summaryrefslogtreecommitdiff
path: root/target-s390x/kvm.c
AgeCommit message (Collapse)AuthorFilesLines
2016-06-16os-posix: include sys/mman.hPaolo Bonzini1-1/+0
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14s390x/kvm: Fixup interrupt type for non-adapter I/O interruptsChristian Borntraeger1-2/+3
The current algorithm for I/O interrupts would result in a wrong interrupt type for subchannel numbers fffe and ffff. In addition a non adapter interrupt might look like an adapter interrupt for any subchannel number that has the 0x0400 bit set. No kernel has ever used the type outside logging - and the logging was wrong all the time. For everything else the kernel used the interrupt parameters. Let's use the KVM_S390_INT_IO macro as for adapter interrupts. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-17s390x: enable runtime instrumentationFan Zhang1-0/+21
Introduce run-time-instrumentation support when running under kvm for virtio-ccw 2.7 machine and make sure older machines can not enable it. The new ri_allowed field in the s390MachineClass serves as an indicator whether the feature can be used by the machine and should therefore be activated if available. riccb_needed() is used to check whether riccb is needed or not in live migration. Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-03-01s390x: remove {kvm_}s390_virtio_irq()Cornelia Huck1-11/+0
This interface was only used by the old virtio machine and therefore is not needed anymore. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-03-01s390x/kvm: sync fprs via kvm_runDavid Hildenbrand1-0/+11
We can now also sync the fprs via kvm_run, avoiding one ioctl. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-29s390: Clean up includesPeter Maydell1-1/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1453832250-766-8-git-send-email-peter.maydell@linaro.org
2016-01-22fpu: Replace uint64 typedef with uint64_tPeter Maydell1-1/+1
Replace the uint64 softfloat-specific typedef with uint64_t. This change was made with find include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint64\b/uint64_t/g' together with manual removal of the typedef definition, and manual undoing of some mis-hits where macro arguments were being used for token pasting rather than as a type. Note that the target-mips/kvm.c and target-s390x/kvm.c changes are fixing code that should not have been using the uint64 type in the first place. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Leon Alrae <leon.alrae@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Message-id: 1452603315-27030-3-git-send-email-peter.maydell@linaro.org
2015-11-11s390x/kvm: don't enable CMMA when hugetlbfs will be usedDominik Dingel1-1/+3
On hugetlbfs CMMA will not be useful as every ESSA instruction will trap. So don't offer CMMA to guests with a hugepages backing. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-10-21s390x/cmma: clean up cmma resetDavid Hildenbrand1-6/+2
The cmma reset is per VM, so we don't need a cpu object. We can directly make use of kvm_state, as it is already available when the reset is called. By moving the cmma reset in our machine reset function, we can avoid a manual reset handler. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-10-21s390x: reset crypto only on clear reset and QEMU resetDavid Hildenbrand1-3/+1
Initializing VM crypto in initial cpu reset has multiple problems 1. We call the exact same function #VCPU times, although one time is enough 2. On SIGP initial cpu reset, we exchange the wrapping key while other VCPUs are running. Bad! 3. It is simply wrong. According to the Pop, a reset happens only during a clear reset. So, we have to reset the keys - on modified clear reset - on load clear (QEMU reset - via machine reset) - on qemu start (via machine reset) Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-10-20s390x: flagify mcic valuesCornelia Huck1-4/+19
Instead of using magic values when building the machine check interruption code, add some defines as by chapter 11-14 in the PoP. This should make it easier to catch problems like the missing vector register validity bit ("s390x/kvm: Fix vector validity bit in device machine checks"), and less hassle should we want to generate machine checks beyond the channel reports we currently support. Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-10-20s390x/kvm: Fix vector validity bit in device machine checksChristian Borntraeger1-0/+3
Device hotplugs trigger a crw machine check. All machine checks have validity bits for certain register types. With vector support we also have to claim that vector registers are valid. This is a band-aid suitable for stable. Long term we should create the full mcic value dynamically depending on the active features in the kernel interrupt handler. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-10-19kvm: Pass PCI device pointer to MSI routing functionsPavel Fedin1-1/+1
In-kernel ITS emulation on ARM64 will require to supply requester IDs. These IDs can now be retrieved from the device pointer using new pci_requester_id() function. This patch adds pci_dev pointer to KVM GSI routing functions and makes callers passing it. x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c also made passing PCI device pointer instead of NULL for consistency with the rest of the code. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-9/+2
* Support for jemalloc * qemu_mutex_lock_iothread "No such process" fix * cutils: qemu_strto* wrappers * iohandler.c simplification * Many other fixes and misc patches. And some MTTCG work (with Emilio's fixes squashed): * Signal-free TCG kick * Removing spinlock in favor of QemuMutex * User-mode emulation multi-threading fixes/docs # gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (44 commits) cutils: work around platform differences in strto{l,ul,ll,ull} cpu-exec: fix lock hierarchy for user-mode emulation exec: make mmap_lock/mmap_unlock globally available tcg: comment on which functions have to be called with mmap_lock held tcg: add memory barriers in page_find_alloc accesses remove unused spinlock. replace spinlock by QemuMutex. cpus: remove tcg_halt_cond and tcg_cpu_thread globals cpus: protect work list with work_mutex scripts/dump-guest-memory.py: fix after RAMBlock change configure: Add support for jemalloc add macro file for coccinelle configure: factor out adding disas configure vhost-scsi: fix wrong vhost-scsi firmware path checkpatch: remove tests that are not relevant outside the kernel checkpatch: adapt some tests to QEMU CODING_STYLE: update mixed declaration rules qmp: Add example usage of strto*l() qemu wrapper cutils: Add qemu_strtoull() wrapper cutils: Add qemu_strtoll() wrapper ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-11typofixes - v4Veres Lajos1-2/+2
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-07Added generic panic handler qemu_system_guest_panicked()Andrey Smetanin1-9/+2
There are pieces of guest panic handling code that can be shared in one generic function. These code replaced by call qemu_system_guest_panicked(). Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1435924905-8926-10-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-01kvm: First step to push iothread lock out of inner run loopJan Kiszka1-0/+3
This opens the path to get rid of the iothread lock on vmexits in KVM mode. On x86, the in-kernel irqchips has to be used because we otherwise need to synchronize APIC and other per-cpu state accesses that could be changed concurrently. Regarding pre/post-run callbacks, s390x and ARM should be fine without specific locking as the callbacks are empty. MIPS and POWER require locking for the pre-run callback. For the handle_exit callback, it is non-empty in x86, POWER and s390. Some POWER cases could do without the locking, but it is left in place for now. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1434646046-27150-7-git-send-email-pbonzini@redhat.com>
2015-06-22Include monitor/monitor.h exactly where neededMarkus Armbruster1-1/+0
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Move #include out of qerror.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-11s390x/kvm: diag288 instruction interception and handlingXu Wang1-0/+18
Intercept the diag288 requests from kvm guests, and hand the requested command to the diag288 watchdog device for further handling. Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-09Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150609' into ↵Peter Maydell1-3/+4
staging s390x/virtio-ccw: migration and virtio for 2.4 1. Migration fixups 2. virtio 9pfs # gpg: Signature made Tue Jun 9 09:00:05 2015 BST using RSA key ID B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" * remotes/borntraeger/tags/s390x-20150609: s390x/migration: add comment about floating point migration s390x/kvm: always ignore empty vcpu interrupt state virtio-ccw/migration: Migrate config vector for virtio devices virtio-ccw: add support for 9pfs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-03s390x/kvm: always ignore empty vcpu interrupt stateSascha Silbe1-3/+4
kvm_s390_vcpu_interrupt_pre_save() and kvm_s390_vcpu_interrupt_post_load() are essentially no-ops on hosts without KVM_CAP_S390_IRQ_STATE. Move the capability check after the check for saved IRQ state in kvm_s390_vcpu_interrupt_post_load() so that migration between hosts without KVM_CAP_S390_IRQ_STATE (including save / restore on the same host) continues to work. Fixes: 3cda44f7bae5 ("s390x/kvm: migrate vcpu interrupt state") Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-02kvm: introduce kvm_arch_msi_data_to_gsiEric Auger1-0/+5
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI) ID. This latter equals to the SPI index + 32. to retrieve the SPI index, matching the gsi, an architecture specific function is introduced. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-27s390x: Enable vector processing capabilityEric Farman1-0/+1
Everything is finally in place, inform the kernel that user space supports vector registers. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Store Additional Status SIGP orderEric Farman1-0/+55
Add handling for the Store Additional Status at Address order that exists for the Signal Processor (SIGP) instruction. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Vector Register IOCTLsEric Farman1-16/+33
Handle the actual syncing of the vector registers with kernel space, via the get/put register IOCTLs. The vector registers that were introduced with the z13 overlay the existing floating point registers. FP registers 0-15 are the high-halves of vector registers 0-15. Thus, remove the freg fields and replace them with the equivalent vector field to avoid errors in duplication. Moreover, synchronize either the vector registers via kvm_sync_regs, or floating point registers via the GET/SET FPU IOCTLs. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Common access to floating point registersEric Farman1-3/+6
Provide a routine to access the correct floating point register, to simplify future expansion. Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-11Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+3
- build bugfix from Fam and new configure check from Emilio - two improvements to "info mtere" from Gerd - KVM support for memory transaction attributes - one more small step towards unlocked MMIO dispatch - one piece of the qemu-nbd errno fixes - trivial-ish patches from Denis and Thomas # gpg: Signature made Fri May 8 13:47:29 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: qemu-nbd: only send a limited number of errno codes on the wire rules.mak: Force CFLAGS for all objects in DSO configure: require __thread support exec: move rcu_read_lock/unlock to address_space_translate callers kvm: add support for memory transaction attributes mtree: also print disabled regions mtree: tag & indent a bit better apic_common: improve readability of apic_reset_common kvm: Silence warning from valgrind Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-08s390x/kvm: migrate vcpu interrupt stateJens Freimann1-0/+55
This patch adds support to migrate vcpu interrupts. We use ioctl KVM_S390_GET_IRQ_STATE and _SET_IRQ_STATE to get/set the complete interrupt state for a vcpu. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-08s390x/kvm: use ioctl KVM_S390_IRQ for vcpu interruptsJens Freimann1-2/+20
KVM_S390_INT uses only two parameter fields. This is not enough to pass all required information for certain interrupts. A new ioctl KVM_S390_IRQ is available which allows us to inject all local interrupts as defined in the Principles of Operation. It takes a struct kvm_s390_irq as a parameter which can store interrupt payload data for all interrupts. Let's use the new ioctl for injecting vcpu interrupts. Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30kvm: add support for memory transaction attributesPaolo Bonzini1-1/+3
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs. These are then passed to address_space_rw. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-30s390x/kvm: Support access register mode for KVM_S390_MEM_OP ioctlAlexander Yarygin1-16/+30
Access register mode is one of the modes that control dynamic address translation. In this mode the address space is specified by values of the access registers. The effective address-space-control element is obtained from the result of the access register translation. See the "Access-Register Introduction" section of the chapter 5 "Program Execution" in "Principles of Operations" for more details. When the CPU is in AR mode, the s390_cpu_virt_mem_rw() function must know which access register number to use for address translation. This patch does several things: - add new parameter 'uint8_t ar' to that function - decode ar number from intercepted instructions - pass the ar number to s390_cpu_virt_mem_rw(), which in turn passes it to the KVM_S390_MEM_OP ioctl. Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30s390x/mmu: Use ioctl for reading and writing from/to guest memoryThomas Huth1-0/+40
Add code to make use of the new ioctl for reading from / writing to virtual guest memory. By using the ioctl, the memory accesses are now protected with the so-called ipte-lock in the kernel. [CH: moved error message into kvm_s390_mem_op()] Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30s390x/kvm: Put vm name, extended name and UUID into STSI322 SYSIBEkaterina Tumanova1-0/+71
KVM prefills the SYSIB, returned by STSI 3.2.2. This patch allows userspace to intercept execution, and fill in the values, that are known to qemu: machine name (8 chars), extended machine name (256 chars), extended machine name encoding (equals 2 for UTF-8) and UUID. STSI322 qemu handler also finds a highest virtualization level in level-3 virtualization stack that doesn't support Extended Names (Ext Name delimiter) and propagates zero Ext Name to all levels below, because this level is not capable of managing Extended Names of lower levels. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16s390x: CPACF: Handle key wrap machine optionsTony Krowiak1-0/+51
Check for the aes_key_wrap and dea_key_wrap machine options and set the appropriate KVM device attribute(s) to tell the kernel to enable or disable the AES/DEA protected key functions for the guest domain. This patch introduces two new machine options for indicating the state of AES/DEA key wrapping functions. This controls whether the guest will have access to the AES/DEA crypto functions. aes_key_wrap="on | off" is changed to aes-key-wrap="on | off" dea_key_wrap="on | off" is changed to dea-key-wrap="on | off" Check for the aes-key-wrap and dea-key-wrap machine options and set the appropriate KVM device attribute(s) to tell the kernel to enable or disable the AES/DEA protected key functions for the guest domain. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1426164834-38648-4-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16s390x/kvm: make use of generic vm attribute checkDominik Dingel1-35/+7
By using the new introduced generic interface we can remove redundancies and clean up. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Suggested-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1426164834-38648-3-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16s390x/kvm: Guest Migration TOD clock synchronizationJason J. Herne1-0/+39
Synchronizes the guest TOD clock across a migration by sending the guest TOD clock value to the destination system. If the guest TOD clock is not preserved across a migration then the guest's view of time will snap backwards if the destination host clock is behind the source host clock. This will cause the guest to hang immediately upon resuming on the destination system. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1425912968-54387-1-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-12Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-1/+1
misc fixes and cleanups A bunch of fixes all over the place, some of the bugs fixed are actually regressions. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (25 commits) virtio-scsi: remove empty wrapper for cmd virtio-scsi: clean out duplicate cdb field virtio-scsi: fix cdb/sense size uapi/virtio_scsi: allow overriding CDB/SENSE size virtio-scsi: drop duplicate CDB/SENSE SIZE exec: don't include hw/boards for linux-user acpi: specify format for build_append_namestring MAINTAINERS: drop aliguori@amazon.com tpm: Move memory subregion function into realize function virtio-pci: Convert to realize() pci: Convert pci_nic_init() to Error to avoid qdev_init() machine: query mem-merge machine property machine: query dump-guest-core machine property hw/boards: make it safe to include for linux-user machine: query phandle-start machine property machine: query kvm-shadow-mem machine property kvm: add machine state to kvm_arch_init machine: query kernel-irqchip property machine: allowed/required kernel-irqchip support machine: replace qemu opts with iommu property ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11kvm: add machine state to kvm_arch_initMarcel Apfelbaum1-1/+1
Needed to query machine's properties. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-11Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150310' into ↵Peter Maydell1-58/+358
staging s390x/kvm: Features and fixes for 2.3 - an extension to the elf loader to allow relocations - make the ccw bios relocatable. This allows for bigger ramdisks or smaller guests - Handle all slow SIGPs in QEMU (instead of kernel) for better compliance and correctness - tell the KVM module the maximum guest size. This allows KVM to reduce the number or page table levels - Several fixes/cleanups # gpg: Signature made Wed Mar 11 10:17:13 2015 GMT using RSA key ID B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" * remotes/borntraeger/tags/s390x-20150310: s390-ccw: rebuild BIOS s390/bios: Make the s390-ccw.img relocatable elf-loader: Provide the possibility to relocate s390 ELF files s390-ccw.img: Reinitialize guessing on reboot s390-ccw.img: Allow bigger ramdisk sizes or offsets s390x/kvm: passing max memory size to accelerator virtio-ccw: Convert to realize() virtio-s390: Convert to realize() virtio-s390: s390_virtio_device_init() can't fail, simplify s390x/kvm: enable the new SIGP handling in user space s390x/kvm: deliver SIGP RESTART directly if stopped s390x: add function to deliver restart irqs s390x/kvm: SIGP START is only applicable when STOPPED s390x/kvm: implement handling of new SIGP orders s390x/kvm: trace all SIGP orders s390x/kvm: helper to set the SIGP status in SigpInfo s390x/kvm: pass the SIGP instruction parameter to the SIGP handler s390x/kvm: more details for SIGP handler with one destination vcpu s390x: introduce defines for SIGP condition codes synchronize Linux headers to 4.0-rc3 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-10s390x/kvm: passing max memory size to acceleratorDominik Dingel1-0/+45
With "KVM: s390: Allow userspace to limit guest memory size" KVM is able to do some optimizations based on the guest memory limit. The guest memory limit is computed by the initial definition and with the notion of hotplugged memory. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1425570981-40609-3-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: enable the new SIGP handling in user spaceDavid Hildenbrand1-0/+3
All required SIGP handlers have been implemented in QEMU. Let's enable the new sigp handling in user space if the kernel supports it. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-11-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: deliver SIGP RESTART directly if stoppedDavid Hildenbrand1-2/+11
According to the PoP, a restart irq has to be delivered "without first honoring any other pending interruptions", if a cpu is in the STOPPED state. While it is hard to implement this case in kvm, it can easily be handled in qemu. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-10-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: SIGP START is only applicable when STOPPEDDavid Hildenbrand1-0/+5
In preparation for other CPU states, SIGP START will only start a VCPU if it is in the STOPPED state. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-8-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: implement handling of new SIGP ordersDavid Hildenbrand1-3/+201
This patch adds handling code for the following SIGP orders: - SIGP SET ARCHITECTURE - SIGP SET PREFIX - SIGP STOP - SIGP STOP AND STORE STATUS - SIGP STORE STATUS AT ADDRESS SIGP STOP (AND STORE STATUS) are the only orders that can stay pending forever (and may only be interrupted by resets), so special care has to be taken about them. Their status also has to be tracked within QEMU. This patch takes care of migrating this status (e.g. if migration happens during a SIGP STOP). Due to the BQL, only one VCPU is currently able to execute SIGP handlers at a time. According to the PoP, BUSY should be returned if another SIGP order is currently being executed on a VCPU. This can only be implemented when the BQL does not protect all handlers. For now, all SIGP orders on all VCPUs will be serialized, which will be okay for the first shot. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-7-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: trace all SIGP ordersDavid Hildenbrand1-1/+3
This patch adds tracing code for all SIGP orders (including the destination vcpu and the resulting condition code). Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-6-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: helper to set the SIGP status in SigpInfoDavid Hildenbrand1-3/+8
Whenever we set the SIGP status in the status register, we have to wipe out the lower 4 bytes and keep the higher 4 bytes. Also the condition code will always be set to STATUS_STORED. Let's introduce the wrapper for SigpInfo, as this will avoid most duplicate code in the future. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-5-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: pass the SIGP instruction parameter to the SIGP handlerDavid Hildenbrand1-2/+6
The parameter of the SIGP instruction will be neded in the future. Let's read it out and store it in the struct sigp_info, so it can be passed to the sigp handlers. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-4-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: more details for SIGP handler with one destination vcpuDavid Hildenbrand1-62/+91
Whenever a sigp order is to be executed by a target vcpu, we use run_on_cpu(). As we have only one pointer to pass all data to these sigp handlers, let's introduce the struct sigp_info and use it as a transport container. All orders targeting a single vcpu are now dispatched from a separate handler. The destination vcpu is only valid for these orders and must not be checked for SIGP SET ARCHITECTURE. The sigp_info is filled with life in this new handler and used to pass the information about the sigp order to the existing handlers. The cc is set within these handlers. Rename sigp_cpu_start() and sigp_cpu_restart() on the way to match the SIGP order names (in order to avoid touching affected lines several times). Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-3-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 07:42:39 +0000