path: root/hw/highbank.c

/*
 * Calxeda Highbank SoC emulation
 *
 * Copyright (c) 2010-2012 Calxeda
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2 or later, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#include "sysbus.h"
#include "arm-misc.h"
#include "devices.h"
#include "loader.h"
#include "net.h"
#include "sysemu.h"
#include "boards.h"
#include "sysbus.h"
#include "blockdev.h"
#include "exec-memory.h"

#define SMP_BOOT_ADDR 0x100
#define SMP_BOOT_REG  0x40
#define GIC_BASE_ADDR 0xfff10000

#define NIRQ_GIC      160

/* Board init.  */
static void highbank_cpu_reset(void *opaque)
{
    CPUState *env = opaque;

    env->cp15.c15_config_base_address = GIC_BASE_ADDR;
}

static void hb_write_secondary(CPUState *env, const struct arm_boot_info *info)
{
    int n;
    uint32_t smpboot[] = {
        0xee100fb0, /* mrc p15, 0, r0, c0, c0, 5 - read current core id */
        0xe210000f, /* ands r0, r0, #0x0f */
        0xe3a03040, /* mov r3, #0x40 - jump address is 0x40 + 0x10 * core id */
        0xe0830200, /* add r0, r3, r0, lsl #4 */
        0xe59f2018, /* ldr r2, privbase */
        0xe3a01001, /* mov r1, #1 */
        0xe5821100, /* str r1, [r2, #256] */
        0xe320f003, /* wfi */
        0xe5901000, /* ldr     r1, [r0] */
        0xe1110001, /* tst     r1, r1 */
        0x0afffffb, /* beq     <wfi> */
        0xe12fff11, /* bx      r1 */
        GIC_BASE_ADDR      /* privbase: gic address.  */
    };
    for (n = 0; n < ARRAY_SIZE(smpboot); n++) {
        smpboot[n] = tswap32(smpboot[n]);
    }
    rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot), SMP_BOOT_ADDR);
}

static void hb_reset_secondary(CPUState *env, const struct arm_boot_info *info)
{
    switch (info->nb_cpus) {
    case 4:
        stl_phys_notdirty(SMP_BOOT_REG + 0x30, 0);
    case 3:
        stl_phys_notdirty(SMP_BOOT_REG + 0x20, 0);
    case 2:
        stl_phys_notdirty(SMP_BOOT_REG + 0x10, 0);
        env->regs[15] = SMP_BOOT_ADDR;
        break;
    default:
        break;
    }
}

#define NUM_REGS      0x200
static void hb_regs_write(void *opaque, target_phys_addr_t offset,
                          uint64_t value, unsigned size)
{
    uint32_t *regs = opaque;

    if (offset == 0xf00) {
        if (value == 1 || value == 2) {
            qemu_system_reset_request();
        } else if (value == 3) {
            qemu_system_shutdown_request();
        }
    }

    regs[offset/4] = value;
}

static uint64_t hb_regs_read(void *opaque, target_phys_addr_t offset,
                             unsigned size)
{
    uint32_t *regs = opaque;
    uint32_t value = regs[offset/4];

    if ((offset == 0x100) || (offset == 0x108) || (offset == 0x10C)) {
        value |= 0x30000000;
    }

    return value;
}

static const MemoryRegionOps hb_mem_ops = {
    .read = hb_regs_read,
    .write = hb_regs_write,
    .endianness = DEVICE_NATIVE_ENDIAN,
};

typedef struct {
    SysBusDevice busdev;
    MemoryRegion *iomem;
    uint32_t regs[NUM_REGS];
} HighbankRegsState;

static VMStateDescription vmstate_highbank_regs = {
    .name = "highbank-regs",
    .version_id = 0,
    .minimum_version_id = 0,
    .minimum_version_id_old = 0,
    .fields = (VMStateField[]) {
        VMSTATE_UINT32_ARRAY(regs, HighbankRegsState, NUM_REGS),
        VMSTATE_END_OF_LIST(),
    },
};

static void highbank_regs_reset(DeviceState *dev)
{
    SysBusDevice *sys_dev = sysbus_from_qdev(dev);
    HighbankRegsState *s = FROM_SYSBUS(HighbankRegsState, sys_dev);

    s->regs[0x40] = 0x05F20121;
    s->regs[0x41] = 0x2;
    s->regs[0x42] = 0x05F30121;
    s->regs[0x43] = 0x05F40121;
}

static int highbank_regs_init(SysBusDevice *dev)
{
    HighbankRegsState *s = FROM_SYSBUS(HighbankRegsState, dev);

    s->iomem = g_new(MemoryRegion, 1);
    memory_region_init_io(s->iomem, &hb_mem_ops, s->regs, "highbank_regs",
                          0x1000);
    sysbus_init_mmio(dev, s->iomem);

    return 0;
}

static void highbank_regs_class_init(ObjectClass *klass, void *data)
{
    SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(klass);
    DeviceClass *dc = DEVICE_CLASS(klass);

    sbc->init = highbank_regs_init;
    dc->desc = "Calxeda Highbank registers";
    dc->vmsd = &vmstate_highbank_regs;
    dc->reset = highbank_regs_reset;
}

static TypeInfo highbank_regs_info = {
    .name          = "highbank-regs",
    .parent        = TYPE_SYS_BUS_DEVICE,
    .instance_size = sizeof(HighbankRegsState),
    .class_init    = highbank_regs_class_init,
};

static void highbank_regs_register_types(void)
{
    type_register_static(&highbank_regs_info);
}

type_init(highbank_regs_register_types)

static struct arm_boot_info highbank_binfo;

/* ram_size must be set to match the upper bound of memory in the
 * device tree (linux/arch/arm/boot/dts/highbank.dts), which is
 * normally 0xff900000 or -m 4089. When running this board on a
 * 32-bit host, set the reg value of memory to 0xf7ff00000 in the
 * device tree and pass -m 2047 to QEMU.
 */
static void highbank_init(ram_addr_t ram_size,
                     const char *boot_device,
                     const char *kernel_filename, const char *kernel_cmdline,
                     const char *initrd_filename, const char *cpu_model)
{
    CPUState *env = NULL;
    DeviceState *dev;
    SysBusDevice *busdev;
    qemu_irq *irqp;
    qemu_irq pic[128];
    int n;
    qemu_irq cpu_irq[4];
    MemoryRegion *sysram;
    MemoryRegion *dram;
    MemoryRegion *sysmem;
    char *sysboot_filename;

    if (!cpu_model) {
        cpu_model = "cortex-a9";
    }

    for (n = 0; n < smp_cpus; n++) {
        env = cpu_init(cpu_model);
        if (!env) {
            fprintf(stderr, "Unable to find CPU definition\n");
            exit(1);
        }
        irqp = arm_pic_init_cpu(env);
        cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
        qemu_register_reset(highbank_cpu_reset, env);
    }

    sysmem = get_system_memory();
    dram = g_new(MemoryRegion, 1);
    memory_region_init_ram(dram, "highbank.dram", ram_size);
    /* SDRAM at address zero.  */
    memory_region_add_subregion(sysmem, 0, dram);

    sysram = g_new(MemoryRegion, 1);
    memory_region_init_ram(sysram, "highbank.sysram", 0x8000);
    memory_region_add_subregion(sysmem, 0xfff88000, sysram);
    if (bios_name != NULL) {
        sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
        if (sysboot_filename != NULL) {
            uint32_t filesize = get_image_size(sysboot_filename);
            if (load_image_targphys("sysram.bin", 0xfff88000, filesize) < 0) {
                hw_error("Unable to load %s\n", bios_name);
            }
        } else {
           hw_error("Unable to find %s\n", bios_name);
        }
    }

    dev = qdev_create(NULL, "a9mpcore_priv");
    qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
    qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC);
    qdev_init_nofail(dev);
    busdev = sysbus_from_qdev(dev);
    sysbus_mmio_map(busdev, 0, GIC_BASE_ADDR);
    for (n = 0; n < smp_cpus; n++) {
        sysbus_connect_irq(busdev, n, cpu_irq[n]);
    }

    for (n = 0; n < 128; n++) {
        pic[n] = qdev_get_gpio_in(dev, n);
    }

    dev = qdev_create(NULL, "l2x0");
    qdev_init_nofail(dev);
    busdev = sysbus_from_qdev(dev);
    sysbus_mmio_map(busdev, 0, 0xfff12000);

    dev = qdev_create(NULL, "sp804");
    qdev_prop_set_uint32(dev, "freq0", 150000000);
    qdev_prop_set_uint32(dev, "freq1", 150000000);
    qdev_init_nofail(dev);
    busdev = sysbus_from_qdev(dev);
    sysbus_mmio_map(busdev, 0, 0xfff34000);
    sysbus_connect_irq(busdev, 0, pic[18]);
    sysbus_create_simple("pl011", 0xfff36000, pic[20]);

    dev = qdev_create(NULL, "highbank-regs");
    qdev_init_nofail(dev);
    busdev = sysbus_from_qdev(dev);
    sysbus_mmio_map(busdev, 0, 0xfff3c000);

    sysbus_create_simple("pl061", 0xfff30000, pic[14]);
    sysbus_create_simple("pl061", 0xfff31000, pic[15]);
    sysbus_create_simple("pl061", 0xfff32000, pic[16]);
    sysbus_create_simple("pl061", 0xfff33000, pic[17]);
    sysbus_create_simple("pl031", 0xfff35000, pic[19]);
    sysbus_create_simple("pl022", 0xfff39000, pic[23]);

    sysbus_create_simple("sysbus-ahci", 0xffe08000, pic[83]);

    if (nd_table[0].vlan) {
        qemu_check_nic_model(&nd_table[0], "xgmac");
        dev = qdev_create(NULL, "xgmac");
        qdev_set_nic_properties(dev, &nd_table[0]);
        qdev_init_nofail(dev);
        sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0xfff50000);
        sysbus_connect_irq(sysbus_from_qdev(dev), 0, pic[77]);
        sysbus_connect_irq(sysbus_from_qdev(dev), 1, pic[78]);
        sysbus_connect_irq(sysbus_from_qdev(dev), 2, pic[79]);

        qemu_check_nic_model(&nd_table[1], "xgmac");
        dev = qdev_create(NULL, "xgmac");
        qdev_set_nic_properties(dev, &nd_table[1]);
        qdev_init_nofail(dev);
        sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0xfff51000);
        sysbus_connect_irq(sysbus_from_qdev(dev), 0, pic[80]);
        sysbus_connect_irq(sysbus_from_qdev(dev), 1, pic[81]);
        sysbus_connect_irq(sysbus_from_qdev(dev), 2, pic[82]);
    }

    highbank_binfo.ram_size = ram_size;
    highbank_binfo.kernel_filename = kernel_filename;
    highbank_binfo.kernel_cmdline = kernel_cmdline;
    highbank_binfo.initrd_filename = initrd_filename;
    /* highbank requires a dtb in order to boot, and the dtb will override
     * the board ID. The following value is ignored, so set it to -1 to be
     * clear that the value is meaningless.
     */
    highbank_binfo.board_id = -1;
    highbank_binfo.nb_cpus = smp_cpus;
    highbank_binfo.loader_start = 0;
    highbank_binfo.write_secondary_boot = hb_write_secondary;
    highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary;
    arm_load_kernel(first_cpu, &highbank_binfo);
}

static QEMUMachine highbank_machine = {
    .name = "highbank",
    .desc = "Calxeda Highbank (ECX-1000)",
    .init = highbank_init,
    .use_scsi = 1,
    .max_cpus = 4,
};

static void highbank_machine_init(void)
{
    qemu_register_machine(&highbank_machine);
}

machine_init(highbank_machine_init);