| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
# gpg: Signature made Fri May 22 20:58:44 2015 BST using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/ide-pull-request:
ahci: do not remap clb/fis unconditionally
macio: move unaligned DMA write code into separate pmac_dma_write() function
macio: move unaligned DMA read code into separate pmac_dma_read() function
qtest: pre-buffer hex nibs
libqos/ahci: Swap memread/write with bufread/write
qtest: add memset to qtest protocol
qtest: Add base64 encoded read/write
qtest: allow arbitrarily long sends
qtest/ahci: add migrate halted dma test
qtest/ahci: add halted dma test
qtest/ahci: add flush migrate test
qtest/ahci: add migrate dma test
qtest/ahci: Add migration test
ich9/ahci: Enable Migration
libqos: Add migration helpers
libqos/ahci: Fix sector set method
libqos/ahci: Add halted command helpers
glib: remove stale compat functions
configure: require glib 2.22
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Instead of converting each byte one-at-a-time and then sending each byte
over the wire, use sprintf() to pre-compute all of the hex nibs into a
single buffer, then send the entire buffer all at once.
This gives a moderate speed boost to memread() and memwrite() functions.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1431021095-7558-2-git-send-email-jsnow@redhat.com
|
|
Where it makes sense, use the new faster primitives.
For generally small reads/writes such as for the PRDT
and FIS packets, stick with the more wasteful but
easier to debug memread/memwrite.
For ahci-test (before migration tests):
With this patch:
real 0m3.675s
user 0m2.582s
sys 0m1.718s
Without any qtest protocol improvements:
real 0m14.171s
user 0m12.072s
sys 0m12.527s
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1430864578-22072-6-git-send-email-jsnow@redhat.com
|
|
Previously, memset was just a frontend to write() and only
stupidly sent the pattern many times across the wire.
Let's not discuss who stupidly wrote it like that in the first place.
(Hint: It was me.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1430864578-22072-4-git-send-email-jsnow@redhat.com
|
|
For larger pieces of data that won't need to be debugged and
viewing the hex nibbles is unlikely to be useful, we can encode
data using base64 instead of encoding each byte as %02x, which
leads to some space savings and faster reads/writes.
For now, the default is left as hex nibbles in memwrite() and memread().
For the purposes of making qtest io easier to read and debug, some
callers may want to specify using the old encoding format for small
patches of data where the savings from base64 wouldn't be that profound.
memwrite/memread use a data encoding that takes 2x the size of the original
buffer, but base64 uses "only" (4/3)x, so for larger buffers we can save a
decent amount of time and space.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1430864578-22072-3-git-send-email-jsnow@redhat.com
|
|
Test migrating a halted DMA transaction.
Resume, then test data integrity.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-10-git-send-email-jsnow@redhat.com
|
|
If we're going to test the migration of halted DMA jobs,
we should probably check to make sure we can resume them
locally as a first step.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-9-git-send-email-jsnow@redhat.com
|
|
Use blkdebug to inject an error on first flush, then attempt to flush
on the first guest. When the error halts the VM, migrate to the
second VM, and attempt to resume the command.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-8-git-send-email-jsnow@redhat.com
|
|
Write to one guest, migrate, and then read from the other.
adjust ahci_io to clear any buffers it creates, so that we
can use ahci_io safely on both guests knowing we are using
empty buffers and not accidentally re-using data.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-7-git-send-email-jsnow@redhat.com
|
|
Notes:
* The migration is performed on QOSState objects.
* The migration is performed in such a way that it does not assume
consistency between the allocators attached to each. That is to say,
you can use each QOSState object completely independently and then at
an arbitrary point decide to migrate, and the destination object will
now be consistent with the memory within the source guest. The source
object that was migrated from will have a completely blank allocator.
ahci-test.c:
- verify_state is added
- ahci_migrate is added as a frontend to migrate
- test_migrate_sanity test case is added.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-6-git-send-email-jsnow@redhat.com
|
|
libqos.c:
-set_context for addressing which commands go where
-migrate performs the actual migration
malloc.c:
- Structure of the allocator is adjusted slightly with
a second-tier malloc to make swapping around the allocators
easy when we "migrate" the lists from the source to the destination.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-4-git-send-email-jsnow@redhat.com
|
|
|| probably does not mean the same thing as |.
Additionally, allow users to submit a prd_size of 0
to indicate that they'd like to continue using the default.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-3-git-send-email-jsnow@redhat.com
|
|
Sometimes we want a command to halt the VM instead
of complete successfully, so it'd be nice to let the
libqos/ahci functions cope with such scenarios.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-2-git-send-email-jsnow@redhat.com
|
|
Add a simple test case for qemu-iotests that covers read/write
with encrypted qcow2 files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Adding "-d" option. The output goes to "tee" so it appears in your
console. Also, raise the verbosity of unnitest runner.
When testing a topic branch, it's possible that a bug introduced by a
code change makes the python test case hang, with debug output, it is
much easier to locate the problem.
This can also be helpful if you want to watch the progress of a python
test, it offers you a way to sense the speed of each test case method
you're writing.
Note: because there is no easy way to get *both* the verbose output and
the output expected by ./check comparison, the case would always fail
with an "output mismatch". The sole purpose of using this option is
giving developers a quick way to debug when things go wrong.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The image is contributed by Richard W.M. Jones.
Cc: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Test zero write in byte range 512~1024 for 4k alignment.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1431522721-3266-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-22-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-13-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-11-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
suggested by Jeff Cody
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1430207220-24458-2-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Mandatory option is silly, and the error handling is missing: the
programs crash when -i isn't supplied. Make it an argument, and check
it properly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Enhance the testsuite to cover downstream events and commands.
Events worked without more tweaks, but commands needed a few final
updates in the generator to mangle names in the appropriate places.
In making those tweaks, it was easier to drop type_visitor() and
inline its actions instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Enhance the testsuite to cover downstream alternates, including
whether the branch name or type is downstream. Update the
generator to mangle alternate names in the appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Enhance the testsuite to cover downstream flat unions, including
the base type, discriminator name and type, and branch name and
type. Update the generator to mangle the union names in the
appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Enhance the testsuite to cover downstream simple unions, including
when a union branch is a downstream name. Update the generator to
mangle the union names in the appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Enhance the testsuite to cover downstream structs, including struct
members and base structs. Update the generator to mangle the
struct names in the appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Enhance the testsuite to cover a downstream enum type and enum
string. Update the generator to mangle the enum name in the
appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
staging
# gpg: Signature made Mon May 11 16:25:58 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/net-pull-request:
rocker: timestamp on the debug logs helps correlate with events in the VM
MAINTAINERS: add rocker
rocker: add tests
rocker: add new rocker switch device
pci: add network device class 'other' for network switches
pci: add rocker device ID
rocker: add register programming guide
virtio-net: use qemu_mac_strdup_printf
net: add MAC address string printer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
QMP pull request
# gpg: Signature made Mon May 11 14:15:19 2015 BST using RSA key ID E24ED5A7
# gpg: Good signature from "Luiz Capitulino <lcapitulino@gmail.com>"
* remotes/qmp-unstable/tags/for-upstream:
scripts: qmp-shell: Add verbose flag
scripts: qmp-shell: add transaction subshell
scripts: qmp-shell: Expand support for QMP expressions
scripts: qmp-shell: refactor helpers
MAINTAINERS: New maintainer for QMP and QAPI
json-parser: Accept 'null' in QMP
qobject: Add a special null QObject
qobject: Clean up around qtype_code
QJSON: Use OBJECT_CHECK
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
pc, virtio enhancements
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
acpi: update expected files for memory unplug
virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi
virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net
pci: Merge pci_nic_init() into pci_nic_init_nofail()
acpi: add a missing backslash to the \_SB scope.
qmp-event: add event notification for memory hot unplug error
acpi: add hardware implementation for memory hot unplug
acpi: fix "Memory device control fields" register
acpi: extend aml_field() to support UpdateRule
acpi, mem-hotplug: add unplug cb for memory device
acpi, mem-hotplug: add unplug request cb for memory device
acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus
docs: update documentation for memory hot unplug
virtio: coding style tweak
pci: remove hard-coded bar size in msix_init_exclusive_bar()
virtio-pci: speedup MSI-X masking and unmasking
virtio: introduce vector to virtqueues mapping
virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue
monitor: check return value of qemu_find_net_clients_except()
monitor: replace the magic number 255 with MAX_QUEUE_NUM
...
Conflicts:
hw/s390x/s390-virtio-bus.c
[PMM: fixed conflict in s390_virtio_scsi_properties and
s390_virtio_net_properties arrays; since the result of the
two conflicting patches is to empty the property arrays
completely, the conflict resolution is to remove them entirely.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add some basic test for rocker to test L2/L3/L4 functionality. Requires an
external test environment, simp, located here:
https://github.com/scottfeldman/simp
To run tests, simp environment must be installed and a suitable VM image built
and installed with a Linux 3.18 (or greater) kernel with rocker driver support
enabled.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Message-id: 1426306173-24884-8-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
We document that in QMP, the client may send any json-value
for the optional "id" key, and then return that same value
on reply (both success and failures, insofar as the failure
happened after parsing the id). [Note that the output may
not be identical to the input, as whitespace may change and
since we may reorder keys within a json-object, but that this
still constitutes the same json-value]. However, we were not
handling the JSON literal null, which counts as a json-value
per RFC 7159.
Also, down the road, given the QAPI schema of {'*foo':'str'} or
{'*foo':'ComplexType'}, we could decide to allow the QMP client
to pass { "foo":null } instead of the current representation of
{ } where omitting the key is the only way to get at the default
NULL value. Such a change might be useful for argument
introspection (if a type in older qemu lacks 'foo' altogether,
then an explicit "foo":null probe will force an easily
distinguished error message for whether the optional "foo" key
is even understood in newer qemu). And if we add default values
to optional arguments, allowing an explicit null would be
required for getting a NULL value associated with an optional
string that has a non-null default. But all that can come at a
later day.
The 'check-unit' testsuite is enhanced to test that parsing
produces the same object as explicitly requesting a reference
to the special qnull object. In addition, I tested with:
$ ./x86_64-softmmu/qemu-system-x86_64 -qmp stdio -nodefaults
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
{"execute":"qmp_capabilities","id":null}
{"return": {}, "id": null}
{"id":{"a":null,"b":[1,null]},"execute":"quit"}
{"return": {}, "id": {"a": null, "b": [1, null]}}
{"timestamp": {"seconds": 1427742379, "microseconds": 423128}, "event": "SHUTDOWN"}
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
commit c06b2ffb02bfcc642c67300d2c4dffd5aa54932b
acpi: add hardware implementation for memory hot unplug
Changed both the DSDT and the SSDT. Update the expected files
accordingly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Our type inheritance for both 'struct' and for flat 'union' merges
key/value pairs from the base class with those from the type in
question. Although the C code currently boxes things so that there
is a distinction between which member is referred to, the QMP wire
format does not allow passing a key more than once in a single
object. Besides, if we ever change the generated C code to not be
quite so boxy, we'd want to avoid duplicate member names there,
too.
Fix a testsuite entry added in an earlier patch, as well as adding
a couple more tests to ensure we have appropriate coverage. Ensure
that collisions are detected, regardless of whether there is a
difference in opinion on whether the member name is optional.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The handling of \ inside QAPI strings was less than ideal, and
really only worked JSON's \/, \\, \", and our extension of \'
(an obvious extension, when you realize we use '' instead of ""
for strings). For other things, like '\n', it resulted in a
literal 'n' instead of a newline.
Of course, at the moment, we really have no use for escaped
characters, as QAPI has to map to C identifiers, and we currently
support ASCII only for that. But down the road, we may add
support for default values for string parameters to a command
or struct; if that happens, it would be nice to correctly support
all JSON escape sequences, such as \n or \uXXXX. This gets us
closer, by supporting Unicode escapes in the ASCII range.
Since JSON does not require \OCTAL or \xXX escapes, and our QMP
implementation does not understand them either, I intentionally
reject it here, but it would be an easy addition if we desired it.
Likewise, intentionally refusing the NUL byte means we don't have
to worry about C strings being shorter than the qapi input.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
A future patch will be using a 'name':{dictionary} entry in the
QAPI schema to specify a default value for an optional argument
(see previous commit messages for more details why); but existing
use of inline nested structs conflicts with that goal. Now that
all commands have been changed to avoid inline nested structs,
nuke support for them, and turn it into a hard error. Update the
testsuite to reflect tighter parsing rules.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
A future patch will be using a 'name':{dictionary} entry in the
QAPI schema to specify a default value for an optional argument;
but existing use of inline nested structs conflicts with that goal.
More precisely, a definition in the QAPI schema associates a name
with a set of properties:
Example 1: { 'struct': 'Foo', 'data': { MEMBERS... } }
associates the global name 'Foo' with properties (meta-type struct)
and MEMBERS...
Example 2: 'mumble': TYPE
within MEMBERS... above associates 'mumble' with properties (type
TYPE) and (optional false) within type Foo
The syntax of example 1 is extensible; if we need another property,
we add another name/value pair to the dictionary (such as
'base':TYPE). The syntax of example 2 is not extensible, because
the right hand side can only be a type.
We have used name encoding to add a property: "'*mumble': 'int'"
associates 'mumble' with (type int) and (optional true). Nice,
but doesn't scale. So the solution is to change our existing uses
to be syntactic sugar to an extensible form:
NAME: TYPE --> NAME: { 'type': TYPE, 'optional': false }
*ONAME: TYPE --> ONAME: { 'type': TYPE, 'optional': true }
This patch fixes the testsuite to avoid inline nested types, by
breaking the nesting into explicit types; it means that the type
is now boxed instead of unboxed in C code, but makes no difference
on the wire (and if desired, a later patch could change the
generator to not do so much boxing in C). When touching code to
add new allocations, also convert existing allocations to
consistently prefer typesafe g_new0 over g_malloc0 when a type
name is involved.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
In the testsuite, UserDefTwo and UserDefNested were identical
structs other than the member names. Reduce code duplication by
having just one type, and choose names that also favor reuse.
This will also make it easier for a later patch to get rid of
inline nested types in QAPI. When touching code related to
allocations, convert g_malloc0(sizeof(Type)) to the more typesafe
g_new0(Type, 1).
Ensure that 'make check-qapi-schema check-unit' still passes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Referring to "type" as both a meta-type (built-in, enum, union,
alternate, or struct) and a specific type (the name that the
schema uses for declaring structs) is confusing. Do the bulk of
the conversion to "struct" in qapi schema, with a fairly
mechanical:
for f in `find -name '*.json'; do sed -i "s/'type'/'struct'/"; done
followed by manually filtering out the places where we have a
'type' embedded in 'data'. Then tweak a couple of tests whose
output changes slightly due to longer lines.
I also verified that the generated files for QMP and QGA (such
as qmp-commands.h) are the same before and after, as assurance
that I didn't leave in any accidental member name changes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Referring to "type" as both a meta-type (built-in, enum, union,
alternate, or struct) and a specific type (the name that the
schema uses for declaring structs) is confusing. The confusion
is only made worse by the fact that the generator mostly already
refers to struct even when dealing with expr['type']. This
commit changes the generator to consistently refer to it as
struct everywhere, plus a single back-compat tweak that allows
accepting the existing .json files as-is, so that the meat of
this change is separate from the mindless churn of that change.
Fix the testsuite fallout for error messages that change, and
in some cases, become more legible. Improve comments to better
match our intentions where a struct (rather than any complex
type) is required. Note that in some cases, an error message
now refers to 'struct' while the schema still refers to 'type';
that will be cleaned up in the later commit to the schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Now that we have a way to validate every type, we can also be
stricter about enforcing that callers that want to bypass
type safety in generated code. Prior to this patch, it didn't
matter what value was associated with the key 'gen', but it
looked odd that 'gen':'yes' could result in bypassing the
generated code. These changes also enforce the changes made
earlier in the series for documentation and consolidation of
using '**' as the wildcard type, as well as 'gen':false as the
canonical spelling for requesting type bypass.
Note that 'gen':false is a one-way switch away from the default;
we do not support 'gen':true (similar for 'success-response').
In practice, this doesn't matter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
...or an array of dictionaries. Although we have to cater to
existing commands, returning a non-dictionary means the command
is not extensible (no new name/value pairs can be added if more
information must be returned in parallel). By making the
whitelist explicit, any new command that falls foul of this
practice will have to be self-documenting, which will encourage
developers to either justify the action or rework the design to
use a dictionary after all.
It's a little bit sloppy that we share a single whitelist among
three clients (it's too permissive for each). If this is a
problem, a future patch could tighten things by having the
generator take the whitelist as an argument (as in
scripts/qapi-commands.py --legacy-returns=...), or by having
the generator output C code that requires explicit use of the
whitelist (as in:
#ifndef FROBNICATE_LEGACY_RETURN_OK
# error Command 'frobnicate' should return a dictionary
#endif
then having the callers define appropriate macros). But until
we need such fine-grained separation (if ever), this patch does
the job just fine.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Previous commits demonstrated that the generator overlooked various
bad naming situations:
- types, commands, and events need a valid name
- enum members must be valid names, when combined with prefix
- union and alternate branches cannot be marked optional
Valid upstream names match [a-zA-Z][a-zA-Z0-9_-]*; valid downstream
names match __[a-zA-Z][a-zA-Z0-9._-]*. Enumerations match the
weaker [a-zA-Z0-9._-]+ (in part thanks to QKeyCode picking an enum
that starts with a digit, which we can't change now due to
backwards compatibility). Rather than call out three separate
regex, this patch just uses a broader combination that allows both
upstream and downstream names, as well as a small hack that
realizes that any enum name is merely a suffix to an already valid
name prefix (that is, any enum name is valid if prepending _ fits
the normal rules).
We could reject new enumeration names beginning with a digit by
whitelisting existing exceptions. We could also be stricter
about the distinction between upstream names (no leading
underscore, no use of dot) and downstream (mandatory leading
double underscore), but it is probably not worth the bother.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Now that we know every expression is valid with regards to
its keys, we can add further tests that those keys refer to
valid types. With this patch, all uses of a type (the 'data':
of command, type, union, alternate, and event; the 'returns':
of command; the 'base': of type and union) must resolve to an
appropriate subset of metatypes declared by the current qapi
parse; this includes recursing into each member of a data
dictionary. Dealing with '**' and nested anonymous structs
will be done in later patches.
Update the testsuite to match improved output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Demonstrate that the qapi generator silently parses confusing
types, which may cause other errors later on. Later patches
will update the expected results as the generator is made stricter.
Most of the new tests focus on blatant errors. But
returns-whitelist is a case where we have historically allowed
returning something other than a JSON object from particular
commands; we have to keep that behavior to avoid breaking clients,
but it would be nicer to avoid adding such commands in the future,
because any return that is not an (array of) object cannot be
easily extended if future qemu wants to return additional
information. The QMP protocol already documents that clients
should ignore unknown dictionary keys, but does not require
clients to have to handle more than one type of JSON object.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
For a few QMP commands, we are forced to pass an arbitrary type
without tracking it properly in QAPI. Among the existing clients,
this unnamed type was spelled 'dict', 'visitor', and '**'; this
patch standardizes on '**', matching the documentation changes
earlier in the series.
Meanwhile, for the 'gen' key, we have been ignoring the value,
although the schema consistently used "'no'" ('success-response'
was hard-coded to checking for 'no'). But now that we can support
a literal "false" in the schema, we might as well use that rather
than ignoring the value or special-casing a random string. Note
that these are one-way switches (use of 'gen':true is not the same
as omitting 'gen'). Also, the use of '**' requires 'gen':false,
but the use of 'gen':false does not mandate the use of '**'.
There is no difference to the generated code. Add some tests on
what we'd like to guarantee, although it will take later patches
to clean up test results and actually enforce the use of a bool
parameter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
In the near term, we will use it for a sensible-looking
'gen':false inside command declarations, instead of the
current ugly 'gen':'no'.
In the long term, it will allow conversion from shorthand
with defaults mentioned only in side-band documentation:
'data':{'*flag':'bool', '*string':'str'}
into an explicit default value documentation, as in:
'data':{'flag':{'type':'bool', 'optional':true, 'default':true},
'string':{'type':'str', 'optional':true, 'default':null}}
We still don't parse integer values (also necessary before
we can allow explicit defaults), but that can come in a later
series.
Update the testsuite to match an improved error message.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The previous commit demonstrated that the generator overlooked
duplicate expressions:
- a complex type or command reusing a built-in type name
- redeclaration of a type name, whether by the same or different
metatype
- redeclaration of a command or event
- collision of a type with implicit 'Kind' enum for a union
- collision with an implicit MAX enum constant
Since the c_type() function in the generator treats all names
as being in the same namespace, this patch adds a global array
to track all known names and their source, to prevent collisions
before it can cause further problems. While valid .json files
won't trigger any of these cases, we might as well be nicer to
developers that make a typo while trying to add new QAPI code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
