From 85215d419b17aeedbfe93ff8d739b27937f72739 Mon Sep 17 00:00:00 2001 From: Blue Swirl Date: Sun, 15 Apr 2012 07:36:49 +0000 Subject: qtest: add register fuzzing to RTC test Reviewed-by: Anthony Liguori Signed-off-by: Blue Swirl --- tests/rtc-test.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'tests') diff --git a/tests/rtc-test.c b/tests/rtc-test.c index 983a980bab..f23ac3a6cf 100644 --- a/tests/rtc-test.c +++ b/tests/rtc-test.c @@ -240,6 +240,22 @@ static void alarm_time(void) g_assert(cmos_read(RTC_REG_C) == 0); } +/* success if no crash or abort */ +static void fuzz_registers(void) +{ + unsigned int i; + + for (i = 0; i < 1000; i++) { + uint8_t reg, val; + + reg = (uint8_t)g_test_rand_int_range(0, 16); + val = (uint8_t)g_test_rand_int_range(0, 256); + + cmos_write(reg, val); + cmos_read(reg); + } +} + int main(int argc, char **argv) { QTestState *s = NULL; @@ -253,6 +269,7 @@ int main(int argc, char **argv) qtest_add_func("/rtc/bcd/check-time", bcd_check_time); qtest_add_func("/rtc/dec/check-time", dec_check_time); qtest_add_func("/rtc/alarm-time", alarm_time); + qtest_add_func("/rtc/fuzz-registers", fuzz_registers); ret = g_test_run(); if (s) { -- cgit v1.2.3 From f91837a7f173e0334539024e4d8ba10c19a78bb7 Mon Sep 17 00:00:00 2001 From: Blue Swirl Date: Sun, 15 Apr 2012 11:45:18 +0000 Subject: qtest: add m48t59 tests for Sparc Add simple m48t59 qtests, enable test only for Sparc32 and Sparc64. On PPC, the device is behind PCI bus. Signed-off-by: Blue Swirl --- tests/Makefile | 3 + tests/m48t59-test.c | 259 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 262 insertions(+) create mode 100644 tests/m48t59-test.c (limited to 'tests') diff --git a/tests/Makefile b/tests/Makefile index baf1d70ee8..9988681293 100644 --- a/tests/Makefile +++ b/tests/Makefile @@ -20,6 +20,8 @@ check-block-$(CONFIG_POSIX) += tests/qemu-iotests-quick.sh # really in libqtest, not in the testcases themselves. check-qtest-i386-y = tests/rtc-test check-qtest-x86_64-y = $(check-qtest-i386-y) +check-qtest-sparc-y = tests/m48t59-test$(EXESUF) +check-qtest-sparc64-y = tests/m48t59-test$(EXESUF) GENERATED_HEADERS += tests/test-qapi-types.h tests/test-qapi-visit.h tests/test-qmp-commands.h @@ -64,6 +66,7 @@ tests/test-qmp-input-strict$(EXESUF): tests/test-qmp-input-strict.o $(test-qapi- tests/test-qmp-commands$(EXESUF): tests/test-qmp-commands.o tests/test-qmp-marshal.o $(test-qapi-obj-y) tests/rtc-test$(EXESUF): tests/rtc-test.o $(trace-obj-y) +tests/m48t59-test$(EXESUF): tests/m48t59-test.o $(trace-obj-y) # QTest rules diff --git a/tests/m48t59-test.c b/tests/m48t59-test.c new file mode 100644 index 0000000000..5179681ca5 --- /dev/null +++ b/tests/m48t59-test.c @@ -0,0 +1,259 @@ +/* + * QTest testcase for the M48T59 and M48T08 real-time clocks + * + * Based on MC146818 RTC test: + * Copyright IBM, Corp. 2012 + * + * Authors: + * Anthony Liguori + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ +#include "libqtest.h" + +#include +#include +#include +#include +#include + +#define RTC_SECONDS 0x9 +#define RTC_MINUTES 0xa +#define RTC_HOURS 0xb + +#define RTC_DAY_OF_WEEK 0xc +#define RTC_DAY_OF_MONTH 0xd +#define RTC_MONTH 0xe +#define RTC_YEAR 0xf + +static uint32_t base; +static uint16_t reg_base = 0x1ff0; /* 0x7f0 for m48t02 */ +static int base_year; +static bool use_mmio; + +static uint8_t cmos_read_mmio(uint8_t reg) +{ + uint8_t data; + + memread(base + (uint32_t)reg_base + (uint32_t)reg, &data, 1); + return data; +} + +static void cmos_write_mmio(uint8_t reg, uint8_t val) +{ + uint8_t data = val; + + memwrite(base + (uint32_t)reg_base + (uint32_t)reg, &data, 1); +} + +static uint8_t cmos_read_ioio(uint8_t reg) +{ + outw(base + 0, reg_base + (uint16_t)reg); + return inb(base + 3); +} + +static void cmos_write_ioio(uint8_t reg, uint8_t val) +{ + outw(base + 0, reg_base + (uint16_t)reg); + outb(base + 3, val); +} + +static uint8_t cmos_read(uint8_t reg) +{ + if (use_mmio) { + return cmos_read_mmio(reg); + } else { + return cmos_read_ioio(reg); + } +} + +static void cmos_write(uint8_t reg, uint8_t val) +{ + if (use_mmio) { + cmos_write_mmio(reg, val); + } else { + cmos_write_ioio(reg, val); + } +} + +static int bcd2dec(int value) +{ + return (((value >> 4) & 0x0F) * 10) + (value & 0x0F); +} + +static int tm_cmp(struct tm *lhs, struct tm *rhs) +{ + time_t a, b; + struct tm d1, d2; + + memcpy(&d1, lhs, sizeof(d1)); + memcpy(&d2, rhs, sizeof(d2)); + + a = mktime(&d1); + b = mktime(&d2); + + if (a < b) { + return -1; + } else if (a > b) { + return 1; + } + + return 0; +} + +#if 0 +static void print_tm(struct tm *tm) +{ + printf("%04d-%02d-%02d %02d:%02d:%02d %+02ld\n", + tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec, tm->tm_gmtoff); +} +#endif + +static void cmos_get_date_time(struct tm *date) +{ + int sec, min, hour, mday, mon, year; + time_t ts; + struct tm dummy; + + sec = cmos_read(RTC_SECONDS); + min = cmos_read(RTC_MINUTES); + hour = cmos_read(RTC_HOURS); + mday = cmos_read(RTC_DAY_OF_MONTH); + mon = cmos_read(RTC_MONTH); + year = cmos_read(RTC_YEAR); + + sec = bcd2dec(sec); + min = bcd2dec(min); + hour = bcd2dec(hour); + mday = bcd2dec(mday); + mon = bcd2dec(mon); + year = bcd2dec(year); + + ts = time(NULL); + localtime_r(&ts, &dummy); + + date->tm_isdst = dummy.tm_isdst; + date->tm_sec = sec; + date->tm_min = min; + date->tm_hour = hour; + date->tm_mday = mday; + date->tm_mon = mon - 1; + date->tm_year = base_year + year - 1900; + date->tm_gmtoff = 0; + + ts = mktime(date); +} + +static void check_time(int wiggle) +{ + struct tm start, date[4], end; + struct tm *datep; + time_t ts; + + /* + * This check assumes a few things. First, we cannot guarantee that we get + * a consistent reading from the wall clock because we may hit an edge of + * the clock while reading. To work around this, we read four clock readings + * such that at least two of them should match. We need to assume that one + * reading is corrupt so we need four readings to ensure that we have at + * least two consecutive identical readings + * + * It's also possible that we'll cross an edge reading the host clock so + * simply check to make sure that the clock reading is within the period of + * when we expect it to be. + */ + + ts = time(NULL); + gmtime_r(&ts, &start); + + cmos_get_date_time(&date[0]); + cmos_get_date_time(&date[1]); + cmos_get_date_time(&date[2]); + cmos_get_date_time(&date[3]); + + ts = time(NULL); + gmtime_r(&ts, &end); + + if (tm_cmp(&date[0], &date[1]) == 0) { + datep = &date[0]; + } else if (tm_cmp(&date[1], &date[2]) == 0) { + datep = &date[1]; + } else if (tm_cmp(&date[2], &date[3]) == 0) { + datep = &date[2]; + } else { + g_assert_not_reached(); + } + + if (!(tm_cmp(&start, datep) <= 0 && tm_cmp(datep, &end) <= 0)) { + long t, s; + + start.tm_isdst = datep->tm_isdst; + + t = (long)mktime(datep); + s = (long)mktime(&start); + if (t < s) { + g_test_message("RTC is %ld second(s) behind wall-clock\n", (s - t)); + } else { + g_test_message("RTC is %ld second(s) ahead of wall-clock\n", (t - s)); + } + + g_assert_cmpint(ABS(t - s), <=, wiggle); + } +} + +static int wiggle = 2; + +static void bcd_check_time(void) +{ + if (strcmp(qtest_get_arch(), "sparc64") == 0) { + base = 0x74; + base_year = 1900; + use_mmio = false; + } else if (strcmp(qtest_get_arch(), "sparc") == 0) { + base = 0x71200000; + base_year = 1968; + use_mmio = true; + } else { /* PPC: need to map macio in PCI */ + g_assert_not_reached(); + } + check_time(wiggle); +} + +/* success if no crash or abort */ +static void fuzz_registers(void) +{ + unsigned int i; + + for (i = 0; i < 1000; i++) { + uint8_t reg, val; + + reg = (uint8_t)g_test_rand_int_range(0, 16); + val = (uint8_t)g_test_rand_int_range(0, 256); + + cmos_write(reg, val); + cmos_read(reg); + } +} + +int main(int argc, char **argv) +{ + QTestState *s = NULL; + int ret; + + g_test_init(&argc, &argv, NULL); + + s = qtest_start("-display none -rtc clock=vm"); + + qtest_add_func("/rtc/bcd/check-time", bcd_check_time); + qtest_add_func("/rtc/fuzz-registers", fuzz_registers); + ret = g_test_run(); + + if (s) { + qtest_quit(s); + } + + return ret; +} -- cgit v1.2.3 From 536a98d4d66444437e01ff2920df1a554df15efb Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 16 Apr 2012 01:47:07 +0400 Subject: target-xtensa: add tests for LOOPNEZ and LOOPGTZ Signed-off-by: Max Filippov Signed-off-by: Blue Swirl --- tests/tcg/xtensa/test_loop.S | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'tests') diff --git a/tests/tcg/xtensa/test_loop.S b/tests/tcg/xtensa/test_loop.S index 5cead47a27..1c240e8e9b 100644 --- a/tests/tcg/xtensa/test_loop.S +++ b/tests/tcg/xtensa/test_loop.S @@ -124,4 +124,40 @@ test lend_invalidation assert eqi, a2, 7 test_end +test loopnez + movi a2, 0 + movi a3, 5 + loopnez a3, 1f + addi a2, a2, 1 +1: + assert eqi, a2, 5 + + movi a2, 0 + movi a3, 0 + loopnez a3, 1f + test_fail +1: +test_end + +test loopgtz + movi a2, 0 + movi a3, 5 + loopgtz a3, 1f + addi a2, a2, 1 +1: + assert eqi, a2, 5 + + movi a2, 0 + movi a3, 0 + loopgtz a3, 1f + test_fail +1: + + movi a2, 0 + movi a3, 0x80000000 + loopgtz a3, 1f + test_fail +1: +test_end + test_suite_end -- cgit v1.2.3