msgstr "明智地檢查 %d 元件\n" #~ msgid "running pre-transaction scripts\n" #~ msgstr "正在執行異動作業前命令稿\n" #~ msgid "computing %d file fingerprints\n" #~ msgstr "正在計算 %d 個檔案指紋\n" #~ msgid "computing file dispositions\n" #~ msgstr "計算檔案部署\n" #~ msgid "Creating auto-rollback transaction\n" #~ msgstr "產生自動返回異動作業\n" #~ msgid "running post-transaction scripts\n" #~ msgstr "正在執行異動作業後期命令稿\n" #~ msgid "closed db environment %s/%s\n" #~ msgstr "關閉資料庫環境 %s/%s\n" #~ msgid "removed db environment %s/%s\n" #~ msgstr "移除資料庫環境 %s/%s\n" #~ msgid "opening db environment %s/%s %s\n" #~ msgstr "開啟資料庫環境 %s/%s %s\n" #~ msgid "closed db index %s/%s\n" #~ msgstr "關閉資料庫索引 %s/%s\n" #~ msgid "opening db index %s/%s %s mode=0x%x\n" #~ msgstr "開啟資料庫索引 %s/%s %s 模式=0x%x\n" #~ msgid "locked db index %s/%s\n" #~ msgstr "鎖定的資料庫索引 %s/%s\n" #~ msgid "removing \"%s\" from %s index.\n" #~ msgstr "正在從 %1$s 索引移除 \"%2$s\"。\n" #~ msgid "removing %d entries from %s index.\n" #~ msgstr "正在從 %2$s 索引移除 %1$d 項條目。\n" #~ msgid "adding \"%s\" to %s index.\n" #~ msgstr "正在加入 \"%s\" 到 %s 索引。\n" #~ msgid "adding %d entries to %s index.\n" #~ msgstr "正在加入 %d 項條目到 %s 索引。\n" #~ msgid "removing %s after successful db3 rebuild.\n" #~ msgstr "成功重建 db3 之後移除 %s。\n" #~ msgid "rebuilding database %s into %s\n" #~ msgstr "重建資料庫 %s 於 %s\n" #~ msgid "creating directory %s\n" #~ msgstr "產生目錄 %s\n" #~ msgid "creating directory %s: %s\n" #~ msgstr "產生目錄 %s: %s\n" #~ msgid "opening old database with dbapi %d\n" #~ msgstr "以 dbapi %d 開啟舊的資料庫\n" #~ msgid "opening new database with dbapi %d\n" #~ msgstr "以 dbapi %d 開啟新的資料庫\n" #~ msgid "removing directory %s\n" #~ msgstr "移除目錄 %s\n" #, fuzzy #~ msgid "closed sql db %s\n" #~ msgstr "關閉資料庫索引 %s/%s\n" #, fuzzy #~ msgid "opening sql db %s (%s) mode=0x%x\n" #~ msgstr "開啟資料庫索引 %s/%s %s 模式=0x%x\n" #~ msgid "readRPM: read %s: %s\n" #~ msgstr "readRPM：讀取 %s：%s\n" #~ msgid "Unable to write final header\n" #~ msgstr "無法寫入表頭結尾\n" #~ msgid "packaging version 1 is not supported by this version of RPM\n" #~ msgstr "此 RPM 版本不支援第 1 版的打包\n" #~ msgid "" #~ "only packaging with major numbers <= 4 is supported by this version of " #~ "RPM\n" #~ msgstr "此 RPM 版本只支援主版本號 <=4 的打包\n" #~ msgid "%s: Can't sign v1 packaging\n" #~ msgstr "%s：無法對 v1 版打包簽名\n" #~ msgid "%s: Can't re-sign v2 packaging\n" #~ msgstr "%s：無法對 v2 版打包重新簽名\n" #~ msgid "%s: No signature available (v1.0 RPM)\n" #~ msgstr "%s：無可用簽名 (v1.0 RPM)\n"