summaryrefslogtreecommitdiff
path: root/tcg
AgeCommit message (Collapse)AuthorFilesLines
2015-08-01tcg/mips: fix add2Aurelien Jarno1-0/+3
The add2 code in the tcg_out_addsub2 function doesn't take into account the case where rl == al == bl. In that case we can't compute the carry after the addition. As it corresponds to a multiplication by 2, the carry bit is the bit 31. While this is a corner case, this prevents x86-64 guests to boot on a MIPS host. Cc: qemu-stable@nongnu.org Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-08-01tcg/s390x: Mask TCGMemOp appropriately for indexingAurelien Jarno1-2/+2
Commit 2b7ec66f fixed TCGMemOp masking following the MO_AMASK addition, but two cases were forgotten in the TCG S390 backend. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-08-01tcg/mips: Mask TCGMemOp appropriately for indexingAurelien Jarno1-2/+2
Commit 2b7ec66f fixed TCGMemOp masking following the MO_AMASK addition, but two cases were forgotten in the TCG MIPS backend. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-08-01tcg/mips: fix TLB loading for BE host with 32-bit guestsAurelien Jarno1-1/+3
For 32-bit guest, we load a 32-bit address from the TLB, so there is no need to compensate for the low or high part. This fixes 32-bit guests on big-endian hosts. Cc: qemu-stable@nongnu.org Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-07-27tcg: mark temps as mem_coherent = 0 for mov with a constantAurelien Jarno1-0/+1
When a constant has to be loaded in a mov op, we fail to set mem_coherent = 0. This patch fixes that. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1437994568-7825-3-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-07-27tcg: correctly mark dead inputs for mov with a constantAurelien Jarno1-0/+3
When tcg_reg_alloc_mov propagate a constant, we failed to correctly mark a temp as dead if the liveness analysis hints so. This fixes the following assert when configure with --enable-debug-tcg: qemu-x86_64: tcg/tcg.c:1827: tcg_reg_alloc_bb_end: Assertion `ts->val_type == TEMP_VAL_DEAD' failed. Cc: Richard Henderson <rth@twiddle.net> Reported-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1437994568-7825-2-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-07-23tcg/optimize: fix tcg_opt_gen_moviAurelien Jarno1-1/+1
Due to a copy&paste, the new op value is tested against mov_i32 instead of movi_i32. The test is therefore always false. Fix that. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1436544211-2769-1-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-07-23tcg/aarch64: use 32-bit offset for 32-bit softmmu emulationRichard Henderson1-6/+6
Similar to the same fix for user-mode, except this instance occurs on the softmmu path. Again, the tlb addend must be the base register, while the guest address is the index. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-07-23tcg/aarch64: use 32-bit offset for 32-bit user-mode emulationPaolo Bonzini1-10/+16
Thanks to the previous patch, it is now easy for tcg_out_qemu_ld and tcg_out_qemu_st to use a 32-bit zero extended offset. However, the guest base register x28 must be the base and addr_reg must be the index. Reported-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1436974021-28978-3-git-send-email-pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-07-23tcg/aarch64: add ext argument to tcg_out_insn_3310Paolo Bonzini1-19/+22
The new argument lets you pick uxtw or uxtx mode for the offset register. For now, all callers pass TCG_TYPE_I64 so that uxtx is generated. The bits for uxtx are removed from I3312_TO_I3310. Reported-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1436974021-28978-2-git-send-email-pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-07-23tcg/i386: Extend addresses for 32-bit guestsRichard Henderson1-42/+72
Removing the ??? comment explaining why it (mostly) worked. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1437081950-7206-2-git-send-email-rth@twiddle.net>
2015-07-13tci: Fix regression with INDEX_op_qemu_st_i32, INDEX_op_qemu_st_i64Stefan Weil1-6/+0
Commit 59227d5d45bb3c31dc2118011691c35b3c00879c did not update the code in tcg/tci/tcg-target.c for those two cases. Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-id: 1436556159-3002-1-git-send-email-sw@weilnetz.de Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-09tcg/mips: Fix build error from merged memop+mmu_idx parameterJames Hogan1-2/+2
Commit 3972ef6f830d ("tcg: Push merged memop+mmu_idx parameter to softmmu routines") caused the following build errors when building TCG for MIPS: In file included from tcg/tcg.c:258:0: tcg/mips/tcg-target.c In function ‘tcg_out_qemu_ld_slow_path’: tcg/mips/tcg-target.c:1015:22: error: ‘lb’ undeclared (first use in this function) tcg/mips/tcg-target.c In function ‘tcg_out_qemu_st_slow_path’: tcg/mips/tcg-target.c:1058:22: error: ‘lb’ undeclared (first use in this function) It looks like lb was meant to refer to the TCGLabelQemuLdst *l parameter, so fix both references to lb to refer to just l. Fixes: 3972ef6f830d ("tcg: Push merged memop+mmu_idx parameter to softmmu routines") Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Message-id: 1436433435-24898-2-git-send-email-james.hogan@imgtec.com Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-07tcg/s390: fix branch target change during code retranslationAurelien Jarno1-4/+8
Make sure to not modify the branch target. This ensure that the branch target is not corrupted during partial retranslation. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-26cpu-defs: Move CPU_TEMP_BUF_NLONGS to tcgPeter Crosthwaite1-0/+2
The usages of this define are pure TCG and there is no architecture specific variation of the value. Localise it to the TCG engine to remove another architecture agnostic piece from cpu-defs.h. This follows on from a28177820a868eafda8fab007561cc19f41941f4 where temp_buf was moved out of the CPU_COMMON obsoleting the need for the super early definition. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <498e8e5325c1a1aff79e5bcfc28cb760ef6b214e.1433052532.git.crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-09tcg/optimize: rename tcg_constant_foldingAurelien Jarno1-6/+1
The tcg_constant_folding folding ends up doing all the optimizations (which is a good thing to avoid looping on all ops multiple time), so make it clear and just rename it tcg_optimize. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1433447607-31184-6-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-09tcg/optimize: fold constant test in tcg_opt_gen_movAurelien Jarno1-53/+36
Most of the calls to tcg_opt_gen_mov are preceeded by a test to check if the source temp is a constant. Fold that into the tcg_opt_gen_mov function. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1433495958-9508-1-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-09tcg/optimize: fold temp copies test in tcg_opt_gen_movAurelien Jarno1-18/+9
Each call to tcg_opt_gen_mov is preceeded by a test to check if the source and destination temps are copies. Fold that into the tcg_opt_gen_mov function. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1433447607-31184-4-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-09tcg/optimize: remove opc argument from tcg_opt_gen_movAurelien Jarno1-7/+7
We can get the opcode using the TCGOp pointer. It needs to be dereferenced, but it's anyway done a few lines below to write the new value. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1433447607-31184-3-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-09tcg/optimize: remove opc argument from tcg_opt_gen_moviAurelien Jarno1-20/+20
We can get the opcode using the TCGOp pointer. It needs to be dereferenced, but it's anyway done a few lines below to write the new value. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1433447607-31184-2-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-09tcg: fix dead computation for repeated input argumentsAurelien Jarno1-3/+11
When the same temp is used twice or more as an input argument to a TCG instruction, the dead computation code doesn't recognize the second use as a dead temp. This is because the temp is marked as live in the same loop where dead inputs are checked. The fix is to split the loop in two parts. This avoid emitting a move and using a register for the movcond instruction when used as "move if true" on x86-64. This might bring more improvements on RISC TCG targets which don't have outputs aliased to inputs. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1433447228-29425-3-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-09tcg: fix register allocation with two aliased dead inputsAurelien Jarno1-0/+10
For TCG ops with two outputs registers (add2, sub2, div2, div2u), when the same input temp is used for the two inputs aliased to the two outputs, and when these inputs are both dead, the register allocation code wrongly assigned the same register to the same output. This happens for example with sub2 t1, t2, t3, t3, t4, t5, when t3 is not used anymore after the TCG op. In that case the same register is used for t1, t2 and t3. The fix is to look for already allocated aliased input when allocating a dead aliased input and check that the register is not already used. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1433447228-29425-2-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-09tcg: Handle MO_AMASK in tcg_dump_opsRichard Henderson1-3/+12
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Tested-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-09tcg: Mask TCGMemOp appropriately for indexingRichard Henderson7-30/+30
The addition of MO_AMASK means that places that used inverted masks need to be changed to use positive masks, and places that failed to mask the intended bits need updating. Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Tested-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-03tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITSPaolo Bonzini9-0/+10
This will be used to size the TLB when more than 8 MMU modes are used by the target. Limitations come from the limited size of the immediate fields (which sometimes, as in the case of Aarch64, extend to instructions that shift the immediate). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03tci: do not use CPUArchState in tcg-target.hPaolo Bonzini2-3/+4
tcg-target.h does not use any QEMU-specific symbols, save for tci's usage of CPUArchState. Pull that up to tcg/tcg.h. This will make it possible to include tcg-target.h in cpu-defs.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-05-14tcg: Add MO_ALIGN, MO_UNALNRichard Henderson1-0/+13
These modifiers control, on a per-memory-op basis, whether unaligned memory accesses are allowed. The default setting reflects the target's definition of ALIGNED_ONLY. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-05-14tcg: Push merged memop+mmu_idx parameter to softmmu routinesRichard Henderson10-113/+112
The extra information is not yet used but it is now available. This requires minor changes through all of the tcg backends. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-05-14tcg: Merge memop and mmu_idx parameters to qemu_ld/stRichard Henderson14-61/+130
At the tcg opcode level, not at the tcg-op.h generator level. This requires minor changes through all of the tcg backends, but none of the cpu translators. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-05-05tcg: optimise memory layout of TCGTempEmilio G. Cota1-12/+14
This brings down the size of the struct from 56 to 32 bytes on 64-bit, and to 20 bytes on 32-bit. This leads to memory savings: Before: $ find . -name 'tcg.o' | xargs size text data bss dec hex filename 41131 29800 88 71019 1156b ./aarch64-softmmu/tcg/tcg.o 37969 29416 96 67481 10799 ./x86_64-linux-user/tcg/tcg.o 39354 28816 96 68266 10aaa ./arm-linux-user/tcg/tcg.o 40802 29096 88 69986 11162 ./arm-softmmu/tcg/tcg.o 39417 29672 88 69177 10e39 ./x86_64-softmmu/tcg/tcg.o After: $ find . -name 'tcg.o' | xargs size text data bss dec hex filename 40883 29800 88 70771 11473 ./aarch64-softmmu/tcg/tcg.o 37473 29416 96 66985 105a9 ./x86_64-linux-user/tcg/tcg.o 38858 28816 96 67770 108ba ./arm-linux-user/tcg/tcg.o 40554 29096 88 69738 1106a ./arm-softmmu/tcg/tcg.o 39169 29672 88 68929 10d41 ./x86_64-softmmu/tcg/tcg.o Note that using an entire byte for some enums that need less than that wastes a few bits (noticeable in 32 bits, where we use 20 bytes instead of 16) but avoids extraction code, which overall is a win--I've tested several variations of the patch, and the appended is the best performer for OpenSSL's bntest by a very small margin: Before: $ taskset -c 0 perf stat -r 15 -- x86_64-linux-user/qemu-x86_64 img/bntest-x86_64 >/dev/null [...] Performance counter stats for 'x86_64-linux-user/qemu-x86_64 img/bntest-x86_64' (15 runs): 10538.479833 task-clock (msec) # 0.999 CPUs utilized ( +- 0.38% ) 772 context-switches # 0.073 K/sec ( +- 2.03% ) 0 cpu-migrations # 0.000 K/sec ( +-100.00% ) 2,207 page-faults # 0.209 K/sec ( +- 0.08% ) 10.552871687 seconds time elapsed ( +- 0.39% ) After: $ taskset -c 0 perf stat -r 15 -- x86_64-linux-user/qemu-x86_64 img/bntest-x86_64 >/dev/null Performance counter stats for 'x86_64-linux-user/qemu-x86_64 img/bntest-x86_64' (15 runs): 10459.968847 task-clock (msec) # 0.999 CPUs utilized ( +- 0.30% ) 739 context-switches # 0.071 K/sec ( +- 1.71% ) 0 cpu-migrations # 0.000 K/sec ( +- 68.14% ) 2,204 page-faults # 0.211 K/sec ( +- 0.10% ) 10.473900411 seconds time elapsed ( +- 0.30% ) Suggested-by: Stefan Weil <sw@weilnetz.de> Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-04-30tcg: Delete unused cpu_pc_from_tb()Peter Crosthwaite1-2/+4
No code uses the cpu_pc_from_tb() function. Delete from tricore and arm which each provide an unused implementation. Update the comment in tcg.h to reflect that this is obsoleted by synchronize_from_tb. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-09tcg/tcg-op.c: Fix ld/st of 64 bit values on 32-bit bigendian hostsPeter Maydell1-2/+2
Commit 951c6300f7 out-of-lined the 32-bit-host versions of tcg_gen_{ld,st}_i64, but in the process it inadvertently changed an #ifdef HOST_WORDS_BIGENDIAN to #ifdef TCG_TARGET_WORDS_BIGENDIAN. Since the latter doesn't get defined anywhere this meant we always took the "LE host" codepath, and stored the two halves of the value in the wrong order on BE hosts. This typically breaks any 64-bit guest on a 32-bit BE host completely, and will have possibly more subtle effects even for 32-bit guests. Switch the ifdef back to HOST_WORDS_BIGENDIAN. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Tested-by: Andreas Färber <afaerber@suse.de> Message-id: 1428523029-13620-1-git-send-email-peter.maydell@linaro.org
2015-03-16tcg/optimize: Handle or r,a,a with constant aRichard Henderson1-1/+4
As seen with ubuntu-5.10-live-powerpc.iso. Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Complete handling of ALWAYS and NEVERRichard Henderson1-5/+17
Missing from movcond, and brcondi_i32 (but not brcondi_i64). Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Use tcg_malloc to allocate TCGLabelRichard Henderson2-24/+23
Pre-allocating 512 of them per TB is a waste. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Change generator-side labels to a pointerRichard Henderson10-125/+108
This is less about improved type checking than enabling a subsequent change to the representation of labels. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Stefan Weil <sw@weilnetz.de> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Change translator-side labels to a pointerRichard Henderson5-31/+60
This is improved type checking for the translators -- it's no longer possible to accidentally swap arguments to the branch functions. Note that the code generating backends still manipulate labels as int. With notable exceptions, the scope of the change is just a few lines for each target, so it's not worth building extra machinery to do this change in per-target increments. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg-ia64: Use tcg_malloc to allocate TCGLabelQemuLdstRichard Henderson1-11/+8
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Use tcg_malloc to allocate TCGLabelQemuLdstRichard Henderson1-14/+12
Pre-allocating 640 of them per TB is a waste. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Remove unused opcodesRichard Henderson2-14/+2
We no longer need INDEX_op_end to terminate the list, nor do we need 5 forms of nop, since we just remove the TCGOp instead. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Implement insert_op_beforeRichard Henderson3-44/+35
Rather reserving space in the op stream for optimization, let the optimizer add ops as necessary. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Remove opcodes instead of noping them outRichard Henderson3-11/+32
With the linked list scheme we need not leave nops in the stream that we need to process later. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Put opcodes in a linked listRichard Henderson4-495/+415
The previous setup required ops and args to be completely sequential, and was error prone when it came to both iteration and optimization. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Introduce tcg_op_buf_count and tcg_op_buf_fullRichard Henderson1-0/+12
The method by which we count the number of ops emitted is going to change. Abstract that away into some inlines. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Reduce ifdefs in tcg-op.cRichard Henderson1-242/+207
Almost completely eliminates the ifdefs in this file, improving confidence in the lesser used 32-bit builds. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Move some opcode generation functions out of lineRichard Henderson4-2244/+2314
Some of these functions are really quite large. We have a number of things that ought to be circularly dependent, but we duplicated code to break that chain for the inlines. This saved 25% of the code size of one of the translators I examined. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-12-17tcg: add separate monitor command to dump opcode countersMax Filippov2-4/+9
Currently 'info jit' outputs half of the information to monitor and the rest to qemu log. Dumping opcode counts to monitor as a part of 'info jit' command doesn't sound useful. Add new monitor command 'info opcount' that only dumps opcode counters. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2014-11-02tcg/mips: fix store softmmu slow pathAurelien Jarno1-1/+1
Commit 9d8bf2d1 moved the softmmu slow path out of line and introduce a regression at the same time by always calling tcg_out_tlb_load with is_load=1. This makes impossible to run any significant code under qemu-system-mips*. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-09-29tcg: Always enable TCGv type checkingRichard Henderson1-55/+34
Instead of using structures, which imply some amount of overhead on certain ABIs, use pointer types. This actually reduces the size of the binaries vs a NON-debug build on ppc64 and x86_64, due to a reduction in the number of sign-extension insns. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-09-29tcg-aarch64: Use 32-bit loads for qemu_ld_i32Richard Henderson2-14/+18
The "old" qemu_ld opcode did not specify the size of the result, and so we had to assume full register width. With the new opcodes, we can narrow the result. Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 16:37:55 +0000