From 77fef8c148e4bec1d1089b3729bd32efdbd3a6c0 Mon Sep 17 00:00:00 2001 From: bellard Date: Mon, 16 Feb 2004 22:05:46 +0000 Subject: experimental code copy support - added new Linux kernel loader git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@620 c046a42c-6fe2-441c-8c8c-71466251a162 --- vl.c | 352 +++++++++++++++++++++++-------------------------------------------- vl.h | 2 +- 2 files changed, 122 insertions(+), 232 deletions(-) diff --git a/vl.c b/vl.c index 0c1f839d7b..99a9fc4a13 100644 --- a/vl.c +++ b/vl.c @@ -78,7 +78,6 @@ //#define DEBUG_SERIAL -#define PHYS_RAM_BASE 0xac000000 #if !defined(CONFIG_SOFTMMU) #define PHYS_RAM_MAX_SIZE (256 * 1024 * 1024) #else @@ -97,126 +96,12 @@ #define KERNEL_STACK_ADDR 0x00400000 #endif #endif -#define INITRD_LOAD_ADDR 0x00400000 -#define KERNEL_PARAMS_ADDR 0x00090000 +#define INITRD_LOAD_ADDR 0x00400000 +#define KERNEL_PARAMS_ADDR 0x00090000 +#define KERNEL_CMDLINE_ADDR 0x00099000 #define GUI_REFRESH_INTERVAL 30 -/* from plex86 (BSD license) */ -struct __attribute__ ((packed)) linux_params { - // For 0x00..0x3f, see 'struct screen_info' in linux/include/linux/tty.h. - // I just padded out the VESA parts, rather than define them. - - /* 0x000 */ uint8_t orig_x; - /* 0x001 */ uint8_t orig_y; - /* 0x002 */ uint16_t ext_mem_k; - /* 0x004 */ uint16_t orig_video_page; - /* 0x006 */ uint8_t orig_video_mode; - /* 0x007 */ uint8_t orig_video_cols; - /* 0x008 */ uint16_t unused1; - /* 0x00a */ uint16_t orig_video_ega_bx; - /* 0x00c */ uint16_t unused2; - /* 0x00e */ uint8_t orig_video_lines; - /* 0x00f */ uint8_t orig_video_isVGA; - /* 0x010 */ uint16_t orig_video_points; - /* 0x012 */ uint8_t pad0[0x20 - 0x12]; // VESA info. - /* 0x020 */ uint16_t cl_magic; // Commandline magic number (0xA33F) - /* 0x022 */ uint16_t cl_offset; // Commandline offset. Address of commandline - // is calculated as 0x90000 + cl_offset, bu - // only if cl_magic == 0xA33F. - /* 0x024 */ uint8_t pad1[0x40 - 0x24]; // VESA info. - - /* 0x040 */ uint8_t apm_bios_info[20]; // struct apm_bios_info - /* 0x054 */ uint8_t pad2[0x80 - 0x54]; - - // Following 2 from 'struct drive_info_struct' in drivers/block/cciss.h. - // Might be truncated? - /* 0x080 */ uint8_t hd0_info[16]; // hd0-disk-parameter from intvector 0x41 - /* 0x090 */ uint8_t hd1_info[16]; // hd1-disk-parameter from intvector 0x46 - - // System description table truncated to 16 bytes - // From 'struct sys_desc_table_struct' in linux/arch/i386/kernel/setup.c. - /* 0x0a0 */ uint16_t sys_description_len; - /* 0x0a2 */ uint8_t sys_description_table[14]; - // [0] machine id - // [1] machine submodel id - // [2] BIOS revision - // [3] bit1: MCA bus - - /* 0x0b0 */ uint8_t pad3[0x1e0 - 0xb0]; - /* 0x1e0 */ uint32_t alt_mem_k; - /* 0x1e4 */ uint8_t pad4[4]; - /* 0x1e8 */ uint8_t e820map_entries; - /* 0x1e9 */ uint8_t eddbuf_entries; // EDD_NR - /* 0x1ea */ uint8_t pad5[0x1f1 - 0x1ea]; - /* 0x1f1 */ uint8_t setup_sects; // size of setup.S, number of sectors - /* 0x1f2 */ uint16_t mount_root_rdonly; // MOUNT_ROOT_RDONLY (if !=0) - /* 0x1f4 */ uint16_t sys_size; // size of compressed kernel-part in the - // (b)zImage-file (in 16 byte units, rounded up) - /* 0x1f6 */ uint16_t swap_dev; // (unused AFAIK) - /* 0x1f8 */ uint16_t ramdisk_flags; - /* 0x1fa */ uint16_t vga_mode; // (old one) - /* 0x1fc */ uint16_t orig_root_dev; // (high=Major, low=minor) - /* 0x1fe */ uint8_t pad6[1]; - /* 0x1ff */ uint8_t aux_device_info; - /* 0x200 */ uint16_t jump_setup; // Jump to start of setup code, - // aka "reserved" field. - /* 0x202 */ uint8_t setup_signature[4]; // Signature for SETUP-header, ="HdrS" - /* 0x206 */ uint16_t header_format_version; // Version number of header format; - /* 0x208 */ uint8_t setup_S_temp0[8]; // Used by setup.S for communication with - // boot loaders, look there. - /* 0x210 */ uint8_t loader_type; - // 0 for old one. - // else 0xTV: - // T=0: LILO - // T=1: Loadlin - // T=2: bootsect-loader - // T=3: SYSLINUX - // T=4: ETHERBOOT - // V=version - /* 0x211 */ uint8_t loadflags; - // bit0 = 1: kernel is loaded high (bzImage) - // bit7 = 1: Heap and pointer (see below) set by boot - // loader. - /* 0x212 */ uint16_t setup_S_temp1; - /* 0x214 */ uint32_t kernel_start; - /* 0x218 */ uint32_t initrd_start; - /* 0x21c */ uint32_t initrd_size; - /* 0x220 */ uint8_t setup_S_temp2[4]; - /* 0x224 */ uint16_t setup_S_heap_end_pointer; - /* 0x226 */ uint8_t pad7[0x2d0 - 0x226]; - - /* 0x2d0 : Int 15, ax=e820 memory map. */ - // (linux/include/asm-i386/e820.h, 'struct e820entry') -#define E820MAX 32 -#define E820_RAM 1 -#define E820_RESERVED 2 -#define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */ -#define E820_NVS 4 - struct { - uint64_t addr; - uint64_t size; - uint32_t type; - } e820map[E820MAX]; - - /* 0x550 */ uint8_t pad8[0x600 - 0x550]; - - // BIOS Enhanced Disk Drive Services. - // (From linux/include/asm-i386/edd.h, 'struct edd_info') - // Each 'struct edd_info is 78 bytes, times a max of 6 structs in array. - /* 0x600 */ uint8_t eddbuf[0x7d4 - 0x600]; - - /* 0x7d4 */ uint8_t pad9[0x800 - 0x7d4]; - /* 0x800 */ uint8_t commandline[0x800]; - - /* 0x1000 */ - uint64_t gdt_table[256]; - uint64_t idt_table[48]; -}; - -#define KERNEL_CS 0x10 -#define KERNEL_DS 0x18 - /* XXX: use a two level table to limit memory usage */ #define MAX_IOPORTS 65536 @@ -360,28 +245,28 @@ char *pstrcat(char *buf, int buf_size, const char *s) return buf; } -int load_kernel(const char *filename, uint8_t *addr) +#if defined (TARGET_I386) +int load_kernel(const char *filename, uint8_t *addr, + uint8_t *real_addr) { int fd, size; -#if defined (TARGET_I386) int setup_sects; - uint8_t bootsect[512]; -#endif - printf("Load kernel at %p (0x%08x)\n", addr, - (uint32_t)addr - (uint32_t)phys_ram_base); fd = open(filename, O_RDONLY); if (fd < 0) return -1; -#if defined (TARGET_I386) - if (read(fd, bootsect, 512) != 512) + + /* load 16 bit code */ + if (read(fd, real_addr, 512) != 512) goto fail; - setup_sects = bootsect[0x1F1]; + setup_sects = real_addr[0x1F1]; if (!setup_sects) setup_sects = 4; - /* skip 16 bit setup code */ - lseek(fd, (setup_sects + 1) * 512, SEEK_SET); -#endif + if (read(fd, real_addr + 512, setup_sects * 512) != + setup_sects * 512) + goto fail; + + /* load 32 bit code */ size = read(fd, addr, 16 * 1024 * 1024); if (size < 0) goto fail; @@ -391,6 +276,7 @@ int load_kernel(const char *filename, uint8_t *addr) close(fd); return -1; } +#endif /* return the size or -1 if error */ int load_image(const char *filename, uint8_t *addr) @@ -486,6 +372,7 @@ void hw_error(const char *fmt, ...) /* PC cmos mappings */ #define REG_EQUIPMENT_BYTE 0x14 #define REG_IBM_CENTURY_BYTE 0x32 +#define REG_IBM_PS2_CENTURY_BYTE 0x37 uint8_t cmos_data[128]; uint8_t cmos_index; @@ -550,6 +437,7 @@ static void cmos_update_time(void) cmos_data[RTC_MONTH] = to_bcd(tm->tm_mon + 1); cmos_data[RTC_YEAR] = to_bcd(tm->tm_year % 100); cmos_data[REG_IBM_CENTURY_BYTE] = to_bcd((tm->tm_year / 100) + 19); + cmos_data[REG_IBM_PS2_CENTURY_BYTE] = cmos_data[REG_IBM_CENTURY_BYTE]; } uint32_t cmos_ioport_read(CPUState *env, uint32_t addr) @@ -568,6 +456,7 @@ uint32_t cmos_ioport_read(CPUState *env, uint32_t addr) case RTC_MONTH: case RTC_YEAR: case REG_IBM_CENTURY_BYTE: + case REG_IBM_PS2_CENTURY_BYTE: cmos_update_time(); ret = cmos_data[cmos_index]; break; @@ -3082,23 +2971,6 @@ static void host_alarm_handler(int host_signum, siginfo_t *info, } } -#ifdef CONFIG_SOFTMMU -void *get_mmap_addr(unsigned long size) -{ - return NULL; -} -#else -unsigned long mmap_addr = PHYS_RAM_BASE; - -void *get_mmap_addr(unsigned long size) -{ - unsigned long addr; - addr = mmap_addr; - mmap_addr += ((size + 4095) & ~4095) + 4096; - return (void *)addr; -} -#endif - /* main execution loop */ CPUState *cpu_gdbstub_get_env(void *opaque) @@ -3259,6 +3131,10 @@ void help(void) "-d output log to %s\n" "-hdachs c,h,s force hard disk 0 geometry (usually qemu can guess it)\n" "-L path set the directory for the BIOS and VGA BIOS\n" +#ifdef USE_CODE_COPY + "-no-code-copy disable code copy acceleration\n" +#endif + "\n" "During emulation, use C-a h to get terminal commands:\n", #ifdef CONFIG_SOFTMMU @@ -3295,6 +3171,7 @@ struct option long_options[] = { { "boot", 1, NULL, 0, }, { "fda", 1, NULL, 0, }, { "fdb", 1, NULL, 0, }, + { "no-code-copy", 0, NULL, 0}, { NULL, 0, NULL, 0 }, }; @@ -3310,19 +3187,26 @@ extern void __sigaction(); #endif #endif /* CONFIG_SDL */ +#if defined (TARGET_I386) && defined(USE_CODE_COPY) + +/* this stack is only used during signal handling */ +#define SIGNAL_STACK_SIZE 32768 + +static uint8_t *signal_stack; + +#endif + int main(int argc, char **argv) { int c, ret, initrd_size, i, use_gdbstub, gdbstub_port, long_index; int snapshot, linux_boot; -#if defined (TARGET_I386) - struct linux_params *params; -#endif struct sigaction act; struct itimerval itv; CPUState *env; const char *initrd_filename; const char *hd_filename[MAX_DISKS], *fd_filename[MAX_FD]; const char *kernel_filename, *kernel_cmdline; + char buf[1024]; DisplayState *ds = &display_state; /* we never want that malloc() uses mmap() */ @@ -3420,6 +3304,9 @@ int main(int argc, char **argv) case 14: fd_filename[1] = optarg; break; + case 15: + code_copy_enabled = 0; + break; } break; case 'h': @@ -3554,9 +3441,42 @@ int main(int argc, char **argv) /* allocate RAM */ cpu_register_physical_memory(0, ram_size, 0); +#if defined(TARGET_I386) + /* RAW PC boot */ + + /* BIOS load */ + snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME); + ret = load_image(buf, phys_ram_base + 0x000f0000); + if (ret != 0x10000) { + fprintf(stderr, "qemu: could not load PC bios '%s'\n", buf); + exit(1); + } + + /* VGA BIOS load */ + snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME); + ret = load_image(buf, phys_ram_base + 0x000c0000); + + /* setup basic memory access */ + cpu_register_physical_memory(0xc0000, 0x10000, 0xc0000 | IO_MEM_ROM); + cpu_register_physical_memory(0xf0000, 0x10000, 0xf0000 | IO_MEM_ROM); + + bochs_bios_init(); + if (linux_boot) { + extern uint8_t linux_boot_start; + extern uint8_t linux_boot_end; + + if (bs_table[0] == NULL) { + fprintf(stderr, "A disk image must be given for 'hda' when booting a Linux kernel\n"); + exit(1); + } + bdrv_set_boot_sector(bs_table[0], &linux_boot_start, + &linux_boot_end - &linux_boot_start); + /* now we can load the kernel */ - ret = load_kernel(kernel_filename, phys_ram_base + KERNEL_LOAD_ADDR); + ret = load_kernel(kernel_filename, + phys_ram_base + KERNEL_LOAD_ADDR, + phys_ram_base + KERNEL_PARAMS_ADDR); if (ret < 0) { fprintf(stderr, "qemu: could not load kernel '%s'\n", kernel_filename); @@ -3573,89 +3493,30 @@ int main(int argc, char **argv) exit(1); } } - - /* init kernel params */ -#ifdef TARGET_I386 - params = (void *)(phys_ram_base + KERNEL_PARAMS_ADDR); - memset(params, 0, sizeof(struct linux_params)); - params->mount_root_rdonly = 0; - stw_raw(¶ms->cl_magic, 0xA33F); - stw_raw(¶ms->cl_offset, params->commandline - (uint8_t *)params); - stl_raw(¶ms->alt_mem_k, (ram_size / 1024) - 1024); - pstrcat(params->commandline, sizeof(params->commandline), kernel_cmdline); - params->loader_type = 0x01; if (initrd_size > 0) { - stl_raw(¶ms->initrd_start, INITRD_LOAD_ADDR); - stl_raw(¶ms->initrd_size, initrd_size); + stl_raw(phys_ram_base + KERNEL_PARAMS_ADDR + 0x218, INITRD_LOAD_ADDR); + stl_raw(phys_ram_base + KERNEL_PARAMS_ADDR + 0x21c, initrd_size); } - params->orig_video_lines = 25; - params->orig_video_cols = 80; - - /* setup basic memory access */ - cpu_x86_update_cr0(env, 0x00000033); - - memset(params->idt_table, 0, sizeof(params->idt_table)); - - stq_raw(¶ms->gdt_table[2], 0x00cf9a000000ffffLL); /* KERNEL_CS */ - stq_raw(¶ms->gdt_table[3], 0x00cf92000000ffffLL); /* KERNEL_DS */ - /* for newer kernels (2.6.0) CS/DS are at different addresses */ - stq_raw(¶ms->gdt_table[12], 0x00cf9a000000ffffLL); /* KERNEL_CS */ - stq_raw(¶ms->gdt_table[13], 0x00cf92000000ffffLL); /* KERNEL_DS */ - - env->idt.base = (void *)((uint8_t *)params->idt_table - phys_ram_base); - env->idt.limit = sizeof(params->idt_table) - 1; - env->gdt.base = (void *)((uint8_t *)params->gdt_table - phys_ram_base); - env->gdt.limit = sizeof(params->gdt_table) - 1; - - cpu_x86_load_seg_cache(env, R_CS, KERNEL_CS, NULL, 0xffffffff, 0x00cf9a00); - cpu_x86_load_seg_cache(env, R_DS, KERNEL_DS, NULL, 0xffffffff, 0x00cf9200); - cpu_x86_load_seg_cache(env, R_ES, KERNEL_DS, NULL, 0xffffffff, 0x00cf9200); - cpu_x86_load_seg_cache(env, R_SS, KERNEL_DS, NULL, 0xffffffff, 0x00cf9200); - cpu_x86_load_seg_cache(env, R_FS, KERNEL_DS, NULL, 0xffffffff, 0x00cf9200); - cpu_x86_load_seg_cache(env, R_GS, KERNEL_DS, NULL, 0xffffffff, 0x00cf9200); - - env->eip = KERNEL_LOAD_ADDR; - env->regs[R_ESI] = KERNEL_PARAMS_ADDR; - env->eflags = 0x2; -#elif defined (TARGET_PPC) - PPC_init_hw(env, ram_size, KERNEL_LOAD_ADDR, ret, - KERNEL_STACK_ADDR, boot_device); -#endif - } else { - char buf[1024]; - - /* RAW PC boot */ -#if defined(TARGET_I386) - /* BIOS load */ - snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME); - ret = load_image(buf, phys_ram_base + 0x000f0000); - if (ret != 0x10000) { - fprintf(stderr, "qemu: could not load PC bios '%s'\n", buf); - exit(1); - } - - /* VGA BIOS load */ - snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME); - ret = load_image(buf, phys_ram_base + 0x000c0000); - - /* setup basic memory access */ - cpu_register_physical_memory(0xc0000, 0x10000, 0xc0000 | IO_MEM_ROM); - cpu_register_physical_memory(0xf0000, 0x10000, 0xf0000 | IO_MEM_ROM); - - bochs_bios_init(); + pstrcpy(phys_ram_base + KERNEL_CMDLINE_ADDR, 4096, + kernel_cmdline); + stw_raw(phys_ram_base + KERNEL_PARAMS_ADDR + 0x20, 0xA33F); + stw_raw(phys_ram_base + KERNEL_PARAMS_ADDR + 0x22, + KERNEL_CMDLINE_ADDR - KERNEL_PARAMS_ADDR); + /* loader type */ + stw_raw(phys_ram_base + KERNEL_PARAMS_ADDR + 0x210, 0x01); + } #elif defined(TARGET_PPC) - /* allocate ROM */ - // snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME); - snprintf(buf, sizeof(buf), "%s", BIOS_FILENAME); - printf("load BIOS at %p\n", phys_ram_base + 0x000f0000); - ret = load_image(buf, phys_ram_base + 0x000f0000); - if (ret != 0x10000) { - fprintf(stderr, "qemu: could not load PPC bios '%s' (%d)\n%m\n", - buf, ret); - exit(1); - } -#endif + /* allocate ROM */ + // snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME); + snprintf(buf, sizeof(buf), "%s", BIOS_FILENAME); + printf("load BIOS at %p\n", phys_ram_base + 0x000f0000); + ret = load_image(buf, phys_ram_base + 0x000f0000); + if (ret != 0x10000) { + fprintf(stderr, "qemu: could not load PPC bios '%s' (%d)\n%m\n", + buf, ret); + exit(1); } +#endif /* terminal init */ if (nographic) { @@ -3692,15 +3553,44 @@ int main(int argc, char **argv) PPC_end_init(); #endif fdctrl_register((unsigned char **)fd_filename, snapshot, boot_device); + /* setup cpu signal handlers for MMU / self modifying code handling */ +#if !defined(CONFIG_SOFTMMU) + +#if defined (TARGET_I386) && defined(USE_CODE_COPY) + { + stack_t stk; + signal_stack = malloc(SIGNAL_STACK_SIZE); + stk.ss_sp = signal_stack; + stk.ss_size = SIGNAL_STACK_SIZE; + stk.ss_flags = 0; + + if (sigaltstack(&stk, NULL) < 0) { + perror("sigaltstack"); + exit(1); + } + } +#endif + sigfillset(&act.sa_mask); act.sa_flags = SA_SIGINFO; -#if !defined(CONFIG_SOFTMMU) +#if defined (TARGET_I386) && defined(USE_CODE_COPY) + act.sa_flags |= SA_ONSTACK; +#endif act.sa_sigaction = host_segv_handler; sigaction(SIGSEGV, &act, NULL); sigaction(SIGBUS, &act, NULL); +#if defined (TARGET_I386) && defined(USE_CODE_COPY) + sigaction(SIGFPE, &act, NULL); +#endif #endif + /* timer signal */ + sigfillset(&act.sa_mask); + act.sa_flags = SA_SIGINFO; +#if defined (TARGET_I386) && defined(USE_CODE_COPY) + act.sa_flags |= SA_ONSTACK; +#endif act.sa_sigaction = host_alarm_handler; sigaction(SIGALRM, &act, NULL); diff --git a/vl.h b/vl.h index 4c2ed6ee00..ebc809a1c3 100644 --- a/vl.h +++ b/vl.h @@ -32,7 +32,6 @@ extern int64_t ticks_per_sec; typedef void (IOPortWriteFunc)(struct CPUState *env, uint32_t address, uint32_t data); typedef uint32_t (IOPortReadFunc)(struct CPUState *env, uint32_t address); -void *get_mmap_addr(unsigned long size); int register_ioport_read(int start, int length, IOPortReadFunc *func, int size); int register_ioport_write(int start, int length, IOPortWriteFunc *func, int size); void pic_set_irq(int irq, int level); @@ -56,6 +55,7 @@ int bdrv_write(BlockDriverState *bs, int64_t sector_num, const uint8_t *buf, int nb_sectors); void bdrv_get_geometry(BlockDriverState *bs, int64_t *nb_sectors_ptr); int bdrv_commit(BlockDriverState *bs); +void bdrv_set_boot_sector(BlockDriverState *bs, const uint8_t *data, int size); /* user mode linux compatible COW file */ #define COW_MAGIC 0x4f4f4f4d /* MOOO */ -- cgit v1.2.3