From b4a738bf93c3137b92d532e59d60edccc4e1ea96 Mon Sep 17 00:00:00 2001
From: Anthony Liguori <aliguori@us.ibm.com>
Date: Wed, 22 Aug 2012 15:22:05 -0500
Subject: boards: add a 'none' machine type to all platforms

This allows any QEMU binary to be executed with:

  $QEMU_BINARY -M none -qmp stdio

Without errors from missing options that are required by various boards.  This
also provides a mode that we can use in the future to construct machines
entirely through QMP commands.

Cc: Daniel Berrange <berrange@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
 hw/Makefile.objs | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 7f57ed58e2..6dfebd2978 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -134,6 +134,8 @@ hw-obj-$(CONFIG_DP8393X) += dp8393x.o
 hw-obj-$(CONFIG_DS1225Y) += ds1225y.o
 hw-obj-$(CONFIG_MIPSNET) += mipsnet.o
 
+hw-obj-y += null-machine.o
+
 # Sound
 sound-obj-y =
 sound-obj-$(CONFIG_SB16) += sb16.o
-- 
cgit v1.2.3


From 92e1fb5ed1a26d09ee754845d5691d473410c1dc Mon Sep 17 00:00:00 2001
From: Alex Williamson <alex.williamson@redhat.com>
Date: Wed, 26 Sep 2012 11:19:39 -0600
Subject: vfio: Enable vfio-pci and mark supported

Enabled for all softmmu guests supporting PCI on Linux hosts.  Note
that currently only x86 hosts have the kernel side VFIO IOMMU support
for this.  PPC (g3beige) is the only non-x86 guest known to work.
ARM (veratile) hangs in firmware, others untested.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
 hw/Makefile.objs | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 6dfebd2978..ecdbe44ddd 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -198,7 +198,8 @@ obj-$(CONFIG_VGA) += vga.o
 obj-$(CONFIG_SOFTMMU) += device-hotplug.o
 obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o
 
-# Inter-VM PCI shared memory
+# Inter-VM PCI shared memory & VFIO PCI device assignment
 ifeq ($(CONFIG_PCI), y)
 obj-$(CONFIG_KVM) += ivshmem.o
+obj-$(CONFIG_LINUX) += vfio_pci.o
 endif
-- 
cgit v1.2.3


From c9159fe9aa9abe24115ea4d16127179e9cb07e22 Mon Sep 17 00:00:00 2001
From: Stefan Weil <sw@weilnetz.de>
Date: Fri, 5 Oct 2012 19:39:33 +0200
Subject: Remove libhw

The entries for libhw* are no longer needed in .gitignore.

There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
 hw/Makefile.objs | 226 +++++++++++++++++++++++++++----------------------------
 1 file changed, 113 insertions(+), 113 deletions(-)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index ecdbe44ddd..b59c74953f 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -1,140 +1,140 @@
-hw-obj-y = usb/ ide/
-hw-obj-y += loader.o
-hw-obj-$(CONFIG_VIRTIO) += virtio-console.o
-hw-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
-hw-obj-y += fw_cfg.o
-hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o pci_bridge_dev.o
-hw-obj-$(CONFIG_PCI) += msix.o msi.o
-hw-obj-$(CONFIG_PCI) += shpc.o
-hw-obj-$(CONFIG_PCI) += slotid_cap.o
-hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
-hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
-hw-obj-y += watchdog.o
-hw-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
-hw-obj-$(CONFIG_ECC) += ecc.o
-hw-obj-$(CONFIG_NAND) += nand.o
-hw-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o
-hw-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o
-
-hw-obj-$(CONFIG_M48T59) += m48t59.o
-hw-obj-$(CONFIG_ESCC) += escc.o
-hw-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
-
-hw-obj-$(CONFIG_SERIAL) += serial.o
-hw-obj-$(CONFIG_PARALLEL) += parallel.o
-hw-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
-hw-obj-$(CONFIG_PCSPK) += pcspk.o
-hw-obj-$(CONFIG_PCKBD) += pckbd.o
-hw-obj-$(CONFIG_FDC) += fdc.o
-hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
-hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o
-hw-obj-$(CONFIG_DMA) += dma.o
-hw-obj-$(CONFIG_I82374) += i82374.o
-hw-obj-$(CONFIG_HPET) += hpet.o
-hw-obj-$(CONFIG_APPLESMC) += applesmc.o
-hw-obj-$(CONFIG_SMARTCARD) += ccid-card-passthru.o
-hw-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
-hw-obj-$(CONFIG_I8259) += i8259_common.o i8259.o
+common-obj-y = usb/ ide/
+common-obj-y += loader.o
+common-obj-$(CONFIG_VIRTIO) += virtio-console.o
+common-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
+common-obj-y += fw_cfg.o
+common-obj-$(CONFIG_PCI) += pci.o pci_bridge.o pci_bridge_dev.o
+common-obj-$(CONFIG_PCI) += msix.o msi.o
+common-obj-$(CONFIG_PCI) += shpc.o
+common-obj-$(CONFIG_PCI) += slotid_cap.o
+common-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
+common-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
+common-obj-y += watchdog.o
+common-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
+common-obj-$(CONFIG_ECC) += ecc.o
+common-obj-$(CONFIG_NAND) += nand.o
+common-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o
+common-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o
+
+common-obj-$(CONFIG_M48T59) += m48t59.o
+common-obj-$(CONFIG_ESCC) += escc.o
+common-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
+
+common-obj-$(CONFIG_SERIAL) += serial.o
+common-obj-$(CONFIG_PARALLEL) += parallel.o
+common-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
+common-obj-$(CONFIG_PCSPK) += pcspk.o
+common-obj-$(CONFIG_PCKBD) += pckbd.o
+common-obj-$(CONFIG_FDC) += fdc.o
+common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
+common-obj-$(CONFIG_APM) += pm_smbus.o apm.o
+common-obj-$(CONFIG_DMA) += dma.o
+common-obj-$(CONFIG_I82374) += i82374.o
+common-obj-$(CONFIG_HPET) += hpet.o
+common-obj-$(CONFIG_APPLESMC) += applesmc.o
+common-obj-$(CONFIG_SMARTCARD) += ccid-card-passthru.o
+common-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
+common-obj-$(CONFIG_I8259) += i8259_common.o i8259.o
 
 # PPC devices
-hw-obj-$(CONFIG_PREP_PCI) += prep_pci.o
-hw-obj-$(CONFIG_I82378) += i82378.o
+common-obj-$(CONFIG_PREP_PCI) += prep_pci.o
+common-obj-$(CONFIG_I82378) += i82378.o
 # Mac shared devices
-hw-obj-$(CONFIG_MACIO) += macio.o
-hw-obj-$(CONFIG_CUDA) += cuda.o
-hw-obj-$(CONFIG_ADB) += adb.o
-hw-obj-$(CONFIG_MAC_NVRAM) += mac_nvram.o
-hw-obj-$(CONFIG_MAC_DBDMA) += mac_dbdma.o
+common-obj-$(CONFIG_MACIO) += macio.o
+common-obj-$(CONFIG_CUDA) += cuda.o
+common-obj-$(CONFIG_ADB) += adb.o
+common-obj-$(CONFIG_MAC_NVRAM) += mac_nvram.o
+common-obj-$(CONFIG_MAC_DBDMA) += mac_dbdma.o
 # OldWorld PowerMac
-hw-obj-$(CONFIG_HEATHROW_PIC) += heathrow_pic.o
-hw-obj-$(CONFIG_GRACKLE_PCI) += grackle_pci.o
+common-obj-$(CONFIG_HEATHROW_PIC) += heathrow_pic.o
+common-obj-$(CONFIG_GRACKLE_PCI) += grackle_pci.o
 # NewWorld PowerMac
-hw-obj-$(CONFIG_UNIN_PCI) += unin_pci.o
-hw-obj-$(CONFIG_DEC_PCI) += dec_pci.o
+common-obj-$(CONFIG_UNIN_PCI) += unin_pci.o
+common-obj-$(CONFIG_DEC_PCI) += dec_pci.o
 # PowerPC E500 boards
-hw-obj-$(CONFIG_PPCE500_PCI) += ppce500_pci.o
+common-obj-$(CONFIG_PPCE500_PCI) += ppce500_pci.o
 
 # MIPS devices
-hw-obj-$(CONFIG_PIIX4) += piix4.o
-hw-obj-$(CONFIG_G364FB) += g364fb.o
-hw-obj-$(CONFIG_JAZZ_LED) += jazz_led.o
+common-obj-$(CONFIG_PIIX4) += piix4.o
+common-obj-$(CONFIG_G364FB) += g364fb.o
+common-obj-$(CONFIG_JAZZ_LED) += jazz_led.o
 
 # Xilinx devices
-hw-obj-$(CONFIG_XILINX) += xilinx_intc.o
-hw-obj-$(CONFIG_XILINX) += xilinx_timer.o
-hw-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
-hw-obj-$(CONFIG_XILINX_AXI) += xilinx_axidma.o
-hw-obj-$(CONFIG_XILINX_AXI) += xilinx_axienet.o
-hw-obj-$(CONFIG_XILINX_AXI) += stream.o
+common-obj-$(CONFIG_XILINX) += xilinx_intc.o
+common-obj-$(CONFIG_XILINX) += xilinx_timer.o
+common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
+common-obj-$(CONFIG_XILINX_AXI) += xilinx_axidma.o
+common-obj-$(CONFIG_XILINX_AXI) += xilinx_axienet.o
+common-obj-$(CONFIG_XILINX_AXI) += stream.o
 
 # PKUnity SoC devices
-hw-obj-$(CONFIG_PUV3) += puv3_intc.o
-hw-obj-$(CONFIG_PUV3) += puv3_ost.o
-hw-obj-$(CONFIG_PUV3) += puv3_gpio.o
-hw-obj-$(CONFIG_PUV3) += puv3_pm.o
-hw-obj-$(CONFIG_PUV3) += puv3_dma.o
+common-obj-$(CONFIG_PUV3) += puv3_intc.o
+common-obj-$(CONFIG_PUV3) += puv3_ost.o
+common-obj-$(CONFIG_PUV3) += puv3_gpio.o
+common-obj-$(CONFIG_PUV3) += puv3_pm.o
+common-obj-$(CONFIG_PUV3) += puv3_dma.o
 
 # ARM devices
-hw-obj-$(CONFIG_ARM_TIMER) += arm_timer.o
-hw-obj-$(CONFIG_PL011) += pl011.o
-hw-obj-$(CONFIG_PL022) += pl022.o
-hw-obj-$(CONFIG_PL031) += pl031.o
-hw-obj-$(CONFIG_PL041) += pl041.o lm4549.o
-hw-obj-$(CONFIG_PL050) += pl050.o
-hw-obj-$(CONFIG_PL061) += pl061.o
-hw-obj-$(CONFIG_PL080) += pl080.o
-hw-obj-$(CONFIG_PL110) += pl110.o
-hw-obj-$(CONFIG_PL181) += pl181.o
-hw-obj-$(CONFIG_PL190) += pl190.o
-hw-obj-$(CONFIG_PL310) += arm_l2x0.o
-hw-obj-$(CONFIG_VERSATILE_PCI) += versatile_pci.o
-hw-obj-$(CONFIG_VERSATILE_I2C) += versatile_i2c.o
-hw-obj-$(CONFIG_CADENCE) += cadence_uart.o
-hw-obj-$(CONFIG_CADENCE) += cadence_ttc.o
-hw-obj-$(CONFIG_CADENCE) += cadence_gem.o
-hw-obj-$(CONFIG_XGMAC) += xgmac.o
+common-obj-$(CONFIG_ARM_TIMER) += arm_timer.o
+common-obj-$(CONFIG_PL011) += pl011.o
+common-obj-$(CONFIG_PL022) += pl022.o
+common-obj-$(CONFIG_PL031) += pl031.o
+common-obj-$(CONFIG_PL041) += pl041.o lm4549.o
+common-obj-$(CONFIG_PL050) += pl050.o
+common-obj-$(CONFIG_PL061) += pl061.o
+common-obj-$(CONFIG_PL080) += pl080.o
+common-obj-$(CONFIG_PL110) += pl110.o
+common-obj-$(CONFIG_PL181) += pl181.o
+common-obj-$(CONFIG_PL190) += pl190.o
+common-obj-$(CONFIG_PL310) += arm_l2x0.o
+common-obj-$(CONFIG_VERSATILE_PCI) += versatile_pci.o
+common-obj-$(CONFIG_VERSATILE_I2C) += versatile_i2c.o
+common-obj-$(CONFIG_CADENCE) += cadence_uart.o
+common-obj-$(CONFIG_CADENCE) += cadence_ttc.o
+common-obj-$(CONFIG_CADENCE) += cadence_gem.o
+common-obj-$(CONFIG_XGMAC) += xgmac.o
 
 # PCI watchdog devices
-hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o
+common-obj-$(CONFIG_PCI) += wdt_i6300esb.o
 
-hw-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o
+common-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o
 
 # PCI network cards
-hw-obj-$(CONFIG_NE2000_PCI) += ne2000.o
-hw-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
-hw-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
-hw-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
-hw-obj-$(CONFIG_E1000_PCI) += e1000.o
-hw-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
-
-hw-obj-$(CONFIG_SMC91C111) += smc91c111.o
-hw-obj-$(CONFIG_LAN9118) += lan9118.o
-hw-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o
-hw-obj-$(CONFIG_OPENCORES_ETH) += opencores_eth.o
+common-obj-$(CONFIG_NE2000_PCI) += ne2000.o
+common-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
+common-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
+common-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
+common-obj-$(CONFIG_E1000_PCI) += e1000.o
+common-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
+
+common-obj-$(CONFIG_SMC91C111) += smc91c111.o
+common-obj-$(CONFIG_LAN9118) += lan9118.o
+common-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o
+common-obj-$(CONFIG_OPENCORES_ETH) += opencores_eth.o
 
 # SCSI layer
-hw-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o
-hw-obj-$(CONFIG_MEGASAS_SCSI_PCI) += megasas.o
-hw-obj-$(CONFIG_ESP) += esp.o
-hw-obj-$(CONFIG_ESP_PCI) += esp-pci.o
+common-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o
+common-obj-$(CONFIG_MEGASAS_SCSI_PCI) += megasas.o
+common-obj-$(CONFIG_ESP) += esp.o
+common-obj-$(CONFIG_ESP_PCI) += esp-pci.o
 
-hw-obj-y += sysbus.o isa-bus.o
-hw-obj-y += qdev-addr.o
+common-obj-y += sysbus.o isa-bus.o
+common-obj-y += qdev-addr.o
 
 # VGA
-hw-obj-$(CONFIG_VGA_PCI) += vga-pci.o
-hw-obj-$(CONFIG_VGA_ISA) += vga-isa.o
-hw-obj-$(CONFIG_VGA_ISA_MM) += vga-isa-mm.o
-hw-obj-$(CONFIG_VMWARE_VGA) += vmware_vga.o
-hw-obj-$(CONFIG_VMMOUSE) += vmmouse.o
-hw-obj-$(CONFIG_VGA_CIRRUS) += cirrus_vga.o
+common-obj-$(CONFIG_VGA_PCI) += vga-pci.o
+common-obj-$(CONFIG_VGA_ISA) += vga-isa.o
+common-obj-$(CONFIG_VGA_ISA_MM) += vga-isa-mm.o
+common-obj-$(CONFIG_VMWARE_VGA) += vmware_vga.o
+common-obj-$(CONFIG_VMMOUSE) += vmmouse.o
+common-obj-$(CONFIG_VGA_CIRRUS) += cirrus_vga.o
 
-hw-obj-$(CONFIG_RC4030) += rc4030.o
-hw-obj-$(CONFIG_DP8393X) += dp8393x.o
-hw-obj-$(CONFIG_DS1225Y) += ds1225y.o
-hw-obj-$(CONFIG_MIPSNET) += mipsnet.o
+common-obj-$(CONFIG_RC4030) += rc4030.o
+common-obj-$(CONFIG_DP8393X) += dp8393x.o
+common-obj-$(CONFIG_DS1225Y) += ds1225y.o
+common-obj-$(CONFIG_MIPSNET) += mipsnet.o
 
-hw-obj-y += null-machine.o
+common-obj-y += null-machine.o
 
 # Sound
 sound-obj-y =
@@ -148,9 +148,9 @@ sound-obj-$(CONFIG_HDA) += intel-hda.o hda-audio.o
 
 $(obj)/adlib.o $(obj)/fmopl.o: QEMU_CFLAGS += -DBUILD_Y8950=0
 
-hw-obj-$(CONFIG_SOUND) += $(sound-obj-y)
+common-obj-$(CONFIG_SOUND) += $(sound-obj-y)
 
-hw-obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/
+common-obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/
 
 common-obj-y += usb/
 common-obj-y += irq.o
-- 
cgit v1.2.3


From a3578d4a51250365fb7f048e8154942a2659cc4a Mon Sep 17 00:00:00 2001
From: "Peter A. G. Crosthwaite" <peter.crosthwaite@petalogix.com>
Date: Wed, 1 Aug 2012 20:26:12 +1000
Subject: hw: Added generic FIFO API.

Added a FIFO API that can be used to create and operate byte FIFOs.

Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
---
 hw/Makefile.objs | 1 +
 1 file changed, 1 insertion(+)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index b59c74953f..66abbb2c7e 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -35,6 +35,7 @@ common-obj-$(CONFIG_APPLESMC) += applesmc.o
 common-obj-$(CONFIG_SMARTCARD) += ccid-card-passthru.o
 common-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
 common-obj-$(CONFIG_I8259) += i8259_common.o i8259.o
+common-obj-y += fifo.o
 
 # PPC devices
 common-obj-$(CONFIG_PREP_PCI) += prep_pci.o
-- 
cgit v1.2.3


From 82a2499011a73bcafab723e1bab4127e55a64844 Mon Sep 17 00:00:00 2001
From: "Peter A. G. Crosthwaite" <peter.crosthwaite@petalogix.com>
Date: Mon, 26 Mar 2012 22:10:59 +1000
Subject: m25p80: Initial implementation of SPI flash device

Added device model for m25p80 style SPI flash family.

Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
---
 hw/Makefile.objs | 1 +
 1 file changed, 1 insertion(+)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 66abbb2c7e..854faa9b5b 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -174,6 +174,7 @@ common-obj-y += scsi-disk.o cdrom.o hd-geometry.o block-common.o
 common-obj-y += scsi-generic.o scsi-bus.o
 common-obj-y += hid.o
 common-obj-$(CONFIG_SSI) += ssi.o
+common-obj-$(CONFIG_SSI_M25P80) += m25p80.o
 common-obj-$(CONFIG_SSI_SD) += ssi-sd.o
 common-obj-$(CONFIG_SD) += sd.o
 common-obj-y += bt.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o
-- 
cgit v1.2.3


From 488cb996cd8d8eaa5ecfdc6ba5f6cbd23a13271b Mon Sep 17 00:00:00 2001
From: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed, 17 Oct 2012 09:54:19 +0200
Subject: serial: split serial.c

Split serial.c into serial.c, serial.h and serial-isa.c.  While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h.  The latter leads to s/pc.h/serial.h/ in tons of
boards which just want the serial bits from pc.h

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
 hw/Makefile.objs | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 854faa9b5b..16e7a1e6f3 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -20,7 +20,7 @@ common-obj-$(CONFIG_M48T59) += m48t59.o
 common-obj-$(CONFIG_ESCC) += escc.o
 common-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
 
-common-obj-$(CONFIG_SERIAL) += serial.o
+common-obj-$(CONFIG_SERIAL) += serial.o serial-isa.o
 common-obj-$(CONFIG_PARALLEL) += parallel.o
 common-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
 common-obj-$(CONFIG_PCSPK) += pcspk.o
-- 
cgit v1.2.3


From 419ad67208a37367932a5bf88d3860f85e06282c Mon Sep 17 00:00:00 2001
From: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed, 17 Oct 2012 09:54:20 +0200
Subject: serial: add pci variant

So we get a hot-pluggable 16550 uart.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
 hw/Makefile.objs | 1 +
 1 file changed, 1 insertion(+)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 16e7a1e6f3..af4ab0c735 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -21,6 +21,7 @@ common-obj-$(CONFIG_ESCC) += escc.o
 common-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
 
 common-obj-$(CONFIG_SERIAL) += serial.o serial-isa.o
+common-obj-$(CONFIG_SERIAL_PCI) += serial-pci.o
 common-obj-$(CONFIG_PARALLEL) += parallel.o
 common-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
 common-obj-$(CONFIG_PCSPK) += pcspk.o
-- 
cgit v1.2.3


From 16c915ba42b45df7a64a6908287f03bfa3764bed Mon Sep 17 00:00:00 2001
From: Amit Shah <amit.shah@redhat.com>
Date: Wed, 20 Jun 2012 12:29:32 +0530
Subject: virtio-rng: hardware random number generator device

The Linux kernel already has a virtio-rng driver, this is the device
implementation.

When the guest asks for entropy from the virtio hwrng, it puts a buffer
in the vq.  We then put entropy into that buffer, and push it back to
the guest.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
aliguori: converted to new RngBackend interface
aliguori: remove entropy needed event
aliguori: fix migration
---
 hw/Makefile.objs | 1 +
 1 file changed, 1 insertion(+)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index af4ab0c735..ea46f8128e 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -1,6 +1,7 @@
 common-obj-y = usb/ ide/
 common-obj-y += loader.o
 common-obj-$(CONFIG_VIRTIO) += virtio-console.o
+common-obj-$(CONFIG_VIRTIO) += virtio-rng.o
 common-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
 common-obj-y += fw_cfg.o
 common-obj-$(CONFIG_PCI) += pci.o pci_bridge.o pci_bridge_dev.o
-- 
cgit v1.2.3


From 410edd922d2a90c79cd92b086c0e53650ea52c02 Mon Sep 17 00:00:00 2001
From: Isaku Yamahata <yamahata@valinux.co.jp>
Date: Wed, 14 Nov 2012 15:54:02 -0500
Subject: pc/piix_pci: factor out smram/pam logic

Factor out smram/pam logic for use by other chipsets, namely q35
at this point.

Note: Should be factored out into a generic North Bridge Class.

[jbaron@redhat.com: changes for updated memory API]
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
 hw/Makefile.objs | 1 +
 1 file changed, 1 insertion(+)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index ea46f8128e..5ebe6afd91 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -38,6 +38,7 @@ common-obj-$(CONFIG_SMARTCARD) += ccid-card-passthru.o
 common-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
 common-obj-$(CONFIG_I8259) += i8259_common.o i8259.o
 common-obj-y += fifo.o
+common-obj-y += pam.o
 
 # PPC devices
 common-obj-$(CONFIG_PREP_PCI) += prep_pci.o
-- 
cgit v1.2.3


From e516572fdefdf1168e890d1fd79d56cd44aa2102 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Thu, 22 Nov 2012 22:05:06 -0500
Subject: ich9: Add acpi support and definitions

Lay the groundwork for subsequent ich9 support.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
 hw/Makefile.objs | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 5ebe6afd91..b863b3145a 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -28,7 +28,7 @@ common-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
 common-obj-$(CONFIG_PCSPK) += pcspk.o
 common-obj-$(CONFIG_PCKBD) += pckbd.o
 common-obj-$(CONFIG_FDC) += fdc.o
-common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
+common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o acpi_ich9.o
 common-obj-$(CONFIG_APM) += pm_smbus.o apm.o
 common-obj-$(CONFIG_DMA) += dma.o
 common-obj-$(CONFIG_I82374) += i82374.o
-- 
cgit v1.2.3


From 678e7b94b182f846de61e38e8a6499f9c55dbcf0 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Thu, 22 Nov 2012 22:06:42 -0500
Subject: ich9: Add smbus

Add support for the ich9 smbus chip.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
 hw/Makefile.objs | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index b863b3145a..35773de1e6 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -28,7 +28,7 @@ common-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
 common-obj-$(CONFIG_PCSPK) += pcspk.o
 common-obj-$(CONFIG_PCKBD) += pckbd.o
 common-obj-$(CONFIG_FDC) += fdc.o
-common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o acpi_ich9.o
+common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o acpi_ich9.o smbus_ich9.o
 common-obj-$(CONFIG_APM) += pm_smbus.o apm.o
 common-obj-$(CONFIG_DMA) += dma.o
 common-obj-$(CONFIG_I82374) += i82374.o
-- 
cgit v1.2.3


From a1c9304683161a68c1fc1d9c3bc174ec8e26a61a Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Wed, 14 Nov 2012 15:54:07 -0500
Subject: ich9: Add i82801b11 dmi-to-pci bridge

Add the dmi-to-pci i82801b11 bridge chip. This is the pci bridge chip
that q35 uses on its host bus for PCI bus arbitration.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
 hw/Makefile.objs | 1 +
 1 file changed, 1 insertion(+)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 35773de1e6..d581d8d6d6 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -10,6 +10,7 @@ common-obj-$(CONFIG_PCI) += shpc.o
 common-obj-$(CONFIG_PCI) += slotid_cap.o
 common-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
 common-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
+common-obj-$(CONFIG_PCI) += i82801b11.o
 common-obj-y += watchdog.o
 common-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
 common-obj-$(CONFIG_ECC) += ecc.o
-- 
cgit v1.2.3


From 315a1350c4a386065a73aad2ded1a11d77bf7771 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Wed, 12 Dec 2012 13:32:14 +0200
Subject: pci: move pci core code to hw/pci

Move files and modify makefiles to pick them at the
new location.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/Makefile.objs | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index d581d8d6d6..9d33b189e6 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -1,14 +1,10 @@
-common-obj-y = usb/ ide/
+common-obj-y = usb/ ide/ pci/
 common-obj-y += loader.o
 common-obj-$(CONFIG_VIRTIO) += virtio-console.o
 common-obj-$(CONFIG_VIRTIO) += virtio-rng.o
 common-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
 common-obj-y += fw_cfg.o
-common-obj-$(CONFIG_PCI) += pci.o pci_bridge.o pci_bridge_dev.o
-common-obj-$(CONFIG_PCI) += msix.o msi.o
-common-obj-$(CONFIG_PCI) += shpc.o
-common-obj-$(CONFIG_PCI) += slotid_cap.o
-common-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
+common-obj-$(CONFIG_PCI) += pci_bridge_dev.o
 common-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
 common-obj-$(CONFIG_PCI) += i82801b11.o
 common-obj-y += watchdog.o
@@ -102,8 +98,6 @@ common-obj-$(CONFIG_XGMAC) += xgmac.o
 # PCI watchdog devices
 common-obj-$(CONFIG_PCI) += wdt_i6300esb.o
 
-common-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o
-
 # PCI network cards
 common-obj-$(CONFIG_NE2000_PCI) += ne2000.o
 common-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
@@ -199,7 +193,6 @@ obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o virtio-scsi.o
 obj-$(CONFIG_SOFTMMU) += vhost_net.o
 obj-$(CONFIG_VHOST_NET) += vhost.o
 obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/
-obj-$(CONFIG_NO_PCI) += pci-stub.o
 obj-$(CONFIG_VGA) += vga.o
 obj-$(CONFIG_SOFTMMU) += device-hotplug.o
 obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o
-- 
cgit v1.2.3


From 525877c9992a07d424be4cfdd4ba13a69141a513 Mon Sep 17 00:00:00 2001
From: Paolo Bonzini <pbonzini@redhat.com>
Date: Mon, 17 Sep 2012 08:35:53 +0200
Subject: build: move rules from Makefile to */Makefile.objs

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/Makefile.objs | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index bcf278d4ec..2778035b1c 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -204,3 +204,5 @@ ifeq ($(CONFIG_PCI), y)
 obj-$(CONFIG_KVM) += ivshmem.o
 obj-$(CONFIG_LINUX) += vfio_pci.o
 endif
+
+$(obj)/baum.o: QEMU_CFLAGS += $(SDL_CFLAGS) 
-- 
cgit v1.2.3


From a404b61244ff555ace0a1360fc22275fbeda503e Mon Sep 17 00:00:00 2001
From: Eduardo Habkost <ehabkost@redhat.com>
Date: Wed, 5 Dec 2012 14:49:11 -0200
Subject: qdev-properties.c: Separate core from the code used only by
 qemu-system-*
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This separates the qdev properties code in two parts:
 - qdev-properties.c, that contains most of the qdev properties code;
 - qdev-properties-system.c for code specific for qemu-system-*,
   containing:
   - Property types: drive, chr, netdev, vlan, that depend on code that
     won't be included on *-user
   - qemu_add_globals(), that depends on qemu-config.o.

This change should help on two things:
 - Allowing DeviceState to be used by *-user without pulling
   dependencies that are specific for qemu-system-*;
 - Writing qdev unit tests without pulling too many dependencies.

The copyright/license of qdev-properties.c isn't explicitly stated at
the file, so add a simple copyright/license header pointing to the
commit ID of the original file.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 hw/Makefile.objs | 1 +
 1 file changed, 1 insertion(+)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index d581d8d6d6..96a8365349 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -185,6 +185,7 @@ common-obj-y += bt.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o
 common-obj-y += bt-hci-csr.o
 common-obj-y += msmouse.o ps2.o
 common-obj-y += qdev.o qdev-properties.o qdev-monitor.o
+common-obj-y += qdev-properties-system.o
 common-obj-$(CONFIG_BRLAPI) += baum.o
 
 # xen backend driver support
-- 
cgit v1.2.3


From 185ecf40e3589fc2717b0856ee1df05dd63a46dd Mon Sep 17 00:00:00 2001
From: Stefan Hajnoczi <stefanha@redhat.com>
Date: Tue, 20 Nov 2012 10:30:08 +0100
Subject: dataplane: add host memory mapping code

The data plane thread needs to map guest physical addresses to host
pointers.  Normally this is done with cpu_physical_memory_map() but the
function assumes the global mutex is held.  The data plane thread does
not touch the global mutex and therefore needs a thread-safe memory
mapping mechanism.

Hostmem registers a MemoryListener similar to how vhost collects and
pushes memory region information into the kernel.  There is a
fine-grained lock on the regions list which is held during lookup and
when installing a new regions list.

When the physical memory map changes the MemoryListener callbacks are
invoked.  They build up a new list of memory regions which is finally
installed when the list has been completed.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/Makefile.objs | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index d75f2f0bd7..5ac49134bd 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -1,4 +1,4 @@
-common-obj-y = usb/ ide/ pci/
+common-obj-y = usb/ ide/ pci/ dataplane/
 common-obj-y += loader.o
 common-obj-$(CONFIG_VIRTIO) += virtio-console.o
 common-obj-$(CONFIG_VIRTIO) += virtio-rng.o
-- 
cgit v1.2.3


From ef4929fb3c25e03deca76c7f5d22fba08edf864f Mon Sep 17 00:00:00 2001
From: Stefan Hajnoczi <stefanha@redhat.com>
Date: Thu, 3 Jan 2013 11:56:16 +0100
Subject: dataplane: use linux-headers/ for virtio includes

The hw/dataplane/vring.c code includes linux/virtio_ring.h.  Ensure that
we use linux-headers/ instead of the system-wide headers, which may be
out-of-date on older distros.

This resolves the following build error on Debian 6:

  CC    hw/dataplane/vring.o
cc1: warnings being treated as errors
hw/dataplane/vring.c: In function 'vring_enable_notification':
hw/dataplane/vring.c:71: error: implicit declaration of function 'vring_avail_event'
hw/dataplane/vring.c:71: error: nested extern declaration of 'vring_avail_event'
hw/dataplane/vring.c:71: error: lvalue required as left operand of assignment

Note that we now build dataplane/ for each target instead of only once.
There is no way around this since linux-headers/ is only available for
per-target objects - and it's how virtio, vfio, kvm, and friends are
built.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
 hw/Makefile.objs | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 5ac49134bd..b8bbed39c1 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -1,4 +1,4 @@
-common-obj-y = usb/ ide/ pci/ dataplane/
+common-obj-y = usb/ ide/ pci/
 common-obj-y += loader.o
 common-obj-$(CONFIG_VIRTIO) += virtio-console.o
 common-obj-$(CONFIG_VIRTIO) += virtio-rng.o
@@ -191,6 +191,7 @@ common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o xenfb.o xen_disk.o xen_nic.o
 # Per-target files
 # virtio has to be here due to weird dependency between PCI and virtio-net.
 # need to fix this properly
+obj-$(CONFIG_VIRTIO) += dataplane/
 obj-$(CONFIG_VIRTIO) += virtio.o virtio-blk.o virtio-balloon.o virtio-net.o
 obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o virtio-scsi.o
 obj-$(CONFIG_SOFTMMU) += vhost_net.o
-- 
cgit v1.2.3


From 507066f8a9610c0088df19ce7b3e436f43165ec1 Mon Sep 17 00:00:00 2001
From: Eduardo Habkost <ehabkost@redhat.com>
Date: Wed, 5 Dec 2012 14:49:12 -0200
Subject: qdev: Include qdev code into *-user, too
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The code depends on some functions from qemu-option.o, so add
qemu-option.o to universal-obj-y to make sure it's included.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 hw/Makefile.objs | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'hw/Makefile.objs')

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index b8bbed39c1..6b8a68c504 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -1,3 +1,9 @@
+# core qdev-related obj files, also used by *-user:
+hw-core-obj-y += qdev.o qdev-properties.o
+# irq.o needed for qdev GPIO handling:
+hw-core-obj-y += irq.o
+
+
 common-obj-y = usb/ ide/ pci/
 common-obj-y += loader.o
 common-obj-$(CONFIG_VIRTIO) += virtio-console.o
@@ -154,7 +160,6 @@ common-obj-$(CONFIG_SOUND) += $(sound-obj-y)
 common-obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/
 
 common-obj-y += usb/
-common-obj-y += irq.o
 common-obj-$(CONFIG_PTIMER) += ptimer.o
 common-obj-$(CONFIG_MAX7310) += max7310.o
 common-obj-$(CONFIG_WM8750) += wm8750.o
@@ -180,7 +185,7 @@ common-obj-$(CONFIG_SD) += sd.o
 common-obj-y += bt.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o
 common-obj-y += bt-hci-csr.o
 common-obj-y += msmouse.o ps2.o
-common-obj-y += qdev.o qdev-properties.o qdev-monitor.o
+common-obj-y += qdev-monitor.o
 common-obj-y += qdev-properties-system.o
 common-obj-$(CONFIG_BRLAPI) += baum.o
 
-- 
cgit v1.2.3