summaryrefslogtreecommitdiff
path: root/tcg/i386
AgeCommit message (Collapse)AuthorFilesLines
2015-09-02tcg/i386: omit a few REXW prefixes in softmmu codeAurelien Jarno1-6/+9
When computing the TLB address we are likely to mask out the high 32-bits by using shr + and. We can use 32-bit instructions in that case. This saves 2 bytes per TLB access. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1437306632-20655-1-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24linux-user: remove useless macros GUEST_BASE and RESERVED_VALaurent Vivier1-11/+11
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base and the macros GUEST_BASE and RESERVED_VA become useless: replace them by their values. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg/i386: use softmmu fast path for unaligned accessesAurelien Jarno1-9/+13
Softmmu unaligned load/stores currently goes through through the slow path for two reasons: - to support unaligned access on host with strict alignement - to correctly handle accesses crossing pages x86 is only concerned by the second reason. Unaligned accesses are avoided by compilers, but are not uncommon. We therefore would like to see them going through the fast path, if they don't cross pages. For that we can use the fact that two adjacent TLB entries can't contain the same page. Therefore accessing the TLB entry corresponding to the first byte, but comparing its content to page address of the last byte ensures that we don't cross pages. We can do this check without adding more instructions in the TLB code (but increasing its length by one byte) by using the LEA instruction to combine the existing move with the size addition. On an x86-64 host, this gives a 3% boot time improvement for a powerpc guest and 4% for an x86-64 guest. [rth: Tidied calculation of the offset mask] Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1436467197-2183-1-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: Split trunc_shr_i32 opcode into extr[lh]_i64_i32Richard Henderson1-1/+2
Rather than allow arbitrary shift+trunc, only concern ourselves with low and high parts. This is all that was being used anyway. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: implement real ext_i32_i64 and extu_i32_i64 opsAurelien Jarno1-0/+5
Implement real ext_i32_i64 and extu_i32_i64 ops. They ensure that a 32-bit value is always converted to a 64-bit value and not propagated through the register allocator or the optimizer. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Stefan Weil <sw@weilnetz.de> Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: rename trunc_shr_i32 into trunc_shr_i64_i32Aurelien Jarno1-1/+1
The op is sometimes named trunc_shr_i32 and sometimes trunc_shr_i64_i32, and the name in the README doesn't match the name offered to the frontends. Always use the long name to make it clear it is a size changing op. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-07-23tcg/i386: Extend addresses for 32-bit guestsRichard Henderson1-42/+72
Removing the ??? comment explaining why it (mostly) worked. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1437081950-7206-2-git-send-email-rth@twiddle.net>
2015-06-09tcg: Mask TCGMemOp appropriately for indexingRichard Henderson1-2/+2
The addition of MO_AMASK means that places that used inverted masks need to be changed to use positive masks, and places that failed to mask the intended bits need updating. Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Tested-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-03tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITSPaolo Bonzini1-0/+1
This will be used to size the TLB when more than 8 MMU modes are used by the target. Limitations come from the limited size of the immediate fields (which sometimes, as in the case of Aarch64, extend to instructions that shift the immediate). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-05-14tcg: Push merged memop+mmu_idx parameter to softmmu routinesRichard Henderson1-19/+18
The extra information is not yet used but it is now available. This requires minor changes through all of the tcg backends. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-05-14tcg: Merge memop and mmu_idx parameters to qemu_ld/stRichard Henderson1-4/+8
At the tcg opcode level, not at the tcg-op.h generator level. This requires minor changes through all of the tcg backends, but none of the cpu translators. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Change generator-side labels to a pointerRichard Henderson1-38/+38
This is less about improved type checking than enabling a subsequent change to the representation of labels. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Stefan Weil <sw@weilnetz.de> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Change translator-side labels to a pointerRichard Henderson1-6/+6
This is improved type checking for the translators -- it's no longer possible to accidentally swap arguments to the branch functions. Note that the code generating backends still manipulate labels as int. With notable exceptions, the scope of the change is just a few lines for each target, so it's not worth building extra machinery to do this change in per-target increments. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-04tcg: Remove TCG_TARGET_HAS_new_ldstRichard Henderson1-2/+0
Since all backends have been converted, remove the compatibility code. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-04tcg-i386: Fix win64 qemu storeRichard Henderson1-1/+2
The first non-register argument isn't placed at offset 0. Cc: qemu-stable@nongnu.org Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg-i386: Make debug_frame constRichard Henderson1-21/+17
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Remove unreachable code in tcg_out_op and op_defsRichard Henderson1-19/+5
The INDEX_op_call case has just been obsoleted; the mov and movi cases have not been reachable for years. Attempt to document this both in each tcg_out_op switch, and via TCG_OPF_NOT_PRESENT. Because of the TCG_OPF_NOT_PRESENT change, this must be done for all targets in a single commit. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg-i386: Rename tcg_out_calli to tcg_out_callRichard Henderson1-3/+3
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg-i386: Define TCG_TARGET_INSN_UNIT_SIZERichard Henderson2-24/+26
And use tcg pointer differencing functions as appropriate. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Avoid undefined behaviour patching code at unaligned addressesPeter Maydell1-6/+6
To avoid C undefined behaviour when patching generated code, provide wrappers tcg_patch8/16/32/64 which use the usual memcpy trick, and use them in the i386 backend. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-28tcg: Add INDEX_op_trunc_shr_i32Richard Henderson1-0/+1
Let the backend do something special for truncation. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Use HOST_WORDS_BIGENDIANRichard Henderson1-2/+0
Instead of rolling a local TCG_TARGET_WORDS_BIGENDIAN. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Add TCGType parameter to tcg_target_const_matchRichard Henderson1-1/+1
Most 64-bit targets need to be able to ignore the high bits of a TCG_TYPE_I32 value. Suggested-by: Stuart Brady <sdb@zubnet.me.uk> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Fix warning (1 bit signed bitfield entry) and replace int by boolStefan Weil1-3/+3
Static code analyzers complain about signed bitfields with only a single bit. is_ld is used as a boolean value, so make it bool. ppc64 already used bool for the 2nd argument is_ld of the local function add_qemu_ldst_label. Modify all other TCG targets to do follow this example. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-02-21tcg/i386: Fix build for systems without working cpuid.h (MacOSX, Win32)Peter Maydell1-1/+3
Win32 doesn't have a cpuid.h, and MacOSX may have one but without the __cpuid() function we use, which means that commit 9d2eec20 broke the build for those platforms. Fix this by tightening up our configure cpuid.h check to test that the functions we need are present, and adding some missing #ifdef guards in tcg/i386/tcg-target.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-17tcg/i386: Use SHLX/SHRX/SARX instructionsRichard Henderson1-11/+50
These three-operand shift instructions do not require the shift count to be placed into ECX. This reduces the number of mov insns required, with the mere addition of a new register constraint. Don't attempt to get rid of the matching constraint, as that's impossible to manipulate with just a new constraint. In addition, constant shifts still need the matching constraint. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-02-17tcg/i386: Use ANDN instructionRichard Henderson2-13/+45
Note that the optimizer cannot simplify ANDC X,Y,C to AND X,Y,~C so we must handle constants in the implementation of andc. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-02-17tcg/i386: Add tcg_out_vex_modrmRichard Henderson1-3/+38
Prepare for emitting BMI insns which require VEX encoding. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-02-17tcg/i386: Move TCG_CT_CONST_* to tcg-target.cRichard Henderson2-3/+4
These are not needed by users of tcg-target.h. No need to recompile when we adjust them. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-01-25tcg/i386: cleanup useless #ifdefAurelien Jarno1-2/+0
TCG_TARGET_HAS_movcond_i32 is always defined to 1 in tcg-target.h, so remove the corresponding #ifdef #endif sequence, left from a previous refactoring. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-01-25tcg/i386: use movbe instruction in qemu_ldst routinesAurelien Jarno1-37/+80
The movbe instruction has been added on some Intel Atom CPUs and on recent Intel Haswell CPUs. It allows to load/store a value and at the same time bswap it. This patch detects the avaibility of this instruction and when available use it in the qemu load/store routines in replacement of load/store + bswap. Note that for 16-bit unsigned loads, movbe + movzw is basically the same as movzw + bswap, so the patch doesn't touch this case. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> [RTH: Reduced the number of conditionals using "movop".] Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-01-25tcg/i386: add support for three-byte opcodesAurelien Jarno1-8/+16
Add support for three-byte opcodes, starting with the 0x0f 0x38 prefix. Use P_EXT38 as the new constant, and shift all other constants so that P_EXT and P_EXT38 have neighbouring values. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> [RTH: Changed the name from P_EXT2 to P_EXT38.] Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-01-25tcg/i386: remove hardcoded P_REXW valueAurelien Jarno1-1/+1
P_REXW is defined has a constant at the beginning of i386/tcg-target.c, but the corresponding bit is later used in a harcoded way, which defeat the purpose of a constant. Fix that by using a conditional expression operator instead of a shift. On x86 this actually makes the code slightly smaller as GCC does in practice (opc >> 8) & 8 instead of (opc & 0x800) >> 8 so the constants are smaller to load. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-12-21tcg/i386: fix a commentAurelien Jarno1-1/+1
The comments apply to 8-bit stores, not 8-byte stores. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-10-12tcg-i386: Support new ldst opcodesRichard Henderson2-90/+51
No support for helpers with non-default endianness yet, but good enough to test the opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Remove "cb" output restriction from qemu_st8 for i386Richard Henderson1-2/+8
Once we form a combined qemu_st_i32 opcode, we won't be able to have separate constraints based on size. This one is fairly easy to work around, since eax is available as a scratch register. When storing variable data, this tends to merely exchange one mov for another. E.g. -: mov %esi,%ecx ... -: mov %cl,(%edx) +: mov %esi,%eax +: mov %al,(%edx) Where we do have a regression is when storing constant data, in which we may load the constant into edi, when only ecx/ebx ought to be used. The proper way to recover this regression is to allow constants as arguments to qemu_st_i32, so that we never load the constant data into a register at all, must less the wrong register. TBD. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Tidy softmmu routinesRichard Henderson1-249/+208
Pass two TCGReg to tcg_out_tlb_load, rather than idx+args. Move ldst_optimization routines just below tcg_out_tlb_load to avoid the need for forward declarations. Use TCGReg enum in preference to int where apprpriate. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Use TCGMemOp within qemu_ldst routinesRichard Henderson1-64/+59
Step one in the transition, with constants passed down from tcg_out_op. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add qemu_ld_st_i32/64Richard Henderson1-0/+2
Step two in the transition, adding the new ldst opcodes. Keep the old opcodes around until all backends support the new opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add tcg-be-ldst.hRichard Henderson1-27/+3
Move TCGLabelQemuLdst and related stuff out of tcg.h. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-i386: Make use of zero-extended memory helper routinesRichard Henderson1-9/+6
For 8 and 16-bit unsigned loads, rely on the zero-extension from the helper and use a smaller 32-bit move insn. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Introduce zero and sign-extended versions of load helpersRichard Henderson1-3/+3
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02exec: Split softmmu_defs.hRichard Henderson1-3/+0
The _cmmu helpers can be moved to exec-all.h. The helpers that are used from TCG will shortly need access to tcg_target_long so move their declarations into tcg.h. This requires minor include adjustments to all TCG backends. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-i386: Don't perform GETPC adjustment in TCG codeRichard Henderson1-19/+14
Since we now perform it inside the helper, no need to do it here. This also lets us perform a tail-call from the store slow path to the helper. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-i386: Adjust tcg_out_tlb_load for x32Richard Henderson1-14/+27
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-i386: Use intptr_t appropriatelyRichard Henderson1-22/+19
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change tcg_out_ld/st offset to intptr_tRichard Henderson1-2/+2
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change relocation offsets to intptr_tRichard Henderson1-1/+1
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Allow TCG_TARGET_REG_BITS to be specified independantlyRichard Henderson1-4/+6
There are several hosts for which it would be useful to use the available 64-bit registers in a 32-bit pointer environment. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change flush_icache_range arguments to uintptr_tRichard Henderson1-2/+1
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 17:31:51 +0000