summaryrefslogtreecommitdiff
path: root/vl.c
AgeCommit message (Collapse)AuthorFilesLines
2012-08-27Revert "vl: fix -hdachs/-hda argument order parsing issues"malc1-18/+21
This reverts commit 7764ae9671f1cd74227cf4404431dd5213799ef0. Signed-off-by: malc <av1474@comtv.ru>
2012-08-27Revert "vga: add some optional CGA compatibility hacks"malc1-23/+0
This reverts commit 482f7bf86b43af9f6903c52726fedf82b28bf953. Signed-off-by: malc <av1474@comtv.ru>
2012-08-27Revert "i8259: add -no-spurious-interrupt-hack option"malc1-4/+0
This reverts commit f278d4947fff814dcde2ef2acad36d172ff8be35. Signed-off-by: malc <av1474@comtv.ru>
2012-08-24i8259: add -no-spurious-interrupt-hack optionMatthew Ogilvie1-0/+4
This patch provides a way to optionally suppress spurious interrupts, as a workaround for systems described below: Some old operating systems do not handle spurious interrupts well, and qemu tends to generate them significantly more often than real hardware. Examples: - Microport UNIX System V/386 v 2.1 (ca 1987) (The main problem I'm fixing: Without this patch, it panics sporadically when accessing the hard disk.) - AT&T UNIX System V/386 Release 4.0 Version 2.1a (ca 1991) See screenshot in "QEMU Official OS Support List": http://www.claunia.com/qemu/objectManager.php?sClass=application&iId=9 (I don't have this system to test.) - A report about OS/2 boot lockup from 2004 by Hampa Hug: http://lists.nongnu.org/archive/html/qemu-devel/2004-09/msg00367.html (My patch was partially inspired by his.) Also: http://lists.nongnu.org/archive/html/qemu-devel/2005-06/msg00243.html (I don't have this system to test.) Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net> Signed-off-by: malc <av1474@comtv.ru>
2012-08-24vga: add some optional CGA compatibility hacksMatthew Ogilvie1-0/+23
This patch adds some optional compatibility hacks (default disabled) to allow Microport UNIX to function under qemu. I've tried to structure it to be easy to add more hacks for other old CGA programs, if anyone ever needs them. Microport UNIX System V/386 v 2.1 (ca 1987) tries to program the CGA registers directly with neither the assistance of BIOS, nor with proper handling of EGA/VGA-only registers. Note that it didn't work on real VGA hardware, either (although in that case, the most obvious problems seemed to be out-of-range hsync and/or vsync signalling, rather than the issues in this patch). Eventually real MDA and/or CGA support might provide an alternative to this patch, although a hybrid approach like this patch might still be useful in marginal cases. Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net> Signed-off-by: malc <av1474@comtv.ru>
2012-08-24vl: fix -hdachs/-hda argument order parsing issuesMatthew Ogilvie1-21/+18
Without this patch, the -hdachs argument had to occur either BEFORE the corresponding "-hda" option, or AFTER the plain disk image name (if neither -hda nor -drive is used). Otherwise it would effectively be ignored. Option -hdachs still has no effect on -drive, but that seems best. Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net> Signed-off-by: malc <av1474@comtv.ru>
2012-08-18vl: Round argument of -m up to multiple of 8KiBMarkus Armbruster1-3/+4
Partial pages make little sense and don't work. Ensure the RAM size is a multiple of any possible target's page size. Fixes $ qemu-system-x86_64 -nodefaults -S -vnc :0 -m 0.8 qemu-system-x86_64: /work/armbru/qemu/exec.c:2255: register_subpage: Assertion `existing->mr->subpage || existing->mr == &io_mem_unassigned' failed. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-16Allow QEMUMachine to override reset sequencingDavid Gibson1-1/+10
qemu_system_reset() function always performs the same basic actions on all machines. This includes running all the reset handler hooks, however the order in which these will run is not always easily predictable. This patch splits the core of qemu_system_reset() - the invocation of the reset handlers - out into a new qemu_devices_reset() function. qemu_system_reset() will usually call qemu_devices_reset(), but that can be now overriden by a new reset method in the QEMUMachine structure. Individual machines can use this reset method, if necessary, to perform any extra, machine specific initializations which have to occur before or after the bulk of the reset handlers. It's expected that the method will call qemu_devices_reset() at some point, but if the machine has really strange ordering requirements between devices resets it could even override that with it's own reset sequence (with great care, obviously). For a specific example of when this might be needed: a number of machines (but not PC) load images specified with -kernel or -initrd directly into the machine RAM before booting the guest. This mostly works at the moment, but to make this actually safe requires that this load occurs after peripheral devices are reset - otherwise they could have active DMAs in progress which would clobber the in memory images. Some machines (notably pseries) also have other entry conditions which need to be set up as the last thing before executing in guest space - some of this could be considered "emulated firmware" in the sense that the actions of the firmware are emulated directly by qemu rather than by executing a firmware image within the guest. When the platform's firmware to OS interface is sufficiently well specified, this saves time both in implementing the "firmware" and executing it. aliguori: don't unconditionally dereference current_machine Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-16Command line support for seccomp with -sandbox (v8)Eduardo Otubo1-8/+30
Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- v7 -> v8 - Parse options correctly (aliguori)
2012-08-16Adding seccomp calls to vl.c (v8)Eduardo Otubo1-0/+13
Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- v1: - Full seccomp calls and data included in vl.c v1 -> v2: - Full seccomp calls and data removed from vl.c and put into separate qemu-seccomp.[ch] file.
2012-08-13qapi: add query-machines commandAnthony Liguori1-0/+31
This provides the same output as -M ? but in a structured way. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-13qmp: emit the WAKEUP event when the guest is put to runLuiz Capitulino1-1/+1
Today, the WAKEUP event is emitted when a wakeup _request_ is made. This could be the system_wakeup command, for example. A better semantic would be to emit the event when the guest is already running, as that's what matters in the end. This commit does that change. In theory, this could break compatibility. In practice, it shouldn't happen though, as clients shouldn't rely on timing characteristics of the events. That is, a client relying that the guest is not running when the event arrives may break if the event arrives after the guest is already running. This commit also adds the missing documentation for the WAKEUP event. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-13qmp: don't emit the RESET event on wakeup from S3Luiz Capitulino1-1/+15
QEMU is basically using reset logic when waking up from S3. This causes the QMP RESET event to be emitted, which is wrong. Also, the runstate checks done in reset are not necessary for S3 wakeup. Fix this by untangling wakeup from reset logic and passing VMRESET_SILENT to qemu_system_reset() to avoid emitting the RESET event. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-11Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori1-5/+5
* stefanha/trivial-patches: target-arm: Fix typos in comments arm: translate: comment typo - s/middel/middle/ vl.c: Exit QEMU early if no machine is found
2012-08-11Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori1-0/+5
* bonzini/scsi-next: scsi-disk: add support for the UNMAP command scsi-disk: improve out-of-range LBA detection for WRITE SAME scsi-disk: more assertions and resets for aiocb virtio-scsi: do not compare 32-bit QEMU tags against 64-bit virtio-scsi tags iscsi: Pick default initiator-name based on the name of the VM iscsi: reorganize code for parse_initiator_name iscsi: do not leak initiator_name
2012-08-10vl.c: Exit QEMU early if no machine is foundDunrong Huang1-5/+5
We check whether the variable machine is NULL or not before accessing it. If machine is NULL, exit QEMU with an error, this can avoids a segfault error. Markus Armbruster <armbru@redhat.com> adds that the segfault can be reproduced as follows: $ qemu-system-xtensa -cpu help Signed-off-by: Dunrong Huang <riegamaths@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-09handle device help before accelerator set upBruce Rogers1-3/+5
A command line device probe using just -device "?" gets processed after qemu-kvm initializes the accelerator. If /dev/kvm is not present, the accelerator check will fail (kvm is defaulted to on), which causes libvirt to not be set up to handle qemu guests. Moving the device help handling before the accelerator set up allows the device probe to work in this configuration and libvirt succeeds in setting up for a qemu hypervisor mode. Signed-off-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09iscsi: Pick default initiator-name based on the name of the VMRonnie Sahlberg1-0/+5
This patch updates the iscsi layer to automatically pick a 'unique' initiator-name based on the name of the vm in case the user has not set an explicit iqn-name to use. Create a new function qemu_get_vm_name() that returns the name of the VM, if specified. This way we can thus create default names to use as the initiator name based on the guest session. If the VM is not named via the '-name' command line argument, the iscsi initiator-name used wiull simply be iqn.2008-11.org.linux-kvm If a name for the VM was specified with the '-name' option, iscsi will use a default initiatorname of iqn.2008-11.org.linux-kvm:<name> These names are just the default iscsi initiator name that qemu will generate/use only when the user has not set an explicit initiator name via the commandlines or config files. Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-08-04Fixes related to processing of qemu's -numa optionChegu Vinod1-22/+21
The -numa option to qemu is used to create [fake] numa nodes and expose them to the guest OS instance. There are a couple of issues with the -numa option: a) Max VCPU's that can be specified for a guest while using the qemu's -numa option is 64. Due to a typecasting issue when the number of VCPUs is > 32 the VCPUs don't show up under the specified [fake] numa nodes. b) KVM currently has support for 160VCPUs per guest. The qemu's -numa option has only support for upto 64VCPUs per guest. This patch addresses these two issues. Below are examples of (a) and (b) a) >32 VCPUs are specified with the -numa option: /usr/local/bin/qemu-system-x86_64 \ -enable-kvm \ 71:01:01 \ -net tap,ifname=tap0,script=no,downscript=no \ -vnc :4 ... Upstream qemu : -------------- QEMU 1.1.50 monitor - type 'help' for more information (qemu) info numa 6 nodes node 0 cpus: 0 1 2 3 4 5 6 7 8 9 32 33 34 35 36 37 38 39 40 41 node 0 size: 131072 MB node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51 node 1 size: 131072 MB node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59 node 2 size: 131072 MB node 3 cpus: 30 node 3 size: 131072 MB node 4 cpus: node 4 size: 131072 MB node 5 cpus: 31 node 5 size: 131072 MB With the patch applied : ----------------------- QEMU 1.1.50 monitor - type 'help' for more information (qemu) info numa 6 nodes node 0 cpus: 0 1 2 3 4 5 6 7 8 9 node 0 size: 131072 MB node 1 cpus: 10 11 12 13 14 15 16 17 18 19 node 1 size: 131072 MB node 2 cpus: 20 21 22 23 24 25 26 27 28 29 node 2 size: 131072 MB node 3 cpus: 30 31 32 33 34 35 36 37 38 39 node 3 size: 131072 MB node 4 cpus: 40 41 42 43 44 45 46 47 48 49 node 4 size: 131072 MB node 5 cpus: 50 51 52 53 54 55 56 57 58 59 node 5 size: 131072 MB b) >64 VCPUs specified with -numa option: /usr/local/bin/qemu-system-x86_64 \ -enable-kvm \ -cpu Westmere,+rdtscp,+pdpe1gb,+dca,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pclmuldq,+pbe,+tm,+ht,+ss,+acpi,+d-vnc :4 ... Upstream qemu : -------------- only 63 CPUs in NUMA mode supported. only 64 CPUs in NUMA mode supported. QEMU 1.1.50 monitor - type 'help' for more information (qemu) info numa 8 nodes node 0 cpus: 6 7 8 9 38 39 40 41 70 71 72 73 node 0 size: 65536 MB node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51 74 75 76 77 78 79 node 1 size: 65536 MB node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59 60 61 node 2 size: 65536 MB node 3 cpus: 30 62 node 3 size: 65536 MB node 4 cpus: node 4 size: 65536 MB node 5 cpus: node 5 size: 65536 MB node 6 cpus: 31 63 node 6 size: 65536 MB node 7 cpus: 0 1 2 3 4 5 32 33 34 35 36 37 64 65 66 67 68 69 node 7 size: 65536 MB With the patch applied : ----------------------- QEMU 1.1.50 monitor - type 'help' for more information (qemu) info numa 8 nodes node 0 cpus: 0 1 2 3 4 5 6 7 8 9 node 0 size: 65536 MB node 1 cpus: 10 11 12 13 14 15 16 17 18 19 node 1 size: 65536 MB node 2 cpus: 20 21 22 23 24 25 26 27 28 29 node 2 size: 65536 MB node 3 cpus: 30 31 32 33 34 35 36 37 38 39 node 3 size: 65536 MB node 4 cpus: 40 41 42 43 44 45 46 47 48 49 node 4 size: 65536 MB node 5 cpus: 50 51 52 53 54 55 56 57 58 59 node 5 size: 65536 MB node 6 cpus: 60 61 62 63 64 65 66 67 68 69 node 6 size: 65536 MB node 7 cpus: 70 71 72 73 74 75 76 77 78 79 Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>, Jim Hull <jim.hull@hp.com>, Craig Hada <craig.hada@hp.com> Tested-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-03fips: fix build on !LinuxAnthony Liguori1-3/+0
Commit 0f66998 makes -enable-fips conditional on Linux hosts but then uses it unconditionally in vl.c. Fix this by moving the fips handling to os-posix.c and adding a condition. Cc: Paul Moore <pmoore@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-03vnc: disable VNC password authentication (security type 2) when in FIPS modePaul Moore1-0/+4
FIPS 140-2 requires disabling certain ciphers, including DES, which is used by VNC to obscure passwords when they are sent over the network. The solution for FIPS users is to disable the use of VNC password auth when the host system is operating in FIPS compliance mode and the user has specified '-enable-fips' on the QEMU command line. This patch causes QEMU to emit a message to stderr when the host system is running in FIPS mode and a VNC password was specified on the commend line. If the system is not running in FIPS mode, or is running in FIPS mode but VNC password authentication was not requested, QEMU operates normally. Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-02Support 'help' as a synonym for '?' in command line optionsPeter Maydell1-2/+2
For command line options which permit '?' meaning 'please list the permitted values', add support for 'help' as a synonym, by abstracting the check out into a helper function. This change means that in some cases where we were being lazy in our string parsing, "?junk" will now be rejected as an invalid option rather than being (undocumentedly) treated the same way as "?". Update the documentation to use 'help' rather than '?', since '?' is a shell metacharacter and thus prone to fail confusingly if there is a single character filename in the current working directory and the '?' has not been escaped. It's therefore better to steer users towards 'help', though '?' is retained for backwards compatibility. We do not, however, update the output of the system emulator's -help (or any documentation autogenerated from the qemu-options.hx which is the source of the -help text) because libvirt parses our -help output and will break. At a later date when QEMU provides a better interface so libvirt can avoid having to do this, we can update the -help text too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-30Merge commit 'quintela/migration-next-v5' into stagingAnthony Liguori1-2/+1
* commit '6c779f22a93cc6e4565b940ef616e3efc5b50ba5': Change ram_save_block to return -1 if there are no more changes ram: save_live_setup() we don't need to synchronize the dirty bitmap. ram: iterate phase ram: save_live_complete() only do one loop ram: save_live_setup() don't need to sent pages savevm: split save_live into stage2 and stage3 savevm: split save_live_setup from save_live_state savevm: introduce is_active method savevm: Refactor cancel operation in its own operation savevm: remove SaveLiveStateHandler savevm: remove SaveSetParamsHandler savevm: Live migration handlers register the struct directly savevm: Use a struct to pass all handlers
2012-07-28vl.c: Don't print errno after failed qemu_chr_new()Peter Maydell1-6/+6
The qemu_chr_new() function doesn't set errno on failure, so don't print strerror(errno) on the error handling path when dealing with the -serial, -parallel and -virtioconsole arguments. This avoids nonsensical error messages like: $ ./arm-softmmu/qemu-system-arm -serial wombat qemu: could not open serial device 'wombat': Success We also rephrase the message slightly to make it a little clearer that we're expecting the name of a QEMU chr backend rather than a host or guest serial/parallel/etc device. Reported-by: Christian Müller <christian.mueller@heig-vd.ch> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-20savevm: Live migration handlers register the struct directlyJuan Quintela1-2/+1
Notice that the live migration users never unregister, so no problem about freeing the ops structure. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-17block: Geometry and translation hints are now useless, purge themMarkus Armbruster1-1/+1
There are two producers of these hints: drive_init() on behalf of -drive, and hd_geometry_guess(). The only consumer of the hint is hd_geometry_guess(). The callers of hd_geometry_guess() call it only when drive_init() didn't set the hints. Therefore, drive_init()'s hints are never used. Thus, hd_geometry_guess() only ever sees hints it produced itself in a prior call. Only the first call computes something, subsequent calls just repeat the first call's results. However, hd_geometry_guess() is never called more than once: the device models don't, and the block device is destroyed on unplug. Thus, dropping the repeat feature doesn't break anything now. If a block device wasn't destroyed on unplug and could be reused with a new device, then repeating old results would be wrong. Thus, dropping the repeat feature prevents future breakage. This renders the hints unused. Purge them from the block layer. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-13vnc: add a more descriptive error messageAmos Kong1-1/+4
Currently qemu outputs some low-level error in qemu-sockets.c when failed to start vnc server. eg. 'getaddrinfo(127.0.0.1,5902): Name or service not known' Some libvirt users could not know what's happened with this unclear error message. This patch added a more descriptive error message. Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-11qemu_find_file: check name as a straight path even if it has no '/'Peter Maydell1-3/+2
Make qemu_find_file() check for the passed in name as a straight pathname even if it doesn't have any path separator character in it. This means that "-bios foo", "-dtb foo" etc will find a file 'foo' in the current directory. This removes an inconsistency with -kernel and -initrd, which both accept plain filenames as meaning files in the current directory. It's also less confusing for the user than an undocumented restriction that "this option accepts a filename, except for the special case where the filename you pass happens not to have a '/' in it, in which case we'll ignore it." Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-19Allow machines to configure the QEMU_VERSION that's exposed via hardwareCrístian Viana1-0/+4
QEMU exposes its version to the guest's hardware and in some cases that is wrong (e.g. Windows prints messages about driver updates when you switch the QEMU version). There is a new field now on the struct QEmuMachine, hw_version, which may contain the version that the specific machine should report. If that field is set, then that machine will report that version to the guest. Signed-off-by: Crístian Viana <vianac@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-09do not include <libutil.h> needlessly or if it doesn't existMichael Tokarev1-6/+0
<libutil.h> and <util.h> on *BSD (some have one, some another) were #included just for openpty() declaration. The only file where this function is actually used is qemu-char.c. In vl.c and net/tap-bsd.c, none of functions declared in libutil.h (login logout logwtmp timdomain openpty forkpty uu_lock realhostname fparseln and a few others depending on version) are used. Initially the code which is currently in qemu-char.c was in vl.c, it has been removed into separate file in commit 0e82f34d077dc2542 Fri Oct 31 18:44:40 2008, but the #includes were left in vl.c. So with vl.c, we just remove includes - libutil.h, util.h and pty.h (which declares only openpty() and forkpty()) from there. The code in net/tap-bsd.c, which come from net/tap.c, had this commit 5281d757efa6e40d74ce124be048b08d43887555 Author: Mark McLoughlin <markmc@redhat.com> Date: Thu Oct 22 17:49:07 2009 +0100 net: split all the tap code out into net/tap.c Note this commit not only moved stuff out of net.c to net/tap.c, but also rewrote large portions of the tap code, and added these completely unnecessary #includes -- as usual, I question why such a misleading commit messages are allowed. Again, no functions defined in libutil.h or util.h on *BSD are used by neither net/tap.c nor net/tap-bsd.c. Removing them. And finally, the only real user for these #includes, qemu-char.c, which actually uses openpty(). There, the #ifdef logic is wrong. A GLIBC-based system has <pty.h>, even if it is a variant of *BSD. So __GLIBC__ should be checked first, and instead of trying to include <libutil.h> or <util.h>, we include <pty.h>. If it is not GLIBC-based, we check for variations between <*util.h> as before. This patch fixes build of qemu 1.1 on Debian/kFreebsd (well, one of the two problems): it is a distribution with a FreeBSD kernel, so it #defines at least __FreeBSD_kernel__, but since it is based on GLIBC, it has <pty.h>, but current version does not have neither <util.h> nor <libutil.h>, which the code tries to include 3 times but uses only once. Signed-off-By: Michael Tokarev <mjt@tls.msk.ru> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04qemu-option: qemu_opts_create(): use error_set()Luiz Capitulino1-9/+13
This commit converts qemu_opts_create() from qerror_report() to error_set(). Currently, most calls to qemu_opts_create() can't fail, so most callers don't need any changes. The two cases where code checks for qemu_opts_create() erros are: 1. Initialization code in vl.c. All of them print their own error messages directly to stderr, no need to pass the Error object 2. The functions opts_parse(), qemu_opts_from_qdict() and qemu_chr_parse_compat() make use of the error information and they can be called from HMP or QMP. In this case, to allow for incremental conversion, we propagate the error up using qerror_report_err(), which keeps the QError semantics Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-05-14Merge remote-tracking branch 'origin/master' into stagingAnthony Liguori1-9/+14
* origin/master: sun4u: implement interrupt clearing registers sun4u: initialize OBIO interrupt mappings fix block loads broken in commit 30038fd818 Implement address masking for SPARC v9 CPUs vga: disable default VGA if appropriate -device is used cputlb: fix watchpoints handling
2012-05-12vga: disable default VGA if appropriate -device is usedPaolo Bonzini1-9/+14
This is a partial revert of commits a369da5 (vga: improve VGA logic, committed 2012-01-22) and c5bd4f3 (vga: fix -nodefaults -device VGA, 2012-01-24) which broke command-line option parsing in different ways. Since commit a369da5 it has become impossible to specify a VGA device entirely with QemuOpts-enabled options, i.e. without needing an explicit "-vga none". In addition, until commit c5bd4f3 -nodefaults would not disable the device you specified with the legacy "-vga" option, independent of the order. Since commit c5bd4f3 QEMU -nodefaults will override a previous -vga option. I did not reintroduce machine->no_vga. Boards can simply ignore the vga_interface_type variable, and most will indeed do so. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-05-10use inet_listen()/inet_connect() to support ipv6 migrationAmos Kong1-1/+6
Use help functions in qemu-socket.c for tcp migration, which already support ipv6 addresses. Currently errp will be set to UNDEFINED_ERROR when migration fails, qemu would output "migration failed: ...", and current user can see a message("An undefined error has occurred") in monitor. This patch changed tcp_start_outgoing_migration()/inet_connect() /inet_connect_opts(), socket error would be passed back, then current user can see a meaningful err message in monitor. Qemu will exit if listening fails, so output socket error to qemu stderr. For IPv6 brackets must be mandatory if you require a port. Referencing to RFC5952, the recommended format is: [2312::8274]:5200 test status: Successed listen side: qemu-kvm .... -incoming tcp:[2312::8274]:5200 client side: qemu-kvm ... (qemu) migrate -d tcp:[2312::8274]:5200 Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-10implement -no-user-config command-line option (v3)Eduardo Habkost1-1/+5
Changes v2 -> v3: - Rebase against latest qemu.git Changes v1 -> v2: - Change 'userconfig' field/variables to bool instead of int - Coding style change Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-10vl.c: change 'defconfig' variable to bool (v2)Eduardo Habkost1-2/+2
Changes v1 -> v2: - Actually change the variable type declaration to 'bool' Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-10move code to read default config files to a separate function (v2)Eduardo Habkost1-8/+2
Function added to arch_init.c because it depends on arch-specific settings. Changes v1 -> v2: - Move qemu_read_default_config_file() prototype to qemu-config.h Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-08vl: drop is_suspended variableLuiz Capitulino1-5/+2
Check for the RUN_STATE_SUSPENDED state instead. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-05-08runstate: introduce suspended stateLuiz Capitulino1-0/+7
QEMU enters in this state when the guest suspends to ram (S3). This is important so that HMP users and QMP clients can know that the guest is suspended. QMP also has an event for this, but events are not reliable and are limited (ie. a client can connect to QEMU after the event has been emitted). Having a different state for S3 brings a new issue, though. Every device that doesn't run when the VM is stopped but wants to run when the VM is suspended has to check for RUN_STATE_SUSPENDED explicitly. This is the case for the keyboard and mouse devices, for example. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-31Merge branch 'arm-devs.for-upstream' of ↵Blue Swirl1-0/+2
git://git.linaro.org/people/pmaydell/qemu-arm * 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm: pl031: switch clock base to rtc_clock pl031: rearm alarm timer upon load arm: switch real-time clocks to rtc_clock omap: switch omap_lpg to vm_clock rtc: add -rtc clock=rt
2012-03-30qtest: add test frameworkAnthony Liguori1-1/+9
The idea behind qtest is pretty simple. Instead of executing a CPU via TCG or KVM, rely on an external process to send events to the device model that the CPU would normally generate. qtest presents itself as an accelerator. In addition, a new option is added to establish a qtest server (-qtest) that takes a character device. This is what allows the external process to send CPU events to the device model. qtest uses a simple line based protocol to send the events. Documentation of that protocol is in qtest.c. I considered reusing the monitor for this job. Adding interrupts would be a bit difficult. In addition, logging would also be difficult. qtest has extensive logging support. All protocol commands are logged with time stamps using a new command line option (-qtest-log). Logging is important since ultimately, this is a feature for debugging. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-30rtc: add -rtc clock=rtPaolo Bonzini1-0/+2
This will let people use backwards-compatible semantics for devices that will be affected by the following patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-26vl.c: fix '-cpu ?' segfaultEduardo Habkost1-1/+1
Fix stupid copy&paste mistake at commit ecf40beae7dcbb057d4f115207f9d8276832a774: I moved code around but kept "optarg" on the cpu_list() call. Reported-by: Jiri Denemark <jdenemar@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-19Merge remote-tracking branch 'sstabellini/saverestore-8' into stagingAnthony Liguori1-1/+1
* sstabellini/saverestore-8: xen: do not allocate RAM during INMIGRATE runstate xen mapcache: check if memory region has moved. xen: record physmap changes to xenstore Set runstate to INMIGRATE earlier Introduce "xen-save-devices-state" cirrus_vga: do not reset videoram Conflicts: qapi-schema.json Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-19Set runstate to INMIGRATE earlierStefano Stabellini1-1/+1
Set runstate to RUN_STATE_INMIGRATE as soon as we can on resume. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-19spice: fix broken initializationAlon Levy1-0/+5
Commit 1b71f7c14fab6f00c2680d4489fbee7baf796e4f moved MODULE_INIT_QOM to way before MODULE_INIT_MACHINE, thereby breaking assumptions made in spice-core.c which registered both a type initializer and a machine intializer. This fix removes the type registration, and replaces it with calling qemu_spice_init in vl.c after command line parsing (second pass) is done, and after timers are armed, required by spice server. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-13qom: Register QOM infrastructure earlyAndreas Färber1-2/+2
The constructors for QOM TYPE_INTERFACE were executed rather late in vl.c's main(). Call them very early so that QOM can safely be used for machines and CPUs. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-12initialize CPU model list after handling -readconfig optionsEduardo Habkost1-7/+13
To properly load cpudefs using -readconfig, we have to call cpudef_init() after finishing the command-line option handling. Consequently, the handling of "-cpu ?" has to be done after the command-line option handling loop, too. Without this patch, "-readconfig configfile -cpu ?" fails to list the CPU definitions read from 'configfile'. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-02arm: add device tree supportGrant Likely1-0/+8
If compiled with CONFIG_FDT, allow user to specify a device tree file using the -dtb argument. If the machine supports it then the dtb will be loaded into memory and passed to the kernel on boot. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> [Peter Maydell: Use machine opt rather than global to pass dtb filename] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-02-27usb: Resolve warnings about unassigned bus on usb device creationJan Kiszka1-3/+4
When creating an USB device the old way, there is no way to specify the target bus. Thus the warning issued by usb_create makes no sense and rather confuses our users. Resolve this by passing a bus reference to the usbdevice_init handler and letting those handlers forward it to usb_create. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 02:23:12 +0000