| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This adds a new POWER8+NVLink CPU PVR which core is identical to POWER8
but has a different PVR. The only available machine now has PVR
pvr 004c 0100 so this defines "POWER8NVL" alias as v1.0.
The corresponding kernel commit is
https://github.com/torvalds/linux/commit/ddee09c099c3
"powerpc: Add PVR for POWER8NVL processor"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
We never released anything older than POWER8 DD2.0 and POWER8E DD2.1,
so let's use these versions, without that some firmware or Linux code
might fail to use some HW features that were non functional in earlier
internal only spins of the chip.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
|
|
IBM uses low 16bits to specify the chip version of a POWER CPU.
So there has never been an actual silicon with PVR = 0x003B0000.
The first silicon would have PVR 0x003B0100 but it is very unlikely
to find it in any machine shipped to any customer as it was too raw.
This removes CPU_POWERPC_POWER5P_v00 definition and changes
POWER5+ and POWERgs aliases (which are synonyms) to point to
POWER5+_v2.1 which can still be found in real machines.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[agraf: fix commit message]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
5b79b1c "target-ppc: Create versionless CPU class per family if KVM" added
a dynamic CPU class registration with the name of the CPU family which
QEMU is running on. For example, this allowed specifying "-cpu POWER7"
on every version of POWER7 machine, not just the one which POWER7 was
an alias of. I.e. before 5b79b1c, "-cpu POWER7" would not work on real
POWER7 2.1 and would work on POWER7 2.3 only. The same story for POWER8.
However that patch broke POWER5+ support as POWER5+ CPU uses the same
name as the CPU class so dynamic registering of the POWER5+ class failed.
This redefines POWER5+ server CPUs by adding a version to them and adding
an alias for TCG case. KVM will use dynamically registered CPUs.
While we are here, do the same for 970 CPU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This patch add a new processor type 440x5wDFPU for Virtex 5 PPC440
with an external APU FPU in double precision mode
Signed-off-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
POWER8E is architecturally equal to POWER8 and POWER7+ is equal to
POWER7. Also no user space tool makes any difference for CPU node name
in the device tree (such as PowerPC,POWER7@0 vs. PowerPC,POWER7+@0).
So there is no point in emulating POWER7+ and POWER8E apart from POWER7
and POWER8. Also, the previos patch implemented multiple PVR mask support
per CPU class so POWER7 class now covers both POWER7 and POWER7+ CPUs,
same is valid for POWER8/8E.
This removes POWER7+ and POWER8E classes. This replaces references
to POWER7P/POWER8E families with POWER7/POWER8 families.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
So far it was enough to have a base PVR value and mask per CPU
family such as POWER7 or POWER8. However there CPUs which are
completely architecturally compatible but have different PVRs such
as POWER7/POWER7+ and POWER8/POWER8E. For these CPUs, top 16 bits
are CPU family and low 16 bits are the version. The families have
PVR base values different enough so defining a mask which
would cover both (or potentially more) CPUs within the family is
not possible.
This adds a pvr_match() callback to PowerPCCPUClass. The default
handler simply compares PVR defined in the class.
This implements ppc_pvr_match_power7/ppc_pvr_match_power8 callbacks
for POWER7/8 families. These check for POWER7/POWER7+ and POWER8/POWER8E.
This changes ppc_cpu_compare_class_pvr_mask() not to check masks but
use the pvr_match() callback.
Since all server CPUs use the same mask, this defines one mask
value - CPU_POWERPC_POWER_SERVER_MASK - which is used everywhere now.
This removes other mask definitions.
This removes pvr_mask from PowerPCCPUClass as it is not used anymore.
This removes pvr initialization for POWER7/8 families as it is not used
to find the class, the pvr_match() callback is used instead.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
At the moment QEMU knows about one version of POWER8 CPU with
PVR 0x4B.0000. This CPU class is defined as "POWER8". The linux
kernel names it as "POWER8E" which is different from the name QEMU uses.
Now we get another version of POWER8 which is architecturally equivalent
to POWER8E but has different PVR 0x4D.0000 so QEMU fails to find
a PPC CPU class on these machines. The linux kernel names these CPUs as
"POWER8".
This renames the existing "POWER8" to "POWER8E" to be more precise and
stay in sync with the linux kernel.
This adds a new "POWER8" family which calls POWER8E class init function
and defines own PVR mask (used to match a CPU class) and desc (used to
create dynamic version-less CPU class).
This does not change CPU class fw_name attribute as the host POWER8
firmware keeps using "PowerPC,POWER8" on both POWER8 and POWER8E.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The differences between classes were:
1. SLB size, was 32 for 970 and 64 for others, should be 64 for all;
2. check_pow() callback, HID0 format is the same so should be the same
0x01C00000 which means "deep nap", "doze" and "nap" bits set;
3. LPCR - 970 does not have it but 970MP had one (by mistake).
This fixes wrong differences and makes one 970 class.
This fixes wrong registration of LPCR which is not present on 970.
This defines HID0 bits and uses them in check_pow_970().
This does not copy MSR_SHV (Hypervisor State, HV) bit from 970FX to
970 class as we do not emulate hypervisor in QEMU anyway.
This does not remove check_pow_970FX now as it is still used by POWER5+
class, this will be addressed later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Our pre-e500mc e500 CPU types didn't get instanciated with SVR information,
even though those systems do support the SVR register.
Spawn them with the SVR tag so that they don't get confused when someone tries
to read SPR_SVR.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
At the moment there are 3 versions of POWER7 CPUs defined. However
we do not emulate these CPUs diffent and it does not make much
sense to keep them all.
This removes POWER7_v2.0 and POWER7_v2.1 and leaves just one versioned
CPU per family which is POWER7_v2.3 with POWER7 alias.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The 970GX definition was added in 2007 and it made sense then but this
version has never been released to the markets and it does not exist in
the real world so there is no point in emulating it.
This removes 970GX.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
So far POWER7+ was a part of POWER7 family. However it has a different
PVR base value so in order to support PVR masks, it needs a separate
family class.
This adds a new family class, PVR base and mask values and moves
Power7+ v2.1 CPU to a new family. The class init function is copied
from the POWER7 family.
This defines a firmware name for the new family as "PowerPC,POWER7+"
instead of previously used "PowerPC,POWER7" from the POWER7 family.
The reason for that is that the Sapphire firmware (a h0st firmware)
uses "PowerPC,POWER7+" already and since no specification defines
exactly the CPU nodes naming in the device tree, we better stay
in sync with the host firmware.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
IBM POWERPC processors encode PVR as a CPU family in higher 16 bits and
a CPU version in lower 16 bits. Since there is no significant change
in behavior between versions, there is no point to add every single CPU
version in QEMU's CPU list. Also, new CPU versions of already supported
CPU won't break the existing code.
This adds PVR value/mask support for KVM, i.e. for -cpu host option.
As CPU family class name for POWER7 is "POWER7-family", there is no need
to touch aliases.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Let's avoid -cpu host barfing at this PVR.
Linux recognizes it as "POWER5+ (gs) v2.1".
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375321323-29954-5-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
It is ISA 2.03. Modelled as 970FX minus AltiVec flag.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375321323-29954-4-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375321323-29954-3-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375321323-29954-2-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Commit 03a15a5436ed7723f406f15cc3798aa9991e75b5 claimed to add a POWER7+
model but instead added a "POWER7P" model, with an unhelpful "POWER7P"
description on top. Fix this to "POWER7+" as we already have "POWER3+",
"POWER4+" and "POWER5+" and there being no reason to deviate with the
user-visible command line -cpu POWER7P from the marketing name POWER7+.
Further, don't needlessly deviate from the scheme of naming PVR constant,
QOM type and device description after the exact revision that is in fact
encoded in the PVR used.
That way, we can change the user-friendly alias -cpu POWER7+ to point to a
different revision if we so desire, while not polluting the type namespace.
This naming scheme is sensible and completely orthogonal to how PVRs may
or may not get matched to CPU types.
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375736387-8429-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds CPU PVR definition for POWER7+.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1375412374-24701-1-git-send-email-aik@ozlabs.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds CPU PVR definition for POWER8,
and enables QEMU to launch guests on POWER8 hardware.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Andreas Farber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
MPC86xx processors are based on the e600 core, which is not the case
in qemu where it is based on the 7400 processor.
This patch creates the e600 core and instantiates the MPC86xx
processors based on it. Therefore, adding the high BATs, the SPRG
4..7 registers, which are e600-specific [1], and a HW MMU model (as 7400).
This allows to define the MPC8610 processor too.
Tested with a kernel using the HW TLB misses.
[1] http://cache.freescale.com/files/32bit/doc/ref_manual/E600CORERM.pdf
Signed-off-by: Julio Guerra <guerr@julio.in>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When running QEMU with "-cpu ?" we walk through every alias for every
target CPU we know about. This takes several seconds on my very fast
host system.
Let's introduce a class object cache in the alias table. Using that we
don't have to go through the tedious work of finding our target class.
Instead, we can just go directly from the alias name to the target class
pointer.
This patch brings -cpu "?" to reasonable times again.
Before:
real 0m4.716s
After:
real 0m0.025s
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The PowerPC 620 was the very first 64-bit PowerPC implementation, but
hardly anyone ever actually used the chips. qemu notionally supports the
620, but since we don't actually have code to implement the segment table,
the support is broken (quite likely in other ways too).
This patch, therefore, removes all remaining pieces of 620 support, to
stop it cluttering up the platforms we actually care about. This includes
removing support for the ASR register, used only on segment table based
machines.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Move array of CPU aliases to cpu-models.c, alongside model definitions.
This requires to zero-terminate the aliases array since ARRAY_SIZE() can
no longer be used in translate_init.c then.
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
controler -> controller
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Now that model definitions only reference their parent type, model
definitions are independent of the family definitions and can be
compiled independently of TCG translation.
Keep all #if defined(TODO) code local to cpu-models.c.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
